Identification_Information: Citation: Citation_Information: Originator: United States Department of Agriculture (USDA), National Agricultural Statistics Service (NASS), Research and Development Division, Geospatial Information Branch, Spatial Analysis Research Section (SARS) Publication_Date: 20060314 Title: USDA - NATIONAL AGRICULTURE STATISTICS SERVICE'S 1:100,000-SCALE 2005 CROPLAND DATA LAYER, A Crop-Specific Digital Data Layer for North Dakota, 2006 March 14 Edition: 2005 edition Geospatial_Data_Presentation_Form: raster digital data Series_Information: Series_Name: USDA-NASS Cropland Data Layer, an annual publication begun in 1997 Issue_Identification: 2005 edition Publication_Information: Publication_Place: USDA-NASS Marketing Division, Washington, D.C. Publisher: United States Department of Agriculture (USDA), National Agriculture Statistics Service (NASS) Other_Citation_Details: Available only on CD-Rom or DVD through the official website http://www.nass.usda.gov/research/Cropland/SARS1a.htm. Description: Abstract: The USDA-NASS 2005 North Dakota Cropland Data Layer is a raster, geo-referenced, categorized land cover data layer produced using satellite imagery from the Thematic Mapper (TM) instrument on Landsat 5. The imagery was collected between the dates of 04/22/2005 and 09/20/2005. The approximate scale is 1:100,000 with a ground resolution of 30 meters by 30 meters. The North Dakota data layer is aggregated to 16 standardized categories for display purposes with the emphasis being agricultural land cover. This is part of an annual series in which several states are categorized annually based on the extensive field observations collected during the annual NASS June Agricultural Survey. However, no farmer reported data is derivable from the Cropland Data Layer. Purpose: The purpose of the Cropland Data Layer Program is to use satellite imagery on an annual basis to (1) provide supplemental acreage estimates for the state's major commodities and (2) produce digital, crop specific, categorized geo-referenced output products. These data are intended for geographic display and analysis at the state level. The cropland data layers are provided "as is". USDA/NASS does not warrant results you may obtain using the data. Supplemental_Information: PEDITOR is used as the NASS' main image processing software. PEDITOR has been maintained in-house and contains much of the functionality available in commercial image processing systems. However, program/process modifications are relatively easy to support in a research type environment, and the development/release cycle is faster. PEDITOR is deployed in all participating NASS State Statistical Field Offices to handle the ground truthing process and all image processing tasks, and is continuously tested with the Spatial Analysis Research Section (SARS) in Fairfax, Virginia. Currently, PEDITOR runs on most Microsoft Windows platforms; however, PEDITOR's batch processing system programs is only supported on Windows XP. Additional information about ArcReader from ESRI can be found at www.esri.com/arcreader. Additional information about EarthSat Inc's ortho-rectified GeoCover Stock used to georegister the NASS Cropland Data Layer can be found at http://www.geocover.com/. Time_Period_of_Content: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20050422 Ending_Date: 20050920 Currentness_Reference: ground condition Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -104.3462 East_Bounding_Coordinate: -96.5616 North_Bounding_Coordinate: 48.9865 South_Bounding_Coordinate: 45.9119 Keywords: Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: crop cover Theme_Keyword: classification Theme_Keyword: cropland Theme_Keyword: agriculture Theme_Keyword: land cover Theme_Keyword: crop estimates Theme_Keyword: crop identification Theme_Keyword: Landsat Place: Place_Keyword_Thesaurus: None Place_Keyword: North Dakota Temporal: Temporal_Keyword_Thesaurus: None Temporal_Keyword: 2005 Access_Constraints: None Use_Constraints: There are NO copyright restrictions with either the NASS Cropland categorized imagery or ESRI's ArcReader software included on the CD-Rom or DVD. The NASS Cropland categorized imagery is considered public domain and FREE to redistribute. However, NASS would appreciate acknowledgment or credit for the usage of our categorized imagery. Point_of_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USDA/NASS/RDD/SARS Contact_Person: USDA-NASS Spatial Analysis Research Section staff Contact_Address: Address_Type: mailing address Address: 3251 Old Lee Highway, Rm 305 City: Fairfax State_or_Province: Virginia Postal_Code: 22030-1504 Country: USA Contact_Voice_Telephone: 703/877-8000 Contact_Facsimile_Telephone: 703/877-8044 Contact_Electronic_Mail_Address: HQ_RD_OD@nass.usda.gov Native_Data_Set_Environment: The data layer is distributed in a GEOTIFF image file format. The hardware requirements for processing this data set are as follows: for digitizing/ground truth editing, any of the 32 bit Microsoft OS's will work. For computationally intensive