Chemical Datasheet
LINDANE |
Chemical Identifiers
)
UN/NA Number - The United Nations-North America number (also called UN number or DOT number). 4-digit number identifying an individual chemical or group of chemicals with similar characteristics. Required on shipping papers; often shown on placards or labels. This numbering system was developed by the U.S. Department of Transportation, and then became the UN standard system for classifying hazardous materials.
CAS Number - Chemical Abstracts Service registry number. Unique identification number assigned to this chemical by the American Chemical Society.
CHRIS Code - 3-letter code used by the U.S. Coast Guard to identify individual chemicals included in its CHRIS (Chemical Hazards Response Information System) manual.
DOT Hazard Label - U.S. Department of Transportation hazard warning label for the chemical (such as flammable liquid or corrosive). This label must be displayed on shipped packages, railroad tank cars, and tank trucks according to specifications described in 49 CFR 172.
NFPA 704 - Text description of the diamond-shaped placard, which contains codes indicating the level of the chemical's health, flammability, and reactivity hazards, along with special hazards such as water- and air-reactivity. (The NFPA 704 diamond is also shown at the top of the datasheet.) See a guide to the NFPA diamond.
General Description - Brief description of the chemical's general appearance, behavior, and hazardousness.
List of data sources.
CAS Number - Chemical Abstracts Service registry number. Unique identification number assigned to this chemical by the American Chemical Society.
CHRIS Code - 3-letter code used by the U.S. Coast Guard to identify individual chemicals included in its CHRIS (Chemical Hazards Response Information System) manual.
DOT Hazard Label - U.S. Department of Transportation hazard warning label for the chemical (such as flammable liquid or corrosive). This label must be displayed on shipped packages, railroad tank cars, and tank trucks according to specifications described in 49 CFR 172.
NFPA 704 - Text description of the diamond-shaped placard, which contains codes indicating the level of the chemical's health, flammability, and reactivity hazards, along with special hazards such as water- and air-reactivity. (The NFPA 704 diamond is also shown at the top of the datasheet.) See a guide to the NFPA diamond.
General Description - Brief description of the chemical's general appearance, behavior, and hazardousness.
List of data sources.
| UN/NA Number | CAS Number | CHRIS Code | DOT Hazard Label |
|---|---|---|---|
|
|
NFPA 704:
data unavailable
General Description
Colorless solid with a musty odor; pure material is odorless. Used as a pesticide and scabicide. (EPA, 1998)
Hazards
)
Reactivity Alerts - Special alerts if the chemical is especially reactive
(see list of reactivity alerts).
Air & Water Reactions - Special alerts if the chemical reacts with air, water, or moisture.
Fire Hazard - Description of the chemical's fire hazards (such as flammability, explosion risk, or byproducts that may evolve if the chemical is burned).
Health Hazard - Description of the chemical's health hazards (such as toxicity, flammability, or corrosivity).
Reactivity Profile - Description of the chemical's potential reactivity with other chemicals, air, and water. Also includes any other intrinsic reactive hazards (such as polymerizable or peroxidizable).
Reactive Groups - List of reactive groups that the chemical is assigned to, based on its known chemistry. Reactive groups are categories of chemicals that react in similar ways because their chemical structures are similar. Reactive groups are used to predict reactivity when you add a chemical to MyChemicals. Read more about reactive groups.
List of data sources.
Air & Water Reactions - Special alerts if the chemical reacts with air, water, or moisture.
Fire Hazard - Description of the chemical's fire hazards (such as flammability, explosion risk, or byproducts that may evolve if the chemical is burned).
Health Hazard - Description of the chemical's health hazards (such as toxicity, flammability, or corrosivity).
Reactivity Profile - Description of the chemical's potential reactivity with other chemicals, air, and water. Also includes any other intrinsic reactive hazards (such as polymerizable or peroxidizable).
Reactive Groups - List of reactive groups that the chemical is assigned to, based on its known chemistry. Reactive groups are categories of chemicals that react in similar ways because their chemical structures are similar. Reactive groups are used to predict reactivity when you add a chemical to MyChemicals. Read more about reactive groups.
List of data sources.
Reactivity Alerts
none
Air & Water Reactions
Insoluble in water.
Fire Hazard
When heated to decomposition, this compound emits toxic fumes of chlorine, hydrochloric acid, and phosgene. (EPA, 1998)
Health Hazard
Lindane is a stimulant of the nervous system, causing violent convulsions that are rapid in onset and generally followed by death or recovery within 24 hours. The probable human oral lethal dose is 50-500 mg/kg, or between 1 teaspoon and 1 ounce for a 150-lb (70 kg) person. (EPA, 1998)
Reactivity Profile
LINDANE is incompatible with strong bases. It is incompatible with powdered metals such as iron, zinc and aluminum. It is also incompatible with oxidizing agents. It can undergo oxidation when in contact with ozone. When exposed to alkalis, this chemical undergoes dehydrochlorination. (NTP, 1992)
Belongs to the Following Reactive Group(s)
Response Recommendations
)
Firefighting - Response recommendations if the chemical is on fire (or near a fire).
Non-Fire Response - Response recommendations if the chemical isn't on fire (or near a fire).
Protective Clothing - Recommendations for protective gear and, in some cases, a table of breakthrough times for protective materials.
First Aid - Recommended first aid treatment for people exposed to the chemical.
List of data sources.
Non-Fire Response - Response recommendations if the chemical isn't on fire (or near a fire).
Protective Clothing - Recommendations for protective gear and, in some cases, a table of breakthrough times for protective materials.
First Aid - Recommended first aid treatment for people exposed to the chemical.
List of data sources.
Firefighting
Isolate hazard area and deny entry. Stay upwind and keep out of low areas. Ventilate closed spaces before entering. Wear positive pressure breathing apparatus and special protective clothing. Fight fire from maximum distance, dike fire control water for later disposal.
Use dry chemical, carbon dioxide, water spray, or foam for small fires. Use water spray, fog, or foam for large fires. Move container from fire area if this can be done without risk. Use water to keep fire-exposed containers cool. (EPA, 1998)
Use dry chemical, carbon dioxide, water spray, or foam for small fires. Use water spray, fog, or foam for large fires. Move container from fire area if this can be done without risk. Use water to keep fire-exposed containers cool. (EPA, 1998)
Non-Fire Response
Do not touch spilled material. Sweep or shovel material into a clean, dry container. Carefully collect remainder. (EPA, 1998)
Protective Clothing
Skin: Wear appropriate personal protective clothing to prevent skin contact.
Eyes: No recommendation is made specifying the need for eye protection.
Wash skin: The worker should immediately wash the skin when it becomes contaminated.
Remove: Work clothing that becomes wet or significantly contaminated should be removed and replaced.
Change: Workers whose clothing may have become contaminated should change into uncontaminated clothing before leaving the work premise.
Provide: Facilities for quickly drenching the body should be provided within the immediate work area for emergency use where there is a possibility of exposure. [Note: It is intended that these facilities provide a sufficient quantity or flow of water to quickly remove the substance from any body areas likely to be exposed. The actual determination of what constitutes an adequate quick drench facility depends on the specific circumstances. In certain instances, a deluge shower should be readily available, whereas in others, the availability of water from a sink or hose could be considered adequate.] (NIOSH, 2003)
Eyes: No recommendation is made specifying the need for eye protection.
Wash skin: The worker should immediately wash the skin when it becomes contaminated.
Remove: Work clothing that becomes wet or significantly contaminated should be removed and replaced.
Change: Workers whose clothing may have become contaminated should change into uncontaminated clothing before leaving the work premise.
Provide: Facilities for quickly drenching the body should be provided within the immediate work area for emergency use where there is a possibility of exposure. [Note: It is intended that these facilities provide a sufficient quantity or flow of water to quickly remove the substance from any body areas likely to be exposed. The actual determination of what constitutes an adequate quick drench facility depends on the specific circumstances. In certain instances, a deluge shower should be readily available, whereas in others, the availability of water from a sink or hose could be considered adequate.] (NIOSH, 2003)
_____Dupont Average Standardized Breakthrough Times_____
(for LINDANE, SAT. SOLUTION IN ACETONE)
Tychem® BR
greater than 480 min. (concentration: sat. sol. In Acetone)
Tychem® LV
greater than 480 min. (concentration: sat. sol. In Acetone)
Tychem® Reflector®
greater than 480 min. (concentration: sat. sol. In Acetone)
Tychem® Responder®
greater than 480 min. (concentration: sat. sol. In Acetone)
Tychem® Responder® CSM
greater than 480 min. (concentration: sat. sol. In Acetone)
Tychem® TK
greater than 480 min. (concentration: sat. sol. In Acetone) (DuPont, 2008)
Copyrighted information of E.I. du Pont de Nemours and Company. Tychem® is a registered trademark of E.I. du Pont de Nemours and Company.
First Aid
Signs and Symptoms of Acute Lindane exposure: Signs and symptoms of acute exposure to lindane may be severe and include headache, dizziness, increased sensitivity to stimuli, agitation, nervousness, tremor, seizures, and coma. Convulsive episodes may alternate with periods of severe central nervous system depression. Nausea, vomiting, and diarrhea are common. Hypertension (high blood pressure), tachycardia (rapid heart rate), and cardiac arrhythmias (abnormal heart beat) may be noted. Respiratory depression may lead to respiratory arrest. Contact with the skin, eyes, and mucous membranes may result in redness and irritation. Victims often have an elevated temperature.
Emergency Life-Support Procedures: Acute exposure to lindane may require decontamination and life support for the victims. Emergency personnel should wear protective clothing appropriate to the type and degree of contamination. Air-purifying or supplied-air respiratory equipment should also be worn, as necessary. Rescue vehicles should carry supplies such as plastic sheeting and disposable plastic bags to assist in preventing spread of contamination.
Inhalation Exposure:
1. Move victims to fresh air. Emergency personnel should avoid self-exposure to lindane.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer 100% humidified oxygen or other respiratory support.
3. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
4. Transport to a health care facility.
Dermal/Eye Exposure:
1. Remove victims from exposure. Emergency personnel should avoid self-exposure to lindane.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. .If not labored, administer 100% humidified oxygen or other respiratory support.
3. Remove and isolate contaminated clothing as soon as possible.
4. If eye exposure has occurred, eyes must be flushed with lukewarm water for at least 15 minutes.
5. Wash exposed skin areas three times. Wash initially with soap and water, follow with an alcohol wash, then again with soap and water.
6. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
7. Transport to a health care facility.
Ingestion Exposure:
1. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer 100% humidified oxygen or other respiratory support.
2. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
3. Vomiting may be induced with syrup of Ipecac. If elapsed time since ingestion of lindane is unknown or suspected to be greater than 30 minutes, do not induce vomiting and proceed to Step
4. Ipecac should not be administered to children under 6 months of age. Warning: Ingestion of lindane may result in sudden onset of seizures or loss of consciousness. Syrup of Ipecac should be administered only if victims are alert, have an active gag reflex, and show no signs of impending seizure or coma. If ANY uncertainty exists, proceed to Step
4. The following dosages of Ipecac are recommended: children up to 1 year old, 10 mL (1/3 oz); children 1 to 12 years old, 15 mL (1/2 oz); adults, 30 mL (1 oz). Ambulate (walk) the victims and give large quantities of water. If vomiting has not occurred after 15 minutes, Ipecac may be readministered. Continue to ambulate and give water to the victims. If vomiting has not occurred within 15 minutes after second administration of Ipecac, administer activated charcoal.
4. Activated charcoal may be administered if victims are conscious and alert. Use 15 to 30 g (1/2 to 1 oz) for children, 50 to 100 g (1-3/4 to 3-1/2 oz) for adults, with 125 to 250 mL (1/2 to 1 cup) of water.
5. Promote excretion by administering a saline cathartic or sorbitol to conscious and alert victims. Children require 15 to 30 g (1/2 to 1 oz) of cathartic; 50 to 100 g (1-3/4 to 3-1/2 oz) is recommended for adults.
6. Transport to a health care facility. (EPA, 1998)
Emergency Life-Support Procedures: Acute exposure to lindane may require decontamination and life support for the victims. Emergency personnel should wear protective clothing appropriate to the type and degree of contamination. Air-purifying or supplied-air respiratory equipment should also be worn, as necessary. Rescue vehicles should carry supplies such as plastic sheeting and disposable plastic bags to assist in preventing spread of contamination.
Inhalation Exposure:
1. Move victims to fresh air. Emergency personnel should avoid self-exposure to lindane.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer 100% humidified oxygen or other respiratory support.
3. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
4. Transport to a health care facility.
Dermal/Eye Exposure:
1. Remove victims from exposure. Emergency personnel should avoid self-exposure to lindane.
2. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. .If not labored, administer 100% humidified oxygen or other respiratory support.
3. Remove and isolate contaminated clothing as soon as possible.
4. If eye exposure has occurred, eyes must be flushed with lukewarm water for at least 15 minutes.
5. Wash exposed skin areas three times. Wash initially with soap and water, follow with an alcohol wash, then again with soap and water.
6. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
7. Transport to a health care facility.
Ingestion Exposure:
1. Evaluate vital signs including pulse and respiratory rate, and note any trauma. If no pulse is detected, provide CPR. If not breathing, provide artificial respiration. If breathing is labored, administer 100% humidified oxygen or other respiratory support.
2. Obtain authorization and/or further instructions from the local hospital for administration of an antidote or performance of other invasive procedures.
3. Vomiting may be induced with syrup of Ipecac. If elapsed time since ingestion of lindane is unknown or suspected to be greater than 30 minutes, do not induce vomiting and proceed to Step
4. Ipecac should not be administered to children under 6 months of age. Warning: Ingestion of lindane may result in sudden onset of seizures or loss of consciousness. Syrup of Ipecac should be administered only if victims are alert, have an active gag reflex, and show no signs of impending seizure or coma. If ANY uncertainty exists, proceed to Step
4. The following dosages of Ipecac are recommended: children up to 1 year old, 10 mL (1/3 oz); children 1 to 12 years old, 15 mL (1/2 oz); adults, 30 mL (1 oz). Ambulate (walk) the victims and give large quantities of water. If vomiting has not occurred after 15 minutes, Ipecac may be readministered. Continue to ambulate and give water to the victims. If vomiting has not occurred within 15 minutes after second administration of Ipecac, administer activated charcoal.
4. Activated charcoal may be administered if victims are conscious and alert. Use 15 to 30 g (1/2 to 1 oz) for children, 50 to 100 g (1-3/4 to 3-1/2 oz) for adults, with 125 to 250 mL (1/2 to 1 cup) of water.
5. Promote excretion by administering a saline cathartic or sorbitol to conscious and alert victims. Children require 15 to 30 g (1/2 to 1 oz) of cathartic; 50 to 100 g (1-3/4 to 3-1/2 oz) is recommended for adults.
6. Transport to a health care facility. (EPA, 1998)
Physical Properties
)
This section contains physical properties, flammability limits, and toxic thresholds for this chemical (see
definitions of each property).
More property data is available for common chemicals.
Guide to toxic levels of concern (AEGLs, ERPGs, TEELs, and IDLH).
List of data sources.
Guide to toxic levels of concern (AEGLs, ERPGs, TEELs, and IDLH).
List of data sources.
| Molecular Formula: |
|
Flash Point: data unavailable
Lower Explosive Limit: data unavailable
Upper Explosive Limit: data unavailable
Autoignition Temperature:
Not flammable
(USCG, 1999)
Melting Point:
234.5 ° F
(EPA, 1998)
Vapor Pressure:
9.4e-06 mm Hg
at 68.0 ° F
(EPA, 1998)
Vapor Density: data unavailable
Specific Gravity:
1.9
(EPA, 1998)
Boiling Point:
614.0 ° F
at 760 mm Hg
Decomposes
(EPA, 1998)
Molecular Weight:
290.83
(EPA, 1998)
Water Solubility:
<1 mg/mL
at 75° F
(NTP, 1992)
AEGL:
data unavailable
ERPG:
data unavailable
| TEEL-1 | TEEL-2 | TEEL-3 |
|---|---|---|
| 1.5 mg/m3 | 50.0 mg/m3 | 50.0 mg/m3 |
| (SCAPA, 2008) | ||
IDLH:
50.0 mg/m3
(NIOSH, 2003)
Regulatory Information
)
Regulatory Names - Names under which this chemical is regulated under several U.S. federal laws: CAA (Clean Air Act of 1990), CERCLA (Comprehensive Environmental Response, Compensation, and Liability Act of 1980, also known as Superfund), EPCRA (Emergency Planning and Community Right-to-Know Act, also known as SARA Title III), and RCRA (Resource Conservation and Recovery Act of 1976).
CAA RMP - Indicates whether this chemical is regulated under Section 112(r) of the Clean Air Act, which lists about 100 toxic, flammable, or explosive hazardous substances. (Section 112(r) mandates the Risk Management Plan regulations.) For listed chemicals, the Threshold Quantity (from 40 CFR 68) is also shown. Facilities that use more than the threshold quantity of a listed chemical in a process are subject to the CAA accidental release prevention provisions.
CERCLA - Indicates whether this chemical is listed as a hazardous substance under CERCLA. For listed chemicals, the Reportable Quantity (from 40 CFR 302) is also shown. Facilities that spill more than the reportable quantity of a listed chemical must report it to federal, state, and local governments.
EHS (EPCRA 302) - Indicates whether this chemical is listed as an Extremely Hazardous Substance under Section 302 of EPCRA. For listed chemicals, the Threshold Planning Quantity (from 40 CFR 355) is also shown. Facilities that store more than the threshold quantity of an EHS chemical must meet the reporting, community right-to-know, and emergency planning requirements of EPCRA.
TRI (EPCRA 313) - Indicates whether this chemical is listed as a toxic chemical under Section 313 (Toxics Release Inventory) of EPCRA. Facilities that manufacture, store, or use significant amounts of Section 313 chemicals may be required to submit annual reports about any releases into the environment (see 40 CFR 372).
RCRA Chemical Code - 4-character identification code assigned to this substance under RCRA.
CAA RMP - Indicates whether this chemical is regulated under Section 112(r) of the Clean Air Act, which lists about 100 toxic, flammable, or explosive hazardous substances. (Section 112(r) mandates the Risk Management Plan regulations.) For listed chemicals, the Threshold Quantity (from 40 CFR 68) is also shown. Facilities that use more than the threshold quantity of a listed chemical in a process are subject to the CAA accidental release prevention provisions.
CERCLA - Indicates whether this chemical is listed as a hazardous substance under CERCLA. For listed chemicals, the Reportable Quantity (from 40 CFR 302) is also shown. Facilities that spill more than the reportable quantity of a listed chemical must report it to federal, state, and local governments.
EHS (EPCRA 302) - Indicates whether this chemical is listed as an Extremely Hazardous Substance under Section 302 of EPCRA. For listed chemicals, the Threshold Planning Quantity (from 40 CFR 355) is also shown. Facilities that store more than the threshold quantity of an EHS chemical must meet the reporting, community right-to-know, and emergency planning requirements of EPCRA.
TRI (EPCRA 313) - Indicates whether this chemical is listed as a toxic chemical under Section 313 (Toxics Release Inventory) of EPCRA. Facilities that manufacture, store, or use significant amounts of Section 313 chemicals may be required to submit annual reports about any releases into the environment (see 40 CFR 372).
RCRA Chemical Code - 4-character identification code assigned to this substance under RCRA.
| Regulatory Names: |
|
CAA RMP:
Not a regulated chemical.
CERCLA:
Regulated chemical with a Reportable Quantity of 1 pounds.
EHS (EPCRA 302):
Regulated chemical with a
Reportable Quantity of 1 pounds and a
Threshold Planning Quantity of 1000/10000 pounds.
TRI (EPCRA 313):
Regulated chemical.
RCRA Chemical Code:
U129
Alternate Chemical Names
)
This section provides a listing of alternate names for this chemical, including trade names, synonyms, and foreign names.
- 1,2,3,4,5,6-HEXACHLOROCYCLOHEXANE
- 1,2,3,4,5,6-HEXACHLOROCYCLOHEXANE, ALPHA ISOMER
- 1,2,3,4,5,6-HEXACHLOROCYCLOHEXANE, GAMMA ISOMER
- 1,2,3,4,5,6-HEXACHLOROCYCLOHEXANE, GAMMA-ISOMER
- 1,2,3,4,5,6-HEXACHLOROCYLOHEXANE,GAMMA-ISOMER
- 1-ALPHA, 2-ALPHA, 3-BETA, 4-ALPHA, 5-ALPHA, 6-BETA-HEXACHLOROCYCLOHEXANE
- 1-ALPHA,2-ALPHA,3-BETA,4-ALPHA, 5-ALPHA,6-BETA-HEXACHLOROCYCLOHEXANE
- 666
- AALINDAN
- AFICIDE
- AGRISOL G-20
- AGROCIDE
- AGROCIDE 2
- AGROCIDE 6G
- AGROCIDE 7
- AGROCIDE III
- AGROCIDE WP
- AGRONEXIT
- AMEISENATOD
- AMEISENMITTEL MERCK
- APARASIN
- APHTIRIA
- APLIDAL
- ARBITEX
- ARCOTAL S
- BBH
- BEN-HEX
- BENHEXOL
- BENTOX 10
- BENZENE HEXACHLORIDE
- BENZENE HEXACHLORIDE-GAMMA-ISOMER
- BERCEMA-SPRITZ-LINDAN 50
- BEXOL
- BHC
- BHC (INSECTICIDE)
- CELANEX
- CHLORESENE
- CODECHINE
- CYCLOHEXANE, 1,2,3,4,5,6-HEXACHLORO-, GAMMA-
- CYCLOHEXANE, 1,2,3,4,5,6-HEXACHLORO-, GAMMA-ISOMER
- CYCLOHEXANE, HEXACHLORO-
- DBH
- DETMOL EXTRACT
- DETMOL-EXTRAKT
- DETOX 25
- DEVORAN
- DOL GRANULE
- DRILL TOX-SPEZIAL AGLUKON
- DRILLTOX-SPEZIAL AGLUKON
- ENT 7,796
- ENTOMOXAN
- EXAGAMA
- FENOFORM FORTE
- FORLIN
- FORST-NEXEN
- GALLOGAMA
- GAMACARBATOX
- GAMACID
- GAMACIDE
- GAMACIDE 20
- GAMAPHEX
- GAMENE
- GAMISO
- GAMMA BENZENE HEXACHLORIDE
- GAMMA ISOMER OF 1,2,3,4,5,6-HEXACHLOROCYCLOHEXANE
- GAMMA- 1,2,3,4,5,6-HEXACHLOROCYCLOHEXANE
- GAMMA- HEXACHLORANE
- GAMMA-1,2,3,4,5,6-HEXACHLOROCYCLOHEXANE
- GAMMA-666
- GAMMA-BENZENE HEXACHLORIDE
- GAMMA-BENZOHEXACHLORIDE
- GAMMA-BHC
- GAMMA-COL
- GAMMA-HCH
- GAMMA-HEXACHLOR
- GAMMA-HEXACHLORAN
- GAMMA-HEXACHLORANE
- GAMMA-HEXACHLOROBENZENE
- GAMMA-HEXACHLOROCYCLOHEXANE
- GAMMA-LINDANE
- GAMMAHEXA
- GAMMAHEXANE
- GAMMALIN
- GAMMALIN 20
- GAMMATERR
- GAMMEX
- GAMMEXANE
- GAMMOPAZ
- GAMOLINE
- GEOBILAN
- GEOLIN G 3
- GEXANE
- HCC
- HCCH
- HCH
- HECLOTOX
- HECOLTOX
- HEXACHLORAN
- HEXACHLORANE
- HEXACHLOROCYCLOHEXANE
- HEXACHLOROCYCLOHEXANE (GAMMA ISOMER)
- HEXACHLOROCYCLOHEXANE, GAMMA ISOMER
- HEXACHLOROCYCLOHEXANE, GAMMA-ISOMER
- HEXACHLOROCYLOHEXANE
- HEXATIN
- HEXATOX
- HEXAVERM
- HEXICIDE
- HEXYCLAN
- HGI
- HILBEECH
- HORTEX
- HUNGARIA L 7
- HUNGARIA L7
- INEXIT
- ISOTOX
- JACUTIN
- KANODANE
- KOKOTINE
- KWELL
- LASOCHRON
- LENDINE
- LENTOX
- LIDENAL
- LINDAFOR
- LINDAGAM
- LINDAGRAIN
- LINDAGRANOX
- LINDANE (ACGIH,DOT,OSHA)
- LINDANE (DOT FRENCH)
- LINDANE (DOT)
- LINDANE(DOT)
- LINDANE, [SOLID]
- LINDANO (DOT SPANISH)
- LINDAPOUDRE
- LINDATOX
- LINDEX
- LINDOSEP
- LINTOX
- LINTOX 3
- LINVUR
- LOREXANE
- MGLAWIK L
- MILBOL 49
- MSZYCHOL
- MSZYCOL
- NA 2761 (DOT)
- NCI-C00204
- NEO-SCABICIDOL
- NEXEN FB
- NEXEN-FB
- NEXIT
- NEXIT STARK
- NEXIT-STARK
- NEXOL E
- NEXOL-E
- NICOCHLORAN
- NOVIGAM
- OMNITOX
- OVADZIAK
- OWADZIAK
- OWADZLAK
- PEDRACZAK
- PFLANZOL
- PLK
- QUELLADA
- RCRA WASTE NUMBER U129
- SANG GAMMA
- SANG-GAMMA
- SILVANOL
- SPRITZ-RAPIDIN
- SPRITZLINDANE
- SPRUEHPFLANZOL
- STREUNEX
- TAP 85
- TRI-6
- VERINDAL ULTRA
- VITON
This page is maintained by the Office of Response and Restoration, NOAA's Ocean Service, National Oceanic and Atmospheric Administration.
US Government main portal: USA.gov.