[Federal Register: January 23, 2004 (Volume 69, Number 15)] [Notices] [Page 3344-3349] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr23ja04-47] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [OPPT-2004-0004]; FRL-7342-8] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSC, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from December 1, 2003 to December 24, 2003, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the docket ID number OPPT-2003-0004 and the specific PMN number or TME number, must be received on or before February 23, 2004. ADDRESSES: Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION. FOR FURTHER INFORMATION CONTACT: Barbara Cunningham, Director, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. B. How Can I Get Copies of this Document and Other Related Information? 1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2003-0004. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566- 0280. 2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/. An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select ``search,'' then key in the appropriate docket ID number. Certain types of information will not be placed in the EPA Dockets. [[Page 3345]] Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket. For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket. Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff. C. How and To Whom Do I Submit Comments? You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked ``late.'' EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute. 1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/ , and follow the online instructions for submitting comments. Once in the system, select ``search,'' and then key in docket ID number OPPT-2003-0004. The system is an ``anonymous access'' system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment. ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2003-0004 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an ``anonymous access'' system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e- mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption. 2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460- 0001. 3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2003-0004 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. D. How Should I Submit CBI to the Agency? Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT. [[Page 3346]] E. What Should I Consider as I Prepare My Comments for EPA? You may find the following suggestions helpful for preparing your comments: 1. Explain your views as clearly as possible. 2. Describe any assumptions that you used. 3. Provide copies of any technical information and/or data you used that support your views. 4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide. 5. Provide specific examples to illustrate your concerns. 6. Offer alternative ways to improve the notice or collection activity. 7. Make sure to submit your comments by the deadline in this document. 8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from December 1, 2003 to December 24, 2003, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non- CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 50 Premanufacture Notices Received From: 12/01/03 to 12/24/03 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-04-0153 12/01/03 02/28/04 CBI (G) Phosphor (G) Rare earth phosphate P-04-0154 12/01/03 02/28/04 NA Industries, Inc. (S) A binder resin (G) 2-propenoic acid, for plastics coating 2-methyl-, polymer with 2-hydroxypropyl 2-propenoate, 2- propenenitrile, alkyl 2-methyl-2- propenoate