EQUIPMENT & SUPPLIES--Price list of sediment-sampling equipment and supplies for FY 1979 October 12, 1978 QUALITY OF WATER BRANCH TECHNICAL MEMORANDUM NO. 79.03 Subject: EQUIPMENT & SUPPLIES--Price list of sediment-sampling equipment and supplies for FY 1979 Attached is a copy of the subject price list showing prices of samplers and other supplies available from the Sedimentation Project for FY 1979. Please be reminded that: 1. The US DH-75-H sampler is not recommended for use by WRD. 2. The US P-72 (aluminum version of P-61Al) weighs only about 39 pounds. Careful consideration of the depth and velocity to be sampled should be made before ordering this sampler. 3. Pint glass bottles should not be ordered from the Project. Those bottles are stocked by WRD, and are listed in the April 1978 WRD Equipment Catalog, stock number 2202001, priced at $3.85 per box of 24. R. J. Pickering Chief, Quality of Water Branch Attachment WRD Distribution: FO, SL (Regional Hydrologist) PRICE LIST OF INSTRUMENTS FOR FISCAL YEAR 1979 The prices of instruments shown below are based on Fiscal Year 1979 costs and are subject to change without notice. Prices are f.o.b. Minneapolis, Minnesota, and apply only to purchases for U.S. Government agencies, universities, and colleges. Manual Suspended-Sediment Sampling Equipment Depth-Integrating Samplers US DH-48 Wading-type hand sampler, uses pint glass $ 96.00 container, does not include wading rod. US DH-48TM Trace-metal sampler version: Epoxy $ 102.00 painted, silicone rubber gasket and teflon nozzles. US DH-75-P Shell-type sheet metal version of DH-48 $ 75.00 Freeze resistant, can be used with many plastic bottles, 500 ml. Shipping weight 4 1/2 lb. - sent p. post. US DH-75-Q Similar to above, but takes 1000 ml $ 78.00 US DH-75-H Similar to above, but takes 2000 ml $ 78.00 (U.S.G.S. Personnel must get clearance) Wading Rod, S.S. 1 ft. $ 7.00 3 ft. $ 13.00 3 ft. w/plastic grip $ 14.00 Plastic grip which attaches $ 6.00 to standard wading rod. US M1-59 Hand-line sampler, uses pint glass container, $235.00 does not include hanger-bar connector. Shipping weight 33 lb. - sent p. post. US DH-59TM Trace-metal sampler version: Epoxy painted $ 290.00 silicone rubber gasket and teflon nozzles. US DH-59 Hanger bar connector, brass, sent p. post $ 7.50 US D-74 Reel sampler (quart version of D-49), $ 525.00 takes Owens-Illinois #6762 quart bottle only. Shipping weight 79 lb. - Shipped by truck. US D-74TM Trace-metal sampler version: Epoxy $ 568.00 painted, silicone rubber gasket, and teflon nozzles. US D-74AL Reel sampler, aluminum version $ 455.00 of D-74. Shipping weight 59 lb. - sent p. post. US D-74 Hanger bar and pin $ 5.00 US D-74AL-TM Trace-metal sampler version: Epoxy $ 498.00 painted, silicone rubber gasket, and teflon nozzles. US DH-76 Hand-line sampler (quart version of DH-59) $ 285.00 Takes Owens-Illinois #6762 quart bottle. Shipping weight 35 lb. - sent p. post. US DT1-76TM Trace-metal sampler version: Epoxy $ 339.00 painted, silicone rubber gasket, and teflon nozzles. Point-Integrating Samplers US P-61-Al Reel sampler, uses pint or quart containers$ 1,065.0O Shipping weight 150 lb. - Shipped by truck. US P-61-AlTM Trace-metal version:Epoxy painted, silicone 1,140.00 rubber gasket, teflon nozzles, and teflon- sleeved valve. US P-61-Al Hanger bar and pin $ 5.00 US P-63 Reel sampler, uses pint or quart containers $1,635.00 Shipping weight 256 lb. - Shipped by truck. US P-63TM Trace-metal version: Epoxy painted $1,710.00 US P-63 Hanger bar and pin $ 5.00 US P-72 Hand-line or reel sampler (aluminum version $ 845.00 of P-61-Al), uses pint or quart containers. Shipping weight 86 lb. - Shipped by truck. US P-72TM Trace-metal version: Epoxy painted, silicone $ 920.00 rubber gasket, teflon nozzles, and teflon- sleeved valve. Accessories for Manual Suspended Sediment Samplers Gaskets, silicone rubber - Specify sampler type $ 2.50 Gaskets, neoprene - Specify sampler type $ 1.50 Solenoid P-61 $ 24.00 Nozzles, brass or teflon - Specify sampler size $ 4.00 Pint glass bottles, each $ .30 Quart glass bottles with screw type covers, each $ .36 Standard Mayonnaise Owens-Illinois #6762. Paper caps, fit milk bottles $ .01 Wire baskets, hold 20 pint glass bottles, each $ l0.00 Wire baskets, hold 12 quart bottles, each $ 10.00 Wire baskets, wading-type. Rol)e included to hold on $ 12.00 chest, holds 10 pint glass bottles. US B.P.--76 Battery Pack, portable device for actuating $ 100.00 the P-61 and P-63 solenoids. Contains two batteries, incl. US B.P.