! Started logfile: J0733+5022_X_2006_02_14_yyk_uvs.log on Wed Jul 5 11:40:36 2006 obs J0733+5022_X_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J0733+5022_X_2006_02_14_yyk_uva.fits ! AN table 1: 222 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.84975 visibilities/baseline/integration-bin. ! Found source: J0733+5022 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40997e+09 8e+06 1 8e+06 ! 02 2 8.47997e+09 8e+06 1 8e+06 ! 03 3 8.79497e+09 8e+06 1 8e+06 ! 04 4 8.89997e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2301 lines of history. ! ! Reading 33956 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0733+5022_X_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.550657 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7265 mas, bmaj=2.402 mas, bpa=19.59 degrees ! Estimated noise=1.67947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.461481 Jy ! Component: 100 - total flux cleaned = 0.555655 Jy ! Total flux subtracted in 100 components = 0.555655 Jy ! Clean residual min=-0.015568 max=0.027122 Jy/beam ! Clean residual mean=-0.000006 rms=0.005153 Jy/beam ! Combined flux in latest and established models = 0.555655 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.555655 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.086002Jy sigma=1.665619 ! Fit after self-cal, rms=0.085618Jy sigma=1.659423 ! Inverting map and beam ! Estimated beam: bmin=0.7265 mas, bmaj=2.402 mas, bpa=19.59 degrees ! Estimated noise=1.67947 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8664 mas, bmaj=2.557 mas, bpa=18.2 degrees ! Estimated noise=1.32944 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434445 Jy ! Component: 100 - total flux cleaned = 0.063074 Jy ! Component: 150 - total flux cleaned = 0.073322 Jy ! Component: 200 - total flux cleaned = 0.0790055 Jy ! Total flux subtracted in 200 components = 0.0790055 Jy ! Clean residual min=-0.011485 max=0.011906 Jy/beam ! Clean residual mean=0.000030 rms=0.003149 Jy/beam ! Combined flux in latest and established models = 0.63466 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 38 components and 0.63466 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068909Jy sigma=1.309849 ! Fit after self-cal, rms=0.068781Jy sigma=1.308112 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8664 x 2.557 at 18.2 degrees (North through East) ! Clean map min=-0.011089 max=0.54063 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.995581 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.08 KP 0.99 ! LA 1.00 MK 1.02 NL 1.01 OV 0.99 ! PT 0.98 SC 1.02 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.01252 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.09 KP 0.91 ! LA 0.96 MK 0.96 NL 1.01 OV 0.97 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.999796 ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.01 HN 0.96 KP 0.85 ! LA 1.01 MK 1.04 NL 0.97 OV 1.01 ! PT 1.05 SC 1.00 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 0.984993 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.05 HN 0.98 KP 0.90 ! LA 0.96 MK 1.04 NL 0.99 OV 1.05 ! PT 1.12 SC 1.03 ! ! ! Fit before self-cal, rms=0.068781Jy sigma=1.308112 ! Fit after self-cal, rms=0.057396Jy sigma=1.076023 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057396Jy sigma=1.076023 ! Fit after self-cal, rms=0.057393Jy sigma=1.075975 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8769 mas, bmaj=2.573 mas, bpa=18.25 degrees ! Estimated noise=1.32813 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-2.2, -3.6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00992942 Jy ! Component: 100 - total flux cleaned = 0.0112679 Jy ! Component: 150 - total flux cleaned = 0.0115669 Jy ! Component: 200 - total flux cleaned = 0.0116766 Jy ! Total flux subtracted in 200 components = 0.0116766 Jy ! Clean residual min=-0.004656 max=0.004788 Jy/beam ! Clean residual mean=-0.000012 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 0.646337 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 60 components and 0.646337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055887Jy sigma=1.042644 ! Fit after self-cal, rms=0.055793Jy sigma=1.040989 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055793Jy sigma=1.040989 ! Fit after self-cal, rms=0.052814Jy sigma=0.976124 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00181615 Jy ! Component: 100 - total flux cleaned = 0.00192404 Jy ! Component: 150 - total flux cleaned = 0.0018344 Jy ! Component: 200 - total flux cleaned = 0.00175094 Jy ! Total flux subtracted in 200 components = 0.00175094 Jy ! Clean residual min=-0.004666 max=0.004339 Jy/beam ! Clean residual mean=-0.000009 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.648088 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.648088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052522Jy