Skip to Main Content U.S. Department of Energy
Hydrology

Diana Bacon

Diana Bacon

Pacific Northwest National Laboratory
PO Box 999
Richland, WA 99352

Biography

Dr. Bacon has 20 years of experience in vadose zone hydrology and geochemistry. She has been a research scientist at PNNL since May, 1986, and was promoted to her current position of senior research scientist in May, 1997. Dr. Bacon is currently supporting the development of STOMP-CO2 for a CO2 Sequestration pilot project at the Mountaineer Site. In support of the Hanford Tank Low-activity Waste Glass Performance Assessment, Dr. Bacon has developed and applied a coupled nonisothermal, multiphase flow and reactive transport simulator, STORM, which runs in parallel on the EMSL supercomputers. STORM simulates the chemical weathering of many types of buried waste forms in the vadose zone, including grout, glass, steam reformer, and ceramic.

Research Interests

  • Carbon sequestration
  • Parallel computing
  • Multiphase flow and reactive transport in the vadose zone
  • Carbon cycling in the vadose zone
  • Performance assessment of radioactive waste sites

Education and Credentials

  • Ph.D., Geology, Washington State University, 1997
  • M.S., Hydrology, New Mexico Institute of Mining & Technology, Hydrology, Socorro, 1986
  • B.S., Geology, George Mason University, 1983

Affiliations and Professional Service

Selected Publications

2008

2006

  • Bacon DH, MD White, N Gupta, JR Sminchak, and ME Kelley. 2006. "Assessment of CO2 Injection Potential and Monitoring Well Location at the Mountaineer Power Plant Site." In 8th International Conference on Greenhouse Gas Control Technologies: GHGT-8, 19-22 June, 2006, Trondheim, Norway , p. 6 pages.  Elsevier Amsterdam, Amsterdam, Netherlands. 
  • Bacon DH, EM Pierce, DM Wellman, DM Strachan, and GB Josephson. 2006. Corrosion of Metal Inclusions In Bulk Vitrification Waste PackagesPNNL-15947, Pacific Northwest National Laboratory, Richland, WA. 
  • Ojovan MI, W Lee, A Barinov, IV Startsceva, DH Bacon, BP McGrail, and JD Vienna. 2006. "Corrosion of low level vitrified radioactive waste in a loamy soil." Glass Technology 47(2):48-55. 

2005

2004

2003

  • Bacon DH, and BP McGrail. 2003. "Lessons Learned From Reactive Transport Modeling of a Low-Activity Waste Glass Disposal System." Computers & Geosciences 29(2003):361-370. 
  • Bacon DH, and BP McGrail. 2003. "Waste Form Release Calculations for Performance Assessment of the Hanford Immobilized Low-Activity Waste Disposal Facility Using a Parallel, Coupled Unsaturated Flow and Reactive Transport Simulator." In 26th Materials Research Society Symposium Proceedings, vol. 757, ed. Robert J. Finch and Daniel B. Bullen, pp. 43-48.  Materials Research Society, Warrendale, PA. 
  • Bacon DH, MI Ojovan, BP McGrail, N Ojovan, and IV Startsceva. 2003. "Vitrified Waste Corrosion Rates From Field Experiment and Reactive Transport Modeling." In 9th International Conference on Radioactive Waste Management and Environmental Remediation, vol. 2, ed. Gary Benda and Fred Sheil, pp. 803-809.  American Society of Mechanical Engineers, Oxford, England. 
  • McGrail BP, DH Bacon, RJ Serne, and EM Pierce. 2003. A Strategy to Assess Performance of Selected Low-Activity Waste Forms in an Integrated Disposal FacilityPNNL-14362, Pacific Northwest National Laboratory, Richland, WA. 

2002

  • Bacon DH, and BP McGrail. 2002. Effect of Design Changes On Remote Handled Trench Waste Form Release CalculationsPNNL-13947, Pacific Northwest National Laboratory, Richland, WA. 
  • Bacon DH, BP McGrail, VL Freedman, G Ventura, PN Risoluti, and KM Krupka. 2002. "Performance Assessment of Low-Level Waste Disposal Facilities Using Coupled Unsaturated Flow and Reactive Transport Simulators." In Scientific basis for nuclear waste management XXV : symposium held November 26-29, 2001, Boston, Massachusetts; Materials Research Society symposium proceedings , vol. 713, ed. McGrail, B. P.; Cragnolino, G. A., pp. 267-274.  Materials Research Society, Warrendale, PA. 

2001

2000

1998

Hydrology

Additional Information