error_code error_desc 5 Radio Service Code is required. 10 Answer to Developmental/STA question is required. 13 Answer to Waiver question is required. 15 Licensee Type is required. 20 Applicant Individual Name is required when Licensee Type is Individual. 25 Applicant Entity Name is required when Licensee Type is not Individual. 27 Enter either an Individual Name or an Entity Name. 30 Real Party in Interest of Applicant TIN or FRN is required. 32 Real Party in Interest of Applicant TIN must be 9 numerics. 33 Real Party in Interest of Applicant TIN/FRN is not registered with the FCC. 35 Either Licensee P.O. Box or Licensee Street Address is required. 36 Either Assignee/Transferee P.O. Box or Assignee/Transferee Street Address is required. 37 Either Assignor/Transferor P.O. Box or Assignor/Transferor Street Address is required. 40 Licensee City is required. 45 Licensee State is required. 50 Invalid Licensee State. 55 Licensee Zip is required. 60 Invalid Licensee State and Zip combination. 61 Invalid Assignor/Transferor State and Zip combination. 62 Invalid Assignee/Transferee State and Zip combination. 65 Licensee phone Number must be 10 digits. 66 Assignor/transferor phone Number must be 10 digits. 67 Assignee/transferee phone Number must be 10 digits. 70 Licensee fax number must be 10 digits. 71 Assignor/transferor fax number must be 10 digits. 72 Assignee/transferor fax number must be 10 digits. 75 Invalid Licensee E-Mail. 80 Contact Name is required. 82 Either Contact P.O. Box or Street Address is required. 83 Contact City is required. 84 Contact State is required. 85 Invalid Contact State. 90 Invalid Contact Zip. 92 Contact Zip is required. 95 Invalid Contact State and Zip Combination. 100 Contact Phone Number is required. 105 Invalid Contact Phone Number. 110 Licensee contact fax number must be 10 digits. 111 Assignor/transferor contact fax number must be 10 digits. 112 Assignee/transferee contact fax number must be 10 digits. 115 Invalid Contact E-Mail. 120 Regulatory Status is required. 125 Type of Radio Service is required. 130 An answer to the Interconnected Service question is required. 135 An answer to Fee Status Question 1 is required. 140 An answer to Fee Status Question 2 is required. 145 An answer to the Environmental Policy question is required. 150 An answer to Alien Ownership question 1 is required. 155 An answer to Alien Ownership question 2 is required. 160 An answer to Alien Ownership question 3 is required. 165 An answer to Alien Ownership question 4 is required. 170 An answer to Alien Ownership question 5 is required. 175 An answer to Basic Qualification question 1 is required. 180 An answer to Basic Qualification question 2 is required. 185 An answer to Basic Qualification question 3 is required. 190 An answer to Basic Qualification question 4 is required. 195 Name of Party Authorized to Sign is required. 196 First Name of Party Authorized to Sign is required. 197 Last Name of Party Authorized to Sign is required. 200 Title of Party Authorized to Sign is required. 205 You must select at least one Market. 206 If Coordinate Data is supplied, then an answer to the Environmental Policy question is required. 207 Coordinate Data is required when answer to Environmental Policy question is 'Y'. 210 Invalid Latitude Degrees. 213 Coordinates, City and State are required. 215 Invalid Latitude Minutes. 220 Invalid Latitude Seconds. 225 Invalid Longitude Degrees. 230 Invalid Longitude Minutes. 235 Invalid Longitude Seconds. 240 Invalid Environmental Data County. 245 Invalid Environmental Data State. 1000 DB Error While Setting Appl_Status_Code. 1001 DB Error While Assigning an Action Item. 1002 DB Error While Testing for Alert List Clearance. 1003 DB Error While Testing for Alien Ownership Clearance. 1004 DB Error While Testing for Basic Qualification Clearance. 1005 DB Error While Testing for Fee Sufficiency Clearance. 1006 DB Error Setting License Status Code. 1007 DB Error While Assigning an LOG. 1008 DB Error While Assigning a Manager to the Application. 1009 DB Error While Testing for NEPA Clearance. 1010 DB Error While Testing for Review List Clearance. 1011 DB Error While Testing for Waiver Review Clearance. 1012 DB Error Setting New Expiration Date. 1500 Pro Forma response is required. 1501 How the transfer will be accomplished is required. 1502 Indicate if transfer of control is voluntary or involuntary. 1503 Certifier First Name is Required. 1504 Certifier Last Name is Required. 1505 Certifier Title is Required. 1510 Signature Date cannot be greater than today's date. 2010 An Answer for Pro Forma is Required. 2015 An Answer for Full Assigment is Required. 2020 The Assigment of Authorization of License is Required. 2025 How Will Assigment be Accomplished is Required. 2030 Description for Other Type of Assigment is Required. 2035 You must select at least one Call Sign. 2040 The TIN used to login does not match the TIN on the application for the assignee/transferee. 2041 Application for Assignment or Transfer of Control has not been consented to by the FCC. 2042 Application for Assignment or Transfer of Control has already been consummated. 2043 Application for Assignment or Transfer of Control has already been granted. 2044 File Number provided is not for an application requesting Transfer of Control or Assignment of Authorization. 2045 Invalid Call Sign for the given TIN. 2046 The entered file number is not a valid file number in ULS. 2047 This application is not ready for Consummation yet. 2048 Consummation Date cannot be greater than the Consummation Deadline. 2050 Consummation File Number and/or Consummation Date are required. 2051 File Number of Assignment or Transfer of Control is required. 2052 Consummation Date is required. 2055 Coverage Date and Call Sign(s) are required. 2060 All call signs must be in the same radio service. 2065 Buildout/Coverage Date is required. 2070 Satisfaction of Construction Date is required. 2075 This type of Buildout/Coverage Date is invalid for the given Radio Service. 2077 Only Call Sign and Location Number are valid for the given Radio Service. 