$    Title Card (group 1)
Sample 1: Check ICAN/JAVA
$    Booleans (group 2)
 COMSAT  T
  CSANB  F
   BIDE  F
  RINDV  F
 NONUDF  T
 DEFECT  F
  MICRO  F
$    Laminate Configuration (group 3)
$------|-------|-------|-------|-------|-------|
    PLY       1       1  70.0     0.0    0.010
    PLY       2       2  70.0    90.0    0.005
    PLY       3       2  70.0    90.0    0.005
    PLY       4       1  70.0     0.0    0.010
$    Material Data
$------|-------|-------|-------|-------|-------|-------|-------|-------|
 MATCRD        1AS--IMLS  .55    .02    AS--IMLS  .57    0.03    0.00
 MATCRD        2SGLAHMHS  .55    .01    AS--IMHS  .57    0.01    0.40
$    Loads (group 5)
$------|-------|-------|-------|-------|-------|
  PMEMB  1000.0   0.0      0.0     0.0             NXX,NYY,NXY,THCS
  PBEND    0.0    0.0      0.0                     MXX,MYY,MXY
  PTRAN    0.0    0.0      0.0                     NZZ,PU,PL
  PSHEAR   0.0    0.0                              NXZ,NYZ
  PCENT    0.0    0.0                              RPM,RADIUS

$    Cyclic or fatigue loads (group 6)
$------|-------|-------|-------|-------|-------|
   CNXX  200.    100.    100.    0.1
   CNYY  -50.   -100.     10.    0.1
   CNXY  20.     10.     100.    0.2
   CMXX  10.      5.      10.    0.01
   CMYY   4.      2.    1000.    0.15
   CMXY   2.      1.     100.    0.1
LOADT; Linear; 70.0; 70.0;
$    Output Selection (group 14)
$ PRINT    NONE  No output is requested                        (Option 0)
  PRINT     ALL
$ PRINT     ALL  Output request for complete results           (Option 1)
$ PRINT  IDECHO  Output request for input data echo            (Option 2)
$ PRINT    LOGO  Output request for ICAN/JAVA diagram          (Option 3)
$ PRINT INPTSUM  Output request for summary of input data      (Option 4)
$ PRINT FIBMATP  Output request for constituent/ply properties (Option 5)
$ PRINT STRSTRN  Output request for stress/strain relations    (Option 6)
$ PRINT PROPCOM  Output request for composite properties       (Option 7)
$ PRINT  CONSTI  Output request for constitutive relations     (Option 8)
$ PRINT REDSTIF  Output request for reduced D&A stiffness      (Option 9)
$ PRINT FEMDATA  Output request for F.E.A. data                (Option 10)
$ PRINT DISPFOR  Output request for force/disp relations       (Option 11)
$ PRINT PLYRESP  Output request for ply responses/properties   (Option 12)
$ PRINT  NUMISM  Output request for Poisson's ratio mismatch   (Option 13)
$ PRINT FREESTR  Output request for free-edge stresses         (Option 14)
$ PRINT   MICRO  Output request for microstress infl. coef.    (Option 15)
$ PRINT  STRCON  Output request for Stress concentration       (Option 16)
$ PRINT  DELAMI  Output request for delamination around hole   (Option 17)
$ PRINT  DELAMS  Output request for delamination  summary      (Option 18)
$ PRINT STRSINF  Output request for stress/strain infl. coef.  (Option 19)
$ PRINT FAILDET  Output request for failure anal. details      (Option 20)
$ PRINT FAILSUM  Output request for failure anal. summary      (Option 21)
$ PRINT  DURAAN  Output request for durability results         (Option 22)
$ PRINT DURADET  Output request for durability details         (Option 23)
$ PRINT DURASUM  Output request for durability summary         (Option 24)
$ PRINT DURADEF  Output request for durability w/defect        (Option 25)
$ PRINT DURDEFS  Output request for durability /defect summary (Option 26)
$ PRINT  IMPACT  Output request for durability /defect summary (Option 27)
$ PRINT  IMPSUM  Output request for durability /defect summary (Option 28)
$ PRINT DAMPING  Output request for durability /defect summary (Option 29)