and 1- propene,homopolymer, chlorinated P-04-0156 12/03/03 03/01/04 CBI (G) Contained use (G) Cobalt catalyst P-04-0157 12/03/03 03/01/04 CBI (S) A monomer for the (G) Diaryl carbonate production of specialty polymers; export P-04-0159 12/04/03 03/02/04 CBI (G) By product (S) Phosphonoacetic acid P-04-0160 12/04/03 03/02/04 Biolab, Inc. (S) Scale/corrosion (G) Derivative of control agent for acrylic acid cooling water copolymer systems P-04-0161 12/05/03 03/03/04 Great Lakes Chemical (G) Lubricant (S) Phosphonic acid, Corporation additive di-C12 14-alkyl esters P-04-0162 12/05/03 03/03/04 CBI (G) Processing acid (G) Salt of a copolymer of acrylic acid and acrylic acid derivatives P-04-0163 12/05/03 03/03/04 CBI (G) open, non- (G) Amine prepolymer dispersive use P-04-0164 12/05/03 03/03/04 CBI (G) Manufacturing of (G) Urethane polymer protective devices P-04-0165 12/04/03 03/02/04 CBI (G) Additive flame (S) Phenol, 4,4'-(1- retardant resin methylethylidene)bis component for [2,6-dibromo-, molding electrical polymer with and automotive (chloromethyl)oxiran electronics parts e, 2,4,6- tribromophenyl ethers P-04-0166 12/08/03 03/06/04 CBI (S) Crosslinker for (G) Carbodiimide polyurethane crosslinker, dispersions; polycarbodiimde crosslinker for crosslinker acrylic latexes P-04-0167 12/09/03 03/07/04 Meadwestvaco (S) Asphalt (G) Amides, from Corporation - emulsifier salt aliphatic and Specialty Chemicals cycloaliphatic Division acids, polyamines, hydrochlorides P-04-0168 12/09/03 03/07/04 Meadwestvaco (S) Asphalt (G) Amides, from oil- Corporation - emulsifier salt based fatty acids, Specialty Chemicals polyamines, Division hydrochlorides P-04-0169 12/09/03 03/07/04 Meadwestvaco (S) Asphalt (G) Amides, from Corporation - emulsifier salt glycerides, Specialty Chemicals polyamines, Division hydrochlorides P-04-0170 12/09/03 03/07/04 Meadwestvaco (S) Asphalt (G) Amides, from Corporation - emulsifier salt fatty acids, Specialty Chemicals polyamines, Division hydrochlorides [[Page 3347]] P-04-0171 12/09/03 03/07/04 Meadwestvaco (S) Asphalt (G) Amides, from Corporation - emulsifier salt plant drived fatty Specialty Chemicals acids, polyamines, Division hydrochlorides P-04-0172 12/09/03 03/07/04 CIBA Specialty (S) Oxidative (G) Organo-manganese Chemicals catalyst for use in complex Corporation multipurpose stain removers P-04-0173 12/10/03 03/08/04 CBI (G) Additive in (G) Metallic acrylate radiation cured coatings, adhesives and inks. P-04-0174 12/10/03 03/08/04 3M (G) Protective (G) Fluoroacrylate coating modified urethane P-04-0175 12/11/03 03/09/04 CBI (G) Surfactant/ (G) Alkyl alkoxylate wetting agent P-04-0176 12/11/03 03/09/04 3M (S) Chemical (G) Fluorinated intermediate oligomer alcohol P-04-0177 12/11/03 03/09/04 Dynea USA (S) Adhesive for wood (G) Melamine resin products P-04-0178 12/12/03 03/10/04 CBI (G) Radiation cured (G) Polyester coatings and inks acrylate P-04-0179 12/15/03 03/13/04 CBI (S) Urethane foam (G) Tertiary amine catalyst carboxylic acid compound P-04-0180 12/15/03 03/13/04 CBI (G) An open non- (G) Rosin modified dispersive use phenolic resin P-04-0181 12/16/03 03/14/04 CBI (G) Additive for (G) Phenolic resin electrical insulating coatings P-04-0182 12/16/03 03/14/04 CBI (G) Water reducer in (G) Polyglycolether- concrete polycarboxylate P-04-0183 12/17/03 03/15/04 Eastman Kodak Company (G) Chemical (G) Heterocyclic intermediate, substituted destructive use nitrobenzenecarboxam ide P-04-0184 12/17/03 03/15/04 Croda Inc. (S) Irritancy (S) Oxirane, methyl-, mitigator for polymer with household and oxirane, industrial