The following information is also available:
Time column is TIME ORDERED-> Fetching fa930416_0325.0950.Z
ATTITUDE_V0.9j reading attitude file:./merged.tmp open asc output file:out.tmp AVERAGE ASPECT AND OFFSET FOR THIS ATTITUDE FILE: Attitude file start and stop ascatime : 9084316.119000 9107408.035300 Data file start and stop ascatime : 9084316.119000 9107408.035300 Aspecting run start and stop ascatime : 9084316.119075 9107408.035223 Time interval averaged over (seconds) : 23091.916148 Total pointing and manuver time (sec) : 14143.982422 8947.983398 Mean boresight Euler angles : 94.523364 80.725364 172.647976 RA DEC SUN ANGLE Mean solar position (deg) : 23.45 9.79 Mean aberration (arcsec) : -7.49 -4.43 Mean sat X-axis (deg) : 235.843536 78.184854 90.23 Mean sat Y-axis (deg) : 3.332086 7.255391 20.05 Mean sat Z-axis (deg) : 94.523364 9.274636 69.95 RA DEC ROLL OFFSET (deg) (deg) (deg) (arcmin) Average 94.253510 9.175379 82.691162 0.135363 Minimum 94.250313 9.172532 82.682114 0.046628 Maximum 94.257179 9.178854 82.696800 2.391809 Sigma (RMS) 0.000382 0.000224 0.001755 0.066475 Number of ASPECT records processed = 15708 Aspecting to RA/DEC : 94.25350952 9.17537880 closing output file... closing attitude file...-> Standard Output From STOOL checkatt:
Opening file: ./out.tmp ***************** Observation Info ****************** RA (J2000 deg): 94.254 DEC: 9.175 START TIME: SC 9084316.1191 = UT 16/04/93 03:25:16 ****** Definition of Attitude SENSOR Bit Flags ****** Sensors used in the attitude determination and attitude control mode 1: USED, 0: NOT USED B0:STT-A, B1:STT-B, B2:NSAS, B3:GAS, B4:SSAS-SA, B5:SSAS-SB, B6:IRU-X, B7:IRU-Y, B8:IRU-Z, B9:IRU-S1, B10:IRU-S2, B11: Attitude control mode 1: coarse, 0: fine B12: Sun presence 1: day, 0: night B13: STT-A earth occultation 1: earth occultation, 0: no occultation B14: STT-B earth occultation 1: earth occultation, 0: no occultation B16,17,18: STT-A track stars no.1,2,3, 1: USED, 0: NOT USED B19,20,21: STT-B track stars no.1,2,3, 1: USED, 0: NOT USED B22,23: always 0 ******** Attitude File Reconstruction Summary ******* S S N G S S I I I I I A S S S S S T T S A S S R R R R R C U T T T T T T A S A A U U U U U M N T T T T - - S . A A - - - - - . . - - - - A B . . - - X Y Z S S . . A B A B . . . . S S . . . 1 2 . . O O S S offset_time separation sensor . . . . A B . . . . . . . C C T T (sec) (arcmin) . . . . . . . . . . . . . C C R R BIT: 0 1 2 3 4 5 6 7 8 9 A B C D E 4.000093 2.392 4803 1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 76.000023 1.370 4803 1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 287.999084 0.340 4803 1 1 0 0 0 0 0 0 0 0 0 1 0 0 1 0 0 1135.995972 0.139 4403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 4671.982910 0.137 FC48C3 1 1 0 0 0 0 1 1 0 0 0 1 0 0 1 4 7 6895.975098 0.097 4403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 10431.961914 0.136 DC48C3 1 1 0 0 0 0 1 1 0 0 0 1 0 0 1 4 3 12655.954102 0.085 4403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 16191.941406 0.109 FC48C3 1 1 0 0 0 0 1 1 0 0 0 1 0 0 1 4 7 18415.933594 0.192 4403 1 1 0 0 0 0 0 0 0 0 1 0 0 0 1 0 0 21951.919922 0.211 FC48C3 1 1 0 0 0 0 1 1 0 0 0 1 0 0 1 4 7 23091.916016 1.201 5803 1 1 0 0 0 0 0 0 0 0 0 1 1 0 1 0 0 Attitude Records: 15708 Attitude Steps: 12 Maneuver ACM time: 8947.98 sec Pointed ACM time: 14144.0 sec-> Calculating aspect point
97 96 count=7681 sum1=726025 sum2=620047 sum3=1.32611e+06 97 97 count=591 sum1=55863.2 sum2=47710.3 sum3=102036 98 96 count=7381 sum1=697691 sum2=595837 sum3=1.27432e+06 98 97 count=38 sum1=3592.02 sum2=3067.82 sum3=6560.62 98 98 count=8 sum1=756.266 sum2=645.926 sum3=1381.19 99 98 count=6 sum1=567.22 sum2=484.463 sum3=1035.88 99 99 count=1 sum1=94.543 sum2=80.754 sum3=172.647 100 100 count=1 sum1=94.545 sum2=80.757 sum3=172.642 0 out of 15707 points outside bin structure-> Euler angles: 94.5237, 80.7253, 172.648
Interpolating 1 records in time interval 9.1074e+06 - 9.10741e+06
frf_directory,s,h,"./",,,"frf directory" frf_file,s,h,"ft930416_0325.0950",,,"frf telemetry file"-> Standard Output From FTOOL frfread:
Frfread version 3.00 patch 32 ASCA format Telemetry file: ft930416_0325.0950 Initial mode = 2 (Bright) Initial value for dummy = 0 Initial datamode = 0 (Observation) Initial sis = 0 Initial bit_rate = 2 Reading all superframes reading PH mode reading PCAL mode reading MPCmode No mode = 0 Faint = 108192 Bright = 143264 Fast = 0 Frame = 0 Dark frame = 0 Histogram = 0 Integration = 0 PH = 251456 MPC = 0 PCAL = 0 Memory Check = 0 Number of superframes = 3992 no. of SIS events found = 892055-> Standard Error Output From FTOOL frfread
coordinate error 0 1 coordinate error 0 0 coordinate error 0 0 coordinate error 0 0 coordinate error 192 0 coordinate error 256 0 coordinate error 0 48 coordinate error 0 0 coordinate error 192 0 coordinate error 3 0 coordinate error 0 0 coordinate error 3 0 coordinate error 0 12 coordinate error 1 256 coordinate error 0 96 coordinate error 0 0 coordinate error 0 12 coordinate error 0 3 coordinate error 0 0 coordinate error 0 0-> Removing the following files with NEVENTS=0
ft930416_0325_0950G200170M.fits ft930416_0325_0950G201070M.fits ft930416_0325_0950G300170M.fits ft930416_0325_0950G301070M.fits ft930416_0325_0950S000102M.fits ft930416_0325_0950S000302H.fits ft930416_0325_0950S000501M.fits ft930416_0325_0950S001102H.fits ft930416_0325_0950S001301M.fits ft930416_0325_0950S001702H.fits ft930416_0325_0950S001901M.fits ft930416_0325_0950S100102M.fits ft930416_0325_0950S100401M.fits ft930416_0325_0950S101101M.fits ft930416_0325_0950S101601M.fits-> Checking for empty GTI extensions
ft930416_0325_0950S000202M.fits[3] ft930416_0325_0950S000401H.fits[3] ft930416_0325_0950S000602M.fits[3] ft930416_0325_0950S000702M.fits[3] ft930416_0325_0950S000802M.fits[3] ft930416_0325_0950S000902H.fits[3] ft930416_0325_0950S001002M.fits[3] ft930416_0325_0950S001201H.fits[3] ft930416_0325_0950S001402M.fits[3] ft930416_0325_0950S001502M.fits[3] ft930416_0325_0950S001602M.fits[3] ft930416_0325_0950S001801H.fits[3] ft930416_0325_0950S002002M.fits[3]-> Merging GTIs from the following files:
ft930416_0325_0950S100202M.fits[3] ft930416_0325_0950S100301H.fits[3] ft930416_0325_0950S100502M.fits[3] ft930416_0325_0950S100602M.fits[3] ft930416_0325_0950S100702M.fits[3] ft930416_0325_0950S100802H.fits[3] ft930416_0325_0950S100902M.fits[3] ft930416_0325_0950S101001H.fits[3] ft930416_0325_0950S101202M.fits[3] ft930416_0325_0950S101302M.fits[3] ft930416_0325_0950S101402M.fits[3] ft930416_0325_0950S101501H.fits[3] ft930416_0325_0950S101702M.fits[3]-> Merging GTIs from the following files:
ft930416_0325_0950G200270M.fits[3] ft930416_0325_0950G200370M.fits[3] ft930416_0325_0950G200470H.fits[3] ft930416_0325_0950G200570H.fits[3] ft930416_0325_0950G200670H.fits[3] ft930416_0325_0950G200770H.fits[3] ft930416_0325_0950G200870M.fits[3] ft930416_0325_0950G200970M.fits[3] ft930416_0325_0950G201170M.fits[3] ft930416_0325_0950G201270M.fits[3] ft930416_0325_0950G201370H.fits[3] ft930416_0325_0950G201470H.fits[3] ft930416_0325_0950G201570H.fits[3] ft930416_0325_0950G201670H.fits[3] ft930416_0325_0950G201770M.fits[3] ft930416_0325_0950G201870M.fits[3] ft930416_0325_0950G201970H.fits[3] ft930416_0325_0950G202070H.fits[3] ft930416_0325_0950G202170H.fits[3] ft930416_0325_0950G202270H.fits[3] ft930416_0325_0950G202370M.fits[3] ft930416_0325_0950G202470M.fits[3] ft930416_0325_0950G202570H.fits[3] ft930416_0325_0950G202670H.fits[3] ft930416_0325_0950G202770H.fits[3] ft930416_0325_0950G202870H.fits[3] ft930416_0325_0950G202970M.fits[3] ft930416_0325_0950G203070M.fits[3]-> Merging GTIs from the following files:
ft930416_0325_0950G300270M.fits[3] ft930416_0325_0950G300370M.fits[3] ft930416_0325_0950G300470H.fits[3] ft930416_0325_0950G300570H.fits[3] ft930416_0325_0950G300670H.fits[3] ft930416_0325_0950G300770H.fits[3] ft930416_0325_0950G300870M.fits[3] ft930416_0325_0950G300970M.fits[3] ft930416_0325_0950G301170M.fits[3] ft930416_0325_0950G301270M.fits[3] ft930416_0325_0950G301370H.fits[3] ft930416_0325_0950G301470H.fits[3] ft930416_0325_0950G301570H.fits[3] ft930416_0325_0950G301670H.fits[3] ft930416_0325_0950G301770M.fits[3] ft930416_0325_0950G301870M.fits[3] ft930416_0325_0950G301970H.fits[3] ft930416_0325_0950G302070H.fits[3] ft930416_0325_0950G302170H.fits[3] ft930416_0325_0950G302270H.fits[3] ft930416_0325_0950G302370M.fits[3] ft930416_0325_0950G302470M.fits[3] ft930416_0325_0950G302570H.fits[3] ft930416_0325_0950G302670H.fits[3] ft930416_0325_0950G302770H.fits[3] ft930416_0325_0950G302870H.fits[3] ft930416_0325_0950G302970M.fits[3] ft930416_0325_0950G303070M.fits[3]
GISSORTCODE:LO:Start program GISSORTCODE:LO:End program-> Standard Error Output From STOOL gissortsplit:
GISSORTSPLIT:LO:Start program GISSORTSPLIT:LO:g200170h.prelist merge count = 4 photon cnt = 174958 GISSORTSPLIT:LO:g200270h.prelist merge count = 4 photon cnt = 197 GISSORTSPLIT:LO:g200370h.prelist merge count = 1 photon cnt = 82 GISSORTSPLIT:LO:g200470h.prelist merge count = 1 photon cnt = 78 GISSORTSPLIT:LO:g200570h.prelist merge count = 1 photon cnt = 7 GISSORTSPLIT:LO:g200670h.prelist merge count = 1 photon cnt = 3 GISSORTSPLIT:LO:g200770h.prelist merge count = 1 photon cnt = 59 GISSORTSPLIT:LO:g200870h.prelist merge count = 1 photon cnt = 61 GISSORTSPLIT:LO:g200970h.prelist merge count = 1 photon cnt = 53 GISSORTSPLIT:LO:g201070h.prelist merge count = 1 photon cnt = 39 GISSORTSPLIT:LO:g200170m.prelist merge count = 2 photon cnt = 61 GISSORTSPLIT:LO:g200270m.prelist merge count = 6 photon cnt = 136308 GISSORTSPLIT:LO:g200370m.prelist merge count = 4 photon cnt = 1590 GISSORTSPLIT:LO:Total filenames split = 28 GISSORTSPLIT:LO:Total split file cnt = 13 GISSORTSPLIT:LO:End program-> Creating ad10012010g200170h.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950G200770H.fits 2 -- ft930416_0325_0950G201670H.fits 3 -- ft930416_0325_0950G202270H.fits 4 -- ft930416_0325_0950G202870H.fits Merging binary extension #: 2 1 -- ft930416_0325_0950G200770H.fits 2 -- ft930416_0325_0950G201670H.fits 3 -- ft930416_0325_0950G202270H.fits 4 -- ft930416_0325_0950G202870H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad10012010g200270m.unf
---- cmerge: version 1.5 ---- A total of 6 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950G200370M.fits 2 -- ft930416_0325_0950G200970M.fits 3 -- ft930416_0325_0950G201270M.fits 4 -- ft930416_0325_0950G201870M.fits 5 -- ft930416_0325_0950G202470M.fits 6 -- ft930416_0325_0950G203070M.fits Merging binary extension #: 2 1 -- ft930416_0325_0950G200370M.fits 2 -- ft930416_0325_0950G200970M.fits 3 -- ft930416_0325_0950G201270M.fits 4 -- ft930416_0325_0950G201870M.fits 5 -- ft930416_0325_0950G202470M.fits 6 -- ft930416_0325_0950G203070M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad10012010g200370m.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950G200870M.fits 2 -- ft930416_0325_0950G201770M.fits 3 -- ft930416_0325_0950G202370M.fits 4 -- ft930416_0325_0950G202970M.fits Merging binary extension #: 2 1 -- ft930416_0325_0950G200870M.fits 2 -- ft930416_0325_0950G201770M.fits 3 -- ft930416_0325_0950G202370M.fits 4 -- ft930416_0325_0950G202970M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000197 events
ft930416_0325_0950G200670H.fits ft930416_0325_0950G201570H.fits ft930416_0325_0950G202170H.fits ft930416_0325_0950G202770H.fits-> Ignoring the following files containing 000000082 events
ft930416_0325_0950G202570H.fits-> Ignoring the following files containing 000000078 events
ft930416_0325_0950G202670H.fits-> Ignoring the following files containing 000000061 events
ft930416_0325_0950G202070H.fits-> Ignoring the following files containing 000000061 events
ft930416_0325_0950G200270M.fits ft930416_0325_0950G201170M.fits-> Ignoring the following files containing 000000059 events
ft930416_0325_0950G201970H.fits-> Ignoring the following files containing 000000053 events
ft930416_0325_0950G200470H.fits-> Ignoring the following files containing 000000039 events
ft930416_0325_0950G200570H.fits-> Ignoring the following files containing 000000007 events
ft930416_0325_0950G201370H.fits-> Ignoring the following files containing 000000003 events
ft930416_0325_0950G201470H.fits-> Collecting GIS3 event files by mode
GISSORTCODE:LO:Start program GISSORTCODE:LO:End program-> Standard Error Output From STOOL gissortsplit:
GISSORTSPLIT:LO:Start program GISSORTSPLIT:LO:g300170h.prelist merge count = 4 photon cnt = 156908 GISSORTSPLIT:LO:g300270h.prelist merge count = 4 photon cnt = 156 GISSORTSPLIT:LO:g300370h.prelist merge count = 1 photon cnt = 71 GISSORTSPLIT:LO:g300470h.prelist merge count = 1 photon cnt = 74 GISSORTSPLIT:LO:g300570h.prelist merge count = 1 photon cnt = 4 GISSORTSPLIT:LO:g300670h.prelist merge count = 1 photon cnt = 4 GISSORTSPLIT:LO:g300770h.prelist merge count = 1 photon cnt = 59 GISSORTSPLIT:LO:g300870h.prelist merge count = 1 photon cnt = 47 GISSORTSPLIT:LO:g300970h.prelist merge count = 1 photon cnt = 41 GISSORTSPLIT:LO:g301070h.prelist merge count = 1 photon cnt = 46 GISSORTSPLIT:LO:g300170m.prelist merge count = 2 photon cnt = 57 GISSORTSPLIT:LO:g300270m.prelist merge count = 6 photon cnt = 134921 GISSORTSPLIT:LO:g300370m.prelist merge count = 4 photon cnt = 1593 GISSORTSPLIT:LO:Total filenames split = 28 GISSORTSPLIT:LO:Total split file cnt = 13 GISSORTSPLIT:LO:End program-> Creating ad10012010g300170h.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950G300770H.fits 2 -- ft930416_0325_0950G301670H.fits 3 -- ft930416_0325_0950G302270H.fits 4 -- ft930416_0325_0950G302870H.fits Merging binary extension #: 2 1 -- ft930416_0325_0950G300770H.fits 2 -- ft930416_0325_0950G301670H.fits 3 -- ft930416_0325_0950G302270H.fits 4 -- ft930416_0325_0950G302870H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad10012010g300270m.unf
---- cmerge: version 1.5 ---- A total of 6 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950G300370M.fits 2 -- ft930416_0325_0950G300970M.fits 3 -- ft930416_0325_0950G301270M.fits 4 -- ft930416_0325_0950G301870M.fits 5 -- ft930416_0325_0950G302470M.fits 6 -- ft930416_0325_0950G303070M.fits Merging binary extension #: 2 1 -- ft930416_0325_0950G300370M.fits 2 -- ft930416_0325_0950G300970M.fits 3 -- ft930416_0325_0950G301270M.fits 4 -- ft930416_0325_0950G301870M.fits 5 -- ft930416_0325_0950G302470M.fits 6 -- ft930416_0325_0950G303070M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad10012010g300370m.unf
---- cmerge: version 1.5 ---- A total of 4 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950G300870M.fits 2 -- ft930416_0325_0950G301770M.fits 3 -- ft930416_0325_0950G302370M.fits 4 -- ft930416_0325_0950G302970M.fits Merging binary extension #: 2 1 -- ft930416_0325_0950G300870M.fits 2 -- ft930416_0325_0950G301770M.fits 3 -- ft930416_0325_0950G302370M.fits 4 -- ft930416_0325_0950G302970M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000156 events
ft930416_0325_0950G300670H.fits ft930416_0325_0950G301570H.fits ft930416_0325_0950G302170H.fits ft930416_0325_0950G302770H.fits-> Ignoring the following files containing 000000074 events
ft930416_0325_0950G302670H.fits-> Ignoring the following files containing 000000071 events
ft930416_0325_0950G302570H.fits-> Ignoring the following files containing 000000059 events
ft930416_0325_0950G301970H.fits-> Ignoring the following files containing 000000057 events
ft930416_0325_0950G300270M.fits ft930416_0325_0950G301170M.fits-> Ignoring the following files containing 000000047 events
ft930416_0325_0950G302070H.fits-> Ignoring the following files containing 000000046 events
ft930416_0325_0950G300570H.fits-> Ignoring the following files containing 000000041 events
ft930416_0325_0950G300470H.fits-> Ignoring the following files containing 000000004 events
ft930416_0325_0950G301470H.fits-> Ignoring the following files containing 000000004 events
ft930416_0325_0950G301370H.fits-> Collecting SIS0 event files by mode
SIS0SORTCODE:LO:Start program SIS0SORTCODE:LO:End program-> Standard Error Output From STOOL sis0sortsplit:
SIS0SORTSPLIT:LO:Start program SIS0SORTSPLIT:LO:s000101h.prelist merge count = 3 photon cnt = 127629 SIS0SORTSPLIT:LO:s000202h.prelist merge count = 1 photon cnt = 92004 SIS0SORTSPLIT:LO:s000302m.prelist merge count = 7 photon cnt = 219041 SIS0SORTSPLIT:LO:s000402m.prelist merge count = 1 photon cnt = 391 SIS0SORTSPLIT:LO:s000502m.prelist merge count = 1 photon cnt = 19 SIS0SORTSPLIT:LO:Total filenames split = 13 SIS0SORTSPLIT:LO:Total split file cnt = 5 SIS0SORTSPLIT:LO:End program-> Creating ad10012010s000102m.unf
---- cmerge: version 1.5 ---- A total of 7 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950S000202M.fits 2 -- ft930416_0325_0950S000602M.fits 3 -- ft930416_0325_0950S000802M.fits 4 -- ft930416_0325_0950S001002M.fits 5 -- ft930416_0325_0950S001402M.fits 6 -- ft930416_0325_0950S001602M.fits 7 -- ft930416_0325_0950S002002M.fits Merging binary extension #: 2 1 -- ft930416_0325_0950S000202M.fits 2 -- ft930416_0325_0950S000602M.fits 3 -- ft930416_0325_0950S000802M.fits 4 -- ft930416_0325_0950S001002M.fits 5 -- ft930416_0325_0950S001402M.fits 6 -- ft930416_0325_0950S001602M.fits 7 -- ft930416_0325_0950S002002M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad10012010s000201h.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950S000401H.fits 2 -- ft930416_0325_0950S001201H.fits 3 -- ft930416_0325_0950S001801H.fits Merging binary extension #: 2 1 -- ft930416_0325_0950S000401H.fits 2 -- ft930416_0325_0950S001201H.fits 3 -- ft930416_0325_0950S001801H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft930416_0325_0950S000902H.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950S000902H.fits Merging binary extension #: 2 1 -- ft930416_0325_0950S000902H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000391 events
ft930416_0325_0950S001502M.fits-> Ignoring the following files containing 000000019 events
ft930416_0325_0950S000702M.fits-> Collecting SIS1 event files by mode
SIS1SORTCODE:LO:Start program SIS1SORTCODE:LO:End program-> Standard Error Output From STOOL sis1sortsplit:
SIS1SORTSPLIT:LO:Start program SIS1SORTSPLIT:LO:s100101h.prelist merge count = 3 photon cnt = 122734 SIS1SORTSPLIT:LO:s100202h.prelist merge count = 1 photon cnt = 89100 SIS1SORTSPLIT:LO:s100302m.prelist merge count = 1 photon cnt = 342 SIS1SORTSPLIT:LO:s100402m.prelist merge count = 7 photon cnt = 240752 SIS1SORTSPLIT:LO:s100502m.prelist merge count = 1 photon cnt = 23 SIS1SORTSPLIT:LO:Total filenames split = 13 SIS1SORTSPLIT:LO:Total split file cnt = 5 SIS1SORTSPLIT:LO:End program-> Creating ad10012010s100102m.unf
---- cmerge: version 1.5 ---- A total of 7 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950S100202M.fits 2 -- ft930416_0325_0950S100502M.fits 3 -- ft930416_0325_0950S100702M.fits 4 -- ft930416_0325_0950S100902M.fits 5 -- ft930416_0325_0950S101202M.fits 6 -- ft930416_0325_0950S101402M.fits 7 -- ft930416_0325_0950S101702M.fits Merging binary extension #: 2 1 -- ft930416_0325_0950S100202M.fits 2 -- ft930416_0325_0950S100502M.fits 3 -- ft930416_0325_0950S100702M.fits 4 -- ft930416_0325_0950S100902M.fits 5 -- ft930416_0325_0950S101202M.fits 6 -- ft930416_0325_0950S101402M.fits 7 -- ft930416_0325_0950S101702M.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Creating ad10012010s100201h.unf
---- cmerge: version 1.5 ---- A total of 3 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950S100301H.fits 2 -- ft930416_0325_0950S101001H.fits 3 -- ft930416_0325_0950S101501H.fits Merging binary extension #: 2 1 -- ft930416_0325_0950S100301H.fits 2 -- ft930416_0325_0950S101001H.fits 3 -- ft930416_0325_0950S101501H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Checking ft930416_0325_0950S100802H.fits
---- cmerge: version 1.5 ---- A total of 1 fits files ...... Sorting files using KEY: TSTART ... Checking GTI overlap in input files ... Merging binary extension #: 1 1 -- ft930416_0325_0950S100802H.fits Merging binary extension #: 2 1 -- ft930416_0325_0950S100802H.fits Checking the output file ... Extention # 1 ...... OK Extention # 2 ...... OK The program appears to have finished successfully!-> Ignoring the following files containing 000000342 events
ft930416_0325_0950S101302M.fits-> Ignoring the following files containing 000000023 events
ft930416_0325_0950S100602M.fits-> Tar-ing together the leftover raw files
a ft930416_0325_0950G200270M.fits 40K a ft930416_0325_0950G200470H.fits 40K a ft930416_0325_0950G200570H.fits 40K a ft930416_0325_0950G200670H.fits 40K a ft930416_0325_0950G201170M.fits 40K a ft930416_0325_0950G201370H.fits 40K a ft930416_0325_0950G201470H.fits 40K a ft930416_0325_0950G201570H.fits 40K a ft930416_0325_0950G201970H.fits 40K a ft930416_0325_0950G202070H.fits 40K a ft930416_0325_0950G202170H.fits 40K a ft930416_0325_0950G202570H.fits 40K a ft930416_0325_0950G202670H.fits 40K a ft930416_0325_0950G202770H.fits 40K a ft930416_0325_0950G300270M.fits 40K a ft930416_0325_0950G300470H.fits 40K a ft930416_0325_0950G300570H.fits 40K a ft930416_0325_0950G300670H.fits 40K a ft930416_0325_0950G301170M.fits 40K a ft930416_0325_0950G301370H.fits 40K a ft930416_0325_0950G301470H.fits 40K a ft930416_0325_0950G301570H.fits 40K a ft930416_0325_0950G301970H.fits 40K a ft930416_0325_0950G302070H.fits 40K a ft930416_0325_0950G302170H.fits 40K a ft930416_0325_0950G302570H.fits 40K a ft930416_0325_0950G302670H.fits 40K a ft930416_0325_0950G302770H.fits 40K a ft930416_0325_0950S000702M.fits 40K a ft930416_0325_0950S001502M.fits 51K a ft930416_0325_0950S100602M.fits 40K a ft930416_0325_0950S101302M.fits 48K-> Checking OBJECT keywords in HK and event files
temp2gain v4.2 opening ft930416_0325.0950 'ft930416_0325.0950' is successfully opened Data Start Time is 9084314.12 (930416 032514) Time Margin 2.0 sec included Sync error detected in 1014 th SF Sync error detected in 1027 th SF Sync error detected in 1028 th SF Sync error detected in 1030 th SF Sync error detected in 1035 th SF Sync error detected in 1036 th SF Sync error detected in 1037 th SF Sync error detected in 2855 th SF Sync error detected in 2856 th SF Sync error detected in 2857 th SF Sync error detected in 2858 th SF 'ft930416_0325.0950' EOF detected, sf=3992 Data End Time is 9107406.04 (930416 095006) Gain History is written in ft930416_0325_0950.ghf-> Checking if column CAL_START in ft930416_0325_0950.ghf[1] is in order
Time column is TIME ORDERED-> Checking if column CAL_STOP in ft930416_0325_0950.ghf[1] is in order
Time column is TIME ORDERED
ASCALIN_V0.9t-> Checking if ad10012010g200270m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010g200370m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010g300170h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010g300270m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010g300370m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s000102m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s000201h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s000202h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s000212h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s000302h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s100102m.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s100201h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s100202h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s100212h.unf is covered by attitude file
ASCALIN_V0.9t-> Checking if ad10012010s100302h.unf is covered by attitude file
ASCALIN_V0.9t
Date and time are: 93/ 4/16 3:25 mjd=49093.142361 Orbit file name is ./frf.orbit.201 Epoch of Orbital Elements: 1993/4/13 0:0:0 Rigidity Data File: ./rigidity.data.1.23 Attitude FRF: fa930416_0325.0950 S0-HK file: ft930416_0325_0950S0HK.fits S1-HK file: ft930416_0325_0950S1HK.fits G2-HK file: ft930416_0325_0950G2HK.fits G3-HK file: ft930416_0325_0950G3HK.fits output FITS File: ft930416_0325_0950.mkf Total 722 Data bins were processed.-> Checking if column TIME in ft930416_0325_0950.mkf is in order
Time column is TIME ORDERED-> Calculating dead time values for filter file
