#!/usr/bin/perl
#
# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
# Yokogawa Electric Corporation.
# All rights reserved.
# 
# Redistribution and use of this software in source and binary
# forms, with or without modification, are permitted provided that
# the following conditions and disclaimer are agreed and accepted
# by the user:
# 
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with
#    the distribution.
# 
# 3. Neither the names of the copyrighters, the name of the project
#    which is related to this software (hereinafter referred to as
#    "project") nor the names of the contributors may be used to
#    endorse or promote products derived from this software without
#    specific prior written permission.
# 
# 4. No merchantable use may be permitted without prior written
#    notification to the copyrighters.
# 
# 5. The copyrighters, the project and the contributors may prohibit
#    the use of this software at any time.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHTERS, THE PROJECT AND
# CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING
# BUT NOT LIMITED THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE, ARE DISCLAIMED.  IN NO EVENT SHALL THE
# COPYRIGHTERS, THE PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# $Id: IKEv2-EN-R-1-1-8-2-A.seq,v 1.5 2008/11/28 10:16:22 doo Exp $
#
################################################################



BEGIN
{
	push(@INC, '..');
}

END { }



use IKEv2;
use strict;



my $remote	= 'common_remote_index';
my $ike_sa_init_req_param	= undef;
my $ike_sa_init_resp_param	= undef;
my $ike_auth_req_param	= undef;
my $ike_auth_resp_param	= undef;
my $create_child_sa_req_param	= undef;
my $create_child_sa_resp_param	= undef;

my $session	= undef;
my $material	= undef;
my $child_sa_material_1 = undef;
my $str	= undef;
my $ret = undef;

my @local_create_child_sa_req = undef;
my @local_create_child_sa_resp = undef;


#------------------------------#
# register IKEv2.pm            #
#------------------------------#
kLogHTML('<FONT COLOR="#FF0000" SIZE="+1"><U><B>TEST SETUP</B></U></FONT>');



unless(IKEv2initialize('EN', 'EN')) {
	IKEv2exitFatal('<FONT COLOR="#ff0000">IKEv2 module initializing failure</FONT>');
}



#------------------------------#
# configure TN                 #
#------------------------------#
unless(IKEv2setupTN()) {
	IKEv2exitFatal('<FONT COLOR="#ff0000">TN setup failure</FONT>');
}



#------------------------------#
# configure NUT                #
#------------------------------#
unless(IKEv2setupNUT()) {
	IKEv2exitFatal('<FONT COLOR="#ff0000">NUT setup failure</FONT>');
}



#------------------------------#
# prepare session handler      #
#------------------------------#
kLogHTML('<FONT COLOR="#FF0000" SIZE="+1"><U><B>TEST PROCEDURE</B></U></FONT>');



$session = IKEv2create_session($remote);
unless(defined($session)) {
	IKEv2exitFatal('<FONT COLOR="#ff0000">IKEv2 session creation failure</FONT>');
}



#--------------------------------------#
# send IKE_SA_INIT request to NUT      #
#--------------------------------------#
$str  = '<PRE>';
$str .= "    (R)             (I)\n";
$str .= "    NUT             TN1\n";
$str .= "     |               |\n";
$str .= "     |<--------------| IKE_SA_INIT request (HDR, SAi1, KEi, Ni)\n";
$str .= "     |               |\n";
$str .= "     V               V";
$str .= '</PRE>';

kLogHTML($str);



$ike_sa_init_req_param = devel_IKEv2send_IKE_SA_INIT_request($session, $remote);
unless(defined($ike_sa_init_req_param)) {
	kLogHTML(kDump_Common_Error());
	IKEv2exitFatal('<FONT COLOR="#ff0000">Can\'t send IKE_SA_INIT request.</FONT>');
}



#--------------------------------------#
# receive IKE_SA_INIT response by NUT  #
#--------------------------------------#
$str  = '<PRE>';
$str .= "    (R)             (I)\n";
$str .= "    NUT             TN1\n";
$str .= "     |               |\n";
$str .= "     |-------------->| IKE_SA_INIT response (HDR, SAr1, KEr, Nr)\n";
$str .= "     |               |\n";
$str .= "     V               V";
$str .= '</PRE>';

kLogHTML($str);



