|
|
|
|
|
|
|
Damage-Tolerant
Fan Casings for Jet Engines
Transportation
Originating Technology/NASA Contribution
|
The
braided composite creates a lighter, more fuel-efficient
engine casing that is stronger and safer than those
made with aluminum or other traditional materials. |
All turbofan engines work on the same principle. A large fan at the front of the engine draws air in. A portion of the air enters the compressor, but a greater portion passes on the outside of the engine—this is called bypass air. The air that enters the compressor then passes through several stages of rotating fan blades that compress the air more, and then it passes into the combustor. In the combustor, fuel is injected into the airstream, and the fuel-air mixture is ignited. The hot gasses produced expand rapidly to the rear, and the engine reacts by moving forward.
If there is a flaw in the system, such as an unexpected obstruction, the fan blade can break, spin off, and harm other engine components. Fan casings, therefore, need to be strong enough to contain errant blades and damage-tolerant to withstand the punishment of a loose blade-turned-projectile.
NASA has spearheaded research into improving jet engine fan casings, ultimately discovering a cost-effective approach to manufacturing damage-tolerant fan cases that also boast significant weight reduction. In an aircraft, weight reduction translates directly into fuel burn savings, increased payload, and greater aircraft range.
This technology increases safety and structural integrity; is an attractive, viable option for engine manufacturers, because of the low-cost manufacturing; and it is a practical alternative for customers, as it has the added cost saving benefits of the weight reduction.
Partnership
A&P Technology, Inc., of Cincinnati, a leading manufacturer
of braided fabrics for composite reinforcement and advanced
technology applications, received a Small
Business Innovation Research (SBIR) grant through Glenn
Research Center to
develop damage-tolerant fan casings for jet engines. Additional
collaborators on this project included the Federal Aviation
Administration, Ohio State University, and the University
of Akron, Ohio. This group effort enabled the rapid development
and fabrication of the prototype composite fan cases for
direct comparison to the metal fan cases currently used
in aircraft engines.
The prototypes proved feasible. A&P, a seventh-generation,
family-owned company is partnered with two major manufacturers
of jet aircraft engines—Williams International and Honeywell
International Inc.—and is sponsored by General Electric
Corporation’s Aviation division, GE Aviation, in the development
and production of these braided composite fan cases.
For the successful work on this SBIR, A&P received
the “Emerging Technology Award” from the Ohio Department
of Development. The work also contributed to Glenn’s Jet
Engine Containment Concepts and Blade-Out Simulation Team
receiving the NASA “Turning Goals into Reality” award.
Product Outcome
|
The
efficient distribution of loads makes braided structures
highly impact resistant. Since all of the fibers
in the structure are involved in a loading event,
a braid absorbs a great deal of energy as it fails,
making it very effective for use in fan blade containment
for commercial jet aircraft. |
A&P uses triaxial carbon braid as an alternative to
aluminum or other solid metal in the manufacture of braided
fan containment cases for jet engines. The braided fan
case has a toughness superior to aluminum and enables significant
reductions in weight and fuel consumption.
The use of braided reinforcements also allows for a low-cost,
repeatable manufacturing process. A&P produces a braided sleeve with a custom shape that exactly fits the geometry of the fan case. Instead of having to cut complicated shapes to match the geometry of the fan case, the manufacturer can simply wrap A&P’s
tailored braid circumferentially in a continuous lay-up
to create the needed structural reinforcement. This cuts
down significantly on manufacturing time and costs.
Not only can the efficiency of the manufacturing process increase noticeably with the braid, but the performance of the braided case exceeds the performance of conventional fan cases. Impact testing has shown that braided laminates perform better, because the failure mode is much more controlled. In impact tests, the braided laminate experiences fracturing only near the point of impact while the rest of the laminate remains intact. In contrast, a conventional laminate that fractures from an impact spreads rapidly to regions remote to the initial impact location, like the “spider web” cracking of a windshield. This extensive failure results in a fan case structure that is less able to withstand secondary loads as the fan decelerates.
|
A braid’s resistance to crack propagation is a result of two key features: the interwoven fibers within each layer of braid, which distribute load evenly, and the isotropic architecture offered within each individual ply. Since each ply is isotropic within itself and identical to each neighboring ply, the interlaminar stresses are minimized during response to an impact event. Upon impact, crack propagation is contained to an area substantially smaller than those found upon impact of aluminum or laminate cases.
|
The
braided fan case has a toughness superior to aluminum
and enables significant reductions in weight and
fuel consumption. |
Although braiding has been a mechanized process for over
300 years, creating everyday products like clotheslines
and candlewicks, A&P has advanced the manufacturing technology to incorporate cutting-edge materials such as carbon fiber into structures of previously unthinkable scale. For instance, one fan case design it built is approximately 10 feet in diameter and 5 feet long. The braided reinforcements for this composite fan case were produced on one of A&P’s
Megabraiders—an 800 carrier braiding machine—the largest
braiding machine in the world.
In the case of the GEnx engine, the composite fan case
A&P is making for GE Aviation, braid will reduce engine
weight by 350 pounds, or 700 pounds in a two-engine aircraft.
The overall weight reduction is more than 800 pounds for
the aircraft, because composite materials also allow for
weight avoidance in the engine installation. The weight
reduction translates directly into fuel savings, increased
payload and/or greater aircraft range, and those are really
just secondary benefits of this technology, with the primary
benefit being the added safety of a stronger fan casing.
|
|
|
|