The sum of the selected column is 5430.3944 The mean of the selected column is 28.581023 The standard deviation of the selected column is 12.770346 The minimum of selected column is 11.687543 The maximum of selected column is 117.90667 The number of points used in calculation is 190-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 3119.8862 The mean of the selected column is 31.198862 The standard deviation of the selected column is 15.143944 The minimum of selected column is 15.218805 The maximum of selected column is 118.00042 The number of points used in calculation is 100-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2170.0080 The mean of the selected column is 542.50200 The standard deviation of the selected column is 586.19125 The minimum of selected column is 34.812626 The maximum of selected column is 1155.4105 The number of points used in calculation is 4-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 6434.3981 The mean of the selected column is 33.865253 The standard deviation of the selected column is 30.119470 The minimum of selected column is 9.3437834 The maximum of selected column is 318.50119 The number of points used in calculation is 190-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>0.0 && S0_PIXL0<66.8 )&& (S0_PIXL1>0.0 && S0_PIXL1<76.6 )&& (S0_PIXL2>0.0 && S0_PIXL2<2301 )&& (S0_PIXL3>0.0 && S0_PIXL3<124.2 ) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>64)) &&((T_SAA <0)||(T_SAA >64))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.15E+05 219041 1111 Processing file: /data/data17/seq_proc/10012010.008/ad10012010s000102m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 212306 602 0 211704 0 0 Writing events file 602 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 212306 602 0 211704 0 0 in 20.01 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data17/seq_proc/10012010.008/screen_in_event.xsl reading data file: /data/data17/seq_proc/10012010.008/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 602 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 0 0 cleaning chip # 1 Hot pixels & counts : 0 0 cleaning chip # 2 Hot pixels & counts : 0 0 cleaning chip # 3 Hot pixels & counts : 0 0 Number of pixels rejected : 0 Number of (internal) image counts : 602 Number of image cts rejected (N, %) : 0 0.0000000 By chip : 0 1 2 3 Pixels rejected : 0 0 0 0 Image counts : 160 235 126 81 Image cts rejected: 0 0 0 0 Image cts rej (%) : 0.00 0.00 0.00 0.00 filtering data... Total counts : 160 235 126 81 Total cts rejected: 0 0 0 0 Total cts rej (%) : 0.00 0.00 0.00 0.00 Number of clean counts accepted : 602 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 0 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010s000102m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10012010s000102m.evt use_events=no Wrote cleaned events file to ad10012010s000102m.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Skipping ad10012010s000201h.unf because of mode
The sum of the selected column is 2169.5079 The mean of the selected column is 21.695079 The standard deviation of the selected column is 6.1650161 The minimum of selected column is 10.531287 The maximum of selected column is 38.250137 The number of points used in calculation is 100-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2456.9568 The mean of the selected column is 24.569568 The standard deviation of the selected column is 6.2038788 The minimum of selected column is 13.406298 The maximum of selected column is 46.406418 The number of points used in calculation is 100-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2650.8224 The mean of the selected column is 28.503467 The standard deviation of the selected column is 71.457863 The minimum of selected column is 7.8437786 The maximum of selected column is 704.65912 The number of points used in calculation is 93-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>3.2 && S0_PIXL0<40.1 )&& (S0_PIXL1>5.9 && S0_PIXL1<43.1 )&& (S0_PIXL2>0)&& (S0_PIXL3>0.0 && S0_PIXL3<242.8 ) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>64)) &&((T_SAA <0)||(T_SAA >64))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.34E+04 96535 1111 Processing file: /data/data17/seq_proc/10012010.008/ad10012010s000202h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 93434 1918 0 91516 0 0 Writing events file 1918 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 93434 1918 0 91516 0 0 in 65.95 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data17/seq_proc/10012010.008/screen_in_event.xsl reading data file: /data/data17/seq_proc/10012010.008/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 1918 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 58 227 cleaning chip # 1 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 10 38 cleaning chip # 2 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 2 8 cleaning chip # 3 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 7 25 Number of pixels rejected : 77 Number of (internal) image counts : 1918 Number of image cts rejected (N, %) : 298 15.5370178 By chip : 0 1 2 3 Pixels rejected : 58 10 2 7 Image counts : 364 534 850 170 Image cts rejected: 227 38 8 25 Image cts rej (%) : 62.36 7.12 0.94 14.71 filtering data... Total counts : 364 534 850 170 Total cts rejected: 227 38 8 25 Total cts rej (%) : 62.36 7.12 0.94 14.71 Number of clean counts accepted : 1620 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 77 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010s000202h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10012010s000202h.evt use_events=no Wrote cleaned events file to ad10012010s000202h.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad10012010s000212h.unf into ad10012010s000212h.evt
The sum of the selected column is 2169.5079 The mean of the selected column is 21.695079 The standard deviation of the selected column is 6.1650161 The minimum of selected column is 10.531287 The maximum of selected column is 38.250137 The number of points used in calculation is 100-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2456.9568 The mean of the selected column is 24.569568 The standard deviation of the selected column is 6.2038788 The minimum of selected column is 13.406298 The maximum of selected column is 46.406418 The number of points used in calculation is 100-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2650.8224 The mean of the selected column is 28.503467 The standard deviation of the selected column is 71.457863 The minimum of selected column is 7.8437786 The maximum of selected column is 704.65912 The number of points used in calculation is 93-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>3.2 && S0_PIXL0<40.1 )&& (S0_PIXL1>5.9 && S0_PIXL1<43.1 )&& (S0_PIXL2>0)&& (S0_PIXL3>0.0 && S0_PIXL3<242.8 ) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>64)) &&((T_SAA <0)||(T_SAA >64))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.34E+04 102106 1111 Processing file: /data/data17/seq_proc/10012010.008/ad10012010s000212h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 93781 1925 0 91856 0 0 Writing events file 1925 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 93781 1925 0 91856 0 0 in 65.95 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data17/seq_proc/10012010.008/screen_in_event.xsl reading data file: /data/data17/seq_proc/10012010.008/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 1925 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 58 227 cleaning chip # 1 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 10 38 cleaning chip # 2 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 2 8 cleaning chip # 3 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 7 25 Number of pixels rejected : 77 Number of (internal) image counts : 1925 Number of image cts rejected (N, %) : 298 15.4805193 By chip : 0 1 2 3 Pixels rejected : 58 10 2 7 Image counts : 365 535 854 171 Image cts rejected: 227 38 8 25 Image cts rej (%) : 62.19 7.10 0.94 14.62 filtering data... Total counts : 365 535 854 171 Total cts rejected: 227 38 8 25 Total cts rej (%) : 62.19 7.10 0.94 14.62 Number of clean counts accepted : 1627 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 77 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010s000212h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-SIS0-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT2 > extract events !screen:ASCA-SIS0-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT2 > save clean outfile=ad10012010s000212h.evt use_events=no Wrote cleaned events file to ad10012010s000212h.evt !screen:ASCA-SIS0-BRIGHT2 > exit save_session=no-> Filtering ad10012010s000302h.unf into ad10012010s000302h.evt
The sum of the selected column is 1434.6927 The mean of the selected column is 23.140204 The standard deviation of the selected column is 7.6980029 The minimum of selected column is 10.750039 The maximum of selected column is 44.968910 The number of points used in calculation is 62-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 1587.7245 The mean of the selected column is 25.608459 The standard deviation of the selected column is 7.2862172 The minimum of selected column is 14.875055 The maximum of selected column is 43.500156 The number of points used in calculation is 62-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 6704.1494 The mean of the selected column is 109.90409 The standard deviation of the selected column is 113.94822 The minimum of selected column is 55.468948 The maximum of selected column is 652.31488 The number of points used in calculation is 61-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 1529.9430 The mean of the selected column is 24.676500 The standard deviation of the selected column is 12.322795 The minimum of selected column is 9.0937834 The maximum of selected column is 72.875259 The number of points used in calculation is 62-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S0_PIXL0>0 && S0_PIXL0<46.2 )&& (S0_PIXL1>3.7 && S0_PIXL1<47.4 )&& (S0_PIXL2>0.0 && S0_PIXL2<451.7 )&& (S0_PIXL3>0.0 && S0_PIXL3<61.6 ) ) &&( (S0_SATF0<1) ||(S0_SATF0>1)) &&( (S0_SATF1<1) ||(S0_SATF1>1)) &&( (S0_SATF2<1) ||(S0_SATF2>1)) &&( (S0_SATF3<1) ||(S0_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>64)) &&((T_SAA <0)||(T_SAA >64))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.26E+04 92004 1111 Processing file: /data/data17/seq_proc/10012010.008/ad10012010s000302h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 86758 78375 0 8383 0 0 Writing events file 78375 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 86758 78375 0 8383 0 0 in 1821.97 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data17/seq_proc/10012010.008/screen_in_event.xsl reading data file: /data/data17/seq_proc/10012010.008/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 78375 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 72 7339 Flickering pixels iter, pixels & cnts : 1 20 220 cleaning chip # 1 Hot pixels & counts : 11 1116 Flickering pixels iter, pixels & cnts : 1 22 465 cleaning chip # 2 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 75 1244 cleaning chip # 3 Hot pixels & counts : 14 1041 Flickering pixels iter, pixels & cnts : 1 26 192 Number of pixels rejected : 240 Number of (internal) image counts : 78375 Number of image cts rejected (N, %) : 11617 14.8223286 By chip : 0 1 2 3 Pixels rejected : 92 33 75 40 Image counts : 9745 14250 49882 4498 Image cts rejected: 7559 1581 1244 1233 Image cts rej (%) : 77.57 11.09 2.49 27.41 filtering data... Total counts : 9745 14250 49882 4498 Total cts rejected: 7559 1581 1244 1233 Total cts rej (%) : 77.57 11.09 2.49 27.41 Number of clean counts accepted : 66758 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 240 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010s000302h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-SIS0-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS0-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS0-BRIGHT > extract events !screen:ASCA-SIS0-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS0-BRIGHT > save clean outfile=ad10012010s000302h.evt use_events=no Wrote cleaned events file to ad10012010s000302h.evt !screen:ASCA-SIS0-BRIGHT > exit save_session=no-> Filtering ad10012010s100102m.unf into ad10012010s100102m.evt
The sum of the selected column is 8400.5612 The mean of the selected column is 44.213480 The standard deviation of the selected column is 23.600241 The minimum of selected column is 15.000053 The maximum of selected column is 229.28207 The number of points used in calculation is 190-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 7393.7141 The mean of the selected column is 38.914285 The standard deviation of the selected column is 22.198438 The minimum of selected column is 11.781294 The maximum of selected column is 226.93831 The number of points used in calculation is 190-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 7167.6506 The mean of the selected column is 45.364877 The standard deviation of the selected column is 22.753569 The minimum of selected column is 10.437535 The maximum of selected column is 201.31322 The number of points used in calculation is 158-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0)&& (S1_PIXL1>0.0 && S1_PIXL1<115 )&& (S1_PIXL2>0.0 && S1_PIXL2<105.5 )&& (S1_PIXL3>0.0 && S1_PIXL3<113.6 ) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>64)) &&((T_SAA <0)||(T_SAA >64))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.15E+05 240752 1111 Processing file: /data/data17/seq_proc/10012010.008/ad10012010s100102m.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 231410 1048 0 230362 0 0 Writing events file 1048 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 231410 1048 0 230362 0 0 in 40.09 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data17/seq_proc/10012010.008/screen_in_event.xsl reading data file: /data/data17/seq_proc/10012010.008/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 1048 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 0 0 cleaning chip # 1 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 22 87 cleaning chip # 2 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 18 68 cleaning chip # 3 Hot pixels & counts : 0 0 Number of pixels rejected : 40 Number of (internal) image counts : 1048 Number of image cts rejected (N, %) : 155 14.7900763 By chip : 0 1 2 3 Pixels rejected : 0 22 18 0 Image counts : 218 370 219 241 Image cts rejected: 0 87 68 0 Image cts rej (%) : 0.00 23.51 31.05 0.00 filtering data... Total counts : 218 370 219 241 Total cts rejected: 0 87 68 0 Total cts rej (%) : 0.00 23.51 31.05 0.00 Number of clean counts accepted : 893 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 40 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010s100102m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10012010s100102m.evt use_events=no Wrote cleaned events file to ad10012010s100102m.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Skipping ad10012010s100201h.unf because of mode
The sum of the selected column is 3092.6362 The mean of the selected column is 30.926362 The standard deviation of the selected column is 12.672334 The minimum of selected column is 11.843807 The maximum of selected column is 99.656609 The number of points used in calculation is 100-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2568.9468 The mean of the selected column is 25.689468 The standard deviation of the selected column is 10.083923 The minimum of selected column is 10.187537 The maximum of selected column is 65.093987 The number of points used in calculation is 100-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 3337.3870 The mean of the selected column is 33.373870 The standard deviation of the selected column is 11.049686 The minimum of selected column is 14.593804 The maximum of selected column is 61.687721 The number of points used in calculation is 100-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0)&& (S1_PIXL1>0.0 && S1_PIXL1<68.9 )&& (S1_PIXL2>0.0 && S1_PIXL2<55.9 )&& (S1_PIXL3>0.2 && S1_PIXL3<66.5 ) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>64)) &&((T_SAA <0)||(T_SAA >64))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.34E+04 100898 1111 Processing file: /data/data17/seq_proc/10012010.008/ad10012010s100202h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 96324 1132 0 95192 0 0 Writing events file 1132 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 96324 1132 0 95192 0 0 in 43.96 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data17/seq_proc/10012010.008/screen_in_event.xsl reading data file: /data/data17/seq_proc/10012010.008/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 1132 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 0 0 cleaning chip # 1 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 21 83 cleaning chip # 2 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 18 68 cleaning chip # 3 Hot pixels & counts : 0 0 Number of pixels rejected : 39 Number of (internal) image counts : 1132 Number of image cts rejected (N, %) : 151 13.3392229 By chip : 0 1 2 3 Pixels rejected : 0 21 18 0 Image counts : 353 345 210 224 Image cts rejected: 0 83 68 0 Image cts rej (%) : 0.00 24.06 32.38 0.00 filtering data... Total counts : 353 345 210 224 Total cts rejected: 0 83 68 0 Total cts rej (%) : 0.00 24.06 32.38 0.00 Number of clean counts accepted : 981 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 39 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010s100202h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10012010s100202h.evt use_events=no Wrote cleaned events file to ad10012010s100202h.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad10012010s100212h.unf into ad10012010s100212h.evt
The sum of the selected column is 3092.6362 The mean of the selected column is 30.926362 The standard deviation of the selected column is 12.672334 The minimum of selected column is 11.843807 The maximum of selected column is 99.656609 The number of points used in calculation is 100-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2568.9468 The mean of the selected column is 25.689468 The standard deviation of the selected column is 10.083923 The minimum of selected column is 10.187537 The maximum of selected column is 65.093987 The number of points used in calculation is 100-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 3337.3870 The mean of the selected column is 33.373870 The standard deviation of the selected column is 11.049686 The minimum of selected column is 14.593804 The maximum of selected column is 61.687721 The number of points used in calculation is 100-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>0)&& (S1_PIXL1>0.0 && S1_PIXL1<68.9 )&& (S1_PIXL2>0.0 && S1_PIXL2<55.9 )&& (S1_PIXL3>0.2 && S1_PIXL3<66.5 ) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>64)) &&((T_SAA <0)||(T_SAA >64))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.34E+04 106612 1111 Processing file: /data/data17/seq_proc/10012010.008/ad10012010s100212h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 96589 1137 0 95452 0 0 Writing events file 1137 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 96589 1137 0 95452 0 0 in 43.96 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data17/seq_proc/10012010.008/screen_in_event.xsl reading data file: /data/data17/seq_proc/10012010.008/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 1137 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 0 0 cleaning chip # 1 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 21 83 cleaning chip # 2 Hot pixels & counts : 0 0 Flickering pixels iter, pixels & cnts : 1 18 68 cleaning chip # 3 Hot pixels & counts : 0 0 Number of pixels rejected : 39 Number of (internal) image counts : 1137 Number of image cts rejected (N, %) : 151 13.2805634 By chip : 0 1 2 3 Pixels rejected : 0 21 18 0 Image counts : 355 347 210 225 Image cts rejected: 0 83 68 0 Image cts rej (%) : 0.00 23.92 32.38 0.00 filtering data... Total counts : 355 347 210 225 Total cts rejected: 0 83 68 0 Total cts rej (%) : 0.00 23.92 32.38 0.00 Number of clean counts accepted : 986 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 39 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010s100212h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-SIS1-BRIGHT2 > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT2 > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT2 > extract events !screen:ASCA-SIS1-BRIGHT2 > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT2 > save clean outfile=ad10012010s100212h.evt use_events=no Wrote cleaned events file to ad10012010s100212h.evt !screen:ASCA-SIS1-BRIGHT2 > exit save_session=no-> Filtering ad10012010s100302h.unf into ad10012010s100302h.evt
The sum of the selected column is 3759.3886 The mean of the selected column is 61.629321 The standard deviation of the selected column is 15.395364 The minimum of selected column is 43.437656 The maximum of selected column is 105.59412 The number of points used in calculation is 61-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2164.4453 The mean of the selected column is 34.910408 The standard deviation of the selected column is 19.403007 The minimum of selected column is 14.562552 The maximum of selected column is 109.46914 The number of points used in calculation is 62-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 1943.9758 The mean of the selected column is 31.354448 The standard deviation of the selected column is 13.077496 The minimum of selected column is 11.812544 The maximum of selected column is 67.937744 The number of points used in calculation is 62-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2410.1337 The mean of the selected column is 38.873124 The standard deviation of the selected column is 16.294400 The minimum of selected column is 16.312561 The maximum of selected column is 116.75042 The number of points used in calculation is 62-> Using the following selection criteria:
(SAA==0) &&(BR_EARTH>20) &&(ELV>10) &&(COR>6) &&(ACS==0) &&(ANG_DIST>0)&& (ANG_DIST<0.01) &&(FOV==0) && ( (S1_PIXL0>15.4 && S1_PIXL0<107.8 )&& (S1_PIXL1>0.0 && S1_PIXL1<93.1 )&& (S1_PIXL2>0.0 && S1_PIXL2<70.5 )&& (S1_PIXL3>0.0 && S1_PIXL3<87.7 ) ) &&( (S1_SATF0<1) ||(S1_SATF0>1)) &&( (S1_SATF1<1) ||(S1_SATF1>1)) &&( (S1_SATF2<1) ||(S1_SATF2>1)) &&( (S1_SATF3<1) ||(S1_SATF3>1)) &&((T_DY_NT<0)||(T_DY_NT>64)) &&((T_SAA <0)||(T_SAA >64))-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.26E+04 89100 1111 Processing file: /data/data17/seq_proc/10012010.008/ad10012010s100302h.unf EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/screen_work1001.xsl Total Good Bad: Region Time Phase Cut 83980 66613 0 17367 0 0 Writing events file 66613 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 83980 66613 0 17367 0 0 in 1849.97 seconds CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.631E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : T Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: /data/data17/seq_proc/10012010.008/screen_in_event.xsl reading data file: /data/data17/seq_proc/10012010.008/screen_out_event.xsl copying primary header to output file... making chip image... Total counts in chip images : 66613 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 5 575 Flickering pixels iter, pixels & cnts : 1 53 1368 cleaning chip # 1 Hot pixels & counts : 23 2487 Flickering pixels iter, pixels & cnts : 1 28 316 cleaning chip # 2 Hot pixels & counts : 20 2117 Flickering pixels iter, pixels & cnts : 1 26 265 cleaning chip # 3 Hot pixels & counts : 19 1781 Flickering pixels iter, pixels & cnts : 1 27 354 Number of pixels rejected : 201 Number of (internal) image counts : 66613 Number of image cts rejected (N, %) : 9263 13.9056940 By chip : 0 1 2 3 Pixels rejected : 58 51 46 46 Image counts : 38828 9123 6227 12435 Image cts rejected: 1943 2803 2382 2135 Image cts rej (%) : 5.00 30.72 38.25 17.17 filtering data... Total counts : 38828 9123 6227 12435 Total cts rejected: 1943 2803 2382 2135 Total cts rej (%) : 5.00 30.72 38.25 17.17 Number of clean counts accepted : 57350 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 201 updating NEVENTS keywords... closing data file... closing clean file... Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010s100302h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-SIS1-BRIGHT > select event "grade==0||grade==2||grade==3||grade==4" save_file=no !screen:ASCA-SIS1-BRIGHT > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-SIS1-BRIGHT > extract events !screen:ASCA-SIS1-BRIGHT > sisclean saoimage=no sis_plot=no clean=2 cellsize=5 log_prob=-5.24 bkg_thr=3 clean_phalow=0 clean_phahi=4095 !screen:ASCA-SIS1-BRIGHT > save clean outfile=ad10012010s100302h.evt use_events=no Wrote cleaned events file to ad10012010s100302h.evt !screen:ASCA-SIS1-BRIGHT > exit save_session=no-> Filtering ad10012010g200170h.unf into ad10012010g200170h.evt
