icon, and then clicking OK on the
product Values Dialog. 2) Put the following into the file (replacing everything that
is there).
from gfeConfig import *
ProcessMonitorMaxLines = 20
ProcessMonitorMaxOldTasks = 3
ProcessMonitorMaxTasks = 2
3) Use Save on the Python editor. Result: The configuration file is
saved.
5) Select Products->Formatter Launcher to bring up the Formatter Launcher
Dialog. Choose Products->Baseline_ZFP. Result:
A new tab appears in the Formatter Launcher Dialog containing the ZFP
zone combiner.
6) From the Formatter Launcher, choose
Products->Baseline_FWF. Result: A new tab appears in the
Formatter Launcher Dialog containing the FWF zone combiner.
7) From the Formatter Launcher, choose
Products->Baseline_FWFTable. Result: A new tab appears in the
Formatter Launcher Dialog containing the FWF Table zone combiner.
8) Bring up the Process Monitor Dialog through the GFE main menu
Products->Process Monitor. Result: The Process Monitor dialog
is displayed.
9) Do this step quickly, so we get several processes queued and/or
running. On the Formatter Launcher, cycle through each tab by clicking
on the tab, clicking the
Run icon, and then clicking OK on the
product Values Dialog.
10) The Process Monitor Dialog shows two processes running at the
same time. The blinking "Green" square indicates that the process
is
running. Result: Verified.
11) When the processses have finished, click the Terminal Window 
on the Process Monitor for each of
the tasks. Note the number of lines that exist in each
window. Result: A maximum of 20 lines exist.
12) From the Formatter Launcher, click the Run icon for one of the
products. Click OK on the product dialog window that
appears. Examine the Process Monitor Dialog. Result:
One of the older tasks is no longer shown in the Process Monitor Dialog
since the limit was set to 3 old tasks.
13) Shut down the GFE from the GFE->Exit GFE menu and restart it
using the gfeConfig configuration file.
15) From the Formatter Launcher, choose
Products->Baseline_FWF.
Result: A new tab appears in the Formatter Launcher Dialog containing
the FWF zone combiner.
16) From the Formatter Launcher, choose
Products->Baseline_FWFTable. Result: A new tab appears in the
Formatter Launcher Dialog containing the FWF Table zone combiner.
17) Bring up the Process Monitor Dialog through the GFE main menu
Products->Process Monitor. Result: The Process Monitor dialog
is
displayed.
18) On the Formatter Launcher, cycle through each tab by clicking on
the tab, clicking the
Run icon, and then clicking OK on the
product Values Dialog.
19) The Process Monitor Dialog shows only one process running. The blinking "Green" square indicates that a process is running. Result: Verified.
20) When the processses have finished, click the Terminal Window
on the Process Monitor for each of the tasks. Note the number of
lines
that exist in each window. Result: A huge number of lines
can be shown (from start to finish of the product). Default size
is 2000 lines.
icon for one of the products. Click OK on the product dialog
window
that appears. Examine the Process Monitor Dialog. Result:
Default is 10 old tasks can be displayed, thus there is plenty of room
for the new task along with the three previous tasks.