Procurement SIBR Records
| SDO |
Document Number |
Document Title |
Edition |
Incorp By |
| Defense Supply Center (DSC) |
QPL-25038-32 |
General Specification For Wire, Electrical, High Temperature And Fire Resistant, And Flight Critical |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-25516-13 |
General Specification For Connectors, Electrical, Miniature, Coaxial, Environmental Resistant Type |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-25670-17 |
General Specification For Earphone Elements |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-26202-7 |
General Specification For Light, Marker, Airport, Semiflush |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-26542-17 |
General Specification For Microphone, And Microphone Assemblies, Dynamic |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-27208-43 |
General Specification For Resistor, Variable, Wire-Wound, Nonprecision |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-27272-12 |
General Specification For Fittings, Tetrafluoroethylene Hose, High Temperature, Medium Pressure |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-27715-5 |
General Specification For Circuit Breaker, Trip Free, High Temperature, Aircraft |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-28748-64 |
General Specification For Connector, Plug And Receptacle, Rectangular, Rack And Panel, Solder Type And Crimp Type Contacts |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-28750-34 |
General Specification For Relays, Solid State |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-28776-34 |
General Specification For Relays, Hybrid, Established Reliability |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-49137-34 |
General Specification For Capacitors, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Molded, Conformal Coated And Metal Case With Plastic End Fill, Nonhermetically Sealed |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-49142-16 |
General Specification For Connector, Triaxial, Radiofrequency |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-49291-7 |
General Specification For Fiber, Optical, (Metric) |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-49462-4 |
General Specification For Resistors, Fixed, Film, High Voltage |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-49465-14 |
General Specification For Resistors, Fixed, Metal Element (Power Type), (Very Low Resistance Values) |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-49470-12 |
General Specification For Capacitor, Fixed, Ceramic Dielectric, Switch Mode Power Supply (General Purpose And Temperature Stable), Standard Reliability And High Reliability |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-52471-13 |
General Specification For Hose And Hose Assembllies, Rubber, Hydraulic, Pressure Type |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-52525-11 |
General Specification For Fittings, Hose, Reusable, Field-Attachable And Clamp-Halves |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55074-8 |
General Specification For Connectors, Plug And Receptacle, Telephone, Electrical, Subassembly And Accessories And Contact Assembly, Electrical |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55116-13 |
General Specification For Connectors, Miniature Audio, Five-Pin And Six-Pin |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55181-14 |
General Specification For Connector, Plug And Receptacle, Intermediate Power (Electrical, Waterproof) Type Mw |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55182-151 |
General Specification For Resistors, Fixed, Film, Nonestablished Reliability, Established Reliability, And Space Level |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55302-99 |
General Specification For Connectors, Printed Circuit Subassembly And Accessories |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55310-65 |
General Specification For Oscillators, Crystal Controlled |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55339-56 |
General Specification For Adapters, Connectors, Coaxial, Radio Frequency (Between Series And Within Series) |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55342-92 |
General Specification For Resistors, Fixed, Film, Chip, Nonestablished Reliability, Established Reliability, Space Level |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55365-68 |
General Specification For Capacitor, Fixed, Electrolytic (Tantalum), Chip, Nonestablished Reliability, Established Reliability |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55514-42 |
General Specification For Capacitors, Fixed, Plastic (Or Metallized Plastic) Dielectric, Dc Or Dc-Ac, In Nonmetal Cases, Non-Established And Established Reliability |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55629-17 |
General Specification For Circuit Breaker, Magnetic, Unsealed Or Panel Seal, Trip-Free |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-55681-116 |