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 174958 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.unf Total Good Bad: Region Time Phase Cut 174958 149955 11128 13875 0 0 Writing events file 149955 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 174958 149955 11128 13875 0 0 in 5193.99 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 149955 148513 1442 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010g200170h.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4 !screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS2-PH > extract events !screen:ASCA-GIS2-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS2-PH > save clean outfile=ad10012010g200170h.evt use_events=no !screen:ASCA-GIS2-PH > exit save_session=no-> Setting NEVENTS to 148513 in ad10012010g200170h.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 136308 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.unf Total Good Bad: Region Time Phase Cut 136308 90625 17311 28372 0 0 Writing events file 90625 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 136308 90625 17311 28372 0 0 in 6048.04 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 90625 89664 961 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010g200270m.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4 !screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS2-PH > extract events !screen:ASCA-GIS2-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS2-PH > save clean outfile=ad10012010g200270m.evt use_events=no !screen:ASCA-GIS2-PH > exit save_session=no-> Setting NEVENTS to 89664 in ad10012010g200270m.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G2_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.13E+03 1590 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.unf Total Good Bad: Region Time Phase Cut 1590 1422 167 1 0 0 Writing events file 1422 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1590 1422 167 1 0 0 in 96.00 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 1422 1410 12 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010g200370m.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4 !screen:ASCA-GIS2-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS2-PH > extract events !screen:ASCA-GIS2-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS2-PH > save clean outfile=ad10012010g200370m.evt use_events=no !screen:ASCA-GIS2-PH > exit save_session=no-> Setting NEVENTS to 1410 in ad10012010g200370m.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 156908 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.unf Total Good Bad: Region Time Phase Cut 156908 132855 12063 11990 0 0 Writing events file 132855 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 156908 132855 12063 11990 0 0 in 5193.99 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 132855 131848 1007 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010g300170h.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4 !screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS3-PH > extract events !screen:ASCA-GIS3-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS3-PH > save clean outfile=ad10012010g300170h.evt use_events=no !screen:ASCA-GIS3-PH > exit save_session=no-> Setting NEVENTS to 131848 in ad10012010g300170h.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 134921 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.unf Total Good Bad: Region Time Phase Cut 134921 88793 18560 27568 0 0 Writing events file 88793 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 134921 88793 18560 27568 0 0 in 6048.04 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 88793 87978 815 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010g300270m.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4 !screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS3-PH > extract events !screen:ASCA-GIS3-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS3-PH > save clean outfile=ad10012010g300270m.evt use_events=no !screen:ASCA-GIS3-PH > exit save_session=no-> Setting NEVENTS to 87978 in ad10012010g300270m.unf
(SAA==0)&& (COR>4)&& (G2_H0+G2_H2+G3_H0+G3_H2<45)&& (G2_H0+G2_H2+G3_H0+G3_H2<0.45*COR**2-13*COR+125)&& (RBM_CONT<100)&& (ELV>5)&& (ACS==0)&& (ANG_DIST>0)&& (ANG_DIST<0.01)&& (G3_L1>0)-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] screen Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.13E+03 1593 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.unf Total Good Bad: Region Time Phase Cut 1593 1416 172 5 0 0 Writing events file 1416 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1593 1416 172 5 0 0 in 96.00 seconds Infile # of rows Outfile # of rows # filtered ---------------- ----------------- ---------- 1416 1408 8 Command not found; type ? for a command listing !screen:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !screen:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !screen:ASCA > read events ad10012010g300370m.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !screen:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4 !screen:ASCA-GIS3-PH > select mkf "@criteria.tmp" data_dir=. ASCA_mkf_def_expr=ft*.mkf !screen:ASCA-GIS3-PH > extract events !screen:ASCA-GIS3-PH > gisclean Using table:/opt/local/ftools/ftools.4.0.c/SunOS_5.4_sparc/refdata/rti_gis_1024_040693.fits !screen:ASCA-GIS3-PH > save clean outfile=ad10012010g300370m.evt use_events=no !screen:ASCA-GIS3-PH > exit save_session=no-> Setting NEVENTS to 1408 in ad10012010g300370m.unf
-ANNULUS(128.5,128.5,192,81) -ELLIPSE(167.5,220,24.66,28.95,245.298)-> gis2_ano_on_flf_180295.fits already present in current directory
ASCAEXPO_V0.9b reading data file: ad10012010g200170h.evt reading gti ext: STDGTI reading cal file: gis2_ano_on_flf_180295.fits reading inst file: GIS2_REGION256_OFF.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6928 Mean RA/DEC/ROLL : 94.2620 9.1951 82.6928 Pnt RA/DEC/ROLL : 94.2424 9.1531 82.6928 Image rebin factor : 1 Attitude Records : 15710 GTI intervals : 7 Total GTI (secs) : 5193.992 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1398.9949951 1398.9949951 20 Percent Complete: Total/live time: 1398.9949951 1398.9949951 30 Percent Complete: Total/live time: 3057.9604492 3057.9604492 40 Percent Complete: Total/live time: 3057.9604492 3057.9604492 50 Percent Complete: Total/live time: 3650.9584961 3650.9584961 60 Percent Complete: Total/live time: 3650.9584961 3650.9584961 70 Percent Complete: Total/live time: 4041.4558105 4041.4558105 80 Percent Complete: Total/live time: 5193.9926758 5193.9926758 100 Percent Complete: Total/live time: 5193.9926758 5193.9926758 Number of attitude steps used: 11 Number of attitude steps avail: 11633 Mean RA/DEC pixel offset: -9.1778 -2.2470 writing expo file: ad10012010g200170h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010g200170h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010g200170h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 148513 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.evt Total Good Bad: Region Time Phase Cut 148513 148513 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 148513 148513 0 0 0 0 in 5193.99 seconds Image has 148513 counts for 28.59 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.evt Total Good Bad: Region Time Phase Cut 148513 87027 0 0 0 61486 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 148513 87027 0 0 0 61486 in 5193.99 seconds Image has 87027 counts for 16.76 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.evt Total Good Bad: Region Time Phase Cut 148513 62180 0 0 0 86333 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 148513 62180 0 0 0 86333 in 5193.99 seconds Image has 62180 counts for 11.97 counts/sec Command not found; type ? for a command listing !ad10012010g200170h:ASCA > !ad10012010g200170h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010g200170h:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010g200170h:ASCA > read events ad10012010g200170h.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010g200170h:ASCA-GIS2-PH > set image sky !ad10012010g200170h:ASCA-GIS2-PH > filter region corner_point.reg !ad10012010g200170h:ASCA-GIS2-PH > extract image !ad10012010g200170h:ASCA-GIS2-PH > save image outfile=ad10012010g200170h.img Wrote image to file ad10012010g200170h.img !ad10012010g200170h:ASCA-GIS2-PH > filter pha_cut 0 170 !ad10012010g200170h:ASCA-GIS2-PH > extract image !ad10012010g200170h:ASCA-GIS2-PH > save image outfile=ad10012010g200170h_lo.img Wrote image to file ad10012010g200170h_lo.img !ad10012010g200170h:ASCA-GIS2-PH > clear pha_cut !ad10012010g200170h:ASCA-GIS2-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad10012010g200170h:ASCA-GIS2-PH > extract image !ad10012010g200170h:ASCA-GIS2-PH > save image outfile=ad10012010g200170h_hi.img Wrote image to file ad10012010g200170h_hi.img !ad10012010g200170h:ASCA-GIS2-PH > exit save_session=no-> Generating exposure map ad10012010g200270m.expo
ASCAEXPO_V0.9b reading data file: ad10012010g200270m.evt reading gti ext: STDGTI reading cal file: gis2_ano_on_flf_180295.fits reading inst file: GIS2_REGION256_OFF.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6927 Mean RA/DEC/ROLL : 94.2630 9.1939 82.6927 Pnt RA/DEC/ROLL : 94.2429 9.1531 82.6927 Image rebin factor : 1 Attitude Records : 15710 GTI intervals : 10 Total GTI (secs) : 6048.038 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 707.9898071 707.9898071 20 Percent Complete: Total/live time: 1615.9844971 1615.9844971 30 Percent Complete: Total/live time: 3712.0341797 3712.0341797 40 Percent Complete: Total/live time: 3712.0341797 3712.0341797 50 Percent Complete: Total/live time: 3779.9750977 3779.9750977 60 Percent Complete: Total/live time: 3779.9750977 3779.9750977 70 Percent Complete: Total/live time: 4352.0341797 4352.0341797 80 Percent Complete: Total/live time: 5344.0380859 5344.0380859 90 Percent Complete: Total/live time: 6048.0380859 6048.0380859 100 Percent Complete: Total/live time: 6048.0380859 6048.0380859 Number of attitude steps used: 23 Number of attitude steps avail: 10496 Mean RA/DEC pixel offset: -9.6134 -2.6497 writing expo file: ad10012010g200270m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010g200270m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010g200270m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 89664 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.evt Total Good Bad: Region Time Phase Cut 89664 89664 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 89664 89664 0 0 0 0 in 6048.04 seconds Image has 89664 counts for 14.83 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.evt Total Good Bad: Region Time Phase Cut 89664 52346 0 0 0 37318 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 89664 52346 0 0 0 37318 in 6048.04 seconds Image has 52346 counts for 8.655 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.evt Total Good Bad: Region Time Phase Cut 89664 37736 0 0 0 51928 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 89664 37736 0 0 0 51928 in 6048.04 seconds Image has 37736 counts for 6.239 counts/sec Command not found; type ? for a command listing !ad10012010g200270m:ASCA > !ad10012010g200270m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010g200270m:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010g200270m:ASCA > read events ad10012010g200270m.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010g200270m:ASCA-GIS2-PH > set image sky !ad10012010g200270m:ASCA-GIS2-PH > filter region corner_point.reg !ad10012010g200270m:ASCA-GIS2-PH > extract image !ad10012010g200270m:ASCA-GIS2-PH > save image outfile=ad10012010g200270m.img Wrote image to file ad10012010g200270m.img !ad10012010g200270m:ASCA-GIS2-PH > filter pha_cut 0 170 !ad10012010g200270m:ASCA-GIS2-PH > extract image !ad10012010g200270m:ASCA-GIS2-PH > save image outfile=ad10012010g200270m_lo.img Wrote image to file ad10012010g200270m_lo.img !ad10012010g200270m:ASCA-GIS2-PH > clear pha_cut !ad10012010g200270m:ASCA-GIS2-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad10012010g200270m:ASCA-GIS2-PH > extract image !ad10012010g200270m:ASCA-GIS2-PH > save image outfile=ad10012010g200270m_hi.img Wrote image to file ad10012010g200270m_hi.img !ad10012010g200270m:ASCA-GIS2-PH > exit save_session=no-> Generating exposure map ad10012010g200370m.expo
ASCAEXPO_V0.9b reading data file: ad10012010g200370m.evt reading gti ext: STDGTI reading cal file: gis2_ano_on_flf_180295.fits reading inst file: GIS2_REGION256_OFF.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6924 Mean RA/DEC/ROLL : 94.2622 9.1951 82.6924 Pnt RA/DEC/ROLL : 94.2433 9.1519 82.6924 Image rebin factor : 1 Attitude Records : 15710 GTI intervals : 3 Total GTI (secs) : 96.000 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 15.9998951 15.9998951 20 Percent Complete: Total/live time: 31.9999428 31.9999428 30 Percent Complete: Total/live time: 31.9999428 31.9999428 40 Percent Complete: Total/live time: 47.9998322 47.9998322 50 Percent Complete: Total/live time: 63.9998856 63.9998856 60 Percent Complete: Total/live time: 63.9998856 63.9998856 70 Percent Complete: Total/live time: 79.9996872 79.9996872 80 Percent Complete: Total/live time: 79.9996872 79.9996872 90 Percent Complete: Total/live time: 95.9998322 95.9998322 100 Percent Complete: Total/live time: 95.9998322 95.9998322 Number of attitude steps used: 6 Number of attitude steps avail: 1932 Mean RA/DEC pixel offset: -8.2562 -2.1228 writing expo file: ad10012010g200370m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010g200370m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010g200370m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.96E+02 1410 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.evt Total Good Bad: Region Time Phase Cut 1410 1410 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1410 1410 0 0 0 0 in 96.00 seconds Image has 1410 counts for 14.69 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.evt Total Good Bad: Region Time Phase Cut 1410 834 0 0 0 576 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1410 834 0 0 0 576 in 96.00 seconds Image has 834 counts for 8.688 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.evt Total Good Bad: Region Time Phase Cut 1410 580 0 0 0 830 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1410 580 0 0 0 830 in 96.00 seconds Image has 580 counts for 6.042 counts/sec Command not found; type ? for a command listing !ad10012010g200370m:ASCA > !ad10012010g200370m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010g200370m:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010g200370m:ASCA > read events ad10012010g200370m.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010g200370m:ASCA-GIS2-PH > set image sky !ad10012010g200370m:ASCA-GIS2-PH > filter region corner_point.reg !ad10012010g200370m:ASCA-GIS2-PH > extract image !ad10012010g200370m:ASCA-GIS2-PH > save image outfile=ad10012010g200370m.img Wrote image to file ad10012010g200370m.img !ad10012010g200370m:ASCA-GIS2-PH > filter pha_cut 0 170 !ad10012010g200370m:ASCA-GIS2-PH > extract image !ad10012010g200370m:ASCA-GIS2-PH > save image outfile=ad10012010g200370m_lo.img Wrote image to file ad10012010g200370m_lo.img !ad10012010g200370m:ASCA-GIS2-PH > clear pha_cut !ad10012010g200370m:ASCA-GIS2-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad10012010g200370m:ASCA-GIS2-PH > extract image !ad10012010g200370m:ASCA-GIS2-PH > save image outfile=ad10012010g200370m_hi.img Wrote image to file ad10012010g200370m_hi.img !ad10012010g200370m:ASCA-GIS2-PH > exit save_session=no-> Generating exposure map ad10012010g300170h.expo
-ANNULUS(128.5,128.5,192,73) -ELLIPSE(217,95,21.56,25.92,169.216)-> gis3_ano_on_flf_180295.fits already present in current directory
ASCAEXPO_V0.9b reading data file: ad10012010g300170h.evt reading gti ext: STDGTI reading cal file: gis3_ano_on_flf_180295.fits reading inst file: GIS3_REGION256_OFF.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6919 Mean RA/DEC/ROLL : 94.2563 9.1709 82.6919 Pnt RA/DEC/ROLL : 94.2481 9.1773 82.6919 Image rebin factor : 1 Attitude Records : 15710 GTI intervals : 7 Total GTI (secs) : 5193.992 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1398.9949951 1398.9949951 20 Percent Complete: Total/live time: 1398.9949951 1398.9949951 30 Percent Complete: Total/live time: 3057.9604492 3057.9604492 40 Percent Complete: Total/live time: 3057.9604492 3057.9604492 50 Percent Complete: Total/live time: 3650.9584961 3650.9584961 60 Percent Complete: Total/live time: 3650.9584961 3650.9584961 70 Percent Complete: Total/live time: 4041.4558105 4041.4558105 80 Percent Complete: Total/live time: 5193.9926758 5193.9926758 100 Percent Complete: Total/live time: 5193.9926758 5193.9926758 Number of attitude steps used: 11 Number of attitude steps avail: 11633 Mean RA/DEC pixel offset: 1.8028 -1.1562 writing expo file: ad10012010g300170h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010g300170h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010g300170h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 131848 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.evt Total Good Bad: Region Time Phase Cut 131848 131848 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 131848 131848 0 0 0 0 in 5193.99 seconds Image has 131848 counts for 25.38 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.evt Total Good Bad: Region Time Phase Cut 131848 77111 0 0 0 54737 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 131848 77111 0 0 0 54737 in 5193.99 seconds Image has 77111 counts for 14.85 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.evt Total Good Bad: Region Time Phase Cut 131848 55338 0 0 0 76510 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 131848 55338 0 0 0 76510 in 5193.99 seconds Image has 55338 counts for 10.65 counts/sec Command not found; type ? for a command listing !ad10012010g300170h:ASCA > !ad10012010g300170h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010g300170h:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010g300170h:ASCA > read events ad10012010g300170h.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010g300170h:ASCA-GIS3-PH > set image sky !ad10012010g300170h:ASCA-GIS3-PH > filter region corner_point.reg !ad10012010g300170h:ASCA-GIS3-PH > extract image !ad10012010g300170h:ASCA-GIS3-PH > save image outfile=ad10012010g300170h.img Wrote image to file ad10012010g300170h.img !ad10012010g300170h:ASCA-GIS3-PH > filter pha_cut 0 170 !ad10012010g300170h:ASCA-GIS3-PH > extract image !ad10012010g300170h:ASCA-GIS3-PH > save image outfile=ad10012010g300170h_lo.img Wrote image to file ad10012010g300170h_lo.img !ad10012010g300170h:ASCA-GIS3-PH > clear pha_cut !ad10012010g300170h:ASCA-GIS3-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad10012010g300170h:ASCA-GIS3-PH > extract image !ad10012010g300170h:ASCA-GIS3-PH > save image outfile=ad10012010g300170h_hi.img Wrote image to file ad10012010g300170h_hi.img !ad10012010g300170h:ASCA-GIS3-PH > exit save_session=no-> Generating exposure map ad10012010g300270m.expo
ASCAEXPO_V0.9b reading data file: ad10012010g300270m.evt reading gti ext: STDGTI reading cal file: gis3_ano_on_flf_180295.fits reading inst file: GIS3_REGION256_OFF.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6919 Mean RA/DEC/ROLL : 94.2574 9.1697 82.6919 Pnt RA/DEC/ROLL : 94.2486 9.1773 82.6919 Image rebin factor : 1 Attitude Records : 15710 GTI intervals : 10 Total GTI (secs) : 6048.038 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 707.9898071 707.9898071 20 Percent Complete: Total/live time: 1615.9844971 1615.9844971 30 Percent Complete: Total/live time: 3712.0341797 3712.0341797 40 Percent Complete: Total/live time: 3712.0341797 3712.0341797 50 Percent Complete: Total/live time: 3779.9750977 3779.9750977 60 Percent Complete: Total/live time: 3779.9750977 3779.9750977 70 Percent Complete: Total/live time: 4352.0341797 4352.0341797 80 Percent Complete: Total/live time: 5344.0380859 5344.0380859 90 Percent Complete: Total/live time: 6048.0380859 6048.0380859 100 Percent Complete: Total/live time: 6048.0380859 6048.0380859 Number of attitude steps used: 23 Number of attitude steps avail: 10496 Mean RA/DEC pixel offset: 1.9401 -1.5019 writing expo file: ad10012010g300270m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010g300270m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010g300270m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 87978 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.evt Total Good Bad: Region Time Phase Cut 87978 87978 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 87978 87978 0 0 0 0 in 6048.04 seconds Image has 87978 counts for 14.55 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.evt Total Good Bad: Region Time Phase Cut 87978 51430 0 0 0 36548 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 87978 51430 0 0 0 36548 in 6048.04 seconds Image has 51430 counts for 8.504 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.evt Total Good Bad: Region Time Phase Cut 87978 36948 0 0 0 51030 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 87978 36948 0 0 0 51030 in 6048.04 seconds Image has 36948 counts for 6.109 counts/sec Command not found; type ? for a command listing !ad10012010g300270m:ASCA > !ad10012010g300270m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010g300270m:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010g300270m:ASCA > read events ad10012010g300270m.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010g300270m:ASCA-GIS3-PH > set image sky !ad10012010g300270m:ASCA-GIS3-PH > filter region corner_point.reg !ad10012010g300270m:ASCA-GIS3-PH > extract image !ad10012010g300270m:ASCA-GIS3-PH > save image outfile=ad10012010g300270m.img Wrote image to file ad10012010g300270m.img !ad10012010g300270m:ASCA-GIS3-PH > filter pha_cut 0 170 !ad10012010g300270m:ASCA-GIS3-PH > extract image !ad10012010g300270m:ASCA-GIS3-PH > save image outfile=ad10012010g300270m_lo.img Wrote image to file ad10012010g300270m_lo.img !ad10012010g300270m:ASCA-GIS3-PH > clear pha_cut !ad10012010g300270m:ASCA-GIS3-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad10012010g300270m:ASCA-GIS3-PH > extract image !ad10012010g300270m:ASCA-GIS3-PH > save image outfile=ad10012010g300270m_hi.img Wrote image to file ad10012010g300270m_hi.img !ad10012010g300270m:ASCA-GIS3-PH > exit save_session=no-> Generating exposure map ad10012010g300370m.expo
