! Started logfile: J0336+3218_X_2006_02_16_yyk_uvs.log on Wed Jul 5 11:15:03 2006 obs J0336+3218_X_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J0336+3218_X_2006_02_16_yyk_uva.fits ! AN table 1: 231 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.805195 visibilities/baseline/integration-bin. ! Found source: J0336+3218 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2424 lines of history. ! ! Reading 33480 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0336+3218_X_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.28575 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7327 mas, bmaj=2.193 mas, bpa=-25.82 degrees ! Estimated noise=1.98567 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.04397 Jy ! Component: 100 - total flux cleaned = 1.2596 Jy ! Total flux subtracted in 100 components = 1.2596 Jy ! Clean residual min=-0.073760 max=0.123977 Jy/beam ! Clean residual mean=-0.001601 rms=0.023707 Jy/beam ! Combined flux in latest and established models = 1.2596 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 1.2596 Jy ! ! Correcting IF 1. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.332801Jy sigma=5.545552 ! Fit after self-cal, rms=0.332622Jy sigma=5.505766 ! Inverting map and beam ! Estimated beam: bmin=0.7327 mas, bmaj=2.193 mas, bpa=-25.82 degrees ! Estimated noise=1.98567 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9042 mas, bmaj=2.287 mas, bpa=-25.03 degrees ! Estimated noise=1.41964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.124882 Jy ! Component: 100 - total flux cleaned = 0.19329 Jy ! Component: 150 - total flux cleaned = 0.215254 Jy ! Component: 200 - total flux cleaned = 0.222797 Jy ! Total flux subtracted in 200 components = 0.222797 Jy ! Clean residual min=-0.073636 max=0.120695 Jy/beam ! Clean residual mean=-0.001733 rms=0.023078 Jy/beam ! Combined flux in latest and established models = 1.4824 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 1.4824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.296330Jy sigma=4.815082 ! Fit after self-cal, rms=0.296471Jy sigma=4.811413 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9042 x 2.287 at -25.03 degrees (North through East) ! Clean map min=-0.069032 max=1.2194 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.992719 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 0.90 KP 0.94 ! LA 0.91 MK 1.04 NL 1.35 OV 1.00 ! PT 0.95 SC 0.96 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01092 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.05 HN 0.90 KP 0.87 ! LA 0.88 MK 1.01 NL 1.33 OV 1.00 ! PT 0.96 SC 0.93 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.99944 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.09 HN 0.84 KP 0.81 ! LA 0.90 MK 1.04 NL 1.31 OV 1.03 ! PT 0.97 SC 0.93 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.986299 ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.13 HN 0.87 KP 0.84 ! LA 0.89 MK 1.06 NL 1.26 OV 1.06 ! PT 1.04 SC 0.96 ! ! ! Fit before self-cal, rms=0.296471Jy sigma=4.811413 ! Fit after self-cal, rms=0.211821Jy sigma=3.466866 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.211821Jy sigma=3.466866 ! Fit after self-cal, rms=0.211785Jy sigma=3.465377 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9155 mas, bmaj=2.268 mas, bpa=-24.7 degrees ! Estimated noise=1.38512 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.6, -4). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.111588 Jy ! Component: 100 - total flux cleaned = 0.135427 Jy ! Component: 150 - total flux cleaned = 0.145272 Jy ! Component: 200 - total flux cleaned = 0.153654 Jy ! Total flux subtracted in 200 components = 0.153654 Jy ! Clean residual min=-0.020258 max=0.020506 Jy/beam ! Clean residual mean=-0.000076 rms=0.005293 Jy/beam ! Combined flux in latest and established models = 1.63605 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 56 components and 1.63605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170575Jy sigma=2.525702 ! Fit after self-cal, rms=0.170094Jy sigma=2.515514 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170094Jy sigma=2.515514 ! Fit after self-cal, rms=0.114213Jy sigma=1.625286 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00955913 Jy ! Component: 100 - total flux cleaned = 0.0126668 Jy ! Component: 150 - total flux cleaned = 0.0159356 Jy ! Component: 200 - total flux cleaned = 0.0187658 Jy ! Total flux subtracted in 200 components = 0.0187658 Jy ! Clean residual min=-0.018074 max=0.017288 Jy/beam ! Clean residual mean=0.000010 rms=0.004610 Jy/beam ! Combined flux in latest and established models = 1.65482 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 71 components and 1.65482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109455Jy sigma=1.532463 ! Fit after self-cal, rms=0.104251Jy sigma=1.453751 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9155 x 2.268 at -24.7 degrees (North through East) ! Clean map min=-0.024582 max=1.2157 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104251Jy sigma=1.453751 ! Fit after self-cal, rms=0.097422Jy sigma=1.319224 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097422Jy sigma=1.319224 ! Fit after self-cal, rms=0.097084Jy sigma=1.312929 ! Inverting map and beam ! Estimated beam: bmin=0.9217 mas, bmaj=2.276 mas, bpa=-24.55 degrees ! Estimated noise=1.37961 mJy/beam. ! Added new window around map position (-5.8, 3.8). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00679822 Jy ! Component: 100 - total flux cleaned = 0.0103312 Jy ! Component: 150 - total flux cleaned = 0.0108004 Jy ! Component: 200 - total flux cleaned = 0.0111618 Jy ! Total flux subtracted in 200 components = 0.0111618 Jy ! Clean residual min=-0.014133 max=0.012892 Jy/beam ! Clean residual mean=0.000067 rms=0.003167 Jy/beam ! Combined flux in latest and established models = 1.66598 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 88 components and 1.66598 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090545Jy sigma=1.181574 ! Fit after self-cal, rms=0.090455Jy sigma=1.176682 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090455Jy sigma=1.176682 ! Fit after self-cal, rms=0.088178Jy sigma=1.140250 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088178Jy sigma=1.140250 ! Fit after self-cal, rms=0.088184Jy sigma=1.140189 ! Inverting map and beam ! Estimated beam: bmin=0.9214 mas, bmaj=2.282 mas, bpa=-24.57 degrees ! Estimated noise=1.37845 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143493 Jy ! Component: 100 - total flux cleaned = -0.001382 Jy ! Component: 150 - total flux cleaned = -0.00224463 Jy ! Component: 200 - total flux cleaned = -0.00302646 Jy ! Total flux subtracted in 200 components = -0.00302646 Jy ! Clean residual min=-0.011567 max=0.010566 Jy/beam ! Clean residual mean=0.000052 rms=0.002559 Jy/beam ! Combined flux in latest and established models = 1.66296 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 110 components and 1.66296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085713Jy sigma=1.090318 ! Fit after self-cal, rms=0.085721Jy sigma=1.089446 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=2.748 mas, bpa=-16.86 degrees ! Estimated noise=1.74188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 5.84699e-05 Jy ! Component: 100 - total flux cleaned = -0.00190253 Jy ! Component: 150 - total flux cleaned = -0.0035635 Jy ! Component: 200 - total flux cleaned = -0.00503403 Jy ! Total flux subtracted in 200 components = -0.00503403 Jy ! Clean residual min=-0.009812 max=0.009118 Jy/beam ! Clean residual mean=0.000093 rms=0.002447 Jy/beam ! Combined flux in latest and established models = 1.65792 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 130 components and 1.65792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085441Jy sigma=1.081697 ! Fit after self-cal, rms=0.085433Jy sigma=1.081398 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7368 mas, bmaj=2.179 mas, bpa=-25.76 degrees ! Estimated noise=1.95299 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.03203 Jy ! Component: 100 - total flux cleaned = 1.24892 Jy ! Component: 150 - total flux cleaned = 1.36443 Jy ! Component: 200 - total flux cleaned = 1.43182 Jy ! Total flux subtracted in 200 components = 1.43182 Jy ! Clean residual min=-0.024032 max=0.033926 Jy/beam ! Clean residual mean=-0.000578 rms=0.007817 Jy/beam ! Combined flux in latest and established models = 1.43182 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 1.43182 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9214 mas, bmaj=2.282 mas, bpa=-24.57 degrees ! Estimated noise=1.37845 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0600502 Jy ! Component: 100 - total flux cleaned = 0.101635 Jy ! Component: 150 - total flux cleaned = 0.133068 Jy ! Component: 200 - total flux cleaned = 0.157249 Jy ! Total flux subtracted in 200 components = 0.157249 Jy ! Clean residual min=-0.016847 max=0.018246 Jy/beam ! Clean residual mean=-0.000246 rms=0.004626 Jy/beam ! Combined flux in latest and established models = 1.58907 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 49 components and 1.58907 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.229 mas, bmaj=2.748 mas, bpa=-16.86 degrees ! Estimated noise=1.74188 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0313353 Jy ! Component: 100 - total flux cleaned = 0.0459763 Jy ! Component: 150 - total flux cleaned = 0.0515013 Jy ! Component: 200 - total flux cleaned = 0.0550522 Jy ! Total flux subtracted in 200 components = 0.0550522 Jy ! Clean residual min=-0.010833 max=0.012626 Jy/beam ! Clean residual mean=-0.000037 rms=0.003411 