NOVA Machine Prod., a sub. of Curtiss-Wright Flow Control Srv.NVLAP Lab Code: 200202-0
Address and Contact Information:
a sub. of Curtiss-Wright Flow Control
18001 Sheldon Road
Middleburg Heights, OH 44130-2471
Contact: Mr. David Nenstiel
Phone: 216-898-8017
Fax: 216-267-8524
E-Mail: dnenstiel@curtisswright.com
Send E-Mail to Laboratory: NOVA Machine Products
URL: http://www.novamachine.com
NVLAP Accreditation Information
Listed below is the scope of accreditation for this laboratory as of January 30, 2009. For additional information, contact NVLAP at (301) 975-4016.
Send E-Mail to NVLAP at: NVLAP@nist.gov
Fasteners & Metals
Accreditation Valid From: January 1, 2009 Through: December 31, 2009
Chemical Analysis
- Optical emission spectrochemical analysis
[FA/457] ASTM E415
Method for Optical Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
[FA/459] ASTM E1086
Method for Optical Emission Vacuum Spectrometric Analysis of Stainless Steel by the Point-to-Plane Excitation Technique
Mechanical and Physical Testing and Inspection
- Axial tensile strength of full-size threaded fasteners
[FA/265] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products
Annex A3 - Steel Fasteners, Section A3.2.1.4: Axial Tension Testing of Full Size Bolts
[FA/266] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Sections 3.4.1 through 3.4.3: Axial Tension Testing of Full Size Products
[FA/273] SAE J429
Mechanical and Material Requirements for Externally Threaded Fasteners
[FA/274] SAE J1216
Test Methods for Metric Threaded Fasteners, Section 3.5: Axial Tensile Strength
[FA/687] ISO 6892
Metallic Materials - Tensile Testing
- Charpy impact (v-notch) testing
[FA/211] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products Sections 19 to 28 Charpy Impact Testing
[FA/212] ASTM E23
Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- Compression test of washers
[FA/726] ASME B18.21.1
Lock Washers (Inch Series)
- Cone proof load of internally threaded fasteners (nuts)
[FA/220] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.3: Cone Proof Load Test
[FA/717] ANSI/ASME B18.6.4
Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws (Inch Series)
[FA/750] SAE J933
Mechanical and Quality Requirements for Tapping Screws
- Embrittlement test of washers
[FA/313] ASME B18.21.1
Lock Washers (Inch Series)
[FA/482] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets
- Microhardness of fasteners
[FA/189] ASTM E384
Standard Test Method for Microhardness of Materials
- Proof load of full-size externally threaded fasteners
[FA/225] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products Annex A3 - Steel Fasteners, Sections A3.2.1.1 through A3.2.1.3 : Proof Load
[FA/226] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets.
Sections 3.2.1 through 3.2.3: Proof Load (Length Measurement)
[FA/229] SAE J429
Mechanical and Material Requirements for Externally Threaded Fasteners
[FA/230] SAE J1216
Test Methods for Metric Threaded Fasteners, Section 3.3: Proof Load (Length Measurement)
- Proof load of internally threaded fasteners (nuts)
[FA/235] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products.
Annex A3 - Steel Fasteners, Section A3.5.1: Proof Load
[FA/236] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets. Section 4.2: Proof Load Test
[FA/241] SAE J995
Mechanical and Material Requirements for Steel Nuts. Section 5.1: Proof Load Test
[FB/1306] ASTM F912
Standard Specification for Alloy Steel Socket Set Screws
- Rockwell hardness of fasteners
[FA/196] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products Section 17. Rockwell Test (ASTM E18 is referenced for detailed requirements)
[FA/197] ASTM E18 (A, B, & C)
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
[FA/202] SAE J417
Hardness Tests and Hardness Number Conversions (ASTM E18 is referenced for detailed requirements)
[FB/1308] ISO 6508-1
Metallic Materials - Rockwell Hardness Test - Part 1: Test Method (Scales A, B, C, 30N, & 30T)
- Rockwell superficial hardness of fasteners
[FA/206] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products Section 17. Rockwell Test
[FA/210] SAE J417
Hardness Tests and Hardness Number Conversions (ASTM E18 is referenced for detailed requirements)
[FB/1309] ASTM E18 (30N & 30T)
Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials
- Tension testing of machined specimens from externally threaded fasteners
[FA/278] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products
Annex A3 - Steel Fasteners, Section A3.2.1.7: Tension Testing of Bolts Machined to Round Test Specimens
[FA/279] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets.
Section 3.6: Tension Testing of Machined Test Specimens
[FA/283] SAE J429
Mechanical and Material Requirements for Externally Threaded Fasteners
[FA/475] ASTM E8
Standard Test Methods for Tension Testing of Metallic Materials
[FA/580] ISO 6892
Metallic Materials - Tensile Testing
- Torsional strength test of thread rolling and self-drilling tappings screws
[FA/253] SAE J78
Steel Self-Drilling Tapping Screws
[FA/751] SAE J933
Mechanical and Quality Requirements for Tapping Screws
[FB/1305] ANSI/ASME B18.6.4
Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws (Inch Series)
- Total extension at fracture of externally threaded fasteners
[FA/285] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets.
