# opening closest to plasma
  enter range for this recess, closest x value first (a,b)
 0.006 0.055
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  2.72
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  -0.0925
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 20 52

 # SEPTUM box 1
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.1075
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  0.1075
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.1075
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 2
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.3025
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  0.3025
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.3025
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 3
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.4975
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  0.4975
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.4975
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 4
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.6925
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  0.6925
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.6925
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 5
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.8875
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  0.8875
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  0.8875
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 6
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.0825
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  1.0825
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.0825
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 7
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.2775
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  1.2775
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.2775
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 8
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.4725
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  1.4725
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.4725
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 9
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.6675
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  1.6675
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.6675
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 10
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.8625
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  1.8625
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  1.8625
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 11
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  2.0575
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  2.0575
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  2.0575
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # SEPTUM box 12
  enter range for this recess, closest x value first (a,b)
 0.055 0.0810
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.94  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  2.2525
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 12 8

 # top recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 0.166  2.2525
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8


 # bottom recess to model curvature away from backplane
  enter range for this recess, closest x value first (a,b)
 0.0810 0.140
  enter height (poloidal) and width (toroidal) of cavity, (ay,bz)
 0.304  0.175
  enter periodic recess coordinates for lower left corner (qcy,qcz)
 -0.47  2.2525
  enter boundary condition type for poloidal direction (yboundary)
  enter either waveguide or periodic
 waveguid
  enter boundary condition type for toroidal direction (zboundary)
  enter either waveguide or periodic
 waveguid
  enter number of modes in y' and z' directions (mmax,nmax)
 6 8