! Started logfile: J0543+8238_S_2006_02_23_yyk_uvs.log on Wed Jul 5 11:28:42 2006 obs J0543+8238_S_2006_02_23_yyk_uva.fits ! Reading UV FITS file: J0543+8238_S_2006_02_23_yyk_uva.fits ! AN table 1: 879 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.989205 visibilities/baseline/integration-bin. ! Found source: J0543+8238 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23697e+09 8e+06 1 8e+06 ! 02 2 2.26697e+09 8e+06 1 8e+06 ! 03 3 2.35697e+09 8e+06 1 8e+06 ! 04 4 2.37697e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 2423 lines of history. ! ! Reading 156512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ![@muppet J0543+8238_S_2006_02_23_yyk] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.04 float dynam dynam = 6.0 float amp_soltime1 amp_soltime1 = 10 float amp_soltime2 amp_soltime2 = 1 float phase_soltime1 phase_soltime1=10 float phase_soltime2 phase_soltime2=0.5 float phase_soltime phase_soltime=phase_soltime1 float ampcor_selflim ampcor_selflim=1.20 float thresh thresh = 0.10 float win_mult win_mult = 1.8 float time_av time_av = 30 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.500x0.500 milli-arcsec cellsize. uvav time_av, true ! Averaging into 30 second bins. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 phase_soltime=phase_soltime1 print "uvstat(rms)=",uvstat(rms),"Jy" ! uvstat(rms)= 0.219999 Jy uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.432 mas, bmaj=10.57 mas, bpa=3.955 degrees ! Estimated noise=1.29517 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.169352 Jy ! Component: 100 - total flux cleaned = 0.209393 Jy ! Total flux subtracted in 100 components = 0.209393 Jy ! Clean residual min=-0.009370 max=0.012143 Jy/beam ! Clean residual mean=0.000102 rms=0.002810 Jy/beam ! Combined flux in latest and established models = 0.209393 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.209393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078083Jy sigma=1.231803 ! Fit after self-cal, rms=0.077987Jy sigma=1.229910 ! Inverting map and beam ! Estimated beam: bmin=2.432 mas, bmaj=10.57 mas, bpa=3.955 degrees ! Estimated noise=1.29517 mJy/beam. print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.113 mas, bmaj=11.03 mas, bpa=3.509 degrees ! Estimated noise=0.730161 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204341 Jy ! Component: 100 - total flux cleaned = 0.0305832 Jy ! Component: 150 - total flux cleaned = 0.036288 Jy ! Component: 200 - total flux cleaned = 0.0396772 Jy ! Total flux subtracted in 200 components = 0.0396772 Jy ! Clean residual min=-0.005913 max=0.008491 Jy/beam ! Clean residual mean=-0.000058 rms=0.001830 Jy/beam ! Combined flux in latest and established models = 0.24907 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 41 model components to the UV plane model. ! The established model now contains 52 components and 0.24907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073253Jy sigma=1.148792 ! Fit after self-cal, rms=0.073222Jy sigma=1.148156 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.113 x 11.03 at 3.509 degrees (North through East) ! Clean map min=-0.0059994 max=0.2014 Jy/beam if(peak(flux) < thresh*2) selflims ampcor_selflim end if gscale ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Amplitude normalization factor in sub-array 1: 0.998861 ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.90 HN 1.01 KP 0.96 ! LA 1.25 MK 0.90 NL 0.97 OV 0.99 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 2. ! Amplitude normalization factor in sub-array 1: 0.986222 ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.99 HN 1.04 KP 0.98 ! LA 1.16 MK 1.00 NL 0.99 OV 1.03 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 3. ! Amplitude normalization factor in sub-array 1: 0.992121 ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 0.97 HN 1.02 KP 0.96 ! LA 0.95 MK 1.12 NL 1.07 OV 1.05 ! PT 1.04 SC 1.07 ! ! ! Correcting IF 4. ! Amplitude normalization factor in sub-array 1: 1.03634 ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 0.96 KP 0.89 ! LA 0.79 MK 1.08 NL 1.00 OV 0.86 ! PT 0.89 SC 1.15 ! ! ! Fit before self-cal, rms=0.073222Jy sigma=1.148156 ! Fit after self-cal, rms=0.065642Jy sigma=1.065837 selfcal false, false, phase_soltime ! Performing phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065642Jy sigma=1.065837 ! Fit after self-cal, rms=0.065652Jy sigma=1.065785 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=10.98 mas, bpa=3.421 degrees ! Estimated noise=0.729061 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10.5, -43.