(Item
nid)
In
addition to the information required under
the general acceptance procedures, include
the following information in a request
for initial acceptance of network interface
devices (NIDs).
Product
Description
The
manufacturer should include detail regarding
the type of protection included and, if
of the gas tube variety, should include
the gas tube duty class for which the
product should be considered for acceptance,
i.e., light, medium, heavy or maximum
duty per RUS Bulletin345-83, "RUS
Specification for Gas Tube Surge Arresters
- PE-80."
Conformance
to Standards
Manufacturers
should certify compliance of its product
to a recognized Network Interface Device
standard such as, but not limited to,
the Telcordia Technologies GR-49, "Outdoor
Telephone Network Interface Devices."
In addition, the manufacturer should submit
certified information detailing conformance
to Paragraphs 3.1 and 3.2 of RUS Bulletin
345-39, "Specification for Telephone
Station Protectors - PEG-2," except
where PEG-1 and PEG-4 are referred to,
use RUS Bulletin 345-83, "RUS Specification
for Gas Tube Surge Arresters - PE-80"
and RUS Bulletin 345-78, "RUS Specification
for Carbon Arrester Assemblies for Use
in Protectors - PE-78," respectively.
All NIDs should obtain the acceptance
of a recognized testing laboratory as
required by the National Electrical Code.
Photocopies of the reports and letters
of approval of such laboratories should
be submitted with all requests for RUS
consideration.
Samples
The
manufacturer should submit one sample,
fully equipped with demarcation, protection
and cover for each network interface device
for which RUS acceptance is requested.
For
further information or clarification on
the above acceptance procedures, please
contact:
Norberto
Esteves
norberto.esteves@usda.gov
|