C Copyright(c) 1999, Space Science and Engineering Center, UW-Madison
C Refer to "McIDAS Software Acquisition and Distribution Policies"
C in the file  mcidas/data/license.txt

C *** $Id: nvxgvar.dlm,v 1.15 1999/05/24 18:31:59 beckys Tst $ ***

      INTEGER FUNCTION NVXINI(IFUNC,IPARMS)
      IMPLICIT NONE

C     INCLUDE 'ELCONS.INC'
C=========================== DIELCONS =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCONS = INCLUDE

      DOUBLE PRECISION PI
           PARAMETER (PI=3.141592653589793D0)
      DOUBLE PRECISION DEG
           PARAMETER (DEG=180.D0/PI)
      DOUBLE PRECISION RAD
           PARAMETER (RAD=PI/180.D0)
C                    DEGREES TO RADIANS CONVERSION PI/180
      DOUBLE PRECISION NOMORB
           PARAMETER (NOMORB=42164.365D0)
C                    NOMINAL RADIAL DISTANCE OF SATELLITE (KM)
      DOUBLE PRECISION AE
           PARAMETER (AE=6378.137D0)
C                    EARTH EQUATORIAL RADIUS (KM)
      DOUBLE PRECISION FER
           PARAMETER (FER=1.D0-(6356.7533D0/AE))
C                    EARTH FLATTENING COEFFICIENT = 1-(BE/AE)
      REAL AEBE2
           PARAMETER (AEBE2=1.D0/(1.D0-FER)**2)
      REAL AEBE3
           PARAMETER (AEBE3=AEBE2-1.)
      REAL AEBE4
           PARAMETER (AEBE4=(1.D0-FER)**4-1.)
C========================= END DIELCONS ===========================
C     INCLUDE 'ELCOMM.INC'
C=========================== DIELCOMM =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCOMM = INCLUDE

C     COMMON VARIABLES
C
      DOUBLE PRECISION XS(3)
C                      NORMALIZED S/C POSITION IN ECEF COORDINATES
      DOUBLE PRECISION BT(3,3)
C                      ECEF TO INSTRUMENT COORDINATES TRANSFORMATION
      DOUBLE PRECISION  Q3
C                      USED IN SUBRTN LPOINT
      DOUBLE PRECISION PITCH,ROLL,YAW
C                          PITCH,ROLL,YAW ANGLES OF INSTRUMENT (RAD)
      REAL PMA,RMA
C                          PITCH,ROLL MISALIGNMENTS OF INSTRUMENT (RAD)
         COMMON /ELCOMM/ XS,BT,Q3,PITCH,ROLL,YAW,PMA,RMA
C========================= END DIELCOMM ===========================
C     INCLUDE 'INSTCO.INC'
C=========================== DIINSTCO =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIINSTCO = INCLUDE

      INTEGER INCMAX(2)
C                       NUMBER OF INCREMENTS PER CYCLE
      REAL ELVMAX(2)
C                       BOUNDS IN ELEVATION (RADIANS)
      REAL SCNMAX(2)
C                       BOUNDS IN SCAN ANGLE (RADIANS)
      REAL ELVINC(2)
C                       CHANGE IN ELEVATION ANGLE PER INCREMENT (RAD)
      REAL SCNINC(2)
C                       CHANGE IN SCAN ANGLE PER INCREMENT (RADIANS)
      REAL ELVLN(2)
C                       ELEVATION ANGLE PER DETECTOR LINE (RADIANS)
      REAL SCNPX(2)
C                       SCAN ANGLE PER PIXEL (RADIANS)
      REAL EWNOM(2)
C                       EW CENTER OF INSTRUMENT
      REAL NSNOM(2)
C                       NS CENTER OF INSTRUMENT


      COMMON /INSTCO/ INCMAX,ELVMAX,SCNMAX,
     &   ELVINC,SCNINC,ELVLN,SCNPX,EWNOM,NSNOM
C========================= END DIINSTCO ===========================
C     INCLUDE 'GVRCOD.INC'
C=========================== DIGVRCOD =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE GVAR NAVIGATION SUBSYSTEM.
C $
C $   DESCRIPTION:
C $      THESE ARE CONSTANTS USED TO DESCRIBE THE GVAR CODICIL STRUCTURE
C $
C $$  DIGVRCOD = INCLUDE, NAVIGATION, GVAR

C DEFINITIONS OF PARAMETERS
C STTYPE   : POSITION OF SATELLITE TYPE
C ETIME    : POSITION OF EPOCH TIME
C IMCACT   : POSITION OF IMC ACTIVE FLAG
C IYFLIP   : POSITION OF YAW FLIP ENABLED FLAG
C IMGDAY   : POSITION OF IMAGE DAY VALUE  (YYDDD)
C IMGTM    : POSITION OF IMAGE TIME VALUE (HHMMSS)
C REFLON   : POSITION OF REFERENCE LONGITUDE
C REFDIS   : POSITION OF REFERENCE DISTANCE FROM NOMINAL
C REFLAT   : POSITION OF REFERENCE LATITUDE
C REFYAW   : POSITION OF REFERENCE YAW
C RATROL   : POSITION OF REFERENCE ATTITUDE ROLL
C RATPTC   : POSITION OF REFERENCE ATTITUDE PITCH
C RATYAW   : POSITION OF REFERENCE ATTITUDE YAW
C LDR1-13  : LOCATION OF LONGITUDE DELTA FROM REFERENCE PARAMETERS
C RDDR1-11 : LOCATION OF RADIAL DISTANCE DELTA FROM REFERENCE PARAMETERS
C DGL1-9   : LOCATION OF GEOCENTRIC LATITUDE DELTA PARAMETERS
C DOY1-9   : LOCATION OF ORBIT YAW DELTA PARAMETERS
C EXPTIM   : EXPONENTIAL START TIME FROM EPOCH
C RAAWDS   : LOCATION OF START OF ROLL ATTITUDE ANGLE WORDS
C PAAWDS   : LOCATION OF START OF PITCH ATTITUDE ANGLE WORDS
C YAAWDS   : LOCATION OF START OF YAW ATTITUDE ANGLE WORDS
C RMAWDS   : LOCATION OF START OF ROLL MISALIGNMENT ANGLE WORDS
C PMAWDS   : LOCATION OF START OF PITCH MISALIGNMENT ANGLE WORDS
C EDTIME   : LOCATION OF DELTA FROM EPOCH TIME
C IMCROL   : LOCATION OF IMAGE MOTION COMPENSATION ROLL
C IMCPTC   : LOCATION OF IMAGE MOTION COMPENSATION PITCH
C IMCYAW   : LOCATION OF IMAGE MOTION COMPENSATION YAW
C IMGSND   : LOCATION OF IMAGER/SOUNDER INSTRUMENT FLAG

      INTEGER      ETIME , IMCACT, IMGDAY, IMGTM , RATROL, RATPTC
      INTEGER      RATYAW, LDR1  , LDR2  , LDR3  , LDR4  , LDR5
      INTEGER      LDR6  , LDR7  , LDR8  , LDR9  , LDR10 , LDR11
      INTEGER      LDR12 , LDR13 , RDDR1 , RDDR2 , RDDR3 , RDDR4
      INTEGER      RDDR5 , RDDR6 , RDDR7 , RDDR8 , RDDR9 , RDDR10
      INTEGER      RDDR11, DGL1  , DGL2  , DGL3  , DGL4  , DGL5
      INTEGER      DGL6  , DGL7  , DGL8  , DGL9  , DOY1  , DOY2
      INTEGER      DOY3  , DOY4  , DOY5  , DOY6  , DOY7  , DOY8
      INTEGER      DOY9  , EXPTIM, RAAWDS, PAAWDS, YAAWDS, RMAWDS
      INTEGER      PMAWDS, EDTIME, IMCROL, IMCPTC, IMCYAW, IMGSND
      INTEGER      REFLON, REFDIS, REFLAT, REFYAW, STTYPE, IDNTFR
      INTEGER      IOFNC , IOFNI , IOFEC , IOFEI,  IYFLIP

      PARAMETER (STTYPE = 1)
      PARAMETER (IDNTFR = 2)
      PARAMETER (IMCACT = 3)
      PARAMETER (IYFLIP  = 4)
      PARAMETER (REFLON = 6)
      PARAMETER (REFDIS = 7)
      PARAMETER (REFLAT = 8)
      PARAMETER (REFYAW = 9)
      PARAMETER (RATROL = 10)
      PARAMETER (RATPTC = 11)
      PARAMETER (RATYAW = 12)
      PARAMETER (ETIME  = 13)
      PARAMETER (EDTIME = 15)
      PARAMETER (IMCROL = 16)
      PARAMETER (IMCPTC = 17)
      PARAMETER (IMCYAW = 18)
      PARAMETER (LDR1   = 19)
      PARAMETER (LDR2   = 20)
      PARAMETER (LDR3   = 21)
      PARAMETER (LDR4   = 22)
      PARAMETER (LDR5   = 23)
      PARAMETER (LDR6   = 24)
      PARAMETER (LDR7   = 25)
      PARAMETER (LDR8   = 26)
      PARAMETER (LDR9   = 27)
      PARAMETER (LDR10  = 28)
      PARAMETER (LDR11  = 29)
      PARAMETER (LDR12  = 30)
      PARAMETER (LDR13  = 31)
      PARAMETER (RDDR1  = 32)
      PARAMETER (RDDR2  = 33)
      PARAMETER (RDDR3  = 34)
      PARAMETER (RDDR4  = 35)
      PARAMETER (RDDR5  = 36)
      PARAMETER (RDDR6  = 37)
      PARAMETER (RDDR7  = 38)
      PARAMETER (RDDR8  = 39)
      PARAMETER (RDDR9  = 40)
      PARAMETER (RDDR10 = 41)
      PARAMETER (RDDR11 = 42)
      PARAMETER (DGL1   = 43)
      PARAMETER (DGL2   = 44)
      PARAMETER (DGL3   = 45)
      PARAMETER (DGL4   = 46)
      PARAMETER (DGL5   = 47)
      PARAMETER (DGL6   = 48)
      PARAMETER (DGL7   = 49)
      PARAMETER (DGL8   = 50)
      PARAMETER (DGL9   = 51)
      PARAMETER (DOY1   = 52)
      PARAMETER (DOY2   = 53)
      PARAMETER (DOY3   = 54)
      PARAMETER (DOY4   = 55)
      PARAMETER (DOY5   = 56)
      PARAMETER (DOY6   = 57)
      PARAMETER (DOY7   = 58)
      PARAMETER (DOY8   = 59)
      PARAMETER (DOY9   = 60)
      PARAMETER (EXPTIM = 62)
      PARAMETER (RAAWDS = 63)
      PARAMETER (PAAWDS = 130)
      PARAMETER (YAAWDS = 185)
      PARAMETER (RMAWDS = 258)
      PARAMETER (PMAWDS = 313)

      PARAMETER (IMGDAY = 368)
      PARAMETER (IMGTM  = 369)
      PARAMETER (IMGSND = 370)

C THESE FOUR WORDS WERE ADDED 5-26-94 TO COMPLY W/ THE NEW ELUG
C NUMBERING STARTED AT 380 BECAUSE THESE SAME PARAMETERS ARE USED
C IN THE NAV MESSAGE SENT FROM THE INGESTOR TO EVX, AND WE HAD TO
C START SOMEWHERE AFTER THE 378 NAV PARAMETERS
      PARAMETER (IOFNC = 380)
      PARAMETER (IOFEC = 381)
      PARAMETER (IOFNI = 382)
      PARAMETER (IOFEI = 383)