jobs including; scene processing, clustering, classification, estimation and mosaicking a batch type system is utilized where jobs can be queued on different devices, and the minimum requirements are NT/2000/XP. Image processing is performed by PEDITOR, where PEDITOR utilizes the Windows console along with environmental variables, and neither are available with 95/98. PEDITOR as it is now constituted, will only run under the Microsoft Windows operating systems. A Microsoft Visual FoxPro application called the Remote Sensing Project or RSP is used to manage the ground truth collection process, and track each segment to its completion. Commercial off the shelf software XLNT from Advanced Systems Concepts, allows for batch job processing on the NT/2000/XP operating systems. SARS utilizes XLNT to run computationally intensive jobs that are shared across network resources to expedite processing. Data_Quality_Information: Attribute_Accuracy: Attribute_Accuracy_Report: Due to the extensiveness of the attribute accuracy report, the accuracy metadata is published on the CD-ROM or DVD in an html format. NASS reports the Analysis District coverage, sensors used, percent correct and kappa coefficients, regression analysis by Analysis District, the sampling frame scheme, and the original cover type signatures. Classification accuracy is generally between 85% to 95% correct for agricultural-related land cover categories. Quantitative_Attribute_Accuracy_Assessment: Attribute_Accuracy_Value: Classification accuracy is generally between 85% to 95% correct for agricultural-related land cover categories. Attribute_Accuracy_Explanation: NASS collects the remote sensing Acreage Estimation Program's field level training data during the June Agricultural Survey. This is a national survey based on a stratified random sample of land areas selected from each state's area frame. An area frame is a land use stratification based on percent cultivation. Our enumerators are given questionnaires to ask the farmers what, where, when and how much are they planting. Our surveys focus on cropland, but the enumerators record all land covers within the sampled area of land whether it is cropland or not. NASS uses broad land use categories to define land that is not under cultivation, including; non-agricultural, pasture/rangeland, waste, woods, and farmstead. NASS defines these non-agricultural land use types very broadly, which makes it difficult to precisely know what specific type of land use/cover actually is on the ground. For instance, there is no breakdown as to the type of woods in a given field/pasture, that's where the power of a GIS could be useful. If a external forestry GIS layer was overlaid, the land use can be accurately identified, and the specific cover type can be derived from the data layer. SARS is currently looking at creating extra categories for the enumerators to better identify non-cropland features, thereby, increasing the accuracy and improving the appearance of the classification. Logical_Consistency_Report: The accuracy of the land cover classifications are evaluated using the extensive training data collected in the annual NASS June Agricultural Survey (JAS). Completeness_Report: The entire state of North Dakota is included in the Cropland Data Layer. Positional_Accuracy: Horizontal_Positional_Accuracy: Horizontal_Positional_Accuracy_Report: The categorized images are co-registered to EarthSat Inc's ortho-rectified GeoCover Stock Mosaic images using automated block correlation techniques. The block correlation is run against band two of each original raw satellite image and band two of the GeoCover Stock Mosaic. The resulting correlations are applied to each categorized image, and then added to a master image or mosaic using PEDITOR. The EarthSat images were chosen as they provide the best available large area ortho-rectified images as a basis to register large volume Landsat images with. Quantitative_Horizontal_Positional_Accuracy_Assessment: Horizontal_Positional_Accuracy_Value: 50 meters root mean squared error overall Horizontal_Positional_Accuracy_Explanation: The GeoCover Stock Mosaics are within 50 meters root mean squared error overall. See EarthSat's http://www.geocover.com/ website for further details. Lineage: Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 30, Row(s) 27 and 28 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 30, Row(s) 27 and 28. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Multiple_Dates/Times: Single_Date/Time: Calendar_Date: 20050830 Single_Date/Time: Calendar_Date: 20050713 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 30, Row(s) 27 and 28 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 30, Row(s) 27 and 28. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20050713 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 31, Row(s) 26, 27 and 28 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 31, Row(s) 26, 27 and 28. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Multiple_Dates/Times: Single_Date/Time: Calendar_Date: 20050618 Single_Date/Time: Calendar_Date: 20050805 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 32, Row(s) 26, 27 and 28 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 32, Row(s) 26, 27 and 28. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Multiple_Dates/Times: Single_Date/Time: Calendar_Date: 20050422 Single_Date/Time: Calendar_Date: 20050828 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 33, Row(s) 26 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 33, Row(s) 26. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20050522 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 33, Row(s) 26 and 27 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 33, Row(s) 26 and 27. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Multiple_Dates/Times: Single_Date/Time: Calendar_Date: 20050718 Single_Date/Time: Calendar_Date: 20050920 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 33, Row(s) 27 and 28 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 33, Row(s) 27 and 28. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20050920 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 34, Row(s) 26 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 34, Row(s) 26. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20050522 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 34, Row(s) 27 and 28 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 34, Row(s) 27 and 28. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Multiple_Dates/Times: Single_Date/Time: Calendar_Date: 20050522 Single_Date/Time: Calendar_Date: 20050826 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: Landsat 5 Title: LANDSAT TM Path 35, Row(s) 26 Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: USGS EROS Data Center Publication_Place: Sioux Falls, South Dakota, USA Publication_Date: 20051001 Other_Citation_Details: LANDSAT TM Path 35, Row(s) 26. 30 meter by 30 meter pixel resolution, EOSAT Fast Format. Additional information about Landsat 5 and Landsat 7 satellite imagery can be obtained from the United States Geological Survey (USGS) EROS Data Center. Source_Scale_Denominator: 100000 Type_of_Source_Media: CD-ROM Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 20050902 Source_Currentness_Reference: ground condition Source_Contribution: Raw data used in land cover spectral signature analysis. Source_Information: Source_Citation: Citation_Information: Originator: National Aerial Photography Program (NAPP) Title: NAPP aerial photographs Geospatial_Data_Presentation_Form: remote-sensing image Publication_Information: Publisher: Aerial Photography Field Office (AFPO) Publication_Place: Salt Lake City, Utah, USA Publication_Date: variable Other_Citation_Details: Additional information about NAPP: EROS Data Center Sioux Falls, South Dakota 57198, USA Phone (605)594-6151 fax x6589 Source_Scale_Denominator: 8000 Type_of_Source_Media: paper Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: variable Source_Currentness_Reference: ground condition Source_Contribution: spatial and attribute information Source_Information: Source_Citation: Citation_Information: Originator: USDA/NASS, Research and Development Division, Area Frame Section Title: Area Sampling Frame (ASF) of North Dakota Geospatial_Data_Presentation_Form: vector digital data Publication_Information: Publisher: USDA-NASS Publication_Place: Washington D.C., USA Publication_Date: 1977 Other_Citation_Details: Additional information about the NASS Area Frame Stratification can be obtained from the following internet site: http://www.nass.usda.gov/research/stratafront2b.htm Source_Scale_Denominator: 100000 Type_of_Source_Media: online Source_Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1977 Source_Currentness_Reference: publication date Source_Contribution: spatial and attribute information Process_Step: Process_Description: The Cropland Data Layer (CDL) Program provides the National Agricultural Statistics Service (NASS) with internal proprietary county and state level acreage indications of major crop commodities, and secondarily provides the public with "statewide" (where available) raster, geo-referenced, categorized land cover data products after the public release of county estimates. This project builds upon the USDA's National Agricultural Statistics Service (NASS) traditional crop acreage estimation program, and integrates the enumerator collected ground survey data with satellite imagery to create an unbiased statistical estimator of crop area at the state and county level for internal use. No farmer reported data is revealed, nor can it be derived in the publicly releasable Cropland Data Layer product. Every June thousands of farms are visited by enumerators as part of the USDA/NASS June Agricultural Survey (JAS). These farmers are asked to report the acreage, by crop, that has been planted or that they intend to plant, and the acreage they expect to harvest. Approximately 11,000 area segments are selected nationwide for the JAS. The segment size can range in size from about 1 square mile in cultivated