; This file contains the CDS CRUISE PHASE TIME-LINE
;
;	Compiled by R.A. Harrison in discussion with
;	E.C. Sawyer, B.J. Kent, D.J. Parker, J. Payne,
;	C.D. Pike and S.J. Peskett - July 1994.
; 
;	Updated: R.A. Harrison - November 1994.
;	Minor updates: R.A. Harrison - January 1995.
;
; Time-line has the required format: TIME # ACTION # COMMENT
; Time has the format: ddd & hh:mm:ss, or ddd, or ddd & hh, or ddd & hh:mm
;	************ ASSUMES GODDARD TIME *****************
; 
; The purpose of this is to make the file machine readable for input to
; the SOHO timeline IDL program
; 
; Blank lines and comment lines -- preceeded by ";" -- are ignored
;     0	& 00:00	# Launch of SOHO	#
;     4 & 00:00	# Science Data Acquisition Possible #
      4 & 06:00 # Initial CDS Switch On #CDS To Standby/Eng Data Onset
;    20 & 00:00	# 2nd Mid Course Correction #	 
     23 & 08:00 # Initial Commissioning Test #
;		Includes basic mode tests, table loads/dumps, voltage checks,
;		heater and filament checks - NO HIGH VOLTAGES. DOORS SHUT.
     40 & 00:00	# CDS In Flight System Functional Tests	# DOORS SHUT
;		Includes modified SFTs - MCU, EPS, GIS, VDS, CDHS
     46 & 00:00 # Pre-Sunlight Commissioning Activity # with high voltages
;		Includes mode checks with high voltages, GI initial detector
;		calibration with filaments, detector scrubbing if required,
;		flag checks
     51 & 08:00 # Open Door Sequence/Start Thermal Control # Fully Outgassed
;		Procedure - 1. Detector HV on with doors shut, 2. Off,
;			3. Open Door, Wait for 0.5 day to outgas
;			4. Independent Thermal Control Starts
;			08:00 timed for GSFC operational day.
     52	& 12:00	# CDS In Flight System Function Tests	# DOORS OPEN
;    56 & 08:00	# Start test sequences # Blue book, Version 5, p. 73-84
     56	& 08:00	# TEST1 - GI Switch on Study #GI detector cal and 1st spectrum
     57	& 08:00 # TEST2 - NI Switch on Study # 1st NI spectrum
     58	& 08:00	# Thermal Check Out	#
     62 & 08:00	# SPECT - GI Spectral Atlas #
;		First Scientific Study and Start of Synoptic, Calibration
;		Monitoring Programme
     63	& 08:00	# TEST3 - Course pointing calibration #
     64	& 08:00	# SPECT - GI Spectral Atlas #
;		SPECT (and NISAT) to be run on a variety of targets to
;		establish intensity ranges etc...
;		***** Also, GIS dumps should be taken during this period
;		for the different targets to firmly establish spiral fits
;		prior to day 80.******
     65 & 08:00 # TEST4 - Fine pointing calibration #
     66 & 08:00 # SPECT - GI Spectral Atlas #
     67 & 08:00	# TEST5 - GI test study #
     68	& 08:00	# SPECT - GI Spectral Atlas #
     69	& 08:00	# TEST6 - NI test study 1 #
     70	& 08:00 # SPECT - GI Spectral Atlas #
     71	& 08:00	# TEST7 - NI test study 2 #
     72	& 08:00	# NISAT - NI Spectral Atlas #
     73	& 08:00	# SYNOP - Synoptic Scan #
     74	& 08:00	# SPECT - GI Spectral Atlas #
     75 & 20:00 # Close doors # Before wheel off-load maneuver
;    76 & 00:00 # S/C Wheel Offload # 
     77 & 08:00 # Open doors #
;    77 & 12:00 # continue test sequences #
     77	& 12:00	# NISAT - NI Spectral Atlas #
     78	& 08:00	# SPECT - GI Spectral Atlas #
     79	& 08:00	# SYNOP - Synoptic Scan #
     80 & 00:00	# START OF CDS SCIENCE OPERATIONS	#
; 
    114 & 20:00 # Close doors # Prior to Halo Orbit Insertion
;   115	& 00:00	#S/C Halo Insertion Man. # 
    120 & 06:00 # Open doors # After HOI
    120 & 08:00 # Continue Science Operations #
; End of file