specialty hexanedioate (2:1), products; ditetradecyl ether solubilizer for semi- polar and non-polar compounds into polar media; skin emollient for household and industrial specialty products; pigment wetting agent and dispersant for coatings P-04-0185 12/18/03 03/16/04 CBI (G) Polymeric (G) Sulfonated ketone admixture for resin cements (open, non- dispersive use) P-04-0186 12/17/03 03/15/04 CBI (G) Thermal transfer (S) 2-propenoic acid, ink ribbon 2-methyl-, 1,1- dimethylethyl ester, polymer with ethenylbenzene, 2- hydroxyethyl 2- methyl-2-propenoate and methyl 2-methyl- 2-propenoate, 2,2'- azobis[2- methylpropanenitrile ]-initiated P-04-0187 12/18/03 03/16/04 CBI (G) Packaging and (G) Modified bottle application polyester P-04-0188 12/19/03 03/17/04 Eastman Kodak Company (G) Chemical (G) Heterocyclic intermediate, substituted destructive use sulfonyloxybenzeneca rboxamide P-04-0189 12/19/03 03/17/04 Eastman Kodak Company (G) Chemical (G) Alkyl substituted intermediate, acid chloride destructive use P-04-0190 12/22/03 03/20/04 CBI (S) Inks; coatings (G) Polyester acrylate P-04-0191 12/22/03 03/20/04 CBI (S) Automotive (G) industry Cycloaliphaticdiisoc yanate, homopolymer, compound with alkanedioic acid ester P-04-0192 12/22/03 03/20/04 CBI (G) Ingredients for (G) Alkylthioalkane use in consumer products: highly dispersive P-04-0193 12/22/03 03/20/04 CBI (G) Chemical (S) Hydroxylamine, 0- intermediate [(2e)-3-chloro-2- propenyl]- P-04-0194 12/22/03 03/20/04 CBI (G) Highly dispersive (G) use Dioxacycloheptanone P-04-0195 12/23/03 03/21/04 Lonza Inc. (G) As a polymer aid (G) processing Alkyldimethylbenzyla mmonium alkylsulfate P-04-0196 12/23/03 03/21/04 CBI (G) Wear resistant (G) Silane reaction additive products with alumina P-04-0197 12/23/03 03/21/04 CBI (G) Industrial (G) Telechelic structural materials polyacrylates P-04-0198 12/23/03 03/21/04 CBI (G) Industrial (G) Telechelic structural materials polyacrylates P-04-0199 12/23/03 03/21/04 Cht r. Beitlich (S) Hydrophilic (S) Siloxanes and Corporation silicone softner for silcones, 3-[3- textile finishing; (C12 16- hair conditioning aklyldimethylammonio agent )-2-hydroxypropoxy]- propyl me, di-me, [[[3-[3-(C12 16- aklyldimethtylammnon io)-2- hydroxy]propyl]- dimethylsilyl]oxy]- terminated, acetates (salts) [[Page 3348]] P-04-0200 12/23/03 03/21/04 Cht r. Beitlich (S) Hydrophilic (S) Siloxanes and Corporation silicone softner for silicones, 3-[3-[[3- textile finishing; (coco hair conditioning acylamino)propyl]dim agent ethylammonio]-2- hydroxyproxy]propyl me, 3-(2,3- dihydroxypropy)propy l me. di-me, mixed[[[3-[3-[[3- (coco acylamino)propyl]dim ethylammonio]-2- hydroxypropyl] propyl]- dimethylsilyl]oxy]- and [[[3-(2,3- dihydroxypropxy)prop yl]dimethylsilyl]oxy ]- terminated, acetates (salts) P-04-0201 12/23/03 03/21/04 CBI (G) Destructive use (G) Substituted for resins. norbornene P-04-0202 12/24/03 03/22/04 CBI (G) Resin for (G) Water based protective acrylic dispersion inductrial coating P-04-0203 12/24/03 03/22/04 Reichhold, Inc. (G) Polyester base (G) Alkanediols, resin polymer with carboxylic acid anhydrides, reacted with branched alcohol and carboxylic acid. P-04-0235 12/22/03 03/20/04 ConocoPhillips (S) Olefin (S) Naphtha, C4 11- Company manufacturing alkane, branched and feedstock; specialty linear solvents; alcohol denaturant; fuel blendstock -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: II. 37 Notices of Commencement From:12/01/03 to 12/24/03 ---------------------------------------------------------------------------------------------------------------- Commencement