From gilg@lbl.gov Tue Jan 21 16:37:23 2003
Date: Tue, 21 Jan 2003 16:35:41 -0800 (PST)
From: Murdock Gilchriese <gilg@lbl.gov>
To: SCT hybrid/module at LBL <chtran@lbl.gov>,
    Alessandra Ciocio <A_Ciocio@lbl.gov>,
    Steve Dardin <SMDardin@lbl.gov>,
    Vitaliy Fadeyev <VAFadeyev@lbl.gov>,
    Murdock Gilchriese <gilg@sts.lbl.gov>,
    Fred Goozen <FRGoozen@lbl.gov>,
    Carl Haber <chhaber@lbl.gov>,
    jasnow@lbl.gov,
    Jeremey Lys <jelys@lbl.gov>,
    Frank McCormack <fjmccormack@lbl.gov>,
    rapowers@lbl.gov,
    Rhonda Witharm <RMWitharm@lbl.gov>
Cc: bill@scipp.ucsc.edu,
    Felix Rosenbaum <felix@scipp.ucsc.edu>,
    Alex Grillo <grillo@scipp.ucsc.edu>,
    Mark Anderson <mark@scipp.ucsc.edu>,
    Abe Seiden <abs@scipp.ucsc.edu>
Subject: SCT "minutes" week of Jan. 20

Here are some partial minutes for the last week. Next full meeting on Jan.
27.

The summary files are at
http://www-physics.lbl.gov/~gilg/SCTWeeklyMeetings/Jan212003/

For some reason the channel summary is very large now. Vitaliy created a
start on a Z metrology summary, which is at the above. He is working on
IVs. Hope to add this next week. Note that I'm taking the
hybrids-started, hybrid-up-to-fanout and modules with testing complete
from Sandra's spreadsheet(unlike last week), so counts might have been off
last week.

Hybrids started as of end last week	58	In last week 	5
Hybrids up to fanout bonds		37	In last week    1

Modules started as of end last week	14	In last week 	2
Modules test complete			 3	In last week    1

Cleanroom
We are back in operation after multiple water leaks. One was repaired. The
second will be repaired but leak only occurs with lots of water in
drainage well external to the building. This hopefully wont occur before
the repair is made. But we lost some time last week.

Hybrids
16 more arrived and look fine. Chips arrived. Visual inspection done and
all look OK to use. Co started today on this batch and should be mounting
chips at about 2 hybrids per day. 

Module assembly
P11 - bonded with hybrid, ready for IV in cleanroom today, then put in
test box.

P12 - same

P13 - ready for bonding today, then metrology(reverse usual order to avoid
conflict with SmartScope) and then IV 

P14 - metrology(no hybrid) completed, meets specs. IV done. Hybrid attach
starting today.

P15 - hope to start one side today using fixture A1

A0 fixture initial qualification was completed today and backside of D31
will be glued today. 

Ready to start A2 qualification but limited by vacuum line availability.
Have new A2 plate from UK. Bearings to be replaced.

Drawing package to make more metrology fixtures being completed by Carl.

Robert assembled three more test boxes with connectors for P11-13.

Module bonding has priority. If time allows Rhonda will work on ordering
bonder supplies and getting bonders #2 and #3 up.

Rhonda talked to Mark at UCSC on Friday about what fixtures UCSC needs.
Will follow up(and with Gil).

Personnel schedule. Gil will circulate request for people to give him
their schedules from now through March. Will update this weekly, or as
needed.