! Started logfile: J2101+0341_S_2006_02_23_yyk_uvs.log on Wed Jul 5 13:48:25 2006 obs J2101+0341_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J2101+0341_S_2006_02_23_yyk_uva.fits ! AN table 1: 137 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.953447 visibilities/baseline/integration-bin. ! Found source: J2101+0341 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 23512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J2101+0341_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.501325 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=6.442 mas, bpa=-4.885 degrees ! Estimated noise=2.18735 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.383619 Jy ! Component: 100 - total flux cleaned = 0.462247 Jy ! Total flux subtracted in 100 components = 0.462247 Jy ! Clean residual min=-0.020453 max=0.028879 Jy/beam ! Clean residual mean=-0.000057 rms=0.006357 Jy/beam ! Combined flux in latest and established models = 0.462247 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.462247 Jy ! ! Correcting IF 1. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.168535Jy sigma=1.826433 ! Fit after self-cal, rms=0.168347Jy sigma=1.820932 ! Inverting map and beam ! Estimated beam: bmin=2.759 mas, bmaj=6.442 mas, bpa=-4.885 degrees ! Estimated noise=2.18735 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=7.433 mas, bpa=-5.734 degrees ! Estimated noise=1.64106 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.034615 Jy ! Component: 100 - total flux cleaned = 0.0525548 Jy ! Component: 150 - total flux cleaned = 0.0598974 Jy ! Component: 200 - total flux cleaned = 0.0617731 Jy ! Total flux subtracted in 200 components = 0.0617731 Jy ! Clean residual min=-0.015668 max=0.019732 Jy/beam ! Clean residual mean=-0.000300 rms=0.005281 Jy/beam ! Combined flux in latest and established models = 0.52402 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 19 model components to the UV plane model. ! The established model now contains 36 components and 0.52402 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161564Jy sigma=1.687265 ! Fit after self-cal, rms=0.161482Jy sigma=1.687028 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.267 x 7.433 at -5.734 degrees (North through East) ! Clean map min=-0.014936 max=0.43092 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 1.02128 ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.89 HN 0.93 KP 0.95 ! LA 1.21 MK 0.99 NL 0.95 OV 0.97 ! PT 1.02 SC 0.90 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 1.00857 ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 1.02 KP 0.96 ! LA 1.20 MK 1.01 NL 0.94 OV 0.99 ! PT 1.00 SC 0.90 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.956583 ! Telescope amplitude corrections in sub-array 1: ! BR 1.48 FD 0.94 HN 0.97 KP 0.95 ! LA 0.94 MK 1.12 NL 1.03 OV 1.01 ! PT 1.05 SC 0.96 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.06073 ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.94 HN 0.98 KP 0.89 ! LA 0.78 MK 1.12 NL 0.95 OV 0.85 ! PT 0.91 SC 1.04 ! ! ! Fit before self-cal, rms=0.161482Jy sigma=1.687028 ! Fit after self-cal, rms=0.142931Jy sigma=1.277033 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142931Jy sigma=1.277033 ! Fit after self-cal, rms=0.142926Jy sigma=1.276955 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.33 mas, bmaj=7.671 mas, bpa=-4.257 degrees ! Estimated noise=1.66914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315033 Jy ! Component: 100 - total flux cleaned = 0.00227019 Jy ! Component: 150 - total flux cleaned = 0.00155944 Jy ! Component: 200 - total flux cleaned = 0.000973127 Jy ! Total flux subtracted in 200 components = 0.000973127 Jy ! Clean residual min=-0.006573 max=0.005887 Jy/beam ! Clean residual mean=0.000069 rms=0.001917 Jy/beam ! Combined flux in latest and established models = 0.524993 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 20 model components to the UV plane model. ! The established model now contains 52 components and 0.524993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142114Jy sigma=1.263038 ! Fit after self-cal, rms=0.142054Jy sigma=1.262898 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142054Jy sigma=1.262898 ! Fit after self-cal, rms=0.138103Jy sigma=1.215426 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 6.39748e-05 Jy ! Component: 100 - total flux cleaned = -0.000368973 Jy ! Component: 150 - total flux cleaned = -0.000657842 Jy ! Component: 200 - total flux cleaned = -0.0010129 Jy ! Total flux subtracted in 200 components = -0.0010129 Jy ! Clean residual min=-0.006388 max=0.005915 Jy/beam ! Clean residual mean=0.000074 rms=0.001865 Jy/beam ! Combined flux in latest and established models = 0.52398 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 14 model components to the UV plane model. ! The established model now contains 60 