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00902559 Jy ! Component: 100 - total flux cleaned = 0.0115319 Jy ! Component: 150 - total flux cleaned = 0.0129983 Jy ! Component: 200 - total flux cleaned = 0.0136123 Jy ! Total flux subtracted in 200 components = 0.0136123 Jy ! Clean residual min=-0.003026 max=0.003092 Jy/beam ! Clean residual mean=0.000031 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.262682 Jy ! Performing phase self-cal over 10 minute time intervals ! Adding 36 model components to the UV plane model. ! The established model now contains 85 components and 0.262682 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064756Jy sigma=1.047456 ! Fit after self-cal, rms=0.064746Jy sigma=1.047318 ! Inverting map print "************** FINISHED AMPLITUDE GSCALE SELF-CAL **************" ! ************** FINISHED AMPLITUDE GSCALE SELF-CAL ************** ! phase_soltime=phase_soltime2 selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064746Jy sigma=1.047318 ! Fit after self-cal, rms=0.061275Jy sigma=0.981420 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017249 Jy ! Component: 100 - total flux cleaned = 0.00236279 Jy ! Component: 150 - total flux cleaned = 0.00280064 Jy ! Component: 200 - total flux cleaned = 0.00313243 Jy ! Total flux subtracted in 200 components = 0.00313243 Jy ! Clean residual min=-0.002757 max=0.002912 Jy/beam ! Clean residual mean=0.000026 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.265815 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 47 model components to the UV plane model. ! The established model now contains 113 components and 0.265815 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061112Jy sigma=0.979190 ! Fit after self-cal, rms=0.061020Jy sigma=0.976933 ! Inverting map print "*** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime ***" ! *** FINISHED NATURAL WEIGHTING CLEAN with shorter phase_soltime *** ! dynam = dynam - 0.25 restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.208 x 10.98 at 3.421 degrees (North through East) ! Clean map min=-0.0026855 max=0.20506 Jy/beam if(peak(flux) > thresh) selfcal true, true, amp_soltime1 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true, amp_soltime2 selfcal false, false, phase_soltime flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) print "************** FINISHED AMPLITUDE SELF-CAL **************" end if ! Performing amp+phase self-cal over 10 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061020Jy sigma=0.976933 ! Fit after self-cal, rms=0.060201Jy sigma=0.963606 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060201Jy sigma=0.963606 ! Fit after self-cal, rms=0.060201Jy sigma=0.963433 ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=10.98 mas, bpa=3.361 degrees ! Estimated noise=0.72726 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283356 Jy ! Component: 100 - total flux cleaned = 0.000436312 Jy ! Component: 150 - total flux cleaned = 0.000670181 Jy ! Component: 200 - total flux cleaned = 0.00083872 Jy ! Total flux subtracted in 200 components = 0.00083872 Jy ! Clean residual min=-0.002637 max=0.002692 Jy/beam ! Clean residual mean=0.000027 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.266654 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 46 model components to the UV plane model. ! The established model now contains 145 components and 0.266654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060143Jy sigma=0.962314 ! Fit after self-cal, rms=0.060140Jy sigma=0.962256 ! Inverting map ! Performing amp+phase self-cal over 1 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060140Jy sigma=0.962256 ! Fit after self-cal, rms=0.054770Jy sigma=0.928276 ! Performing phase self-cal over 0.5 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054770Jy sigma=0.928276 ! Fit after self-cal, rms=0.054773Jy sigma=0.928228 ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=10.98 mas, bpa=3.341 degrees ! Estimated noise=0.725857 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109108 Jy ! Component: 100 - total flux cleaned = 6.09322e-05 Jy ! Component: 150 - total flux cleaned = 0.000180078 Jy ! Component: 200 - total flux cleaned = 0.00025551 Jy ! Total flux subtracted in 200 components = 0.00025551 Jy ! Clean residual min=-0.002507 max=0.002655 Jy/beam ! Clean residual mean=0.000024 