2080 This License already has this construction/coverage date. 2085 Call Sign is required. 2090 Transmitter Number and Path Number only apply to Microwave. 2095 Path Number must be supplied with Transmitter Number. 2100 Location Number cannot be used in combination with Path Number. 2105 To enter a frequency range, you must enter the lower and upper frequencies. To enter a specific / assigned frequency, enter it in center/lower frequency field. 2110 Buildout requirements are not applicable to this license. 2115 Invalid Location number for the given TIN. 2120 Invalid Transmitter number for the given TIN. 2125 Invalid Path number for the given TIN. 2130 This frequency does not exist on this license. 2131 This frequency does not exist on this Location. 2132 This frequency does not exist on this Path. 2135 Since you have entered a frequency, you must also enter its path number for microwave services or its location number for all other services. 2140 Invalid Call Sign for a site-by-site application. 2145 Invalid Call Sign for a market-based application. 3995 Invalid county for state. 4000 Type of Radio Service is required. 4005 Application Purpose is required. 4010 Application Purpose is required. 4015 Answer to Developmental/STA question is required. 4017 An answer to the 'Is this request 'major' as defined in Section 1.929.....?' question is required. 4019 An answer to the 'Are the frequencies or parameters requested in this filing covered by....?' question is required. 4020 Answer to Waiver question is required. 4021 Answer to the 'Are Attachments being filed with this application' question is required. 4025 Invalid Licensee TIN. 4030 Invalid Assignee/Transferee TIN/FRN. 4035 Answer to Applicant Type question is required. 4040 Answer to Assignee/Transferee Type question is required. 4045 Name of Real Party in Interest is required. 4050 TIN of Real Party in Interest is required and must be in format 999999999 or A99999999. 4055 Licensee City is required. 4056 Assignee/Transferee City is required. 4057 Assignor/Transferor City is required. 4060 Assignee/Transferee City is required. 4061 Assignor/Transferor City is required. 4065 Licensee State is required. 4066 Assignee/Transferee State Code is required. 4067 Assignor/Transferor State Code is required. 4070 Assignee/Transferee State Code is required. 4071 Assignor/Transferor State Code is required. 4075 Licensee zip code must be 5 or 9 digits. 4076 Assignee/transferee zip code must be 5 or 9 digits. 4077 Assignor/transferor zip code must be 5 or 9 digits. 4080 Assignee/Transferee Zip Code is required. 4081 Assignor/Transferor State Code is required. 4085 Answer to "Does Applicant Wish Correspondence To Be Sent Via Email' question is required. 4087 Licensee E-Mail Address is required when answering 'Yes' to the 'Does Applicant Wish Correspondence To Be Sent Via Email' question. 4090 First name of applicant contact is required. 4095 Assignee/transferee contact first name is required. 4096 Assignor/transferor contact first name is required. 4100 Last name of applicant contact is required. 4105 Assignee/transferee contact last name is required. 4106 Assignor/transferor contact last name is required. 4110 Company name for applicant contact is required. 4115 Assignee/transferee contact company name is required. 4116 Assignor/transferor contact company name is required. 4120 City for applicant contact is required. 4125 Asignee/transferee contact city is required. 4126 Assignor/transferor contact city is required. 4130 State for applicant contact is required. 4135 Assignee/transferee contact state is required. 4136 Assignor/transferor contact state is required. 4140 Licensee contact zip code must be 5 or 9 digits. 4145 Assignee/transferee contact zip code must be 5 or 9 digits. 4146 Licensee contact phone must be 10 digits. 4147 Assignee/transferee contact phone must be 10 digits. 4148 Assignor/transferor contact zip code must be 5 or 9 digits. 4149 Assignor/transferor contact phone must be 10 digits. 4150 Answer to "Does Applicant Provide Interconnected Service' question is required. 4155 Answer "Is Applicant Exempt From FCC Application Fees' question is required. 4160 Answer to is "Applicant Exempt From FCC Regulatory Fees' question is required. 4165 Answer to Alien Ownership question 1 is required. 4170 Answer to Alien Ownership question 1 is required. 4175 Answer to Alien Ownership question 2 is required. 4180 Answer to Alien Ownership question 2 is required. 4185 Answer to Alien Ownership question 3 is required. 4190 An answer to Alien Ownership question 3 is required. 4195 Answer to Alien Ownership question 4 is required. 4200 Answer to Alien Ownership question 4 is required. 4205 Answer to Alien Ownership question 5 is required. 4210 Answer to Alien Ownership question 5 is required. 4215 Answer to Basic Qualification question 1 is required. 4220 Answer to Basic Qualification question 1 is required. 4225 Answer to Basic Qualification question 2 is required. 4230 Answer to Basic Qualification question 2 is required. 4235 Answer to Basic Qualification question 3 is required. 4240 Answer to Basic Qualification question 3 is required. 4245 Answer to Basic Qualification question 4 is required. 4250 Answer to Basic Qualification question 4 is required. 4255 Certifier first name is required. 4260 Assignee/transferee certifier first name is required. 4265 Certifier last name is required. 4270 Assignee/transferee certifier last name is required. 4275 Certifier title is required. 4280 Assignee/transferee certifier title is required. 4285 Receipt Date is required. 4290 Assignee/transferee certifier date is required. 4295 Answer to Pro Forma question is required. 4300 Answer to Partition/Disaggregation question is required. 4305 Invalid Licensee TIN. 4310 Transferor TIN is required and must be in format 999999999 or A99999999. 4315 An answer to 'How will the Transfer of Control be accomplished?' question is required. 4320 Answer to 'How will the Assignment of Authorization be Accomplished?' question is required. 4325 Answer to 'Transfer of Control is Voluntary/Involuntary?' question is required. 