Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.31.12-174.2.22.fc12.i686 (mockbuild@x86-04.phx2.fedoraproject.org) (gcc version 4.4.3 20100127 (Red Hat 4.4.3-4) (GCC) ) #1 SMP Fri Feb 19 19:26:06 UTC 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bd6a1000 (usable) BIOS-e820: 00000000bd6a1000 - 00000000bd6a7000 (reserved) BIOS-e820: 00000000bd6a7000 - 00000000bd7b7000 (usable) BIOS-e820: 00000000bd7b7000 - 00000000bd80f000 (reserved) BIOS-e820: 00000000bd80f000 - 00000000bd8c7000 (usable) BIOS-e820: 00000000bd8c7000 - 00000000bd8d2000 (ACPI NVS) BIOS-e820: 00000000bd8d2000 - 00000000bd8d5000 (ACPI data) BIOS-e820: 00000000bd8d5000 - 00000000bd8d9000 (reserved) BIOS-e820: 00000000bd8d9000 - 00000000bd8dd000 (ACPI NVS) BIOS-e820: 00000000bd8dd000 - 00000000bd8e0000 (reserved) BIOS-e820: 00000000bd8e0000 - 00000000bd907000 (ACPI NVS) BIOS-e820: 00000000bd907000 - 00000000bd908000 (ACPI data) BIOS-e820: 00000000bd908000 - 00000000bdb0f000 (reserved) BIOS-e820: 00000000bdb0f000 - 00000000bdb9f000 (ACPI NVS) BIOS-e820: 00000000bdb9f000 - 00000000bdbff000 (ACPI data) BIOS-e820: 00000000bdbff000 - 00000000bdc00000 (usable) BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000013c000000 (usable) DMI present. last_pfn = 0xbdc00 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-DBFFF uncachable DC000-FFFFF write-protect MTRR variable ranges enabled: 0 base 13C000000 mask FFC000000 uncachable 1 base 0BE000000 mask FFE000000 uncachable 2 base 000000000 mask F80000000 write-back 3 base 080000000 mask FC0000000 write-back 4 base 100000000 mask FC0000000 write-back 5 base 0BDE00000 mask FFFE00000 uncachable 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 5056MB, range: 64MB, type UC reg 1, base: 3040MB, range: 32MB, type UC reg 2, base: 0GB, range: 2GB, type WB reg 3, base: 2GB, range: 1GB, type WB reg 4, base: 4GB, range: 1GB, type WB reg 5, base: 3038MB, range: 2MB, type UC total RAM coverred: 3998M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3038MB, range: 2MB, type UC reg 3, base: 3040MB, range: 32MB, type UC reg 4, base: 4GB, range: 1GB, type WB reg 5, base: 5056MB, range: 64MB, type UC x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000bde00000 - 0000000100000000 (usable) ==> (reserved) initial memory mapped : 0 - 01000000 init_memory_mapping: 0000000000000000-00000000373fe000 Using x86 segment limits to approximate NX protection 0000000000 - 0000400000 page 4k 0000400000 - 0037000000 page 2M 0037000000 - 00373fe000 page 4k kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 374be000 - 37fef02f Allocated new RAMDISK: 00acd000 - 015fe02f Move RAMDISK from 00000000374be000 - 0000000037fef02e to 00acd000 - 015fe02e ACPI: RSDP 000f6690 00024 (v02 LENOVO) ACPI: XSDT bdb5a0d2 00094 (v01 LENOVO TP-6H 00001060 LTP 00000000) ACPI: FACP bdb5a200 000F4 (v04 LENOVO TP-6H 00001060 LNVO 00000001) ACPI: DSDT bdb5a5db 0D59C (v01 LENOVO TP-6H 00001060 MSFT 03000000) ACPI: FACS bdb8e000 00040 ACPI: SSDT bdb5a3b4 00227 (v01 LENOVO TP-6H 00001060 MSFT 03000000) ACPI: ECDT bdb67b77 00052 (v01 LENOVO TP-6H 00001060 LNVO 00000001) ACPI: APIC bdb67bc9 00078 (v01 LENOVO TP-6H 00001060 LNVO 00000001) ACPI: MCFG bdb67c41 0003C (v01 LENOVO TP-6H 00001060 LNVO 00000001) ACPI: HPET bdb67c7d 00038 (v01 LENOVO TP-6H 00001060 LNVO 00000001) ACPI: SLIC bdb67dc2 00176 (v01 LENOVO TP-6H 00001060 LTP 00000000) ACPI: BOOT bdb67f38 00028 (v01 LENOVO TP-6H 00001060 LTP 00000001) ACPI: ASF! bdb67f60 000A0 (v16 LENOVO TP-6H 00001060 PTL 00000001) ACPI: SSDT bdb8c4a2 00972 (v01 LENOVO TP-6H 00001060 INTL 20050513) ACPI: TCPA bd907000 00032 (v00 00000000 00000000) ACPI: SSDT bd8d4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: SSDT bd8d3000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT bd8d2000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 2152MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 0 - 373fe000 node 0 low ram: 00000000 - 373fe000 node 0 bootmap 0000a000 - 00010e80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000400000 - 0000ac7a30] TEXT DATA BSS ==> [0000400000 - 0000ac7a30] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #5 [0000ac8000 - 0000acc138] BRK ==> [0000ac8000 - 0000acc138] #6 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000] #7 [0000acd000 - 00015fe02f] NEW RAMDISK ==> [0000acd000 - 00015fe02f] #8 [000000a000 - 0000011000] BOOTMAP ==> [000000a000 - 0000011000] found SMP MP-table at [c00f66d0] f66d0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x000bdc00 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x000bd6a1 0: 0x000bd6a7 -> 0x000bd7b7 0: 0x000bd80f -> 0x000bd8c7 0: 0x000bdbff -> 0x000bdc00 On node 0 totalpages: 776200 free_area_init_node: node 0, pgdat c097c3c0, node_mem_map c15ff000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3966 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 4305 pages used for memmap HighMem zone: 545691 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 14 pages at c2dc7000, static data 34428 