C========================= END DIGVRCOD ===========================
C     INCLUDE 'MXCDSZ.INC'
C=========================== DIMXCDSZ =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE NAVIGATION SUBSYSTEM
C $
C $   DESCRIPTION:
C $      THIS IS THE VALUE OF LARGEST NAVIGATION CODICIL SIZE ALLOWED
C $
C $$  DIMXCDSZ = INCLUDE, NAVIGATION

C DEFINITIONS OF PARAMETERS
C MXCDSZ   : LARGEST ALLOWED CODICIL SIZE

      INTEGER      MXCDSZ

      PARAMETER (MXCDSZ = 5*128)

C========================= END DIMXCDSZ ===========================
C     INCLUDE 'OASET.INC'
C=========================== DIOASET =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE GVAR NAVIGATION SUBSYSTEM.
C $
C $   DESCRIPTION:
C $      THESE ARE CONSTANTS USED TO DESCRIBE THE GVAR O&A SET STRUCTURE
C $
C $$  DIOASET = INCLUDE, NAVIGATION, GVAR

C DEFINITIONS OF PARAMETERS
C OASIZE   : SIZE OF GVAR ORBIT AND ATTITUDE SET
C PCOEFS   : START OF PITCH COEFFICIENTS
C RMACFS   : START OF RMA COEFFICIENTS
C CUTOF1   : FIRST DIVIDING POINT IN O&A SET (WHERE DIVIDED INTO 128
C            WORD SETS)
C CUTOF2   : SECOND DIVIDING POINT IN O&A SET (WHERE DIVIDED INTO 128
C            WORD SETS)

      INTEGER      OASIZE, PCOEFS, RMACFS, CUTOF1, CUTOF2

      PARAMETER (OASIZE = 336)
      PARAMETER (PCOEFS = 117)
      PARAMETER (RMACFS = 227)
      PARAMETER (CUTOF1 = 116)
      PARAMETER (CUTOF2 = 226)

C========================= END DIOASET ===========================
C     INCLUDE 'B11DOC.INC'
C=========================== DIB11DOC =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE DECODER SCHEDULER SUBSYSTEM.
C $
C $   DESCRIPTION:
C $      THESE ARE INDICES INTO THE SOUNDER DOCUMENTATION BLOCK
C $      (INDICES ARE 1-BASED FROM START OF SAD ID)
C $
C $$  DIB11DOC = INCLUDE, DECODER

C DEFINITIONS OF PARAMETERS
C     SSCAN   SOUNDER SCAN STATUS IN TWO BYTES
C     SGBCT   TOTAL NUMBER OF BLOCK 11'S IN THIS SCAN (INCLUDES DOC)
C     TSCLS   TIME OF SCAN LINE START IN 8 BYTES
C     NEWIMG  BIT # IN SSCAN FOR NEW IMAGE FLAG
C     ENDIMG  BIT # IN SSCAN FOR END OF IMAGE FLAG
C     WARN    BIT # IN SSCAN FOR WARNING MODE FLAG
C     DWELL1  BIT # IN SSCAN FOR DWELL MODE 1 FLAG
C     DWELL2  BIT # IN SSCAN FOR DWELL MODE 2 FLAG
C     DWELL4  BIT # IN SSCAN FOR DWELL MODE 4 FLAG
C     IMCFLG  BIT # IN SSCAN FOR IMC ACTIVE FLAG
C     STPLOC  BIT # IN SSCAN FOR STEP MODE FLAG
C     FLPFLG  BIT # IN SSCAN FOR YAW FLIP ENABLED FLAG
C     TIMSIZ  NUMBER OF BYTES THAT THE TIME OCCUPIES
C     SNSLN   NORTHERN MOST SCAN LINE OF CURRENT SCAN
C     SWFPX   WESTERNMOST PIXEL # OF CURRENT FRAME
C     SEFPX   EASTERNMOST PIXEL # OF CURRENT FRAME
C     SNFLN   NORTHERNMOST SCAN LINE # OF CURRENT FRAME
C     SSFLN   SOUTHERNMOST SCAN LINE # OF CURRENT FRAME
C     NAVLOC  START OF O&A PARAMETERS
C     NAVEND  END OF O&A PARAMETERS

      INTEGER      SSCAN , SGBCT , TSCLS , NEWIMG, ENDIMG, TIMSIZ
      INTEGER      SWFPX , SEFPX , SNFLN , SSFLN , SDSTA , DWELL1
      INTEGER      NAVLOC, DWELL2, DWELL4, SNSLN , WARN  , STPLOC
      INTEGER      NAVEND, IMCFLG, FLPFLG

C LOCATION OF FIELDS WITHIN DOCUMENTATION BLOCK
      PARAMETER (SSCAN  = 31)
      PARAMETER (SDSTA  = 33)
      PARAMETER (SGBCT  = 45)
      PARAMETER (TSCLS  = 67)
      PARAMETER (NEWIMG = 15)
      PARAMETER (ENDIMG = 14)
      PARAMETER (WARN   = 11)
      PARAMETER (STPLOC = 3)
      PARAMETER (DWELL1 = 4)
      PARAMETER (DWELL2 = 5)
      PARAMETER (DWELL4 = 6)
      PARAMETER (IMCFLG = 7)
      PARAMETER (TIMSIZ = 8)
      PARAMETER (FLPFLG = 15)
      PARAMETER (SNSLN  = 185)
      PARAMETER (SWFPX  = 187)
      PARAMETER (SEFPX  = 189)
      PARAMETER (SNFLN  = 191)
      PARAMETER (SSFLN  = 193)
      PARAMETER (NAVLOC = 307)
      PARAMETER (NAVEND = 1718)

C========================= END DIB11DOC ===========================

      DOUBLE PRECISION  TE    , PHI   , PSI   , U     , SINU  , COSU
      DOUBLE PRECISION  SINOI , COSOI , SLAT  , ASC   , SINASC, COSASC
      DOUBLE PRECISION  SYAW  , W     , SW    , CW    , S2W   , C2W
      DOUBLE PRECISION  SW1   , CW1   , SW3   , CW3   , GATT
      DOUBLE PRECISION  SUBLAT, SUBLON, SECS  , WA
      REAL              RPARMS(MXCDSZ)
      DOUBLE PRECISION  IMGTIM, EPOCH , TIMEX , TIME50, R     , B(3,3)
      DOUBLE PRECISION  AEC   , TS    , DR    , LAM   , DLAT  , DYAW
      DOUBLE PRECISION  AEBE2C, AEBE3C, AEBE4C, FERC
      INTEGER      IFUNC , LIT   , ITYPE , IMC   , YEAR  , DAY
      INTEGER      IFTOK , HOUR  , MINUTS, INSTR , IPARMS(MXCDSZ)
      INTEGER      COUNT , OFFSET, LOOP  , IPARM2(MXCDSZ), TIME(2)
      INTEGER      IFLIP
      LOGICAL      BTEST
      CHARACTER*4  CLIT
      CHARACTER*12 CFZ

      EQUIVALENCE(IPARM2,RPARMS)

      COMMON /GVRCOM/ ITYPE , INSTR , SUBLAT, SUBLON, IFLIP
      COMMON /RADCOM/ AEC   , FERC  , AEBE2C, AEBE3C, AEBE4C
      COMMON /SAVCOM/ B     , DR    , PHI

C     INCLUDE 'GVRDAT.INC'
C=========================== DIGVRDAT =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE GVAR NAVIGATION SUBSYSTEM.
C $
C $   DESCRIPTION:
C $      THESE ARE DATA STATEMENTS USED IN THE GVAR NAVIGATION
C $
C $$  DIGVRDAT = INCLUDE, NAVIGATION, GVAR

C DEFINITIONS OF PARAMETERS
C RELLST   : TWO DIMENSIONAL ARRAY OF LOCATION OF REALS IN O&A SET
C INTLST   : ARRAY OF LOCATION OF INTEGERS IN O&A SET

      INTEGER      I     , J     , RELLST(40,2), INTLST(55)

      DATA ((RELLST(I,J),J=1,2),I=1,31) / 5,11,14,64,66,95,99,101,104,
     &        106,109,111,114,116,117,119,121,150,154,156,159,161,164,
     &        166,169,171,172,174,176,205,209,211,214,216,219,221,224,
     &        226,227,229,231,260,264,266,269,271,274,276,279,284,286,
     &        315,319,321,324,326,329,331,334,336,-1,-1 /

      DATA (INTLST(I),I=1,55) / 1,2,12,13,65,96,97,98,102,103,107,108,
     &    112,113,120,151,152,153,157,158,162,163,167,168,175,206,207,
     &    208,212,213,217,218,222,223,230,261,262,263,267,268,272,273,
     &    277,278,285,316,317,318,322,323,327,328,332,333,-1 /

C========================= END DIGVRDAT ===========================

C--------------------------- NVXGVR ------------------------------

C INITIALIZE THE EARTH RADIUS CONSTANTS
      AEC    = AE
      FERC   = FER
      AEBE2C = DBLE(AEBE2)
      AEBE3C = DBLE(AEBE3)
      AEBE4C = DBLE(AEBE4)

C IFUNC = 1
      IF (IFUNC.EQ.1) THEN
        IF (IPARMS(STTYPE).NE.LIT('GVAR')) THEN
          NVXINI = -1
          RETURN
        ENDIF
        ITYPE = 1

C COPY CODICIL SO WE CAN EQUIVALENCE IT TO REAL ARRAY
        DO 1 LOOP = 1, MXCDSZ
 1        IPARM2(LOOP) = IPARMS(LOOP)

C SCALE DOWN REAL CODICIL ELEMENTS
        COUNT = 1
        RPARMS(IMGTM) = REAL(IPARM2(IMGTM))/1000.
 2      IF (RELLST(COUNT,1).EQ.-1) GOTO 4
          OFFSET = 1
          IF (RELLST(COUNT,1).GT.CUTOF1) OFFSET = 13
          IF (RELLST(COUNT,1).GT.CUTOF2) OFFSET = 31
          DO 3 LOOP=RELLST(COUNT,1),RELLST(COUNT,2)
            IF (LOOP.EQ.14.OR.LOOP.EQ.61.OR.(MOD(LOOP-8,55).EQ.0.AND.
     &                                               LOOP.NE.8)) THEN
              RPARMS(LOOP+OFFSET) = REAL(IPARM2(LOOP+OFFSET))/100.
            ELSE
              RPARMS(LOOP+OFFSET) = REAL(IPARM2(LOOP+OFFSET))/10000000.
            ENDIF
 3        CONTINUE
          COUNT = COUNT + 1
        GOTO 2

C SEE IF THIS CODICIL IS FOR IMAGER OR SOUNDER
 4      INSTR = IPARMS(IMGSND)

C INITIALIZE CONSTANTS IN COMMON INSTCO
        CALL SETCON(INSTR, IPARMS(IOFNC), IPARMS(IOFNI), IPARMS(IOFEC),
     &                                                  IPARMS(IOFEI))

C GET CONTROL INFO FROM CODICIL
        YEAR    = 1900 + IPARMS(IMGDAY) / 1000
        DAY     = IPARMS(IMGDAY) - IPARMS(IMGDAY) / 1000 * 1000
        HOUR    = RPARMS(IMGTM) / 10000
        MINUTS  = RPARMS(IMGTM) / 100 - HOUR * 100
        SECS    = RPARMS(IMGTM) - REAL(100*MINUTS) - REAL(10000*HOUR)
        IMGTIM  = TIMEX(YEAR, DAY, HOUR, MINUTS, SECS)
        TIME(1) = IFTOK(CFZ(IPARMS(ETIME)))
        TIME(2) = IFTOK(CFZ(IPARMS(ETIME+1)))
        EPOCH   = TIME50(TIME)
C IMC = 1 means IMC is off
C IFLIP = 1 means Normal
C IFLIP = -1 means inverted
        IMC     = 1
        IFLIP   = 1
        IF (BTEST(IPARMS(IMCACT),IMCFLG)) IMC = 0
        IF (BTEST(IPARMS(IYFLIP),FLPFLG)) IFLIP = -1
        CALL DDEST('IFLIP is set to',IFLIP)
        IF (IFLIP.eq.-1) CALL DDEST('USING FLIPPED NAV',0)

C ASSIGN REFERENCE VALUES TO THE SUBSATELLITE LONGITUDE AND
C LATITUDE, THE RADIAL DISTANCE AND THE ORBIT YAW.
        LAM = RPARMS(REFLON)
        DR  = RPARMS(REFDIS)
        PHI = RPARMS(REFLAT)
        PSI = RPARMS(REFYAW)

C ASSIGN REFERENCE VALUES TO THE ATTITUDES AND MISALIGNMENTS
        ROLL  = RPARMS(RATROL)
        PITCH = RPARMS(RATPTC)
        YAW   = RPARMS(RATYAW)
        RMA   = 0.
        PMA   = 0.