4330 Answer to 'Assignment of Authorization is Voluntary/Involuntary?' question is required. 4335 Invalid Assignee TIN. 4340 Certifier first name is required. 4345 Assignor/Transferor Certifier first name is required. 4350 Certifier last name is required. 4355 Assignor/Transferor Certifier last name is required. 4360 Certifier title is required. 4365 Assignor/Transferor Certifier title is required. 4370 Certification date is required. 4375 Assignee certification date is required. 4380 Either Transferred Call sign or File Number is required. 4385 Either Assigned Call sign or File Number is required. 4390 Answer to 'Constructed Yes/No?' question is required. 4395 Answer to 'Is Assignee claiming same or smaller category of eligibilty for installment payments as Assignor?' question is required. 4400 Answer to 'If Yes, is Assignee applying for installment payments' question is required. 4405 Either a Defined Area or an Undefined Area is required in order to Partition a market. 4410 If a market is partitioned, population of the paritioned area must be specified. 4415 Either a Defined or Undefined area to partition or spectrum to disaggregate is required. 4420 A partition coverage option must be specified. 4425 A disaggregation coverage option must be specified. 4430 Schedule C must be completed if an Undefined Area (Item 3) is selected for partitioning. 4435 Invalid location number for license. 4445 Latitude degrees are required and must be between 0 and 72 if latitude direction equals N(orth) and between 11 and 14 if latitude direction equals S(outh). 4446 Latitude minutes are required and must be between 0 and 59. 4447 Latitude seconds are required and must be between 0 and 59.9. 4448 Latitude direction is required and must be either N or S. 4450 Longitude degrees are required and must be between 64 and 180 if longitude direction equals W(est) and between 130 and 180 if longitude direction equals E(ast) . 4451 Longitude minutes are required and must be between 0 and 59. 4452 Longitude seconds are required and must be between 0 and 59.9. 4453 Longitude direction is required and must be either E or W. 4455 Location address is required. 4460 Location city is required. 4465 Location county name is required. 4470 Location state is required and must be a valid state code. 4475 A valid antenna registration number is required. 4476 A valid Form 854 file number is required. 4480 Site elevation AMSL is required and must be between -86.0 and +6194.0 (meters). 4481 Site elevation AMSL is required and must be between -152.0 and +6248.0 (meters). 4485 Overall height AGL of antenna, without appurtenances, is required and must be between -100.0 and +1000.0 (meters). 4486 Overall height AGL of antenna, without appurtenances, is required and must be between -152.0 and +610.0 (meters). 4490 Overall height AGL of antenna, with appurtenances, is required and must be between -100.0 and +1000.0 (meters). 4491 Overall height AGL of antenna, with appurtenances, is required and must be between -152.0 and +610.0 (meters). 4495 Antenna structure support type is required and must be a valid antenna structure support type. 4500 Either a tower registration number or N/A is required. 4505 NEPA question must be answered for News and Modifications. 4510 Quiet Zone Notification Date must be a valid date in mm/dd/yy format and cannot be a future date. 4515 Invalid control point number for license. 4520 Street address is required for control point. 4525 City or town is required for control point. 4530 Control point county name is required and must be a valid county for state. 4535 Control point state is required and must be a valid state code. 4540 Control point telephone number must be 10 digits. 4545 Invalid location number for license. 4550 Invalid antenna number for location. 4555 Height to tip of antenna AGL is required and must be between -100.0 and +1000.0 (meters). 4556 Height to tip of antenna AGL is required and must be between 0 and 61 (meters). 4557 Height to tip of antenna AGL is required and must be between 0 and 10 (meters). 4558 Height to tip of antenna AGL is required for Offshore Radiotelephone Services and must be valid for station class. 4560 Height of center of radiation AAT is required and must be between -1000.0 and +6194.0 (meters). 4565 Beamwidth of main lobe is required and must be between 0.1 and 359.9 degrees for a directional antenna and 360 degrees for an omni-directional antenna. 4570 Antenna gain is required and must be between -10 and 100 (dB). 4571 Antenna gain is required and must be between -10 and 85 (dB). 4574 Azimuth of Antenna is required and must be between 0 and 360. 4575 Azimuth of Antenna is Required: Azimuth to RX Location or Passive Repeater must be between 0 and 360 or 999. Azimuth to RX Location or Next Passive Repeater must be between 0 and 359.9. 4580 Invalid frequency for class of station or frequency not in format 999999.99999. 4585 Valid class of station for radio service code is required. 4590 Maximum transmitting ERP is required and must be valid ERP for frequency and station class. 4595 Transmitter output power is required and must be between 0 and +3500 (watts) . 4600 Emission designator entered is a standard emission designator. 4605 Height of center of radiation AAT is required and must be between -6194.0 and +6194.0 (meters). 4610 Radial ERP is required and must not the exceed maximum transmitting ERP for frequency. 4615 Point of Communication city is required. 4620 Valid Point of Communication state is required. 4625 Valid Point of Communication frequency is required and must be in format of 999999.99999. 4630 Point of Communication latitude degrees are required and must be between 0 and 72 if longitude direction equals N(orth) and between 11 and 14 if longitude direction equals S(outh) . 4631 Point of Communication latitude minutes are required and must be between 0 and 59. 4632 Point of Communication latitude seconds are required and must be between 0 and 59.9. 4633 Point of Communication latitude direction is required and must be either N or S. 4635 Point of Communication longitude degrees are required and must be between 64 and 180 if longitude direction equals W(est) and between 130 and 180 if longitude direction equals E(ast) . 