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.266909 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 44 model components to the UV plane model. ! The established model now contains 169 components and 0.266909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054719Jy sigma=0.927410 ! Fit after self-cal, rms=0.054715Jy sigma=0.927373 ! Inverting map ! ************** FINISHED AMPLITUDE SELF-CAL ************** uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.4 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.522 mas, bmaj=12.6 mas, bpa=1.176 degrees ! Estimated noise=0.909993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal false,false,phase_soltime new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000521716 Jy ! Component: 100 - total flux cleaned = 0.000639989 Jy ! Component: 150 - total flux cleaned = 0.000702868 Jy ! Component: 200 - total flux cleaned = 0.000753485 Jy ! Total flux subtracted in 200 components = 0.000753485 Jy ! Clean residual min=-0.002426 max=0.003078 Jy/beam ! Clean residual mean=0.000046 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.267663 Jy ! Performing phase self-cal over 0.5 minute time intervals ! Adding 29 model components to the UV plane model. ! The established model now contains 194 components and 0.267662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054711Jy sigma=0.927252 ! Fit after self-cal, rms=0.054697Jy sigma=0.927106 ! Inverting map uvtaper 0 ! No UV-taper is currently set. win_mult = win_mult / 1.4 print "************** FINISHED TAPERING SELF-CAL CLEAN **************" ! ************** FINISHED TAPERING SELF-CAL CLEAN ************** ! print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true,true,true ! clrmod: Cleared the established, tentative and continuum models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter, clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.467 mas, bmaj=10.53 mas, bpa=3.871 degrees ! Estimated noise=1.29675 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.170434 Jy ! Component: 100 - total flux cleaned = 0.209312 Jy ! Component: 150 - total flux cleaned = 0.224877 Jy ! Component: 200 - total flux cleaned = 0.234378 Jy ! Total flux subtracted in 200 components = 0.234378 Jy ! Clean residual min=-0.005107 max=0.006265 Jy/beam ! Clean residual mean=0.000054 rms=0.001474 Jy/beam ! Combined flux in latest and established models = 0.234378 Jy uvw 0,-2 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -2. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.234378 Jy ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=10.98 mas, bpa=3.341 degrees ! Estimated noise=0.725857 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -20.5). ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.011019 Jy ! Component: 100 - total flux cleaned = 0.0176671 Jy ! Component: 150 - total flux cleaned = 0.0224137 Jy ! Component: 200 - total flux cleaned = 0.0254564 Jy ! Total flux subtracted in 200 components = 0.0254564 Jy ! Clean residual min=-0.002540 max=0.003016 Jy/beam ! Clean residual mean=0.000033 rms=0.000808 Jy/beam ! Combined flux in latest and established models = 0.259835 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 93 components and 0.259835 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=7.522 mas, bmaj=12.6 mas, bpa=1.176 degrees ! Estimated noise=0.909993 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.00381781 Jy ! Component: 100 - total flux cleaned = 0.00536902 Jy ! Component: 150 - total flux cleaned = 0.0060754 Jy ! Component: 200 - total flux cleaned = 0.00661673 Jy ! Total flux subtracted in 200 components = 0.00661673 Jy ! Clean residual min=-0.002561 max=0.002819 Jy/beam ! Clean residual mean=0.000059 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.266451 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 147 components and 0.266451 Jy ! Inverting map uvtaper 0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.214 mas, bmaj=10.98 mas, bpa=3.341 degrees ! Estimated noise=0.725857 mJy/beam. ! clean: niter=200 gain=0.04 cutoff=0 ! Component: 050 - total flux cleaned = 0.000584597 Jy ! Component: 100 - total flux cleaned = 0.00084277 Jy ! Component: 150 - total flux cleaned = 0.000900622 Jy ! Component: 200 - total flux cleaned = 0.000948499 Jy ! Total flux subtracted in 200 components = 0.000948499 Jy ! Clean residual min=-0.002187 max=0.002217 Jy/beam ! Clean residual mean=0.000030 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.2674 