areas to 0.1 of a square mile in urban areas, to 2-4 square miles for larger probability proportional to size (PPS) segments in rangeland areas. This division allows intensively cultivated land segments to be selected with a greater frequency than those in less intensively cultivated areas. The 150-400 square miles of ground truth collected during the JAS provides a great ground truth training set annually. The Area Sampling Frame (ASF) is a stratification of each state into broad land use categories according to the percentage of cropland present. The ASF is stratified using visual interpretation of satellite imagery. The sampling frames are constructed by defining blocks of land whose boundaries are physical features on the ground (roads, railroads, rivers, etc). These blocks of land cover the entire state, do not overlap, and are placed in strata based on the percent of land in the block that is cultivated. The strata allow for efficient sampling of the land, as an agriculturally intensive area will be more heavily sampled than a non ag intensive area. The enumerators draw off field boundaries onto NAPP 1:8,000 black and white aerial photos containing the segment, according to their observations and the farmer reported information. The fields are labeled and the cover type is recorded using a grease pencil on the aerial photo. Enumerators account for every field/land use type within a segment. They assign each field a cover type based upon a fixed set of land use classes for each state. Every field within a segment must fit into one of the pre-defined classes. The program methodology is a continuous process throughout the year. The first step "Segment Preparation" establishes the training segments, digitizes the perimeters, and distributes software and data to the field offices, this goes from February to late May. Segment digitizing begins during the JAS and continues until all fields and all segments are completely digitized, this may run thru July or even until mid-October in some states depending on human resource availability. Segment cleanup analyzes the newly digitized segments with the new acquired imagery. Fields that are bad either by digitizing or cover type are corrected or removed from training. Scene processing fits each segment onto a scene by shifting, and cloud-influenced segments are removed. The cluster/classification process runs in concert with the scene processing steps, as segments are shifted they can be clustered. This process is iterative, and can run into December. Estimation can be performed once a scene is finished classification, and the user is satisfied with the outputs. Estimation can begin as early as late October and run into late January/February. The mosaic process runs once estimation is completed. It is also iterative and can go from late December to March. The mosaic for a particular state is released once the county estimates are officially released for that state. Scene selection begins in early summer, and could run into the late fall depending on image availability. The Cropland Data Layer program primarily uses the Landsat platform for acreage estimation. However, other platforms such as Spot and the Indian IRS platforms are used to fill "data acquisition" holes within a state. A spring and summer date of observation is preferred for maximum crop cover separation for multi-temporal analysis of summer crops. If only one date of observation is available (unitemporal), a mid summer date is preferred. If only an early spring date March-May or a fall date September-October is available (unitemporal) during the growing season, then it is best to not use that scene or analysis district for estimation, as bare soil in the spring and fully senesced crops in the fall will provide erroneous results. The clustering/classification is an iterative process, as fields get misclassified, they can be fixed or marked as bad for training and reprocessed. Known pixels are separated by cover type and clustered, within cover type using a modified ISODATA clustering algorithm, as it allows for merging and splitting of clusters. Modified implies that the output clusters are not labeled (other than as coming from the input cover type) as they can be reassigned later if desired. Clustering is done separately for each cover type (or specified combination of cover types, such as all small grains). The clustered cover types are then assembled together into one signature file, where entire scenes are classified using the maximum likelihood algorithm. Clustering is based on the LARSYS (Purdue University) ISODATA algorithm. It performs an iterative process to divide pixels into groups based on minimum variance. The pairs of clusters in close proximity (based on Swain-Fu distance) are merged. High variance clusters can be split into two clusters (variance of first principal component is used as a measure). The output of any clustering program is a statistics file which stores mean vectors and covariance matrices of final set of clusters. The outputs are a categorized or classified