Sample 1: Check ICAN/JAVA
$  Booleans:
SQARRA  ; T
SQDAMP  ; F
COMSAT  ; T
CSANB   ; F
BIDE    ; F
RINDV   ; F
NONUDF  ; T
DEFECT  ; F
MICRO   ; F
UNITS   ; F
$  1 Ply Laminate:
PLY     ; 1; 1; 70.0; 0.0; 0.01; false; 
$  1 Composites Material System used in Laminate:
MATCRD  ; 1; PARF; IMHS; IMLS; 0.45; 0.05; 0.02; ; ; ; 0.0; 0.0; 0.0; 0.0; 
$  0 Substructure Slices:
$  0 Slices are subsliced:
$  0 Defects:
$  1 Applied loading conditions used in Laminate:
PMEMB   ; 1000.0; 100.0; 50.0; 0.0; 
PBEND   ; 50.0; 40.0; 30.0; 
PTRAN   ; 50.0; 20.0; 
PSHEAR  ; 30.0; 20.0; 
PCENT   ; 100.0; 6.0; 
$  Cyclic Loads:
CNXX    ; 200.0; 100.0; 100.0; 0.1;
CNYY    ; -50.0; -100.0; 10.0; 0.1;
CMXX    ; 10.0; 5.0; 10.0; 0.01;
CMYY    ; 4.0; 2.0; 1000.0; 0.15;
CMXY    ; 2.0; 1.0; 100.0; 0.1;
$  1 Thermal Static Loads:
LOADT   ; Parabolic; 5.0E-4; 70.0; 90.0; 100.0; 
$  1 Hygral Static Loads:
LOADH   ; Linear; 1.0; 3.0; 
$  1 Electrical Static Loads:
LOADE   ; User-defined; 10.0; 
$  1 Thermal Cyclic Loads (A):
CLOADT   ; Hyperbolic; 5.0E-4; 70.0; 70.06; 70.1; 
$  1 Thermal Cyclic Loads (B):
CLOADT   ; Hyperbolic; 5.0E-4; 70.0; 90.0; 100.0; 
CyclesT  ; 20000; 20000
$  1 Hygral Cyclic Loads (A):
CLOADH   ; Constant; 3.0; 
$  1 Hygral Cyclic Loads (B):
CLOADH   ; Constant; 1.0; 
CyclesH  ; 20000; 20000
$  1 Electrical Cyclic Loads (A):
CLOADE   ; Constant; 10.0; 
$  1 Electrical Cyclic Loads (B):
CLOADE   ; Constant; 100.0; 
CyclesE  ; 20000; 20000
$  1 Damping data:
DAMPING ; 3; 1; 0.1; 2000.0; 100.0; 
$  0 Composites Reaction Data used in Laminate:
$  Impact data:
IMPACT ; 0.0010; 0.1; 0.1; 5000.0; 
$  Outputs:
PRINT   ; IDECHO  (Input Data Echo)
PRINT   ; INPTSUM (Input Data Summary)
PRINT   ; FIBMATP (Constituent Ply Props)
PRINT   ; STRSTRN (Stress/Strain Law)
PRINT   ; PROPCOM (Composite Properties)
PRINT   ; CONSTI (Constitutive Relation)
PRINT   ; REDSTIF (Reduced D&A Stiffness)
PRINT   ; FEMDATA (F.E.A. Data)
PRINT   ; DISPFOR (Force/Disp Relations)
PRINT   ; PLYRESP (Ply Response Prop)
PRINT   ; NUMISM (Poisson's Ratio Mismatch)
PRINT   ; FREESTR (Free Edge Stresses)
PRINT   ; MICRO (Microstresses Infl. Coef.)
PRINT   ; STRCON (Stress Conc. Factors)
PRINT   ; DELAMS (Delamination Around Hole Summary)
PRINT   ; STRSINF (Stress/Strain Infl. Coef.)
PRINT   ; FAILDET (Failure Anal. Details)
PRINT   ; FAILSUM (Failure Anal. Summary)
PRINT   ; DURAAN (Durability Results)
PRINT   ; DURADET (Durability Details)
PRINT   ; DURASUM (Durability Summary)
PRINT   ; DURADEF (Durability with Defect)
PRINT   ; DURDEFS (Durability with Defect Summary)
PRINT   ; IMPACT (Projectile Hitting Laminate)
PRINT   ; IMPSUM (Projectile Impact Summary)
PRINT   ; DAMPING (Fiber Only)