Johnson, C. E.
1. "Coating of Al-SiC Composite Thermal Management Components," Lanxide Electronic Components LP, Newark, DE, December 1994.
2. "Alternative Dental Restorative", NIDR Dental Student Research Conference, NIST, March 1995.
Moffat, T. P.
1. "Electrodeposition of Alloys," 2nd Annual Joint AESF/NIST Workshop on Electrodeposition, NIST, November 11, 1994.
2. "Electrodeposition of Cu-Ni Multilayers," Symposium on Nanostructured Materials in Electrochemistry, 187th Electrochemical Society Meeting, Reno, NV, May 24, 1995.
3. "Electrochemical Synthesis of Multilayer Materials," Workshop on Nanoscale Layered Materials for Protective Coating and Structural Applications, NSF-NIST, August 14, 1995.
4. "On the Passive State of Chromium Alloys," NACE Baltimore/Washington Section, October 20, 1994.
Stafford, G, R.
1. "Aluminum Alloy Deposition from Chloroaluminate Electrolytes," Gordon Research Conference on Molten Salts and Liquid Metals, Plymouth State College, Plymouth, NH, August 6-11, 1995.
2. "The Electrodeposition of Al-Ti Alloys from Chloroaluminate Electrolytes," Stevens Institute of Technology, Hoboken, NJ, November 16, 1994.
3. L. A. Bendersky and G. M. Janowski, "The Structure of Electrodeposited Al-Ti Alloys," Proc. of Symposium on Defect Structure, Morphology, and Properties of Vapor and Electrodeposits, TMS Fall Meeting, Rosemont, Il, October 2-6, 1994.
Magnetic Materials Group
Bennett, L. H.
1. "Magnetic Refrigeration," G. W. University, February 8, 1995.
Egelhoff, W. F.
1. "Surface and Interfacial Roughness in GMR Multilayers by STM," National Storage Industry Consortium Quarterly Workshop, Minneapolis, October 7, 1994.
2. "Recent Studies of GMR Multilayers at NIST," Surface Science Lunch Group Seminar, NIST, December 12, 1994.
3. "Recent Studies of GMR Multilayers at NIST," Metallurgy Division Seminar, NIST, January 5, 1995.
4. "GMR Exceeding 21% in Simple Spin Valves," National Storage Industry Consortium Quarterly Workshop, San Diego, January 12, 1995.
5. "Low Temperature Epitaxy in Metal on Metal Systems," Workshop on Fundamental Processes in Epitaxy, Bonn, Germany, February 14, 1995.
6. "Surfactant Assisted Growth of GMR Spin Valves," National Storage Industry Consortium Quarterly Workshop, San Jose, March 25, 1995.
7. "Surface Segregation and Interdiffusion in Metal/Metal Systems," American Chemical Society National Meeting, Anaheim, April 2, 1995.
8. "Structure, Morphology, and GMR of Symmetric Spin Valves," Materials Research Society, San Francisco, April 20, 1995.
9. "Thermal Degradation of Spin Valve Components," Materials Research Society, San Francisco, April 18, 1995.
10. "Low Temperature Growth of GMR Spin Valves," (poster) Materials Research Society, San Francisco, April 20, 1995.
11. "The Magnetic Engineering Research Facility," ARPA/NRL/ONR Workshop on Magnetic Materials, Arlington, May 16, 1995.
12. "The Structure and Properties of GMR Multilayers," Read-Rite Corporate Research Labs, Fremont, CA, May 31, 1995.
13. "Optimizing the Performance of GMR Multilayers," National Storage Industry Consortium Annual Review, Monterey, June 1, 1995.
14. "Optimized Growth of GMR Multilayers," (poster) 2nd International Conference on Magnetic Multilayers, Cambridge, England, September 14, 1995.
15. "Recent Studies of GMR Multilayers at NIST," National Storage Industry Consortium Quarterly Workshop, Pittsburgh, September 21, 1995.
McMichael, R. D.
1. "FMR studies of annealed spin-valve component films," NSIC quarterly meeting, Oct 6-7, 1994, University of Minnesota, Minneapolis. (On unbiased Co and permalloy films.)
2. "The magnetocaloric effect in bulk and nanocomposite materials," University of Maryland, Baltimore Campus Physics Dept., Oct 12, 1994.