ASCAEXPO_V0.9b reading data file: ad10012010g300370m.evt reading gti ext: STDGTI reading cal file: gis3_ano_on_flf_180295.fits reading inst file: GIS3_REGION256_OFF.4_regionmap.tmp making an inst map... multiply inst map... reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6915 Mean RA/DEC/ROLL : 94.2565 9.1709 82.6915 Pnt RA/DEC/ROLL : 94.2489 9.1761 82.6915 Image rebin factor : 1 Attitude Records : 15710 GTI intervals : 3 Total GTI (secs) : 96.000 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 15.9998951 15.9998951 20 Percent Complete: Total/live time: 31.9999428 31.9999428 30 Percent Complete: Total/live time: 31.9999428 31.9999428 40 Percent Complete: Total/live time: 47.9998322 47.9998322 50 Percent Complete: Total/live time: 63.9998856 63.9998856 60 Percent Complete: Total/live time: 63.9998856 63.9998856 70 Percent Complete: Total/live time: 79.9996872 79.9996872 80 Percent Complete: Total/live time: 79.9996872 79.9996872 90 Percent Complete: Total/live time: 95.9998322 95.9998322 100 Percent Complete: Total/live time: 95.9998322 95.9998322 Number of attitude steps used: 6 Number of attitude steps avail: 1932 Mean RA/DEC pixel offset: 1.8093 -1.1229 writing expo file: ad10012010g300370m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010g300370m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010g300370m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.96E+02 1408 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.evt Total Good Bad: Region Time Phase Cut 1408 1408 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1408 1408 0 0 0 0 in 96.00 seconds Image has 1408 counts for 14.67 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.evt Total Good Bad: Region Time Phase Cut 1408 831 0 0 0 577 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1408 831 0 0 0 577 in 96.00 seconds Image has 831 counts for 8.656 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.evt Total Good Bad: Region Time Phase Cut 1408 585 0 0 0 823 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1408 585 0 0 0 823 in 96.00 seconds Image has 585 counts for 6.094 counts/sec Command not found; type ? for a command listing !ad10012010g300370m:ASCA > !ad10012010g300370m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010g300370m:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010g300370m:ASCA > read events ad10012010g300370m.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010g300370m:ASCA-GIS3-PH > set image sky !ad10012010g300370m:ASCA-GIS3-PH > filter region corner_point.reg !ad10012010g300370m:ASCA-GIS3-PH > extract image !ad10012010g300370m:ASCA-GIS3-PH > save image outfile=ad10012010g300370m.img Wrote image to file ad10012010g300370m.img !ad10012010g300370m:ASCA-GIS3-PH > filter pha_cut 0 170 !ad10012010g300370m:ASCA-GIS3-PH > extract image !ad10012010g300370m:ASCA-GIS3-PH > save image outfile=ad10012010g300370m_lo.img Wrote image to file ad10012010g300370m_lo.img !ad10012010g300370m:ASCA-GIS3-PH > clear pha_cut !ad10012010g300370m:ASCA-GIS3-PH > filter pha_cut 170 1024 Warning: your PI upper bound: 1024 is above the maximum value. !ad10012010g300370m:ASCA-GIS3-PH > extract image !ad10012010g300370m:ASCA-GIS3-PH > save image outfile=ad10012010g300370m_hi.img Wrote image to file ad10012010g300370m_hi.img !ad10012010g300370m:ASCA-GIS3-PH > exit save_session=no-> Generating exposure map ad10012010s000102m.expo
ASCAEXPO_V0.9b reading data file: ad10012010s000102m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON ON ON ON AREA DISC IN/OUT: IN IN IN IN AREA DISC H START: 6 6 321 6 AREA DISC H STOP: 7 100 425 7 AREA DISC V START: 2 252 354 2 AREA DISC V STOP: 3 422 422 3 reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6948 Mean RA/DEC/ROLL : 94.2753 9.1799 82.6948 Pnt RA/DEC/ROLL : 94.2335 9.1629 82.6948 Image rebin factor : 4 Attitude Records : 15710 Hot Pixels : 0 GTI intervals : 1 Total GTI (secs) : 20.014 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 20.0139637 20.0139637 100 Percent Complete: Total/live time: 20.0139637 20.0139637 Number of attitude steps used: 2 Number of attitude steps avail: 29 Mean RA/DEC pixel offset: -23.9093 -44.3721 writing expo file: ad10012010s000102m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010s000102m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010s000102m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.20E+02 602 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000102m.evt Total Good Bad: Region Time Phase Cut 602 602 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 602 602 0 0 0 0 in 20.01 seconds Image has 602 counts for 30.08 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000102m.evt Total Good Bad: Region Time Phase Cut 602 476 0 0 0 126 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 602 476 0 0 0 126 in 20.01 seconds Image has 476 counts for 23.78 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000102m.evt Total Good Bad: Region Time Phase Cut 602 126 0 0 0 476 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 602 126 0 0 0 476 in 20.01 seconds Image has 126 counts for 6.296 counts/sec Command not found; type ? for a command listing !ad10012010s000102m:ASCA > !ad10012010s000102m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010s000102m:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010s000102m:ASCA > read events ad10012010s000102m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010s000102m:ASCA-SIS0-BRIGHT > set image sky !ad10012010s000102m:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad10012010s000102m:ASCA-SIS0-BRIGHT > extract image !ad10012010s000102m:ASCA-SIS0-BRIGHT > save image outfile=ad10012010s000102m.img Wrote image to file ad10012010s000102m.img !ad10012010s000102m:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad10012010s000102m:ASCA-SIS0-BRIGHT > extract image !ad10012010s000102m:ASCA-SIS0-BRIGHT > save image outfile=ad10012010s000102m_lo.img Wrote image to file ad10012010s000102m_lo.img !ad10012010s000102m:ASCA-SIS0-BRIGHT > clear pha_cut !ad10012010s000102m:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad10012010s000102m:ASCA-SIS0-BRIGHT > extract image !ad10012010s000102m:ASCA-SIS0-BRIGHT > save image outfile=ad10012010s000102m_hi.img Wrote image to file ad10012010s000102m_hi.img !ad10012010s000102m:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad10012010s000202h.expo
ASCAEXPO_V0.9b reading data file: ad10012010s000202h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON ON ON ON AREA DISC IN/OUT: IN IN IN IN AREA DISC H START: 6 6 321 6 AREA DISC H STOP: 7 100 425 7 AREA DISC V START: 2 252 354 2 AREA DISC V STOP: 3 422 422 3 reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6948 Mean RA/DEC/ROLL : 94.2752 9.1809 82.6948 Pnt RA/DEC/ROLL : 94.2299 9.1672 82.6948 Image rebin factor : 4 Attitude Records : 15710 Hot Pixels : 77 GTI intervals : 2 Total GTI (secs) : 65.955 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 33.9548035 33.9548035 20 Percent Complete: Total/live time: 33.9548035 33.9548035 30 Percent Complete: Total/live time: 34.3788719 34.3788719 40 Percent Complete: Total/live time: 34.3788719 34.3788719 50 Percent Complete: Total/live time: 65.9548035 65.9548035 100 Percent Complete: Total/live time: 65.9548035 65.9548035 Number of attitude steps used: 4 Number of attitude steps avail: 368 Mean RA/DEC pixel offset: -27.2709 -69.6561 writing expo file: ad10012010s000202h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010s000202h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010s000202h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.66E+02 1620 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000202h.evt Total Good Bad: Region Time Phase Cut 1620 1620 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1620 1620 0 0 0 0 in 65.95 seconds Image has 1620 counts for 24.56 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000202h.evt Total Good Bad: Region Time Phase Cut 1620 1191 0 0 0 429 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1620 1191 0 0 0 429 in 65.95 seconds Image has 1191 counts for 18.06 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000202h.evt Total Good Bad: Region Time Phase Cut 1620 431 0 0 0 1189 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1620 431 0 0 0 1189 in 65.95 seconds Image has 431 counts for 6.535 counts/sec Command not found; type ? for a command listing !ad10012010s000202h:ASCA > !ad10012010s000202h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010s000202h:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010s000202h:ASCA > read events ad10012010s000202h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010s000202h:ASCA-SIS0-BRIGHT > set image sky !ad10012010s000202h:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad10012010s000202h:ASCA-SIS0-BRIGHT > extract image !ad10012010s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad10012010s000202h.img Wrote image to file ad10012010s000202h.img !ad10012010s000202h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad10012010s000202h:ASCA-SIS0-BRIGHT > extract image !ad10012010s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad10012010s000202h_lo.img Wrote image to file ad10012010s000202h_lo.img !ad10012010s000202h:ASCA-SIS0-BRIGHT > clear pha_cut !ad10012010s000202h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad10012010s000202h:ASCA-SIS0-BRIGHT > extract image !ad10012010s000202h:ASCA-SIS0-BRIGHT > save image outfile=ad10012010s000202h_hi.img Wrote image to file ad10012010s000202h_hi.img !ad10012010s000202h:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad10012010s000302h.expo
ASCAEXPO_V0.9b reading data file: ad10012010s000302h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s0_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON ON ON ON AREA DISC IN/OUT: IN IN IN IN AREA DISC H START: 6 6 321 6 AREA DISC H STOP: 7 100 425 7 AREA DISC V START: 2 252 354 2 AREA DISC V STOP: 3 422 422 3 reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6950 Mean RA/DEC/ROLL : 94.2730 9.1814 82.6950 Pnt RA/DEC/ROLL : 94.2323 9.1683 82.6950 Image rebin factor : 4 Attitude Records : 15710 Hot Pixels : 240 GTI intervals : 3 Total GTI (secs) : 1821.969 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1409.9337158 1409.9337158 20 Percent Complete: Total/live time: 1409.9337158 1409.9337158 30 Percent Complete: Total/live time: 1771.4322510 1771.4322510 40 Percent Complete: Total/live time: 1771.4322510 1771.4322510 50 Percent Complete: Total/live time: 1780.9322510 1780.9322510 60 Percent Complete: Total/live time: 1780.9322510 1780.9322510 70 Percent Complete: Total/live time: 1821.9687500 1821.9687500 100 Percent Complete: Total/live time: 1821.9687500 1821.9687500 Number of attitude steps used: 5 Number of attitude steps avail: 3868 Mean RA/DEC pixel offset: -30.5883 -64.0503 writing expo file: ad10012010s000302h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010s000302h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010s000302h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.18E+04 66758 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000302h.evt Total Good Bad: Region Time Phase Cut 66758 66758 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 66758 66758 0 0 0 0 in 1821.97 seconds Image has 66758 counts for 36.64 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000302h.evt Total Good Bad: Region Time Phase Cut 66758 46133 0 0 0 20625 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 66758 46133 0 0 0 20625 in 1821.97 seconds Image has 46133 counts for 25.32 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000302h.evt Total Good Bad: Region Time Phase Cut 66758 20689 0 0 0 46069 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 66758 20689 0 0 0 46069 in 1821.97 seconds Image has 20689 counts for 11.36 counts/sec Command not found; type ? for a command listing !ad10012010s000302h:ASCA > !ad10012010s000302h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010s000302h:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010s000302h:ASCA > read events ad10012010s000302h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010s000302h:ASCA-SIS0-BRIGHT > set image sky !ad10012010s000302h:ASCA-SIS0-BRIGHT > filter region corner_point.reg !ad10012010s000302h:ASCA-SIS0-BRIGHT > extract image !ad10012010s000302h:ASCA-SIS0-BRIGHT > save image outfile=ad10012010s000302h.img Wrote image to file ad10012010s000302h.img !ad10012010s000302h:ASCA-SIS0-BRIGHT > filter pha_cut 0 547 !ad10012010s000302h:ASCA-SIS0-BRIGHT > extract image !ad10012010s000302h:ASCA-SIS0-BRIGHT > save image outfile=ad10012010s000302h_lo.img Wrote image to file ad10012010s000302h_lo.img !ad10012010s000302h:ASCA-SIS0-BRIGHT > clear pha_cut !ad10012010s000302h:ASCA-SIS0-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad10012010s000302h:ASCA-SIS0-BRIGHT > extract image !ad10012010s000302h:ASCA-SIS0-BRIGHT > save image outfile=ad10012010s000302h_hi.img Wrote image to file ad10012010s000302h_hi.img !ad10012010s000302h:ASCA-SIS0-BRIGHT > exit save_session=no-> Generating exposure map ad10012010s100102m.expo
ASCAEXPO_V0.9b reading data file: ad10012010s100102m.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON ON ON ON AREA DISC IN/OUT: IN IN IN IN AREA DISC H START: 376 6 6 6 AREA DISC H STOP: 425 7 7 45 AREA DISC V START: 410 2 2 308 AREA DISC V STOP: 422 3 3 422 reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6923 Mean RA/DEC/ROLL : 94.2596 9.1829 82.6923 Pnt RA/DEC/ROLL : 94.2494 9.1599 82.6923 Image rebin factor : 4 Attitude Records : 15710 Hot Pixels : 40 GTI intervals : 2 Total GTI (secs) : 40.090 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 20.0139637 20.0139637 20 Percent Complete: Total/live time: 20.0139637 20.0139637 30 Percent Complete: Total/live time: 20.0139942 20.0139942 40 Percent Complete: Total/live time: 20.0139942 20.0139942 50 Percent Complete: Total/live time: 40.0900650 40.0900650 100 Percent Complete: Total/live time: 40.0900650 40.0900650 Number of attitude steps used: 4 Number of attitude steps avail: 344 Mean RA/DEC pixel offset: -29.8609 -16.0134 writing expo file: ad10012010s100102m.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010s100102m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010s100102m Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.40E+02 893 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100102m.evt Total Good Bad: Region Time Phase Cut 893 893 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 893 893 0 0 0 0 in 40.09 seconds Image has 893 counts for 22.27 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100102m.evt Total Good Bad: Region Time Phase Cut 893 698 0 0 0 195 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 893 698 0 0 0 195 in 40.09 seconds Image has 698 counts for 17.41 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100102m.evt Total Good Bad: Region Time Phase Cut 893 197 0 0 0 696 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 893 197 0 0 0 696 in 40.09 seconds Image has 197 counts for 4.914 counts/sec Command not found; type ? for a command listing !ad10012010s100102m:ASCA > !ad10012010s100102m:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010s100102m:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010s100102m:ASCA > read events ad10012010s100102m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010s100102m:ASCA-SIS1-BRIGHT > set image sky !ad10012010s100102m:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad10012010s100102m:ASCA-SIS1-BRIGHT > extract image !ad10012010s100102m:ASCA-SIS1-BRIGHT > save image outfile=ad10012010s100102m.img Wrote image to file ad10012010s100102m.img !ad10012010s100102m:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad10012010s100102m:ASCA-SIS1-BRIGHT > extract image !ad10012010s100102m:ASCA-SIS1-BRIGHT > save image outfile=ad10012010s100102m_lo.img Wrote image to file ad10012010s100102m_lo.img !ad10012010s100102m:ASCA-SIS1-BRIGHT > clear pha_cut !ad10012010s100102m:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad10012010s100102m:ASCA-SIS1-BRIGHT > extract image !ad10012010s100102m:ASCA-SIS1-BRIGHT > save image outfile=ad10012010s100102m_hi.img Wrote image to file ad10012010s100102m_hi.img !ad10012010s100102m:ASCA-SIS1-BRIGHT > exit save_session=no-> Generating exposure map ad10012010s100202h.expo
ASCAEXPO_V0.9b reading data file: ad10012010s100202h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON ON ON ON AREA DISC IN/OUT: IN IN IN IN AREA DISC H START: 376 6 6 6 AREA DISC H STOP: 425 7 7 45 AREA DISC V START: 410 2 2 308 AREA DISC V STOP: 422 3 3 422 reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6923 Mean RA/DEC/ROLL : 94.2595 9.1838 82.6923 Pnt RA/DEC/ROLL : 94.2457 9.1642 82.6923 Image rebin factor : 4 Attitude Records : 15710 Hot Pixels : 39 GTI intervals : 4 Total GTI (secs) : 43.958 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 21.9933891 21.9933891 20 Percent Complete: Total/live time: 21.9933891 21.9933891 30 Percent Complete: Total/live time: 21.9934559 21.9934559 40 Percent Complete: Total/live time: 21.9934559 21.9934559 50 Percent Complete: Total/live time: 43.9583435 43.9583435 100 Percent Complete: Total/live time: 43.9583435 43.9583435 Number of attitude steps used: 6 Number of attitude steps avail: 3944 Mean RA/DEC pixel offset: -32.7579 -13.5340 writing expo file: ad10012010s100202h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010s100202h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010s100202h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.44E+02 981 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100202h.evt Total Good Bad: Region Time Phase Cut 981 981 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 981 981 0 0 0 0 in 43.96 seconds Image has 981 counts for 22.32 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100202h.evt Total Good Bad: Region Time Phase Cut 981 795 0 0 0 186 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 981 795 0 0 0 186 in 43.96 seconds Image has 795 counts for 18.09 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100202h.evt Total Good Bad: Region Time Phase Cut 981 187 0 0 0 794 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 981 187 0 0 0 794 in 43.96 seconds Image has 187 counts for 4.254 counts/sec Command not found; type ? for a command listing !ad10012010s100202h:ASCA > !ad10012010s100202h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010s100202h:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010s100202h:ASCA > read events ad10012010s100202h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010s100202h:ASCA-SIS1-BRIGHT > set image sky !ad10012010s100202h:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad10012010s100202h:ASCA-SIS1-BRIGHT > extract image !ad10012010s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad10012010s100202h.img Wrote image to file ad10012010s100202h.img !ad10012010s100202h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad10012010s100202h:ASCA-SIS1-BRIGHT > extract image !ad10012010s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad10012010s100202h_lo.img Wrote image to file ad10012010s100202h_lo.img !ad10012010s100202h:ASCA-SIS1-BRIGHT > clear pha_cut !ad10012010s100202h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad10012010s100202h:ASCA-SIS1-BRIGHT > extract image !ad10012010s100202h:ASCA-SIS1-BRIGHT > save image outfile=ad10012010s100202h_hi.img Wrote image to file ad10012010s100202h_hi.img !ad10012010s100202h:ASCA-SIS1-BRIGHT > exit save_session=no-> Generating exposure map ad10012010s100302h.expo
ASCAEXPO_V0.9b reading data file: ad10012010s100302h.evt reading gti ext: STDGTI reading hp ext: HOT_PIXELS reading cal file: s1_teldef_ascalin.fits making an inst map... SIS AREA DISC ENABL OFF CHIP: 0 1 2 3 CCD POWER ON/OFF: ON ON ON ON AREA DISC IN/OUT: IN IN IN IN AREA DISC H START: 376 6 6 6 AREA DISC H STOP: 425 7 7 45 AREA DISC V START: 410 2 2 308 AREA DISC V STOP: 422 3 3 422 reading att file: ./fa930416_0325.0950 making an exposure map... Aspect RA/DEC/ROLL : 94.2538 9.1754 82.6925 Mean RA/DEC/ROLL : 94.2572 9.1844 82.6925 Pnt RA/DEC/ROLL : 94.2482 9.1653 82.6925 Image rebin factor : 4 Attitude Records : 15710 Hot Pixels : 201 GTI intervals : 2 Total GTI (secs) : 1849.969 Max attitude excursion (arcsecs) : 5.000 0 Percent Complete: Total/live time: 0.0000000 0.0000000 10 Percent Complete: Total/live time: 1269.4344482 1269.4344482 20 Percent Complete: Total/live time: 1269.4344482 1269.4344482 30 Percent Complete: Total/live time: 1849.9687500 1849.9687500 100 Percent Complete: Total/live time: 1849.9687500 1849.9687500 Number of attitude steps used: 3 Number of attitude steps avail: 3735 Mean RA/DEC pixel offset: -27.9666 -6.2418 writing expo file: ad10012010s100302h.expo closing attitude file... closing data file...-> Generating low and high energy images for ad10012010s100302h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] ad10012010s100302h Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.18E+04 57350 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100302h.evt Total Good Bad: Region Time Phase Cut 57350 57350 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 57350 57350 0 0 0 0 in 1849.97 seconds Image has 57350 counts for 31.00 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100302h.evt Total Good Bad: Region Time Phase Cut 57350 39737 0 0 0 17613 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 57350 39737 0 0 0 17613 in 1849.97 seconds Image has 39737 counts for 21.48 counts/sec EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100302h.evt Total Good Bad: Region Time Phase Cut 57350 17670 0 0 0 39680 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 57350 17670 0 0 0 39680 in 1849.97 seconds Image has 17670 counts for 9.552 counts/sec Command not found; type ? for a command listing !ad10012010s100302h:ASCA > !ad10012010s100302h:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !ad10012010s100302h:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !ad10012010s100302h:ASCA > read events ad10012010s100302h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !ad10012010s100302h:ASCA-SIS1-BRIGHT > set image sky !ad10012010s100302h:ASCA-SIS1-BRIGHT > filter region corner_point.reg !ad10012010s100302h:ASCA-SIS1-BRIGHT > extract image !ad10012010s100302h:ASCA-SIS1-BRIGHT > save image outfile=ad10012010s100302h.img Wrote image to file ad10012010s100302h.img !ad10012010s100302h:ASCA-SIS1-BRIGHT > filter pha_cut 0 547 !ad10012010s100302h:ASCA-SIS1-BRIGHT > extract image !ad10012010s100302h:ASCA-SIS1-BRIGHT > save image outfile=ad10012010s100302h_lo.img Wrote image to file ad10012010s100302h_lo.img !ad10012010s100302h:ASCA-SIS1-BRIGHT > clear pha_cut !ad10012010s100302h:ASCA-SIS1-BRIGHT > filter pha_cut 547 2048 Warning: your PI upper bound: 2048 is above the maximum value. !ad10012010s100302h:ASCA-SIS1-BRIGHT > extract image !ad10012010s100302h:ASCA-SIS1-BRIGHT > save image outfile=ad10012010s100302h_hi.img Wrote image to file ad10012010s100302h_hi.img !ad10012010s100302h:ASCA-SIS1-BRIGHT > exit save_session=no-> Summing sis images
ad10012010s000102m.expo ad10012010s000202h.expo ad10012010s000302h.expo ad10012010s100102m.expo ad10012010s100202h.expo ad10012010s100302h.expo-> Summing the following images to produce ad10012010sis32002_all.totsky
ad10012010s000102m.img ad10012010s000202h.img ad10012010s000302h.img ad10012010s100102m.img ad10012010s100202h.img ad10012010s100302h.img-> Summing the following images to produce ad10012010sis32002_lo.totsky
ad10012010s000102m_lo.img ad10012010s000202h_lo.img ad10012010s000302h_lo.img ad10012010s100102m_lo.img ad10012010s100202h_lo.img ad10012010s100302h_lo.img-> Summing the following images to produce ad10012010sis32002_hi.totsky
ad10012010s000102m_hi.img ad10012010s000202h_hi.img ad10012010s000302h_hi.img ad10012010s100102m_hi.img ad10012010s100202h_hi.img ad10012010s100302h_hi.img-> Running XIMAGE to create ad10012010sis32002.gif
No of detectors read in: 20 ![1]XIMAGE> read/fits ad10012010sis32002_all.totsky Reading an image Telescope ASCA SIS0 Image display size = 320 Done, closing file Largest, Smallest 177.000 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 177 min: 0 ![2]XIMAGE> read/exp_map ad10012010sis32002.totexpo Reading an image Telescope ASCA SIS0 Image display size = 320 Done, closing file Largest, Smallest 64.0326 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 64 min: 0 ![3]XIMAGE> smooth ![4]XIMAGE> cpd /ppm ![5]XIMAGE> cey 2000 ![6]XIMAGE> disp/correct/noframe Displaying image The image is exposure corrected Min = 0 max = 1582 ![7]XIMAGE> grid ![8]XIMAGE> scale scal_f, min_inten 1.00000 0. i,inten,mm,pp 1 0. 0 0 i,inten,mm,pp 2 4.00000 40 -1 i,inten,mm,pp 3 12.0000 12 0 i,inten,mm,pp 4 34.0000 34 0 ![9]XIMAGE> exit-> Summing gis images
ad10012010g200170h.expo ad10012010g200270m.expo ad10012010g200370m.expo ad10012010g300170h.expo ad10012010g300270m.expo ad10012010g300370m.expo-> Summing the following images to produce ad10012010gis25670_all.totsky
ad10012010g200170h.img ad10012010g200270m.img ad10012010g200370m.img ad10012010g300170h.img ad10012010g300270m.img ad10012010g300370m.img-> Summing the following images to produce ad10012010gis25670_lo.totsky