4636 Point of Communication longitude minutes are required and must be between 0 and 59. 4637 Point of Communication longitude seconds are required and must be between 0 and 59.9. 4638 Point of Communication longitude direction is required and must be either E or W. 4640 Point of Communication Call Sign is required. 4645 At least one control point is required for each license. 4650 At least one location is required for each license. 4655 At least one antenna is required for each location. 4660 At least one frequency is required for each antenna. 4665 Radial data is required for each frequency. 4670 Points of Communication are required for station classes FXCT, FXTS, FXRP, FXRX, and FXSB. 4675 Partitioning & Disaggregation lower frequency is required, must be in format 99999.99999, and must be valid for radio service code. 4680 Partitioning & Disaggregation upper frequency is required, must be in format 99999.99999, and must be valid for radio service code. 4685 Market partition coordinate latitude degrees are required and must be between 0 and 72 if longitude direction equals N(orth) and between 11 and 14 if longitude direction equals S(outh) . 4686 Market partition coordinate latitude minutes are required and must be between 0 and 59. 4687 Market partition coordinate latitude seconds are required and must be between 0 and 59.9. 4688 Market partition coordinate latitude direction is required and must be either N or S. 4689 Market partition coordinate longitude degrees are required and must be between 64 and 180 if longitude direction equals W(est) and between 130 and 180 if longitude direction equals E(ast) . 4690 Market partition coordinate longitude minutes are required and must be between 0 and 59. 4691 Market partition coordinate longitude seconds are required and must be between 0 and 59.9. 4692 Market partition coordinate longitude direction is required and must be either E or W. 4695 Market partition population is required. 4700 Partitioning & Disaggregation lower frequency must be less than upper frequency. 4701 Partitioning & Disaggregation spectrum block is redundant with existing spectrum block on application. 4705 Invalid market partition. 4710 Invalid market partition for selected call sign. 4715 Duplicate market partition exists for this call sign. 4720 Insufficient time lapsed between original license grant and application. 4725 Undefined market partition(s) require review. 4730 Market partition is in conflict with a previously received Assignment of Authorization. 4735 Callsign has been selected in previously received Assignment of Authorization. 4740 Disaggregated spectrum is not valid for call sign. 4745 Disaggregated spectrum is in conflict with previously received Assignment of Authorization. 4750 The original market of the license is not a valid market partition. 4755 The selected market partition has been previously partitioned. 4760 Partition coverage option is required. 4765 Disaggregation coverage option is required. 4770 A minimum of three coordinates is required for each undefined partition. 4775 Application receipt date is required. It must be a valid date (in mm/dd/yy format) and cannot be greater than today's date. 4780 Call signs to be partitioned/disaggregated cannot be from multiple auctions. 4785 Partitioning/Disaggregation data is required for this callsign. 4790 At least one attachment is required for this application and the response to the attachment question must be 'Yes'. 4795 Callsigns to be partitioned/disaggregated are required. 4800 Expiration date must be valid date in mm/dd format. 4805 Area of operation code is required. 4810 Radius of operation is required. 4815 Location north of line A is required. 4820 Location east of line C is required. 4825 Area of operation text is required. 4830 Maximum Latitude degrees are required and must be between 0 and 90. 4831 Maximum Latitude minutes are required and must be between 0 and 59. 4832 Maximum Latitude seconds are required and must be between 0 and 59.9. 4833 Maximum Latitude direction is required and must be either N or S. 4834 Maximum Longitude degrees are required and must be between 64 and 180 if longitude direction equals W(est) and between 130 and 180 if longitude direction equals E(ast) . 4835 Maximum Longitude minutes are required and must be between 0 and 59. 4836 Maximum longtitude seconds are required and must be between 0 and 59.9. 4837 Maximum Longitude direction is required and must be either E or W. 4840 Location name is required. 4845 Sub-Type of Operation Code is required. 4850 Path code is required and must be valid for type of operation. 4855 Antenna make is required. 4860 Antenna model is required. 4865 Diversity antenna height AGL must be between -100 and +1000. 4870 Diversity antenna beamwidth must be between 0 and 360. 4875 Diversity antenna gain must be between -10 and +85. 4880 Elevation (tilt) angle is required and must be between -90 and +90. 4885 Polarization is required and must be valid value. 4890 Periscope reflector height must be between 1.0 and 20.0. 4895 Periscope reflector width must be between 1.0 and 20.0. 4900 Periscope reflector separation must be between 0 and 1000.0. 4905 The answer to 'Does the path require a passive repeater' is required. 4910 The answer to 'Does filing pose interference to GSO' is required. 4915 Back-to-back TX dish gain is required and must be between -10 and +85. 4920 Back-to-back RX dish gain is required and must be between -10 and +85. 4925 Answer to the 'Has frequency coordination been completed for this application' question is required. 4930 One control point is required per license. 4935 Periscope reflector height/width or back-to-back TX/RX dish gain are required. 4940 Lower frequency is required. 4945 Upper frequency is required. 4950 Cannot specify both periscope reflector height/width and back-to-back TX/RX dish gain. 4955 Market Designator is not valid for the selected Cellular Phase. 4960 Market Number selected must be a valid market number. 