-76 Battery Kit $ 13.50 Automatic Suspended Sampler Equipment - Non-Powered Samplers US U-59 Single stage sampler, uses pint glass $ 17.50 Less container. Shipping weight 1 lb. - sent p. post. US U-73 Single stage sampler $ 300.00 Shipping weight 12 lb. - sent p. post. Additional containers for U-73 $ 90.00 Shipping weight 4 lb. - sent p. post. Powered Samplers US PS-69 Pumping sampler, 72-bottle capacity $3,000.00 Shipping weight 285 lb. - Shipped by truck. US PS-69TM Trace-metal sampler, all plastic,version of $2,925.00 above sampler. uses roller pumps. One G.P.M. capacity. Shipping weight 285 lb. - Shipped by truck. US CS-77 Chickasha pumping sampler, 28-bottle capacity,$1,695.00 U.S.D.A. Approved, two different pumps available, 12-volt Accessories for Powered Samplers Extension cable for viewing control box operation, 5 ft $ 42.50 For other lengths: $37.50 plus $1.00 per foot of length, specify for PS-67 or PS-69 - sent p. post. Control box; specify PS-67 or PS-69 $ 360.00 US PFC-70 Proportional Frequency Controller, consult $ 950.00 with Project before ordering. Shipping container, 18x13x9, can hold 12 pints or quarts $ 40.00 specify. Shipping weight 16 lb. - sent p. post. Plastic quart tray-holders (12 quarts to tray) 6 trays fit in PS-69 - Set of 6 $ 45.00 Memory latch for use with PS-69 $ 60.00 In conjunction with a Fischer-Porter digital-punch water-stage recorder. Event marker; specify which water-stage recorder $ 50.00 Double Sample Trigger - DST-76, provides a double sample $ 85.00 on PS-69 to get a one-half gallon per event. Replacement Parts for Powered Samplers Event marker solenoid $ 20.00 Delta-stage switch; specify water-stage recorder $ 9.00 Float switch, with angle bracket $ 20.00 Float switch, old-style styrofoam $ 16.00 Electronic Time Clock, TC-76 $ 90.00 Time clock; specify one-half or one revolution per day $ 100.00 Time clock; 5 minute; Consult Laboratory $ 30.00 Brass timing disc kit for RPD clock includes 2 switches $ 25.00 and hardware Brass timing disc only $ 22.00 Diverter solenoid $ 22.00 Backflush solenoid $ 22.00 Pump, TMx55 $ 120.00 Teel IP555 pump parts: Back plate $ 18.00 Stator $ 11.00 Rotor $ 25.00 Air valve; specify PS-67 or PS-69 $ 25.00 Electronic Time Clock, TC-77 (12-volt) $ 90.00 Distributor-arm motor $ 90.OO Motor only $ 50.00 Stacom manometer kit $ 40.00 Motor 1/3 II.P. - 32 volt d.c $ 75.00 Backf]ush pump JABSCO - 12 volt $ 52.00 JABSCO repair kit $ 5.00 Backflush hose, ft $ 1.20 Diverter hose, ft $ .85 o Plastic quarts w/covers $ .18 Manual Bed-Material Sampling Equipment US BMH-53 Piston-type hand sampler $ 134.00 Shipping weight 8 lb. - sent p. post. US BMH-60 Reel or hand-line sampler $ 410.00 Shipping weight 55 lb. - sent p. post. US BMH-60TM Epoxy painted version of above sampler $ 460.00 US BM-54 Heavy reel sampler - Shipping weight 125 lb $ 460.00 US BM-54TM Trace-metal version: Epoxy painted and sleeved$ 510.00 Helley-Smith Bedload Bags 250 mm opening $ 16.50 125 mm opening $ 15.00 Laboratory Equipment US VASA Visual-accumulation-tube Particle-Size $ 900.00 Analyzer; complete with recorder and two each of four sizes of glass accumulation tubes. Shipping weight 66 lb. - Shipped by truck. Analyzer Motor, Model 60, 1 RPM, ccw $ 22.50 Analyzer Motor, Model 56, 120 RPM, CW $ 28.00 US VASA-AT Particle-Size Analyzer w/automatic tracker $1,200.00 Automatic tracker kit only $ 290.00 Visual-accumulation tubes; specify size $ 50.00 Bottom-withdrawal tubes $ 40.00 Shaw pipette racks $ 145.00 Reed switches for event marker $ 3.00 US VTP-73 Vertical Transit Rate Pacer $ 100.00 US SS-72A Laboratory sample splitter: beaker version $ 130.00 US SS-72B Laboratory sample splitter: tray version $ 130.00 US SR-72A Plastic sieve ring; includes five self-locking $ 16.00 straps. US SR-72B Plastic shaker; top for sieve rings, each $ 13.00 US SR-72C Plastic shaker; bottom for sieve rings, each $ 13.00 Self-locking nylon straps for sieve rings $ 2.50 In lots of five. Timing belts: Plastic $ 5.00 Rubber $ 2.00 For further information, Project personnel may be reached by phone at (612) 725-2218 or by mail addressed to: Federal Inter-Agency Sedimentation Project St. Anthony Falls Hydraulic Laboratory 3rd Avenue S.E. and Hennepin Island Minneapolis, Minnesota 55414 Mail all purchase orders to the above address but make them payable to: District Engineer U.S. Army Engineer District - St. Paul 1135 U.S. Post Office and Custom House St. Paul, Minnesota 55101