sigma=0.970561 ! Fit after self-cal, rms=0.052367Jy sigma=0.966573 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8769 x 2.573 at 18.25 degrees (North through East) ! Clean map min=-0.0041978 max=0.54284 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052367Jy sigma=0.966573 ! Fit after self-cal, rms=0.051397Jy sigma=0.940885 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051397Jy sigma=0.940885 ! Fit after self-cal, rms=0.051396Jy sigma=0.940617 ! Inverting map and beam ! Estimated beam: bmin=0.8776 mas, bmaj=2.575 mas, bpa=18.23 degrees ! Estimated noise=1.32578 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000288447 Jy ! Component: 100 - total flux cleaned = 0.000136625 Jy ! Component: 150 - total flux cleaned = -7.27647e-05 Jy ! Component: 200 - total flux cleaned = -0.000198778 Jy ! Total flux subtracted in 200 components = -0.000198778 Jy ! Clean residual min=-0.004191 max=0.003887 Jy/beam ! Clean residual mean=-0.000007 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.647889 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.647889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051231Jy sigma=0.937267 ! Fit after self-cal, rms=0.051225Jy sigma=0.937142 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051225Jy sigma=0.937142 ! Fit after self-cal, rms=0.050497Jy sigma=0.921556 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050497Jy sigma=0.921556 ! Fit after self-cal, rms=0.050498Jy sigma=0.921553 ! Inverting map and beam ! Estimated beam: bmin=0.8782 mas, bmaj=2.575 mas, bpa=18.2 degrees ! Estimated noise=1.32439 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -4.74779e-05 Jy ! Component: 100 - total flux cleaned = -0.000106049 Jy ! Component: 150 - total flux cleaned = -0.000211204 Jy ! Component: 200 - total flux cleaned = -0.000307102 Jy ! Total flux subtracted in 200 components = -0.000307102 Jy ! Clean residual min=-0.004135 max=0.003690 Jy/beam ! Clean residual mean=-0.000006 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.647582 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 95 components and 0.647582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050403Jy sigma=0.919744 ! Fit after self-cal, rms=0.050400Jy sigma=0.919712 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=3.098 mas, bpa=10.78 degrees ! Estimated noise=1.72158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000323285 Jy ! Component: 100 - total flux cleaned = -0.00043221 Jy ! Component: 150 - total flux cleaned = -0.000474458 Jy ! Component: 200 - total flux cleaned = -0.000513127 Jy ! Total flux subtracted in 200 components = -0.000513127 Jy ! Clean residual min=-0.003203 max=0.003319 Jy/beam ! Clean residual mean=-0.000009 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.647069 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 111 components and 0.647069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050425Jy sigma=0.919764 ! Fit after self-cal, rms=0.050421Jy sigma=0.919480 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7321 mas, bmaj=2.405 mas, bpa=19.55 degrees ! Estimated noise=1.68016 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.46149 Jy ! Component: 100 - total flux cleaned = 0.554485 Jy ! Component: 150 - total flux cleaned = 0.59082 Jy ! Component: 200 - total flux cleaned = 0.611565 Jy ! Total flux subtracted in 200 components = 0.611565 Jy ! Clean residual min=-0.008072 max=0.008806 Jy/beam ! Clean residual mean=-0.000015 rms=0.002091 Jy/beam ! Combined flux in latest and established models = 0.611565 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.611565 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8782 mas, bmaj=2.575 mas, bpa=18.2 degrees ! Estimated noise=1.32439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133992 Jy ! Component: 100 - total flux cleaned = 0.0213935 Jy ! Component: 150 - total flux cleaned = 0.0264772 Jy ! Component: 200 - total flux cleaned = 0.0288048 Jy ! Total flux subtracted in 200 components = 0.0288048 Jy ! Clean residual min=-0.004257 max=0.004195 Jy/beam ! Clean residual mean=-0.000019 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 0.64037 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 41 components and 0.640369 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.101 mas, bmaj=3.098 mas, bpa=10.78 degrees ! Estimated noise=1.72158 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393183 Jy ! Component: 100 - total flux cleaned = 0.00584536 Jy ! Component: 150 - total flux cleaned = 0.00630639 Jy ! Component: 200 - total flux cleaned = 0.00647722 Jy ! Total flux subtracted in 200 components = 0.00647722 Jy ! Clean residual min=-0.003182 max=0.003379 Jy/beam ! Clean residual mean=-0.000011 rms=0.001062 Jy/beam ! Combined flux in latest and established models = 0.646847 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 73 components and 0.646847 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8782 mas, bmaj=2.575 mas, bpa=18.2 degrees ! Estimated noise=1.32439 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00022133 Jy ! Component: 100 - total flux cleaned = -0.00012404 Jy ! Component: 150 - total flux cleaned = 4.9632e-05 Jy ! Component: 200 - total flux cleaned = 0.000133317 Jy ! Total flux subtracted in 200 components = 0.000133317 Jy ! Clean residual min=-0.004046 max=0.003754 Jy/beam ! Clean residual mean=-0.000007 rms=0.000978 Jy/beam ! Combined flux in latest and established models = 0.64698 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.64698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.050670Jy sigma=0.923778 ! Fit after self-cal, rms=0.050667Jy sigma=0.923704 wmodel J0733+5022_X_2006_02_14_yyk\_map.mod ! Writing 88 model components to file: J0733+5022_X_2006_02_14_yyk_map.mod wobs J0733+5022_X_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J0733+5022_X_2006_02_14_yyk_uvs.fits wwins J0733+5022_X_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J0733+5022_X_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314595 Jy ! Component: 100 - total flux cleaned = 0.000501667 Jy ! Component: 150 - total flux cleaned = 0.000976067 Jy ! Component: 200 - total flux cleaned = 0.00136656 Jy ! Component: 250 - total flux cleaned = 0.0015262 Jy ! Component: 300 - total flux cleaned = 0.00157702 Jy ! Component: 350 - total flux cleaned = 0.00157768 Jy ! Component: 400 - total flux cleaned = 0.00167169 Jy ! Component: 450 - total flux cleaned = 0.00167128 Jy ! Component: 500 - total flux cleaned = 0.00171638 Jy ! Component: 550 - total flux cleaned = 0.00189008 Jy ! Component: 600 - total flux cleaned = 0.00188955 Jy ! Component: 650 - total flux cleaned = 0.00176621 Jy ! Component: 700 - total flux cleaned = 0.00176712 Jy ! Component: 750 - total flux cleaned = 0.00172816 Jy ! Component: 800 - total flux cleaned = 0.00161359 Jy ! Component: 850 - total flux cleaned = 0.00153853 Jy ! Component: 900 - total flux cleaned = 0.00135462 Jy ! Component: 950 - total flux cleaned = 0.00131828 Jy ! Component: 1000 - total flux cleaned = 0.00110644 Jy ! Component: 1050 - total flux cleaned = 0.00100331 Jy ! Component: 1100 - total flux cleaned = 0.000833505 Jy ! Component: 1150 - total flux cleaned = 0.000733433 Jy ! Component: 1200 - total flux cleaned = 0.000537453 Jy ! Component: 1250 - total flux cleaned = 0.000505463 Jy ! Component: 1300 - total flux cleaned = 0.000410557 Jy ! Component: 1350 - total flux cleaned = 0.000379898 Jy ! Component: 1400 - total flux cleaned = 0.000348953 Jy ! Component: 1450 - total flux cleaned = 0.000348672 Jy ! Component: 1500 - total flux cleaned = 0.000348746 Jy ! Component: 1550 - total flux cleaned = 0.000319414 Jy ! Component: 1600 - total flux cleaned = 0.000376941 Jy ! Component: 1650 - total flux cleaned = 0.000349152 Jy ! Component: 1700 - total flux cleaned = 0.000377495 Jy ! Component: 1750 - total flux cleaned = 0.00037716 Jy ! Component: 1800 - total flux cleaned = 0.000214032 Jy ! Component: 1850 - total flux cleaned = 0.000268385 Jy ! Component: 1900 - total flux cleaned = 0.000268436 Jy ! Component: 1950 - total flux cleaned = 0.00021693 Jy ! Component: 2000 - total flux cleaned = 0.000191257 Jy ! Total flux subtracted in 2048 components = 0.00019112 Jy ! Clean residual min=-0.001302 max=0.001599 Jy/beam ! Clean residual mean=-0.000002 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 0.647171 Jy keep ! Adding 130 model components to the UV plane model. ! The established model now contains 218 components and 0.647171 Jy ![Exited script file: muppet] wmap "J0733+5022_X_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8782 x 2.575 at 18.2 degrees (North through East) ! Clean map min=-0.0035855 max=0.54176 Jy/beam ! Writing clean map to FITS file: J0733+5022_X_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.54176 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000474645 device "J0733+5022_X_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J0733+5022_X_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.262835 0.262835 0.52567 1.05134 2.10268 4.20536 8.41073 16.8215 33.6429 67.2858 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.541 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8782 x 2.575 at 18.2 degrees (North through East) ! Clean map min=-0.0035855 max=0.54176 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0733+5022_X_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J0733+5022_X_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0733+5022_X_2006_02_14_yyk_uvs.log closed on Wed Jul 5 11:41:00 2006