! Started logfile: J2203+3145_S_2006_02_16_yyk_uvs.log on Wed Jul 5 14:02:48 2006 obs J2203+3145_S_2006_02_16_yyk_uva.fits ! Reading UV FITS file: J2203+3145_S_2006_02_16_yyk_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.856773 visibilities/baseline/integration-bin. ! Found source: J2203+3145 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2421 lines of history. ! ! Reading 22516 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2203+3145_S_2006_02_16_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 1.22342 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=8.211 mas, bpa=19.83 degrees ! Estimated noise=2.28712 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.5, 0.5). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.988211 Jy ! Component: 100 - total flux cleaned = 1.25625 Jy ! Total flux subtracted in 100 components = 1.25625 Jy ! Clean residual min=-0.055661 max=0.099357 Jy/beam ! Clean residual mean=-0.000481 rms=0.019046 Jy/beam ! Combined flux in latest and established models = 1.25625 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 1.25625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.303689Jy sigma=4.769176 ! Fit after self-cal, rms=0.302831Jy sigma=4.757728 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.444 mas, bmaj=8.192 mas, bpa=19.62 degrees ! Estimated noise=1.77786 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.134254 Jy ! Component: 100 - total flux cleaned = 0.202763 Jy ! Component: 150 - total flux cleaned = 0.235027 Jy ! Component: 200 - total flux cleaned = 0.241598 Jy ! Total flux subtracted in 200 components = 0.241598 Jy ! Clean residual min=-0.045500 max=0.083710 Jy/beam ! Clean residual mean=-0.000703 rms=0.017065 Jy/beam ! Combined flux in latest and established models = 1.49785 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 21 model components to the UV plane model. ! The established model now contains 31 components and 1.49785 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.249867Jy sigma=3.887768 ! Fit after self-cal, rms=0.249329Jy sigma=3.879475 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.444 x 8.192 at 19.62 degrees (North through East) ! Clean map min=-0.044075 max=1.1436 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.987243 ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.89 HN 0.95 KP 0.92 ! LA 1.36 MK 0.90 NL 1.24 OV 0.91 ! PT 0.99 SC 0.94 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.986059 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 0.97 KP 0.95 ! LA 1.15 MK 0.99 NL 1.30 OV 0.93 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.977799 ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.94 HN 0.96 KP 0.93 ! LA 0.92 MK 1.10 NL 1.39 OV 0.95 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.0388 ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.93 HN 0.89 KP 0.87 ! LA 0.77 MK 1.10 NL 1.30 OV 0.82 ! PT 0.89 SC 1.09 ! ! ! Fit before self-cal, rms=0.249329Jy sigma=3.879475 ! Fit after self-cal, rms=0.122938Jy sigma=1.875982 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122938Jy sigma=1.875982 ! Fit after self-cal, rms=0.122990Jy sigma=1.874775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.494 mas, bmaj=8.223 mas, bpa=19.71 degrees ! Estimated noise=1.73368 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5.5, -5.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102122 Jy ! Component: 100 - total flux cleaned = 0.0064332 Jy ! Component: 150 - total flux cleaned = 0.00583164 Jy ! Component: 200 - total flux cleaned = 0.00527085 Jy ! Total flux subtracted in 200 components = 0.00527085 Jy ! Clean residual min=-0.013014 max=0.014091 Jy/beam ! Clean residual mean=-0.000005 rms=0.003794 Jy/beam ! Combined flux in latest and established models = 1.50312 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 26 model components to the UV plane model. ! The established model now contains 55 components and 1.50312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108830Jy sigma=1.644958 ! Fit after self-cal, rms=0.108158Jy sigma=1.635222 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108158Jy sigma=1.635222 ! Fit after self-cal, rms=0.102769Jy sigma=1.518690 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246173 Jy ! Component: 100 - total flux cleaned = 0.00250606 Jy ! Component: 150 - total flux cleaned = 0.00254182 Jy ! Component: 200 - total flux cleaned = 0.00219794 Jy ! Total flux subtracted in 200 components = 0.00219794 Jy ! Clean residual min=-0.010903 max=0.011284 Jy/beam ! Clean residual mean=-0.000022 rms=0.003224 Jy/beam ! Combined flux in latest and established models = 1.50532 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 76 components and 1.50532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099485Jy sigma=1.469070 ! Fit after self-cal, rms=0.099055Jy sigma=1.457159 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.494 x 8.223 at 19.71 degrees (North through East) ! Clean map min=-0.01074 max=1.1285 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099055Jy sigma=1.457159 ! Fit after self-cal, rms=0.078832Jy sigma=1.078125 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078832Jy sigma=1.078125 ! Fit after self-cal, rms=0.078864Jy sigma=1.077321 ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.224 mas, bpa=19.58 degrees ! Estimated noise=1.72686 mJy/beam. ! Added new window around map position (-17.5, -16). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.016953 Jy ! Component: 100 - total flux cleaned = 0.0220316 Jy ! Component: 150 - total flux cleaned = 0.0223204 Jy ! Component: 200 - total flux cleaned = 0.0228509 Jy ! Total flux subtracted in 200 components = 0.0228509 Jy ! Clean residual min=-0.007911 max=0.006812 Jy/beam ! Clean residual mean=-0.000026 rms=0.002012 Jy/beam ! Combined flux in latest and established models = 1.52817 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 32 model components to the UV plane model. ! The established model now contains 107 components and 1.52817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075019Jy sigma=0.996449 ! Fit after self-cal, rms=0.074963Jy sigma=0.993213 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074963Jy sigma=0.993213 ! Fit after self-cal, rms=0.074234Jy sigma=0.973393 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074234Jy sigma=0.973393 ! Fit after self-cal, rms=0.074239Jy sigma=0.973377 ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.221 mas, bpa=19.55 degrees ! Estimated noise=1.72322 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00365477 Jy ! Component: 100 - total flux cleaned = 0.00416653 Jy ! Component: 150 - total flux cleaned = 0.00479271 Jy ! Component: 200 - total flux cleaned = 0.00515573 Jy ! Total flux subtracted in 200 components = 0.00515573 Jy ! Clean residual min=-0.007023 max=0.005586 Jy/beam ! Clean residual mean=-0.000018 rms=0.001658 Jy/beam ! Combined flux in latest and established models = 1.53332 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 125 components and 1.53332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072954Jy sigma=0.950995 ! Fit after self-cal, rms=0.072961Jy sigma=0.949930 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=10 mas, bpa=16.69 degrees ! Estimated noise=2.16416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275823 Jy ! Component: 100 - total flux cleaned = 0.00451724 Jy ! Component: 150 - total flux cleaned = 0.00523862 Jy ! Component: 200 - total flux cleaned = 0.0056521 Jy ! Total flux subtracted in 200 components = 0.0056521 Jy ! Clean residual min=-0.005652 max=0.005779 Jy/beam ! Clean residual mean=-0.000032 rms=0.001760 Jy/beam ! Combined flux in latest and established models = 1.53897 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 150 components and 1.53897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072492Jy sigma=0.944825 ! Fit after self-cal, rms=0.072475Jy sigma=0.944378 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.805 mas, bmaj=8.237 mas, bpa=20.03 degrees ! Estimated noise=2.24156 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.967279 Jy ! Component: 100 - total flux cleaned = 1.23046 Jy ! Component: 150 - total flux cleaned = 1.33722 Jy ! Component: 200 - total flux cleaned = 1.39092 Jy ! Total flux subtracted in 200 components = 1.39092 Jy ! Clean residual min=-0.015696 max=0.020959 Jy/beam ! Clean residual mean=0.000016 rms=0.005436 Jy/beam ! Combined flux in latest and established models = 1.39092 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 1.39092 Jy ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.221 mas, bpa=19.55 degrees ! Estimated noise=1.72322 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0487476 Jy ! Component: 100 - total flux cleaned = 0.0771761 Jy ! Component: 150 - total flux cleaned = 0.0955978 Jy ! Component: 200 - total flux cleaned = 0.105557 Jy ! Total flux subtracted in 200 components = 0.105557 Jy ! Clean residual min=-0.009121 max=0.007927 Jy/beam ! Clean residual mean=-0.000023 rms=0.002479 Jy/beam ! Combined flux in latest and established models = 1.49648 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 85 components and 1.49648 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.777 mas, bmaj=10 mas, bpa=16.69 degrees ! Estimated noise=2.16416 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148663 Jy ! Component: 100 - total flux cleaned = 0.0237957 Jy ! Component: 150 - total flux cleaned = 0.0276977 Jy ! Component: 200 - total flux cleaned = 0.02977 Jy ! Total flux subtracted in 200 components = 0.02977 Jy ! Clean residual min=-0.007215 max=0.006461 Jy/beam ! Clean residual mean=-0.000027 rms=0.002208 Jy/beam ! Combined flux in latest and established