! Started logfile: J1223+8040_S_2006_02_23_yyk_uvs.log on Wed Jul 5 12:14:15 2006 obs J1223+8040_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J1223+8040_S_2006_02_23_yyk_uva.fits ! AN table 1: 865 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.998998 visibilities/baseline/integration-bin. ! Found source: J1223+8040 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 155544 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J1223+8040_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.288686 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.369 mas, bmaj=10.65 mas, bpa=5.695 degrees ! Estimated noise=1.31314 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.222277 Jy ! Component: 100 - total flux cleaned = 0.278239 Jy ! Total flux subtracted in 100 components = 0.278239 Jy ! Clean residual min=-0.013420 max=0.020460 Jy/beam ! Clean residual mean=0.000108 rms=0.004417 Jy/beam ! Combined flux in latest and established models = 0.278239 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.278239 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089132Jy sigma=1.536284 ! Fit after self-cal, rms=0.088780Jy sigma=1.526243 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.143 mas, bmaj=10.76 mas, bpa=5.487 degrees ! Estimated noise=0.695769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0337032 Jy ! Component: 100 - total flux cleaned = 0.0515094 Jy ! Component: 150 - total flux cleaned = 0.0618746 Jy ! Component: 200 - total flux cleaned = 0.0681401 Jy ! Total flux subtracted in 200 components = 0.0681401 Jy ! Clean residual min=-0.008776 max=0.011800 Jy/beam ! Clean residual mean=-0.000146 rms=0.002722 Jy/beam ! Combined flux in latest and established models = 0.346379 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 47 components and 0.346379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077626Jy sigma=1.319538 ! Fit after self-cal, rms=0.077536Jy sigma=1.316379 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.143 x 10.76 at 5.487 degrees (North through East) ! Clean map min=-0.0081926 max=0.26518 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.01208 ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 0.95 KP 0.91 ! LA 1.16 MK 0.87 NL 0.91 OV 1.01 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.992612 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.04 HN 1.00 KP 0.93 ! LA 1.12 MK 0.94 NL 0.97 OV 1.04 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.975779 ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.03 HN 1.02 KP 0.93 ! LA 0.89 MK 1.06 NL 1.01 OV 1.07 ! PT 1.01 SC 1.14 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03546 ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.94 KP 0.88 ! LA 0.76 MK 1.10 NL 0.95 OV 0.92 ! PT 0.93 SC 1.18 ! ! ! Fit before self-cal, rms=0.077536Jy sigma=1.316379 ! Fit after self-cal, rms=0.070492Jy sigma=1.193095 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070492Jy sigma=1.193095 ! Fit after self-cal, rms=0.070568Jy sigma=1.193814 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=10.71 mas, bpa=5.284 degrees ! Estimated noise=0.692603 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 18). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0130032 Jy ! Component: 100 - total flux cleaned = 0.018468 Jy ! Component: 150 - total flux cleaned = 0.0212835 Jy ! Component: 200 - total flux cleaned = 0.023435 Jy ! Total flux subtracted in 200 components = 0.023435 Jy ! Clean residual min=-0.003462 max=0.004016 Jy/beam ! Clean residual mean=-0.000016 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.369814 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 34 model components to the UV plane model. ! The established model now contains 78 components and 0.369814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068682Jy sigma=1.154577 ! Fit after self-cal, rms=0.068729Jy sigma=1.154266 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068729Jy sigma=1.154266 ! Fit after self-cal, rms=0.057260Jy sigma=1.000470 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0014174 Jy ! Component: 100 - total flux cleaned = 0.00307018 Jy ! Component: 150 - total flux cleaned = 0.00421947 Jy ! Component: 200 - total flux cleaned = 0.00463194 Jy ! Total flux subtracted in 200 components = 0.00463194 Jy ! Clean residual min=-0.003271 max=0.003215 Jy/beam ! Clean residual mean=-0.000016 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.374446 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 50 model components to the UV plane model. ! The established model now contains 117 components and 0.374446 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056830Jy sigma=0.993952 ! Fit after self-cal, rms=0.056699Jy sigma=0.991398 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.22 