C IF IMC IS OFF, COMPUTE CHANGES IN THE SATELLITE ORBIT
        IF (IMC.NE.0) THEN

C SET REFERENCE RADIAL DISTANCE, LATITUDE AND ORBIT YAW TO ZERO
          DR  = 0.
          PHI = 0.
          PSI = 0.

C COMPUTE TIME SINCE EPOCH (IN MINUTES)
          TS = IMGTIM - EPOCH

C COMPUTES ORBIT ANGLE AND THE RELATED TRIGONOMETRIC FUNKTIONS.
C EARTH ROTATIONAL RATE=.729115E-4 (RAD/S)
          W   = 0.729115D - 4 * 60.0D0 * TS
          SW  = DSIN(W)
          CW  = DCOS(W)
          SW1 = DSIN(0.927*W)
          CW1 = DCOS(0.927*W)
          S2W = DSIN(2.*W)
          C2W = DCOS(2.*W)
          SW3 = DSIN(1.9268*W)
          CW3 = DCOS(1.9268*W)

C COMPUTES CHANGE IN THE IMC LONGITUDE FROM THE REFERENCE
          LAM = LAM + RPARMS(LDR1) + (RPARMS(LDR2) + RPARMS(LDR3)*W) * W
     &        + (RPARMS(LDR10)*SW1 + RPARMS(LDR11)*CW1 + RPARMS(LDR4)*SW
     &        + RPARMS(LDR5)*CW + RPARMS(LDR6)*S2W + RPARMS(LDR7)*C2W
     &        + RPARMS(LDR8)*SW3+RPARMS(LDR9)*CW3 + W*(RPARMS(LDR12)*SW
     &        + RPARMS(LDR13)*CW))*2.

C COMPUTES CHANGE IN RADIAL DISTANCE FROM THE REFERENCE (KM)
          DR = DR + RPARMS(RDDR1) + RPARMS(RDDR2)*CW + RPARMS(RDDR3)*SW
     &          + RPARMS(RDDR4)*C2W + RPARMS(RDDR5)*S2W + RPARMS(RDDR6)
     &          * CW3+RPARMS(RDDR7)*SW3 + RPARMS(RDDR8)*CW1
     &          + RPARMS(RDDR9)*SW1 + W*(RPARMS(RDDR10)*CW
     &          + RPARMS(RDDR11)*SW)

C COMPUTES THE SINE OF THE CHANGE IN THE GEOCENTRIC LATITUDE
          DLAT = RPARMS(DGL1) + RPARMS(DGL2)*CW + RPARMS(DGL3)*SW
     &        + RPARMS(DGL4)*C2W + RPARMS(DGL5)*S2W + W*(RPARMS(DGL6)*CW
     &        + RPARMS(DGL7)*SW) + RPARMS(DGL8)*CW1+RPARMS(DGL9)*SW1

C COMPUTES GEOCENTRIC LATITUDE BY USING AN EXPANSION FOR ARCSINE
          PHI = PHI + DLAT * (1. + DLAT * DLAT / 6.)

C COMPUTES SINE OF THE CHANGE IN THE ORBIT YAW
          DYAW = RPARMS(DOY1) + RPARMS(DOY2)*SW + RPARMS(DOY3)*CW
     &         + RPARMS(DOY4)*S2W + RPARMS(DOY5)*C2W
     &         + W*(RPARMS(DOY6)*SW + RPARMS(DOY7)*CW)
     &         + RPARMS(DOY8)*SW1 + RPARMS(DOY9)*CW1

C COMPUTES THE ORBIT YAW BY USING AN EXPANSION FOR ARCSINE.
          PSI = PSI + DYAW * (1. + DYAW * DYAW / 6.)

C CALCULATION OF CHANGES IN THE SATELLITE ORBIT ENDS HERE
        ENDIF

C CONVERSION OF THE IMC LONGITUDE AND ORBIT YAW TO THE SUBSATELLITE
C LONGITUDE AND THE ORBIT INCLINATION (REF: GOES-PCC-TM-2473, INPUTS
C REQUIRED FOR EARTH LOCATION AND GRIDDING BY SPS, JUNE 6, 1988)
        SLAT  = DSIN(PHI)
        SYAW  = DSIN(PSI)
        SINOI = SLAT**2 + SYAW**2
        COSOI = DSQRT(1.-SINOI)
        SINOI = DSQRT(SINOI)

        IF (SLAT .EQ. 0.0D0 .AND. SYAW .EQ. 0.0D0) THEN
          U = 0.0D0
        ELSE
          U = DATAN2(SLAT,SYAW)
        ENDIF

        SINU  = DSIN(U)
        COSU  = DCOS(U)

C COMPUTES LONGITUDE OF THE ASCENDING NODE
        ASC    = LAM-U
        SINASC = DSIN(ASC)
        COSASC = DCOS(ASC)

C COMPUTES THE SUBSATELLITE GEOGRAPHIC LATITUDE
        SUBLAT = DATAN(AEBE2C*DTAN(PHI))

C COMPUTES THE SUBSATELLITE LONGITUDE
        SUBLON = ASC+DATAN2(COSOI*SINU,COSU)

C COMPUTES THE SPACECRAFT TO EARTH FIXED COORDINATES TRANSFORMATION
C MATRIX:
C     (VECTOR IN ECEF COORDINATES) = B * (VECTOR IN S/C COORDINATES)
        B(1,2) = -SINASC*SINOI
        B(2,2) =  COSASC*SINOI
        B(3,2) = -COSOI
        B(1,3) = -COSASC*COSU+SINASC*SINU*COSOI
        B(2,3) = -SINASC*COSU-COSASC*SINU*COSOI
        B(3,3) = -SLAT
        B(1,1) = -COSASC*SINU-SINASC*COSU*COSOI
        B(2,1) = -SINASC*SINU+COSASC*COSU*COSOI
        B(3,1) =  COSU*SINOI

C COMPUTES THE NORMALIZED SPACECRAFT POSITION VECTOR IN EARTH FIXED
C COORDINATES - XS.
        R     = (NOMORB+DR)/AEC
        XS(1) = -B(1,3)*R
        XS(2) = -B(2,3)*R
        XS(3) = -B(3,3)*R

C PRECOMPUTES Q3 (USED IN LPOINT)
        Q3 = XS(1)**2 + XS(2)**2 + AEBE2C * XS(3)**2 - 1.0

C COMPUTES THE ATTITUDES AND MISALIGNMENTS IF IMC IS OFF
        IF (IMC.NE.0) THEN

C COMPUTES THE SOLAR ORBIT ANGLE
          WA = RPARMS(61)*TS

C COMPUTES THE DIFFERENCE BETWEEN CURRENT TIME, TS, AND THE
C EXPONENTIAL TIME, IPARMS(62). NOTE THAT BOTH TIMES ARE SINCE EPOCH.
          TE = TS - RPARMS(EXPTIM)

C COMPUTES ROLL + ROLL MISALIGNMENT
          ROLL = ROLL + GATT(RAAWDS,RPARMS,IPARMS,WA,TE)

C COMPUTES PITCH + PITCH MISALIGNMENT
          PITCH = PITCH + GATT(PAAWDS,RPARMS,IPARMS,WA,TE)

C COMPUTES YAW
          YAW = YAW + GATT(YAAWDS,RPARMS,IPARMS,WA,TE)

C COMPUTES ROLL MISALIGNMENT
          RMA = GATT(RMAWDS,RPARMS,IPARMS,WA,TE)

C COMPUTES PITCH MISALIGNMENT
          PMA = GATT(PMAWDS,RPARMS,IPARMS,WA,TE)

C APPLY THE EARTH SENSOR COMPENSATION IF NEEDED
          ROLL   = ROLL + RPARMS(IMCROL)
          PITCH  = PITCH + RPARMS(IMCPTC)
          YAW    = YAW + RPARMS(IMCYAW)
        ENDIF

C COMPUTES THE INSTRUMENT TO EARTH FIXED COORDINATES TRANSFORMATION
C MATRIX - BT
        CALL INST2E(ROLL,PITCH,YAW,B,BT)

C IFUNC = 2
      ELSEIF (IFUNC.EQ.2) THEN
        IF (INDEX(CLIT(IPARMS(1)),'LL').NE.0) ITYPE=1
        IF (INDEX(CLIT(IPARMS(1)),'XY').NE.0) ITYPE=2
      ENDIF
      NVXINI=0
      RETURN
      END




      INTEGER FUNCTION NVXSAE(XLIN,XELE,XDUM,XLAT,XLON,Z)

      IMPLICIT NONE

      REAL         XLIN  , XELE  , XDUM  , XLAT  , XLON  , Z
      DOUBLE PRECISION   RL    , RP    , E     , S
      REAL         YLAT  , YLON
      DOUBLE PRECISION   SUBLAT, SUBLON, EVLN  , SCPX  , TMPLAT, TMPLON
      INTEGER      INSTR , ITYPE , STAT, IFLIP

C     INCLUDE 'ELCONS.INC'
C=========================== DIELCONS =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCONS = INCLUDE

      DOUBLE PRECISION PI
           PARAMETER (PI=3.141592653589793D0)
      DOUBLE PRECISION DEG
           PARAMETER (DEG=180.D0/PI)
      DOUBLE PRECISION RAD
           PARAMETER (RAD=PI/180.D0)
C                    DEGREES TO RADIANS CONVERSION PI/180
      DOUBLE PRECISION NOMORB
           PARAMETER (NOMORB=42164.365D0)
C                    NOMINAL RADIAL DISTANCE OF SATELLITE (KM)
      DOUBLE PRECISION AE
           PARAMETER (AE=6378.137D0)
C                    EARTH EQUATORIAL RADIUS (KM)
      DOUBLE PRECISION FER
           PARAMETER (FER=1.D0-(6356.7533D0/AE))
C                    EARTH FLATTENING COEFFICIENT = 1-(BE/AE)
      REAL AEBE2
           PARAMETER (AEBE2=1.D0/(1.D0-FER)**2)
      REAL AEBE3
           PARAMETER (AEBE3=AEBE2-1.)
      REAL AEBE4
           PARAMETER (AEBE4=(1.D0-FER)**4-1.)
C========================= END DIELCONS ===========================
C     INCLUDE 'ELCOMM.INC'
C=========================== DIELCOMM =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCOMM = INCLUDE

C     COMMON VARIABLES
C
      DOUBLE PRECISION XS(3)
C                      NORMALIZED S/C POSITION IN ECEF COORDINATES
      DOUBLE PRECISION BT(3,3)
C                      ECEF TO INSTRUMENT COORDINATES TRANSFORMATION
      DOUBLE PRECISION  Q3
C                      USED IN SUBRTN LPOINT
      DOUBLE PRECISION PITCH,ROLL,YAW
C                          PITCH,ROLL,YAW ANGLES OF INSTRUMENT (RAD)
      REAL PMA,RMA
C                          PITCH,ROLL MISALIGNMENTS OF INSTRUMENT (RAD)
         COMMON /ELCOMM/ XS,BT,Q3,PITCH,ROLL,YAW,PMA,RMA
C========================= END DIELCOMM ===========================
C     INCLUDE 'OASET.INC'
C=========================== DIOASET =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE GVAR NAVIGATION SUBSYSTEM.
C $
C $   DESCRIPTION:
C $      THESE ARE CONSTANTS USED TO DESCRIBE THE GVAR O&A SET STRUCTURE
C $
C $$  DIOASET = INCLUDE, NAVIGATION, GVAR

