[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[IGSMAIL-201] Proposal to standardize receiver and antenna names in Rinex
- Subject: [IGSMAIL-201] Proposal to standardize receiver and antenna names in Rinex
- From: Ulf Lindqwister/JPL, Werner Gurtner/UB, Miranda Chin/NGS/NOAA
- Date: 22 Feb 1993 00:00:00
From: Ulf Lindqwister/JPL, Werner Gurtner/UB, Miranda Chin/NGS/NOAA
Subject: Proposal to standardize receiver and antenna names in Rinex
----------------------------------------------------------------------
The list below proposes a standardization of the receiver names and
antenna names. If adopted by the IGS community, then we suggest that
agencies producing Rinex files include the appropriate receiver and
antenna types in the Rinex file at the point of creation. Please let us
know your ideas and concerns about this proposal.
Regards,
- Ulf, Werner, and Miranda
Ulf Lindqwister/JPL
UJL @ LOGOS.JPL.NASA.GOV
Werner Gurtner/Univ. of Bern
GURTNER @ AIUB.UNIBE.CH
Miranda Chin/NGS/NOAA
MIRANDA @ GRACIE.GRDL.NOAA.GOV
Rogue
-----
Receiver type Description
ROGUE SNR-8 2 unit rack-mounted (big Rogue)
ROGUE SNR-800 1 unit rack-mounted (big Rogue)
ROGUE SNR-8A MiniRogue -- not CONAN compatible
ROGUE SNR-8C MiniRogue -- CONAN compatible
ROGUE SNR-8000 TurboRogue
Antenna type Description
DORNE MARGOLIN A Antenna with chokering for the Rogues
[Thickness of Chokering A: 0.0699 m]
DORNE MARGOLIN B Antenna with chokering for the TurboRogues
[Thickness of Chokering B: 0.1016 m]
Trimble
-------
Receiver Type Description
TRIMBLE 4000S 4000SL and 4000SX (single frequency)
TRIMBLE 4000SD 4000SLD (dual freq. L2 squaring)
TRIMBLE 4000ST 4000SST (dual freq. L1 c/a, L2 squaring or p-code)
TRIMBLE 4000SE 4000SSE (dual freq. p-code on L1 and L2)
Antenna Type Description
GEODETIC L1 To use with Single frequency geodetic receiver
GEODETIC L1/L2 " Dual "
KINEMATIC L1 antenna without a ground plane
KINEMATIC L1/L2 "
MiniMac
-------
Receiver Type Antenna Type Description
MINIMAC2816AT MACROMETER X-DIPOLE This system is used in CIGNET
MINIMAC2816 MINIMAC PATCH A field unit
Ashtech
------
Receiver Type Description
MD-XII Dual freq. L1 c/a and L2 squaring
P-XII Dual freq. p-code on both L1 and L2
Antenna Type Description
GEODETIC L1/L2 Dual freq. with a ground plane
MARINE/RANGE Single freq. with a smaller ground plane
A-C L1 Single freq. without a ground plane for aircraft use
A-C L1/L2 Dual freq. without a ground plane for aircraft use