General Decision Number: AZ080011 02/13/2009 AZ11 Superseded General Decision Number: AZ20070016 State: Arizona Construction Type: Heavy Dams Counties: Maricopa, Mohave, Pima, Pinal and Yuma Counties in Arizona. DAM CONSTRUCTION PROJECTS Modification Number Publication Date 0 02/08/2008 1 04/04/2008 2 08/08/2008 3 08/22/2008 4 02/13/2009 * BOIL0627-003 10/01/2008 Rates Fringes BOILERMAKER......................$ 31.37 19.16 ---------------------------------------------------------------- BRAZ0003-006 07/01/2008 MARICOPA, MOHAVE, PINAL, AND YUMA COUNTIES Rates Fringes BRICKLAYER.......................$ 24.15 4.49 ---------------------------------------------------------------- BRAZ0003-012 10/05/2007 PIMA COUNTY Rates Fringes BRICKLAYER.......................$ 18.90 4.09 ---------------------------------------------------------------- * CARP0408-004 09/01/2007 Rates Fringes CARPENTER (Including Form Work)............................$ 22.50 5.97 PILEDRIVERMAN....................$ 23.00 5.97 ---------------------------------------------------------------- CARP1914-001 09/01/2007 Rates Fringes MILLWRIGHT Zone 1......................$ 23.29 12.34 Zone 2......................$ 24.67 12.34 Zone 3......................$ 27.79 12.34 ZONE DEFINITIONS FOR MILLWRIGHTS: Mileage shall be calculated from the construction site to the City Hall in Phoenix or Tucson, or to the workmen's residence, whichever is less: Zone 1: 0-30 miles Zone 2: 31-49 miles Zone 3: 50 miles and over ---------------------------------------------------------------- * CARP1914-002 09/01/2003 Rates Fringes DIVER (Standby) Zone 1......................$ 22.98 8.93 Zone 2......................$ 25.37 8.93 Zone 3......................$ 28.49 8.93 DIVER (Wet) Zone 1......................$ 43.79 8.93 Zone 2......................$ 45.17 8.93 Zone 3......................$ 48.29 8.93 ZONE DEFINITIONS: Mileage shall be calculated from the construction site to the City Hall in Phoenix or Tucson, or to the workmen's residence, whichever is less: Zone 1: 0-30 miles Zone 2: 31-49 miles Zone 3: 50 miles and over ---------------------------------------------------------------- ENGI0428-002 06/15/2008 Rates Fringes Power Equipment Operator Group 1.....................$ 19.89 8.84 Group 2.....................$ 23.16 8.84 Group 3.....................$ 24.24 8.84 Group 4.....................$ 25.27 8.84 POWER EQUIPMENT OPERATORS CLASSIFICATIONS: GROUP 1: A-frame boom truck, winch truck, air compressor, Beltcrete, boring bridge and texture, concrete mixer (skip type), conductor, brakeman, handler, conveyor, cross timing and pipe float, curing machine, dinky (under 20 tons), elevator hoist (Husky and similar), firemen (all), forklift and Ross carrier, generator (all), highline cableway signalman, hydrographic mulcher, hydrographic seeder, joint inserter, jumbo finishing machine, Kolman belt loader, machine conveyor, multiple power concrete saw, oiler, pavement breaker, power grizzly, power sweeper, pressure grout machine, pump, roller (except as otherwise classified), self-propelled chip spreading machine, skiploader (3 cu. yd. and less), slurry seal machine (Moto paver driver), small self-propelled compactor (with blade)-backfill, ditch operation, straw blower, tractor (D-5 and under), tripper, tugger, welding machine, wheel-type tractor (Ford, Ferguson type with attachments, Bee Gee etc.) GROUP 2: Aggregate plant (including crushing, screening and sand plants, etc.), asphalt plant mixer, asphalt laydown machine, backhoe (rubber tired or track, less than 1 cu. yd. MRC), Bee Gee operator boring machine, concrete batch plant (all types and sizes), concrete mechanical tamping, spreading or finishing machine (including Clary, Johnson or similar types), concrete mixer (paving type and mobile mixers), concrete pump, crane (crawler and pneumatic less than 15 ton capacity MRC), drilling machine (including water wells), elevating grader (all types and sizes except as otherwise classified), field equipment serviceman, paver and similar type equipment, motor grader (any type power blade-rough), oiler driver, operating engineer rigger, pneumatic tired scraper (all sizes and types), power jumbo form setter, road oil mixing machine, roller (on all types asphalt pavement), screed, self-propelled compactor (with blade, 815, 825 or equivalent-grade operation), skip loader (all types with a rated capacity over 3 but less than 6 cu. yd.), slip form (power driven lifting device for concrete forms), soil cement road mixingmachine (single pass type), heater and planer, tractor (dozer, pusher-all), traveling pipe-wrapping machine, trenching machine, tugger (two or more) GROUP 3: Asphalt or concrete planing, rotomill and milling machine, auto grade machine (CMI and similar equipment), boring machine (including mole, badger and similar type), concrete pump (truck mounted with boom), crane (crawler and pneumatic over 15 tons but less than 100 tons capacity MRC), crawler type tractor with boom attachment and slope bar, derrick, Gradall, heavy duty mechanic/welder, helicopter hoist operator or pilot, highline cableway, mass excavator (150 Bucyrus, Erie and similar type), mechanical hoist (two or more drums), motor grader (any type power blade-finish), mucking machine, overhead crane, Grade Checker, piledriver engineer (portable, stationary or skid rig), power driven ditch lining or ditch trimming machine, remote control earth moving machine, skip loader (all types with rated capacity 6 cu. yd. but less than 10 cu. yd.), slip form paving machine (including Gunnert, Zimmerman and similar types), tower crane or similar type, universal equipment operator (backhoe, clamshell, dragline, shovel etc., up to 10 cu. yd.); Operating Engineers Electrician including Tower Erector, Lineman & Cable Splicer (load side of main disconnect). GROUP 4: Crane operator (pneumatic or crawler-100 tons hoisting capacity and over, MRC rating), skip loader (all types with rated capacity of 10 cu. yd. or more), universal equipment operator (backhoe, clamshell, dragline, shovel, etc., 10 cu. yd. and over) Multiple-Unit Earth Equipment (Holland Loader etc.), Tractor operator, Pneumatic-Tired or Track type, Two Units-$0.50 per hour over base rate; and $1.00 per hour for each additional unit All Operators, Oilers, and Motor Crane Drivers on equipment with Booms, except concrete pumping truck booms, including Jibs, shall receive $0.01 per hour per foot over 80 ft in addition to regular rate of pay Premium pay for performing hazardous waste removal $0.50 per hour over base rate. ---------------------------------------------------------------- IRON0075-001 08/01/2008 Rates Fringes Ironworkers: Zone 1:.....................$ 25.52 16.39 Zone 1: 0 to 50 miles from City Hall in Phoenix or Tucson Zone 2: 050 to 100 miles - Add $4.00 Zone 3: 100 to 150 miles - Add $5.00 Zone 4: 150 miles & over - Add $6.50 ---------------------------------------------------------------- LABO0383-001 06/01/2007 Rates Fringes Laborers: Group 1.....................$ 14.74 4.55 Group 2.....................$ 15.64 4.55 Group 3.....................$ 16.34 4.55 Group 4.....................$ 17.28 4.55 Group 5.....................$ 18.14 4.55 LABORERS CLASSIFICATIONS: GROUP 1: Laborer, general or construction; tool dispatcher or checker; manually controlled signal operator; fence builder, guard rail builder-highway; chat box man; dumpman and/or spotter; rip rap stone man; rock slinger; form stripper; packing rod steel and pans; cesspool diggers and installers; astro turf layer; clean up-bull gang trackman, railroad; chipper (clearing and grubbing); kettleman-tarman; spikers, wrenchers-creosote tieman; floor sanders-concrete; sandblaster (pot tender); powderman tender; fine grader; all tenders not herein separately classified; window cleaner; flagger GROUP 2: Concrete laborer (belt, pipe and/or hoseman); cement mason tender; cutting torch operator; power type concrete buggy; bander; guinea chaser GROUP 3: Operator and tender of pneumatic and electric tools; concrete vibrating machines, chain saw (on clearing and grubbing); hydraulic jacks and similar mechanical tools not separately herein classified; pipe caulker and/or backup man-pipeline; riggers and signal man-pipeline; pipe wrapper; cribber & shorer (except tunnel); pneumatic gopher; pre-cast manhole erector GROUP 4: Asphalt raker and ironer; air and water washout nozzleman (low and high pressure); scaler (using bos'n's chair or safety belt); tamper (mechanical-all types); sandblaster (nozzleman); concrete saw (hand-guided); concrete cutting torch; gunite (gunman, mixerman, rodman); bio-filer, pressman, installer, operator; hand-guided trencher and similarly operated equipment; driller (jackhammer and/or pavement breaker); grade setter (pipeline); pipe layer including but not limited to non-metallic transite and plastic pipe, water pipe, sewer pipe, drain pipe, and underground tile pipe and conduit); chuck tender (except tunnel) GROUP 5: Drill doctor and/or air tool repairman; scaler (driller); form setter and/or builder; welder and/or pipelayer installing process piping; driller-core, diamond, wagon, air track, Joy, Mustang, PR-143, 220 Gardner-Denver, Hydrasonic, powderman; water blaster operator NOTE: $0.50 per hour premium for performing hazardous waste removal ---------------------------------------------------------------- PAIN0086-004 04/01/2007 Rates Fringes PAINTER..........................$ 20.62 4.10 ---------------------------------------------------------------- PLAS0394-004 07/01/2007 Rates Fringes CEMENT MASON/CONCRETE FINISHER Area 1......................