C DEFINITIONS OF PARAMETERS
C OASIZE   : SIZE OF GVAR ORBIT AND ATTITUDE SET
C PCOEFS   : START OF PITCH COEFFICIENTS
C RMACFS   : START OF RMA COEFFICIENTS
C CUTOF1   : FIRST DIVIDING POINT IN O&A SET (WHERE DIVIDED INTO 128
C            WORD SETS)
C CUTOF2   : SECOND DIVIDING POINT IN O&A SET (WHERE DIVIDED INTO 128
C            WORD SETS)

      INTEGER      OASIZE, PCOEFS, RMACFS, CUTOF1, CUTOF2

      PARAMETER (OASIZE = 336)
      PARAMETER (PCOEFS = 117)
      PARAMETER (RMACFS = 227)
      PARAMETER (CUTOF1 = 116)
      PARAMETER (CUTOF2 = 226)

C========================= END DIOASET ===========================
C     INCLUDE 'INSTCO.INC'
C=========================== DIINSTCO =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIINSTCO = INCLUDE

      INTEGER INCMAX(2)
C                       NUMBER OF INCREMENTS PER CYCLE
      REAL ELVMAX(2)
C                       BOUNDS IN ELEVATION (RADIANS)
      REAL SCNMAX(2)
C                       BOUNDS IN SCAN ANGLE (RADIANS)
      REAL ELVINC(2)
C                       CHANGE IN ELEVATION ANGLE PER INCREMENT (RAD)
      REAL SCNINC(2)
C                       CHANGE IN SCAN ANGLE PER INCREMENT (RADIANS)
      REAL ELVLN(2)
C                       ELEVATION ANGLE PER DETECTOR LINE (RADIANS)
      REAL SCNPX(2)
C                       SCAN ANGLE PER PIXEL (RADIANS)
      REAL EWNOM(2)
C                       EW CENTER OF INSTRUMENT
      REAL NSNOM(2)
C                       NS CENTER OF INSTRUMENT


      COMMON /INSTCO/ INCMAX,ELVMAX,SCNMAX,
     &   ELVINC,SCNINC,ELVLN,SCNPX,EWNOM,NSNOM
C========================= END DIINSTCO ===========================

      COMMON /GVRCOM/ ITYPE, INSTR , SUBLAT, SUBLON, IFLIP

C--------------------------------------------------------------

C TRANSFORM LINE/PIXEL TO GEOGRAPHIC COORDINATES:
C SET INPUT LINE/PIXEL NUMBERS
      RL = XLIN
      RP = XELE

C IF DOING SOUNDER NAV, HAVE TO TRICK ROUTINES INTO THINKING IMAGE IS
C AT RES 1, BECAUSE NAV ROUTINES TAKE SOUNDER RES INTO ACCOUNT
      IF (INSTR.EQ.2) THEN
        RL = (RL+9.)/10.
        RP = (RP+9.)/10.
      ENDIF

C COMPUTE ELEVATION AND SCAN ANGLES (E,S) RELATED TO INPUT
C LINE AND PIXEL NUMBERS
      E = EVLN(INSTR,RL)
      S = SCPX(INSTR,RP)

C TRANSFORM ELEVATION AND SCAN ANGLES TO GEOGRAPHIC COORDINATES
      CALL LPOINT(INSTR,IFLIP,E,S,TMPLAT,TMPLON,STAT)
      IF (STAT.NE.0) GOTO 900
      TMPLAT = TMPLAT * DEG
      TMPLON = TMPLON * DEG

C PUT LONGITUDE INTO MCIDAS FORM
      TMPLON = -TMPLON

C SEE IF WE HAVE TO CONVERT TO X Y Z COORDINATES
      IF (ITYPE.EQ.2) THEN
        YLAT = TMPLAT
        YLON = TMPLON
        CALL LLCART(YLAT,YLON,XLAT,XLON,Z)
      ELSE
	XLAT = TMPLAT
	XLON = TMPLON
      ENDIF

      NVXSAE=0
      RETURN

 900  CONTINUE
      XLAT = TMPLAT
      XLON = -TMPLON
      NVXSAE=-1
      RETURN
      END




      INTEGER FUNCTION NVXEAS(ZLAT,ZLON,Z,XLIN,XELE,XDUM)

      IMPLICIT NONE

      REAL         ZLAT  , ZLON  , Z     , XLIN  , XELE  , XDUM
      REAL         X     , Y
      DOUBLE PRECISION TMPLIN, TMPELE, E     , S     , TMPLAT, TMPLON
      DOUBLE PRECISION SUBLAT, SUBLON
      INTEGER      INSTR , ITYPE , IER, IFLIP

C     INCLUDE 'ELCONS.INC'
C=========================== DIELCONS =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCONS = INCLUDE

      DOUBLE PRECISION PI
           PARAMETER (PI=3.141592653589793D0)
      DOUBLE PRECISION DEG
           PARAMETER (DEG=180.D0/PI)
      DOUBLE PRECISION RAD
           PARAMETER (RAD=PI/180.D0)
C                    DEGREES TO RADIANS CONVERSION PI/180
      DOUBLE PRECISION NOMORB
           PARAMETER (NOMORB=42164.365D0)
C                    NOMINAL RADIAL DISTANCE OF SATELLITE (KM)
      DOUBLE PRECISION AE
           PARAMETER (AE=6378.137D0)
C                    EARTH EQUATORIAL RADIUS (KM)
      DOUBLE PRECISION FER
           PARAMETER (FER=1.D0-(6356.7533D0/AE))
C                    EARTH FLATTENING COEFFICIENT = 1-(BE/AE)
      REAL AEBE2
           PARAMETER (AEBE2=1.D0/(1.D0-FER)**2)
      REAL AEBE3
           PARAMETER (AEBE3=AEBE2-1.)
      REAL AEBE4
           PARAMETER (AEBE4=(1.D0-FER)**4-1.)
C========================= END DIELCONS ===========================
C     INCLUDE 'ELCOMM.INC'
C=========================== DIELCOMM =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCOMM = INCLUDE

C     COMMON VARIABLES
C
      DOUBLE PRECISION XS(3)
C                      NORMALIZED S/C POSITION IN ECEF COORDINATES
      DOUBLE PRECISION BT(3,3)
C                      ECEF TO INSTRUMENT COORDINATES TRANSFORMATION
      DOUBLE PRECISION  Q3
C                      USED IN SUBRTN LPOINT
      DOUBLE PRECISION PITCH,ROLL,YAW
C                          PITCH,ROLL,YAW ANGLES OF INSTRUMENT (RAD)
      REAL PMA,RMA
C                          PITCH,ROLL MISALIGNMENTS OF INSTRUMENT (RAD)
         COMMON /ELCOMM/ XS,BT,Q3,PITCH,ROLL,YAW,PMA,RMA
C========================= END DIELCOMM ===========================
C     INCLUDE 'OASET.INC'
C=========================== DIOASET =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE GVAR NAVIGATION SUBSYSTEM.
C $
C $   DESCRIPTION:
C $      THESE ARE CONSTANTS USED TO DESCRIBE THE GVAR O&A SET STRUCTURE
C $
C $$  DIOASET = INCLUDE, NAVIGATION, GVAR

C DEFINITIONS OF PARAMETERS
C OASIZE   : SIZE OF GVAR ORBIT AND ATTITUDE SET
C PCOEFS   : START OF PITCH COEFFICIENTS
C RMACFS   : START OF RMA COEFFICIENTS
C CUTOF1   : FIRST DIVIDING POINT IN O&A SET (WHERE DIVIDED INTO 128
C            WORD SETS)
C CUTOF2   : SECOND DIVIDING POINT IN O&A SET (WHERE DIVIDED INTO 128
C            WORD SETS)

      INTEGER      OASIZE, PCOEFS, RMACFS, CUTOF1, CUTOF2

      PARAMETER (OASIZE = 336)
      PARAMETER (PCOEFS = 117)
      PARAMETER (RMACFS = 227)
      PARAMETER (CUTOF1 = 116)
      PARAMETER (CUTOF2 = 226)

C========================= END DIOASET ===========================
C     INCLUDE 'INSTCO.INC'
C=========================== DIINSTCO =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIINSTCO = INCLUDE

      INTEGER INCMAX(2)
C                       NUMBER OF INCREMENTS PER CYCLE
      REAL ELVMAX(2)
C                       BOUNDS IN ELEVATION (RADIANS)
      REAL SCNMAX(2)
C                       BOUNDS IN SCAN ANGLE (RADIANS)
      REAL ELVINC(2)
C                       CHANGE IN ELEVATION ANGLE PER INCREMENT (RAD)
      REAL SCNINC(2)
C                       CHANGE IN SCAN ANGLE PER INCREMENT (RADIANS)
      REAL ELVLN(2)
C                       ELEVATION ANGLE PER DETECTOR LINE (RADIANS)
      REAL SCNPX(2)
C                       SCAN ANGLE PER PIXEL (RADIANS)
      REAL EWNOM(2)
C                       EW CENTER OF INSTRUMENT
      REAL NSNOM(2)
C                       NS CENTER OF INSTRUMENT


      COMMON /INSTCO/ INCMAX,ELVMAX,SCNMAX,
     &   ELVINC,SCNINC,ELVLN,SCNPX,EWNOM,NSNOM
C========================= END DIINSTCO ===========================

      COMMON /GVRCOM/ ITYPE, INSTR, SUBLAT, SUBLON, IFLIP

C--------------------------------------------------------------

      NVXEAS = 0

C IF IN CARTESIAN COORDS, TRANSFORM TO LAT/LON
      IF (ITYPE.EQ.2) THEN
        X = ZLAT
        Y = ZLON
        CALL CARTLL(X,Y,Z,ZLAT,ZLON)
      ENDIF

      IF (ABS(ZLAT).GT.90.) THEN
        NVXEAS = -1
        RETURN
      ENDIF

C ELUG ROUTINES USE DOUBLE PRECISION VARS; USE TEMP VARIABLES
      TMPLAT = ZLAT
      TMPLON = ZLON

C TRANSFORM LAT/LON TO ELEVATION AND SCAN ANGLES
      CALL GPOINT(INSTR,IFLIP,TMPLAT*RAD,-TMPLON*RAD,E,S,IER)

C SEE IF THE LAT/LON GIVEN IS ABLE TO BE SEEN
      IF (IER.NE.0) THEN
        NVXEAS = -1
        RETURN
      ENDIF

C CONVERT ELEVATION AND SCAN ANGLES TO LINE/PIXEL COORDINATES
      CALL EVSC2L(INSTR,E,S,TMPLIN,TMPELE)

C CONVERT INTERNAL 8 BYTE VALUES TO 4 BYTES
      XLIN = TMPLIN
      XELE = TMPELE

C IF DOING SOUNDER NAV, CHANGE LIN & ELE RETURNED TO RES 10 VALUES
      IF (INSTR.EQ.2) THEN
        XLIN = XLIN*10.-9.
        XELE = XELE*10.-9.
      ENDIF

      RETURN
      END




      INTEGER FUNCTION NVXOPT(IFUNC,XIN,XOUT)

      IMPLICIT NONE

C     INCLUDE 'ELCONS.INC'
C=========================== DIELCONS =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCONS = INCLUDE

