From david.price at eurostep.com  Thu Sep  8 14:46:03 2005
From: david.price at eurostep.com (David Price)
Date: Thu Sep  8 14:46:10 2005
Subject: [step-os] jEdit and EXPRESS
Message-ID: <000001c5b4a5$908a8d90$2101a8c0@ESUKPC20>

All,

I've been using the jEdit (http://www.jedit.org/) tool quite a lot lately
and so wrote up a quick EXPRESS mode for it. Basically it just highlighs
keywords and reserved works. 

I also wrote up a small jEdit Console/Commando file to validate the EXPRESS
using eep (eurostep eXPRESS parser). Both jEdit extensions are available on
SourceForge under the exff project as examples.

http://cvs.sourceforge.net/viewcvs.py/exff/exff/examples/

Cheers,
David

Phone +44 207 221 7307
Mobile +44 7788 561308 

From david.price at eurostep.com  Fri Sep  9 07:26:27 2005
From: david.price at eurostep.com (David Price)
Date: Fri Sep  9 07:26:31 2005
Subject: [step-os] RE: jEdit and EXPRESS
Message-ID: <001a01c5b531$516b2b10$2101a8c0@ESUKPC20>

I heard thru the grapevine that Mike Loeffler had done something similar.
Harry Frisch sent it to me so I'll merge the improvements/additions from
what Mike did and reload SourceForge exff.

Cheers,
David

-----Original Message-----
From: David Price [mailto:david.price@eurostep.com] 
Sent: 08 September 2005 19:46
To: STEP Open-Source
Subject: jEdit and EXPRESS


All,

I've been using the jEdit (http://www.jedit.org/) tool quite a lot lately
and so wrote up a quick EXPRESS mode for it. Basically it just highlighs
keywords and reserved works. 

I also wrote up a small jEdit Console/Commando file to validate the EXPRESS
using eep (eurostep eXPRESS parser). Both jEdit extensions are available on
SourceForge under the exff project as examples.

http://cvs.sourceforge.net/viewcvs.py/exff/exff/examples/

Cheers,
David

Phone +44 207 221 7307
Mobile +44 7788 561308