** Version 1.1 Notes **

Minor bugs:

1.  After using BIOCHLOR, the formula bar would not show up in Excel unless the
user went in and selected it to show.  This has been corrected by adding a line
of code to the autoclose subroutine that tells Excel to show the formula bar
when the user exits the software.

2. On the input page, if the user left the zone 1 length cell blank and pressed
the "c" button, they would get a macro error.  Now the will get the following
message: " Please enter a zone 1 length greater than 0".

3.  If the user pressed "RESET" on the input page, a formula would be pasted
into the "distance to source" section in the field data section.  Although the
user could override this with any data they chose, the default would be
increments of  model length/10.  This was an inadvertent carryover from
BIOSCREEN. Now, when the user presses "RESET", those cells are set to blank
cells.

4.  On the Natural Attenuation Scoring sheet the formulae for Carbon
tetrachloride, ethene/ethane >0.1 mg/L, and chloroform material released were
incorrect.  These have been corrected to yield the correct scores.


Major bug:

On the array page, we recently discovered that the mass balance in units of
gallons is incorrect.  The error would be obvious to the user.  It has been
corrected to yield the correct mass balance when units of gallons are used.  THe
mass balance when kg are used remains correct.