$ike_sa_init_resp_param = devel_IKEv2receive_IKE_SA_INIT_response($session,
							$remote,
							$ike_sa_init_req_param);
unless(defined($ike_sa_init_resp_param)) {
	kLogHTML(kDump_Common_Error());
	kLogHTML('<FONT COLOR="#ff0000">Can\'t observe IKE_SA_INIT response.</FONT>');
	IKEv2exitFail();
}



#--------------------------------------#
# generate keying material             #
#--------------------------------------#
$material = devel_IKEv2gen_keymat(1, $ike_sa_init_req_param, $ike_sa_init_resp_param);
unless(defined($material)) {
	kLogHTML(kDump_Common_Error());
	IKEv2exitFatal('<FONT COLOR="#ff0000">Can\'t generate keying material.</FONT>');
}



#--------------------------------------#
# send IKE_AUTH request to NUT         #
#--------------------------------------#
$str  = '<PRE>';
$str .= "    (R)             (I)\n";
$str .= "    NUT             TN1\n";
$str .= "     |               |\n";
$str .= "     |<--------------| IKE_AUTH request (HDR, SK {IDi, AUTH, N(USE_TRANSPORT_MODE), SAi2, TSi, TSr})\n";
$str .= "     |               |\n";
$str .= "     V               V";
$str .= '</PRE>';

kLogHTML($str);



$ike_auth_req_param = devel_IKEv2send_IKE_AUTH_request($session, $remote, $ike_sa_init_req_param, $ike_sa_init_resp_param, $material);
unless(defined($ike_auth_req_param)) {
	kLogHTML(kDump_Common_Error());
	IKEv2exitFatal('<FONT COLOR="#ff0000">Can\'t send IKE_AUTH request.</FONT>');
}



#--------------------------------------#
# receive IKE_AUTH response by NUT     #
#--------------------------------------#
$str  = '<PRE>';
$str .= "    (R)             (I)\n";
$str .= "    NUT             TN1\n";
$str .= "     |               |\n";
$str .= "     |-------------->| IKE_AUTH response (HDR, SK {IDr, AUTH, N(USE_TRANSPORT_MODE), SAr2, TSi, TSr)\n";
$str .= "     |               |\n";
$str .= "     V               V";
$str .= '</PRE>';

kLogHTML($str);



$ike_auth_resp_param = devel_IKEv2receive_IKE_AUTH_response($session,
							$remote,
							$ike_sa_init_req_param,
							$ike_sa_init_resp_param,
							$ike_auth_req_param,
							$material);
unless(defined($ike_auth_resp_param)) {
	kLogHTML(kDump_Common_Error());
	kLogHTML('<FONT COLOR="#ff0000">Can\'t observe IKE_AUTH response.</FONT>');
	IKEv2exitFail();
}



#--------------------------------------#
# generate keying material (CHILD_SA)  #
#--------------------------------------#
$child_sa_material_1 = devel_IKEv2gen_child_sa_keymat(1,
                                                      $material,
                                                      $ike_sa_init_req_param,
                                                      $ike_sa_init_resp_param,
                                                      $ike_auth_req_param,
                                                      $ike_auth_resp_param,
                                                      undef,
                                                      undef);



#--------------------------------------#
# set keying material                  #
#--------------------------------------#
$ret = IKEv2set_child_sa_keymat(1, $child_sa_material_1, $ike_auth_req_param, $ike_auth_resp_param);
unless($ret) {
	kLogHTML(kDump_Common_Error());
	IKEv2exitFatal('<FONT COLOR="#ff0000">Can\'t set keying material.</FONT>');
}



#----------------------------------#
# prepare CREATE_CHILD_SA Request  #
#----------------------------------#
my $common_create_child_sa_req = $gen_create_child_sa_req->{'common_remote_index'};
@local_create_child_sa_req = @{$common_create_child_sa_req};
# set invalid nonce payload length
for (my $i = 0; $i < scalar(@local_create_child_sa_req); $i++) {
	my $payload = $local_create_child_sa_req[$i];

	if ( ($payload->{'self'} eq 'Ni, Nr')) {
		$payload->{'nonce'} = '';
		last;
	}
}
$gen_create_child_sa_req->{'EN-R-1-1-9-3.1'} = \@local_create_child_sa_req;



#---------------------------------------------#
# send CREATE_CHILD_SA request to NUT         #
#---------------------------------------------#
$str  = '<PRE>';
$str .= "    (R)             (I)\n";
$str .= "    NUT             TN1\n";
$str .= "     |               |\n";
$str .= "     |<--------------| CREATE_CHILD_SA request (HDR, SK {IDi, AUTH, N(USE_TRANSPORT_MODE), SAi2, TSi, TSr})\n";
$str .= "     |               |\n";
$str .= "     V               V";
$str .= '</PRE>';

kLogHTML($str);