4965 Sub-Market Number selected must be a valid sub-market number. 4970 Channel Block must be either A or B. 4975 Only 1 through 9 new SIDS may be requested. 4980 SIDs to be added must be valid SIDs. 4985 An Answer to the CGSA Boundary Request question is required. 4990 Distance to CGSA must be no greater than 200 km. 4995 A final receiver/passive repeater must have an associated location. 4998 A Frequency Coordination Number is required. 4999 A Frequency Coordinator Name is required. 5000 Frequency coordinator telephone number must be 10 digits. 5005 Location class code is required. 5010 An answer to 'Is application part of a pack?' is required. 5015 Pack identification number is required. 5020 Valid type of operation code is required. 5025 Valid SMSA code is required. 5030 Facility ID of parent station is required. 5035 Class of parent station is required. 5040 City of parent station's principal community is required. 5045 Valid state of principal community or state of primary operation is required 5050 All gross revenues and total assets information is required. 5055 Selection of Phase 1 or Phase 2 is required and you must select at least one market. 5060 Cellular Transmitting ERP is required and must be between 0 and 500 watts. 5065 Selected SID already exists for License. 5070 Total number of Aircraft in fleet is required. 5075 FAA Registration Number is required. 5080 An answer to 'Is application for a Fleet License' question is required for a New application. 5085 An answer to 'Is application for a portable License' question is required for a New application. 5090 An answer to the 'Classification Requested' question is required for a New application. 5095 An answer to 'Is the pro forma transaction being filed under the Commission's forbearance procedures?' is required. 5100 An answer to 'Does the application involve transfer or assignment of other wireless licenses that are not included in the application?' is required. 5105 An answer to 'Does the application involve transfer or assignment of non-wireless licenses that are not included in the application?' is required. 5110 An answer to 'Is the applicant a member of a minority group and/or female, or controlled by a minority group or women?' is required. 5111 An answer to 'Is the Assignor/Transferor a member of a minority group and/or female, or controlled by a minority group or women?' is required. 5112 An answer to 'Is the Assignee/Transferee a member of a minority group and/or female, or controlled by a minority group or women?' is required. 5113 An answer to 'Is the Licensee a member of a minority group and/or female, or controlled by a minority group or women?' is required. 5115 An answer to 'What gender is the applicant?' is required. 5116 An answer to 'What gender is the Assignor/Transferor?' is required. 5117 An answer to 'What gender is the Assignee/Transferee?' is required. 5118 An answer to 'What gender is the Licensee?' is required. 5120 An answer to 'Is the applicant Black or African-American?' is required. 5121 An answer to 'Is the Assignor/Transferor Black or African-American?' is required. 5122 An answer to 'Is the Assignee/Transferee Black or African-American?' is required. 5123 An answer to 'Is the Licensee Black or African-American?' is required. 5125 An answer to 'Is the applicant American Indian or Alaska Native?' is required. 5126 An answer to 'Is the Assignor/Transferor American Indian or Alaska Native?' is required. 5127 An answer to 'Is the Assignee/Transferee American Indian or Alaska Native?' is required. 5128 An answer to 'Is the Licensee American Indian or Alaska Native?' is required. 5130 An answer to 'Is the applicant White?' is required. 5131 An answer to 'Is the Assignor/Transferor White?' is required. 5132 An answer to 'Is the Assignee/Transferee White?' is required. 5133 An answer to 'Is the Licensee White?' is required. 5135 An answer to 'Is the applicant Native Hawaiian or Other Pacific Islander?' is required. 5136 An answer to 'Is the Assignor/Transferor Native Hawaiian or Other Pacific Islander?' is required. 5137 An answer to 'Is the Assignee/Transferee Native Hawaiian or Other Pacific Islander?' is required. 5138 An answer to 'Is the Licensee Native Hawaiian or Other Pacific Islander?' is required. 5140 An answer to 'Is the applicant Asian?' is required. 5141 An answer to 'Is the Assignor/Transferor Asian?' is required. 5142 An answer to 'Is the Assignee/Transferee Asian?' is required. 5143 An answer to 'Is the Licensee Asian?' is required. 5145 An answer to 'What is the ethnicity of the applicant?' is required. 5146 An answer to 'What is the ethnicity of the Assignor/Transferor?' is required. 5147 An answer to 'What is the ethnicity of the Assignee/Transferee?' is required. 5148 An answer to 'What is the ethnicity of the Licensee?' is required. 5150 An N Number is not permitted for a Fleet or Portable License. 5151 Do not enter the leading 'N' when entering FAA N-Number. 5155 N Number cannot be greater than 8 characters. 5160 License cannot be both Fleet and Portable. 5165 The total number of aircrafts in fleet must be greater than 1. 5170 Assignor/Transferor contact name is required. 5175 Assignee/transferee contact name is required. 5180 Either Assignor/Transferor Contact P.O. Box or Street Address is required. 5185 Either Assignee/Transferee Contact P.O. Box or Street Address is required. 5190 Invalid Assignor/Transferor Contact State and Zip Combination. 5195 Invalid Assignee/Transferee Contact State and Zip Combination. 5200 Licensee name is required. 5205 Assignor/Transferor name is required. 5210 Assignee/transferee name is required. 5215 Location number is required. 5220 Location number is invalid. 5225 Frequency range is invalid. 5230 Auctionable call signs cannot be partially assigned. 5235 Partial assignment upper frequency cannot be less than lower frequency. 5240 Partial assignment upper frequency cannot be specified without lower frequency. 5245 At least one callsign must be selected for full/partial assignment or transfer of control 5250 Assignee/Transferee TIN/SGIN cannot be the same as Assignor/Transferor TIN/SGIN for non-pro forma applications. 