| |
 Federal Register Information
 Header Information
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39 [60 FR 29979 NO. 109 6/7/95]
Docket No. 92-CE-13-AD; Amendment 39-9256; AD 95-12-06
Airworthiness Directives; Jetstream Aircraft Limited Models 3101 and 3201 Airplanes
PDF Copy (If Available):
Preamble Information
AGENCY: Federal Aviation Administration, DOT
ACTION: Final rule
SUMMARY: This amendment adopts a new airworthiness directive (AD) that applies to certain Jetstream Aircraft Limited (JAL) Jetstream Models 3101 and 3201 airplanes. The action requires modifying the shear fitting at the top of each escape hatch. A report of interference between the shear fitting on an escape hatch and a ceiling panel found while removing the escape hatch on one of the affected airplanes prompted this AD. The actions specified by this AD are intended to prevent the inability to utilize an escape hatch during an emergency situation because of interference.
DATES: Effective July 24, 1995.
The incorporation by reference of certain publications listed in the regulations is approved by the Director of the Federal Register as of July 24, 1995.
ADDRESSES: Service information that applies to this AD may be obtained from Jetstream Aircraft Limited, Manager Product Support, Prestwick Airport, Ayrshire, KA9 2RW Scotland; telephone (44-292) 79888; facsimile (44-292) 79703; or Jetstream Aircraft Inc., Librarian, P.O. Box 16029, Dulles International Airport, Washington, DC 20041-6029; telephone (703) 406-1161; facsimile (703) 406-1469. This information may also be examined at the Federal Aviation Administration (FAA), Central Region, Office of the Assistant Chief Counsel, Room 1558, 601 E. 12th Street, Kansas City, Missouri 64106; or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.
FOR FURTHER INFORMATION CONTACT: Mr. Raymond A. Stoer, Program Officer, Brussels Aircraft Certification Office, FAA, Europe, Africa, and Middle East Office, c/o American Embassy, B-1000 Brussels, Belgium; telephone (322) 513.3830; facsimile (322) 230.6899; or Mr. Sam Lovell, Project Officer, Small Airplane Directorate, Airplane Certification Service, FAA, 1201 Walnut, suite 900, Kansas City, Missouri 64106; telephone (816) 426-6934; facsimile (816) 426-2169.
SUPPLEMENTARY INFORMATION: A proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an AD that would apply to certain JAL Models 3101 and 3201 airplanes was published in the Federal Register on February 10, 1995 (60 FR 7921). The action proposed to require modifying the shear fitting at the top of each escape hatch. Accomplishment of the proposed action would be in accordance with the ACCOMPLISHMENT INSTRUCTIONS section of Jetstream Service Bulletin 52-JM 7752, dated December 17, 1991.
Interested persons have been afforded an opportunity to participate in the making of this amendment. No comments were received on the proposed rule or the FAA's determination of the cost to the public.
After careful review of all available information related to the subject presented above, the FAA has determined that air safety and the public interest require the adoption of the rule as proposed except for minor editorial corrections. The FAA has determined that these minor corrections will not change the meaning of the AD and will not add any additional burden upon the public than was already proposed.
The FAA estimates that 120 airplanes in the U.S. registry will be affected by this AD, that it will take approximately 3 workhours per airplane to accomplish the required action, and that the average labor rate is approximately $60 an hour. Rework of existing parts costs approximately $165 per airplane. Based on these figures, the total cost impact of this AD on U.S. operators is estimated to be $41,400. This figure is based on the assumption that no affected owner/operator has accomplished the required modification. The FAA has no way of determining how many airplanes have incorporated this modification (reworked the existing parts), but anticipates that numerous operators have already reworked the existing parts. This would reduce the cost impact of this AD on U.S. operators.
The regulations adopted herein will not have substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, in accordance with Executive Order 12612, it is determined that this final rule does not have sufficient federalism implications to warrant the preparation of a Federalism Assessment.
For the reasons discussed above, I certify that this action (1) is not a "significant regulatory action" under Executive Order 12866; (2) is not a "significant rule" under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A copy of the final evaluation prepared for this action is contained in the Rules Docket. A copy of it may be obtained by contacting the Rules Docket at the location provided under the caption "ADDRESSES".
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.
Adoption of the Amendment
Accordingly, pursuant to the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:
PART 39 - AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. App. 1354(a), 1421 and 1423; 49 U.S.C. 106(g); and 14 CFR 11.89.
Section 39.13 - [AMENDED]
2. Section 39.13 is amended by adding a new airworthiness directive to read as follows:
Regulatory Information
95-12-06 JETSTREAM AIRCRAFT LIMITED: Amendment 39-9256; Docket No. 92-CE- 13-AD.
Applicability: Jetstream Models 3101 and 3201 airplanes (serial numbers 757 through 912), certificated in any category.
NOTE 1: This AD applies to each airplane identified in the preceding applicability provision, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must use the authority provided in paragraph (d) of this AD to request approval from the FAA. This approval may address either no action, if the current configuration eliminates the unsafe condition, or different actions necessary to address the unsafe condition described in this AD. Such a request should include an assessment of the effect of the changed configuration on the unsafe condition addressed by this AD. In no case does the presence of any modification, alteration, or repair remove any airplane from the applicability of this AD.
Compliance: Required within the next 50 hours time-in-service after the effective date of this AD, unless already accomplished.
To prevent occupant injury during an emergency situation because of the inability to remove an escape hatch, accomplish the following:
(a) For both Models 3101 and 3201 airplanes, modify the shear fitting at the top of the right-hand escape hatch in accordance with PART A of the ACCOMPLISHMENT INSTRUCTIONS section of Jetstream Service Bulletin (SB) 52-JM 7752, dated December 17, 1991.
(b) For Model 3201 airplanes, modify the shear fitting at the top of the left-hand escape hatch in accordance with PART B of the ACCOMPLISHMENT INSTRUCTIONS section of Jetstream SB 52-JM 7752, dated December 17, 1991.
(c) Special flight permits may be issued in accordance with sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate the airplane to a location where the requirements of this AD can be accomplished.
(d) An alternative method of compliance or adjustment of the compliance times that provides an equivalent level of safety may be approved by the Manager, Brussels Aircraft Certification Office (ACO), FAA, Europe, Africa, and Middle East Office, c/o American Embassy, B-1000 Brussels, Belgium. The request should be forwarded through an appropriate FAA Maintenance Inspector, who may add comments and then send it to the Manager, Brussels ACO.
NOTE 2: Information concerning the existence of approved alternative methods of compliance with this AD, if any, may be obtained from the Brussels ACO.
(e) The modification required by this AD shall be done in accordance with Jetstream Service Bulletin 52-JM 7752, dated December 17, 1991. This incorporation by reference was approved by the Director of the
Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be obtained from Jetstream Aircraft Limited, Manager Product Support, Prestwick Airport, Ayrshire, KA9 2RW Scotland; or Jetstream Aircraft Inc., Librarian, P.O. Box 16029, Dulles International Airport, Washington, DC, 20041-6029. Copies may be inspected at the FAA, Central Region, Office of the Assistant Chief Counsel, Room 1558, 601 E. 12th Street, Kansas City, Missouri, or at the Office of the Federal Register, 800 North Capitol Street, NW., suite 700, Washington, DC.
(f) This amendment becomes effective on July 24, 1995.
Footer Information
Comments
|