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 770127 Kernel command line: ro root=/dev/mapper/vg_rickfc12-lv_root noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 allocated 15544320 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups Initializing HighMem for node 0 (000373fe:000bdc00) Memory: 3044908k/3108864k available (3504k kernel code, 59016k reserved, 2177k data, 436k init, 2199984k highmem) virtual kernel memory layout: fixmap : 0xffad5000 - 0xfffff000 (5288 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc098d000 - 0xc09fa000 ( 436 kB) .data : 0xc076c1e7 - 0xc098c668 (2177 kB) .text : 0xc0400000 - 0xc076c1e7 (3504 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2526.572 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.14 BogoMIPS (lpj=2526572) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 Checking 'hlt' instruction... OK. ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 20243 entries in 40 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.53GHz stepping 0a Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5053.72 BogoMIPS (lpj=2526863) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.53GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (10106.87 BogoMIPS). sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=352 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=500 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=192 bytes sizeof(task_struct)=3256 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 9:12:41 Date: 02/26/10 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: Power Resource [PUBS] (on) ACPI: ACPI Dock Station Driver: 2 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) DMAR: Forcing write-buffer flush capability pci 0000:00:02.0: reg 10 64bit mmio: [0xf2000000-0xf23fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf2400000-0xf24fffff] pci 0000:00:03.0: reg 10 64bit mmio: [0xf2826800-0xf282680f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:03.2: reg 10 io port: [0x1828-0x182f] pci 0000:00:03.2: reg 14 io port: [0x180c-0x180f] pci 0000:00:03.2: reg 18 io port: [0x1820-0x1827] pci 0000:00:03.2: reg 1c io port: [0x1808-0x180b] pci 0000:00:03.2: reg 20 io port: [0x1810-0x181f] pci 0000:00:03.3: reg 10 io port: [0x1830-0x1837] pci 0000:00:03.3: reg 14 32bit mmio: [0xf2624000-0xf2624fff] pci 0000:00:19.0: reg 10 32bit mmio: [0xf2600000-0xf261ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xf2625000-0xf2625fff] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2826c00-0xf2826fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2620000-0xf2623fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2827000-0xf28273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f] pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f] pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47] pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2826000-0xf28267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2827400-0xf28274ff] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] pci 0000:03:00.0: reg 10 64bit mmio: [0xf2500000-0xf2501fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xf2500000-0xf25fffff] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf1ffffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf2900000-0xf29fffff] pci 0000:00:1e.0: transparent bridge pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64 PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0xbfffffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11ff has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x167f has been reserved system 00:02: ioport range 0x1680-0x169f has been reserved system 00:02: iomem range 0xe0000000-0xefffffff has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf2500000-0xf25fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: 0x2000-0x2fff pci 0000:00:1c.3: MEM window: 0xf0000000-0xf1ffffff pci 0000:00:1c.3: PREFETCH window: 0x000000f2900000-0x000000f29fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 1 mem: [0xf2500000-0xf25fffff] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff] pci_bus 0000:05: resource 1 mem: [0xf0000000-0xf1ffffff] pci_bus 0000:05: resource 2 pref mem [0xf2900000-0xf29fffff] pci_bus 0000:0e: resource 3 io: [0x00-0xffff] pci_bus 0000:0e: resource 4 mem: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 11460k freed Simple Boot Flag at 0x35 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1267175561.500:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1674 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 0 ss_did 0 pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 0 ss_did 0 pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 0 ss_did 0 pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp_glue: Slot 1 already registered by another hotplug driver ACPI: AC Adapter [AC] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button [SLPB] ACPI: SSDT bd8d7c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT bd8d5020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle Switched to high resolution mode on CPU 0 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT bd8d6ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT bd8d6f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) Switched to high resolution mode on CPU 1 ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor LNXCPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (50 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (52 C) isapnp: Scanning for PnP cards... ACPI: Battery Slot [BAT0] (battery present) isapnp: No Plug & Play device found Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Mobile IntelĀ® GM45 Express Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17) is a 16550A brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input3 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: irq 27 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci scsi5 : ahci ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 27 ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 27 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826300 irq 27 ata6: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826380 irq 27 Fixed MDIO Bus: probed ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.31.12-174.2.22.fc12.i686 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 Using IPI No-Shortcut mode PM: Resume from disk failed. registered taskstats version 1 No TPM chip found, activating TPM-bypass! Magic number: 14:50:223 rtc_cmos 00:07: setting system clock to 2010-02-26 09:12:42 UTC (1267175562) Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: TOSHIBA THNS128GG4BAAA-NonFDE, AGLA0203, max UDMA/100 ata1.00: 250069680 sectors, multi 16: LBA48 ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNS128G AGLA PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk usb 1-5: new high speed USB device using ehci_hcd and address 3 usb 1-5: New USB device found, idVendor=17ef, idProduct=100a usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 6 ports detected Clocksource tsc unstable (delta = -309395132 ns) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata2.00: ATA-7: SAMSUNG MMCRE28G8MXP-0VBL1, VBM1DL1Q, max UDMA/100 ata2.00: 250069680 sectors, multi 16: LBA48 ata2.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata2.00: configured for UDMA/100 usb 1-6: new high speed USB device using ehci_hcd and address 4 ata2.00: configured for UDMA/100 ata2: EH complete scsi 1:0:0:0: Direct-Access ATA SAMSUNG MMCRE28G VBM1 PQ: 0 ANSI: 5 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 1:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > sd 1:0:0:0: [sdb] Attached SCSI disk Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000 serio: Synaptics pass-through port at isa0060/serio1/input0 usb 1-6: New USB device found, idVendor=17ef, idProduct=480d usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-6: Product: Integrated Camera usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. usb 1-6: configuration #1 chosen from 1 choice input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 ata5: SATA link down (SStatus 0 SControl 300) usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: New USB device found, idVendor=0a5c, idProduct=2145 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II usb 4-2: Manufacturer: Lenovo Computer Corp usb 4-2: configuration #1 chosen from 1 choice usb 1-5.6: new low speed USB device using ehci_hcd and address 5 ata6: SATA link down (SStatus 0 SControl 300) Freeing unused kernel memory: 436k freed Write protecting the kernel text: 3508k Write protecting the kernel read-only data: 1696k dracut: dracut-004-4.fc12 usb 1-5.6: New USB device found, idVendor=0a81, idProduct=0205 usb 1-5.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-5.6: Product: PS2 to USB Converter usb 1-5.6: Manufacturer: CHESEN usb 1-5.6: configuration #1 chosen from 1 choice udev: starting version 145 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.0/input/input6 generic-usb 0003:0A81:0205.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.1/input/input7 generic-usb 0003:0A81:0205.0002: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input1 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 28 for MSI/MSI-X [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D fbcon: inteldrmfb (fb0) is primary device [drm] TMDS-15: set mode 1680x1050 25 [drm] LVDS-8: set mode 1440x900 26 Console: switching to colour frame buffer device 180x56 fb0: inteldrmfb frame buffer device registered panic notifier acpi device:03: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input8 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 dracut: Starting plymouth daemon dracut: rd_NO_MDIMSM: no MD RAID for imsm/isw raids pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:00:03.2: setting latency timer to 64 pata_acpi 0000:00:03.2: PCI INT C disabled device-mapper: multipath: version 1.1.0 loaded psmouse serio2: ID: 10 00 64 