ad10012010g200170h_lo.img ad10012010g200270m_lo.img ad10012010g200370m_lo.img ad10012010g300170h_lo.img ad10012010g300270m_lo.img ad10012010g300370m_lo.img-> Summing the following images to produce ad10012010gis25670_hi.totsky
ad10012010g200170h_hi.img ad10012010g200270m_hi.img ad10012010g200370m_hi.img ad10012010g300170h_hi.img ad10012010g300270m_hi.img ad10012010g300370m_hi.img-> Running XIMAGE to create ad10012010gis25670.gif
No of detectors read in: 20 ![1]XIMAGE> read/fits ad10012010gis25670_all.totsky Reading an image Telescope ASCA GIS2 Image display size = 256 Done, closing file Largest, Smallest 2939.00 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 2939 min: 0 ![2]XIMAGE> read/exp_map ad10012010gis25670.totexpo Reading an image Telescope ASCA GIS2 Image display size = 256 Done, closing file Largest, Smallest 377.934 0. Bscale, Bzero from file 1.0000000000000 0. After internal scaling Bscale and Bzero 1.0000000000000 0. Image level, max: 377 min: 0 ![3]XIMAGE> smooth ![4]XIMAGE> cpd /ppm ![5]XIMAGE> cey 2000 ![6]XIMAGE> disp/correct/noframe Displaying image The image is exposure corrected Min = 0 max = 2238 ![7]XIMAGE> grid ![8]XIMAGE> scale scal_f, min_inten 1.00000 0. i,inten,mm,pp 1 0. 0 0 i,inten,mm,pp 2 4.00000 40 -1 i,inten,mm,pp 3 12.0000 12 0 i,inten,mm,pp 4 58.0000 58 0 ![9]XIMAGE> exit
122 120 0.102492 91 8 2928.13-> Smoothing ad10012010gis25670_hi.totsky with ad10012010gis25670.totexpo
122 120 0.0489356 91 7 2762.36-> Smoothing ad10012010gis25670_lo.totsky with ad10012010gis25670.totexpo
122 120 0.0540364 91 9 2892.46-> Determining extraction radii
122 120 24 F-> Standard Output From STOOL colorpic:
color plane 0 color plane 1 color plane 2 writing image image written-> Creating fits catalog of sources: ad10012010gis25670.src
147 143 0.0344443 176 19 1605.24-> Smoothing ad10012010sis32002_hi.totsky with ad10012010sis32002.totexpo
146 140 0.0164557 179 14 1798.35-> Smoothing ad10012010sis32002_lo.totsky with ad10012010sis32002.totexpo
143 138 0.0211409 182 20 1299.36-> Determining extraction radii
147 143 38 T-> Standard Output From STOOL colorpic:
color plane 0 color plane 1 color plane 2 writing image image written-> Creating fits catalog of sources: ad10012010sis32002.src
The sum of the selected column is 39655.000 The mean of the selected column is 683.70690 The standard deviation of the selected column is 1.1548315 The minimum of selected column is 681.00000 The maximum of selected column is 686.00000 The number of points used in calculation is 58-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 31261.000 The mean of the selected column is 538.98276 The standard deviation of the selected column is 1.6489378 The minimum of selected column is 536.00000 The maximum of selected column is 543.00000 The number of points used in calculation is 58-> Converting (588.0,572.0,2.0) to s1 detector coordinates
The sum of the selected column is 37490.000 The mean of the selected column is 681.63636 The standard deviation of the selected column is 1.2226813 The minimum of selected column is 679.00000 The maximum of selected column is 684.00000 The number of points used in calculation is 55-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 31626.000 The mean of the selected column is 575.01818 The standard deviation of the selected column is 1.4967979 The minimum of selected column is 572.00000 The maximum of selected column is 579.00000 The number of points used in calculation is 55-> Converting (122.0,120.0,2.0) to g2 detector coordinates
The sum of the selected column is 2323358.0 The mean of the selected column is 132.21933 The standard deviation of the selected column is 1.1316182 The minimum of selected column is 129.00000 The maximum of selected column is 135.00000 The number of points used in calculation is 17572-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 2100361.0 The mean of the selected column is 119.52885 The standard deviation of the selected column is 1.1516004 The minimum of selected column is 116.00000 The maximum of selected column is 123.00000 The number of points used in calculation is 17572-> Converting (122.0,120.0,2.0) to g3 detector coordinates
The sum of the selected column is 2044161.0 The mean of the selected column is 138.03505 The standard deviation of the selected column is 1.1300142 The minimum of selected column is 135.00000 The maximum of selected column is 141.00000 The number of points used in calculation is 14809-> Standard Output From FTOOL fstatistic:
The sum of the selected column is 1777162.0 The mean of the selected column is 120.00554 The standard deviation of the selected column is 1.1615098 The minimum of selected column is 117.00000 The maximum of selected column is 123.00000 The number of points used in calculation is 14809
1 ad10012010s000102m.evt 68980 1 ad10012010s000202h.evt 68980 1 ad10012010s000302h.evt 68980-> Fetching SIS0_OFFCHIP.1
ad10012010s000102m.evt ad10012010s000202h.evt ad10012010s000302h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.20E+02 602 1111 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.20E+02 602 1111 2 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.66E+02 1620 1111 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.20E+02 602 1111 2 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.66E+02 1620 1111 3 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.18E+04 66758 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000102m.evt Total Good Bad: Region Time Phase Cut 602 248 354 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000202h.evt Total Good Bad: Region Time Phase Cut 1620 956 664 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000302h.evt Total Good Bad: Region Time Phase Cut 66758 52775 13983 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 68980 53979 15001 0 0 0 in 1907.94 seconds Spectrum has 53979 counts for 28.29 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1907.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 3.99902E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010s010102_1.pi EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000102m.evt Total Good Bad: Region Time Phase Cut 602 248 354 0 0 0 Writing events file 248 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000202h.evt Total Good Bad: Region Time Phase Cut 1620 956 664 0 0 0 Writing events file 1204 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000302h.evt Total Good Bad: Region Time Phase Cut 66758 52775 13983 0 0 0 Writing events file 53979 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 68980 53979 15001 0 0 0 in 1907.94 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s000102m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > read events ad10012010s000202h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > read events ad10012010s000302h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > set phaname PI !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s010102.discrim !xsel:ASCA-SIS0-BRIGHT > extract spectrum !xsel:ASCA-SIS0-BRIGHT > save spectrum ad10012010s010102_1.pi group=yes Wrote spectrum to ad10012010s010102_1.pi !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Grouping ad10012010s010102_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1907.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 3.99902E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 12 of undefined grouping (Channel quality=bad) ... 13 - 173 are single channels ... 174 - 175 are grouped by a factor 2 ... 176 - 177 are single channels ... 178 - 179 are grouped by a factor 2 ... 180 - 180 are single channels ... 181 - 182 are grouped by a factor 2 ... 183 - 183 are single channels ... 184 - 203 are grouped by a factor 2 ... 204 - 206 are grouped by a factor 3 ... 207 - 212 are grouped by a factor 2 ... 213 - 218 are grouped by a factor 3 ... 219 - 220 are grouped by a factor 2 ... 221 - 226 are grouped by a factor 3 ... 227 - 238 are grouped by a factor 4 ... 239 - 248 are grouped by a factor 5 ... 249 - 255 are grouped by a factor 7 ... 256 - 264 are grouped by a factor 9 ... 265 - 277 are grouped by a factor 13 ... 278 - 292 are grouped by a factor 15 ... 293 - 322 are grouped by a factor 30 ... 323 - 416 are grouped by a factor 94 ... 417 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010s010102_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0 1 2 3
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 53979 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 53979 211 53768 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 53979 211 53768 0 0 0 in 1907.94 seconds Spectrum has 211 counts for 0.1106 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1907.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 6.34766E-04 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec0.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > set phaname PI !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s010102.discrim !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1 !xsel:ASCA-SIS0-BRIGHT > extract spectrum !xsel:ASCA-SIS0-BRIGHT > save spectrum spec0.tmp group=yes Wrote spectrum to spec0.tmp !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Fetching sis0c0p40_290296.fits
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C0 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Fetching SIS0_NOTCHIP0.1
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 53979 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 53979 8792 45187 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 53979 8792 45187 0 0 0 in 1907.94 seconds Spectrum has 8792 counts for 4.608 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1907.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 1.16602E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec1.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > set phaname PI !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s010102.discrim !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1 !xsel:ASCA-SIS0-BRIGHT > extract spectrum !xsel:ASCA-SIS0-BRIGHT > save spectrum spec1.tmp group=yes Wrote spectrum to spec1.tmp !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Fetching sis0c1p40_290296.fits
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C1 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> SIS0_NOTCHIP0.1 already present in current directory
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 53979 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 53979 44250 9729 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 53979 44250 9729 0 0 0 in 1907.94 seconds Spectrum has 44250 counts for 23.19 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1907.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.52734E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec2.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > set phaname PI !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s010102.discrim !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP3.1 !xsel:ASCA-SIS0-BRIGHT > extract spectrum !xsel:ASCA-SIS0-BRIGHT > save spectrum spec2.tmp group=yes Wrote spectrum to spec2.tmp !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Fetching sis0c2p40_290296.fits
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C2 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> SIS0_NOTCHIP0.1 already present in current directory
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 53979 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 53979 726 53253 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 53979 726 53253 0 0 0 in 1907.94 seconds Spectrum has 726 counts for 0.3805 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1907.9 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.42188E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec3.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > set phaname PI !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s010102.discrim !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP0.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP1.1 !xsel:ASCA-SIS0-BRIGHT > filter region SIS0_NOTCHIP2.1 !xsel:ASCA-SIS0-BRIGHT > extract spectrum !xsel:ASCA-SIS0-BRIGHT > save spectrum spec3.tmp group=yes Wrote spectrum to spec3.tmp !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Fetching sis0c3p40_290296.fits
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S0C3 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Chip weights:
rmf0.tmp 0.00390892754589748 rmf1.tmp 0.16287815632005 rmf2.tmp 0.81976324126049 rmf3.tmp 0.0134496748735619-> Standard Output From FTOOL addrmf:
ADDRMF vers 1.10 10 April, 1997. Summing ... 3.909E-03 * rmf0.tmp 1.629E-01 * rmf1.tmp 8.198E-01 * rmf2.tmp 1.345E-02 * rmf3.tmp RMF # 1 : rmf0.tmp 0.00 ASCA SIS0 NONE NONE PI RMF # 2 : rmf1.tmp 0.16 ASCA SIS0 NONE NONE PI RMF # 3 : rmf2.tmp 0.82 ASCA SIS0 NONE NONE PI RMF # 4 : rmf3.tmp 0.01 ASCA SIS0 NONE NONE PI-> Generating ad10012010s010102_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 39 by 40 bins expanded to 39 by 40 bins First WMAP bin is at detector pixel 536 384 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 46.081 arcmin^2 Optical axis is detector pixel 662.72 559.02 1180 energies from RMF file Effective area fudge applied Arf filter applied Total counts in region = 5.38600E+04 Weighted mean angle from optical axis = 2.166 arcmin-> Standard Output From STOOL group_event_files:
1 ad10012010s000212h.evt 1627-> SIS0_OFFCHIP.1 already present in current directory
ad10012010s000212h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.66E+02 1627 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000212h.evt Total Good Bad: Region Time Phase Cut 1627 959 668 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1627 959 668 0 0 0 in 65.95 seconds Spectrum has 959 counts for 14.54 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 65.955 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 3.99902E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 25 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010s010212_1.pi EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000212h.evt Total Good Bad: Region Time Phase Cut 1627 959 668 0 0 0 Writing events file 959 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1627 959 668 0 0 0 in 65.95 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s000212h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT2 > set phaname PI !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s010212.discrim !xsel:ASCA-SIS0-BRIGHT2 > extract spectrum !xsel:ASCA-SIS0-BRIGHT2 > save spectrum ad10012010s010212_1.pi group=yes Wrote spectrum to ad10012010s010212_1.pi !xsel:ASCA-SIS0-BRIGHT2 > extract events !xsel:ASCA-SIS0-BRIGHT2 > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no-> Grouping ad10012010s010212_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 65.955 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 3.99902E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 25 of undefined grouping (Channel quality=bad) ... 26 - 49 are grouped by a factor 24 ... 50 - 57 are grouped by a factor 8 ... 58 - 75 are grouped by a factor 6 ... 76 - 79 are grouped by a factor 4 ... 80 - 89 are grouped by a factor 5 ... 90 - 92 are grouped by a factor 3 ... 93 - 102 are grouped by a factor 5 ... 103 - 106 are grouped by a factor 4 ... 107 - 111 are grouped by a factor 5 ... 112 - 118 are grouped by a factor 7 ... 119 - 130 are grouped by a factor 12 ... 131 - 139 are grouped by a factor 9 ... 140 - 156 are grouped by a factor 17 ... 157 - 174 are grouped by a factor 18 ... 175 - 206 are grouped by a factor 32 ... 207 - 241 are grouped by a factor 35 ... 242 - 302 are grouped by a factor 61 ... 303 - 456 are grouped by a factor 154 ... 457 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010s010212_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0 1 2 3
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.66E+02 959 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 959 8 951 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 959 8 951 0 0 0 in 65.95 seconds Spectrum has 8 counts for 0.1213 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 65.955 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 6.34766E-04 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 25 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec0.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT2 > set phaname PI !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s010212.discrim !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP1.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1 !xsel:ASCA-SIS0-BRIGHT2 > extract spectrum !xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec0.tmp group=yes Wrote spectrum to spec0.tmp !xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no-> sis0c0p40_290296.fits already present in current directory
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x1024 S0C0 Bright2 PI RMF Calibration data from ./ Please stand by... ...Done.-> SIS0_NOTCHIP0.1 already present in current directory
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.66E+02 959 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 959 297 662 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 959 297 662 0 0 0 in 65.95 seconds Spectrum has 297 counts for 4.503 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 65.955 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 1.16602E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 25 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec1.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT2 > set phaname PI !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s010212.discrim !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1 !xsel:ASCA-SIS0-BRIGHT2 > extract spectrum !xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec1.tmp group=yes Wrote spectrum to spec1.tmp !xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no-> sis0c1p40_290296.fits already present in current directory
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x1024 S0C1 Bright2 PI RMF Calibration data from ./ Please stand by... ...Done.-> SIS0_NOTCHIP0.1 already present in current directory
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.66E+02 959 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 959 629 330 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 959 629 330 0 0 0 in 65.95 seconds Spectrum has 629 counts for 9.537 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 65.955 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.52734E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 25 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec2.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT2 > set phaname PI !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s010212.discrim !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP1.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP3.1 !xsel:ASCA-SIS0-BRIGHT2 > extract spectrum !xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec2.tmp group=yes Wrote spectrum to spec2.tmp !xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no-> sis0c2p40_290296.fits already present in current directory
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x1024 S0C2 Bright2 PI RMF Calibration data from ./ Please stand by... ...Done.-> SIS0_NOTCHIP0.1 already present in current directory
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.66E+02 959 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 959 25 934 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 959 25 934 0 0 0 in 65.95 seconds Spectrum has 25 counts for 0.3790 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS0 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 65.955 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.42188E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 25 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec3.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT2 > set phaname PI !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_OFFCHIP.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s010212.discrim !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP0.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP1.1 !xsel:ASCA-SIS0-BRIGHT2 > filter region SIS0_NOTCHIP2.1 !xsel:ASCA-SIS0-BRIGHT2 > extract spectrum !xsel:ASCA-SIS0-BRIGHT2 > save spectrum spec3.tmp group=yes Wrote spectrum to spec3.tmp !xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no-> sis0c3p40_290296.fits already present in current directory
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x1024 S0C3 Bright2 PI RMF Calibration data from ./ Please stand by... ...Done.-> Chip weights:
rmf0.tmp 0.00834202294056309 rmf1.tmp 0.309697601668405 rmf2.tmp 0.655891553701773 rmf3.tmp 0.0260688216892596-> Standard Output From FTOOL addrmf:
ADDRMF vers 1.10 10 April, 1997. Summing ... 8.342E-03 * rmf0.tmp 3.097E-01 * rmf1.tmp 6.559E-01 * rmf2.tmp 2.607E-02 * rmf3.tmp RMF # 1 : rmf0.tmp 0.01 ASCA SIS0 NONE NONE PI RMF # 2 : rmf1.tmp 0.31 ASCA SIS0 NONE NONE PI RMF # 3 : rmf2.tmp 0.66 ASCA SIS0 NONE NONE PI RMF # 4 : rmf3.tmp 0.03 ASCA SIS0 NONE NONE PI-> Generating ad10012010s010212_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 39 by 40 bins expanded to 39 by 40 bins First WMAP bin is at detector pixel 536 384 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 46.081 arcmin^2 Optical axis is detector pixel 662.72 559.02 1180 energies from RMF file Effective area fudge applied Arf filter applied Total counts in region = 9.19000E+02 Weighted mean angle from optical axis = 2.928 arcmin-> Standard Output From STOOL group_event_files:
1 ad10012010s100102m.evt 59224 1 ad10012010s100202h.evt 59224 1 ad10012010s100302h.evt 59224-> Fetching SIS1_OFFCHIP.1
ad10012010s100102m.evt ad10012010s100202h.evt ad10012010s100302h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.40E+02 893 1111 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.40E+02 893 1111 2 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.44E+02 981 1111 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.40E+02 893 1111 2 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.44E+02 981 1111 3 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.18E+04 57350 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100102m.evt Total Good Bad: Region Time Phase Cut 893 283 610 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100202h.evt Total Good Bad: Region Time Phase Cut 981 278 703 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100302h.evt Total Good Bad: Region Time Phase Cut 57350 44772 12578 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 59224 45333 13891 0 0 0 in 1934.02 seconds Spectrum has 45333 counts for 23.44 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1934.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 3.97363E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010s110102_1.pi EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100102m.evt Total Good Bad: Region Time Phase Cut 893 283 610 0 0 0 Writing events file 283 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100202h.evt Total Good Bad: Region Time Phase Cut 981 278 703 0 0 0 Writing events file 561 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100302h.evt Total Good Bad: Region Time Phase Cut 57350 44772 12578 0 0 0 Writing events file 45333 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 59224 45333 13891 0 0 0 in 1934.02 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s100102m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > read events ad10012010s100202h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > read events ad10012010s100302h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > set phaname PI !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s110102.discrim !xsel:ASCA-SIS1-BRIGHT > extract spectrum !xsel:ASCA-SIS1-BRIGHT > save spectrum ad10012010s110102_1.pi group=yes Wrote spectrum to ad10012010s110102_1.pi !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Grouping ad10012010s110102_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1934.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 3.97363E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 12 of undefined grouping (Channel quality=bad) ... 13 - 14 are grouped by a factor 2 ... 15 - 166 are single channels ... 167 - 170 are grouped by a factor 2 ... 171 - 173 are single channels ... 174 - 177 are grouped by a factor 2 ... 178 - 178 are single channels ... 179 - 184 are grouped by a factor 2 ... 185 - 185 are single channels ... 186 - 197 are grouped by a factor 2 ... 198 - 200 are grouped by a factor 3 ... 201 - 208 are grouped by a factor 2 ... 209 - 220 are grouped by a factor 3 ... 221 - 236 are grouped by a factor 4 ... 237 - 241 are grouped by a factor 5 ... 242 - 255 are grouped by a factor 7 ... 256 - 263 are grouped by a factor 8 ... 264 - 285 are grouped by a factor 11 ... 286 - 305 are grouped by a factor 20 ... 306 - 385 are grouped by a factor 80 ... 386 - 511 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010s110102_1.pi ** grppha 2.6.0 completed successfully-> Source occupies chip(s) 0 1 2 3