$create_child_sa_req_param = devel_IKEv2send_CREATE_CHILD_SA_request($session,
                                                       'EN-R-1-1-9-3.1',
                                                       $ike_sa_init_req_param,
                                                       $ike_sa_init_resp_param,
						       $ike_auth_req_param,
                                                       $material);
unless(defined($create_child_sa_req_param)) {
	kLogHTML(kDump_Common_Error());
	IKEv2exitFatal('<FONT COLOR="#ff0000">Can\'t send CREATE_CHILD_SA request.</FONT>');
}



#-------------------------------------------------------#
# prepare CREATE_CHILD_SA response (w/ INVALID_IKE_SPI) #
#-------------------------------------------------------#
my $notify_invalid_syntax =
{       # Notify Payload
        'self'          => 'N',             # *** MUST BE HERE ***
        'nexttype'      => '0',             # Next Payload
        'critical'      => '0',             # Critical
        'reserved'      => '0',             # RESERVED
        'length'        => '8',             # Payload Length
        'id'            => '0',             # Protocol ID
        'spiSize'       => '0',             # SPI Size
        'type'          => 'INVALID_SYNTAX',        # Notify Type
};
my $common_create_child_sa_resp = $exp_create_child_sa_resp->{'common_remote_index'};
@local_create_child_sa_resp = @{$common_create_child_sa_resp};
# remove payload into E & add Notify payload
foreach my $payload (@local_create_child_sa_resp) {
	if ($payload->{'self'} eq 'E') {
		splice(@{$payload->{'innerPayloads'}}, 0);
		push(@{$payload->{'innerPayloads'}}, $notify_invalid_syntax);
		$payload->{'innerType'} = $notify_invalid_syntax->{'self'};
	}
}
$exp_create_child_sa_resp->{'EN-R-1-1-9-3.2'} = \@local_create_child_sa_resp;



#---------------------------------------------#
# receive CREATE_CHILD_SA response by NUT     #
#---------------------------------------------#
$str  = '<PRE>';
$str .= "    (R)             (I)\n";
$str .= "    NUT             TN1\n";
$str .= "     |               |\n";
$str .= "     |-------------->| CREATE_CHILD_SA response (HDR, SK {N(INVALID_ISYNTAX)))\n";
$str .= "     |               |\n";
$str .= "     V               V";
$str .= '</PRE>';

kLogHTML($str);


$create_child_sa_resp_param = devel_IKEv2receive_CREATE_CHILD_SA_response($session,
                                                            'EN-R-1-1-9-3.2',
                                                            $ike_sa_init_req_param,
                                                            $ike_sa_init_resp_param,
                                                            $create_child_sa_req_param,
                                                            $material);
unless(defined($create_child_sa_resp_param)) {
	kLogHTML(kDump_Common_Error());
	kLogHTML('<FONT COLOR="#ff0000">Can\'t observe CREATE_CHILD_SA response.</FONT>');
	IKEv2exitFail();
}



#--------------------------------------#
# exit with cleanup                    #
#--------------------------------------#
IKEv2exitPass();
# NOTREACHED



#
# perldoc
#
########################################################################
__END__

=head1 Title

  Test IKEv2.EN.R.1.1.8.2: INVALID_SYNTAX
  Part A: (BASIC)

=head1 Purpose

  To verify an IKEv2 device properly handles IKE message with an invalid syntax.

=head1 References

  * [RFC 4306] - Sections 3.10.1

=head1 Test Setup

  * Network Topology
      Connect the devices according to the Common Topology.
  * Configuration
      In each part, configure the devices according to the Common Configuration.
  * Pre-Sequence and Cleanup Sequence
      IKEv2 on the NUT is disabled after each part.