image in PEDITOR format and the associated accuracy statistics for each cover type. The maximum likelihood classifier performs a pixel-by-pixel classification based on the final, combined statistics file. It calculates the probability of each pixel being from each signature; then classifies a pixel to the category with highest probability. The processing time depends on size of file to be classified (i.e. number of pixels), number of categories in the statistics file and number of input dimensions (number of bands/pixel). For estimation purposes, clouds can be minimized by defining Analysis Districts (AD) along adjacent scene edges, by cutting the Analysis Districts by county boundary, or cutting the clouds out by primary sampling units. Analysis Districts can be individual or multiple scenes footprints that have to be observed on the same date, and analyzed as one. An AD can be comprised of one or more scenes. An AD can be defined by either a scene edge or a county boundary. Multi-temporal AD's are possible as long as both dates in all scenes are the same. A single or multi-scene AD will use all potential training fields for clustering/classification/estimation. Several factors can lead to problems in a classification, some get corrected in early edits and some do not: Several factors can lead to problems in a classification, some get corrected in early edits and some do not: poor imagery dates, with respect to the major crops of interest, complete training fields that are incorrectly identified in the ground truth, parts of training fields that are not the same as the major crop or cover type, irrigation ditches, wooded areas, low spots filled with water, and/or bare soil areas in an otherwise vegetated field. Crops that look alike to the clustering algorithm(s) due to planting/growing cycle: spring wheat and barley at almost any time, crops in senescence, and grassy waste fields and idle cropland. Cover types that are essentially the same but used differently: wooded pasture versus woods or waste fields (only difference may be the presence of livestock), corn for grain versus corn silage, and cover crops such as rye and oats. Cover types that change signatures back and forth during the growing season: alfalfa and other hays before and after cutting, with multiple cuttings per year. Once the analyst is satisfied with the classification, the next step can be acreage estimation or image mosaicking. Three estimation methods are available for each AD: regression, pixel ratio and direct expansion. Where available, regression is chosen as the preferred type of estimation. This approach essentially corrects the area sample (ground only) estimate based on the relationship found between reported data and classified pixels in each stratum where it is used. A regression relationship should be based on 10 or more segments for any stratum used. Where there are not enough segments in each stratum, a pixel based ratio estimator may be used which essentially combines data across stratum to get the relationship. Finally, the direct expansion (total number of possible segments times the average for sampled segment) may be used in the absence of pixel based methods. Regression adjusts the direct expansion estimate based on pixel information. It usually leads to an estimate with a much lower variance than direct expansion alone. Segments, called outliers, which do not fit the linear relationship estimated by the regression are reviewed; if errors are found, they are corrected or that segment may be removed from consideration in the analysis. Full scene classifications (large scale) are run wherever the regression or pixel ratio estimates are usable. Estimates derived from the classification are compared to the ground data to make one final check. State estimates are made by summing pixel based estimators where available and ground data only estimators everywhere else. County estimates are then derived from the state estimates using a similar approach. Final numbers are delivered to state field offices and the NASS Agricultural Statistics Board for their use in setting the official final estimates. The states also have administrative data, such as FSA certified acres at the county level, and other NASS survey data. Every 5th year, NASS also performs the Census of Agriculture at the county level. The Landsat TM/ETM+ scenes that SARS uses are radiometrically and systematically corrected. There is a need to tie down registration points on a continuing basis for every state in the project. Without some image/image registration, the scene registration tends to float 2-3 pixels in any given direction, for any given scene. Manual registration for every scene of every project, would be nearly impossible, as the CDL is on a repeating production cycle every year, and human resource levels for this process are low. Image recoding is necessary between different analysis districts, to rectify to a common signatures set for a state. Clouds pose a problem when trying to make acreage estimates, and there are mechanisms within