Command |
Function |
Call sequence |
Dichroism Macros |
dsetE |
Sets diamond phase retarder theta for a given energy |
dsetE energy(keV) |
dsetEpr1, dsetE pr2 |
Sets PR1 theta for a given energy |
dsetE energy(keV) |
dmoveE |
Moves mono energy and tracks diamond PR |
dsetE energy(keV) |
adichro |
One motor dichroism scan |
dsetE energy(keV) |
a2dichro,a3dichro |
Multiple motor dichroism scan |
dsetE energy(keV) |
dichromesh |
Nested motor dichro mesh scan |
dsetE energy(keV) |
hdichro,kdichro,ldic |
H,K,L dichroism scans |
dsetE energy(keV) |
Edichro |
Set limits for motor |
lm mot high low |
dichro_setup |
Set motor position to given value |
set mot val |
Edichro2 |
Energy dichro scan with different energy intervals |
Edichro2 E1 E2 E3 E4 n1 n2 n3 time |
qxdichro |
Energy dichro scan with multiple energy intervals |
qxdichro2 EdgeE time |
kepdichro |
kepko current dichro scan |
kepdichro start finish steps time [hyst] |
kepdichro2 |
kepko current dichro scan with three intervals |
kepdichro2 I1 I2 I3 I4 n1 n2 n3 time [hyst] |
kepdichro_rem |
kepko dichro scan in remanence |
kepdichro_rem start finish steps time |
Edichropeak |
Edichro fixQ scan peaking up motor @ each E |
Edichropeak Es Ef stps t pmot pdel pstps |
Edichrorock |
Edichro fixQ scan rocking motor @ each E |
Edichrorock Es Ef stps t rmot rdel rstps |
cplot_dichro_flip |
Prints a plot of signal and flipping ratio |
cplot_dichro_flip |
cplot_dichro_diff |
Prints a plot of signal and difference. |
cplot_dichro_diff |
lock (scan) |
Starts a lockin scan |
lock ascan strt finish steps time |
dlock (scan) |
Starts a digital lockin scan |
dlock ascan strt finish steps time |
sr400_init |
Initializes SRS400 for scans |
sr400_init preset periods gatew gated |
cplot_lock |
Prints a plot of the DC and lockin signals |
cplot_lock |
cplot_dlock |
Prints a plot of the sum, flip, and difference signals. |
cplot_dlock |
pzt_osc_on(off) |
Turns on (off) PZT oscilations |
pzt_osc_on |
pr_track_on(off) |
Phase retarder track in E (on or off) |
pr_track_on |
Kepko Macros |
kepkoI |
Move a motor to a position [with updating] |
mv mot pos |
kepkoV |
Move a motor relative amount [with updating] |
mv mot del |
kepko_on[off] |
tweak a motor [2 motors]. |
tw mot dist |
kepscan |
Show all motor positions |
wa |
kepscan2 |
Show position of specific motor |
wm mot |
AMI Magnet Macros |
amifield |
Singe motor absolute scan. |
ascan mot start finish steps time |
a2scan, a3scan, a4.. |
Multimotor absolute scans. |
a2scan m1 s1 f1 m2 s2 f2 steps time |
EXAFS Macros |
qxscan |
Energy scan using fixed q steps above an edge |
ascan mot start finish steps time |
qxscan_setup |
Used to define qxscan parameters |
a2scan m1 s1 f1 m2 s2 f2 steps time |
ascan |
Singe motor absolute scan. |
ascan mot start finish steps time |