      DOUBLE PRECISION PI
           PARAMETER (PI=3.141592653589793D0)
      DOUBLE PRECISION DEG
           PARAMETER (DEG=180.D0/PI)
      DOUBLE PRECISION RAD
           PARAMETER (RAD=PI/180.D0)
C                    DEGREES TO RADIANS CONVERSION PI/180
      DOUBLE PRECISION NOMORB
           PARAMETER (NOMORB=42164.365D0)
C                    NOMINAL RADIAL DISTANCE OF SATELLITE (KM)
      DOUBLE PRECISION AE
           PARAMETER (AE=6378.137D0)
C                    EARTH EQUATORIAL RADIUS (KM)
      DOUBLE PRECISION FER
           PARAMETER (FER=1.D0-(6356.7533D0/AE))
C                    EARTH FLATTENING COEFFICIENT = 1-(BE/AE)
      REAL AEBE2
           PARAMETER (AEBE2=1.D0/(1.D0-FER)**2)
      REAL AEBE3
           PARAMETER (AEBE3=AEBE2-1.)
      REAL AEBE4
           PARAMETER (AEBE4=(1.D0-FER)**4-1.)
C========================= END DIELCONS ===========================
C     INCLUDE 'ELCOMM.INC'
C=========================== DIELCOMM =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCOMM = INCLUDE

C     COMMON VARIABLES
C
      DOUBLE PRECISION XS(3)
C                      NORMALIZED S/C POSITION IN ECEF COORDINATES
      DOUBLE PRECISION BT(3,3)
C                      ECEF TO INSTRUMENT COORDINATES TRANSFORMATION
      DOUBLE PRECISION  Q3
C                      USED IN SUBRTN LPOINT
      DOUBLE PRECISION PITCH,ROLL,YAW
C                          PITCH,ROLL,YAW ANGLES OF INSTRUMENT (RAD)
      REAL PMA,RMA
C                          PITCH,ROLL MISALIGNMENTS OF INSTRUMENT (RAD)
         COMMON /ELCOMM/ XS,BT,Q3,PITCH,ROLL,YAW,PMA,RMA
C========================= END DIELCOMM ===========================

      INTEGER      IFUNC , LIT   , ITYPE , INSTR , JDAY  , JTIME
      INTEGER      IROUND, M0ITIME, LASDAY, LASTIM, IFLIP
      REAL         FLAT  , FLON  , GHA   , XIN(*)
      REAL         DEC   , XLAT  , XLON  , XOUT(*)
      DOUBLE PRECISION AEC , FERC  , AEBE2C, AEBE3C, AEBE4C, B(3,3)
      DOUBLE PRECISION SUBLAT, SUBLON, R     , DR    , PHI

      COMMON /GVRCOM/ ITYPE , INSTR , SUBLAT, SUBLON, IFLIP
      COMMON /RADCOM/ AEC   , FERC  , AEBE2C, AEBE3C, AEBE4C
      COMMON /SAVCOM/ B     , DR    , PHI

      DATA LASDAY/-1/,LASTIM/-1/

C-----------------------------------------------------------------

      NVXOPT = -1

      IF (IFUNC.EQ.LIT('SPOS')) THEN
        XOUT(1) = SUBLAT * DEG
        XOUT(2) = -SUBLON * DEG
        XOUT(2) = AMOD(XOUT(2),360.)
        NVXOPT = 0

      ELSEIF (IFUNC.EQ.LIT('HGT ')) THEN
        AEC    = AE + DBLE(XIN(1))
        FERC   = 1.D0 - ((6356.7533D0 + DBLE(XIN(1))) / AEC)
        AEBE2C = 1.D0 / ((1.D0 - FERC)*(1.D0 - FERC))
        AEBE3C = AEBE2C - 1.D0
        AEBE4C = (1.D0-FERC)*(1.D0-FERC)*(1.D0-FERC)*(1.D0-FERC) - 1.D0

C RECOMPUTE VALUES THAT DEPEND ON EARTH RADIUS
        SUBLAT = DATAN(AEBE2C*DTAN(PHI))
        R      = (NOMORB+DR)/AEC
        XS(1)  = -B(1,3)*R
        XS(2)  = -B(2,3)*R
        XS(3)  = -B(3,3)*R
        Q3     = XS(1)**2 + XS(2)**2 + AEBE2C * XS(3)**2 - 1.0
        NVXOPT = 0

      ELSEIF (IFUNC.EQ.LIT('ANG ')) THEN
        JDAY  = IROUND(XIN(1))
        JTIME = M0ITIME(XIN(2))
        FLAT  = XIN(3)
        FLON  = XIN(4)
        IF (JDAY.NE.LASDAY.OR.JTIME.NE.LASTIM) THEN
          CALL SOLARP(JDAY,JTIME,GHA,DEC,XLAT,XLON)
          LASDAY = JDAY
          LASTIM = JTIME
        ENDIF
        CALL GVRANG(JDAY, JTIME, FLAT, FLON, GHA, DEC, XOUT(1), XOUT(2),
     &                                                          XOUT(3))
        NVXOPT = 0
      ENDIF

      RETURN
      END





C THE FOLLOWING ARE SUBSIDIARY ROUTINES


      SUBROUTINE SETCON(INSTR, NADNSC, NADNSI, NADEWC, NADEWI)

      IMPLICIT NONE

      INTEGER INSTR, NADNSC, NADNSI, NADEWC, NADEWI
      character*12 cfg

C     INCLUDE 'ELCONS.INC'
C=========================== DIELCONS =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCONS = INCLUDE

      DOUBLE PRECISION PI
           PARAMETER (PI=3.141592653589793D0)
      DOUBLE PRECISION DEG
           PARAMETER (DEG=180.D0/PI)
      DOUBLE PRECISION RAD
           PARAMETER (RAD=PI/180.D0)
C                    DEGREES TO RADIANS CONVERSION PI/180
      DOUBLE PRECISION NOMORB
           PARAMETER (NOMORB=42164.365D0)
C                    NOMINAL RADIAL DISTANCE OF SATELLITE (KM)
      DOUBLE PRECISION AE
           PARAMETER (AE=6378.137D0)
C                    EARTH EQUATORIAL RADIUS (KM)
      DOUBLE PRECISION FER
           PARAMETER (FER=1.D0-(6356.7533D0/AE))
C                    EARTH FLATTENING COEFFICIENT = 1-(BE/AE)
      REAL AEBE2
           PARAMETER (AEBE2=1.D0/(1.D0-FER)**2)
      REAL AEBE3
           PARAMETER (AEBE3=AEBE2-1.)
      REAL AEBE4
           PARAMETER (AEBE4=(1.D0-FER)**4-1.)
C========================= END DIELCONS ===========================
C     INCLUDE 'INSTCO.INC'
C=========================== DIINSTCO =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIINSTCO = INCLUDE

      INTEGER INCMAX(2)
C                       NUMBER OF INCREMENTS PER CYCLE
      REAL ELVMAX(2)
C                       BOUNDS IN ELEVATION (RADIANS)
      REAL SCNMAX(2)
C                       BOUNDS IN SCAN ANGLE (RADIANS)
      REAL ELVINC(2)
C                       CHANGE IN ELEVATION ANGLE PER INCREMENT (RAD)
      REAL SCNINC(2)
C                       CHANGE IN SCAN ANGLE PER INCREMENT (RADIANS)
      REAL ELVLN(2)
C                       ELEVATION ANGLE PER DETECTOR LINE (RADIANS)
      REAL SCNPX(2)
C                       SCAN ANGLE PER PIXEL (RADIANS)
      REAL EWNOM(2)
C                       EW CENTER OF INSTRUMENT
      REAL NSNOM(2)
C                       NS CENTER OF INSTRUMENT

      COMMON /INSTCO/ INCMAX,ELVMAX,SCNMAX,
     &   ELVINC,SCNINC,ELVLN,SCNPX,EWNOM,NSNOM
C========================= END DIINSTCO ===========================

      INCMAX(1)  = 6136
      INCMAX(2)  = 2805
      ELVINC(1)  = 8.E-6
      ELVINC(2)  = 17.5E-6
      SCNINC(1)  = 16.E-6
      SCNINC(2)  = 35.E-6
      ELVLN(1)   = 28.E-6
      ELVLN(2)   = 280.E-6
      SCNPX(1)   = 16.E-6
      SCNPX(2)   = 280.E-6
      ELVMAX(1)  = 0.220896
      ELVMAX(2)  = 0.22089375
      SCNMAX(1)  = 0.24544
      SCNMAX(2)  = 0.2454375
      NSNOM(1)   = 4.5*INCMAX(1)*ELVINC(1)
      NSNOM(2)   = 4.5*INCMAX(2)*ELVINC(2)
      EWNOM(1)   = 2.5*INCMAX(1)*SCNINC(1)
      EWNOM(2)   = 2.5*INCMAX(2)*SCNINC(2)


C new code because of change to elug; nadir position is available
C in the signal, so should compute 4 values above using them
C instead of having them hardwired
C     call ddest('nadnsc: ', nadnsc)
C     call ddest('nadnsi: ', nadnsi)
C     call ddest('nadewc: ', nadewc)
C     call ddest('nadewi: ', nadewi)
c
c--- new code from Kathy Kelly for sounder nav - 10/27
c
      if (nadnsc .ne. 0 .and. nadnsi .ne. 0 .and. nadewc .ne. 0
     &                                 .and. nadewi .ne. 0) then
	IF (INSTR .EQ. 1) THEN

           ELVMAX(INSTR) = (NADNSC*INCMAX(INSTR)+NADNSI)
     &                                             *ELVINC(INSTR)

        ELSE

           ELVMAX(INSTR) = ((9-NADNSC)*INCMAX(INSTR)-NADNSI)
     &                                             *ELVINC(INSTR)

	ENDIF

        SCNMAX(INSTR) = (NADEWC*INCMAX(INSTR)+NADEWI)
     &                                            *SCNINC(INSTR)
      endif
c
c--- end of new code from Kathy Kelly for sounder nav - 10/27
c

C     call ddest('elvmax(1): '//cfg(elvmax(1)), 0)
C     call ddest('elvmax(2): '//cfg(elvmax(2)), 0)
C     call ddest('scnmax(1): '//cfg(scnmax(1)), 0)
C     call ddest('scnmax(2): '//cfg(scnmax(2)), 0)

      RETURN
      END



      FUNCTION TIMEX(NY,ND,NH,NM,S)

      IMPLICIT NONE

      INTEGER      ND    , NH    , NM    , J     , NY
      DOUBLE PRECISION       TIMEX , S

C-----------------------------------------------------------------------

      J = ND + 1461 * (NY + 4799) / 4 - 3 * ((NY + 4899) / 100) / 4
     &                                                        - 2465022

C COMPUTE ACTUAL TIME IN MINUTES FROM JANUARY 1.0, 1950
      TIMEX = J * 1440.D0 + NH * 60.D0 + NM + S / 60.D0

      RETURN
      END



      FUNCTION TIME50(I)

      IMPLICIT NONE

      INTEGER      NY    , ND    , NH    , NM    , J     , I(2)
      INTEGER      IAA   , IAB   , NBC   , IAC   , DEF
      DOUBLE PRECISION       TIME50, S

C-----------------------------------------------------------------

      NY  = I(1) / 10000
      IAA = I(1) - (NY*10000)

      ND  = (I(1) - (NY*10000)) * .1
      IAB = (IAA - (ND * 10)) * 10
      NBC = I(2) / 10000000.
      IAC = I(2) - (NBC * 10000000)
      NH  = IAB + NBC
      DEF = I(2) - IAC
      NM  = IAC * .00001
      S   = (I(2) - (DEF + (NM * 100000))) * .001