Jy selfcal false, false, phase_soltime ! Performing phase self-cal over 0.5 minute time intervals ! Adding 43 model components to the UV plane model. ! The established model now contains 186 components and 0.267399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054527Jy sigma=0.924123 ! Fit after self-cal, rms=0.054480Jy sigma=0.923267 wmodel J0543+8238_S_2006_02_23_yyk\_map.mod ! Writing 186 model components to file: J0543+8238_S_2006_02_23_yyk_map.mod wobs J0543+8238_S_2006_02_23_yyk\_uvs.fits ! Writing UV FITS file: J0543+8238_S_2006_02_23_yyk_uvs.fits wwins J0543+8238_S_2006_02_23_yyk\_map.win ! wwins: Wrote 3 windows to J0543+8238_S_2006_02_23_yyk_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.93336e-06 Jy ! Component: 100 - total flux cleaned = -0.000331166 Jy ! Component: 150 - total flux cleaned = -0.000396272 Jy ! Component: 200 - total flux cleaned = -0.000427067 Jy ! Component: 250 - total flux cleaned = -0.000427432 Jy ! Component: 300 - total flux cleaned = -0.000426252 Jy ! Component: 350 - total flux cleaned = -0.00031308 Jy ! Component: 400 - total flux cleaned = -0.000149606 Jy ! Component: 450 - total flux cleaned = 3.62192e-05 Jy ! Component: 500 - total flux cleaned = 0.000243196 Jy ! Component: 550 - total flux cleaned = 0.000395263 Jy ! Component: 600 - total flux cleaned = 0.000494486 Jy ! Component: 650 - total flux cleaned = 0.00056783 Jy ! Component: 700 - total flux cleaned = 0.000544251 Jy ! Component: 750 - total flux cleaned = 0.000521072 Jy ! Component: 800 - total flux cleaned = 0.000544331 Jy ! Component: 850 - total flux cleaned = 0.000544505 Jy ! Component: 900 - total flux cleaned = 0.000567072 Jy ! Component: 950 - total flux cleaned = 0.000588952 Jy ! Component: 1000 - total flux cleaned = 0.000588603 Jy ! Component: 1050 - total flux cleaned = 0.000609574 Jy ! Component: 1100 - total flux cleaned = 0.000630367 Jy ! Component: 1150 - total flux cleaned = 0.000588919 Jy ! Component: 1200 - total flux cleaned = 0.000548558 Jy ! Component: 1250 - total flux cleaned = 0.000548617 Jy ! Component: 1300 - total flux cleaned = 0.000548584 Jy ! Component: 1350 - total flux cleaned = 0.000548674 Jy ! Component: 1400 - total flux cleaned = 0.000548451 Jy ! Component: 1450 - total flux cleaned = 0.000510425 Jy ! Component: 1500 - total flux cleaned = 0.000491972 Jy ! Component: 1550 - total flux cleaned = 0.000547911 Jy ! Component: 1600 - total flux cleaned = 0.000510826 Jy ! Component: 1650 - total flux cleaned = 0.000474203 Jy ! Component: 1700 - total flux cleaned = 0.000456423 Jy ! Component: 1750 - total flux cleaned = 0.000456342 Jy ! Component: 1800 - total flux cleaned = 0.000385983 Jy ! Component: 1850 - total flux cleaned = 0.000351119 Jy ! Component: 1900 - total flux cleaned = 0.000385597 Jy ! Component: 1950 - total flux cleaned = 0.000317033 Jy ! Component: 2000 - total flux cleaned = 0.000283093 Jy ! Total flux subtracted in 2048 components = 0.000283151 Jy ! Clean residual min=-0.001182 max=0.000907 Jy/beam ! Clean residual mean=0.000011 rms=0.000353 Jy/beam ! Combined flux in latest and established models = 0.267683 Jy keep ! Adding 152 model components to the UV plane model. ! The established model now contains 338 components and 0.267683 Jy ![Exited script file: muppet] wmap "J0543+8238_S_2006_02_23_yyk\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.214 x 10.98 at 3.341 degrees (North through East) ! Clean map min=-0.0019642 max=0.20401 Jy/beam ! Writing clean map to FITS file: J0543+8238_S_2006_02_23_yyk_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.204007 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000349152 device "J0543+8238_S_2006_02_23_yyk\_map.eps/VPS" ! Attempting to open device: 'J0543+8238_S_2006_02_23_yyk_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.513441 0.513441 1.02688 2.05376 4.10752 8.21505 16.4301 32.8602 65.7204 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(peak_flux*1000)/1000 ! peak= 0.204 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.214 x 10.98 at 3.341 degrees (North through East) ! Clean map min=-0.0019642 max=0.20401 Jy/beam mapcolor color, 0.9 ! Mapplot colormap: rainbow, contrast: 0.9 brightness: 0.5. device "J0543+8238_S_2006_02_23_yyk\_map.gif/gif" ! Attempting to open device: 'J0543+8238_S_2006_02_23_yyk_map.gif/gif' mapplot cln quit ! Quitting program ! Log file J0543+8238_S_2006_02_23_yyk_uvs.log closed on Wed Jul 5 11:29:19 2006