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 45333 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 45333 33919 11414 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 45333 33919 11414 0 0 0 in 1934.02 seconds Spectrum has 33919 counts for 17.54 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1934.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.08105E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec0.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > set phaname PI !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s110102.discrim !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1 !xsel:ASCA-SIS1-BRIGHT > extract spectrum !xsel:ASCA-SIS1-BRIGHT > save spectrum spec0.tmp group=yes Wrote spectrum to spec0.tmp !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Fetching sis1c0p40_290296.fits
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C0 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Fetching SIS1_NOTCHIP0.1
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 45333 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 45333 2922 42411 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 45333 2922 42411 0 0 0 in 1934.02 seconds Spectrum has 2922 counts for 1.511 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1934.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 6.17188E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec1.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > set phaname PI !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s110102.discrim !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1 !xsel:ASCA-SIS1-BRIGHT > extract spectrum !xsel:ASCA-SIS1-BRIGHT > save spectrum spec1.tmp group=yes Wrote spectrum to spec1.tmp !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Fetching sis1c1p40_290296.fits
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C1 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> SIS1_NOTCHIP0.1 already present in current directory
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 45333 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 45333 1046 44287 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 45333 1046 44287 0 0 0 in 1934.02 seconds Spectrum has 1046 counts for 0.5408 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1934.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.56836E-03 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec2.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > set phaname PI !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s110102.discrim !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP3.1 !xsel:ASCA-SIS1-BRIGHT > extract spectrum !xsel:ASCA-SIS1-BRIGHT > save spectrum spec2.tmp group=yes Wrote spectrum to spec2.tmp !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Fetching sis1c2p40_290296.fits
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C2 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> SIS1_NOTCHIP0.1 already present in current directory
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 45333 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 45333 7446 37887 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 45333 7446 37887 0 0 0 in 1934.02 seconds Spectrum has 7446 counts for 3.850 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 1934.0 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 1.01855E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 512 No. of legal detector channels NCHAN - 512 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 12 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : spec3.tmp Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > set phaname PI !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s110102.discrim !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP0.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP1.1 !xsel:ASCA-SIS1-BRIGHT > filter region SIS1_NOTCHIP2.1 !xsel:ASCA-SIS1-BRIGHT > extract spectrum !xsel:ASCA-SIS1-BRIGHT > save spectrum spec3.tmp group=yes Wrote spectrum to spec3.tmp !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Fetching sis1c3p40_290296.fits
Sisrmg Version 1.1, Configured 04/97 This version resolves *all* known keyword incompatibilities with other FTOOLS tasks. If you have previously fudged *any* keywords in the PHA file to compensate, incorrect results will follow. Setting 1st PHA channel to 0 Making v1.1 1180x512 S1C3 Bright PI RMF Calibration data from ./ Please stand by... ...Done.-> Chip weights:
rmf0.tmp 0.748218736902477 rmf1.tmp 0.0644563562967375 rmf2.tmp 0.0230736990713167 rmf3.tmp 0.164251207729469-> Standard Output From FTOOL addrmf:
ADDRMF vers 1.10 10 April, 1997. Summing ... 7.482E-01 * rmf0.tmp 6.446E-02 * rmf1.tmp 2.307E-02 * rmf2.tmp 1.643E-01 * rmf3.tmp RMF # 1 : rmf0.tmp 0.75 ASCA SIS1 NONE NONE PI RMF # 2 : rmf1.tmp 0.06 ASCA SIS1 NONE NONE PI RMF # 3 : rmf2.tmp 0.02 ASCA SIS1 NONE NONE PI RMF # 4 : rmf3.tmp 0.16 ASCA SIS1 NONE NONE PI-> Generating ad10012010s110102_1.arf with point=no
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 40 by 40 bins expanded to 40 by 40 bins First WMAP bin is at detector pixel 528 424 8 detector pixels per WMAP bin WMAP bin size is 0.21600 mm 0.21216 arcmin Selected region size is 45.788 arcmin^2 Optical axis is detector pixel 618.28 773.83 1180 energies from RMF file Effective area fudge applied Arf filter applied Total counts in region = 4.52130E+04 Weighted mean angle from optical axis = 5.813 arcmin-> Standard Output From STOOL group_event_files:
1 ad10012010s100212h.evt 986-> SIS1_OFFCHIP.1 already present in current directory
ad10012010s100212h.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.44E+02 986 1111 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100212h.evt Total Good Bad: Region Time Phase Cut 986 281 705 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 986 281 705 0 0 0 in 43.96 seconds Spectrum has 281 counts for 6.392 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - SIS1 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 43.958 Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 3.97363E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... QUALITY ... ... ------- ... QUALITY ... ------- ... Bad Channels (Channel - Channel) ... --------------------------------------------- ... 0 - 25 have quality 5 ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010s110212_1.pi EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100212h.evt Total Good Bad: Region Time Phase Cut 986 281 705 0 0 0 Writing events file 281 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 986 281 705 0 0 0 in 43.96 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s100212h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT2 > set phaname PI !xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT2 > filter region SIS1_OFFCHIP.1 !xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012010s110212.discrim !xsel:ASCA-SIS1-BRIGHT2 > extract spectrum !xsel:ASCA-SIS1-BRIGHT2 > save spectrum ad10012010s110212_1.pi group=yes Wrote spectrum to ad10012010s110212_1.pi !xsel:ASCA-SIS1-BRIGHT2 > extract events !xsel:ASCA-SIS1-BRIGHT2 > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no-> Deleting ad10012010s110212_1.pi since it has 281 events
1 ad10012010g200170h.evt 239587 1 ad10012010g200270m.evt 239587 1 ad10012010g200370m.evt 239587-> GIS2_REGION256_OFF.4 already present in current directory
ad10012010g200170h.evt ad10012010g200270m.evt ad10012010g200370m.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 148513 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 148513 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 89664 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 148513 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 89664 1024 3 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.96E+02 1410 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.evt Total Good Bad: Region Time Phase Cut 148513 130336 18177 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.evt Total Good Bad: Region Time Phase Cut 89664 78117 11547 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.evt Total Good Bad: Region Time Phase Cut 1410 1246 164 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 239587 209699 29888 0 0 0 in 11338.03 seconds Spectrum has 209699 counts for 18.50 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS2 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 11338. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1992a OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010g210170_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g200170h.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > read events ad10012010g200270m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > read events ad10012010g200370m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > set phaname PI !xsel:ASCA-GIS2-PH > filter region ad10012010g225670_1.reg !xsel:ASCA-GIS2-PH > filter region GIS2_REGION256_OFF.4 !xsel:ASCA-GIS2-PH > extract spectrum !xsel:ASCA-GIS2-PH > save spectrum ad10012010g210170_1.pi group=yes Wrote spectrum to ad10012010g210170_1.pi !xsel:ASCA-GIS2-PH > exit save_session=no-> Correcting ad10012010g210170_1.pi for dead time
... read all the files from deadlist.tmp-> Grouping ad10012010g210170_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS2 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 11338. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - TRUE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 17 are grouped by a factor 18 ... 18 - 508 are single channels ... 509 - 510 are grouped by a factor 2 ... 511 - 542 are single channels ... 543 - 548 are grouped by a factor 2 ... 549 - 549 are single channels ... 550 - 551 are grouped by a factor 2 ... 552 - 552 are single channels ... 553 - 556 are grouped by a factor 2 ... 557 - 557 are single channels ... 558 - 559 are grouped by a factor 2 ... 560 - 560 are single channels ... 561 - 562 are grouped by a factor 2 ... 563 - 563 are single channels ... 564 - 569 are grouped by a factor 2 ... 570 - 570 are single channels ... 571 - 618 are grouped by a factor 2 ... 619 - 621 are grouped by a factor 3 ... 622 - 623 are grouped by a factor 2 ... 624 - 632 are grouped by a factor 3 ... 633 - 642 are grouped by a factor 2 ... 643 - 651 are grouped by a factor 3 ... 652 - 653 are grouped by a factor 2 ... 654 - 668 are grouped by a factor 3 ... 669 - 672 are grouped by a factor 4 ... 673 - 687 are grouped by a factor 3 ... 688 - 695 are grouped by a factor 4 ... 696 - 698 are grouped by a factor 3 ... 699 - 722 are grouped by a factor 4 ... 723 - 732 are grouped by a factor 5 ... 733 - 744 are grouped by a factor 6 ... 745 - 749 are grouped by a factor 5 ... 750 - 761 are grouped by a factor 6 ... 762 - 768 are grouped by a factor 7 ... 769 - 774 are grouped by a factor 6 ... 775 - 781 are grouped by a factor 7 ... 782 - 797 are grouped by a factor 8 ... 798 - 807 are grouped by a factor 10 ... 808 - 813 are grouped by a factor 6 ... 814 - 828 are grouped by a factor 15 ... 829 - 839 are grouped by a factor 11 ... 840 - 851 are grouped by a factor 12 ... 852 - 877 are grouped by a factor 26 ... 878 - 898 are grouped by a factor 21 ... 899 - 921 are grouped by a factor 23 ... 922 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010g210170_1.pi ** grppha 2.6.0 completed successfully-> Fetching gis2v4_0.rmf
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 49 by 49 bins expanded to 128 by 128 bins First WMAP bin is at detector pixel 70 58 1 detector pixels per WMAP bin WMAP bin size is 0.25000 mm 0.24555 arcmin Selected region size is 114.65 arcmin^2 Optical axis is detector pixel 133.00 130.96 201 energies from RMF file Effective area fudge applied Arf filter applied Point source at 132.00 120.00 (detector coordinates) Point source at 1.00 10.96 (WMAP bins wrt optical axis) Point source at 2.70 84.79 (... in polar coordinates) Total counts in region = 2.09699E+05 Weighted mean angle from optical axis = 3.335 arcmin-> Standard Output From STOOL group_event_files:
1 ad10012010g300170h.evt 221234 1 ad10012010g300270m.evt 221234 1 ad10012010g300370m.evt 221234-> GIS3_REGION256_OFF.4 already present in current directory
ad10012010g300170h.evt ad10012010g300270m.evt ad10012010g300370m.evt-> Standard Output From FTOOL xselect:
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 131848 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 131848 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 87978 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 131848 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 87978 1024 3 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.96E+02 1408 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.evt Total Good Bad: Region Time Phase Cut 131848 114773 17075 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.evt Total Good Bad: Region Time Phase Cut 87978 76177 11801 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.evt Total Good Bad: Region Time Phase Cut 1408 1246 162 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 221234 192196 29038 0 0 0 in 11338.03 seconds Spectrum has 192196 counts for 16.95 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS3 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 11338. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1992a OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010g310170_1.pi Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g300170h.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > read events ad10012010g300270m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > read events ad10012010g300370m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > set phaname PI !xsel:ASCA-GIS3-PH > filter region ad10012010g325670_1.reg !xsel:ASCA-GIS3-PH > filter region GIS3_REGION256_OFF.4 !xsel:ASCA-GIS3-PH > extract spectrum !xsel:ASCA-GIS3-PH > save spectrum ad10012010g310170_1.pi group=yes Wrote spectrum to ad10012010g310170_1.pi !xsel:ASCA-GIS3-PH > exit save_session=no-> Correcting ad10012010g310170_1.pi for dead time
... read all the files from deadlist.tmp-> Grouping ad10012010g310170_1.pi to 40 counts/bin
------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS3 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 11338. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.90070E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1.1.0 OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - TRUE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... 0 - 19 are grouped by a factor 20 ... 20 - 511 are single channels ... 512 - 513 are grouped by a factor 2 ... 514 - 526 are single channels ... 527 - 528 are grouped by a factor 2 ... 529 - 529 are single channels ... 530 - 531 are grouped by a factor 2 ... 532 - 537 are single channels ... 538 - 539 are grouped by a factor 2 ... 540 - 548 are single channels ... 549 - 552 are grouped by a factor 2 ... 553 - 554 are single channels ... 555 - 562 are grouped by a factor 2 ... 563 - 564 are single channels ... 565 - 566 are grouped by a factor 2 ... 567 - 567 are single channels ... 568 - 573 are grouped by a factor 2 ... 574 - 574 are single channels ... 575 - 616 are grouped by a factor 2 ... 617 - 619 are grouped by a factor 3 ... 620 - 623 are grouped by a factor 2 ... 624 - 626 are grouped by a factor 3 ... 627 - 628 are grouped by a factor 2 ... 629 - 634 are grouped by a factor 3 ... 635 - 640 are grouped by a factor 2 ... 641 - 652 are grouped by a factor 3 ... 653 - 656 are grouped by a factor 4 ... 657 - 674 are grouped by a factor 3 ... 675 - 678 are grouped by a factor 4 ... 679 - 684 are grouped by a factor 3 ... 685 - 688 are grouped by a factor 4 ... 689 - 693 are grouped by a factor 5 ... 694 - 697 are grouped by a factor 4 ... 698 - 702 are grouped by a factor 5 ... 703 - 710 are grouped by a factor 4 ... 711 - 725 are grouped by a factor 5 ... 726 - 729 are grouped by a factor 4 ... 730 - 734 are grouped by a factor 5 ... 735 - 746 are grouped by a factor 6 ... 747 - 753 are grouped by a factor 7 ... 754 - 761 are grouped by a factor 8 ... 762 - 770 are grouped by a factor 9 ... 771 - 777 are grouped by a factor 7 ... 778 - 787 are grouped by a factor 10 ... 788 - 795 are grouped by a factor 8 ... 796 - 805 are grouped by a factor 10 ... 806 - 816 are grouped by a factor 11 ... 817 - 840 are grouped by a factor 12 ... 841 - 856 are grouped by a factor 16 ... 857 - 869 are grouped by a factor 13 ... 870 - 888 are grouped by a factor 19 ... 889 - 919 are grouped by a factor 31 ... 920 - 1023 of undefined grouping (Channel quality=bad) ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010g310170_1.pi ** grppha 2.6.0 completed successfully-> Fetching gis3v4_0.rmf
ASCAARF vers 2.72 14 Mar 1997. Input WMAP array has size 49 by 49 bins expanded to 128 by 128 bins First WMAP bin is at detector pixel 76 58 1 detector pixels per WMAP bin WMAP bin size is 0.25000 mm 0.24555 arcmin Selected region size is 114.65 arcmin^2 Optical axis is detector pixel 119.36 134.44 201 energies from RMF file Effective area fudge applied Arf filter applied Point source at 138.00 120.00 (detector coordinates) Point source at -18.64 14.44 (WMAP bins wrt optical axis) Point source at 5.79 142.24 (... in polar coordinates) Total counts in region = 1.92196E+05 Weighted mean angle from optical axis = 6.088 arcmin-> Plotting ad10012010g210170_1_pi.ps from ad10012010g210170_1.pi
XSPEC 9.01 02:06:27 12-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad10012010g210170_1.pi Net count rate (cts/s) for file 1 18.50 +/- 4.0398E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad10012010g310170_1_pi.ps from ad10012010g310170_1.pi
XSPEC 9.01 02:06:57 12-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad10012010g310170_1.pi Net count rate (cts/s) for file 1 16.95 +/- 3.8675E-02 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad10012010s010102_1_pi.ps from ad10012010s010102_1.pi
XSPEC 9.01 02:07:27 12-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad10012010s010102_1.pi Net count rate (cts/s) for file 1 28.29 +/- 0.1219 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad10012010s010212_1_pi.ps from ad10012010s010212_1.pi
XSPEC 9.01 02:07:56 12-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad10012010s010212_1.pi Net count rate (cts/s) for file 1 14.54 +/- 0.5950 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Plotting ad10012010s110102_1_pi.ps from ad10012010s110102_1.pi
XSPEC 9.01 02:08:30 12-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> data ad10012010s110102_1.pi Net count rate (cts/s) for file 1 23.44 +/- 0.1102 1 data set is in use !XSPEC> setplot energy !XSPEC> ignore bad !XSPEC> iplot !PLT> log y on !PLT> rescale y !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.20E+02 602 1111 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.20E+02 602 1111 2 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.66E+02 1620 1111 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.20E+02 602 1111 2 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.66E+02 1620 1111 3 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.18E+04 66758 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000102m.evt Total Good Bad: Region Time Phase Cut 602 250 352 0 0 0 Writing events file 250 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000202h.evt Total Good Bad: Region Time Phase Cut 1620 970 650 0 0 0 Writing events file 1220 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000302h.evt Total Good Bad: Region Time Phase Cut 66758 53247 13511 0 0 0 Writing events file 54467 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 68980 54467 14513 0 0 0 in 1907.94 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s000102m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > read events ad10012010s000202h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > read events ad10012010s000302h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting ad10012010s000002_1.lc with binsize 1.6000000000E+01
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 54467 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 54467 54467 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 54467 54467 0 0 0 0 in 1907.94 seconds Fits light curve has 54467 counts for 28.55 counts/sec Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > set binsize 1.6000000000E+01 !xsel:ASCA-SIS0-BRIGHT > extract curve exposure=0.5 !xsel:ASCA-SIS0-BRIGHT > save curve ad10012010s000002_1.lc Wrote FITS light curve to file ad10012010s000002_1.lc !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Plotting light curve ad10012010s000002_1_lc.ps
Type "help" for information [1]xronos> Current User Interface is ; command driven [2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn) Ser. A filename 1 +options[.rbf]=> ad10012010s000002_1.lc Selected FITS extensions: 1 - RATE TABLE; Source ............ X0614+091 Start Time (d) .... 9093 04:29:16.119 FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9093 09:14:36.119 No. of Rows ....... 119 Bin Time (s) ...... 16.00 Right Ascension ... 9.4254E+01 Internal time sys.. Converted to TJD Declination ....... 9.1754E+00 Experiment ........ ASCA SIS0 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error; File contains binned data. Ser. A filename 2 +options[.rbf]=> Enter up to 50 input filenames and options for series 2 (or rtn) Ser. B filename 1 +options[.rbf]=> Enter up to 50 input filenames and options for series 3 (or rtn) Ser. C filename 1 +options[.rbf]=> [3]xronos> Maximum of 1 Intvs. with 512 Newbins of 33.4767 (s) Intv 1 Start 9093 4:29:32 Ser.1 Avg 28.23 Chisq 1127. Var 24.96 Newbs. 60 Min 7.562 Max 32.50 expVar 0.9159 Bins 119 Results from Statistical Analysis Newbin Integration Time (s).. 33.477 Interval Duration (s)........ 17107. No. of Newbins .............. 60 Average (c/s) ............... 28.230 +/- 0.12 Standard Deviation (c/s)..... 4.9964 Minimum (c/s)................ 7.5625 Maximum (c/s)................ 32.500 Variance ((c/s)**2).......... 24.964 +/- 4.6 Expected Variance ((c/s)**2). 0.91589 +/- 0.17 Third Moment ((c/s)**3)...... -350.91 Average Deviation (c/s)...... 2.9000 Skewness..................... -2.8133 +/- 0.32 Kurtosis..................... 6.9313 +/- 0.63 RMS fractional variation..... 0.17371 +/- 0.17E-01 Chi-Square................... 1126.8 dof 59 Chi-Square Prob of constancy. 0. (0 means < 1.e-38) Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38) [4]xronos> [5]xronos> Maximum of 1 Intvs. with 512 Newbins of 33.4767 (s) Intv 1 Start 9093 4:29:32 Ser.1 Avg 28.23 Chisq 1127. Var 24.96 Newbs. 60 Min 7.562 Max 32.50 expVar 0.9159 Bins 119 Light curve ready ! Frme 1 Written to output file : xronos.qlc1 PLT> PLT> PLT> [6]xronos>-> Standard Error Output From FTOOL xronos
