Magnet Configuration Sheet
Configuration: RD0 Revision: A Main Assy No.: 5520-ME-331957 Rev.: 0
Prepared by: N. Chester Rel. Date: July 2, 1997.
MIR IDA (240") Dipole Magnet
Main Assembly Drawings and Specifications
Serial # 001 to Serial # 003
The Drawings and Specifications shown below have been reviewed and approved by the
following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes Phil Martin
FMI MP Requirements/Liason Physicist D. Harding/S. Holmes David Harding
FMI MP Project Manager G. Pewitt/V. Yarba E. Gale Pewitt
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/R. Rihel John Carson
FMI MP QA/QC-Materials Control G.Kobliska/G. Pewitt Greg Kobliska
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass John Tompkins
Drawings & Specifications
Description Part Number Rev. Serial Sequence
240" A - Final Magnet Assembly 5520-ME-331957 0 001 - 003
240" A - Magnet Assembly 5520 ME 331952 0 001 - 003
*240" A - Magnet Assembly 5520 ME 274896 B 011YT- 013YT
240" A - Upper Coil Insulation 5520 ME 274835 F 011YT- 013YT
240" A - Lower Coil Insulation 5520 ME 274836 F 011YT- 013YT
240" A - Upper Coil Fabrication 5520 ME 274799 F 011YT- 013YT
240" A - Lower Coil Fabrication 5520 ME 274800 E 011YT- 013YT
240" A - Lower CoiL Thru Lead 5520 ME 274831 C 011YT- 013YT
240" A - Upper Half Core 5520 ME 274884 C 012Z, 011Z, 013S
240" A - Lower Half Core 5520 ME 318054 G 012Z, 011Z, 013S
*240" A - Beam Tube Assembly 5520 MD 331589 A
240" A - Steel Specification 8020 ES 186651 E
*240" A - Core Specification 5520 ES 274954 A
*240" A - Bare Coil Specification 5520 ES 274941 3
240" A - Insulated Coil Specification 5520 ES 274953 A
*240" A - Serialization Specification 5520 ES 318691 A
240" A - Beam Tube Specification 1353 ES 296202 0
*Revision DescriptionCorrected MCS Main Assembly No. and added Beam Tube Assy. And Magnet Assy. to sheet. Updated tp proper Rev. Coil Spec.; Corrected
Serial Spec.and Rev. No.; Core Spec was Rev. B.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 0 Revision: B Main Assy No.: 5520-ME-318523 Rev.: A
Prepared by: N. Chester Rel. Date: July 2, 1997.
MIR IDA (240") Dipole Magnet
Main Assembly Drawings and Specifications
Serial # 008 & Serial # 004
The Drawings and Specifications shown below have been reviewed and approved by the
following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes Phil Martin
FMI MP Requirements/Liason Physicist D. Harding/S. Holmes David Harding
FMI MP Project Manager G. Pewitt/V. Yarba E. Gale Pewitt
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/R. Rihel John Carson
FMI MP QA/QC-Materials Control G.Kobliska/G. Pewitt Greg Kobliska
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass John Tompkins
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*240" A - Final Magnet Assembly 5520-ME-318523 A 008/004
240" A - Magnet Assembly 5520 ME 274896 H 008/004
240" A - Upper Coil Insulation 5520 ME 274835 G 021-046
240" A - Lower Coil Insulation 5520 ME 274836 G 021-046
240" A - Upper Coil Fabrication 5520 ME 274799 F 021-046
240" A - Lower Coil Fabrication 5520 ME 274800 E 021-046
240" A - Lower CoiL Thru Lead 5520 ME 274831 C 021-046
*240" A - Upper Half Core 5520 ME 274884 J 014, 016
240" A - Lower Half Core 5520 ME 318054 L 014, 016
*240" A - Beam Tube Assembly 5520 MD 331589 E
240" A - Steel Specification 8020 ES 186651 E
*240" A - Core Specification 5520 ES 274954 A
*240" A - Bare Coil Specification 5520 ES 274941 3
240" A - Insulated Coil Specification 5520 ES 274953 A
*240" A - Serialization Specification 5520 ES 318691 A
240" A - Beam Tube Specification 1353 ES 296202 0
*Revision Description: Revised note to clarify end cover assy; Revised note to
clarify mounting of alignment lug. Added Beam Tube Assy. to MCS. Updated to
proper Rev. Coil Spec.; Corrected Serial Spec.and Rev. No.; .Core Spec was
Rev. B.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 1 Revision: C Main Assy No.: 5520-ME-318523 Rev.: A
Prepared by: N. Chester Rel. Date: July 2, 1997.
MIR IDA (240") Dipole Magnet
Main Assembly Drawings and Specifications
Serial # 005 to Serial #
The Drawings and Specifications shown below have been reviewed and approved by the
following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes Phil Martin
FMI MP Requirements/Liason Physicist D. Harding/S. Holmes David Harding
FMI MP Project Manager G. Pewitt/V. Yarba E. Gale Pewitt
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/R. Rihel John Carson
FMI MP QA/QC-Materials Control G.Kobliska/G. Pewitt Gregg Kobliska
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass John Tompkins
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*240" A - Final Magnet Assembly 5520-ME-318523 A
240" A - Magnet Assembly 5520 ME 274896 H
240" A - Upper Coil Insulation 5520 ME 274835 G 021-046
240" A - Lower Coil Insulation 5520 ME 274836 G 021-046
240" A - Upper Coil Fabrication 5520 ME 274799 F 021-046
240" A - Lower Coil Fabrication 5520 ME 274800 E 021-046
240" A - Lower CoiL Thru Lead 5520 ME 274831 C 021-046
*240" A - Upper Half Core 5520 ME 274884 J Other than 014, 016
240" A - Lower Half Core 5520 ME 318054 L Other than 014, 017
*240" A - Beam Tube Assembly 5520 MD 331589 A
240" A - Steel Specification 8020 ES 186651 E
*240" A - Core Specification 5520 ES 274954 A
*240" A - Bare Coil Specification 5520 ES 274941 3
240" A - Insulated Coil Spec. 5520 ES 274953 A
*240" A - Serialization Spec. 5520 ES 331034 A
240" A - Beam Tube Specification 1353 ES 296202 0
*Revision Description: Revised note to clarify end cover assy; Revised note to
clarify mounting of alignment lug. Added Beam Tube Assy. to MCS. Updated to
proper Rev. Coil Spec.; Corrected Serial Spec.and Rev. No.; .Core Spec was
Rev. B.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 2 Revision: C Main Assy No.: 5520-ME-318523 Rev.: A
Prepared by: N. Chester Rel. Date: July 2, 1997.
MIR IDA (240") Dipole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by the
following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes Phil Martin
FMI MP Requirements/Liason Physicist D. Harding/S. Holmes David Harding
FMI MP Project Manager G. Pewitt/V. Yarba E. Gale Pewitt
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J.Carson
FMI MP Engineer, Production J. Carson/R. Rihel John Carson
FMI MP QA/QC-Materials Control G.Kobliska/G. Pewitt Greg Kobliska
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass John Tompkins
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*240" A - Final Magnet Assembly 5520-ME-318523 A
*240" A - Magnet Assembly 5520 ME 274896 C
240" A - Upper Coil Insulation 5520 ME 274835 G 047-065
240" A - Lower Coil Insulation 5520 ME 274836 G 047-065
*240" A - Upper Coil Fabrication 5520 ME 274799 L 047-065
*240" A - Lower Coil Fabrication 5520 ME 274800 K 047-065
*240" A - Lower CoiL Thru Lead 5520 ME 274831 H 047-065
*240" A - Upper Half Core 5520 ME 274884 J
*240" A - Lower Half Core 5520 ME 318054 L
*240" A - Beam Tube Assembly 5520 MD 331589 A
240" A - Steel Specification 8020 ES 186651 E
*240" A - Core Specification 5520 ES 274954 A
*240" A - Bare Coil Specification 5520 ES 274941 3
240" A - Insulated Coil Specification 5520 ES 274953 A
*240" A - Serialization Specification 5520 ES 318691 A
240" A - Beam Tube Specification 1353 ES 296202 0
*Revision Description: Revised note to clarify end cover assy; Revised note to
clarify mounting of alignment lug. Added Beam Tube Assy. to MCS. Magnet Assembly Rev.
corrected to Rev. "C". Coil Fab. dwg. errors corrected; Added alignment lugs, and ball
tab mounting note. Updated to proper Rev.for Coil Spec.; Corrected Serial Spec. and
Rev. No.; Core spec. was Rev. B.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 3.1 Revision: C Main Assy No.: 5520-ME-318523 Rev.: A
Prepared by: N. Chester Rel. Date: July 2, 1997.
MIR IDA (240") Dipole Magnet
Main Assembly Drawings and Specifications
Serial # 022+ to Serial #
The Drawings and Specifications shown below have been reviewed and approved by the
following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes Phil Martin
FMI MP Requirements/Liason Physicist D. Harding/S. Holmes David Harding
FMI MP Project Manager G. Pewitt/V. Yarba E. Gale Pewitt
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/R. Rihel John Carson
FMI MP QA/QC-Materials Control G.Kobliska/G. Pewitt Greg Kobliska
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass John Tompkins
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*240" A - Final Magnet Assembly 5520-ME-318523 A 022+
240" A - Magnet Assembly 5520 ME 274896 H 022+
240" A - Upper Coil Insulation 5520 ME 274835 G 021-046
240" A - Lower Coil Insulation 5520 ME 274836 G 021-046
*240" A - Upper Coil Fabrication 5520 ME 274799 L 021-046
*240" A - Lower Coil Fabrication 5520 ME 274800 K 021-046
*240" A - Lower CoiL Thru Lead 5520 ME 274831 H 021-046
*240" A - Upper Half Core 5520 ME 274884 J Other than 014, 016
240" A - Lower Half Core 5520 ME 318054 L Other than 014, 017
*240" A - Beam Tube Assembly 5520 MD 331589 A
240" A - Steel Specification 8020 ES 186651 E
*240" A - Core Specification 5520 ES 274954 A
*240" A - Bare Coil Specification 5520 ES 274941 3
240" A - Insulated Coil Specification 5520 ES 274953 A
*240" A - Serialization Specification 5520 ES 318691 A
240" A - Beam Tube Specification 1353 ES 296202 0
*Revision Description: Revised note to clarify end cover assy; Revised note to
clarify mounting of alignment lug. Added Beam Tube Assy. to MCS. Magnet Assembly Rev.