$ 21.34 8.07 ---------------------------------------------------------------- PLUM0469-007 07/01/2006 MARICOPA, MOHAVE, AND YUMA COUNTIES Rates Fringes PLUMBER/PIPEFITTER (Zone 1)......$ 31.00 12.00 ZONE DEFINITIONS FOR PLUMBERS AND PIPEFITTERS ZONE 1: Area within a 20 mile radius of the center of the following towns: Flagstaff, Holbrook, Kingman, Lake Havasu City, Prescott, Show Low, Springerville, Winslow, Ymua, and St John's, and area within 40 miles of the center of Phoenix. ZONE 2: Area outside the above radius-add $3.00 to Zone 1 rate. ---------------------------------------------------------------- PLUM0741-006 07/01/2007 PIMA AND PINAL COUNTIES Rates Fringes PLUMBER/PIPEFITTER...............$ 24.25 12.65 INDUSTRIAL WORK: Add $2.00 to basic hourly rate. ---------------------------------------------------------------- SUAZ1994-012 02/01/1994 Rates Fringes ELECTRICIAN......................$ 16.00 2.84 ---------------------------------------------------------------- TEAM0104-002 06/01/2007 Rates Fringes TRUCK DRIVER Group 1.....................$ 13.37 3.40+a Group 2.....................$ 17.18 3.40+a Group 3.....................$ 17.58 3.40+a Group 4.....................$ 18.20 3.40+a Group 5.....................$ 18.44 3.40+a Group 6.....................$ 19.02 3.40+a Group 7.....................$ 20.64 3.40+a FOOTNOTE: a. Health & Welfare $586.36 per month. TRUCK DRIVER CLASSIFICATIONS: GROUP 1: Pickup Driver, Station Wagon Driver, Man Haul Driver, Self-propelled Street Sweeper, Buggymobile 1 cu yd or less, Vacuum Pump Truck Driver, Forklift or Fork Truck or Ross Carrier, Dumpster under 7 cu yd, Slurry type equipment driver or Leverman, Flaherty Spreader or Leverman GROUP 2: 2 or 3 axle Dump or Flatrack Driver, Water Truck under 2500 gal., Boom Truck "A" Frame, Ginpole Winch Truck and similar equipment, Heavy Duty Mechanic / Welder GROUP 3: 4 axle Dump/Flatrack, Dumpster 7 cu yd and over, Redi- Mix Driver less than 10.5 cu yd, Concrete Pump Driver(when integral part of Redi-Mix Truck), Oil Tanker/Distributor Truck Driver/Bootman/Retortman/Leverman, Foremost Rollagon/Melroe/Hosky and similar type equipment when hauling men, material, and equipment GROUP 4: 5 axle Dump or Flatrack Driver, Water Truck 2500 gal to 3900 gal.; Redi-Mix Drivers 10.6 cu yd and up to 14 cu yd, Hydro Lift, Swedish Crane, Iowa 300 and similar types. GROUP 5: 6-axle Dump or Flatrack Driver, Rock Truck Driver (Dart, Euclid, CAT Payhauler, and other similar type and Dumps, Single Unit) less than 16 cu yd.; Water Truck 3900 gal and over. GROUP 6: 7-axle Dump or Flatrack Driver, 8-axle Dump or Flatrack Driver, Redi-Mix Driver 14 cu yd or over Eject-alls, GROUP 7: Off-highway Equipment Driver including but not limited to: 2 or 4 wheel Power Unit (CAT DW Series, Euclid, International, and Similar type equipment), Transporting material when Top Loaded or by external means, including pulling Water Tanks (Water Pulls, Fuel Tanks) Rock Trucks 16 cu yd up to 25 cu yd. ---------------------------------------------------------------- WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental. ================================================================ Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)). ---------------------------------------------------------------- In the listing above, the "SU" designation means that rates listed under the identifier do not reflect collectively bargained wage and fringe benefit rates. Other designations indicate unions whose rates have been determined to be prevailing. ---------------------------------------------------------------- WAGE DETERMINATION APPEALS PROCESS 1.) Has there been an initial decision in the matter? This can be: * an existing published wage determination * a survey underlying a wage determination * a Wage and Hour Division letter setting forth a position on a wage determination matter * a conformance (additional classification and rate) ruling On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour Regional Office for the area in which the survey was conducted because those Regional Offices have responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed. With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to: Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC 20210 2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to: Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC 20210 The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue. 3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to: Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W. Washington, DC 20210 4.) All decisions by the Administrative Review Board are final. ================================================================ END OF GENERAL DECISION