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9 dracut: Scanning devices sda2 sdb6 for LVM volume groups dracut: Reading all physical volumes. This may take a while... dracut: Found volume group "VolGroup" using metadata type lvm2 dracut: Found volume group "vg_rickfc12" using metadata type lvm2 dracut: 2 logical volume(s) in volume group "VolGroup" now active dracut: 2 logical volume(s) in volume group "vg_rickfc12" now active EXT4-fs (dm-2): barriers enabled kjournald2 starting: pid 423, dev dm-2:8, commit interval 5 seconds EXT4-fs (dm-2): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (dm-2): mounted filesystem with ordered data mode dracut: Mounted root filesystem /dev/mapper/vg_rickfc12-lv_root dracut: Loading SELinux policy type=1404 audit(1267175573.060:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 152815 rules. SELinux: 8192 avtab hash slots, 152815 rules. SELinux: 8 users, 11 roles, 3052 types, 147 bools, 1 sens, 1024 cats SELinux: 75 classes, 152815 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-2, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1267175573.204:3): policy loaded auid=4294967295 ses=4294967295 dracut: Switching root udev: starting version 145 type=1400 audit(1267175574.095:4): avc: denied { mmap_zero } for pid=518 comm="vbetool" scontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tcontext=system_u:system_r:vbetool_t:s0-s0:c0.c1023 tclass=memprotect cfg80211: Calling CRDA to update world regulatory domain iTCO_vendor_support: vendor-support=0 i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) ACPI: WMI: Mapper loaded Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 e1000e: Copyright (c) 1999-2008 Intel Corporation. e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 29 for MSI/MSI-X thinkpad_acpi: ThinkPad ACPI Extras v0.23 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 6HET21WW (1.06 ), EC 6HHT13WW-1.01 thinkpad_acpi: Lenovo ThinkPad T400s, model 2815A21 thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby Registered led device: tpacpi::thinkvantage thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. input: ThinkPad Extra Buttons as /devices/virtual/input/input10 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:24:7e:6e:18:f5 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480d) input: Integrated Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input11 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) phy0: Selected rate control algorithm 'iwl-agn-rs' HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 HDA Intel 0000:00:1b.0: setting latency timer to 64 cfg80211: Calling CRDA for country: US cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) EXT4-fs (dm-2): internal journal on dm-2:8 EXT4-fs (sda1): barriers enabled kjournald2 starting: pid 924, dev sda1:8, commit interval 5 seconds EXT4-fs (sda1): internal journal on sda1:8 EXT4-fs (sda1): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda1): mounted filesystem with ordered data mode SELinux: initialized (dev sda1, type ext4), uses xattr Adding 5160952k swap on /dev/mapper/vg_rickfc12-lv_swap. Priority:-1 extents:1 across:5160952k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07 platform microcode: firmware: requesting intel-ucode/06-17-0a microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07 platform microcode: firmware: requesting intel-ucode/06-17-0a Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team e1000e 0000:00:19.0: irq 29 for MSI/MSI-X Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered e1000e 0000:00:19.0: irq 29 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready [drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own [drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own [drm] TMDS-15: set mode 1680x1050 2e e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 eth0: no IPv6 routers present [drm] LVDS-8: set mode 31 [drm] TMDS-15: set mode 33 fuse init (API version 7.12) SELinux: initialized (dev fuse, type fuse), uses genfs_contexts usb 1-5: USB disconnect, address 3 usb 1-5.6: USB disconnect, address 5 e1000e: eth0 NIC Link is Down CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 (__cpu_power = 2048) CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 (__cpu_power = 2048) thinkpad_acpi: EC reports that Thermal Table has changed thinkpad_acpi: unhandled HKEY event 0x4011 thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net usb 1-5: new high speed USB device using ehci_hcd and address 6 usb 1-5: New USB device found, idVendor=17ef, idProduct=100a usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 6 ports detected [drm] TMDS-15: set mode 2a usb 1-5.6: new low speed USB device using ehci_hcd and address 7 thinkpad_acpi: EC reports that Thermal Table has changed usb 1-5.6: New USB device found, idVendor=0a81, idProduct=0205 usb 1-5.