Note: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> TIMEDEL=1.6000000000E+01 for ad10012010s100102m.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.40E+02 893 1111 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.40E+02 893 1111 2 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.44E+02 981 1111 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.40E+02 893 1111 2 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.44E+02 981 1111 3 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.18E+04 57350 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100102m.evt Total Good Bad: Region Time Phase Cut 893 289 604 0 0 0 Writing events file 289 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100202h.evt Total Good Bad: Region Time Phase Cut 981 288 693 0 0 0 Writing events file 577 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100302h.evt Total Good Bad: Region Time Phase Cut 57350 45179 12171 0 0 0 Writing events file 45756 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 59224 45756 13468 0 0 0 in 1934.02 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s100102m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > read events ad10012010s100202h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > read events ad10012010s100302h.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting ad10012010s100002_1.lc with binsize 1.6000000000E+01
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.19E+04 45756 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 45756 45756 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 45756 45756 0 0 0 0 in 1934.02 seconds Fits light curve has 45756 counts for 23.66 counts/sec Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > set binsize 1.6000000000E+01 !xsel:ASCA-SIS1-BRIGHT > extract curve exposure=0.5 !xsel:ASCA-SIS1-BRIGHT > save curve ad10012010s100002_1.lc Wrote FITS light curve to file ad10012010s100002_1.lc !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Plotting light curve ad10012010s100002_1_lc.ps
Type "help" for information [1]xronos> Current User Interface is ; command driven [2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn) Ser. A filename 1 +options[.rbf]=> ad10012010s100002_1.lc Selected FITS extensions: 1 - RATE TABLE; Source ............ X0614+091 Start Time (d) .... 9093 04:29:48.119 FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9093 09:15:08.119 No. of Rows ....... 120 Bin Time (s) ...... 16.00 Right Ascension ... 9.4254E+01 Internal time sys.. Converted to TJD Declination ....... 9.1754E+00 Experiment ........ ASCA SIS1 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error; File contains binned data. Ser. A filename 2 +options[.rbf]=> Enter up to 50 input filenames and options for series 2 (or rtn) Ser. B filename 1 +options[.rbf]=> Enter up to 50 input filenames and options for series 3 (or rtn) Ser. C filename 1 +options[.rbf]=> [3]xronos> Maximum of 1 Intvs. with 512 Newbins of 33.4767 (s) Intv 1 Start 9093 4:30:20 Ser.1 Avg 23.29 Chisq 603.7 Var 21.31 Newbs. 60 Min 6.000 Max 31.18 expVar 0.7392 Bins 120 Results from Statistical Analysis Newbin Integration Time (s).. 33.477 Interval Duration (s)........ 17073. No. of Newbins .............. 60 Average (c/s) ............... 23.286 +/- 0.11 Standard Deviation (c/s)..... 4.6157 Minimum (c/s)................ 6.0000 Maximum (c/s)................ 31.176 Variance ((c/s)**2).......... 21.305 +/- 3.9 Expected Variance ((c/s)**2). 0.73921 +/- 0.14 Third Moment ((c/s)**3)...... -299.11 Average Deviation (c/s)...... 2.2970 Skewness..................... -3.0417 +/- 0.32 Kurtosis..................... 8.5884 +/- 0.63 RMS fractional variation..... 0.19475 +/- 0.19E-01 Chi-Square................... 603.72 dof 59 Chi-Square Prob of constancy. 0. (0 means < 1.e-38) Kolm.-Smir. Prob of constancy 0.54585E-14 (0 means < 1.e-38) [4]xronos> [5]xronos> Maximum of 1 Intvs. with 512 Newbins of 33.4767 (s) Intv 1 Start 9093 4:30:20 Ser.1 Avg 23.29 Chisq 603.7 Var 21.31 Newbs. 60 Min 6.000 Max 31.18 expVar 0.7392 Bins 120 Light curve ready ! Frme 1 Written to output file : xronos.qlc1 PLT> PLT> PLT> [6]xronos>-> Standard Error Output From FTOOL xronos
Note: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> TIMEDEL=6.2500000000E-02 for ad10012010g200170h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 148513 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 148513 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 89664 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 148513 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 89664 1024 3 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.96E+02 1410 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.evt Total Good Bad: Region Time Phase Cut 148513 130336 18177 0 0 0 Writing events file 130336 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.evt Total Good Bad: Region Time Phase Cut 89664 78117 11547 0 0 0 Writing events file 208453 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.evt Total Good Bad: Region Time Phase Cut 1410 1246 164 0 0 0 Writing events file 209699 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 239587 209699 29888 0 0 0 in 11338.03 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g200170h.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > read events ad10012010g200270m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > read events ad10012010g200370m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > filter region ad10012010g225670_1.reg !xsel:ASCA-GIS2-PH > extract events !xsel:ASCA-GIS2-PH > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-GIS2-PH > exit save_session=no-> Extracting ad10012010g200070_1.lc with binsize 2.70340593255181
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 03:37:48 0.11E+05 209699 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 209699 209699 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 209699 209699 0 0 0 0 in 11338.03 seconds Fits light curve has 209699 counts for 18.50 counts/sec Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > set binsize 2.70340593255181 !xsel:ASCA-GIS2-PH > extract curve exposure=0.5 !xsel:ASCA-GIS2-PH > save curve ad10012010g200070_1.lc Wrote FITS light curve to file ad10012010g200070_1.lc !xsel:ASCA-GIS2-PH > exit save_session=no-> Plotting light curve ad10012010g200070_1_lc.ps
Type "help" for information [1]xronos> Current User Interface is ; command driven [2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn) Ser. A filename 1 +options[.rbf]=> ad10012010g200070_1.lc Selected FITS extensions: 1 - RATE TABLE; Source ............ X0614+091 Start Time (d) .... 9093 04:01:00.119 FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9093 09:48:12.119 No. of Rows ....... 4194 Bin Time (s) ...... 2.703 Right Ascension ... 9.4254E+01 Internal time sys.. Converted to TJD Declination ....... 9.1754E+00 Experiment ........ ASCA GIS2 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error; File contains binned data. Ser. A filename 2 +options[.rbf]=> Enter up to 50 input filenames and options for series 2 (or rtn) Ser. B filename 1 +options[.rbf]=> Enter up to 50 input filenames and options for series 3 (or rtn) Ser. C filename 1 +options[.rbf]=> [3]xronos> Maximum of 1 Intvs. with 512 Newbins of 40.7352 (s) Intv 1 Start 9093 4: 1:20 Ser.1 Avg 18.42 Chisq 0.2461E+05 Var 40.50 Newbs. 286 Min 9.525 Max 32.67 expVar 0.4812 Bins 4194 Results from Statistical Analysis Newbin Integration Time (s).. 40.735 Interval Duration (s)........ 20816. No. of Newbins .............. 286 Average (c/s) ............... 18.421 +/- 0.41E-01 Standard Deviation (c/s)..... 6.3643 Minimum (c/s)................ 9.5250 Maximum (c/s)................ 32.675 Variance ((c/s)**2).......... 40.504 +/- 3.4 Expected Variance ((c/s)**2). 0.48123 +/- 0.40E-01 Third Moment ((c/s)**3)...... 141.94 Average Deviation (c/s)...... 5.9530 Skewness..................... 0.55065 +/- 0.14 Kurtosis..................... -1.0739 +/- 0.29 RMS fractional variation..... 0.34343 +/- 0.15E-01 Chi-Square................... 24607. dof 285 Chi-Square Prob of constancy. 0. (0 means < 1.e-38) Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38) [4]xronos> [5]xronos> Maximum of 1 Intvs. with 512 Newbins of 40.7352 (s) Intv 1 Start 9093 4: 1:20 Ser.1 Avg 18.42 Chisq 0.2461E+05 Var 40.50 Newbs. 286 Min 9.525 Max 32.67 expVar 0.4812 Bins 4194 Light curve ready ! Frme 1 Written to output file : xronos.qlc1 PLT> PLT> PLT> [6]xronos>-> Standard Error Output From FTOOL xronos
Note: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> TIMEDEL=6.2500000000E-02 for ad10012010g300170h.evt
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 131848 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 131848 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 87978 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 131848 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 87978 1024 3 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.96E+02 1408 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.evt Total Good Bad: Region Time Phase Cut 131848 114773 17075 0 0 0 Writing events file 114773 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.evt Total Good Bad: Region Time Phase Cut 87978 76177 11801 0 0 0 Writing events file 190950 events written to the output file Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.evt Total Good Bad: Region Time Phase Cut 1408 1246 162 0 0 0 Writing events file 192196 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 221234 192196 29038 0 0 0 in 11338.03 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g300170h.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > read events ad10012010g300270m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > read events ad10012010g300370m.evt Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > filter region ad10012010g325670_1.reg !xsel:ASCA-GIS3-PH > extract events !xsel:ASCA-GIS3-PH > save events outfile=events.tmp use_events=yes Wrote events list to file events.tmp Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-GIS3-PH > exit save_session=no-> Extracting ad10012010g300070_1.lc with binsize 2.94960103566246
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 03:37:48 0.11E+05 192196 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/events.tmp Total Good Bad: Region Time Phase Cut 192196 192196 0 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 192196 192196 0 0 0 0 in 11338.03 seconds Fits light curve has 192196 counts for 16.95 counts/sec Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events events.tmp Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > set binsize 2.94960103566246 !xsel:ASCA-GIS3-PH > extract curve exposure=0.5 !xsel:ASCA-GIS3-PH > save curve ad10012010g300070_1.lc Wrote FITS light curve to file ad10012010g300070_1.lc !xsel:ASCA-GIS3-PH > exit save_session=no-> Plotting light curve ad10012010g300070_1_lc.ps
Type "help" for information [1]xronos> Current User Interface is ; command driven [2]xronos> Enter up to 50 input filenames and options for series 1 (or rtn) Ser. A filename 1 +options[.rbf]=> ad10012010g300070_1.lc Selected FITS extensions: 1 - RATE TABLE; Source ............ X0614+091 Start Time (d) .... 9093 04:01:00.119 FITS Extension .... 1 - `RATE ` Stop Time (d) ..... 9093 09:48:12.119 No. of Rows ....... 3843 Bin Time (s) ...... 2.950 Right Ascension ... 9.4254E+01 Internal time sys.. Converted to TJD Declination ....... 9.1754E+00 Experiment ........ ASCA GIS3 Corrections applied: Vignetting - No ; Deadtime - No ; Bkgd - No ; Clock - No Selected Columns: 1 - Time; 2 - Y-axis; 3 - Y-error; File contains binned data. Ser. A filename 2 +options[.rbf]=> Enter up to 50 input filenames and options for series 2 (or rtn) Ser. B filename 1 +options[.rbf]=> Enter up to 50 input filenames and options for series 3 (or rtn) Ser. C filename 1 +options[.rbf]=> [3]xronos> Maximum of 1 Intvs. with 512 Newbins of 40.7352 (s) Intv 1 Start 9093 4: 1:20 Ser.1 Avg 16.89 Chisq 0.1686E+05 Var 25.66 Newbs. 286 Min 9.747 Max 29.34 expVar 0.4452 Bins 3843 Results from Statistical Analysis Newbin Integration Time (s).. 40.735 Interval Duration (s)........ 20816. No. of Newbins .............. 286 Average (c/s) ............... 16.891 +/- 0.40E-01 Standard Deviation (c/s)..... 5.0660 Minimum (c/s)................ 9.7471 Maximum (c/s)................ 29.339 Variance ((c/s)**2).......... 25.665 +/- 2.1 Expected Variance ((c/s)**2). 0.44521 +/- 0.37E-01 Third Moment ((c/s)**3)...... 85.720 Average Deviation (c/s)...... 4.6403 Skewness..................... 0.65929 +/- 0.14 Kurtosis.....................-0.79505 +/- 0.29 RMS fractional variation..... 0.29731 +/- 0.13E-01 Chi-Square................... 16864. dof 285 Chi-Square Prob of constancy. 0. (0 means < 1.e-38) Kolm.-Smir. Prob of constancy 0. (0 means < 1.e-38) [4]xronos> [5]xronos> Maximum of 1 Intvs. with 512 Newbins of 40.7352 (s) Intv 1 Start 9093 4: 1:20 Ser.1 Avg 16.89 Chisq 0.1686E+05 Var 25.66 Newbs. 286 Min 9.747 Max 29.34 expVar 0.4452 Bins 3843 Light curve ready ! Frme 1 Written to output file : xronos.qlc1 PLT> PLT> PLT> [6]xronos>-> Standard Error Output From FTOOL xronos
Note: the following IEEE floating-point arithmetic exceptions occurred and were never cleared; see ieee_flags(3M): Inexact; Underflow; Sun's implementation of IEEE arithmetic is discussed in the Numerical Computation Guide.-> Merging GTIs from the following files:
ad10012010g200170h.evt[2] ad10012010g200270m.evt[2] ad10012010g200370m.evt[2]-> Making L1 light curve of ft930416_0325_0950G2HK.fits with irate=HIGH
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 40682 output records from 40689 good input G2_L1 records.-> Making L1 light curve of ft930416_0325_0950G2HK.fits with irate=HI+MED
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 11323 output records from 46831 good input G2_L1 records.-> Merging GTIs from the following files:
ad10012010g300170h.evt[2] ad10012010g300270m.evt[2] ad10012010g300370m.evt[2]-> Making L1 light curve of ft930416_0325_0950G3HK.fits with irate=HIGH
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 40275 output records from 40282 good input G3_L1 records.-> Making L1 light curve of ft930416_0325_0950G3HK.fits with irate=HI+MED
ghkcurve: ALLGTI found in input HK file, will be applied to data. ghkcurve: 11322 output records from 46424 good input G3_L1 records.
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 148513 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.evt Total Good Bad: Region Time Phase Cut 148513 130336 18177 0 0 0 Writing events file 130336 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 148513 130336 18177 0 0 0 in 5193.99 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g200170h.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > filter region ad10012010g225670_1.reg !xsel:ASCA-GIS2-PH > extract events !xsel:ASCA-GIS2-PH > save events outfile=ad10012010g200170h_1.ulc use_events=yes Wrote events list to file ad10012010g200170h_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-GIS2-PH > exit save_session=no-> Extracting unbinned light curve ad10012010g200270m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 89664 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.evt Total Good Bad: Region Time Phase Cut 89664 78117 11547 0 0 0 Writing events file 78117 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 89664 78117 11547 0 0 0 in 6048.04 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g200270m.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > filter region ad10012010g225670_1.reg !xsel:ASCA-GIS2-PH > extract events !xsel:ASCA-GIS2-PH > save events outfile=ad10012010g200270m_1.ulc use_events=yes Wrote events list to file ad10012010g200270m_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-GIS2-PH > exit save_session=no-> Extracting unbinned light curve ad10012010g200370m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.96E+02 1410 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.evt Total Good Bad: Region Time Phase Cut 1410 1246 164 0 0 0 Writing events file 1246 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1410 1246 164 0 0 0 in 96.00 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g200370m.evt Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > filter region ad10012010g225670_1.reg !xsel:ASCA-GIS2-PH > extract events !xsel:ASCA-GIS2-PH > save events outfile=ad10012010g200370m_1.ulc use_events=yes Wrote events list to file ad10012010g200370m_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-GIS2-PH > exit save_session=no-> Extracting unbinned light curve ad10012010g300170h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.52E+04 131848 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.evt Total Good Bad: Region Time Phase Cut 131848 114773 17075 0 0 0 Writing events file 114773 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 131848 114773 17075 0 0 0 in 5193.99 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g300170h.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > filter region ad10012010g325670_1.reg !xsel:ASCA-GIS3-PH > extract events !xsel:ASCA-GIS3-PH > save events outfile=ad10012010g300170h_1.ulc use_events=yes Wrote events list to file ad10012010g300170h_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-GIS3-PH > exit save_session=no-> Extracting unbinned light curve ad10012010g300270m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.60E+04 87978 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.evt Total Good Bad: Region Time Phase Cut 87978 76177 11801 0 0 0 Writing events file 76177 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 87978 76177 11801 0 0 0 in 6048.04 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g300270m.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > filter region ad10012010g325670_1.reg !xsel:ASCA-GIS3-PH > extract events !xsel:ASCA-GIS3-PH > save events outfile=ad10012010g300270m_1.ulc use_events=yes Wrote events list to file ad10012010g300270m_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-GIS3-PH > exit save_session=no-> Extracting unbinned light curve ad10012010g300370m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.96E+02 1408 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.evt Total Good Bad: Region Time Phase Cut 1408 1246 162 0 0 0 Writing events file 1246 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1408 1246 162 0 0 0 in 96.00 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g300370m.evt Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > filter region ad10012010g325670_1.reg !xsel:ASCA-GIS3-PH > extract events !xsel:ASCA-GIS3-PH > save events outfile=ad10012010g300370m_1.ulc use_events=yes Wrote events list to file ad10012010g300370m_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-GIS3-PH > exit save_session=no-> Extracting unbinned light curve ad10012010s000102m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.20E+02 602 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000102m.evt Total Good Bad: Region Time Phase Cut 602 250 352 0 0 0 Writing events file 250 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 602 250 352 0 0 0 in 20.01 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s000102m.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad10012010s000102m_1.ulc use_events=yes Wrote events list to file ad10012010s000102m_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad10012010s000202h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.66E+02 1620 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000202h.evt Total Good Bad: Region Time Phase Cut 1620 970 650 0 0 0 Writing events file 970 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1620 970 650 0 0 0 in 65.95 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s000202h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad10012010s000202h_1.ulc use_events=yes Wrote events list to file ad10012010s000202h_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad10012010s000212h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.66E+02 1627 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000212h.evt Total Good Bad: Region Time Phase Cut 1627 974 653 0 0 0 Writing events file 974 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 1627 974 653 0 0 0 in 65.95 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s000212h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT2 > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT2 > extract events !xsel:ASCA-SIS0-BRIGHT2 > save events outfile=ad10012010s000212h_1.ulc use_events=yes Wrote events list to file ad10012010s000212h_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT2 > exit save_session=no-> Extracting unbinned light curve ad10012010s000302h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.18E+04 66758 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000302h.evt Total Good Bad: Region Time Phase Cut 66758 53247 13511 0 0 0 Writing events file 53247 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 66758 53247 13511 0 0 0 in 1821.97 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s000302h.evt Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS0-BRIGHT > filter region ad10012010s032002_1.reg !xsel:ASCA-SIS0-BRIGHT > extract events !xsel:ASCA-SIS0-BRIGHT > save events outfile=ad10012010s000302h_1.ulc use_events=yes Wrote events list to file ad10012010s000302h_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS0-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad10012010s100102m_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.40E+02 893 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100102m.evt Total Good Bad: Region Time Phase Cut 893 289 604 0 0 0 Writing events file 289 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 893 289 604 0 0 0 in 40.09 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s100102m.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10012010s100102m_1.ulc use_events=yes Wrote events list to file ad10012010s100102m_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad10012010s100202h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.44E+02 981 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100202h.evt Total Good Bad: Region Time Phase Cut 981 288 693 0 0 0 Writing events file 288 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 981 288 693 0 0 0 in 43.96 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s100202h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10012010s100202h_1.ulc use_events=yes Wrote events list to file ad10012010s100202h_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no-> Extracting unbinned light curve ad10012010s100212h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.44E+02 986 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100212h.evt Total Good Bad: Region Time Phase Cut 986 289 697 0 0 0 Writing events file 289 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 986 289 697 0 0 0 in 43.96 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s100212h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT2 > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT2 > extract events !xsel:ASCA-SIS1-BRIGHT2 > save events outfile=ad10012010s100212h_1.ulc use_events=yes Wrote events list to file ad10012010s100212h_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT2 > exit save_session=no-> Extracting unbinned light curve ad10012010s100302h_1.ulc
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.18E+04 57350 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100302h.evt Total Good Bad: Region Time Phase Cut 57350 45179 12171 0 0 0 Writing events file 45179 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 57350 45179 12171 0 0 0 in 1849.97 seconds Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010s100302h.evt Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-SIS1-BRIGHT > filter region ad10012010s132002_1.reg !xsel:ASCA-SIS1-BRIGHT > extract events !xsel:ASCA-SIS1-BRIGHT > save events outfile=ad10012010s100302h_1.ulc use_events=yes Wrote events list to file ad10012010s100302h_1.ulc Changing Data directory from: /data/data17/seq_proc/10012010.008/ to the current working directory. !xsel:ASCA-SIS1-BRIGHT > exit save_session=no