components and 0.52398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137893Jy sigma=1.212293 ! Fit after self-cal, rms=0.137396Jy sigma=1.203357 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.33 x 7.671 at -4.257 degrees (North through East) ! Clean map min=-0.0061368 max=0.44649 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137396Jy sigma=1.203357 ! Fit after self-cal, rms=0.131763Jy sigma=1.063326 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131763Jy sigma=1.063326 ! Fit after self-cal, rms=0.131902Jy sigma=1.061045 ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=7.72 mas, bpa=-4.557 degrees ! Estimated noise=1.66526 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00265378 Jy ! Component: 100 - total flux cleaned = -0.00297366 Jy ! Component: 150 - total flux cleaned = -0.00323137 Jy ! Component: 200 - total flux cleaned = -0.00352327 Jy ! Total flux subtracted in 200 components = -0.00352327 Jy ! Clean residual min=-0.006617 max=0.005610 Jy/beam ! Clean residual mean=0.000042 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 0.520457 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.520457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131706Jy sigma=1.057119 ! Fit after self-cal, rms=0.131878Jy sigma=1.056351 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131878Jy sigma=1.056351 ! Fit after self-cal, rms=0.131431Jy sigma=1.044939 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131431Jy sigma=1.044939 ! Fit after self-cal, rms=0.131545Jy sigma=1.044756 ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.755 mas, bpa=-4.848 degrees ! Estimated noise=1.66661 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123483 Jy ! Component: 100 - total flux cleaned = -0.00139521 Jy ! Component: 150 - total flux cleaned = -0.00159495 Jy ! Component: 200 - total flux cleaned = -0.00171206 Jy ! Total flux subtracted in 200 components = -0.00171206 Jy ! Clean residual min=-0.006687 max=0.005461 Jy/beam ! Clean residual mean=0.000040 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 0.518745 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.518745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131409Jy sigma=1.042639 ! Fit after self-cal, rms=0.131485Jy sigma=1.042524 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.729 mas, bmaj=12.01 mas, bpa=9.825 degrees ! Estimated noise=2.07381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564095 Jy ! Component: 100 - total flux cleaned = 0.0007707 Jy ! Component: 150 - total flux cleaned = 0.000860502 Jy ! Component: 200 - total flux cleaned = 0.000939962 Jy ! Total flux subtracted in 200 components = 0.000939962 Jy ! Clean residual min=-0.006409 max=0.004847 Jy/beam ! Clean residual mean=0.000071 rms=0.001964 Jy/beam ! Combined flux in latest and established models = 0.519685 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 9 model components to the UV plane model. ! The established model now contains 73 components and 0.519685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131428Jy sigma=1.042570 ! Fit after self-cal, rms=0.131496Jy sigma=1.042491 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.786 mas, bmaj=6.568 mas, bpa=-4.213 degrees ! Estimated noise=2.20121 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.385102 Jy ! Component: 100 - total flux cleaned = 0.457296 Jy ! Component: 150 - total flux cleaned = 0.483004 Jy ! Component: 200 - total flux cleaned = 0.49654 Jy ! Total flux subtracted in 200 components = 0.49654 Jy ! Clean residual min=-0.007951 max=0.009692 Jy/beam ! Clean residual mean=0.000020 rms=0.002306 Jy/beam ! Combined flux in latest and established models = 0.49654 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.49654 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.755 mas, bpa=-4.848 degrees ! Estimated noise=1.66661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106753 Jy ! Component: 100 - total flux cleaned = 0.0159436 Jy ! Component: 150 - total flux cleaned = 0.0185707 Jy ! Component: 200 - total flux cleaned = 0.0190981 Jy ! Total flux subtracted in 200 components = 0.0190981 Jy ! Clean residual min=-0.006765 max=0.005786 Jy/beam ! Clean residual mean=0.000054 rms=0.001717 Jy/beam ! Combined flux in latest and established models = 0.515638 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 49 components and 0.515638 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.729 mas, bmaj=12.01 mas, bpa=9.825 degrees ! Estimated noise=2.07381 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195932 Jy ! Component: 100 - total flux cleaned = 0.00240343 Jy ! Component: 150 - total flux cleaned = 0.00268832 Jy ! Component: 200 - total flux cleaned = 0.00288254 Jy ! Total flux subtracted in 200 components = 0.00288254 Jy ! Clean residual min=-0.006440 max=0.004974 Jy/beam ! Clean residual