models = 1.52625 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 136 components and 1.52625 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.221 mas, bpa=19.55 degrees ! Estimated noise=1.72322 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.0017401 Jy ! Component: 100 - total flux cleaned = -0.00107439 Jy ! Component: 150 - total flux cleaned = -0.000165835 Jy ! Component: 200 - total flux cleaned = 0.000608928 Jy ! Total flux subtracted in 200 components = 0.000608928 Jy ! Clean residual min=-0.007122 max=0.006496 Jy/beam ! Clean residual mean=-0.000024 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 1.52686 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 30 model components to the UV plane model. ! The established model now contains 165 components and 1.52686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072514Jy sigma=0.943774 ! Fit after self-cal, rms=0.072379Jy sigma=0.940741 wmodel J2203+3145_S_2006_02_16_yyk\_map.mod ! Writing 165 model components to file: J2203+3145_S_2006_02_16_yyk_map.mod wobs J2203+3145_S_2006_02_16_yyk\_uvs.fits ! Writing UV FITS file: J2203+3145_S_2006_02_16_yyk_uvs.fits wwins J2203+3145_S_2006_02_16_yyk\_map.win ! wwins: Wrote 3 windows to J2203+3145_S_2006_02_16_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0028504 Jy ! Component: 100 - total flux cleaned = -0.00512983 Jy ! Component: 150 - total flux cleaned = -0.00641515 Jy ! Component: 200 - total flux cleaned = -0.00745231 Jy ! Component: 250 - total flux cleaned = -0.00805327 Jy ! Component: 300 - total flux cleaned = -0.00883991 Jy ! Component: 350 - total flux cleaned = -0.00952582 Jy ! Component: 400 - total flux cleaned = -0.0103143 Jy ! Component: 450 - total flux cleaned = -0.0107575 Jy ! Component: 500 - total flux cleaned = -0.0111859 Jy ! Component: 550 - total flux cleaned = -0.011663 Jy ! Component: 600 - total flux cleaned = -0.0121259 Jy ! Component: 650 - total flux cleaned = -0.0126914 Jy ! Component: 700 - total flux cleaned = -0.0131322 Jy ! Component: 750 - total flux cleaned = -0.0134565 Jy ! Component: 800 - total flux cleaned = -0.013984 Jy ! Component: 850 - total flux cleaned = -0.0142933 Jy ! Component: 900 - total flux cleaned = -0.0145967 Jy ! Component: 950 - total flux cleaned = -0.0150418 Jy ! Component: 1000 - total flux cleaned = -0.0152821 Jy ! Component: 1050 - total flux cleaned = -0.0153297 Jy ! Component: 1100 - total flux cleaned = -0.0154237 Jy ! Component: 1150 - total flux cleaned = -0.0156068 Jy ! Component: 1200 - total flux cleaned = -0.0156069 Jy ! Component: 1250 - total flux cleaned = -0.0157837 Jy ! Component: 1300 - total flux cleaned = -0.0158707 Jy ! Component: 1350 - total flux cleaned = -0.0159563 Jy ! Component: 1400 - total flux cleaned = -0.0159992 Jy ! Component: 1450 - total flux cleaned = -0.0162479 Jy ! Component: 1500 - total flux cleaned = -0.0163286 Jy ! Component: 1550 - total flux cleaned = -0.0164488 Jy ! Component: 1600 - total flux cleaned = -0.0164884 Jy ! Component: 1650 - total flux cleaned = -0.0166436 Jy ! Component: 1700 - total flux cleaned = -0.0166057 Jy ! Component: 1750 - total flux cleaned = -0.0166812 Jy ! Component: 1800 - total flux cleaned = -0.0167553 Jy ! Component: 1850 - total flux cleaned = -0.0169379 Jy ! Component: 1900 - total flux cleaned = -0.0170093 Jy ! Component: 1950 - total flux cleaned = -0.0170091 Jy ! Component: 2000 - total flux cleaned = -0.0171144 Jy ! Total flux subtracted in 2048 components = -0.0171491 Jy ! Clean residual min=-0.002429 max=0.001995 Jy/beam ! Clean residual mean=-0.000002 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 1.50971 Jy keep ! Adding 115 model components to the UV plane model. ! The established model now contains 280 components and 1.50971 Jy ![Exited script file: muppet] wmap "J2203+3145_S_2006_02_16_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.221 at 19.55 degrees (North through East) ! Clean map min=-0.0065566 max=1.1216 Jy/beam ! Writing clean map to FITS file: J2203+3145_S_2006_02_16_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.12164 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000697015 device "J2203+3145_S_2006_02_16_yyk\_map.eps/VPS" ! Attempting to open device: 'J2203+3145_S_2006_02_16_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.186427 0.186427 0.372854 0.745708 1.49142 2.98283 5.96567 11.9313 23.8627 47.7253 95.4507 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 1.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.48 x 8.221 at 19.55 degrees (North through East) ! Clean map min=-0.0065566 max=1.1216 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2203+3145_S_2006_02_16_yyk\_map.gif/gif" ! Attempting to open device: 'J2203+3145_S_2006_02_16_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2203+3145_S_2006_02_16_yyk_uvs.log closed on Wed Jul 5 14:03:17 2006