5255 Assignee/Transferee TIN is required. 5260 Combination of type of operation code and station class is invalid for this radio service. 5265 An answer to the 'Cumulative Mod' question is required for Modification applications, Renew Modification applications, and Amendments of currently pending applications. 5270 Tolerance is required and must be between 0.00001 and 0.05 percent. 5275 Transmitter Power EIRP is required and must be between -20 and +85. 5280 A valid emission designator is required and must be valid for entered frequencies. 5285 Digital Modulation Rate is required and must be valid for entered frequencies. 5290 Digital Modulation Type is required and must be valid for entered frequencies. 5295 Transmitter Manufacturer is required. 5300 Transmitter Model is required. 5305 Automatic Transmitter Power Control is required (Yes or No). 5310 A user assigned passive repeater sequence number is required. 5315 Upper frequency must be higher than lower/center frequency. 5320 Lower/center frequency is not valid for radio service code. 5325 Frequency range is not valid for radio service code. 5330 Bandwidth portion of emission designator cannot contain spaces or decimals. 5335 Emission code portion of emission designator cannot contain spaces. 5340 Bandwidth portion of emission designator cannot contain more than one alpha character. 5345 Bandwidth portion of emission designator cannot contain an alpha character in the first position. 5350 Bandwidth portion of emission designator cannot contain alphanumeric characters other than H,K,M, or G. 5360 Path requires a matching path with valid path type code. 5365 At least one path requiring a matching path is missing its pair. 5370 Answer to 'Is there an associated parent station' is required. 5375 Fee control number cannot be less than 16 digits. 5380 At least one frequency is required for each path. 5385 Emission code is invalid. 5390 The Tower registration number entered is either invalid or not current. 5395 Latitude coordinates cannot differ by more than 1 second from the latitude on record for the specified Antenna Structure. Modification by more than 1 second requires a new FAA study and modification of the Antenna Structure Registration. 5400 Longitude coordinates cannot differ by more than 1 second from the longitude on record for the specified Antenna Structure. Modification by more than 1 second requires a new FAA study and modification of the Antenna Structure Registration. 5405 Ground elevation cannot differ by more than plus 0.5 meters/minus 3 meters from that on record for the specified structure. Modification in excess of these tolerances requires a new FAA study and modification of the Antenna Structure Registration. 5410 Overall height AGL without appurtenances cannot exceed overall height AGL with appurtenances. 5415 Overall height with appurtenances cannot differ by more than 0.3 meters from the data on record for the specified Antenna Structure. Modification by 0.3 meters or more requires a new FAA study and modification of the Antenna Structure Registration. 5420 Receiver Call Sign is required. 5425 This structure appears to require registration with the FCC. The structure owner must obtain FAA clearance and file FCC Form 854 to register the structure. 5430 This structure appears to require registration with the FCC. The structure owner must obtain FAA clearance and file FCC Form 854 to register the structure. 5435 Tolerance exceeds maximum allowed for radio service code and frequency. 5440 Power eirp exceeds maximum allowed for for radio service code and frequency. 5445 Transmitter antenna height to center cannot exceed location overall structure height. 5450 Diversity antenna height cannot exceed location overall structure height. 5455 A Fixed Point-to-Point license requires at least 1 receiver location. 5460 This new application cannot be submitted until the pending applications have been resolved. 5465 You may continue submitting, but you should verify that all proposed changes to your license are consistent. 5470 At least one emission designator is required per frequency. 5475 Path sequence number is required. 5480 Path sequence number is invalid. 5485 Path sequence number is not allowed for this radio service code. 5490 Location sequence number is not allowed for this radio service code. 5495 Height of center radiation AAT cannot exceed location overall structure height. 5500 Transmitter antenna height to tip cannot exceed location overall structure height. 5505 Maximum latitude must be north of minimum latitude. 5510 Maximum longitude must be west of minimum longitude. 5515 There are one or more STA licenses included on this application. Submission of an EX or NT application with STA license(s) present is not permitted. 5565 Number of waiver requests is required. 5600 Requested vanity call sign is required. 5601 Relationship to the deceased license holder is required for this vanity eligibility. 5602 An answer to 'Is this a request to change a call sign systematically?' is required. 5603 Call signs cannot contain spaces, symbols, or punctuation. 5604 Requests for a new Amateur call sign must be filed through a VEC. 5605 Location state code requires military address. 5606 With the exception of Club vanity requests, Clubs, Military Recs, and RACES must file all applications through their administrator. 5610 Licensee state code requires military address. 5615 Assignor state code requires military address. 5620 Assignee state code requires military address. 5625 Licensee contact state code requires military address. 5630 Assignor/transferor contact state code requires military address. 5635 Assignee/transferee contact state code requires military address. 5640 Broadcast auxiliary state code requires military address. 5645 Point of com state code requires military address. 5650 Passive repeater sequence id must be unique for a given path. 5660 The selected radio service code is not valid for this license. 5665 Number of waiver requests is required. 5670 Answer to proposal to operate in an area that requires coordination with Canada is required. 