[Federal Register: January 23, 2008 (Volume 73, Number 15)] [Notices] [Page 3958-3964] From the Federal Register Online via GPO Access [wais.access.gpo.gov] [DOCID:fr23ja08-42] ----------------------------------------------------------------------- ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OPPT-2007-1193; FRL-8348-9] Certain New Chemicals; Receipt and Status Information AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. ----------------------------------------------------------------------- SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 2, 2007 through November 30, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. DATES: Comments identified by the specific PMN number or TME number, must be received on or before February 22, 2008. ADDRESSES: Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2007-1193, by one of the following methods:Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments. Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. Hand Delivery: OPPT Document Control Office (DCO), EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number EPA-HQ-OPPT-2007-1193. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information. Instructions: Direct your comments to docket ID number EPA-HQ-OPPT- 2007-1193. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e- mail. The regulations.gov website is an ``anonymous access'' system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e- mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses. For additional information about EPA's public docket, visit the EPA Docket Center homepage at http://www.epa.gov/epahome/dockets.htm. Docket: All documents in the docket are listed in the docket index available in regulations.gov. To access the electronic docket, go to http://www.regulations.gov, select ``Advanced Search,'' then ``Docket Search.'' Insert the docket ID number where indicated and select the ``Submit'' button. Follow the instructions on the regulations.gov website to view the docket index or access available documents. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov , or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding Federal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is (202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure. FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov. SUPPLEMENTARY INFORMATION: I. General Information A. Does this Action Apply to Me? This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT. [[Page 3959]] B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When submitting comments, remember to: i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number). ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number. iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes. iv. Describe any assumptions and provide any technical information and/or data that you used. v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced. vi. Provide specific examples to illustrate your concerns and suggest alternatives. vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats. viii. Make sure to submit your comments by the comment period deadline identified. II. Why is EPA Taking this Action? Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 2, 2007 through November 30, 2007, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. III. Receipt and Status Report for PMNs This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available. In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity. I. 111 Premanufacture Notices Received From: 10/01/07 to 11/30/07 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- P-08-0001 10/01/07 12/29/07 CBI (G) Esterified (G) Esterified polyamic acid polyamic acid polymer for polymer coatings, open, non- dispersive use P-08-0002 10/01/07 12/29/07 Genencor, (Danisco, (S) Textile chemical (S) Benzonitrile, 4- USA) formulation (TCF) of hydroxy-3,5- denim bleaching dimethoxy- products; laundry (syringonitrile) denim bleaching and/ or modification of the cast of denim P-08-0003 10/01/07 12/29/07 CBI (S) Intermediate for (G) Methacrylate paint binder monomer P-08-0004 10/01/07 12/29/07 CBI (S) Topcoat for (G) Aliphatic leather; topcoat for polycarbonate diol plastics and epdn polyurethane rubber P-08-0005 10/01/07 12/29/07 CBI (S) Topcoat for (G) Aliphatic leather; topcoat for polycarbonate diol plastics and epon polyurethane rubber P-08-0006 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polyester coatings microgel polymer P-08-0007 10/03/07 12/31/07 CBI (G) Resin for (G) Polyester polymer coatings P-08-0008 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer coatings P-08-0009 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer coatings P-08-0010 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer coatings P-08-0011 10/04/07 01/01/08 CBI (S) Paint binder (G) Octyl acrylates (whichever of the two PMN substance is produced will be used as a paint binder) P-08-0012 10/04/07 01/01/08 CBI (S) Paint binder (G) Octyl acrylates (whichever of the two PMN substance is produced will be used as a paint binder) P-08-0013 10/03/07 12/31/07 Incorez Corporation (S) Curing agent for (G) Emulsified epoxy based coatings polyamine hardener P-08-0014 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer coatings P-08-0015 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer coatings P-08-0016 10/09/07 01/06/08 CBI (S) Chemical (G) Hydroxymercapto Intermediate substituted benzene [[Page 3960]] P-08-0017 10/09/07 01/06/08 The Dow Chemical (G) Component of (G) Phosphorated Company electrical laminates phenolic novolac P-08-0018 10/10/07 01/07/08 CBI (G) Oilfield (G) Modified olefins applications P-08-0019 10/10/07 01/07/08 CBI (G) Component of (G) Benzene, 1,4- manufactured bis(aralkoxy)- consumer article - contained use P-08-0020 10/10/07 01/07/08 CBI (G) Chemical (S) Propanol, 1 (or intermediate in the 2)-(methyl-2- manufacture of other phenoxyethoxy)- industrial chemicals, and additive in formulated coating products P-08-0021 10/11/07 01/08/08 Robertet, Inc. (S) As an odoriferous (S) Alcoholic component of beverages, rum, ext. fragrance compounds P-08-0022 10/11/07 01/08/08 Mitsubishi Chemical (S) Molding material (G) Alkanedioic acid, Performance for agriculture; polymer with Polymers, Inc. molding material for butanedioic acid, food package; 1,4-butanediol and 2- material for fiber, hydroxypropanoic monofilament; acid molding material for construction; material for sheet, film P-08-0023 10/11/07 01/08/08 Mitsubishi Chemical (S) Molding material (G) Alkanedioic acid, Performance for agriculture; polymer with 1,4- Polymers, Inc. molding material for butanediol and 2- food package; hydroxypropanoic material for fiber, acid monofilament; molding material for construction; material for sheet, film P-08-0024 10/10/07 01/07/08 CBI (G) Crosslinking (S) 1,3-dioxolane-4- agent to be butanol,2-ethenyl- ultimately used in the manufacture of automotive and aircraft coating materials P-08-0025 10/12/07 01/09/08 CBI (G) Papermaking (S) Formamide, N- chemical ethenyl-, homopolymer, hydrolyzed, N-(3- carboxy-1-oxopropyl) N-[2-hydroxy-3- (trimethylammonio)pr opyl] derivs., chlorides P-08-0026 10/15/07 01/12/08 CBI (S) Melt processing (S) Methanone, 1,1'- e.g. injection (1,4-phenylene)bis[1- moulding to produce (4-fluorophenyl)-, finished articles polymer with bis(4- hydroxyphenyl)methan one P-08-0027 10/15/07 01/12/08 CBI (G) Silicone (G) Dimethyl siloxane intermediate polyglycol P-08-0028 10/15/07 01/12/08 CBI (S) Textile treating (G) Dimethyl siloxane agent polyethylene glycol P-08-0029 10/17/07 01/14/08 CBI (G) Destructive use (G) Hindered phenolic ester P-08-0030 10/18/07 01/15/08 CBI (G) A. Synthetic (G) 1,1 Geminal lubricant base fluid disubstituted (major); B. Reactive ethylene intermediate (minor) P-08-0031 10/18/07 01/15/08 CBI (G) A. Synthetic (G) 1,1 Geminal lubricant base fluid disubstituted (major); B. Reactive ethylene intermediate (minor) P-08-0032 10/18/07 01/15/08 CBI (G) A. Synthetic (G) 1,1 Geminal lubricant base fluid disubstituted (major); B. Reactive ethylene intermediate (minor) P-08-0033 10/19/07 01/16/08 CBI (G) Chemical (G) Chloro fluoro intermediate alkane P-08-0034 10/22/07 01/19/08 Hydbrid Plastics, (S) Epoxy resin for (S) Oxirane, 2-[[3- Inc. high temperature (trimethoxysilyl)pro aerospace composites poxy]methyl]-, hydrolyzed P-08-0035 10/19/07 01/16/08 CBI (G) Fabric treatment (S) 6H- agent dibenz[c,e][1,2]oxap hosphorium,6- (phenylmethyl)-,6- oxide P-08-0036 10/23/07 01/20/08 Fujifilm Hunt (S) Intermediated for (S) Chemicals U.S.A., production of PMN Benzenecarboximidami Inc. substance P-06-444 de, n-hydroxy-4- nitro- P-08-0037 10/24/07 01/21/08 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate polyurethane functional polyester adhesive polyether urethane polymer P-08-0038 10/25/07 01/22/08 CBI (S) Aliphatic (G) Tertiary amine acrylate polymer acrylate used in the manufacture of Ultraviolet curable inks and coatings P-08-0039 10/25/07 01/22/08 CBI (G) Hardening agent (G) Mixed amino diaryl sulfone isomers P-08-0040 10/25/07 01/22/08 CBI (G) Sealant (G) Polyurethane hybrid [[Page 3961]] P-08-0041 10/25/07 01/22/08 CBI (G) Paint (G) Neodecanoic acid, oxiranyl ester modified alkyl acrylate,polymer with alkyl acrylates, styrene and hydroxyalkyl acrylates, peroxide- initiated P-08-0042 10/23/07 01/20/08 CBI (G) Foam additive (G) Treated silica P-08-0043 10/26/07 01/23/08 CBI (G) Jacketing of (G) Fluoropolymer wires and data- cables P-08-0044 10/26/07 01/23/08 CBI (G) Non-dispersive (G) Animated epoxy use resin P-08-0045 10/29/07 01/26/08 Rahn USA Corp. (S) Ultra violet / (G) Aliphatic electron beam urethane acrylate reactive oligomer formulations P-08-0046 10/29/07 01/26/08 CBI (G) Coating additive (G) Mixed metal oxide complex P-08-0047 10/29/07 01/26/08 CBI (G) Raw material (G) Metal oxide complex P-08-0048 10/31/07 01/28/08 CBI (G) Colourant (G) Acrylic polymer dispersant P-08-0049 10/30/07 01/27/08 CBI (G) Ink additive (G) 2-propenoic acid, 2-methyl-, polymer with alkyl 2- propenoate, ethenylbenzene and 2- propenoic acid, metal salt, peroxycompound- initiated P-08-0050 10/31/07 01/28/08 CBI (G) Metalworking (G) Amide polymer fluid component P-08-0051 10/31/07 01/28/08 3M Company (G) Adhesive (G) Substituted acrylate polymer P-08-0052 11/01/07 01/29/08 BAE Systems , (G) For use as a high (S) Nitrotriazolone 3- ordnance systems explosive in nitro-1,2,4-triazol- Inc. explosives 5-one formulatons for DOD P-08-0053 11/01/07 01/29/08 Reichhold, Inc. (S) Topcoats for (G) Urethane modified industrial equipment vegetable oil, epoxidized polymer P-08-0054 11/01/07 01/29/08 CBI (G) Semiconductor (G) Poly (arylene coating ether) P-08-0055 11/01/07 01/29/08 CBI (G) Open non- (G) Aqueous hydroxyl- dispersive functional polyester (coatings) polyacrylate dispersion P-08-0056 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins; paos P-08-0057 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins; paos P-08-0058 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins; paos P-08-0059 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins; paos P-08-0060 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins; paos P-08-0061 10/31/07 01/28/08 CBI (G) Reactive (G) Alcohol, reaction emulsifier for products with emulsion alkylene oxide, polymerization alkenyl glycidyl ether sulfate P-08-0062 11/01/07 01/29/08 Reichhold, Inc. (S) Topcoats for (G) Urethane modified industrial equipment vegetable oil, epoxidized polymer P-08-0063 11/01/07 01/29/08 CBI (S) Extrusion of (G) Polyamide based tubing systems; on alkanedioic acid, injection molding of alkyl lactam and special applications polyoxyalkylene P-08-0064 11/02/07 01/30/08 CBI (G) An open non- (G) Rosin modified dispersive use phenolic resin P-08-0065 11/01/07 01/29/08 CBI (G) Rheology additive (G) Urethane-urea P-08-0066 11/01/07 01/29/08 CBI (G) Rheology additive (G) Urethane-urea P-08-0067 11/05/07 02/02/08 CIBA Corporation (S) Pigment for (G) 1',1'''-[1,4- printing ink used in phenylenebis(methyle time-temperature ne)]bis[1',3'- indicator labeling dihydro-8-methoxy- 3'3,'-dimethyl-6- nitro- aromatic substituted indole P-08-0068 11/05/07 02/02/08 Firmenich Inc. (S) Aroma for use in (S) Definition: fragrance mixtures, Extractives and which in turn are their physically used in perfumes, modified soaps, cleansers, derivatives. Schinus etc. Terebinthifolius. P-08-0068 11/05/07 02/02/08 Firmenich Inc. (S) Aroma for use in (S) Oils, schinus fragrance mixtures, terebinthifolius which in turn are used in perfumes, soaps, cleansers, etc. P-08-0069 11/05/07 02/02/08 CBI (G) Fuel additive- (G) Alkenyl destructive use succinimide P-08-0070 11/05/07 02/02/08 CBI (G) Coating (G) Fluorosilicone P-08-0071 11/05/07 02/02/08 CBI (G) Coating (G) Fluorosilicone P-08-0072 11/05/07 02/02/08 CBI (G) Thickener for (G) Poly inorganic materials (methacryloyloxyalky l trialkylammonium salt) P-08-0073 11/06/07 02/03/08 CBI (S) Crosslinker for (G) Aliphatic coatings and polyisocyanate, C16- adhesives alcohol and polyalkylene glycol- blocked P-08-0074 11/06/07 02/03/08 CBI (S) Crosslinker for (G) Aliphatic coatings and polyisocyanate, C16- adhesives alcohol and polyalkylene glycol- blocked P-08-0075 11/06/07 02/03/08 CBI (G) Paint (G) Polyisocyanate resin P-08-0076 11/07/07 02/04/08 CBI (G) For application (G) Disubstituted to cellulosic phenylazo substrates naphthalenstrisulfon ic acid, salt [[Page 3962]] P-08-0077 11/13/07 02/10/08 Orient Corporation of (S) Charge stabilizer (S) Ferrate(1-), America for electro-photo bis[4-[2-[5-(1,1- copy toner dimethylethyl)-2- (hydroxy- .kappa.o)phenyl]diaz enyl]-.kappa.n1]-3- (hydroxy-.kappa.o]-n- phenyl-2- naphthalenecarboxami dato(2-)], hydrogen (1:1) P-08-0078 11/13/07 02/10/08 CBI (S) PMN material in (G) Plant oil fragrance products P-08-0079 11/13/07 02/10/08 Reichhold, Inc. (S) Resin for paints/ (G) Amine salt of coatings polyester polyol, hydroxy substituted carboxylic acid, cycloaliphatic glycol, aliphatic diisocyanate and hydroxy substituted alkylamines. P-08-0080 11/13/07 02/10/08 Reichhold, Inc. (S) Resin for paints/ (G) Amine salt of coatings polyester polyol, cycloaliphatic glycol, hydroxy substituted carboxylic acid, alkyldiamine and aliphatic diisocyanate P-08-0081 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil, Additives fluid component maleated, ester with polyethylene glycol mono-C12 16-alkyl ethers P-08-0082 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil, Additives fluid component maleated, ester with polyethylene glycol mono-C12 16-alkyl ethers, potassium salts P-08-0083 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil, Additives fluid component maleated, ester with polyethylene glycol mono-C12 16-alkyl ethers, compound with ethanolamine P-08-0084 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil, Additives fluid component maleated, ester with polyethylene glycol mono-C12 16-alkyl ethers, compound with triethanolamine P-08-0085 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil, Additives fluid component maleated, ester with polyethylene glycol mono-C12 16-alkyl ethers, compound with branched 3- (tridecyloxy)-1- propanamine P-08-0086 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Amines, C12 14- Additives fluid component tert-alkyl, compounds with maleated soybean oil ester with polyethylene glycol mono-C12 16-alkyl ethers P-08-0087 11/14/07 02/11/08 CBI (G) Lubricant (G) Alkyl acid additive open, non- reaction products dispersive use with metal salt of alkyl alcohol P-08-0088 11/14/07 02/11/08 CBI (G) Emulsifier (G) Perfluorodioxyalkoni cacid salt P-08-0089 11/15/07 02/12/08 CBI (G) Component of (G) Fatty acid oils paint polymer with aromatic acid, acrylates, styrene, polyol and conjugated anhydrides P-08-0090 11/01/07 01/29/08 CBI (G) Modifier for (G) Epoxy liquid epoxy formulations polysulfide P-08-0091 11/13/07 02/10/08 Sasol North America (S) Polymer (S) Oxirane, 2-[[3- Inc. performance additive (trimethoxysilyl)pro poxy]methyl]-, reaction products with boehmite (al(oh)o) P-08-0092 11/13/07 02/10/08 Sasol North America (S) Polymer (S) Oxirane, 2-[[3- Inc. performance additive (trimethoxysilyl)pro poxy]methyl]-, reaction products with boehmite (al(oh)o) P-08-0093 11/16/07 02/13/08 CBI (G) Binder in foundry (G) Aromatic applications polyester polyol P-08-0094 11/19/07 02/16/08 CBI (G) Lubricant (G) Alkyl Additive methacrylate esters telomers with 1- dodecanethiol, tert- bu 2- ethylhexaneperoxoate- initiated P-08-0095 11/19/07 02/16/08 Cytec Industries Inc. (S) Process chemical (S) Phosphonium, for sulfur removal methyltris (2- from diesel fuel methylpropyl)-, salt with 4- methylbenzenesulfoni c acid (1:1) P-08-0096 11/26/07 02/23/08 CBI (G) Binder (G) Polymer of styrene-butadiene, polybutadiene, ethoxylated nonyl pheneol acrylate and 1,6-hexanediol diacrylate [[Page 3963]] P-08-0097 11/26/07 02/23/08 CBI (G) Binder (G) Polymer of styrene-butadiene, polybutanediene, ethoxylated nonyl pheneol acrylate and 1,6-hexanediol diacrylate P-08-0098 11/26/07 02/23/08 CBI (G) Binder (G) Polymer of styrene-butadiene, polybutanediene, ethoxylated nonyl pheneol acrylate and 1,6-hexanediol diacrylate P-08-0099 11/21/07 02/18/08 AOC LLC (S) Polyester (S) 1,4- component for benzenedicarboxylic pultrusion of acid, polymer with fiberglass 1,2-ethanediol, 2,5- reinforced plastic furandione, 2,2'- parts oxybis [ethanol] and 1,2-propanediol P-08-0100 11/26/07 02/23/08 CBI (G) Metalworking (G) Polypropylene fluid glycol succinate P-08-0101 11/26/07 02/23/08 Cytec Industries Inc. (G) Coating resin (S) Phosphinic acid, additive p,p-diphenyl- P-08-0102 11/26/07 02/23/08 CBI (G) Industrial liquid (G) Caprolactam- coatings blocked aliphatic isocyanate polymer P-08-0103 11/26/07 02/23/08 CBI (G) Intermediate (G) Dialkylmonoheterocyc ledione, homopolymer, ester with 1,2,3- propanetriol P-08-0104 11/28/07 02/25/08 CBI (G) Open, non- (G) Gallium, dispersive use phthalocyanine (additive to coating complex layer) P-08-0105 11/28/07 02/25/08 CBI (G) Open, non- (G) Azo compound dispersive use (additive to coating layer) P-08-0106 11/28/07 02/25/08 CBI (S) Binder for (S) 2-propenoic acid, coatings for wood 2-methyl-, polymer with butyl 2-methyl- 2-propenoate, butyl 2-propenoate, n-(1,1- dimethyl-3-oxobutyl)- 2-propenamide, ethenylbenzene and methyl 2-methyl-2- propenoate P-08-0107 11/28/07 02/25/08 CBI (G) Rubber additive (G) Alkoxy silane P-08-0108 11/28/07 02/25/08 CBI (G) Marker for liquid (G) Alkylphthalein petroleum fuels ester P-08-0109 11/29/07 02/26/08 CBI (G) Polyester (G) Disubstituted substrate auxiliary methoxyacetanilide P-08-0110 11/29/07 02/26/08 CBI (G) Raw material (G) Mixed metal halide -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received: II. 1 Test Marketing Exemption Notices Received From: 10/01/07 to 11/30/07 -------------------------------------------------------------------------------------------------------------------------------------------------------- Projected Notice End Case No. Received Date Date Manufacturer/Importer Use Chemical -------------------------------------------------------------------------------------------------------------------------------------------------------- T-08-0001 11/19/07 01/02/08 Cytec industries Inc. (S) Process chemical (S) Phosphonium, for sulfur removal methyltris (2- from diesel fuel methylpropyl)-, salt with 4- methylbenzenesulfoni c acid (1:1) -------------------------------------------------------------------------------------------------------------------------------------------------------- In Table III of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received: III. 41 Notices of Commencement From: 10/01/07 to 11/30/07 ---------------------------------------------------------------------------------------------------------------- Commencement Notice Case No. Received Date End Date Chemical ---------------------------------------------------------------------------------------------------------------- P-02-0748 11/05/07 10/10/07 (S) Heptacyclo[11.11.1.13,11. 