*** tlmFrm Version 1.1 (1997-08-25) *** total number of superframes: 3992 Total of 0 sets of frame data are extracted.
1 ad10012010g200170h.unf 312856 1 ad10012010g200270m.unf 312856 1 ad10012010g200370m.unf 312856-> Fetching GIS2_CALSRC256.2
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 174958 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 174958 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 136308 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 174958 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 136308 1024 3 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.13E+03 1590 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.unf Total Good Bad: Region Time Phase Cut 174958 2924 172034 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.unf Total Good Bad: Region Time Phase Cut 136308 4345 131963 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.unf Total Good Bad: Region Time Phase Cut 1590 36 1554 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 312856 7305 305551 0 0 0 in 19283.93 seconds Spectrum has 7305 counts for 0.3788 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS2 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 19284. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 3.57971E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1992a OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010g220170.cal Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g200170h.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > read events ad10012010g200270m.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > read events ad10012010g200370m.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS2-PH > filter region GIS2_CALSRC256.2 !xsel:ASCA-GIS2-PH > extract spectrum !xsel:ASCA-GIS2-PH > save spectrum ad10012010g220170.cal group=yes Wrote spectrum to ad10012010g220170.cal !xsel:ASCA-GIS2-PH > exit save_session=no-> gis2v4_0.rmf already present in current directory
XSPEC 9.01 02:50:51 12-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> query yes Querying disabled - assuming answer is yes !XSPEC> data ad10012010g220170.cal Net count rate (cts/s) for file 1 0.3788 +/- 4.4343E-03 1 data set is in use !XSPEC> ignore bad !XSPEC> ignore **-4.0 !XSPEC> ignore 8.0-** !XSPEC> model const/b + gauss/b + gauss/b Background components must be from the additive model list mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Input parameter value, delta, min, bot, top, and max values for ... Mod parameter 1 of component 1 constant factor 1.000 1.0000E-02 0. 0. 1.0000E+10 1.0000E+10 ! Mod parameter 2 of component 2 gaussian LineE 6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06 ! 5.9 Mod parameter 3 of component 2 gaussian Sigma 0.1000 5.0000E-02 0. 0. 10.00 20.00 ! 0.0 Mod parameter 4 of component 2 gaussian norm 1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24 ! Mod parameter 5 of component 3 gaussian LineE 6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06 ! 6.5 Mod parameter 6 of component 3 gaussian Sigma 0.1000 5.0000E-02 0. 0. 10.00 20.00 ! 0.0 Mod parameter 7 of component 3 gaussian norm 1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24 ! --------------------------------------------------------------------------- --------------------------------------------------------------------------- mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Model Fit Model Component Parameter Value par par comp 1 1 1 constant factor 1.00000 +/- 0. 2 2 2 gaussian/b LineE 5.90000 +/- 0. 3 3 2 gaussian/b Sigma 0. +/- 0. 4 4 2 gaussian/b norm 1.00000 +/- 0. 5 5 3 gaussian/b LineE 6.50000 +/- 0. 6 6 3 gaussian/b Sigma 0. +/- 0. 7 7 3 gaussian/b norm 1.00000 +/- 0. --------------------------------------------------------------------------- --------------------------------------------------------------------------- 7 variable fit parameters Chi-Squared = 3.6711E+05 using 84 PHA bins. Reduced chi-squared = 4768. !XSPEC> newpar 5 = 2 1.101005 6 variable fit parameters Chi-Squared = 3.6419E+05 using 84 PHA bins. Reduced chi-squared = 4669. !XSPEC> newpar 6 = 3 1.049288 5 variable fit parameters Chi-Squared = 3.6419E+05 using 84 PHA bins. Reduced chi-squared = 4610. !XSPEC> renorm Chi-Squared = 2066. using 84 PHA bins. Reduced chi-squared = 26.15 !XSPEC> fit Chi-Squared Lvl Fit param # 1 2 3 4 5 Due to zero model norms fit parameter 1 is temporarily frozen 1593.5 0 1.000 5.892 0.1249 9.6288E-02 8.3756E-02 Due to zero model norms fit parameter 1 is temporarily frozen 637.53 0 1.000 5.857 0.1800 0.1493 7.4391E-02 Due to zero model norms fit parameter 1 is temporarily frozen 289.48 -1 1.000 5.910 0.2001 0.2147 4.7682E-02 Due to zero model norms fit parameter 1 is temporarily frozen 273.25 -2 1.000 5.938 0.2144 0.2359 3.3363E-02 Due to zero model norms fit parameter 1 is temporarily frozen 270.03 -3 1.000 5.922 0.2004 0.2288 4.0356E-02 Due to zero model norms fit parameter 1 is temporarily frozen 269.62 -4 1.000 5.930 0.2059 0.2325 3.6615E-02 Due to zero model norms fit parameter 1 is temporarily frozen 269.31 -5 1.000 5.926 0.2026 0.2307 3.8443E-02 Due to zero model norms fit parameter 1 is temporarily frozen 269.29 -1 1.000 5.927 0.2034 0.2312 3.7888E-02 Due to zero model norms fit parameter 1 is temporarily frozen 269.29 2 1.000 5.927 0.2034 0.2312 3.7888E-02 --------------------------------------------------------------------------- --------------------------------------------------------------------------- mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Model Fit Model Component Parameter Value par par comp 1 1 1 constant factor 1.00000 +/- -1.0000 2 2 2 gaussian/b LineE 5.92679 +/- 0.78746E-02 3 3 2 gaussian/b Sigma 0.203399 +/- 0.80596E-02 4 4 2 gaussian/b norm 0.231228 +/- 0.47046E-02 5 2 3 gaussian/b LineE 6.52542 = par 2 * 1.1010 6 3 3 gaussian/b Sigma 0.213424 = par 3 * 1.0493 7 5 3 gaussian/b norm 3.788769E-02 +/- 0.34317E-02 --------------------------------------------------------------------------- --------------------------------------------------------------------------- Chi-Squared = 269.3 using 84 PHA bins. Reduced chi-squared = 3.409 !XSPEC> setplot energy !XSPEC> iplot data !PLT> label top GIS2 Calibration Source, should peak near 5.9 keV !PLT> log x off !PLT> rescale x 4 8 !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Calibration source ad10012010g220170.cal peaks at 5.92679 +/- 0.0078746 keV
1 ad10012010g300170h.unf 293422 1 ad10012010g300270m.unf 293422 1 ad10012010g300370m.unf 293422-> Fetching GIS3_CALSRC256.2
** XSELECT V1.3 ** !> Enter session name >[xsel] xsel Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 156908 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 156908 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 134921 1024 OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 156908 1024 2 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 134921 1024 3 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.13E+03 1593 1024 EXTRACTOR vers 2.0 11 Apr 1997. Getting FITS WCS Keywords Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.unf Total Good Bad: Region Time Phase Cut 156908 2958 153950 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.unf Total Good Bad: Region Time Phase Cut 134921 4312 130609 0 0 0 Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.unf Total Good Bad: Region Time Phase Cut 1593 44 1549 0 0 0 =============================================================================== Grand Total Good Bad: Region Time Phase Cut 293422 7314 286108 0 0 0 in 19283.93 seconds Spectrum has 7314 counts for 0.3793 counts/sec ------------------------- MANDATORY KEYWORDS/VALUES ------------------------- -------------------------------------------------------------------- -------------------------------------------------------------------- EXTNAME - SPECTRUM Name of this BINTABLE TELESCOP - ASCA Mission/Satellite name INSTRUME - GIS3 Instrument/Detector FILTER - Instrument filter in use EXPOSURE - 19284. Integration time (in secs) of PHA data AREASCAL - 1.0000 Area scaling factor BACKSCAL - 2.83356E-02 Background scaling factor BACKFILE - NONE Associated background file CORRSCAL - 1.0000 Correlation scaling factor CORRFILE - none Associated correlation file RESPFILE - NONE Associated redistribution matrix file ANCRFILE - none Associated ancillary response file XFLT0001 - none XSPEC selection filter POISSERR - TRUE Whether Poissonian errors apply CHANTYPE - PI Whether channels have been corrected TLMIN1 - 0 First legal Detector channel DETCHANS - 1024 No. of legal detector channels NCHAN - 1024 No. of detector channels in dataset PHAVERSN - 1992a OGIP FITS version number STAT_ERR - FALSE Statistical Error SYS_ERR - TRUE Fractional Systematic Error QUALITY - TRUE Quality Flag GROUPING - FALSE Grouping Flag -------------------------------------------------------------------- -------------------------------------------------------------------- ... ... -------- ... GROUPING ... -------- ... --------------------------------------------- ... Channel Grouping (Channel-Channel) : ... --------------------------------------------- ... ...... exiting, changes written to file : ad10012010g320170.cal Command not found; type ? for a command listing !xsel:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !xsel:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !xsel:ASCA > read events ad10012010g300170h.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > read events ad10012010g300270m.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 2 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > read events ad10012010g300370m.unf Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 3 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !xsel:ASCA-GIS3-PH > filter region GIS3_CALSRC256.2 !xsel:ASCA-GIS3-PH > extract spectrum !xsel:ASCA-GIS3-PH > save spectrum ad10012010g320170.cal group=yes Wrote spectrum to ad10012010g320170.cal !xsel:ASCA-GIS3-PH > exit save_session=no-> gis3v4_0.rmf already present in current directory
XSPEC 9.01 02:53:00 12-Mar-98 Plot device not set, use "cpd" to set it Type "help" or "?" for further information !XSPEC> query yes Querying disabled - assuming answer is yes !XSPEC> data ad10012010g320170.cal Net count rate (cts/s) for file 1 0.3793 +/- 4.4385E-03 1 data set is in use !XSPEC> ignore bad !XSPEC> ignore **-4.0 !XSPEC> ignore 8.0-** !XSPEC> model const/b + gauss/b + gauss/b Background components must be from the additive model list mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Input parameter value, delta, min, bot, top, and max values for ... Mod parameter 1 of component 1 constant factor 1.000 1.0000E-02 0. 0. 1.0000E+10 1.0000E+10 ! Mod parameter 2 of component 2 gaussian LineE 6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06 ! 5.9 Mod parameter 3 of component 2 gaussian Sigma 0.1000 5.0000E-02 0. 0. 10.00 20.00 ! 0.0 Mod parameter 4 of component 2 gaussian norm 1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24 ! Mod parameter 5 of component 3 gaussian LineE 6.500 5.0000E-02 0. 0. 1.0000E+06 1.0000E+06 ! 6.5 Mod parameter 6 of component 3 gaussian Sigma 0.1000 5.0000E-02 0. 0. 10.00 20.00 ! 0.0 Mod parameter 7 of component 3 gaussian norm 1.000 1.0000E-02 0. 0. 1.0000E+24 1.0000E+24 ! --------------------------------------------------------------------------- --------------------------------------------------------------------------- mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Model Fit Model Component Parameter Value par par comp 1 1 1 constant factor 1.00000 +/- 0. 2 2 2 gaussian/b LineE 5.90000 +/- 0. 3 3 2 gaussian/b Sigma 0. +/- 0. 4 4 2 gaussian/b norm 1.00000 +/- 0. 5 5 3 gaussian/b LineE 6.50000 +/- 0. 6 6 3 gaussian/b Sigma 0. +/- 0. 7 7 3 gaussian/b norm 1.00000 +/- 0. --------------------------------------------------------------------------- --------------------------------------------------------------------------- 7 variable fit parameters Chi-Squared = 3.3313E+05 using 84 PHA bins. Reduced chi-squared = 4326. !XSPEC> newpar 5 = 2 1.101005 6 variable fit parameters Chi-Squared = 3.3059E+05 using 84 PHA bins. Reduced chi-squared = 4238. !XSPEC> newpar 6 = 3 1.049288 5 variable fit parameters Chi-Squared = 3.3059E+05 using 84 PHA bins. Reduced chi-squared = 4185. !XSPEC> renorm Chi-Squared = 1754. using 84 PHA bins. Reduced chi-squared = 22.20 !XSPEC> fit Chi-Squared Lvl Fit param # 1 2 3 4 5 Due to zero model norms fit parameter 1 is temporarily frozen 1416.1 0 1.000 5.894 9.4951E-02 0.1022 9.0934E-02 Due to zero model norms fit parameter 1 is temporarily frozen 700.12 0 1.000 5.874 0.1439 0.1458 7.9790E-02 Due to zero model norms fit parameter 1 is temporarily frozen 338.07 -1 1.000 5.930 0.1646 0.2020 5.3650E-02 Due to zero model norms fit parameter 1 is temporarily frozen 267.18 -2 1.000 5.984 0.1888 0.2349 3.2354E-02 Due to zero model norms fit parameter 1 is temporarily frozen 263.97 -3 1.000 5.973 0.1781 0.2309 3.6270E-02 Due to zero model norms fit parameter 1 is temporarily frozen 263.83 -4 1.000 5.975 0.1783 0.2317 3.5426E-02 Due to zero model norms fit parameter 1 is temporarily frozen 263.81 -5 1.000 5.974 0.1778 0.2316 3.5616E-02 Due to zero model norms fit parameter 1 is temporarily frozen 263.81 -6 1.000 5.974 0.1778 0.2316 3.5585E-02 --------------------------------------------------------------------------- --------------------------------------------------------------------------- mo = constant[1] ) + gaussian/b[2] + gaussian/b[3] Model Fit Model Component Parameter Value par par comp 1 1 1 constant factor 1.00000 +/- -1.0000 2 2 2 gaussian/b LineE 5.97418 +/- 0.66028E-02 3 3 2 gaussian/b Sigma 0.177812 +/- 0.74332E-02 4 4 2 gaussian/b norm 0.231583 +/- 0.42988E-02 5 2 3 gaussian/b LineE 6.57760 = par 2 * 1.1010 6 3 3 gaussian/b Sigma 0.186576 = par 3 * 1.0493 7 5 3 gaussian/b norm 3.558463E-02 +/- 0.28277E-02 --------------------------------------------------------------------------- --------------------------------------------------------------------------- Chi-Squared = 263.8 using 84 PHA bins. Reduced chi-squared = 3.339 !XSPEC> setplot energy !XSPEC> iplot data !PLT> label top GIS3 Calibration Source, should peak near 5.9 keV !PLT> log x off !PLT> rescale x 4 8 !PLT> hard /ps !PLT> quit !XSPEC> exit !Do you really want to exit (y) y XSPEC: quit-> Calibration source ad10012010g320170.cal peaks at 5.97418 +/- 0.0066028 keV
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.15E+05 219041 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s000102m.unf Total Good Bad: Region Time Phase Cut 219041 27395 0 191646 0 0 Writing events file 27395 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 219041 27395 0 191646 0 0 in 4293.98 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010s000102m.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad10012010s000102m.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad10012010s000102m.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 27395 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 75 16477 Flickering pixels iter, pixels & cnts : 1 53 539 cleaning chip # 1 Hot pixels & counts : 27 3515 Flickering pixels iter, pixels & cnts : 1 32 168 cleaning chip # 2 Hot pixels & counts : 26 1693 Flickering pixels iter, pixels & cnts : 1 70 450 cleaning chip # 3 Hot pixels & counts : 22 2343 Flickering pixels iter, pixels & cnts : 1 53 367 Number of pixels rejected : 358 Number of (internal) image counts : 27395 Number of image cts rejected (N, %) : 25552 93.2724915 By chip : 0 1 2 3 Pixels rejected : 128 59 96 75 Image counts : 17442 4141 2619 3193 Image cts rejected: 17016 3683 2143 2710 Image cts rej (%) : 97.56 88.94 81.83 84.87 filtering data... Total counts : 17442 4141 2619 3193 Total cts rejected: 17016 3683 2143 2710 Total cts rej (%) : 97.56 88.94 81.83 84.87 Number of clean counts accepted : 1843 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 358 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad10012010s000202h.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.34E+04 96535 1111 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010s000202h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010s000202h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad10012010s000202h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.34E+04 102106 1111 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010s000212h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010s000212h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-SIS0-BRIGHT2 > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT2 > extract events !earthevents:ASCA-SIS0-BRIGHT2 > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT2 > exit save_session=no-> Deleting ad10012010s000212h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S0CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.26E+04 92004 1111 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010s000302h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010s000302h.unf Got new instrument: SIS0 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-SIS0-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS0-BRIGHT > extract events !earthevents:ASCA-SIS0-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS0-BRIGHT > exit save_session=no-> Deleting ad10012010s000302h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT MEDIUM 16/04/93 03:29:48 0.15E+05 240752 1111 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010s100102m.unf Total Good Bad: Region Time Phase Cut 240752 23391 0 217361 0 0 Writing events file 23391 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 240752 23391 0 217361 0 0 in 4313.48 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010s100102m.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Cleaning hot pixels from ad10012010s100102m.unf
CLEANSIS_V1.6 allocating image arrays... PROGRAM TO MAKE AN SIS SCIENCE FILE CLEANED OF ANOMALOUS PIXELS. * Anomalous pixels may consist of at least two populations. 1. Persistent HOT pixels are removed by comparing to the chip mean. 2. Flickering WARM pixels are removed by comparing to the cell mean. 3. In faint areas (zero bgd), flickering pixels are removed with a cutoff threshold. Hints: Choose cell size and thresholds based on the expected background and the PSF. Use the DIRTYSIS option to examine the anomalous pixel spectra. Try a multiple pass clean: Choose a PHA cut to optimize the S/N of the flickering pixels, then a broad band clean. Be suspicious of extended source cleans. For very bright sources you may need to turn off the iteration option. See the help page for further info (fhelp cleansis) Poisson clean cell size : 5 Poisson probability threshold : 0.575E-05 Zero Bgd Cutoff threshold (>) : 3 Iterate : F Dirtysis : F Minimum PHA value (inclusive) : 0 Maximum PHA value (inclusive) : 4095 open output file: ad10012010s100102m.drk reading data file: event.tmp copying primary header to output file... making chip image... Total counts in chip images : 23391 copy bad pix array... cleaning chip # 0 Hot pixels & counts : 35 4161 Flickering pixels iter, pixels & cnts : 1 49 412 cleaning chip # 1 Hot pixels & counts : 36 6254 Flickering pixels iter, pixels & cnts : 1 35 352 cleaning chip # 2 Hot pixels & counts : 31 5077 Flickering pixels iter, pixels & cnts : 1 32 263 cleaning chip # 3 Hot pixels & counts : 31 5109 Flickering pixels iter, pixels & cnts : 1 32 346 Number of pixels rejected : 281 Number of (internal) image counts : 23391 Number of image cts rejected (N, %) : 21974 93.9421158 By chip : 0 1 2 3 Pixels rejected : 84 71 63 63 Image counts : 4952 6959 5698 5782 Image cts rejected: 4573 6606 5340 5455 Image cts rej (%) : 92.35 94.93 93.72 94.34 filtering data... Total counts : 4952 6959 5698 5782 Total cts rejected: 4573 6606 5340 5455 Total cts rej (%) : 92.35 94.93 93.72 94.34 Number of clean counts accepted : 1417 writing history cards... copying extensions... writing out hot pixs... Number of rejected pixels : 281 updating NEVENTS keywords... closing data file... closing clean file...-> Extracting bright and dark Earth events from ad10012010s100202h.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 04:04:56 0.34E+04 100898 1111 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010s100202h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010s100202h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad10012010s100202h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT2 HIGH 16/04/93 04:04:56 0.34E+04 106612 1111 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010s100212h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010s100212h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 4095 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-SIS1-BRIGHT2 > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT2 > extract events !earthevents:ASCA-SIS1-BRIGHT2 > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT2 > exit save_session=no-> Deleting ad10012010s100212h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS S1CCDPOW 1 X0614+09 BRIGHT HIGH 16/04/93 05:31:08 0.26E+04 89100 1111 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010s100302h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010s100302h.unf Got new instrument: SIS1 Setting: IMAGE binning = 4 WMAP binning = 8 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 2047 Got the minimum time resolution of the read data: 16.000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-SIS1-BRIGHT > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-SIS1-BRIGHT > extract events !earthevents:ASCA-SIS1-BRIGHT > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-SIS1-BRIGHT > exit save_session=no-> Deleting ad10012010s100302h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 174958 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g200170h.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Deleting ad10012010g200170h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 174958 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200170h.unf Total Good Bad: Region Time Phase Cut 174958 649 0 174309 0 0 Writing events file 649 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 174958 649 0 174309 0 0 in 234.03 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g200170h.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Extracting bright and dark Earth events from ad10012010g200270m.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 136308 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.unf Total Good Bad: Region Time Phase Cut 136308 6378 0 129930 0 0 Writing events file 6378 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 136308 6378 0 129930 0 0 in 3440.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g200270m.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Extracting ad10012010g200270m.brt
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 136308 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g200270m.unf Total Good Bad: Region Time Phase Cut 136308 3023 0 133285 0 0 Writing events file 3023 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 136308 3023 0 133285 0 0 in 1119.96 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g200270m.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Extracting bright and dark Earth events from ad10012010g200370m.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.13E+03 1590 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g200370m.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Deleting ad10012010g200370m.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.13E+03 1590 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010g200370m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g200370m.unf Got new instrument: GIS2 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS2-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS2-PH > extract events !earthevents:ASCA-GIS2-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS2-PH > exit save_session=no-> Deleting ad10012010g200370m.brt since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 156908 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g300170h.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Deleting ad10012010g300170h.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH HIGH 16/04/93 04:05:06 0.60E+04 156908 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300170h.unf Total Good Bad: Region Time Phase Cut 156908 578 0 156330 0 0 Writing events file 578 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 156908 578 0 156330 0 0 in 234.03 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g300170h.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.62500E-01 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Extracting bright and dark Earth events from ad10012010g300270m.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 134921 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.unf Total Good Bad: Region Time Phase Cut 134921 5861 0 129060 0 0 Writing events file 5861 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 134921 5861 0 129060 0 0 in 3440.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g300270m.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Extracting ad10012010g300270m.brt
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 03:37:48 0.13E+05 134921 1024 EXTRACTOR vers 2.0 11 Apr 1997. Doing file: /data/data17/seq_proc/10012010.008/ad10012010g300270m.unf Total Good Bad: Region Time Phase Cut 134921 2771 0 132150 0 0 Writing events file 2771 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 134921 2771 0 132150 0 0 in 1119.96 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g300270m.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Extracting bright and dark Earth events from ad10012010g300370m.unf
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.13E+03 1593 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g300370m.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==1" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Deleting ad10012010g300370m.drk since it contains 0 events
** XSELECT V1.3 ** !> Enter session name >[xsel] earthevents Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY OBJECT DATAMODE BIT_RATE DATE-OBS TIME-OBS ONTIME NEVENTS PHA_BINS 1 X0614+09 PH MEDIUM 16/04/93 04:30:04 0.13E+03 1593 1024 EXTRACTOR vers 2.0 11 Apr 1997. Skipping file: /data/data17/seq_proc/10012010.008/ad10012010g300370m.unf Writing events file 0 events written to the output file =============================================================================== Grand Total Good Bad: Region Time Phase Cut 0 0 0 0 0 0 in 0.00 seconds Command not found; type ? for a command listing !earthevents:ASCA > set mission ASCA Notes: XSELECT set up for ASCA Keywords for time and pha are TIME PI Units of time are s Default timing binsize = 16.00 Keywords for images are DETX DETY Keywords for the WMAP are DETX DETY !earthevents:ASCA > set datadir . Setting data directory to /data/data17/seq_proc/10012010.008/ Setting mkf directory to /data/data17/seq_proc/10012010.008/ !earthevents:ASCA > read events ad10012010g300370m.unf Got new instrument: GIS3 Setting: IMAGE binning = 1 WMAP binning = 1 Energy Column = PI Energy rebinning = 1 Getting Min and Max for Energy Column... Got min and max for PI: 0 1023 Got the minimum time resolution of the read data: 0.50000 Number of files read in: 1 ******************** Observation Catalogue ******************** Data Directory is: /data/data17/seq_proc/10012010.008/ HK Directory is: /data/data17/seq_proc/10012010.008/ !earthevents:ASCA-GIS3-PH > select mkf "FOV==2" data_dir=. ASCA_mkf_def_expr=ft*.mkf !earthevents:ASCA-GIS3-PH > extract events !earthevents:ASCA-GIS3-PH > save events outfile=event.tmp use_events=no Wrote events list to file event.tmp !earthevents:ASCA-GIS3-PH > exit save_session=no-> Deleting ad10012010g300370m.brt since it contains 0 events
Offset of 1.500000000000000E+08 from 1/1/93 0:0:0 is date and time (including leapseconds) = 3/10/97 2:39:56.000000 Modified Julian Day = 50724.111064814816928
ad10012010s000202h.unf|ORIGMODE|FAINT|DATAMODE before any conversion ad10012010s000302h.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion-> listing ad10012010s000202h.unf
ad10012010s100202h.unf|ORIGMODE|FAINT|DATAMODE before any conversion ad10012010s100302h.unf|ORIGMODE|BRIGHT|DATAMODE before any conversion-> listing ad10012010s100202h.unf
ad10012010g200270m.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255) ad10012010g200370m.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255) ad10012010g200270m.unf|SP_B_P|0|Spread discri B for POW2 method (0-255) ad10012010g200370m.unf|SP_B_P|255|Spread discri B for POW2 method (0-255) ad10012010g200270m.unf|SP_C_P|0|Spread discri C for POW2 method (0-255) ad10012010g200370m.unf|SP_C_P|255|Spread discri C for POW2 method (0-255) ad10012010g200270m.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255) ad10012010g200370m.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255) ad10012010g200270m.unf|SP_A_U_F|240|Spread discri A_U for FLF method (0-255) ad10012010g200370m.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255) ad10012010g200270m.unf|SP_B_F|128|Spread discri B for FLF method (0-255) ad10012010g200370m.unf|SP_B_F|120|Spread discri B for FLF method (0-255) ad10012010g200270m.unf|SP_C_F|0|Spread discri C for FLF method (0-255) ad10012010g200370m.unf|SP_C_F|120|Spread discri C for FLF method (0-255) ad10012010g200270m.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023) ad10012010g200370m.unf|SP_PH_F|31098|Spread discri PH for FLF method (0-1023)-> listing ad10012010g200270m.unf
ad10012010g300270m.unf|SP_A_L_P|0|Spread discri A_L for POW2 method (0-255) ad10012010g300370m.unf|SP_A_L_P|255|Spread discri A_L for POW2 method (0-255) ad10012010g300270m.unf|SP_B_P|0|Spread discri B for POW2 method (0-255) ad10012010g300370m.unf|SP_B_P|255|Spread discri B for POW2 method (0-255) ad10012010g300270m.unf|SP_C_P|0|Spread discri C for POW2 method (0-255) ad10012010g300370m.unf|SP_C_P|255|Spread discri C for POW2 method (0-255) ad10012010g300270m.unf|SP_A_L_F|80|Spread discri A_L for FLF method (0-255) ad10012010g300370m.unf|SP_A_L_F|0|Spread discri A_L for FLF method (0-255) ad10012010g300270m.unf|SP_A_U_F|240|Spread discri A_U for FLF method (0-255) ad10012010g300370m.unf|SP_A_U_F|0|Spread discri A_U for FLF method (0-255) ad10012010g300270m.unf|SP_B_F|128|Spread discri B for FLF method (0-255) ad10012010g300370m.unf|SP_B_F|120|Spread discri B for FLF method (0-255) ad10012010g300270m.unf|SP_C_F|0|Spread discri C for FLF method (0-255) ad10012010g300370m.unf|SP_C_F|120|Spread discri C for FLF method (0-255) ad10012010g300270m.unf|SP_PH_F|0|Spread discri PH for FLF method (0-1023) ad10012010g300370m.unf|SP_PH_F|31353|Spread discri PH for FLF method (0-1023)-> listing ad10012010g300270m.unf
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Standard Output From FTOOL fchecksum:
Checksum keywords updated successfully.-> Doing inventory of all files