=head1 Procedure

=begin html

<BLOCKQUOTE>
<PRE>

   NUT                  TN1
(End-Node)           (End-Node)
    |                    |
    |<-------------------| IKE_SA_INIT request (HDR, SAi1, KEi, Ni)
    |                    | (Packet #1)
    |------------------->| IKE_SA_INIT Response (HDR, SAr2, KEr, Nr)
    |                    | (Judgement #1)
    |                    |
    |<-------------------| IKE_AUTH request (HDR, SK {IDi, AUTH, N+, SAi2, TSi, TSr})
    |                    | (Packet #2)
    |------------------->| IKE_AUTH REsponse (HDR, SK {IDr, AUTH, N+, SAr2, TSi, TSr})
    |                    | (Judgement #2)
    |                    |
    |<-------------------| CREATE_CHILD_SA request (HDR, SK {N, N+, SA, Ni, KEi, TSi, TSr})
    |                    | (Packet #3)
    |---------X          | CREATE_CHILD_SA response (HDR, SK {N+, SA, Nr, KEr, TSi, TSr})
    |                    |   or
    |------------------->| CREATE_CHILD_SA response (HDR, SK { N(INVALID_SYNTAX) })
    |                    | (Judgement #3)
    |                    |
    V                    V
<br>
 N: REKEY_SA
 N+: USE_TRANSPORT_MODE

</BLOCKQUOTE>

<BLOCKQUOTE>
<TABLE BORDER>
<TR>
<TD><TT>Packet #1</TT></TD>
<TD><TT>See Common Packet #1</TT></TD>
</TR>
<TR>
<TD><TT>Packet #2</TT></TD>
<TD><TT>See Common Packet #3</TT></TD>
</TR>
<TR>
<TD><TT>Packet #3</TT></TD>
<TD><TT>See below</TT></TD>
</TR>
</TABLE>
</BLOCKQUOTE>
<br>

<BLOCKQUOTE>
  * Packet #3: CREATE_CHILD_SA request (Part A)
<TABLE BORDER>
<TR>
<TD>IPv6 Header</TD>
<TD colspan="2">Same as the Common Packet #13</TD>
</TR>
<TR>
<TD>UDP Header</TD>
<TD colspan="2">Same as the Common Packet #13</TD>
</TR>
<TR>
<TD>IKEv2 Header</TD>
<TD colspan="2">Same as the Common Packet #13</TD>
</TR>
<TR>
<TD>E Payloa</TD>
<TD colspan="2">Same as the Common Packet #13</TD>
</TR>
<TR>
<TD>N Payload</TD>
<TD colspan="2">Same as the Common Packet #13</TD>
</TR>
<TR>
<TD>N Payload</TD>
<TD colspan="2">Same as the Common Packet #13</TD>
</TR>
<TR>
<TD>SA Payload</TD>
<TD colspan="2">Same as the Common Packet #13</TD>
</TR>
<TR>
<TD rowspan="3">Ni, Nr Payload</TD>
<TD colspan="2">Other fields are same as the common packet #13</TD>
</TR>
<TR>
<TD>Payload Length</TD>
<TD>4</TD>
</TR>
<TR>
<TD>Nonce Data</TD>
<TD>empty</TD>
</TR>
<TR>
<TD>TSi Payload</TD>
<TD colspan="2">Same as the Common Packet #13</TD>
</TR>
<TR>
<TD>TSr Payload</TD>
<TD colspan="2">Same as the Common Packet #13</TD>
</TR>
</TABLE>
</BLOCKQUOTE>
<br>

=end html

  Part A: (BASIC)
       1. TN1 starts to negotiate with NUT by sending IKE_SA_INIT request.
       2. Observe the messages transmitted on Link A.
       3. After a reception of IKE_SA_INIT response from the NUT, TN1 transmits IKE_AUTH
          request to the NUT.
       4. Observe the messages transmitted on Link A.
       5. After reception of IKE_AUTH response from the NUT, TN1 transmits
          CREATE_CHILD_SA request which has no data as Nonce Data as Ni payload.
       6. Observe the messages transmitted on Link A.

=head1 Observable Result

  Part A
    Step 2: Judgment #1
      The NUT transmits an IKE_SA_INIT response including "ENCR_3DES",
      "PRF_HMAC_SHA1", "AUTH_HMAC_SHA1_96" and "D-H group 2" as accepted
      algorithms.
  
    Step 4: Judgment #2
      The NUT transmits an IKE_AUTH response including "ENCR_3DES",
      "AUTH_HMAC_SHA1_96" and "No Extended Sequence Numbers" as accepted algorithms.
  
    Step 6: Judgment #3
      The NUT does not transmits a CREATE_CHILD_SA response or transmits a
      CREATE_CHILD_SA response including a Notify payload of type INVALID_SYNTAX.

=head1 Possible Problems

  * None.

=cut