Section 3.7: Total Extension at Fracture Test
[FA/725] ISO 6892
Metallic Materials - Tensile Testing
- Twist test of lock washers
[FA/321] ASME B18.21.1
Lock Washers (Inch Series)
- Wedge tensile strength of full-size threaded fasteners
[FA/289] ASTM A370
Standard Test Method and Definitions for Mechanical Testing of Steel Products, Annex A3 - Steel Fasteners, Section A3.2.1.5: Tension Testing of Full Size Bolts with a Wedge, and Section A3.2.1.6: Wedge Testing of HT Bolts Threaded to Head
[FA/290] ASTM F606
Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets.
Section 3.5: Wedge Tension Testing of Full Size Bolts
[FA/468] SAE J429
Mechanical and Material Requirements for Externally Threaded Fasteners
[FA/469] SAE J1216
Test Methods for Metric Threaded Fasteners, Section 3.6: Wedge Tensile Strength
[FA/688] ISO 6892
Metallic Materials - Tensile Testing
Metallography
- Decarburization and case depth measurement in fasteners
[FA/323] ASTM E1077
Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens
[FA/328] SAE J121
Decarburization in Hardened and Tempered Unified Threaded Fasteners
[FA/483] ASTM A574
Standard Specification for Alloy Steel Socket-Head Cap Screws; Section 12
[FA/561] ASTM E3
Standard Practice for Preparation of Metallographic Specimens
[FA/964] ASTM A490
Heat-Treated Steel Structural Bolts, 150 ksi Minimum Tensile Strength
- Macroscopic examination of fasteners by etching
[FA/484] ASTM E381
Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings.
[FA/511] ASTM E340
Standard Test Method for Macroetching Metals and Alloys
- Surface discontinuities of externally threaded fasteners
[FA/357] ASTM F788/788M
Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
[FA/359] ISO 6157-1
Fasteners - Surface Discontinuities - Part 1: Bolts, Screws, and Studs for General Requirements
[FA/360] ISO 6157-3
Fasteners - Surface Discontinuities - Part 3: Bolts, Screws, and Studs for Special Requirements
[FA/361] SAE J123
Surface Discontinuities on Bolts, Screws, and Studs in Fatigue Applications
- Surface discontinuities of internally threaded fasteners
[FA/363] ASTM F812
Standard Specification for Surface Discontinuities of Nuts, Inch Series
[FA/365] SAE J122
Surface Discontinuities on Nuts
[FA/727] ISO 6157-2
Fasteners - Surface Discontinuities - Part 2: Nuts
Nondestructive Inspection
- Liquid penetrant inspection of fasteners
[FA/367] ASTM E165
Standard Practice for Liquid Penetrant Inspection Method
[FA/370] MIL-STD-271
Requirements for Nondestructive Testing Methods
[FA/371] MIL-STD-6866
Inspection, Liquid Penetrant
[FA/372] SAE J426
Liquid Penetrant Test Methods
[FA/527] ASTM E1417
Standard Practice for Liquid Penetrant Examination
- Magnetic particle inspection of fasteners
[FA/374] ASTM E709
Standard Practice for Magnetic Particle Examination
[FA/376] MIL-STD-271
Requirements for Nondestructive Testing Methods
[FA/377] MIL-STD-1949
Military Standard, Inspection, Magnetic Particles
[FA/378] SAE J420
Magnetic Particle Inspection
[FA/485] ASTM E1444
Standard Practice for Magnetic Particle Inspection
[FB/1208] ASTM A275/A275M
Magnetic Particle Examination of Steel Forgings
[FB/1231] ASTM A388/A 388M
Standard Practice for Ultrasonic Examination of Heavy Steel Forgings
[FB/1232] ASTM A577/A 577M
Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
[FB/1233] ASTM A578/A578M
Standard Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications
[FB/1234] ASTM A745/A 745M
Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
[FB/1235] ASTM E114
Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Examination by the Contact Method
[FB/1236] ASTM E273
Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing
[FB/1307] MIL-STD-271
Requirements for Nondestructive Testing Methods
Return to NVLAP Program Listing
NVLAP Home |
Accredited Laboratories |
Fields of Accreditation |
Publications/Applications |
Mutual Recognition Arrangements |
Assessor Resources |
Contact NVLAP
For questions concerning the National Voluntary Laboratory Accreditation Program, contact us:
National Voluntary Laboratory Accreditation Program, Standards Services Division, NIST, 100 Bureau Drive, Stop 2140, Gaithersburg, MD 20899-2140
Phone: (301) 975-4016, Fax: (301) 926-2884, Email: NVLAP@nist.gov
Date created: July 26, 2002
Last Updated: January 30, 2009
Privacy
Statement / Security Notice / Accessibility Statement | Disclaimer
| FOIA
|