General Specification For Capacitor, Chip, Multiple Layer, Fixed, Ceramic Dielectric, Established Reliability And Non-Established Reliability |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-81511-9 |
General Specification For Connectors, Electrical, Circular, High Density, Quick Disconnect, Environment Resisting, And Accessories |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-81659-15 |
General Specification For Connectors, Electrical, Rectangular Crimp Contacts |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-81714-11 |
General Specification For Terminal Junction System (Tjs), Environment Resistant |
NDG |
DoD |
| Defense Supply Center (DSC) |
QPL-81790-8 |
General Specification For Connectors, Receptacle, External Electric Power, Aircraft |
NDG |
DoD |
| Defense Supply Center (DSC) |
ACI503.1 |
Eposy Resin Standards |
NDG |
DoD |
| Defense Supply Center (DSC) |
AMCA99 |
Standards Handbook |
NDG |
DoD |
| Defense Supply Center (DSC) |
SAE-MA1565 |
Procurement Specifications For Inserts, Screw Thread, Helical Coil, Metric Series |
NDG |
DoD |
| Defense Supply Center (DSC) |
SDI100 |
Recommended Specifications Standard For Steel Door & Frame |
NDG |
DoD |
| Defense Supply Center (DSC) |
DOD-S-85694 |
Spectrometric Oil Standards (Metric) |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-HDBK-1223 |
Nontactical Wheeled Vehicles Treatment, Painting, Identification Marking And Data Plate Standards |
NDG |
DoD |
| Defense Supply Center (DSC) |
NA8 |
Procurement Specifications For Fasteners, Metric, Alloy Steel, Externally Threaded, 1100 Mpa Tensile, 660 Mpa Shear |
NDG |
DoD |
| Defense Supply Center (DSC) |
NACM81396 |
Tire Chain Specifications |
NDG |
DoD |
| Defense Supply Center (DSC) |
RMA-IP7 |
Specifications For Rubber Welding Hose |
NDG |
DoD |
| Defense Supply Center (DSC) |
SAE-J513 |
Refrigeration-General Specifications For Tube Fittings |
NDG |
DoD |
| Defense Supply Center (DSC) |
SAE-J760 |
Dimensional Specifications For General Service Sealed Lighting Units |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-636(4) |
Visual Inspection Standards For Small Arms Ammunition Through Caliber .50 |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-644A(5) |
Visual Inspection Standards And Inspection Procedures For Inspection Of Packaging, Packing And Marking Of Small Arms Ammunition |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-651(2) |
Visual Inspection Standards For 20Mm Ammunition And Components |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-801B |
Inspection And Acceptance Standards For Propulsion Fluid Cells And Fittings |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-981B(4) |
Design, Manufacturing And Quality Standards For Custom Electromagnetic Devices For Space Applications |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-1170 NOT 1 |
Visual Standards And Comparison Methods For Evaluating Grain Configuration In 7.62 Mm Cartridge Cases |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-1180B(1) |
Safety Standards For Military Ground Vehicles |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-1232 NOT 1 |
Visual Inspection Standards For Cups And Disks Used In Small Arms Ammunition Manufacture |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-1894B |
Radiographic Reference Standards And Radiographic Procedures For Partial-Penetration Steel Welds |
NDG |
DoD |
| Defense Supply Center (DSC) |
MIL-STD-1895B |
Radiographic Reference Standards And Radiographic Procedures For Partial-Penetration Aluminum Welds |
NDG |
DoD |
| Defense Supply Center (DSC) |
A-A-54727 |
Disk, Color Standards, Anti-Icing Additive |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28A NOT 1 |
Screw-Thread Standards For Federal Services |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/1A NOT 1 |
Screw-Thread Standards For Federal Services Section 1 Nomenclature, Definitions And Letter Symbols For Screw Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/4 NOT 3 |
Screw Thread Standards For Federal Services, Section 4, Controlled Radius Root Screw Threads, Unj Symbol |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/5 NOT 3 |
Screw Thread Standards For Federal Sev1Ces, Section 5, Unified Miniature Screw Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/7A NOT 3 |
Screw-Thread Standards For Federal Services Section 7 Pipe Threads, General Purpose |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/9A NOT 2 |
Screw-Thread Standards For Federal Services Section 9 Gas Cylinder Valve Outlet And Inlet Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/11 NOT 3 |
Screw Thread Standards For Federal Services, Section 11, Hose Connections For Welding And Cutting Equipment |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/13A NOT 2 |
Screw-Thread Standards For Federal Services, Section 13, Stub Acme Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/16 NOT 3 |