Peditor to minimize their extent, as there are ways to minimize cloud coverage in the mosaic process by prioritizing scene overlap. Each categorized scene is co-registered to EarthSat's GeoCover LC imagery (50 meters RMS), and then stitched together using Peditor's Batch program. A block correlation is run between band two from each raw scene, and band two of the ortho-base image. The registration of the GeoCover mosaicked scene and the individual raw input scenes are used to get an approximate correspondence. A correlation procedure is used on the raw Landsat scenes and the mosaicked scene to get an exact mapping of each pixel from the input Landsat scenes to the mosaicked scene. The results of the correlation are used to remap the pixels from the individual input scenes into the coordinate system of the mosaicked scene. The mosaic process now performs: 1) Precision registration of images automatically, 2) Converts each categorized image and associated statistics file to a set standard automatically (recode), 3) Specify overlap priority by scene or county, 4) Filters out clouds when possible. The scenes are stitched together using the priorities previously assigned from the scene observation dates/analysis districts map. Scenes/analysis districts with better quality observation dates are assigned a higher priority when stitching the images together. Clouds are assigned a null value on all scenes, and scenes of lower priority that are cloud free, take precedence over clouded higher priority images. Once cloud cover is established throughout the mosaic the clouds are assigned a digital value. The Cropland Data Layer DVD/CD-ROM products contain one year of imagery in GEOTIFF image file format. In order to maximize the visual contrast between different crops in various states, colors that provide the best contrast for the crop mix in a particular State are chosen. However, the digital values for each category within every State remain the same. So corn in ND will have the same digital number as corn in AR. See mastercat.htm on the CDL CD-ROM or DVD in the statinfo directory for a full listing by cover type. All CDL distribution for the previous crop year is held until the release of the official NASS county estimates for the major commodities grown within a given state. Corn and Soybeans are released in March for the previous crop year - Midwestern States. Rice and Cotton are released in June for the previous crop year - Delta States. Small grains are released in March for the Great Plains States. NASS publishes all available accuracy statistics for end-user viewing. The Percent Correct is calculated for each cover type in the ground truth, it shows how many of the total pixels were correctly classified (i.e. across all cover types). 'Commission Error' is the calculated percentage of all pixels categorized to a specific cover type that were not of that cover type in the ground truth (i.e. incorrectly categorized). CAUTION: a quoted Percent Correct for a specific cover type is worthless unless accompanied by its respective Commission Error. Example: if you classify every pixel in a scene to 'wheat', then you have a 100% correct wheat classifier (however its Commission Error is also almost 100%). The 'Kappa Statistic' is an attempt to adjust the Percent Correct using information gained from the confusion matrix for that cover type. Many remote sensing groups use the Percent Correct and/or Kappa statistics as their final measure of classification accuracy. The NASS CDL Program is continuing efforts to reduce end-user burden, increase functionality, and take advantage of enhancements in computer technology. The Cropland Data Layer Program is a one of a kind agricultural inventory program, where every state participating in the program is re-surveyed (i.e., ground truthed) every June, and thus re-categorized. The data on the CD-ROM or DVD is in the public domain, and you are free to do with it as you choose. NASS would appreciate acknowledgment or credit regarding the source of the categorized images in any uses that you may have. Remember, in no case is farmer reported data revealed or derivable from the public use Cropland Data Layer. Process_Date: 20060215 Process_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USDA/NASS/RDD/SARS Contact_Person: USDA-NASS Remote Sensing Analyst for North Dakota Contact_Address: Address_Type: mailing address Address: 3251 Old Lee Highway, Rm 305 City: Fairfax State_or_Province: Virginia Postal_Code: 22030-1504 Country: USA Contact_Voice_Telephone: 703/877-8000 Contact_Facsimile_Telephone: 703/877-8044 Contact_Electronic_Mail_Address: HQ_RD_OD@nass.usda.gov Cloud_Cover: Reference the CD-Rom or DVD for cloud coverage information. Spatial_Data_Organization_Information: Indirect_Spatial_Reference: North Dakota Direct_Spatial_Reference_Method: Raster Raster_Object_Information: Raster_Object_Type: Pixel Row_Count: 11754 Column_Count: 19340 Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Planar: Grid_Coordinate_System: Grid_Coordinate_System_Name: Universal