x 10.71 at 5.284 degrees (North through East) ! Clean map min=-0.0032192 max=0.26901 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056699Jy sigma=0.991398 ! Fit after self-cal, rms=0.054042Jy sigma=0.959451 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054042Jy sigma=0.959451 ! Fit after self-cal, rms=0.054031Jy sigma=0.959277 ! Inverting map and beam ! Estimated beam: bmin=3.207 mas, bmaj=10.73 mas, bpa=5.085 degrees ! Estimated noise=0.690196 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00185535 Jy ! Component: 100 - total flux cleaned = 0.00252093 Jy ! Component: 150 - total flux cleaned = 0.00285969 Jy ! Component: 200 - total flux cleaned = 0.00321027 Jy ! Total flux subtracted in 200 components = 0.00321027 Jy ! Clean residual min=-0.002812 max=0.002450 Jy/beam ! Clean residual mean=-0.000015 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.377656 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 35 model components to the UV plane model. ! The established model now contains 140 components and 0.377656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053870Jy sigma=0.955909 ! Fit after self-cal, rms=0.053857Jy sigma=0.955672 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053857Jy sigma=0.955672 ! Fit after self-cal, rms=0.052494Jy sigma=0.928299 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052494Jy sigma=0.928299 ! Fit after self-cal, rms=0.052495Jy sigma=0.928276 ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=10.73 mas, bpa=5.017 degrees ! Estimated noise=0.690466 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134448 Jy ! Component: 100 - total flux cleaned = 0.00179654 Jy ! Component: 150 - total flux cleaned = 0.00208913 Jy ! Component: 200 - total flux cleaned = 0.00222101 Jy ! Total flux subtracted in 200 components = 0.00222101 Jy ! Clean residual min=-0.002607 max=0.002334 Jy/beam ! Clean residual mean=-0.000016 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.379877 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 161 components and 0.379877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052419Jy sigma=0.926617 ! Fit after self-cal, rms=0.052413Jy sigma=0.926504 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.42 mas, bmaj=11.97 mas, bpa=3.752 degrees ! Estimated noise=0.866487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151794 Jy ! Component: 100 - total flux cleaned = 0.00178747 Jy ! Component: 150 - total flux cleaned = 0.00179045 Jy ! Component: 200 - total flux cleaned = 0.00172347 Jy ! Total flux subtracted in 200 components = 0.00172347 Jy ! Clean residual min=-0.002875 max=0.002555 Jy/beam ! Clean residual mean=-0.000027 rms=0.000848 Jy/beam ! Combined flux in latest and established models = 0.3816 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 27 model components to the UV plane model. ! The established model now contains 182 components and 0.3816 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052491Jy sigma=0.927276 ! Fit after self-cal, rms=0.052483Jy sigma=0.927195 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.384 mas, bmaj=10.65 mas, bpa=5.53 degrees ! Estimated noise=1.29672 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.221831 Jy ! Component: 100 - total flux cleaned = 0.276226 Jy ! Component: 150 - total flux cleaned = 0.302072 Jy ! Component: 200 - total flux cleaned = 0.318006 Jy ! Total flux subtracted in 200 components = 0.318006 Jy ! Clean residual min=-0.005968 max=0.007015 Jy/beam ! Clean residual mean=0.000064 rms=0.001915 Jy/beam ! Combined flux in latest and established models = 0.318006 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.318006 Jy ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=10.73 mas, bpa=5.017 degrees ! Estimated noise=0.690466 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166473 Jy ! Component: 100 - total flux cleaned = 0.0278054 Jy ! Component: 150 - total flux cleaned = 0.0358984 Jy ! Component: 200 - total flux cleaned = 0.0419995 Jy ! Total flux subtracted in 200 components = 0.0419995 Jy ! Clean residual min=-0.003563 max=0.003623 Jy/beam ! Clean residual mean=-0.000010 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.360005 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 120 components and 0.360005 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.42 mas, bmaj=11.97 mas, bpa=3.752 degrees ! Estimated noise=0.866487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00773994 Jy ! Component: 100 - total flux cleaned = 0.0124925 Jy ! Component: 150 - total flux cleaned = 0.0156334 Jy ! Component: 200 - total flux cleaned = 0.017732 Jy ! Total flux subtracted in 200 components = 0.017732 Jy ! Clean residual min=-0.003087 max=0.002388 Jy/beam ! Clean residual mean=-0.000026 rms=0.000878 Jy/beam ! Combined flux in latest and established models = 0.377737 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 189 components and 0.377737 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=10.73 mas, bpa=5.017 degrees ! Estimated noise=0.690466 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105513 Jy ! Component: 100 - total flux cleaned = 0.00167599 Jy ! Component: 150 - total flux cleaned = 0.00209679 Jy ! Component: 200 - total flux cleaned = 0.00239904 Jy ! Total flux subtracted in 200 components = 0.00239904 Jy ! Clean residual min=-0.002548 max=0.002307 Jy/beam ! Clean residual mean=-0.000014 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.380136 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 230 components and 0.380136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.052378Jy sigma=0.925395 ! Fit after self-cal, rms=0.052367Jy sigma=0.925263 wmodel J1223+8040_S_2006_02_23_yyk\_map.mod ! Writing 230 model components to file: J1223+8040_S_2006_02_23_yyk_map.mod wobs J1223+8040_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J1223+8040_S_2006_02_23_yyk_uvs.fits wwins J1223+8040_S_2006_02_23_yyk\_map.win ! wwins: Wrote 2 windows to J1223+8040_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000984997 Jy ! Component: 100 - total flux cleaned = -0.00164873 Jy ! Component: 150 - total flux cleaned = -0.00229801 Jy ! Component: 200 - total flux cleaned = -0.00275942 Jy ! Component: 250 - total flux cleaned = -0.00312801 Jy ! Component: 300 - total flux cleaned = -0.00331996 Jy ! Component: 350 - total flux cleaned = -0.00353535 Jy ! Component: 400 - total flux cleaned = -0.00371181 Jy ! Component: 450 - total flux cleaned = -0.00379653 Jy ! Component: 500 - total flux cleaned = -0.0038245 Jy ! Component: 550 - total flux cleaned = -0.00390408 Jy ! Component: 600 - total flux cleaned = -0.00390486 Jy ! Component: 650 - total flux cleaned = -0.00398083 Jy ! Component: 700 - total flux cleaned = -0.00407755 Jy ! Component: 750 - total flux cleaned = -0.00410066 Jy ! Component: 800 - total flux cleaned = -0.00414647 Jy ! Component: 850 - total flux cleaned = -0.00421366 Jy ! Component: 900 - total flux cleaned = -0.00425726 Jy ! Component: 950 - total flux cleaned = -0.00434142 Jy ! Component: 1000 - total flux cleaned = -0.00438252 Jy ! Component: 1050 - total flux cleaned = -0.00442321 Jy ! Component: 1100 - total flux cleaned = -0.00456139 Jy ! Component: 1150 - total flux cleaned = -0.0046584 Jy ! Component: 1200 - total flux cleaned = -0.00473442 Jy ! Component: 1250 - total flux cleaned = -0.00484631 Jy ! Component: 1300 - total flux cleaned = -0.00495605 Jy ! Component: 1350 - total flux cleaned = -0.00497411 Jy ! Component: 1400 - total flux cleaned = -0.00502749 Jy ! Component: 1450 - total flux cleaned = -0.00511493 Jy ! Component: 1500 - total flux cleaned = -0.00518392 Jy ! Component: 1550 - total flux cleaned = -0.00526894 Jy ! Component: 1600 - total flux cleaned = -0.00530277 Jy ! Component: 1650 - total flux cleaned = -0.00540235 Jy ! Component: 1700 - total flux cleaned = -0.00540222 Jy ! Component: 1750 - total flux cleaned = -0.00543447 Jy ! Component: 1800 - total flux cleaned = -0.00545053 Jy ! Component: 1850 - total flux cleaned = -0.0054032 Jy ! Component: 1900 - total flux cleaned = -0.00541895 Jy ! Component: 1950 - total flux cleaned = -0.00543464 Jy ! Component: 2000 - total flux cleaned = -0.00543451 Jy ! Total flux subtracted in 2048 components = -0.00535889 Jy ! Clean residual min=-0.000888 max=0.001128 Jy/beam ! Clean residual mean=-0.000002 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.374777 Jy keep ! Adding 186 model components to the UV plane model. ! The established model now contains 416 components and 0.374777 Jy ![Exited script file: muppet] wmap "J1223+8040_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 10.73 at 5.017 degrees (North through East) ! Clean map min=-0.0023196 max=0.26878 Jy/beam ! Writing clean map to FITS file: J1223+8040_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.268784 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000319307 device "J1223+8040_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J1223+8040_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.356391 0.356391 0.712782 1.42556 2.85113 5.70225 11.4045 22.809 45.618 91.2361 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.268 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.216 x 10.73 at 5.017 degrees (North through East) ! Clean map min=-0.0023196 max=0.26878 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J1223+8040_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J1223+8040_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J1223+8040_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 12:15:02 2006