C HERE WE CONVERT INTEGER YEAR AND DAY OF YEAR TO NUMBER OF
C DAYS FROM 0 HOUR UT, 1950 JAN. 1.0
C THIS CONVERTION IS BASED ON AN ALGORITHM BY FLIEGEL AND VAN
C FLANDERN, COMM. OF ACM, VOL.11, NO. 10, OCT. 1968 (P.657)

      J = ND + 1461 * (NY + 4799) / 4 - 3 * ((NY + 4899) / 100) / 4
     &                                                       - 2465022

C COMPUTE TIME IN MINUTES FROM JANUARY 1.0, 1950
      TIME50 = J * 1440.D0 + NH * 60.D0 + NM + S / 60.D0

      RETURN
      END




      DOUBLE PRECISION FUNCTION GATT(K0,RPARMS,IPARMS,WA,TE)

      IMPLICIT NONE

C     INCLUDE 'MXCDSZ.INC'
C=========================== DIMXCDSZ =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE NAVIGATION SUBSYSTEM
C $
C $   DESCRIPTION:
C $      THIS IS THE VALUE OF LARGEST NAVIGATION CODICIL SIZE ALLOWED
C $
C $$  DIMXCDSZ = INCLUDE, NAVIGATION

C DEFINITIONS OF PARAMETERS
C MXCDSZ   : LARGEST ALLOWED CODICIL SIZE

      INTEGER      MXCDSZ

      PARAMETER (MXCDSZ = 5*128)

C========================= END DIMXCDSZ ===========================

C CALLING PARAMETERS
      INTEGER K0
C STARTING POSITION OF A PARAMETER SUBSET IN THE REAL O&A SET
      REAL RPARMS(MXCDSZ)
C INPUT O&A PARAMETER SET
      INTEGER IPARMS(MXCDSZ)
C INPUT O&A PARAMETER SET
      DOUBLE PRECISION WA
C INPUT SOLAR ORBIT ANGLE IN RADIANS
      DOUBLE PRECISION TE
C INPUT EXPONENTIAL TIME DELAY FROM EPOCH (MINUTES)

C LOCAL VARIABLES
      INTEGER      KKK   , I     , J     , M     , L     , LL    , K
      DOUBLE PRECISION       IR    , JR    , MR    , ATT

C------------------------------------------------------------------

C CONSTANT COMPONENT
      K   = K0
      ATT = RPARMS(K+2)

C COMPUTES THE EXPONENTIAL TERM
      IF (TE.GE.0) ATT = ATT + RPARMS(K) * DEXP(-TE / RPARMS(K+1))

C EXTRACTS THE NUMBER OF SINUSOIDS
      IR = REAL(IPARMS(K+3))
      I  = NINT(IR)

C CALCULATION OF SINUSOIDS
      DO 10 L=1,I
        ATT = ATT + RPARMS(K+2*L+2) * DCOS(WA*L+RPARMS(K+2*L+3))
 10   CONTINUE

C POINTER TO THE NUMBER OF MONOMIAL SINUSOIDS
      K = K + 34

C EXTACTS NUMBER OF MONOMIAL SINUSOIDS
      IR  = REAL(IPARMS(K))
      KKK = IPARMS(K)

C COMPUTES MONOMIAL SINUSOIDS
      DO 20 L=1,KKK
        LL = K + 5 * L

C ORDER OF SINUSOID
        JR = REAL(IPARMS(LL-4))

C ORDER OF MONOMIAL SINUSOID
        MR  = REAL(IPARMS(LL-3))
        J   = NINT(JR)
        M   = NINT(MR)
        ATT = ATT + RPARMS(LL-2) * ((WA - RPARMS(LL))**MR)
     &                                      * DCOS(JR*WA+RPARMS(LL-1))
 20   CONTINUE

      GATT = ATT
      RETURN
      END




      SUBROUTINE EVSC2L(INSTR,ELEV,SCAN,RL,RP)

      IMPLICIT NONE

C CALLING PARAMETERS
      INTEGER INSTR
C INSTRUMENT CODE (1-IMAGER, 2-SOUNDER)
      DOUBLE PRECISION ELEV
C ELEVATION ANGLE IN RADIANS
      DOUBLE PRECISION SCAN
C SCAN ANGLE IN RADIANS
      DOUBLE PRECISION RL
C LINE NUMBER
      DOUBLE PRECISION RP
C PIXEL NUMBER

C     INCLUDE 'INSTCO.INC'
C=========================== DIINSTCO =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIINSTCO = INCLUDE

      INTEGER INCMAX(2)
C                       NUMBER OF INCREMENTS PER CYCLE
      REAL ELVMAX(2)
C                       BOUNDS IN ELEVATION (RADIANS)
      REAL SCNMAX(2)
C                       BOUNDS IN SCAN ANGLE (RADIANS)
      REAL ELVINC(2)
C                       CHANGE IN ELEVATION ANGLE PER INCREMENT (RAD)
      REAL SCNINC(2)
C                       CHANGE IN SCAN ANGLE PER INCREMENT (RADIANS)
      REAL ELVLN(2)
C                       ELEVATION ANGLE PER DETECTOR LINE (RADIANS)
      REAL SCNPX(2)
C                       SCAN ANGLE PER PIXEL (RADIANS)
      REAL EWNOM(2)
C                       EW CENTER OF INSTRUMENT
      REAL NSNOM(2)
C                       NS CENTER OF INSTRUMENT


      COMMON /INSTCO/ INCMAX,ELVMAX,SCNMAX,
     &   ELVINC,SCNINC,ELVLN,SCNPX,EWNOM,NSNOM
C========================= END DIINSTCO ===========================

C--------------------------------------------------------------

C COMPUTE FRACTIONAL LINE NUMBER
      RL = (ELVMAX(INSTR) - ELEV) / ELVLN(INSTR)
      IF (INSTR.EQ.1) THEN
        RL = RL + 4.5
      ELSE
        RL = RL + 2.5
      ENDIF

C COMPUTE FRACTIONAL PIXEL NUMBER
      RP = (SCNMAX(INSTR) + SCAN) / SCNPX(INSTR) + 1.

      RETURN
      END



      DOUBLE PRECISION FUNCTION EVLN(INSTR,RLINE)

      IMPLICIT NONE

C CALLING PARAMETERS
      INTEGER INSTR
C INSTRUMENT CODE (1-IMAGER, 2-SOUNDER)
      DOUBLE PRECISION  RLINE
C FRACTIONAL LINE  NUMBER

C     INCLUDE 'INSTCO.INC'
C=========================== DIINSTCO =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIINSTCO = INCLUDE

      INTEGER INCMAX(2)
C                       NUMBER OF INCREMENTS PER CYCLE
      REAL ELVMAX(2)
C                       BOUNDS IN ELEVATION (RADIANS)
      REAL SCNMAX(2)
C                       BOUNDS IN SCAN ANGLE (RADIANS)
      REAL ELVINC(2)
C                       CHANGE IN ELEVATION ANGLE PER INCREMENT (RAD)
      REAL SCNINC(2)
C                       CHANGE IN SCAN ANGLE PER INCREMENT (RADIANS)
      REAL ELVLN(2)
C                       ELEVATION ANGLE PER DETECTOR LINE (RADIANS)
      REAL SCNPX(2)
C                       SCAN ANGLE PER PIXEL (RADIANS)
      REAL EWNOM(2)
C                       EW CENTER OF INSTRUMENT
      REAL NSNOM(2)
C                       NS CENTER OF INSTRUMENT


      COMMON /INSTCO/ INCMAX,ELVMAX,SCNMAX,
     &   ELVINC,SCNINC,ELVLN,SCNPX,EWNOM,NSNOM
C========================= END DIINSTCO ===========================

C----------------------------------------------------------------

      IF (INSTR.EQ.1) THEN
        EVLN = ELVMAX(INSTR) - (RLINE - 4.5) * ELVLN(INSTR)
      ELSE
        EVLN = ELVMAX(INSTR) - (RLINE - 2.5) * ELVLN(INSTR)
      ENDIF

      RETURN
      END



      DOUBLE PRECISION FUNCTION SCPX(INSTR,PIX)

      IMPLICIT NONE

C CALLING PARAMETERS
      INTEGER INSTR
C INSTRUMENT CODE (1-IMAGER, 2-SOUNDER)
      DOUBLE PRECISION PIX
C FRACTIONAL PIXEL NUMBER

C     INCLUDE 'INSTCO.INC'
C=========================== DIINSTCO =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIINSTCO = INCLUDE

      INTEGER INCMAX(2)
C                       NUMBER OF INCREMENTS PER CYCLE
      REAL ELVMAX(2)
C                       BOUNDS IN ELEVATION (RADIANS)
      REAL SCNMAX(2)
C                       BOUNDS IN SCAN ANGLE (RADIANS)
      REAL ELVINC(2)
C                       CHANGE IN ELEVATION ANGLE PER INCREMENT (RAD)
      REAL SCNINC(2)
C                       CHANGE IN SCAN ANGLE PER INCREMENT (RADIANS)
      REAL ELVLN(2)
C                       ELEVATION ANGLE PER DETECTOR LINE (RADIANS)
      REAL SCNPX(2)
C                       SCAN ANGLE PER PIXEL (RADIANS)
      REAL EWNOM(2)
C                       EW CENTER OF INSTRUMENT
      REAL NSNOM(2)
C                       NS CENTER OF INSTRUMENT


      COMMON /INSTCO/ INCMAX,ELVMAX,SCNMAX,
     &   ELVINC,SCNINC,ELVLN,SCNPX,EWNOM,NSNOM
C========================= END DIINSTCO ===========================

C--------------------------------------------------------------------

      SCPX = (PIX - 1.) * SCNPX(INSTR) - SCNMAX(INSTR)

      RETURN
      END




      SUBROUTINE INST2E(R,P,Y,A,AT)

      IMPLICIT NONE

C CALLING PARAMETERS
      DOUBLE PRECISION R
C ROLL ANGLE IN RADIANS
      DOUBLE PRECISION P
C PITCH ANGLE IN RADIANS
      DOUBLE PRECISION Y
C YAW ANGLE IN RADIANS
      DOUBLE PRECISION A(3,3)
C SPACECRAFT TO ECEF COORDINATES TRANSFORMATION MATRIX
      DOUBLE PRECISION AT(3,3)
C INSTRUMENT TO ECEF COORDINATES TRANSFORMATION MATRIX

      DOUBLE PRECISION       RPY(3,3)
      INTEGER    I     , J

C-----------------------------------------------------------------------

C WE COMPUTE INSTRUMENT TO BODY COORDINATES TRANSFORMATION
C MATRIX BY USING A SMALL ANGLE APPROXIMATION OF TRIGONOMETRIC
C FUNKTIONS OF THE ROLL, PITCH AND YAW.
      RPY(1,1) = 1. - 0.5 * (P * P + Y * Y)
      RPY(1,2) = -Y
      RPY(1,3) = P
      RPY(2,1) = Y + P * R
      RPY(2,2) = 1. - 0.5 * (Y * Y + R * R)
      RPY(2,3) = -R
      RPY(3,1) = -P + R * Y
      RPY(3,2) = R + P * Y
      RPY(3,3) = 1. - 0.5 * (P * P + R * R)

C MULTIPLICATION OF MATRICES A AND RPY
      DO 20 I=1,3
        DO 10 J=1,3
          AT(I,J) = A(I,1) * RPY(1,J) + A(I,2) * RPY(2,J) + A(I,3)
     &                                                    * RPY(3,J)
 10     CONTINUE
 20   CONTINUE

      RETURN
      END




      SUBROUTINE LPOINT(INSTR,FLIP_FLG,ALPHA0,ZETA0,RLAT,RLON,IERR)