Jy/beam ! Combined flux in latest and established models = 1.64413 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 77 components and 1.64413 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9214 mas, bmaj=2.282 mas, bpa=-24.57 degrees ! Estimated noise=1.37845 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00626952 Jy ! Component: 100 - total flux cleaned = 0.00585469 Jy ! Component: 150 - total flux cleaned = 0.00512119 Jy ! Component: 200 - total flux cleaned = 0.00543254 Jy ! Total flux subtracted in 200 components = 0.00543254 Jy ! Clean residual min=-0.012410 max=0.011154 Jy/beam ! Clean residual mean=0.000018 rms=0.002871 Jy/beam ! Combined flux in latest and established models = 1.64956 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 101 components and 1.64956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089108Jy sigma=1.138624 ! Fit after self-cal, rms=0.088966Jy sigma=1.135065 wmodel J0336+3218_X_2006_02_16_yyk\_map.mod ! Writing 101 model components to file: J0336+3218_X_2006_02_16_yyk_map.mod wobs J0336+3218_X_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J0336+3218_X_2006_02_16_yyk_uvs.fits wwins J0336+3218_X_2006_02_16_yyk\_map.win ! wwins: Wrote 3 windows to J0336+3218_X_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000902032 Jy ! Component: 100 - total flux cleaned = -0.000347885 Jy ! Component: 150 - total flux cleaned = -0.000172928 Jy ! Component: 200 - total flux cleaned = 0.000940812 Jy ! Component: 250 - total flux cleaned = 0.00230121 Jy ! Component: 300 - total flux cleaned = 0.00360128 Jy ! Component: 350 - total flux cleaned = 0.00484685 Jy ! Component: 400 - total flux cleaned = 0.00577639 Jy ! Component: 450 - total flux cleaned = 0.00590299 Jy ! Component: 500 - total flux cleaned = 0.00590522 Jy ! Component: 550 - total flux cleaned = 0.00590726 Jy ! Component: 600 - total flux cleaned = 0.00579244 Jy ! Component: 650 - total flux cleaned = 0.00579538 Jy ! Component: 700 - total flux cleaned = 0.00590687 Jy ! Component: 750 - total flux cleaned = 0.0060133 Jy ! Component: 800 - total flux cleaned = 0.00611322 Jy ! Component: 850 - total flux cleaned = 0.00611007 Jy ! Component: 900 - total flux cleaned = 0.0060143 Jy ! Component: 950 - total flux cleaned = 0.00592156 Jy ! Component: 1000 - total flux cleaned = 0.00646946 Jy ! Component: 1050 - total flux cleaned = 0.00655835 Jy ! Component: 1100 - total flux cleaned = 0.00673345 Jy ! Component: 1150 - total flux cleaned = 0.00698707 Jy ! Component: 1200 - total flux cleaned = 0.00690387 Jy ! Component: 1250 - total flux cleaned = 0.00682453 Jy ! Component: 1300 - total flux cleaned = 0.00690521 Jy ! Component: 1350 - total flux cleaned = 0.00713819 Jy ! Component: 1400 - total flux cleaned = 0.00706269 Jy ! Component: 1450 - total flux cleaned = 0.00735787 Jy ! Component: 1500 - total flux cleaned = 0.00742941 Jy ! Component: 1550 - total flux cleaned = 0.00756905 Jy ! Component: 1600 - total flux cleaned = 0.0079784 Jy ! Component: 1650 - total flux cleaned = 0.00804436 Jy ! Component: 1700 - total flux cleaned = 0.00824192 Jy ! Component: 1750 - total flux cleaned = 0.00862804 Jy ! Component: 1800 - total flux cleaned = 0.00869125 Jy ! Component: 1850 - total flux cleaned = 0.00912537 Jy ! Component: 1900 - total flux cleaned = 0.00942852 Jy ! Component: 1950 - total flux cleaned = 0.00960636 Jy ! Component: 2000 - total flux cleaned = 0.00972302 Jy ! Total flux subtracted in 2048 components = 0.00995224 Jy ! Clean residual min=-0.002932 max=0.003226 Jy/beam ! Clean residual mean=-0.000014 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 1.65951 Jy keep ! Adding 124 model components to the UV plane model. ! The established model now contains 225 components and 1.65951 Jy ![Exited script file: muppet] wmap "J0336+3218_X_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9214 x 2.282 at -24.57 degrees (North through East) ! Clean map min=-0.0080546 max=1.2153 Jy/beam ! Writing clean map to FITS file: J0336+3218_X_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.21533 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00108243 device "J0336+3218_X_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J0336+3218_X_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.267193 0.267193 0.534386 1.06877 2.13754 4.27508 8.55017 17.1003 34.2007 68.4013 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.215 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9214 x 2.282 at -24.57 degrees (North through East) ! Clean map min=-0.0080546 max=1.2153 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0336+3218_X_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J0336+3218_X_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0336+3218_X_2006_02_16_yyk_uvs.log closed on Wed Jul 5 11:15:34 2006