corrected to Rev. "C". Coil Fab. dwg. errors corrected; Updated to proper Rev.for Coil
Spec.; Corrected Serial Spec. and Rev. No.; Core spec. was Rev. B.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 3.2 Revision: C Main Assy No.: 5520-ME-318523 Rev.: A
Prepared by: N. Chester Rel. Date: July 2, 1997.
MIR IDA (240") Dipole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by the
following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes Phil Martin
FMI MP Requirements/Liason Physicist D. Harding/S. Holmes David Harding
FMI MP Project Manager G. Pewitt/V. Yarba E. Gale Pewitt
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/R. Rihel John Carson
FMI MP QA/QC-Materials Control G.Kobliska/G. Pewitt Greg Kobliska
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass John Tompkins
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*240" A - Final Magnet Assembly 5520-ME-318523 A 022+
240" A - Magnet Assembly 5520 ME 274896 H 022+
240" A - Upper Coil Insulation 5520 ME 274835 G 047-065
240" A - Lower Coil Insulation 5520 ME 274836 G 047-065
*240" A - Upper Coil Fabrication 5520 ME 274799 L 047-065
*240" A - Lower Coil Fabrication 5520 ME 274800 K 047-065
*240" A - Lower CoiL Thru Lead 5520 ME 274831 H 047-065
*240" A - Upper Half Core 5520 ME 274884 J Other than 014, 016
240" A - Lower Half Core 5520 ME 318054 L Other than 014, 017
*240" A - Beam Tube Assembly 5520 MD 331589 A
240" A - Steel Specification 8020 ES 186651 E
*240" A - Core Specification 5520 ES 274954 A
*240" A - Bare Coil Specification 5520 ES 274941 3
240" A - Insulated Coil Specification 5520 ES 274953 A
*240" A - Serialization Specification 5520 ES 318691 A
240" A - Beam Tube Specification 1353 ES 296202 0
*Revision Description: Revised note to clarify end cover assy; Revised note to
clarify mounting of alignment lug. Added Beam Tube Assy. to MCS. Magnet Assembly Rev.
corrected to Rev. "C". Coil Fab. dwg. errors corrected; Updated to proper Rev.for Coil
Spec.; Corrected Serial Spec. and Rev. No.; Core spec. was Rev. B.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 4 Revision: B Main Assy No.: 5520-ME-318523 Rev.: A
Prepared by: N. Chester Rel. Date: July 2, 1997.
MIR IDA (240") Dipole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by the
following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes Phil Martin
FMI MP Requirements/Liason Physicist D. Harding/S. Holmes David Harding
FMI MP Project Manager G. Pewitt/V. Yarba E. Gale Pewitt
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/R. Rihel John Carson
FMI MP QA/QC-Materials Control G.Kobliska/G. Pewitt Greg Kobliska
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass John Tompkins
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*240" A - Final Magnet Assembly 5520-ME-318523 A
240" A - Magnet Assembly 5520 ME 274896 H
240" A - Upper Coil Insulation 5520 ME 274835 H 063+
240" A - Lower Coil Insulation 5520 ME 274836 H 057+
240" A - Upper Coil Fabrication 5520 ME 274799 L
240" A - Lower Coil Fabrication 5520 ME 274800 K
240" A - Lower CoiL Thru Lead 5520 ME 274831 H
*240" A - Upper Half Core 5520 ME 274884 J 021+
240" A - Lower Half Core 5520 ME 318054 L 021+
*240" A - Beam Tube Assembly 5520 MD 331589 A
240" A - Steel Specification 8020 ES 186651 E
*240" A - Core Specification 5520 ES 274954 A
240" A - Bare Coil Specification 5520 ES 274941 3
240" A - Insulated Coil Specification 5520 ES 274953 A
*240" A - Serialization Specification 5520 ES 318691 A
240" A - Beam Tube Specification 1353 ES 296202 0
*Revision Description: Revised note to clarify end cover assy; Revised note to
clarify mounting of alignment lug. Beam Tube Assy. added to MCS. Corrected Core Spec.
Revision and Serial Spec. No. and Rev.