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-5.6: Product: PS2 to USB Converter usb 1-5.6: Manufacturer: CHESEN usb 1-5.6: configuration #1 chosen from 1 choice input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.0/input/input12 generic-usb 0003:0A81:0205.0003: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.1/input/input13 generic-usb 0003:0A81:0205.0004: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input1 thinkpad_acpi: unhandled HKEY event 0x4010 thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 [drm] TMDS-15: set mode 34 usb 1-5: USB disconnect, address 6 usb 1-5.6: USB disconnect, address 7 e1000e: eth0 NIC Link is Down thinkpad_acpi: EC reports that Thermal Table has changed thinkpad_acpi: unhandled HKEY event 0x4011 thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 (__cpu_power = 2048) CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 (__cpu_power = 2048) [drm] LVDS-8: set mode 1b usb 1-5: new high speed USB device using ehci_hcd and address 8 usb 1-5: New USB device found, idVendor=17ef, idProduct=100a usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 6 ports detected [drm] TMDS-15: set mode c usb 1-5.6: new low speed USB device using ehci_hcd and address 9 thinkpad_acpi: EC reports that Thermal Table has changed usb 1-5.6: New USB device found, idVendor=0a81, idProduct=0205 usb 1-5.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-5.6: Product: PS2 to USB Converter usb 1-5.6: Manufacturer: CHESEN usb 1-5.6: configuration #1 chosen from 1 choice input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.0/input/input14 generic-usb 0003:0A81:0205.0005: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.1/input/input15 generic-usb 0003:0A81:0205.0006: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input1 thinkpad_acpi: unhandled HKEY event 0x4010 thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [drm] LVDS-8: set mode 3a [drm] TMDS-15: set mode 3d [drm] LVDS-8: set mode 3c [drm] TMDS-15: set mode 3e [drm] LVDS-8: set mode 40 [drm] TMDS-15: set mode 42 usb 1-5: USB disconnect, address 8 usb 1-5.6: USB disconnect, address 9 e1000e: eth0 NIC Link is Down CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 (__cpu_power = 2048) CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 (__cpu_power = 2048) thinkpad_acpi: EC reports that Thermal Table has changed thinkpad_acpi: unhandled HKEY event 0x4011 thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net usb 1-5: new high speed USB device using ehci_hcd and address 10 usb 1-5: New USB device found, idVendor=17ef, idProduct=100a usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 6 ports detected [drm:drm_crtc_helper_set_config] *ERROR* failed to set mode on crtc f6ccd000 thinkpad_acpi: EC reports that Thermal Table has changed usb 1-5.6: new low speed USB device using ehci_hcd and address 11 thinkpad_acpi: unhandled HKEY event 0x4010 thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net usb 1-5.6: New USB device found, idVendor=0a81, idProduct=0205 usb 1-5.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-5.6: Product: PS2 to USB Converter usb 1-5.6: Manufacturer: CHESEN usb 1-5.6: configuration #1 chosen from 1 choice input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.0/input/input16 generic-usb 0003:0A81:0205.0007: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.1/input/input17 generic-usb 0003:0A81:0205.0008: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX usb 1-5: USB disconnect, address 10 usb 1-5.6: USB disconnect, address 11 e1000e: eth0 NIC Link is Down thinkpad_acpi: EC reports that Thermal Table has changed thinkpad_acpi: unhandled HKEY event 0x4011 thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 domain 1: span 0-1 level CPU groups: 0-1 (__cpu_power = 2048) CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 domain 1: span 0-1 level CPU groups: 0-1 (__cpu_power = 2048) usb 1-5: new high speed USB device using ehci_hcd and address 12 usb 1-5: New USB device found, idVendor=17ef, idProduct=100a usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-5: configuration #1 chosen from 1 choice hub 1-5:1.0: USB hub found hub 1-5:1.0: 6 ports detected [drm] TMDS-15: set mode 1c thinkpad_acpi: EC reports that Thermal Table has changed usb 1-5.6: new low speed USB device using ehci_hcd and address 13 thinkpad_acpi: unhandled HKEY event 0x4010 thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net usb 1-5.6: New USB device found, idVendor=0a81, idProduct=0205 usb 1-5.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-5.6: Product: PS2 to USB Converter usb 1-5.6: Manufacturer: CHESEN usb 1-5.6: configuration #1 chosen from 1 choice input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.0/input/input18 generic-usb 0003:0A81:0205.0009: input,hidraw0: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input0 input: CHESEN PS2 to USB Converter as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.6/1-5.6:1.1/input/input19 generic-usb 0003:0A81:0205.000A: input,hidraw1: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1a.7-5.6/input1 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX