! Started logfile: J1824+5651_S_2006_02_14_yyk_uvs.log on Wed Jul 5 13:25:56 2006 obs J1824+5651_S_2006_02_14_yyk_uva.fits ! Reading UV FITS file: J1824+5651_S_2006_02_14_yyk_uva.fits ! AN table 1: 206 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.661812 visibilities/baseline/integration-bin. ! Found source: J1824+5651 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2692 lines of history. ! ! Reading 24540 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1824+5651_S_2006_02_14_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.753133 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.463 mas, bmaj=8.987 mas, bpa=16.5 degrees ! Estimated noise=2.53214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.621364 Jy ! Component: 100 - total flux cleaned = 0.720702 Jy ! Total flux subtracted in 100 components = 0.720702 Jy ! Clean residual min=-0.031948 max=0.031959 Jy/beam ! Clean residual mean=-0.000008 rms=0.008496 Jy/beam ! Combined flux in latest and established models = 0.720703 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.720703 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.178085Jy sigma=2.705079 ! Fit after self-cal, rms=0.184579Jy sigma=2.439924 ! Inverting map and beam ! Estimated beam: bmin=2.463 mas, bmaj=8.987 mas, bpa=16.5 degrees ! Estimated noise=2.53214 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=8.588 mas, bpa=15.09 degrees ! Estimated noise=1.52611 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0413627 Jy ! Component: 100 - total flux cleaned = 0.063107 Jy ! Component: 150 - total flux cleaned = 0.0775902 Jy ! Component: 200 - total flux cleaned = 0.0874962 Jy ! Total flux subtracted in 200 components = 0.0874962 Jy ! Clean residual min=-0.021296 max=0.034005 Jy/beam ! Clean residual mean=-0.000179 rms=0.007595 Jy/beam ! Combined flux in latest and established models = 0.808199 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 35 components and 0.808199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177137Jy sigma=2.243765 ! Fit after self-cal, rms=0.176171Jy sigma=2.239334 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.114 x 8.588 at 15.09 degrees (North through East) ! Clean map min=-0.02122 max=0.70318 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02162 ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 0.95 KP 0.99 ! LA 1.25 MK 0.89 NL 0.93 OV 0.97 ! PT 1.00* SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.996248 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 0.98 KP 0.97 ! LA 1.19 MK 1.02 NL 0.95 OV 0.98 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.971966 ! Telescope amplitude corrections in sub-array 1: ! BR 1.26 FD 0.97 HN 0.98 KP 0.96 ! LA 0.95 MK 1.10 NL 1.02 OV 1.00 ! PT 1.00* SC 1.05 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.02117 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.13 KP 0.89 ! LA 0.91 MK 1.08 NL 0.94 OV 0.86 ! PT 1.00* SC 1.08 ! ! ! Fit before self-cal, rms=0.176171Jy sigma=2.239334 ! Fit after self-cal, rms=0.156307Jy sigma=1.662427 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156307Jy sigma=1.662427 ! Fit after self-cal, rms=0.156167Jy sigma=1.661269 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.161 mas, bmaj=8.673 mas, bpa=14.92 degrees ! Estimated noise=1.52743 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00475018 Jy ! Component: 100 - total flux cleaned = 0.00533754 Jy ! Component: 150 - total flux cleaned = 0.00533169 Jy ! Component: 200 - total flux cleaned = 0.00525679 Jy ! Total flux subtracted in 200 components = 0.00525679 Jy ! Clean residual min=-0.015047 max=0.016839 Jy/beam ! Clean residual mean=-0.000073 rms=0.004295 Jy/beam ! Combined flux in latest and established models = 0.813456 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.813455 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155927Jy sigma=1.656746 ! Fit after self-cal, rms=0.155702Jy sigma=1.656383 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.155702Jy sigma=1.656383 ! Fit after self-cal, rms=0.150433Jy sigma=1.444183 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8, -23). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0162697 Jy ! Component: 100 - total flux cleaned = 0.0246376 Jy ! Component: 150 - total flux cleaned = 0.0295774 Jy ! Component: 200 - total flux cleaned = 0.0336963 Jy ! Total flux subtracted in 200 components = 0.0336963 Jy ! Clean residual min=-0.008997 max=0.006448 Jy/beam ! Clean residual mean=-0.000035 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 0.847152 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 42 model components to the UV plane model. ! The established model now contains 88 components and 0.847152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148789Jy sigma=1.389869 ! Fit after self-cal, rms=0.149657Jy sigma=1.368771 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.161 x 8.673 at 14.92 degrees (North through East) ! Clean map min=-0.0085445 max=0.71234 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149657Jy sigma=1.368771 ! Fit after self-cal, rms=0.142842Jy sigma=1.237295 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142842Jy sigma=1.237295 ! Fit after self-cal, rms=0.143788Jy sigma=1.232053 ! Inverting map and beam ! Estimated beam: bmin=3.171 mas, bmaj=8.652 mas, bpa=14.75 degrees ! Estimated noise=1.51882 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00529286 Jy ! Component: 100 - total flux cleaned = 0.00667945 Jy ! Component: 150 - total flux cleaned = 0.00838805 Jy ! Component: 200 - total flux cleaned = 0.0100447 Jy ! Total flux subtracted in 200 components = 0.0100447 Jy ! Clean residual min=-0.010996 max=0.006376 Jy/beam ! Clean residual mean=-0.000040 rms=0.002051 Jy/beam ! Combined flux in latest and established models = 0.857197 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 39 model components to the UV plane model. ! The established model now contains 122 components and 0.857196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143536Jy sigma=1.210518 ! Fit after self-cal, rms=0.144315Jy sigma=1.208333 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144315Jy sigma=1.208333 ! Fit after self-cal, rms=0.140894Jy sigma=1.125400 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140894Jy sigma=1.125400 ! Fit after self-cal, rms=0.141227Jy sigma=1.124881 ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=8.655 mas, bpa=14.7 degrees ! Estimated noise=1.52017 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260545 Jy ! Component: 100 - total flux cleaned = 0.00483294 Jy ! Component: 150 - total flux cleaned = 0.00683703 Jy ! Component: 200 - total flux cleaned = 0.00856333 Jy ! Total flux subtracted in 200 components = 0.00856333 Jy ! Clean residual min=-0.007793 max=0.005322 Jy/beam ! Clean residual mean=-0.000044 rms=0.001589 Jy/beam ! Combined flux in latest and established models = 0.86576 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 150 components and 0.86576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140991Jy sigma=1.118205 ! Fit after self-cal, rms=0.141363Jy sigma=1.117632 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.423 mas, bmaj=9.333 mas, bpa=12.18 degrees ! Estimated noise=1.95265 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00444752 Jy ! Component: 100 - total flux cleaned = 0.00680403 Jy ! Component: 150 - total flux cleaned = 0.00874628 Jy ! Component: 200 - total flux cleaned = 0.0101985 Jy ! Total flux subtracted in 200 components = 0.0101985 Jy ! Clean residual min=-0.006815 max=0.006420 Jy/beam ! Clean residual mean=-0.000092 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.875958 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 161 components and 0.875958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141289Jy sigma=1.115719 ! Fit after self-cal, rms=0.141565Jy sigma=1.115232 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.504 mas, bmaj=8.993 mas, bpa=16.46 degrees ! Estimated noise=2.50537 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.615329 Jy ! Component: 100 - total flux cleaned = 0.715044 Jy ! Component: 150 - total flux cleaned = 0.751319 Jy ! Component: 200 - total flux cleaned = 0.772618 Jy ! Total flux subtracted in 200 components = 0.772618 Jy ! Clean residual min=-0.013414 max=0.013460 Jy/beam ! Clean residual mean=0.000018 rms=0.003558 Jy/beam ! Combined flux in latest and established models = 0.772618 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.772618 Jy ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=8.655 mas, bpa=14.7 degrees ! Estimated noise=1.52017 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0217184 Jy ! Component: 100 - total flux cleaned = 0.0358414 Jy ! Component: 150 - total flux cleaned = 0.0446449 Jy ! Component: 200 - total flux cleaned = 0.0520351 Jy ! Total flux subtracted in 200 components = 0.0520351 Jy ! Clean residual min=-0.011197 max=0.006377 Jy/beam ! Clean residual mean=-0.000022 rms=0.002332 Jy/beam ! Combined flux in latest and established models = 0.824653 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 58 components and 0.824653 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=6.423 mas, bmaj=9.333 mas, bpa=12.18 degrees ! Estimated noise=1.95265 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0122 Jy ! Component: 100 - total flux cleaned = 0.0207568 Jy ! Component: 150 - total flux cleaned = 0.0273336 Jy ! Component: 200 - total flux cleaned = 0.03257 Jy ! Total flux subtracted in 200 components = 0.03257 Jy ! Clean residual min=-0.007843 max=0.007068 Jy/beam ! Clean residual mean=-0.000070 rms=0.002293 Jy/beam ! Combined flux in latest and established models = 0.857223 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 119 components and 0.857223 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.173 mas, bmaj=8.655 mas, bpa=14.7 degrees ! Estimated noise=1.52017 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256446 Jy ! Component: 100 - total flux cleaned = 0.00498427 Jy ! Component: 150 - total flux cleaned = 0.00727197 Jy ! Component: 200 - total flux cleaned = 0.00852879 Jy ! Total flux subtracted in 200 components = 0.00852879 Jy ! Clean residual min=-0.008171 max=0.005670 Jy/beam ! Clean residual mean=-0.000033 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.865752 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 25 model components to the UV plane model. ! The established model now contains 139 components and 0.865752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141530Jy sigma=1.117891 ! Fit after self-cal, rms=0.141840Jy sigma=1.117236 wmodel J1824+5651_S_2006_02_14_yyk\_map.mod ! Writing 139 model components to file: J1824+5651_S_2006_02_14_yyk_map.mod wobs J1824+5651_S_2006_02_14_yyk\_uvs.fits ! Writing UV FITS file: J1824+5651_S_2006_02_14_yyk_uvs.fits wwins J1824+5651_S_2006_02_14_yyk\_map.win ! wwins: Wrote 2 windows to J1824+5651_S_2006_02_14_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00312029 Jy ! Component: 100 - total flux cleaned = -0.00380173 Jy ! Component: 150 - total flux cleaned = -0.00448981 Jy ! Component: 200 - total flux cleaned = -0.00519582 Jy ! Component: 250 - total flux cleaned = -0.00591471 Jy ! Component: 300 - total flux cleaned = -0.00632032 Jy ! Component: 350 - total flux cleaned = -0.00625766 Jy ! Component: 400 - total flux cleaned = -0.00619772 Jy ! Component: 450 - total flux cleaned = -0.00613897 Jy ! Component: 500 - total flux cleaned = -0.00602777 Jy ! Component: 550 - total flux cleaned = -0.00602767 Jy ! Component: 600 - total flux cleaned = -0.00581592 Jy ! Component: 650 - total flux cleaned = -0.00576383 Jy ! Component: 700 - total flux cleaned = -0.00566327 Jy ! Component: 750 - total flux cleaned = -0.00551895 Jy ! Component: 800 - total flux cleaned = -0.00551921 Jy ! Component: 850 - total flux cleaned = -0.00538099 Jy ! Component: 900 - total flux cleaned = -0.0053811 Jy ! Component: 950 - total flux cleaned = -0.00529446 Jy ! Component: 1000 - total flux cleaned = -0.0053375 Jy ! Component: 1050 - total flux cleaned = -0.0054616 Jy ! Component: 1100 - total flux cleaned = -0.0056246 Jy ! Component: 1150 - total flux cleaned = -0.00574362 Jy ! Component: 1200 - total flux cleaned = -0.00597664 Jy ! Component: 1250 - total flux cleaned = -0.00597576 Jy ! Component: 1300 - total flux cleaned = -0.0061253 Jy ! Component: 1350 - total flux cleaned = -0.00619888 Jy ! Component: 1400 - total flux cleaned = -0.00630714 Jy ! Component: 1450 - total flux cleaned = -0.00644868 Jy ! Component: 1500 - total flux cleaned = -0.00669253 Jy ! Component: 1550 - total flux cleaned = -0.00676061 Jy ! Component: 1600 - total flux cleaned = -0.00692958 Jy ! Component: 1650 - total flux cleaned = -0.00703023 Jy ! Component: 1700 - total flux cleaned = -0.00732586 Jy ! Component: 1750 - total flux cleaned = -0.00739026 Jy ! Component: 1800 - total flux cleaned = -0.00751791 Jy ! Component: 1850 - total flux cleaned = -0.00764424 Jy ! Component: 1900 - total flux cleaned = -0.00776872 Jy ! Component: 1950 - total flux cleaned = -0.00798333 Jy ! Component: 2000 - total flux cleaned = -0.00816522 Jy ! Total flux subtracted in 2048 components = -0.00837424 Jy ! Clean residual min=-0.001841 max=0.002197 Jy/beam ! Clean residual mean=-0.000018 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.857377 Jy keep ! Adding 125 model components to the UV plane model. ! The established model now contains 264 components and 0.857378 Jy ![Exited script file: muppet] wmap "J1824+5651_S_2006_02_14_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.173 x 8.655 at 14.7 degrees (North through East) ! Clean map min=-0.0055952 max=0.71283 Jy/beam ! Writing clean map to FITS file: J1824+5651_S_2006_02_14_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.712835 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000605462 device "J1824+5651_S_2006_02_14_yyk\_map.eps/VPS" ! Attempting to open device: 'J1824+5651_S_2006_02_14_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.254812 0.254812 0.509623 1.01925 2.03849 4.07699 8.15397 16.3079 32.6159 65.2318 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.712 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.173 x 8.655 at 14.7 degrees (North through East) ! Clean map min=-0.0055952 max=0.71283 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1824+5651_S_2006_02_14_yyk\_map.gif/gif" ! Attempting to open device: 'J1824+5651_S_2006_02_14_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1824+5651_S_2006_02_14_yyk_uvs.log closed on Wed Jul 5 13:26:45 2006