Screw Thread Standards For Federal Services Section 16 Microscope Objective And Noise Piece, 0.800 - 36Amo |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/18B NOT 1 |
Screw-Thread Standards For Federal Services Section 18 Photographic Equipment Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/19A NOT 2 |
Screw Thread Standards For Federal Services, Section 19, Miscellaneous Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/21B NOT 3 |
Screw-Thread Standards For Federal Services Section 21 Metric Screw-Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/23 NOT 2 |
Screw-Thread Standards For Federal Services Section 23 Class 5 Interference-Fit Screw Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/2B NOT 1 |
Screw-Thread Standards For Federal Services Section 2 Unified Inch Screw Threads- Un And Unr Thread Forms |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/6A(1) NOT 1 |
Screw-Thread Standards For Federal Services Section 6 Gages And Gaging For Unified Screw Threads-Un And Unr Thread Forms |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/8B NOT 1 |
Screw-Thread Standards For Federal Services Section 8 Dryseal Pipe Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/10A NOT 1 |
Screw-Thread Standards For Federal Services Section 10 Hose Coupling And Fire Hose Coupling Screw Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/12A NOT 2 |
Screw-Thread Standards For Federal Services Section 12 Acme Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/14A NOT 3 |
Screw-Thread Standards For Federal Services Section 14 Buttress Screw Threads-7 Deg./45 Deg. Flank Angles |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/15B NOT 1 |
Screw-Thread Standards For Federal Services Section 15 Rolled Threads For Screw-Shells For Electric Lampholders And Lamp Bases |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/17A NOT 2 |
Screw-Thread Standards For Federal Services Section 17 Surveying Instrument Mounting Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/20B(1) |
Screw-Thread Standards For Federal Services Section 20 Inspection Methods For Acceptability Of Un, Unr, Unj, M, And Mj Screw Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-H28/22A(1) NOT 1 |
Screw-Thread Standards For Federal Services Section 22 Gages And Gaging For Metric Screw Threads-M And Mj Thread Forms |
NDG |
DoD |
| Defense Supply Center (DSC) |
FED-STD-369 |
Sanitation Standards For Fish Plants |
NDG |
DoD |
| Defense Supply Center (DSC) |
QSTAG-2002 ED.1 |
Interoperable Performance Specifications For Cbw Detection Equipment |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-C37.42 |
Specifications For Distribution Cutout & Fuse Link |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-C78.40 |
American National Standard For Lamps, Mercury - Specifications |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-C78.376 |
Specifications For The Chromaticity Of Lamps, Fluorescent |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-IT9.1 |
Specifications For Silver-Gelatin Type - Stability |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-O5.1 |
Specifications & Dimensions For Wood Poles |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-PH1.49 |
American National Standard Specifications For Film Cassettes, Medical Radiographic |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-PH3.617 |
Definitions And Specifications For Appearance Imperfections Of Methods Of Testingoptical Elements And Assemblies |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-X3.2 |
Print Specifications For Magnetic Ink Character Recognition |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-Z90.1 |
Specifications For Headgear, Protective, For Motor Vehicular Users |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-Z97.1 |
Standard For Safety Glazing Materials Used In Buildings - Safety Performance Specifications And Methods Of Test |
NDG |
DoD |
| Defense Supply Center (DSC) |
ASTM-D117 |
Test Methods And Specifications For Oils Of Petroleum Origin, Sampling |
NDG |
DoD |
| Defense Supply Center (DSC) |
ASTM-D2824 |
Standard Specifications For Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, And Fibered Without Asbestos |
NDG |
DoD |
| Defense Supply Center (DSC) |
ASME-B1.7 |
Screw-Thread Standards For Federal Services Section 1, Nomenclature, Definitions And Letter Symbols For Screw Threads |
NDG |
DoD |
| Defense Supply Center (DSC) |
ASQC-Q9000.1 |
Quality Management And Quality Assurance Standards--Guidelines For Selection And Use |
NDG |
DoD |
| Defense Supply Center (DSC) |
ASTM-D2162 |
Basic Calibration Of Master Viscometers And Viscosity Oil Standards |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-Y14.7.1 |
Gear Drawing Standards Part 1 For Spur, Helical, Double Helical & Rack |
NDG |
DoD |
| Defense Supply Center (DSC) |
ANSI-Y14.7.2 |
Gear & Spline Drawing Standards - Part 2, Bevel & Hypoid Gears |
NDG |
DoD |
| Defense Supply Center (DSC) |
APA-E445 |
Performance Standards And Policies For Panels, Structural-Use |
NDG |
DoD |
First
Previous
