! Started logfile: J0339-0146_S_2006_02_23_yyk_uvs.log on Wed Jul 5 11:17:21 2006 obs J0339-0146_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J0339-0146_S_2006_02_23_yyk_uva.fits ! AN table 1: 140 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.98746 visibilities/baseline/integration-bin. ! Found source: J0339-0146 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2426 lines of history. ! ! Reading 24884 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0339-0146_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 2.14139 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.46 mas, bmaj=6.633 mas, bpa=-1.968 degrees ! Estimated noise=2.22552 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.70074 Jy ! Component: 100 - total flux cleaned = 2.17087 Jy ! Total flux subtracted in 100 components = 2.17087 Jy ! Clean residual min=-0.071285 max=0.141643 Jy/beam ! Clean residual mean=-0.000355 rms=0.024483 Jy/beam ! Combined flux in latest and established models = 2.17087 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.17087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.389619Jy sigma=5.183217 ! Fit after self-cal, rms=0.389010Jy sigma=5.178249 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.128 mas, bmaj=7.788 mas, bpa=-2.528 degrees ! Estimated noise=1.74204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.213137 Jy ! Component: 100 - total flux cleaned = 0.288208 Jy ! Component: 150 - total flux cleaned = 0.318543 Jy ! Component: 200 - total flux cleaned = 0.332026 Jy ! Total flux subtracted in 200 components = 0.332026 Jy ! Clean residual min=-0.042130 max=0.060122 Jy/beam ! Clean residual mean=-0.000876 rms=0.011911 Jy/beam ! Combined flux in latest and established models = 2.50289 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 33 model components to the UV plane model. ! The established model now contains 38 components and 2.50289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286449Jy sigma=3.726416 ! Fit after self-cal, rms=0.285888Jy sigma=3.725056 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.128 x 7.788 at -2.528 degrees (North through East) ! Clean map min=-0.041311 max=2.0247 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01507 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 0.98 KP 0.95 ! LA 1.21 MK 0.91 NL 0.93 OV 0.98 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.992515 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.00 KP 0.97 ! LA 1.17 MK 0.99 NL 0.96 OV 1.00 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.965151 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 1.04 KP 0.98 ! LA 0.94 MK 1.13 NL 1.05 OV 1.04 ! PT 1.08 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03364 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.97 KP 0.90 ! LA 0.80 MK 1.11 NL 0.98 OV 0.86 ! PT 0.96 SC 1.11 ! ! ! Fit before self-cal, rms=0.285888Jy sigma=3.725056 ! Fit after self-cal, rms=0.168549Jy sigma=2.032665 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168549Jy sigma=2.032665 ! Fit after self-cal, rms=0.168546Jy sigma=2.032625 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.186 mas, bmaj=7.883 mas, bpa=-2.248 degrees ! Estimated noise=1.74094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19.5, 11). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156015 Jy ! Component: 100 - total flux cleaned = 0.0168222 Jy ! Component: 150 - total flux cleaned = 0.0175057 Jy ! Component: 200 - total flux cleaned = 0.0175019 Jy ! Total flux subtracted in 200 components = 0.0175019 Jy ! Clean residual min=-0.010038 max=0.011829 Jy/beam ! Clean residual mean=-0.000014 rms=0.002806 Jy/beam ! Combined flux in latest and established models = 2.5204 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 24 model components to the UV plane model. ! The established model now contains 62 components and 2.5204 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166334Jy sigma=1.996574 ! Fit after self-cal, rms=0.165876Jy sigma=1.994981 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165876Jy sigma=1.994981 ! Fit after self-cal, rms=0.159051Jy sigma=1.931931 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.37291e-05 Jy ! Component: 100 - total flux cleaned = 8.91391e-05 Jy ! Component: 150 - total flux cleaned = -0.000101054 Jy ! Component: 200 - total flux cleaned = -0.000463449 Jy ! Total flux subtracted in 200 components = -0.000463449 Jy ! Clean residual min=-0.009345 max=0.011026 Jy/beam ! Clean residual mean=-0.000010 rms=0.002615 Jy/beam ! Combined flux in latest and established models = 2.51993 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 23 model components to the UV plane model. ! The established model now contains 74 components and 2.51993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158607Jy sigma=1.924770 ! Fit after self-cal, rms=0.156811Jy sigma=1.915900 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.186 x 7.883 at -2.248 degrees (North through East) ! Clean map min=-0.0088775 max=2.0387 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156811Jy sigma=1.915900 ! Fit after self-cal, rms=0.113091Jy sigma=1.004314 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113091Jy sigma=1.004314 ! Fit after self-cal, rms=0.112528Jy sigma=1.001366 ! Inverting map and beam ! Estimated beam: bmin=3.189 mas, bmaj=7.885 mas, bpa=-2.311 degrees ! Estimated noise=1.73858 mJy/beam. ! Added new window around map position (5, -51.