5675 Nonstandard structure type is required. 5680 Nonstandard structure type is not valid. 5685 Frequency Coordination Date may not be a future date. 5690 An entry of a fixed location number is required for an area of operation code of A. It must be a valid fixed location number for your license. 5695 For Radio Service Code CG, Station Classes FBGS and FBSI, and frequency range 454.675 - 455.000, the Max erp must be between 50 and 100 watts. 5700 Adding or modifying a Temporary Fixed location requires specifying at least one antenna and providing the antenna height to tip (in meters). Please use a 'typical' value, one that is representative of what will be contained within the system. 5705 If any one of Transmit Diversity Antenna Height, Transmit Diversity Antenna Beamwidth, or Transmit Diversity Antenna Gain is entered, all must be entered. 5710 If any one of Transmit Periscope Reflector Height, Transmit Periscope Reflector Width, or Transmit Periscope Reflector Separation is entered, all must be entered. 5715 A valid Channel Block (1-10) must be selected for each Commercial Air-ground location. 5720 A Microwave license requires at least one path. 5725 A Microwave license requires a transmit location. 5730 Broadcast Auxiliary information is required for this radio service code. 5735 This application cannot be submitted because the application you are attempting to amend is no longer pending. 5740 Frequency Coordination Date must be in format of MM/DD/YY. 5745 Valid entries for Site Status are P(rimary), S(econdary), or null. 5750 Eligibility Rule Section is required and must be a valid rule section for the entered radio service code. 5755 A Slow Growth attachment is required. 5760 The associated call sign you have entered is not a valid ULS callsign. All entered associated call signs must be valid ULS call signs. 5765 Antenna HAAT(height above average terrain) is required and must be between -1524 and +3048 meters. 5770 Carrier frequency is not a valid frequency. 5775 Number of Units is required and must be greater than zero. 5780 Count of mobile pagers is required. 5785 Type of location is required. 5790 An answer to the 'Applicant is a:' question is required if there is no associated parent station. 5795 Landmobile licenses are subject to a limit of 6 'Fixed' locations. That limit has been reached; no more fixed locations may be added to your license. 5800 Area of Operation Code of 'X' is required and only valid for a Location Description of 6.1 Meter Control Station. 5805 Site Status is required for this radio service code/frequency/station class combination. 5810 If latitude direction is N(orth), then latitude degrees must be between 0 and 72. 5815 If latitude direction is S(outh) OR state is AS (American Samoa), then only the following conditions are valid: latitude direction must = S(outh), latitude degrees must be between 11 and 14, and state, if present, must be AS (American Samoa). 5820 If longitude direction is E(ast) OR state is GU, MP, or UM, only the following conditions are valid: longitude direction must = E, longitude degrees must be between 130 and 180, and state, if present, must be GU, MP, or UM. 5825 If longitude direction is W(est), then longitude degrees must be between 64 and 180. 5830 If latitude direction is N(orth), then maximum latitude degrees must be between 0 and 72. 5835 If latitude direction is S(outh), then maximum latitude degrees must be between 11 and 14 and state, if present, must be AS (American Samoa). 5840 If longitude direction is W(est), then maximum longitude degrees must be between 64 and 180 and state, if present, must be GU (Guam), MP (North Mariana Island), or UM (United States Minor Islands). 5845 If longitude direction is W(est), then maximum longitude degrees must be between 64 and 180 and state, if present, must be GU (Guam), MP (North Mariana Island), or UM (United States Minor Islands). 5850 An attachment is required for applications that have not been successfully coordinated. 5855 A Slow Growth attachment is required. 5860 The entered Associated Call Sign is a duplicate of an existing Associated Call Sign for this license. 5865 Site status must be 'P' for the designated radio service code. 5870 Site Status must be 'P' for radio service codes IK and YK and assigned frequencies less than 470 MHz. 5875 The only valid Area of Operation Code for radio service code NC is N(ationwide, including Hawaii, Alaska, and U.S. Territories). 5880 Location Description must be FX, IT, or TF for assigned frequencies in the 929.0 to 930.0 MHz range. 5885 AAT must be equal to or less than 31 meters for radio service codes IK and YK where the assigned frequency is in the 470-512 MHz range and station class is FX1 5890 AAT must be equal to or less than 914 meters for radio service codes IK and YK where the assigned frequency is in the 470-512 MHz range and station class starts with FB. 5895 Beamwidth is required for all frequencies below 27.5 MHz. 5900 Polarization is required for all frequencies below 27.5 MHz. 5905 Gain is required for all frequencies below 27.5 MHz. 5910 Entry in at least one of the following fields is required: Azimuth, Beamwidth, Polarization, or Gain for RP radio service code and a fixed location. 5915 Azimuth is required for all frequencies below 27.5 MHz. 5920 Eligibility Rule Section must begin with 74 for radio service codes LP and RP 5925 Eligibility Rule Section must begin with 90 for radio service codes other than LP and RP 5930 Invalid frequency for Station Class of FX3 5935 If 601 Main Form Item 37 - Interconnected - equals 'Y', then Station Class must end with a 'C', 'J', 'K' or 'L'. 5940 A location must be a fixed location for frequencies in the 470-512 MHz range and a station class of FX1. 5945 Station Classes for Itinerant Locations must end with an 'I' or a 'L'. 5950 Station Classes for Temporary Fixed Locations must end with an 'T' or a 'J'. 5955 Station Classes for 6.1 meter control stations must equal 'FX1', 'FX1C', 'FX1S', or 'FX1K'. 5960 For frequencies below 25 MHz, station class cannot begin with 'FB2'. 