Magnet Configuration Sheet
Configuration: 0 Revision: 0 Main Assy No.: ME - 351192 Rev.: D
Prepared by: N. Chester Rel. Date: October 10, 1997
MIR HDC Reworked Horizontal Trim Dipole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by
the following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes
FMI MP Requirements/Liaison Physicist D. Harding/S. Holmes
FMI MP Project Manager G. Pewitt/V. Yarba
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/R. Rihel
FMI MP QA/QC-Materials Control G. Kobliska/G. Pewitt
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*Reworked Magnet Assembly ME- 351192 D
Magnet Assembly ME - 14269 ??
*Support Bar ME - 351202 A
Test Specifications ES-351499 -
* Revision Description: Replaced Support Feet and added Flexible Lead Wires.
Re-epoxied Coils in Place as Necessary.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 0 Revision: 0 Main Assy No.: ME - 351498 Rev.: -
Prepared by: N. Chester Rel. Date: January 12, 1998
MIR HDD Reworked Strong Horizontal Trim Dipole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by
the following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes
FMI MP Requirements/Liaison Physicist D. Harding/S. Holmes
FMI MP Project Manager G. Pewitt/V. Yarba
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/D. Smith
FMI MP QA/QC-Materials Control G. Kobliska/G. Pewitt
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*Reworked Magnet Assembly ME - 351498 -
Magnet Assembly ME - 85033 ??
*Support Bar ME - 351202 A
Test Specifications ES-351499 -
* Revision Description: Replaced Support Feet and added Flexible Lead Wires.
Re-epoxied Coils in Place as Necessary.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 0 Revision: 0 Main Assy No.: ME - 351193 Rev.: D
Prepared by: N. Chester Rel. Date: October 10, 1997
MIR HDR Reworked Rolled Horizontal Trim Dipole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by
the following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes
FMI MP Requirements/Liaison Physicist D. Harding/S. Holmes
FMI MP Project Manager G. Pewitt/V. Yarba
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/R. Rihel
FMI MP QA/QC-Materials Control G. Kobliska/G. Pewitt
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass
Drawings & Specifications
Description Part Number Rev. Serial Sequence
Reworked Magnet Assembly ME - 351193 D
Magnet Assembly ME - 14269 ??
Support Weldment MB - 351328 -
Test Specifications ES-351499 -
* Revision Description: Replaced Support Feet and added Flexible Lead Wires.
Re-epoxied Coils in Place as Necessary.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 0 Revision: 0 Main Assy No.: ME - 351194 Rev.: D
Prepared by: N. Chester Rel. Date: October 15, 1997
MIR VDC Reworked Vertical Trim Dipole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by
the following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes
FMI MP Requirements/Liaison Physicist D. Harding/S. Holmes
FMI MP Project Manager G. Pewitt/V. Yarba
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/R. Rihel
FMI MP QA/QC-Materials Control G. Kobliska/G. Pewitt
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass
Drawings & Specifications
Description Part Number Rev. Serial Sequence
Reworked Magnet Assembly ME - 351194 D
Magnet Assembly ME - 14278 ??
Right Hand Support Weldment MB - 351329 A
Left Hand Support Weldment MB - 351330 B
Test Specifications ES-351499 -
* Revision Description: Replaced Support Feet and added Flexible Lead Wires.
Re-epoxied Coils in Place as Necessary.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 0 Revision: 0 Main Assy No.: ME - 351349 Rev.: B
Prepared by: N. Chester Rel. Date: January 5, 1998
MIR MQT Reworked Trim Quadrupole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by
the following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes
FMI MP Requirements/Liaison Physicist D. Harding/S. Holmes
FMI MP Project Manager G. Pewitt/V. Yarba
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/D. Smith
FMI MP QA/QC-Materials Control G. Kobliska/G. Pewitt
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*Reworked Magnet Assembly ME - 351349 B
Magnet Assembly ME - 14397 ??
*Support Weldment ME - 351346 B
*Serial Number Specification MA - 343429 -
*Test Specifications MA - 351471 A
* Revision Description: Replaced Support Feet and added Flexible Lead Wires.
Re-epoxied Coils in Place as Necessary.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 0 Revision: 0 Main Assy No.: ME - 351348 Rev.: B
Prepared by: N. Chester Rel. Date: January 5, 1998
MIR MOA Reworked Trim Octupole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by
the following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes
FMI MP Requirements/Liaison Physicist D. Harding/S. Holmes
FMI MP Project Manager G. Pewitt/V. Yarba
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/D. Smith
FMI MP QA/QC-Materials Control G. Kobliska/G. Pewitt
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*Reworked Magnet Assembly ME - 351348 B
Magnet Assembly ME - 16675 ??
Support Weldment MB - 351343 A
Test Specifications ES - 351471 A
Serial Number Specification MA-343429 -
* Revision Description: Replaced Support Feet and added Flexible Lead Wires.
Re-epoxied Coils in Place as Necessary.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 0 Revision: 0 Main Assy No.: ME - 351364 Rev.: B
Prepared by: N. Chester Rel. Date: January 5, 1998
MIR MSA Reworked Trim Sextupole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by
the following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes
FMI MP Requirements/Liaison Physicist D. Harding/S. Holmes
FMI MP Project Manager G. Pewitt/V. Yarba
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/D. Smith
FMI MP QA/QC-Materials Control G. Kobliska/G. Pewitt
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*Reworked Magnet Assembly ME - 351364 B
Magnet Assembly ME - 14405 ??
Support Weldment MB - 351430 A
Test Specifications ES - 351471 A
Serial Number Specification MA-343429 -
* Revision Description: Replaced Support Feet and added Flexible Lead Wires.
Re-epoxied Coils in Place as Necessary.
--------------------------------------------------------------------------------
Magnet Configuration Sheet
Configuration: 0 Revision: 0 Main Assy No.: ME - 351350 Rev.: B
Prepared by: N. Chester Rel. Date: January 5, 1998
MIR MQS Reworked Trim Skew Sextupole Magnet
Main Assembly Drawings and Specifications
Serial # to Serial #
The Drawings and Specifications shown below have been reviewed and approved by
the following Management Personnel:
Title Member/Alternate Signature
FMI Assoc. Proj. Mgr. Beams Division P. Martin/S. Holmes
FMI MP Requirements/Liaison Physicist D. Harding/S. Holmes
FMI MP Project Manager G. Pewitt/V. Yarba
TD Group Leader, Magnet Design &Fabrication V. Yarba/J. Carson
FMI MP Engineer, Design N. Chester/J. Carson
FMI MP Engineer, Production J. Carson/D. Smith
FMI MP QA/QC-Materials Control G. Kobliska/G. Pewitt
TD Group Leader, Magnet Test Facility J. Tompkins/H. Glass
Drawings & Specifications
Description Part Number Rev. Serial Sequence
*Reworked Magnet Assembly ME - 351350 B
Magnet Assembly ME - 16699 ??
Support Weldment MB - 351347 A
Test Specifications ES - 351471 A
Serial Number Specification MA-343429 -
* Revision Description: Replaced Support Feet and added Flexible Lead Wires.
Re-epoxied Coils in Place as Necessary.
Legal Notices