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045476 Jy ! Component: 100 - total flux cleaned = 0.00480865 Jy ! Component: 150 - total flux cleaned = 0.00479768 Jy ! Component: 200 - total flux cleaned = 0.00421509 Jy ! Total flux subtracted in 200 components = 0.00421509 Jy ! Clean residual min=-0.007140 max=0.008276 Jy/beam ! Clean residual mean=-0.000004 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 2.52415 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 99 components and 2.52415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111121Jy sigma=0.973044 ! Fit after self-cal, rms=0.110913Jy sigma=0.971509 ! Inverting map ! Added new window around map position (6.5, -6). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00894564 Jy ! Component: 100 - total flux cleaned = 0.0098472 Jy ! Component: 150 - total flux cleaned = 0.00965669 Jy ! Component: 200 - total flux cleaned = 0.00998665 Jy ! Total flux subtracted in 200 components = 0.00998665 Jy ! Clean residual min=-0.005654 max=0.004915 Jy/beam ! Clean residual mean=-0.000019 rms=0.001485 Jy/beam ! Combined flux in latest and established models = 2.53413 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 121 components and 2.53413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109784Jy sigma=0.952390 ! Fit after self-cal, rms=0.109605Jy sigma=0.951497 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109605Jy sigma=0.951497 ! Fit after self-cal, rms=0.107981Jy sigma=0.934808 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107981Jy sigma=0.934808 ! Fit after self-cal, rms=0.107940Jy sigma=0.934733 ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.879 mas, bpa=-2.356 degrees ! Estimated noise=1.73739 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00269826 Jy ! Component: 100 - total flux cleaned = 0.00285694 Jy ! Component: 150 - total flux cleaned = 0.00273715 Jy ! Component: 200 - total flux cleaned = 0.00227401 Jy ! Total flux subtracted in 200 components = 0.00227401 Jy ! Clean residual min=-0.004946 max=0.004746 Jy/beam ! Clean residual mean=-0.000009 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 2.53641 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 135 components and 2.53641 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107562Jy sigma=0.928273 ! Fit after self-cal, rms=0.107511Jy sigma=0.928054 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.838 mas, bmaj=12.72 mas, bpa=-0.7863 degrees ! Estimated noise=2.21253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00334629 Jy ! Component: 100 - total flux cleaned = -0.00410697 Jy ! Component: 150 - total flux cleaned = -0.00449811 Jy ! Component: 200 - total flux cleaned = -0.00456564 Jy ! Total flux subtracted in 200 components = -0.00456564 Jy ! Clean residual min=-0.005902 max=0.005062 Jy/beam ! Clean residual mean=0.000001 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 2.53184 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 28 model components to the UV plane model. ! The established model now contains 157 components and 2.53184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107351Jy sigma=0.927757 ! Fit after self-cal, rms=0.107329Jy sigma=0.927479 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.491 mas, bmaj=6.684 mas, bpa=-1.888 degrees ! Estimated noise=2.22059 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 1.68735 Jy ! Component: 100 - total flux cleaned = 2.14109 Jy ! Component: 150 - total flux cleaned = 2.32391 Jy ! Component: 200 - total flux cleaned = 2.40691 Jy ! Total flux subtracted in 200 components = 2.40691 Jy ! Clean residual min=-0.021512 max=0.029236 Jy/beam ! Clean residual mean=0.000036 rms=0.006124 Jy/beam ! Combined flux in latest and established models = 2.40691 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 2.40691 Jy ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.879 mas, bpa=-2.356 degrees ! Estimated noise=1.73739 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0591325 Jy ! Component: 100 - total flux cleaned = 0.0855226 Jy ! Component: 150 - total flux cleaned = 0.100471 Jy ! Component: 200 - total flux cleaned = 0.106184 Jy ! Total flux subtracted in 200 components = 0.106184 Jy ! Clean residual min=-0.007672 max=0.007390 Jy/beam ! Clean residual mean=0.000028 rms=0.002076 Jy/beam ! Combined flux in latest and established models = 2.51309 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 74 components and 2.51309 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.838 mas, bmaj=12.72 mas, bpa=-0.7863 degrees ! Estimated noise=2.21253 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00613319 Jy ! Component: 100 - total flux cleaned = 0.00875677 Jy ! Component: 150 - total flux cleaned = 0.0113134 Jy ! Component: 200 - total flux