Test IKEv2.EN.R.1.1.2.2: Receipt of retransmitted IKE_AUTH request Part A: (BASIC)
To verify an IKEv2 device transmits an IKE_AUTH response when the device received a retransmitted IKE_AUTH request.
* [RFC 4306] - Sections 2.1, 2.2 and 2.4
* Network Topology Connect the devices according to the Common Topology. * Configuration In each part, configure the devices according to the Common Configuration. * Pre-Sequence and Cleanup Sequence IKEv2 on the NUT is disabled after each part.
NUT TN1 (End-Node) (End-Node) | | |<-------------------| IKE_SA_INIT request (HDR, SAi1, KEi, Ni) | | (Packet #1) |------------------->| IKE_SA_INIT response (HDR, SAr1, KEr, Nr) | | (Judgement #1) | | |<-------------------| IKE_AUTH request (HDR, SK {IDi, AUTH, N, SAi2, TSi, TSr}) | | (Packet #2) |------------------->| IKE_AUTH response (HDR, SK {IDr, AUTH, N, SAr2, TSi, TSr}) | | (Judgement #2) | | | * wait until retrans timer expires |---------X | IKE_AUTH response (HDR, SK {IDr, AUTH, N, SAr2, TSi, TSr}) | | (Judgement #3) | | |<-------------------| IKE_AUTH request (HDR, SK {IDi, AUTH, N, SAi2, TSi, TSr}) | | (Packet #3) |------------------->| IKE_AUTH response (HDR, SK {IDr, AUTH, N, SAr2, TSi, TSr}) | | (Judgement #4) | | V V
N: USE_TRANSPORT_MODE
Packet #1 See Common Packet #1 Packet #2 See Common Packet #3 Packet #3 See Common Packet #3
(The Message ID is the same as Packet #1)
Part A: (BASIC) 1. TN starts to negotiate with NUT by sending IKE_SA_INIT request. 2. Observe the messages transmitted on Link A. 3. After reception of an IKE_SA_INIT response from the NUT, TN1 transmits an IKE_AUTH request to the NUT. 4. Observe the messages transmitted on Link A. 5. Observe the messages transmitted on Link A. 6. TN1 retransmits the same IKE_AUTH request as the request transmitted in Step 3 to the NUT. 7. Observe the messages transmitted on Link A.
Part A Step 2: Judgment #1 The NUT transmits an IKE_SA_INIT response including "ENCR_3DES", "PRF_HMAC_SHA1", "AUTH_HMAC_SHA1_96" and "D-H group 2" as accepted algorithms.
Step 4: Judgment #2 The NUT transmits an IKE_AUTH response including "ENCR_3DES", "AUTH_HMAC_SHA1_96" and "No Extended Sequence Numbers" as accepted algorithms.
Step 5: Judgment #3 The NUT never retransmits the same IKE_AUTH response as the response transmitted at Step 4.
Step 7: Judgment #4 The NUT transmits the same IKE_AUTH response as the response transmitted at Step 4.
* None.