5965 For Radio Service Code PW, output power must be between 3,500 and 7,500 watts. 5970 If frequency = 806-821 or 866-869 MHz, and location description is MO, IT, TF, or 6.1, and station class is FX1, FXK, FX1T, FX1J, FX1I, FX1L, FX1S, FX1K, or begins with MO, then outpout power must be between 0 and 100 watts. 5975 If frequency is 25-50 MHz, then maximum output power is 300 watts. 5980 If frequency is 72-76 MHz and Location Description is MO (mobile only), then output power is limited to 1 watt. 5985 If frequency is 806-824 MHz, then maximum output power is 100 watts. 5990 If frequency is 896-901 MHz, then maximum output power is 100 watts. 5995 If frequency is a discrete frequency in the 421-430 MHz band and the 1st two positions of station class equal 'FX', then output power cannot exceed 20 watts. 6000 ERP is required and must be greater than zero (0) for frequencies operating above 10 MHZ. 6005 If frequency is 72-76 MHz and location description is FX(fixed), then maximum ERP is 300 watts. 6010 If frequency is 150-174 MHz, then maximum ERP is 500 watts. 6015 If frequency is 421-430 MHz, then maximum ERP is 250 watts. 6020 If frequency is 450-470 MHz, then maximum ERP is 500 watts. 6025 If frequency is 470-512 MHz, then maximum ERP is 1000 watts. 6030 If frequency is 851-869 MHz, then maximum ERP is 1000 watts. 6035 If frequency is 902-927.25 MHz, then maximum ERP is 30 watts. 6040 If frequency is 927.25-928 MHz, then maximum ERP is 300 watts. 6045 If frequency is 929 MHz, then maximum ERP is 3,500 watts. 6050 If frequency is 935-940 MHz, then maximum ERP is 1,000 watts. 6055 If radio service code is NC, QD, QO, or QT and frequency is between 221-222 MHz, then ERP cannot be greater than 50 watts. 6060 If radio service code is NC, QD, QO, or QT and the 1st two postions of station class = 'MO', then ERP cannot be greater than 50 watts. 6065 If frequency is below 25 MHz and emission is J3E, then maximum peak power is 1,000 watts. 6070 If the emission code is not PON or NON, the first character of the bandwidth must be either H or a number. 6075 Emission is not PON/NON and the first character is something other than an H or a non-zero character. 6080 Copying data to your Amendment has failed. Please contact ULS Technical Support for assistance. 6085 Carrier Frequency must be a valid frequency for radio service code. 6090 This fixed location is the corresponding location for another location and therefore cannot be deleted. 6095 Transmitter output power is required and must be greater than 0 (watts) . 6100 If the Location Description Code equals FX, then the first two positions of the Station Class must equal FB or FX, and the last position of the Station Class cannot equal I, L, J, or T. 6105 If the Location Description Code equals MO, then the first two positions of the Station Class must equal MO or MR. 6110 If the radio service code is not RS or PW, the output power of the frequency cannot be greater than 3500. 6115 The output power exceeds the maximum for the Station Class FB for this frequency and radio service code. 6120 The output power exceeds the maximum for the Station Class MO for this frequency and radio service code 6125 The output power exceeds the maximum for the Station Class FX for this frequency and radio service code 6130 The ERP exceeds the maximum for the Station Class FB for this frequency and radio service code 6135 The ERP exceeds the maximum for the Station Class MO for this frequency and radio service code 6140 The ERP exceeds the maximum for the Station Class FX for this frequency and radio service code 6145 If frequency is 806.0125-820.250 MHz, the Station Class must begin with 'MO' or 'FX'. 6150 If frequency is 806.0125-820.250 MHz and first two positions of Station Class equal 'MO', the maximum output power is 100 watts. 6155 If frequency is 806.0125-820.250 MHz and first two positions of Station Class equal 'FX', the maximum output power is 100 watts. 6160 If frequency is 851.0125-865.250 MHz, the Station Class must begin with 'MO' or 'FB'. 6165 If frequency is 851.0125-865.250 MHz and first two positions of Station Class equal 'MO', the maximum output power is 100 watts. 6170 If frequency is 851.0125-865.250 MHz and first two positions of Station Class equal 'FB', the maximum ERP is 1000 watts. 6175 If the Station Class ends with the letters C, J, K, or L, then the Type of Radio Service - Interconnected Service question must be answered 'Yes' 6180 If the radio service code is LN, and the application purpose is New or Amendment to a New, the frequency must be between 902-904 MHz or 909.750-921.750 MHz. 6185 The maximum ERP for this frequency is 5500 watts. 6190 Invalid frequency for radio service code. 6195 If the Location Description is non-fixed, then the 'AAT' field is not applicable. 6200 If the Location Description is non-fixed, then the 'antenna height' field is not applicable. 6205 If the Location Description is non-fixed, then the 'azimuth' field is not applicable. 6210 If the Location Description is non-fixed, then the 'beamwidth' field is not applicable. 6215 If the Location Description is non-fixed, then the 'polarization' field is not applicable. 6220 If the Location Description is non-fixed, then the 'gain' field is not applicable. 6225 Count Mobile Units is required. 6230 If the radio service code is LN, then the maximum antenna height is 15 meters. 6235 For the radio service codes IK and YK, the Regulatory Status must indicate Common Carrier and the Interconnect Service question must indicate Yes. 6240 For radio service codes IG and YG, if Regulatory Status is Common Carrier, then the Interconnect Service question cannot be Yes (and if the Interconnect Service question is Yes, then the Regulatory Status cannot be Common Carrier). 6245 For radio service codes GI, GU, YI, and YU, if the frequency is between 935.1375 and 939.9875 and the station class = FB, then the maximum ERP = 1000. 6250 For radio service codes GI, GU, YI, and YU, if the frequency is between 935.1375 and 939.9875 and the station class = MO, then the maximum output power = 100. 6255 For radio service code GI, GU, YI, and YU, if the freque