      IMPLICIT NONE

C CALLING PARAMETERS
C
      INTEGER*4 INSTR
C                    INSTRUMENT CODE (1=IMAGER,2=SOUNDER)
      INTEGER*4 FLIP_FLG
C                   S/C ORIENTATION FLAG (1=NORMAL,-1=INVERTED)


C CALLING PARAMETERS
      DOUBLE PRECISION   ALPHA0
      DOUBLE PRECISION   ALPHA
C ELEVATION ANGLE (RAD)
      DOUBLE PRECISION   ZETA0
      DOUBLE PRECISION   ZETA
C SCAN ANGLE (RAD)
      DOUBLE PRECISION   RLAT
C LATITUDE IN RADIANS (OUTPUT)
      DOUBLE PRECISION   RLON
C LONGITUDE IN RADIANS (OUTPUT)
      INTEGER IERR
C OUTPUT STATUS; 0 - POINT ON THE EARTH FOUND,
C                1 - INSTRUMENT POINTS OFF EARTH

      DOUBLE PRECISION AEC, FERC, Q1, Q2, D, H, G1(3)
      DOUBLE PRECISION SA, CA, DA, DZ, D1, CZ, G(3)
      DOUBLE PRECISION       U(3)
      DOUBLE PRECISION       AEBE2C, AEBE3C, AEBE4C
      DOUBLE PRECISION SZ, FF, DOFF



C     INCLUDE 'ELCONS.INC'
C=========================== DIELCONS =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCONS = INCLUDE

      DOUBLE PRECISION PI
           PARAMETER (PI=3.141592653589793D0)
      DOUBLE PRECISION DEG
           PARAMETER (DEG=180.D0/PI)
      DOUBLE PRECISION RAD
           PARAMETER (RAD=PI/180.D0)
C                    DEGREES TO RADIANS CONVERSION PI/180
      DOUBLE PRECISION NOMORB
           PARAMETER (NOMORB=42164.365D0)
C                    NOMINAL RADIAL DISTANCE OF SATELLITE (KM)
      DOUBLE PRECISION AE
           PARAMETER (AE=6378.137D0)
C                    EARTH EQUATORIAL RADIUS (KM)
      DOUBLE PRECISION FER
           PARAMETER (FER=1.D0-(6356.7533D0/AE))
C                    EARTH FLATTENING COEFFICIENT = 1-(BE/AE)
      REAL AEBE2
           PARAMETER (AEBE2=1.D0/(1.D0-FER)**2)
      REAL AEBE3
           PARAMETER (AEBE3=AEBE2-1.)
      REAL AEBE4
           PARAMETER (AEBE4=(1.D0-FER)**4-1.)
C========================= END DIELCONS ===========================
C     INCLUDE 'ELCOMM.INC'
C=========================== DIELCOMM =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCOMM = INCLUDE

C     COMMON VARIABLES
C
      DOUBLE PRECISION XS(3)
C                      NORMALIZED S/C POSITION IN ECEF COORDINATES
      DOUBLE PRECISION BT(3,3)
C                      ECEF TO INSTRUMENT COORDINATES TRANSFORMATION
      DOUBLE PRECISION  Q3
C                      USED IN SUBRTN LPOINT
      DOUBLE PRECISION PITCH,ROLL,YAW
C                          PITCH,ROLL,YAW ANGLES OF INSTRUMENT (RAD)
      REAL PMA,RMA
C                          PITCH,ROLL MISALIGNMENTS OF INSTRUMENT (RAD)
         COMMON /ELCOMM/ XS,BT,Q3,PITCH,ROLL,YAW,PMA,RMA
C========================= END DIELCOMM ===========================
C     INCLUDE 'INSTCO.INC'
C=========================== DIINSTCO =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIINSTCO = INCLUDE

      INTEGER INCMAX(2)
C                       NUMBER OF INCREMENTS PER CYCLE
      REAL ELVMAX(2)
C                       BOUNDS IN ELEVATION (RADIANS)
      REAL SCNMAX(2)
C                       BOUNDS IN SCAN ANGLE (RADIANS)
      REAL ELVINC(2)
C                       CHANGE IN ELEVATION ANGLE PER INCREMENT (RAD)
      REAL SCNINC(2)
C                       CHANGE IN SCAN ANGLE PER INCREMENT (RADIANS)
      REAL ELVLN(2)
C                       ELEVATION ANGLE PER DETECTOR LINE (RADIANS)
      REAL SCNPX(2)
C                       SCAN ANGLE PER PIXEL (RADIANS)
      REAL EWNOM(2)
C                       EW CENTER OF INSTRUMENT
      REAL NSNOM(2)
C                       NS CENTER OF INSTRUMENT

      COMMON /INSTCO/ INCMAX,ELVMAX,SCNMAX,
     &   ELVINC,SCNINC,ELVLN,SCNPX,EWNOM,NSNOM
C========================= END DIINSTCO ===========================


      COMMON /RADCOM/ AEC   , FERC  , AEBE2C, AEBE3C, AEBE4C

C-----------------------------------------------------------------------

      IERR=1
C
C      COMPUTE SIGN OF MISALIGNMENT CORRECTIONS AND ORIGIN OFFSET CORRECTIONS
C
      FF = FLIP_FLG
      IF (INSTR.EQ.2) FF = - FF
      DOFF = SCNMAX(INSTR) - EWNOM(INSTR)
C
C     ADD THE NEW SECOND ORDER ORIGIN OFFSET CORRECTION
C
      ALPHA = ALPHA0 - ALPHA0*ZETA0*DOFF
      ZETA  = ZETA0 + 0.5*ALPHA0*ALPHA0*DOFF
C
C     COMPUTES TRIGONOMETRIC FUNCTIONS OF THE SCAN AND ELEVATION
C     ANGLES CORRECTED FOR THE ROLL AND PITCH MISALIGNMENTS
C

      CA = DCOS(ALPHA)
      SA = DSIN(ALPHA)
      CZ = DCOS(ZETA)
      DA = ALPHA-PMA*SA*(FF/CZ+DTAN(ZETA))-RMA*(1.0D0-CA/CZ)
      DZ = ZETA + FF*RMA * SA

C
C    COMPUTES POINTING VECTOR IN INSTRUMENT COORDINATES
C
C CORRECTED SCAN ANGLE
      CZ = DCOS(DZ)

C COMPUTES POINTING VECTOR IN INSTRUMENT COORDINATES
      G(1) = DSIN(DZ)
      G(2) = -CZ * DSIN(DA)
      G(3) = CZ * DCOS(DA)

C
C     TRANSFORMS THE POINTING VECTOR TO EARTH-FIXED COORDINATES
C
      G1(1) = BT(1,1) * G(1) + BT(1,2) * G(2) + BT(1,3) * G(3)
      G1(2) = BT(2,1) * G(1) + BT(2,2) * G(2) + BT(2,3) * G(3)
      G1(3) = BT(3,1) * G(1) + BT(3,2) * G(2) + BT(3,3) * G(3)

C
C     COMPUTES COEFFICIENTS AND SOLVES A QUADRATIC EQUATION TO
C     FIND THE INTERSECT OF THE POINTING VECTOR WITH THE EARTH
C     SURFACE
C
      Q1 = G1(1)**2 + G1(2)**2 + AEBE2C * G1(3)**2
      Q2 = XS(1) * G1(1) + XS(2) * G1(2) + AEBE2C * XS(3) * G1(3)
      D  = Q2 * Q2 - Q1 * Q3
      IF (DABS(D).LT.1.D-9) D=0.

C
C     IF THE DISCIMINANTE OF THE EQUATION, D, IS NEGATIVE, THE
C     INSTRUMENT POINTS OFF THE EARTH
C
         IF (D.LT.0) THEN
            RLAT=999999.
            RLON=999999.
            RETURN
         END IF
         D=DSQRT(D)
C
C     SLANT DISTANCE FROM THE SATELLITE TO THE EARTH POINT
C
         H=-(Q2+D)/Q1
C
C     CARTESIAN COORDINATES OF THE EARTH POINT
C
         U(1)=XS(1)+H*G1(1)
         U(2)=XS(2)+H*G1(2)
         U(3)=XS(3)+H*G1(3)
C
C     SINUS OF GEOCENTRIC LATITUDE
C
      D1 = U(3) / DSQRT(U(1)**2 + U(2)**2 + U(3)**2)

C
C     GEOGRAPHIC (GEODETIC) COORDINATES OF THE POINT
C
      RLAT = DATAN(AEBE2C * D1 / DSQRT(1. - D1 * D1))
      RLON = DATAN2(U(2),U(1))
      IERR = 0

         RLAT=ATAN(AEBE2*D1/SQRT(1.-D1*D1))
         RLON=ATAN2(U(2),U(1))
         IERR=0

      RETURN
      END




      SUBROUTINE GPOINT(INSTR,FLIP_FLG,RLAT,RLON,ALF,GAM,IERR)

      IMPLICIT NONE

C
C     CALLING PARAMETERS
C
      INTEGER*4 INSTR
C                    INSTRUMENT CODE (1=IMAGER,2=SOUNDER)
      INTEGER*4 FLIP_FLG
C                   S/C ORIENTATION FLAG (1=NORMAL,-1=INVERTED)


      DOUBLE PRECISION   RLAT
C GEOGRAPHIC LATITUDE IN RADIANS (INPUT)
      DOUBLE PRECISION   RLON
C GEOGRAPHIC LONGITUDE IN RADIANS (INPUT)
      DOUBLE PRECISION   ALF
C ELEVATION ANGLE IN RADIANS (OUTPUT)
      DOUBLE PRECISION   GAM
C SCAN ANGLE IN RADIANS (OUTPUT)
      INTEGER IERR
C OUTPUT STATUS; 0 - SUCCESSFUL COMPLETION,
C                1 - POINT WITH GIVEN LAT/LON IS INVISIBLE

      DOUBLE PRECISION F(3)  , AEC   , FERC  , AEBE2C, AEBE3C, AEBE4C
      DOUBLE PRECISION FT(3) , U(3)  , SING  , SLAT  , W1    , W2



C
C     LOCAL VARIABLES
C
      DOUBLE PRECISION Z,CZ,SA,FF,DOFF,ALPHA,ALPHA1
C                    WORK SPACE
C
C     INCLUDE FILES
C



C     INCLUDE 'ELCONS.INC'
C=========================== DIELCONS =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCONS = INCLUDE

      DOUBLE PRECISION PI
           PARAMETER (PI=3.141592653589793D0)
      DOUBLE PRECISION DEG
           PARAMETER (DEG=180.D0/PI)
      DOUBLE PRECISION RAD
           PARAMETER (RAD=PI/180.D0)
C                    DEGREES TO RADIANS CONVERSION PI/180
      DOUBLE PRECISION NOMORB
           PARAMETER (NOMORB=42164.365D0)
C                    NOMINAL RADIAL DISTANCE OF SATELLITE (KM)
      DOUBLE PRECISION AE
           PARAMETER (AE=6378.137D0)
C                    EARTH EQUATORIAL RADIUS (KM)
      DOUBLE PRECISION FER
           PARAMETER (FER=1.D0-(6356.7533D0/AE))
C                    EARTH FLATTENING COEFFICIENT = 1-(BE/AE)
      REAL AEBE2
           PARAMETER (AEBE2=1.D0/(1.D0-FER)**2)
      REAL AEBE3
           PARAMETER (AEBE3=AEBE2-1.)
      REAL AEBE4
           PARAMETER (AEBE4=(1.D0-FER)**4-1.)
C========================= END DIELCONS ===========================
C     INCLUDE 'ELCOMM.INC'
C=========================== DIELCOMM =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCOMM = INCLUDE