Transverse Mercator Universal_Transverse_Mercator: UTM_Zone_Number: 14 Transverse_Mercator: Scale_Factor_at_Central_Meridian: 0.9996 Longitude_of_Central_Meridian: -99 Latitude_of_Projection_Origin: 0 False_Easting: 500000 False_Northing: 0 Planar_Coordinate_Information: Planar_Coordinate_Encoding_Method: row and column Coordinate_Representation: Abscissa_Resolution: 30 Ordinate_Resolution: 30 Planar_Distance_Units: meters Geodetic_Model: Horizontal_Datum_Name: WGS84 Ellipsoid_Name: WGS84 Semi-major_Axis: 6378137.00 Denominator_of_Flattening_Ratio: 298.257223563 Entity_and_Attribute_Information: Overview_Description: Entity_and_Attribute_Overview: NASS collects the remote sensing Acreage Estimation Program's field level training data during the June Agricultural Survey. This is a national survey based on a stratified random sample of land areas selected from each state's area frame. An area frame is a land use stratification based on percent cultivation. The selected areas are targeted toward cultivated parts of each state based on its area frame. Our enumerators are given questionnaires to ask the farmers what, where, when and how much are they planting. Our surveys focus on cropland, but the enumerators record all land covers within the sampled area of land whether it is cropland or not. NASS uses broad land use categories to define land that is not under cultivation, including; non-agricultural, pasture/rangeland, waste, woods, and farmstead. NASS defines these non-agricultural land use types very broadly, which makes it difficult to precisely know what specific type of land use/cover actually is on the ground. For instance, there is no breakdown as to the type of woods in a given field/pasture, that's where the power of a GIS could be useful. If an external forestry GIS layer was overlaid, the land use can be accurately identified, and the specific cover type can be derived from the data layer. SARS is currently looking at creating extra categories for the enumerators to better identify non-cropland features, thereby, increasing the accuracy and improving the appearance of the classification. Entity_and_Attribute_Detail_Citation: Data Dictionary: USDA - NATIONAL AGRICULTURE STATISTICS SERVICE'S 1:100,000-SCALE 2005 CROPLAND DATA LAYER, A Crop-Specific Digital Data Layer for North Dakota, 2006 March 14 > > Source: USDA - National Agriculture Statistics Service > > The following is a cross reference list of the categorization codes and > land covers used in all states. Note that not all land cover > categories listed below will appear in an individual state. Refer > to the "Cover Type Signatures List" on the CD-ROM or DVD for the state specific > assignment of colors to cover type. > > Raster > Attribute Domain Values and Definitions: ROW CROPS 1-20 > > Categorization Code Land Cover > "1" Corn > "2" Cotton > "3" Rice > "4" Sorghum > "5" Soybeans > "6" Sunflowers > "10" Peanuts > "11" Tobacco > > Raster > Attribute Domain Values and Definitions: SMALL GRAINS, HAY AND SEEDS 21-40 > > Categorization Code Land Cover > "21" Barley > "22" Durum Wheat > "23" Spring Wheat > "24" Winter Wheat (AR,IL,MS,NM) > "25" Other Small Grains & Hay (Oats, Millet, Rye > & Winter Wheat, Alfalfa & Other Hay) > "26" Winter Wheat/Soybeans Double Cropped > "27" Rye > "28" Oats > "29" Millet > "30" Speltz > "31" Canola > "32" Flaxseed > "33" Safflower > "34" Rapeseed > "35" Mustard > "36" Alfalfa > > Raster > Attribute Domain Values and Definitions: OTHER CROPS 41-60 > > Categorization Code Land Cover > "41" Beets > "42" Dry Edible Beans > "43" Potatoes > "44" Other Crops (Canola, Flaxseed, Safflower > & very small acreage crops) > "45" Sugar Cane > "46" Sweet Potatoes > "47" Misc. Fruit and Veg > "48" Watermelon > "50" State 560 (State-specific crop, see CD or DVD for details) > "51" State 561 (State-specific crop, see CD or DVD for details) > "52" State 562 (State-specific crop, see CD or DVD for details) > "53" State 563 (State-specific crop, see CD or DVD for details) > "54" State 564 (State-specific crop, see CD or DVD for details) > "55" State 565 (State-specific crop, see CD or DVD for details) > "56" State 566 (State-specific crop, see CD or DVD for details) > "57" State 567 (State-specific crop, see CD or DVD for details) > "58" State 568 (State-specific crop, see CD or DVD for details) > "59" State 569 (State-specific crop, see CD or DVD for details) > > Raster > Attribute Domain Values and Definitions: FARMLAND USES 61-65 > > Categorization Code Land Cover > "61" Fallow/Idle Cropland > "62" Pasture/Range/CRP/Non Ag (Permanent & > Cropland Pasture, Waste & Farmstead) > "63" Woods, Woodland Pasture > > Raster > Attribute Domain Values and Definitions: TREE CROPS 66-80 > > Categorization Code Land Cover > "67" Peaches > "68" Apples > "69" Grapes > "70" Christmas Trees > "71" Orchards, State 721-729 (State-specific orchards, > see CD-ROM or DVD for details),Cottonwood Tree > "80" Other Fruit > > Raster > Attribute Domain Values and Definitions: OTHER LAND 81-99 > > Categorization Code Land Cover > "81" Clouds > "82" Urban > "83" Water > "84" Roads/Railroads > "85" Ditches/Waterways > "86" Buildings/Homes/Subdivisions > "87" Wetlands > "88" Grassland > "90" Mixed Water/Crops > "91" Mixed Water/Clouds > "92" Aquaculture > > Raster > Attribute Domain Values and Definitions: OTHER CROPS 100-120 > > Categorization Code Land Cover > "100" Pickles > "101" Chick Peas > "102" Lentils > "103" Peas > Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: USDA/NASS Customer Service Contact_Person: USDA/NASS Customer Service Contact_Address: Address_Type: mailing address Address: 1400 Independence Avenue, SW, Room 5038-S City: State_or_Province: Washington DC Postal_Code: 20250-9410 Country: USA Contact_Voice_Telephone: 1-800-727-9540 Contact_Facsimile_Telephone: 703/877-8044 Contact_Instructions: To order a CD-ROM or DVD (see prices as noted at http://www.nass.usda.gov/research/Cropland/SARS1a.htm) please fill out the order form and submit it either electronically (invoice will follow with the delivery) or mail the completed form with your check to: USDA/NASS Customer Service, 1400 Independence Avenue, SW, Room 5829-S, Washington DC 20250-9410. Please note "Cropland Data Layer - (State and Year)" in the "Memo" part of your check. Checks should be made out to "USDA-NASS". Allow 1 week for delivery. Resource_Description: NASS Cropland Data Layer, North Dakota 2005 Distribution_Liability: Disclaimer: Users of our Cropland Data Layer (CDL) and associated raster and vector data files are solely responsible for interpretations made from these products. The CDL is provided "as is". USDA-NASS does not warrant results you may obtain by using the Cropland Data Layer. Feel free to contact our staff at (HQ_RD_OD@nass.usda.gov) if technical questions arise in the use of our Cropland Data Layer. NASS does provide considerable metadata and substantial statistical performance measures in the Frequently Asked Questions (FAQ's) section on the CDL website and on the CD-ROM and/or DVD. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: GEOTIFF Format_Version_Date: 2005 Format_Information_Content: GEOTIFF Transfer_Size: The image file size will vary depending on the state and completeness of coverage. Generally, the North Dakota GEOTIFF image file is approximately 222 megabites and may be zipped depending on the available disk space. Digital_Transfer_Option: Offline_Option: Offline_Media: CD-ROM or DVD Recording_Capacity: Recording_Density: Uncompressed file size for the North Dakota Cropland Data Layer is approximately 222 MB. Recording_Density_Units: MB Recording_Format: DOS-COPY Fees: The USDA-NASS charges a nominal fee to cover the cost of CD-ROM and DVD production and shipping costs. Please visit http://www.nass.usda.gov/research/Cropland/SARS1a.htm for prices. Distribution issues can also be directed to the NASS Customer Service Hotline at 1-800-727-9540. Ordering_Instructions: To order a CD-ROM or DVD (see prices as noted at http://www.nass.usda.gov/research/Cropland/SARS1a.htm) please fill out the order form and submit it either electronically (invoice will follow with the delivery) or mail the completed form with your check to: USDA-NASS Customer Service, 1400 Independence Avenue, SW, Room 5829-S, Washington DC 20250-9410. Please note "Cropland Data Layer - (State and Year)" in the "Memo" part of your check. Checks should be made out to "USDA-NASS". Allow 1 week for delivery. Distribution issues can also be directed to the NASS Customer Service Hotline at 1-800-727-9540. Turnaround: Allow 1 week for delivery. Custom_Order_Process: For a list of other states and years of data please visit: http://www.nass.usda.gov/research/Cropland/SARS1a.htm. Distribution issues can also be directed to the NASS Customer Service Hotline at 1-800-727-9540. Technical_Prerequisites: There are no technical prerequisites requiring special software or hardware to view the data. A freeware browser, ArcReader (Environmental Systems Research Institute, Redlands, CA), is bundled onto the CD-ROM or DVD, allowing for users without a GIS or image processing software package to be able to view the products. Available_Time_Period: Time_Period_Information: Range_of_Dates/Times: Beginning_Date: 20060314 Ending_Date: Unknown Metadata_Reference_Information: Metadata_Date: 20060314 Metadata_Review_Date: None planned Metadata_Future_Review_Date: None planned Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USDA-NASS Spatial Analysis Research Section Contact_Person: Patrick Willis Contact_Address: Address_Type: mailing address Address: 3251 Old Lee Highway, Rm 305 City: Fairfax State_or_Province: Virginia Postal_Code: 22030-1504 Country: USA Contact_Voice_Telephone: 703/877-8000 Contact_Facsimile_Telephone: 703/877-8044 Contact_Electronic_Mail_Address: HQ_RD_OD@nass.usda.gov Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata. Metadata_Standard_Version: FGDC-STD-001-1998 Metadata_Access_Constraints: No restrictions on the distribution or use of the metadata file. Metadata_Use_Constraints: No restrictions on the distribution or use of the metadata file.