Notice Case No. Received Date End Date Chemical ---------------------------------------------------------------------------------------------------------------- P-01-0688 12/17/03 12/11/03 (G) Alkyl aryl sulfonate, calcium salt P-01-0900 12/18/03 12/05/03 (G) Carboxylic acid salt P-01-0904 12/09/03 11/15/03 (S) Silane, ethenyltriethoxy-, reaction products with silica P-02-0404 12/09/03 11/19/03 (G) Aliphatic polyester polyurethane with tertiary amine P-02-0816 12/03/03 11/20/03 (G) Polyaromatic urethane P-03-0046 12/11/03 11/25/03 (S) 1-propanaminium, 3- amino-n-(carboxymethyl)- n,n-dimethyl-, n-soya acyl derivs., inner salts P-03-0419 12/10/03 12/02/03 (G) Substituted cuprate [triazin-hydroxy- .alpha.o][[(hydroxy- .alpha.o) sulfophenyl]azo- .alpha.n1]- methoxyphenyl]azo- .alpha.n1] naphthalenedisulfonato-, sodium salt P-03-0420 12/08/03 11/21/03 (G) N,n-alkenebis-n-fatty acid amide P-03-0489 12/08/03 11/13/03 (G) Poly (dimethyl) siloxane P-03-0490 12/08/03 11/13/03 (G) Poly (dimethyl) siloxane P-03-0491 12/08/03 11/13/03 (G) Poly(dimethyl) siloxane P-03-0533 12/18/03 11/25/03 (S) 2-propenoic acid, 2- methyl-, (trimethoxysilyl)methyl ester P-03-0560 12/15/03 12/03/03 (G) Macrocyclic alkoxy ether P-03-0567 12/05/03 11/05/03 (G) Phosphonium salt of substituted alkylsulfonate P-03-0578 12/15/03 11/21/03 (G) Acrylic solution polymer P-03-0589 12/16/03 11/19/03 (G) Polyurethane prepolymer P-03-0605 12/22/03 11/26/03 (G) Styrene acrylic copolymer P-03-0615 12/10/03 12/02/03 (G) Hydrolyzed silane P-03-0620 12/05/03 11/17/03 (G) Aminocarboxylic acid, alkaline salt P-03-0621 12/05/03 11/17/03 (G) Aminocarboxylic acid, alkaline salt P-03-0622 12/18/03 11/28/03 (G) Substituted alkanediol diacrylate P-03-0637 12/08/03 10/31/03 (G) Polysiloxane P-03-0665 12/02/03 10/27/03 (G) Alkyd resin P-03-0668 12/08/03 11/19/03 (G) Acrylic solution polymer P-03-0672 12/17/03 11/11/03 (S) Boron, trifluoro(tetrahydrofuran )-, (t-4)-, polymer with 3-methyl-3-[(2,2,2- trifluoroethoxy)methyl]ox etane, ether with 2,2- dimethyl-1,3-propanediol (2:1), bis(hydrogen sulfate), diammonium salt P-03-0673 12/17/03 11/11/03 (S) Boron, trifluoro(tetrahydrofuran )-, (t-4)-, polymer with 3-methyl-3-[(2,2,3,3,3- pentafluoropropoxy)methyl ]oxetane, ether with 2,2- dimethyl-1,3-propanediol (2:1), bis(hydrogen sulfate), diammonium salt [[Page 3349]] P-03-0697 12/11/03 11/05/03 (G) Rosin, polymer with a monocarboxylic acid, alkylphenol, formaldehyde, maleic anhydride and pentaerythritol. P-03-0705 12/02/03 11/02/03 (G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), calcium potassium salt P-03-0723 12/18/03 12/09/03 (G) Substituted alkylamino phenyl azo substitute isoindole P-03-0746 12/23/03 11/26/03 (G) Polymeric aromatic amine colorant P-03-0754 12/02/03 11/10/03 (G) Telechelic polyacrylates P-03-0760 12/19/03 12/11/03 (S) 1-octanesulfonic acid P-03-0765 12/18/03 12/06/03 (G) Phenol, 4,4'-(1- methylethylidene)bis, polymer with (chloromethyl)oxirane, reaction products with a cycloaliphatic amine P-03-0766 12/15/03 11/14/03 (G) Alkoxysilyldiesteramine P-03-0768 12/18/03 12/08/03 (G) Reactive azo dye P-96-0434 12/02/03 11/19/03 (G) Isocyanate-terminated polyester polyurethane prepolymer P-97-1087 12/10/03 11/17/03 (G) Alkyl me siloxanes ---------------------------------------------------------------------------------------------------------------- List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: January 16, 2004 Carolyn Thornton, Acting, Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. 04-1448 Filed 1-22-04; 8:45 am] BILLING CODE 6560-50-S