3. "Death of a spin valve II" NSIC quarterly meeting, Jan 12-13, 1995 Center for Magnetic Recording Research, UCSD. (On FeMn biased films and NiO biased symmetric spin valves).
4. "Spin valves from beyond the grave," NSIC quarterly meeting, March 22, 1995, IBM Homestead site, San Jose CA. (On thermally stable NiO-biased symmetric Cu/Co spin valves.)
5. "Ferromagnetic Resonance: How it works and what it does" Televised PL-EEEL magnetics seminar March 29, 1995.
Shull, R. D.
1. "The Nobel Experience", Convocation speaker, Mountaineering Youth Science Camp, Elkins, W. Virginia, August 10, 1995.
2. "Superparamagnetism in nanocomposite Magnetic Materials - (An Abbreviated Incomplete Overview)", EEEL/PL/MSEL Teleconference Seminar speaker, NIST, August 1, 1995.
3. "Superconductivity, Physics and Chemistry", Maryland State Governor's Academy for Mathematics, Science and Technology, NIST, July 12, 1995.
4. "Nanocomposite Materials", University of Minnesota Mechanical Engineering Department Seminar Speaker, Minneapolis, MN, May 18, 1995.
5. "The Enhanced Magnetocaloric Effect of Magnetic Nanocomposites", Materials and Molecular Chemistry seminar, Columbia University, April 18, 1995.
6. "Nanostructured Materials", Freshman seminar, Chemistry Dept., Columbia University, April 18, 1995.
7. "A Quick View of the 1994 Nobel Prize Ceremonies," Oak Ridge National Laboratory, April 10, 1995.
8. "Magnetic Applications of Nanocomposite Materials", Condensed Matter Physics seminar, Carnegie Mellon University, April 6, 1995.
9. "The 1994 Nobel Prize Ceremonies," Carnegie Mellon University, April 5, 1995.
10. "A Week of Experiences at the 1994 Nobel Prize Ceremonies," The Philosophical Society of Washington Meeting, Washington, DC, Feb. 3, 1995.
11. "The 1994 Nobel Ceremony: An Inside View," NIST Sigma Xi Chapter Meeting, NIST, Jan. 26, 1995.
12. "Nanocrystals for Magnetic Refrigeration," Workshop on Future Energy Applications of Nanostructured Materials, MIT Dec. 2, 1994.
13. "Magnetic Applications of Nanocomposite Materials," Materials Research Society Fall Meeting, Boston, Nov. 30, 1994.
14. "Nano-Composite Magnetic Refrigerants," Workshop on Nanoparticulates 94, Business Opportunities, Technologies, Markets, and Applications, Monterey, Nov. 15, 1994.
15. "NIST Activities in Nano-Structured Materials," Workshop on Nanoparticulates 94, Business Opportunities, Technologies, Markets, and Applications, Monterey, Nov. 14, 1994.
16. "Nanostructured Materials," National Educator's Workshop, NIST, Nov. 11, 1994.
17. "Magnetic Nanocomposites: Magnets of the Future?," ASM International Washington D.C. Chapter Meeting, Nov. 1, 1994.
18. "NIST Nanostructured Materials Activities," Dept. of Materials Science Seminar, Berlin Technical University, Berlin, Oct. 14, 1994.
19. "Magnetic Nanocomposites," First Colloquium Speaker for the Institute on Nanostructured Materials, Univ. of Saarlandes, Saarbruecken, Germany, Oct. 12, 1994.
20. "Magnetic Nanocomposites," Dept. of Materials Science Seminar Speaker, Univ. of Darmstadt, Darmstadt, Germany, Oct. 11, 1994.
21. "Magnetic Nanocomposites," Robert Bosch GmbH, Stuttgart, Germany, Oct. 10, 1994.
22. "The Enhanced Magnetocaloric Effect of Magnetic Nanocomposites," Second International Conference on Nanostructured Materials, Stuttgart, Germany, Oct. 7, 1994.
Swartzendruber, L. J.
1. "Magnetic Inspection," The American Society of Nondestructive Testing meeting in Atlanta, Fall 94.
2. "The Relationship of Magnetic and Mechanical Properties," American Iron and Steel Institute Meeting held in Cleveland, May 1995.
3. "Magnetic Particle Standards," The American Society of Nondestructive Testing, Greater Philadelphia Chapter, October 1995.
Weissmueller, J.