C     COMMON VARIABLES
C
      DOUBLE PRECISION XS(3)
C                      NORMALIZED S/C POSITION IN ECEF COORDINATES
      DOUBLE PRECISION BT(3,3)
C                      ECEF TO INSTRUMENT COORDINATES TRANSFORMATION
      DOUBLE PRECISION  Q3
C                      USED IN SUBRTN LPOINT
      DOUBLE PRECISION PITCH,ROLL,YAW
C                          PITCH,ROLL,YAW ANGLES OF INSTRUMENT (RAD)
      REAL PMA,RMA
C                          PITCH,ROLL MISALIGNMENTS OF INSTRUMENT (RAD)
         COMMON /ELCOMM/ XS,BT,Q3,PITCH,ROLL,YAW,PMA,RMA
C========================= END DIELCOMM ===========================
C     INCLUDE 'INSTCO.INC'
C=========================== DIINSTCO =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIINSTCO = INCLUDE

      INTEGER INCMAX(2)
C                       NUMBER OF INCREMENTS PER CYCLE
      REAL ELVMAX(2)
C                       BOUNDS IN ELEVATION (RADIANS)
      REAL SCNMAX(2)
C                       BOUNDS IN SCAN ANGLE (RADIANS)
      REAL ELVINC(2)
C                       CHANGE IN ELEVATION ANGLE PER INCREMENT (RAD)
      REAL SCNINC(2)
C                       CHANGE IN SCAN ANGLE PER INCREMENT (RADIANS)
      REAL ELVLN(2)
C                       ELEVATION ANGLE PER DETECTOR LINE (RADIANS)
      REAL SCNPX(2)
C                       SCAN ANGLE PER PIXEL (RADIANS)
      REAL EWNOM(2)
C                       EW CENTER OF INSTRUMENT
      REAL NSNOM(2)
C                       NS CENTER OF INSTRUMENT

      COMMON /INSTCO/ INCMAX,ELVMAX,SCNMAX,
     &   ELVINC,SCNINC,ELVLN,SCNPX,EWNOM,NSNOM
C========================= END DIINSTCO ===========================

      COMMON /RADCOM/ AEC   , FERC  , AEBE2C, AEBE3C, AEBE4C

C-----------------------------------------------------------------------



C  COMPUTES SINUS OF GEOGRAPHIC (GEODETIC) LATITUDE
C
      SING = DSIN(RLAT)
      W1   = AEBE4C * SING * SING

C
C      COMPUTE SIGN OF MISALIGNMENT CORRECTIONS AND ORIGIN OFFSET CORRECTIONS
C
      FF = FLIP_FLG
      IF (INSTR.EQ.2) FF = - FF
      DOFF = SCNMAX(INSTR) - EWNOM(INSTR)
C
C     SINUS OF THE GEOCENTRIC LATITUDE
C
      SLAT = ((0.375 * W1 - 0.5) * W1 + 1.) * SING / AEBE2C

C
C    COMPUTES LOCAL EARTH RADIUS AT SPECIFIED POINT
C
      W2 = SLAT * SLAT
      W1 = AEBE3C * W2
      W1 = (0.375 * W1 - 0.5) * W1 + 1.

C
C     COMPUTES CARTESIAN COORDINATES OF THE POINT
C
      U(3) = SLAT * W1
      W2   = W1 * DSQRT(1. - W2)
      U(1) = W2 * DCOS(RLON)
      U(2) = W2 * DSIN(RLON)

C
C     POINTING VECTOR FROM SATELLITE TO THE EARTH POINT
C
      F(1) = U(1) - XS(1)
      F(2) = U(2) - XS(2)
      F(3) = U(3) - XS(3)
      W2   = U(1) * SNGL(F(1)) + U(2) * SNGL(F(2))+ U(3) * SNGL(F(3))
     &                                                   * AEBE2C

C
C     VERIFIES VISIBILITY OF THE POINT
C
         IF (W2.GT.0.) THEN
                   IERR=1
                   ALF=99999.
                   GAM=99999.
                   RETURN
          END IF
C
C    CONVERTS POINTING VECTOR TO INSTRUMENT COORDINATES
C
      FT(1) = BT(1,1) * F(1) + BT(2,1) * F(2) + BT(3,1) * F(3)
      FT(2) = BT(1,2) * F(1) + BT(2,2) * F(2) + BT(3,2) * F(3)
      FT(3) = BT(1,3) * F(1) + BT(2,3) * F(2) + BT(3,3) * F(3)

C
C     CONVERTS POINTING VECTOR TO SCAN AND ELEVATION ANGLES AND
C     CORRECTS FOR THE ROLL AND PITCH MISALIGNMENTS
C


      GAM  = DATAN(FT(1) / DSQRT(FT(2)**2 + FT(3)**2))
      ALF  = -DATAN(FT(2) / FT(3))
      W1   = DSIN(ALF)
      W2   = DCOS(GAM)
C


C
      ALPHA1  = ALF + RMA * (1. - DCOS(ALF) / W2) + PMA * W1 *
     &                                   (FF / W2 + DTAN(GAM))
      GAM  = GAM - FF * RMA * W1
      ALF  = ALPHA1 + ALPHA1 * GAM * DOFF
      GAM  = GAM - 0.5 * ALPHA1 * ALPHA1 * DOFF
      IERR = 0

      RETURN
      END
c
c--- an in-line version of gvrang (originally angles.for) must be
c--- included because of the common block, elcomm.
c
c--- this is required because the preprocessor, convdlm, renames
c--- all of the common blocks, appending the nav type.  the common
c--- block in angles.for was not being renamed, and therefor not
c--- being accessed.  one of the big problems with this solution
c--- is that applications cannot currently call angles directly
c--- for goes-8 navigation.  applications should use nvxopt('ANG '...)
c--- instead.
c

      SUBROUTINE GVRANG(JDAY,JTIME,XLAT,XLON,GHA,DEC,SATANG,SUNANG,RELAN
     &G)
C
C $ SUBROUTINE ANGLES(JDAY,JTIME,XLAT,XLON,GHA,DEC,SATANG,SUNANG,RELANG)
C $ ANGLES - computes zenith angles of sun and satellite and relative
C $   azimuth angle              (DAS)
C $ INPUT:
C $   JDAY = (I) picture day (YYDDD)
C $   JTIME = (I) picture start time
C $   XLAT = (R) latitude of point
C $   XLON = (R) longitude of point
C $   GHA = (R) Greenwich hour angle of sun
C $   DEC = (R) declination of sun
C $ OUTPUT:
C $   SATANG = (R) zenith angle of satellite
C $   SUNANG = (R) zenith angle of sun
C $   RELANG = (R) relative angle
C $$ ANGLES = COMPUTATION, NAVIGATION
C ANGLES MOSHER 1074 WINLIB  ZENITH ANGLES TO SAT,SUN,AND REL AZIMUTH AN
C
C     INCLUDE 'ELCONS.INC'
C=========================== DIELCONS =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCONS = INCLUDE

      DOUBLE PRECISION PI
           PARAMETER (PI=3.141592653589793D0)
      DOUBLE PRECISION DEG
           PARAMETER (DEG=180.D0/PI)
      DOUBLE PRECISION RAD
           PARAMETER (RAD=PI/180.D0)
C                    DEGREES TO RADIANS CONVERSION PI/180
      DOUBLE PRECISION NOMORB
           PARAMETER (NOMORB=42164.365D0)
C                    NOMINAL RADIAL DISTANCE OF SATELLITE (KM)
      DOUBLE PRECISION AE
           PARAMETER (AE=6378.137D0)
C                    EARTH EQUATORIAL RADIUS (KM)
      DOUBLE PRECISION FER
           PARAMETER (FER=1.D0-(6356.7533D0/AE))
C                    EARTH FLATTENING COEFFICIENT = 1-(BE/AE)
      REAL AEBE2
           PARAMETER (AEBE2=1.D0/(1.D0-FER)**2)
      REAL AEBE3
           PARAMETER (AEBE3=AEBE2-1.)
      REAL AEBE4
           PARAMETER (AEBE4=(1.D0-FER)**4-1.)
C========================= END DIELCONS ===========================
C     INCLUDE 'ELCOMM.INC'
C=========================== DIELCOMM =============================

C $   (JR)
C $   THIS INCLUDE FILE IS PART OF THE SUPPLIED GVAR NAV SOFTWARE
C $
C $   DESCRIPTION:
C $
C $
C $$  DIELCOMM = INCLUDE

C     COMMON VARIABLES
C
      DOUBLE PRECISION XS(3)
C                      NORMALIZED S/C POSITION IN ECEF COORDINATES
      DOUBLE PRECISION BT(3,3)
C                      ECEF TO INSTRUMENT COORDINATES TRANSFORMATION
      DOUBLE PRECISION Q3
C                      USED IN SUBROUTINE LPOINT
      DOUBLE PRECISION PITCH,ROLL,YAW
C                          PITCH,ROLL,YAW ANGLES OF INSTRUMENT (RAD)
      REAL PMA,RMA
C                          PITCH,ROLL MISALIGNMENTS OF INSTRUMENT (RAD)
         COMMON /ELCOMM/ XS,BT,Q3,PITCH,ROLL,YAW,PMA,RMA
C========================= END DIELCOMM ===========================
      DATA IDAY/0/
      DATA R/6371.221/
      RDPDG=PI/180.0
      IF(IDAY.EQ.JDAY)GO TO 1
      IDAY=JDAY
      INORB=0
 1    PICTIM=FTIME(JTIME)
C
C   DETERMINE SATELLITE POSITION
C
      XSAT = XS(1) * AE
      YSAT = XS(2) * AE
      ZSAT = XS(3) * AE

      HEIGHT=SQRT(XSAT**2+YSAT**2+ZSAT**2)
      YLAT=RDPDG*XLAT
      YLAT=GEOLAT(YLAT,1)
      YLON=RDPDG*XLON
      SLAT=SIN(YLAT)
      CLAT=COS(YLAT)
      SLON=SIN(YLON)
      CLON=COS(YLON)
      XSAM=R*CLAT*CLON
      YSAM=R*CLAT*SLON
      ZSAM=R*SLAT
C
C   DETERMINE ZENITH ANGLE OF SUN
C
      SNLG=-PICTIM*PI/12.0-RDPDG*GHA
      SNDC=RDPDG*DEC
      COSDEC=COS(SNDC)
      US=COS(SNLG)*COSDEC
      VS=SIN(SNLG)*COSDEC
      WS=SIN(SNDC)
      SUNANG=ACOS((US*XSAM+VS*YSAM+WS*ZSAM)/R)/RDPDG
C
C   DETERMINE ZENITH ANGLE OF SATELLITE
C
      XVEC=XSAT-XSAM
      YVEC=YSAT-YSAM
      ZVEC=ZSAT-ZSAM
      XFACT=SQRT(XVEC**2+YVEC**2+ZVEC**2)
      SATANG=ACOS((XVEC*XSAM+YVEC*YSAM+ZVEC*ZSAM)/(R*XFACT))/RDPDG
C
C   DETERMINE RELATIVE ANGLE
C
      X1=CLAT*CLON
      Y1=CLAT*SLON
      Z1=SLAT
      X2=SLON
      Y2=-CLON
      X3=-SLAT*CLON
      Y3=-SLAT*SLON
      Z3=CLAT
      XC1=US-X1
      YC1=VS-Y1
      ZC1=WS-Z1
      XC2=XSAT/HEIGHT-X1
      YC2=YSAT/HEIGHT-Y1
      ZC2=ZSAT/HEIGHT-Z1
      XAN1=XC1*X3+YC1*Y3+ZC1*Z3
      XAN2=XC2*X3+YC2*Y3+ZC2*Z3
      YAN1=XC1*X2+YC1*Y2
      YAN2=XC2*X2+YC2*Y2
      XAN3=XAN1*XAN2+YAN1*YAN2
      YAN3=-YAN1*XAN2+XAN1*YAN2
      RELANG=ATAN2(YAN3,XAN3)/RDPDG
      RELANG=ABS(RELANG)
      RETURN
      END