cleaned = 0.0130973 Jy ! Total flux subtracted in 200 components = 0.0130973 Jy ! Clean residual min=-0.006278 max=0.005218 Jy/beam ! Clean residual mean=0.000025 rms=0.001597 Jy/beam ! Combined flux in latest and established models = 2.52619 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 114 components and 2.52619 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.879 mas, bpa=-2.356 degrees ! Estimated noise=1.73739 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00144808 Jy ! Component: 100 - total flux cleaned = 0.00284468 Jy ! Component: 150 - total flux cleaned = 0.00384015 Jy ! Component: 200 - total flux cleaned = 0.00434007 Jy ! Total flux subtracted in 200 components = 0.00434007 Jy ! Clean residual min=-0.005072 max=0.004999 Jy/beam ! Clean residual mean=0.000002 rms=0.001391 Jy/beam ! Combined flux in latest and established models = 2.53053 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 31 model components to the UV plane model. ! The established model now contains 142 components and 2.53053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107991Jy sigma=0.933020 ! Fit after self-cal, rms=0.107876Jy sigma=0.930987 wmodel J0339-0146_S_2006_02_23_yyk\_map.mod ! Writing 142 model components to file: J0339-0146_S_2006_02_23_yyk_map.mod wobs J0339-0146_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J0339-0146_S_2006_02_23_yyk_uvs.fits wwins J0339-0146_S_2006_02_23_yyk\_map.win ! wwins: Wrote 4 windows to J0339-0146_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 2.6425e-05 Jy ! Component: 100 - total flux cleaned = -0.000804945 Jy ! Component: 150 - total flux cleaned = -0.000963817 Jy ! Component: 200 - total flux cleaned = -0.0011166 Jy ! Component: 250 - total flux cleaned = -0.00118774 Jy ! Component: 300 - total flux cleaned = -0.00125492 Jy ! Component: 350 - total flux cleaned = -0.00125263 Jy ! Component: 400 - total flux cleaned = -0.00131624 Jy ! Component: 450 - total flux cleaned = -0.00143896 Jy ! Component: 500 - total flux cleaned = -0.00167558 Jy ! Component: 550 - total flux cleaned = -0.00190408 Jy ! Component: 600 - total flux cleaned = -0.0021264 Jy ! Component: 650 - total flux cleaned = -0.00218114 Jy ! Component: 700 - total flux cleaned = -0.00212903 Jy ! Component: 750 - total flux cleaned = -0.00207804 Jy ! Component: 800 - total flux cleaned = -0.00202699 Jy ! Component: 850 - total flux cleaned = -0.00202672 Jy ! Component: 900 - total flux cleaned = -0.00193063 Jy ! Component: 950 - total flux cleaned = -0.00202482 Jy ! Component: 1000 - total flux cleaned = -0.00197783 Jy ! Component: 1050 - total flux cleaned = -0.00188666 Jy ! Component: 1100 - total flux cleaned = -0.00197442 Jy ! Component: 1150 - total flux cleaned = -0.00179996 Jy ! Component: 1200 - total flux cleaned = -0.00175815 Jy ! Component: 1250 - total flux cleaned = -0.00175966 Jy ! Component: 1300 - total flux cleaned = -0.00171934 Jy ! Component: 1350 - total flux cleaned = -0.00184201 Jy ! Component: 1400 - total flux cleaned = -0.00184159 Jy ! Component: 1450 - total flux cleaned = -0.00191991 Jy ! Component: 1500 - total flux cleaned = -0.001919 Jy ! Component: 1550 - total flux cleaned = -0.00191881 Jy ! Component: 1600 - total flux cleaned = -0.00188068 Jy ! Component: 1650 - total flux cleaned = -0.00184322 Jy ! Component: 1700 - total flux cleaned = -0.00176987 Jy ! Component: 1750 - total flux cleaned = -0.00166136 Jy ! Component: 1800 - total flux cleaned = -0.00166104 Jy ! Component: 1850 - total flux cleaned = -0.00162438 Jy ! Component: 1900 - total flux cleaned = -0.00148517 Jy ! Component: 1950 - total flux cleaned = -0.00148548 Jy ! Component: 2000 - total flux cleaned = -0.00145235 Jy ! Total flux subtracted in 2048 components = -0.00135166 Jy ! Clean residual min=-0.001800 max=0.002432 Jy/beam ! Clean residual mean=0.000007 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 2.52918 Jy keep ! Adding 131 model components to the UV plane model. ! The established model now contains 273 components and 2.52918 Jy ![Exited script file: muppet] wmap "J0339-0146_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 7.879 at -2.356 degrees (North through East) ! Clean map min=-0.0038536 max=2.0355 Jy/beam ! Writing clean map to FITS file: J0339-0146_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.03549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000646665 device "J0339-0146_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J0339-0146_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0953083 0.0953083 0.190617 0.381233 0.762466 1.52493 3.04987 6.09973 12.1995 24.3989 48.7978 97.5957 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(peak_flux*1000)/1000 ! peak= 2.035 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.185 x 7.879 at -2.356 degrees (North through East) ! Clean map min=-0.0038536 max=2.0355 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0339-0146_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J0339-0146_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0339-0146_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 11:17:47 2006