1. "Atomic Structure and Thermodynamic Functions of Nanocrystalline Solids"
2. "Materials Science Seminar, University of Wisconsin-Madison, February 16, 1995.
3. "Interdepartmental Seminar on Nanostructured Materials", Massachusetts Institute of Technology, February 22, 1995.
4. "Materials Science Seminar", Harvard University, February 23, 1995.
5. "Materials Science Seminar", Argonne National Laboratory, March 29, 1995.
6. "Materials Research Lab Seminar", University of Illinois in Urbana/Champaign, March 30, 1995.
7. "Atomic Short-Range Order in Nanocrystalline Solids from Atomic Distribution Functions," 9th International Conference on Liquid and Amoprhous Metals, Chicago, August 27 - September 1, 1995.
Materials Performance Group
deWit, Roland
1. "Aluminum Tearing," The National Educator's Workshop, Nov. 8, 1994.
2. An hour long lecture was given at the Training Course for Engineers and Standards Experts from the Newly Independent States (NIS), Rio Marriott, Gaithersburg, MD, March 8, 1995.
3. Co-authored a talk with Prof. R. W. Armstrong entitled "The Quantized Burgers Circuit: From Beginning to Present," presented at the Johannes M. Burgers Centenary Symposium, Univ. of Maryland, College Park, May 4, 1995.
4. "Fracture Testing of Large-Scale Thin Sheet Aluminum Alloy," 27th National Symposium on Fatigue Fracture Mechanics, Williamsburg, VA, June 26-29, 1995.
Fields, Richard
1. "Modeling the Consolidation of Particle Reinforced Aluminum," USCAR Meeting, Detroit, Oct. 10, 1994.
2. "Powder Consolidation Research at NIST," Workshop on Dynamic Magnetic Consolidation, IAP Research Inc., Dayton, Oct. 26, 1994.
3. "Large-Scale Mechanical Testing," National Educators Workshop, NIST, Gaithersburg, November 8, 1994.
4. "Lead-free Solders for Plumbing Applications," Inst. for Mechanics of Materials Workshop on Lead-free Solders, Chicago, July 25, 1995.
Foecke, Tim
1. "The Microscopy of Fracture," National Educators Workshop, Washington, DC, November 8, 1994.
2. "Processing and Mechanical Properties of Nanoscale Laminate Composites," NSF Institute for Mechanics and Materials, UCSD, LaJolla, CA, November 18, 1994.
3. "TEM Observations of Plastic Deformation and Fracture in Nanoscale Multilayered Materials," Workshop on Nanoscale Layered Materials for Protective Coating and Structural Applications, Gaithersburg, MD, August 15, 1995.
Smith, John H.
1. "The Development of National Hardness References Scales in the U.S.," ASM Materials Week, Rosemont, IL, Oct. 4, 1994.
2. "Advances in Hardness References Standard Scales," The XIII IMEKO World Congress - From Measurement to Innovation, Turin, Italy, September 5-0, 1994.
3. "Safety Considerations for New Cylinder Technology," U.S. DOT Symposium on Carbon-Fiber Composite Cylinders, May 26, 1994, Washington, DC.
Sturrock, C. P.
1. "Corrosion Engineering Informatics," Katholieke Universiteit Leuven (Belgium), Dept. of Metallurgy & Materials Engineering, March 7, 1995.
Materials Structure & Characterizaiton Group
Bendersky, L. A.
1. "Intermetallics," Wright Patterson Air Force Base in Dayton, OH, Sept. 18, 1995.
Drescher-Krasicka, E.
1. "Another Approach to Acoustic Elasticity," Seventh International Symposium on Nondestructive Characterization of Materials, Prague, Czech Republic, June 19, 1995.
2. "Acoustic Microscopy Application for Thin films Testing," 29th Annual Meeting of the Microbeam Analysis Society, Breckenridge, CO, August 6, 1995.
Gayle, F. W.
1. "Precipitation Hardening in the Wright Flyer Crankcase," Materials Science Seminar Series Newark, NJ, March 1, 1995.
Handwerker, C. A.
1. "Lead-Free Solder Consortium Meeting," in Dearborn, MI, November 3, 1994.
2. "Materials Research Society Fall Meeting," in Boston, MA., November 11, 1994.
3. "Stability of Interfaces," Brunswick, NJ, December 9, 1994.
4. "Solder-Free Consortium Meeting," in Dallas, TX., March 27, 1995.