mean=0.000083 rms=0.002006 Jy/beam ! Combined flux in latest and established models = 0.518521 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.518521 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.755 mas, bpa=-4.848 degrees ! Estimated noise=1.66661 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000249702 Jy ! Component: 100 - total flux cleaned = -0.000436763 Jy ! Component: 150 - total flux cleaned = -0.000594327 Jy ! Component: 200 - total flux cleaned = -0.000696706 Jy ! Total flux subtracted in 200 components = -0.000696706 Jy ! Clean residual min=-0.006797 max=0.005485 Jy/beam ! Clean residual mean=0.000046 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 0.517824 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 15 model components to the UV plane model. ! The established model now contains 69 components and 0.517824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131569Jy sigma=1.045261 ! Fit after self-cal, rms=0.131600Jy sigma=1.045064 wmodel J2101+0341_S_2006_02_23_yyk\_map.mod ! Writing 69 model components to file: J2101+0341_S_2006_02_23_yyk_map.mod wobs J2101+0341_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J2101+0341_S_2006_02_23_yyk_uvs.fits wwins J2101+0341_S_2006_02_23_yyk\_map.win ! wwins: Wrote 1 windows to J2101+0341_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00210799 Jy ! Component: 100 - total flux cleaned = -0.00289713 Jy ! Component: 150 - total flux cleaned = -0.0027173 Jy ! Component: 200 - total flux cleaned = -0.00236805 Jy ! Component: 250 - total flux cleaned = -0.00228328 Jy ! Component: 300 - total flux cleaned = -0.00173084 Jy ! Component: 350 - total flux cleaned = -0.00120578 Jy ! Component: 400 - total flux cleaned = -0.000631062 Jy ! Component: 450 - total flux cleaned = -7.97721e-05 Jy ! Component: 500 - total flux cleaned = 0.000517038 Jy ! Component: 550 - total flux cleaned = 0.000904195 Jy ! Component: 600 - total flux cleaned = 0.00133974 Jy ! Component: 650 - total flux cleaned = 0.00164158 Jy ! Component: 700 - total flux cleaned = 0.00216863 Jy ! Component: 750 - total flux cleaned = 0.00262595 Jy ! Component: 800 - total flux cleaned = 0.00295886 Jy ! Component: 850 - total flux cleaned = 0.00317505 Jy ! Component: 900 - total flux cleaned = 0.00343863 Jy ! Component: 950 - total flux cleaned = 0.00354006 Jy ! Component: 1000 - total flux cleaned = 0.00364001 Jy ! Component: 1050 - total flux cleaned = 0.00373832 Jy ! Component: 1100 - total flux cleaned = 0.00383379 Jy ! Component: 1150 - total flux cleaned = 0.00397363 Jy ! Component: 1200 - total flux cleaned = 0.00401846 Jy ! Component: 1250 - total flux cleaned = 0.00406309 Jy ! Component: 1300 - total flux cleaned = 0.00392988 Jy ! Component: 1350 - total flux cleaned = 0.00384477 Jy ! Component: 1400 - total flux cleaned = 0.00388775 Jy ! Component: 1450 - total flux cleaned = 0.00384679 Jy ! Component: 1500 - total flux cleaned = 0.00388826 Jy ! Component: 1550 - total flux cleaned = 0.00388855 Jy ! Component: 1600 - total flux cleaned = 0.00385027 Jy ! Component: 1650 - total flux cleaned = 0.0038889 Jy ! Component: 1700 - total flux cleaned = 0.0036977 Jy ! Component: 1750 - total flux cleaned = 0.00362186 Jy ! Component: 1800 - total flux cleaned = 0.00336335 Jy ! Component: 1850 - total flux cleaned = 0.00332762 Jy ! Component: 1900 - total flux cleaned = 0.00321996 Jy ! Component: 1950 - total flux cleaned = 0.00293694 Jy ! Component: 2000 - total flux cleaned = 0.00290278 Jy ! Total flux subtracted in 2048 components = 0.00283408 Jy ! Clean residual min=-0.002739 max=0.001930 Jy/beam ! Clean residual mean=0.000015 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.520658 Jy keep ! Adding 123 model components to the UV plane model. ! The established model now contains 192 components and 0.520658 Jy ![Exited script file: muppet] wmap "J2101+0341_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.755 at -4.848 degrees (North through East) ! Clean map min=-0.005255 max=0.44985 Jy/beam ! Writing clean map to FITS file: J2101+0341_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.44985 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000670917 device "J2101+0341_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J2101+0341_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.447427 0.447427 0.894854 1.78971 3.57942 7.15883 14.3177 28.6353 57.2707 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.449 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.755 at -4.848 degrees (North through East) ! Clean map min=-0.005255 max=0.44985 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J2101+0341_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J2101+0341_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J2101+0341_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 13:49:01 2006