15,21.17,19.19,17.115,23] dodecasiloxane, dodecaphenyl- P-02-0750 11/05/07 10/10/07 (S) Pentacyclo[9.5.1.13,9.15, 15.17,13]octasiloxane, octamethyl- P-02-0751 11/05/07 10/10/07 (S) Pentacyclo[9.5.1.13,9.15, 15.17,13]octasiloxane, octaphenyl- P-02-0778 11/07/07 10/10/07 (G) Dialkyl dithiocarbamate ester P-02-0860 11/14/07 10/16/07 (G) Silicoaluminophosphate with template P-05-0079 11/06/07 10/12/07 (G) Potassium salt of substituted arylazo butanamide P-05-0138 11/29/07 11/20/07 (G) Multifunctional acrylate oligomer resin P-05-0420 11/21/07 11/01/07 (S) Hexanoic acid, 6,6',6''-(1,3,5-triazine- 2,4,6-triyltriimino)tris- , compound with 1-amino-2- propanol [[Page 3964]] P-05-0423 11/21/07 11/01/07 (S) Hexanoic acid, 6,6',6''-(1,3,5-triazine- 2,4,6-triyltriimino)tris- , compound with 2-(2- aminoethoxy) ethanol P-06-0489 11/29/07 11/16/07 (G) Fluoroalkyl methacrylate copolymer P-06-0546 11/27/07 11/19/07 (G) Substituted carbomonocycle, polymer with isocyanate substituted alkyl carbomonocycle, substituted alkenoates, substituted heteromonocycle, alkanedioic acid, alkane diol, reaction products with substituted alkylamine, compounds with substituted alkanol P-06-0563 11/29/07 11/21/07 (G) Fluoroalkyl methacrylate copolymer P-06-0820 11/20/07 11/12/07 (G) Trisubstituted triazine P-07-0048 11/23/07 08/21/07 (G) Salt of amine with aliphatic acid P-07-0049 11/23/07 10/30/07 (G) Aliphatic polyamide P-07-0132 11/23/07 11/05/07 (G) Polyurethane prepolymer; polyurethane hot melt adhesive P-07-0156 11/21/07 10/10/07 (G) Aminomercapto siloxane P-07-0216 11/13/07 11/08/07 (G) Substituted phenyl amino alkyl sulfonyl reaction product with substituted naphthalenesulfonic acid amino compound P-07-0250 11/14/07 10/25/07 (G) Fatty acid modified polyester resin P-07-0300 11/02/07 10/29/07 (G) Acrylic polymer on the basis of isobutyl methacrylate P-07-0318 11/15/07 10/16/07 (G) Organic lithium compound P-07-0352 11/14/07 10/29/07 (G) Modified polymer of substituted acrylate and alkyl methacrylates P-07-0361 11/06/07 10/23/07 (G) Linseed oil, ester with pentaerythritol, polymer with hydrazine, 3- hydroxy-2- (hydroxymethyl)2- methylpropanoic acid, 5- isocyanato-1- (isocyanatomethyl)- alkylcyclohexane, 1,1'- methylenebis[4.isocyanato cyclohexane] and polypropylene glycol, compounds with triethylamine P-07-0392 11/05/07 10/08/07 (G) Modified epoxy resin P-07-0402 11/21/07 11/05/07 (G) Alkylphenoxy naphthalic acid amide, n- alkylphenyl- P-07-0408 11/05/07 10/16/07 (G) Epoxy phenolic resin P-07-0439 11/21/07 10/25/07 (G) Polycarboxylate, modified sodium salt P-07-0448 10/29/07 10/16/07 (G) Secondary amine adduct P-07-0495 11/09/07 10/19/07 (G) Amino substituted benzoic acid P-07-0498 11/26/07 11/06/07 (S) 2-propenoic acid, 2- methyl-, butyl ester, polymer with 2-ethylhexyl 2-propenoate, 2- methylpropyl 2-methyl-2- propenoate and 1,2- propanediol mono(2-methyl- 2-propenoate), tert-bu 3,5,5- trimethylhexaneperoxoate- initiated P-07-0519 11/01/07 10/05/07 (G) Aminobenzene P-07-0525 11/05/07 10/21/07 (G) Fatty acids, hydrogenated, reaction products with tetraethylenepentamine, aliphatic carboxylate P-07-0529 10/31/07 10/18/07 (G) 2-propenoic acid, 2- methyl-, telomer with 1- alkylthiol, alkyl 2- propenoate and alkyl 2- methyl-2-propenoate, ammonium salt P-07-0539 11/20/07 11/15/07 (G) Epoxy acrylic resin P-07-0560 10/29/07 10/19/07 (G) Acrylate modified acrylonitrile, butadiene, styrene polymer P-07-0561 11/06/07 10/23/07 (G) Metal salt of styrene acrylic copolymer P-07-0569 11/26/07 10/29/07 (S) Siloxanes and silicones, di-me, me [(2- methyl-1-oxo-2-propen-1- yl)oxy]methyl, [(methoxymethyl[[(2- methyl-1-oxo-2-propen-1- yl)oxy]methyl)silyl]oxy]- terminated P-07-0630 11/30/07 11/27/07 (G) Polyester polyether urethane block copolymer P-99-0303 11/30/07 11/27/07 (G) N-butyl, 2-ethylhexyl acrylate copolymer ---------------------------------------------------------------------------------------------------------------- List of Subjects Environmental protection, Chemicals, Premanufacturer notices. Dated: January 14, 2008. Chandler Sirmons, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics. [FR Doc. E8-1003 Filed 1-22-08; 8:45 am] BILLING CODE 6560-50-S