5. "Materials Research Society 1995 Spring Meeting", in San Francisco, CA, April 18, 1995.
6. "Critical Issues in Reactive Wetting," Cincinnati, OH., May 1, 1995.
7. "Lead-Free Solder Alloy Consortium Meeting,A" in St. Louis, MO., July 19, 1995.
8. "Grain Growth in Anisotropic Materials," State College, PA., September 24, 1995.
Shapiro, A. J.
1. "Electron Microscopy," The Seventh Annual International Scientific Meeting," in Monterey, CA, March 31, 1995.
Warren, J. A.
1. "Phase-Field," Materials Research Society Fall Meeting, Boston, MA, November 11, 1994.
2. "Phase-Field Models of Alloy Solidification," City College, New York City, NY, April 26, 1995.
Metallurgical Processing
F. S. Biancaniello
1. "Control of BCC and FCC Phase Formation During Mechanical Alloying of Ti- Al-Nb," International Conference, Los Vegas, Nevada, Synthesis/Processing of Lightweight Metallic Materials, TMS, Feb. 1995.
2. "Processing and Characterization of Nitrogenerated Stainless Steel for Body and Extremity Applications," Symposium at Aberdeen Proving Grounds, Body Armor Insert Replacement Program in Progress Review/Covert Armor Discussions, March 8, 1995.
3. "Dramatically Improved Corrosion Behavior of 304L Stainless Steel Through Nitrogen Atomization," International Conference on Powder Metallurgy in Aerospace, Defense and Demanding Application, May 8-10, 1995.
4. "Minimization of Nitride Formation During Mechanical Alloying of Ti-Al-Nb, International Symposium on Metastable, Mechanically Alloyed and Nanocrystalline Materials, Quebec, Canada, July 1995.
W. J. Boettinger
1. "A Phase-Field Diffuse Interface Solidification Model for Binary Alloys," Materials Week, Rosemont, IL, October 4, 1994.
2. "Reactive Wetting of Solder," Virginia Polytechnic and State University, Blacksburg, VA, October 21, 1994.
3. "Multicomponent Alloy Solidification," Semi-Annual Meeting, Consortium on Casting of Aerospace Alloys, American Foundryman's Society, DesPlaines, IL, Nov. 7, 1994.
4. "Alpha-case Formation in Ti Castings," Semi-Annual Meeting, Consortium on Casting of Aerospace Alloys, American Foundryman's Society, DesPlaines, IL, Nov. 7, 1994.
5. "Reactive Wetting of Solder," Dept. of Materials Science and Engineering, Iowa State University, Ames, IA, November 29, 1994.
6. "A Phase-Field Diffuse Interface Solidification Model for Binary Alloys," Department of Mechanical Engineering, University of Iowa, December 1, 1994.
7. "The Future of Phase Diagrams for prediction of Fraction Solid vs. Temperature Relationships, ProCASTTM User's Group Meeting, Annapolis, MD, March 30, 1995.
8. "Dendritic Growth: From Fundamental Studies to Superalloys", AT&T Distinguished Lecturer: Materials Science Seminar Series, University of Wisconsin, Madison, WI, April 6, 1995.
9. "Multicomponent Alloy Solidification," Annual Meeting, Consortium on Casting of Aerospace Alloys, NIST, May 4, 1995,
10. "Alpha-case Formation in Ti Castings," Annual Meeting, Consortium on Casting of Aerospace Alloys, NIST, May 4, 1995.
11. "A Phase-Field Diffuse Interface Solidification Model for Binary Alloys," Department of Materials Science and Metallurgy, Cambridge University, September 21, 1995.
S. R. Coriell
1. "The Effect of Shear Flow and Anisotropic Kinetics on the Morphological Stability of a Binary Alloy: Self-Stabilization of Step Trains, International Conference on Crystal Growth XI, Netherlands, June 18-23, 1995.
S. D. Ridder
1. "Control of Particle Size During Inert Gas Atomization," International Conference on Powder Metallurgy in Aerospace, Defense amd Demanding Applications, Anaheim, CA, May 1995.
J. A. Simmons
1. "On the Superposition of Probabilities I; Partition Lattices and the Moebius Formalism," International Workshop on the Theory and Applications of the Cluster Variation and Path Probability Methods, Mexico, June 1995.
Back to Table of ContentsLast modified: Mon Jan 06 09:46:15 1997 Metallurgy Webmeister