From edmunds@pa.msu.edu Tue Mar 29 14:10:19 2005
Date: Fri, 25 Mar 2005 10:44:55 -0500 (EST)
From: Dan Edmunds <edmunds@pa.msu.edu>
To: Linda Bagby <bagby@fnal.gov>, Alan L. Stone <alstone@fnal.gov>
Subject: 3rd SCL cable,  Wiener crate

Hello Linda and Alan,

Last night I installed the 3rd SCL cable run out to the sidewalk -
the one for the readout crate.

The 3 SCL cables now installed to the L1 Cal Trig Sidewalk Test area are:

         0x2D        test_l1cal_readout
         0x2E        test_l1cal_scld         non-readout
         0x2F        test_l1cal_tab          non-readout

This is shown in the crate list file at:

     www.pa.msu.edu/hep/d0/ftp/scl/crate_list.txt

Scott has these setup in the COOR Resource file,  i.e. you now
can write normal trigger files that refer to these Geographic
Sections by the names shown above.


As discussed with Darien and Paul last week and talked about in
the video meeting yesterday,  last night I removed the Wiener Crate
from rack S111 on the sidewalk and will take it back to MSU for
about 1 month.  This is to allow us to continue production testing
of ADF-2 cards at MSU  and  have a fully loaded 20 card ADF Crate
running at MSU.

List of Wiener things that belong at Fermi that I now have at MSU:

    the one spare fan tray
    the one spare power supply chassis
    the complete crate pulled from rack S111

All of this should be back in about 1 month.

          Dan