Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.29.1-54.fc11.x86_64 (mockbuild@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.4.0 20090330 (Red Hat 4.4.0-0.31) (GCC) ) #1 SMP Tue Apr 7 05:26:42 EDT 2009 Command line: ro root=/dev/mapper/VolGroup00-root rhgb quiet fastboot nomodeset 3 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d400 (usable) BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf8a1000 (usable) BIOS-e820: 00000000bf8a1000 - 00000000bf8a7000 (reserved) BIOS-e820: 00000000bf8a7000 - 00000000bf9bb000 (usable) BIOS-e820: 00000000bf9bb000 - 00000000bfa0f000 (reserved) BIOS-e820: 00000000bfa0f000 - 00000000bfb08000 (usable) BIOS-e820: 00000000bfb08000 - 00000000bfd0f000 (reserved) BIOS-e820: 00000000bfd0f000 - 00000000bfd18000 (usable) BIOS-e820: 00000000bfd18000 - 00000000bfd1f000 (reserved) BIOS-e820: 00000000bfd1f000 - 00000000bfd67000 (usable) BIOS-e820: 00000000bfd67000 - 00000000bfd9f000 (ACPI NVS) BIOS-e820: 00000000bfd9f000 - 00000000bfde3000 (usable) BIOS-e820: 00000000bfde3000 - 00000000bfdff000 (ACPI data) BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) DMI present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. last_pfn = 0x140000 max_arch_pfn = 0x100000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 4GB, range: 1GB, type WB reg 3, base: 4094MB, range: 2MB, type WP total RAM coverred: 4096M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 64K num_reg: 3 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 4GB, range: 1GB, type WB x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xbfe00 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000bfe00000 0000000000 - 00bfe00000 page 2M kernel direct mapping tables up to bfe00000 @ 10000-14000 last_map_addr: bfe00000 end: bfe00000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ 12000-18000 last_map_addr: 140000000 end: 140000000 RAMDISK: 37bfb000 - 37fef1dd ACPI: RSDP 000F7540, 0024 (r2 PTLTD ) ACPI: XSDT BFDF74D1, 0064 (r1 PTLTD XSDT 6040000 LTP 0) ACPI: FACP BFDE7000, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT BFDE8000, 7837 (r2 Intel CANTIGA 6040000 INTL 20050624) ACPI: FACS BFD9EFC0, 0040 ACPI: HPET BFDFEEFC, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A) ACPI: MCFG BFDFEF34, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A) ACPI: APIC BFDFEF70, 0068 (r1 PTLTD APIC 6040000 LTP 0) ACPI: BOOT BFDFEFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1) ACPI: SSDT BFDE6000, 0655 (r1 PmRef CpuPm 3000 INTL 20050624) ACPI: SSDT BFDE5000, 0259 (r1 PmRef Cpu0Tst 3000 INTL 20050624) ACPI: SSDT BFDE4000, 020F (r1 PmRef ApTst 3000 INTL 20050624) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000140000000 Bootmem setup node 0 0000000000000000-0000000140000000 NODE_DATA [0000000000013000 - 0000000000027fff] bootmap [0000000000028000 - 000000000004ffff] pages 28 (7 early reservations) ==> bootmem [0000000000 - 0140000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000ac70c0] TEXT DATA BSS ==> [0000200000 - 0000ac70c0] #3 [0037bfb000 - 0037fef1dd] RAMDISK ==> [0037bfb000 - 0037fef1dd] #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #6 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000] found SMP MP-table at [ffff8800000f75d0] 000f75d0 [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node early_node_map[9] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x000bf8a1 0: 0x000bf8a7 -> 0x000bf9bb 0: 0x000bfa0f -> 0x000bfb08 0: 0x000bfd0f -> 0x000bfd18 0: 0x000bfd1f -> 0x000bfd67 0: 0x000bfd9f -> 0x000bfde3 0: 0x000bfdff -> 0x000bfe00 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1047249 DMA zone: 56 pages used for memmap DMA zone: 2353 pages reserved DMA zone: 1572 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 766844 pages, LIFO batch:31 Normal zone: 3584 pages used for memmap Normal zone: 258560 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 PM: Registered nosave memory: 00000000bf8a1000 - 00000000bf8a7000 PM: Registered nosave memory: 00000000bf9bb000 - 00000000bfa0f000 PM: Registered nosave memory: 00000000bfb08000 - 00000000bfd0f000 PM: Registered nosave memory: 00000000bfd18000 - 00000000bfd1f000 PM: Registered nosave memory: 00000000bfd67000 - 00000000bfd9f000 PM: Registered nosave memory: 00000000bfde3000 - 00000000bfdff000 PM: Registered nosave memory: 00000000bfe00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: bfe00000:40200000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Allocating 65536 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 1026976 Policy zone: Normal Kernel command line: ro root=/dev/mapper/VolGroup00-root rhgb quiet fastboot nomodeset 3 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2527.050 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 4011200k/5242880k available (3779k kernel code, 1053884k absent, 177796k reserved, 2287k data, 1312k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5054.10 BogoMIPS (lpj=2527050) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K [ds] using Core 2/Atom configuration CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20081204 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 18842 entries in 149 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 40126.38 BogoMIPS (lpj=20063192) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K [ds] using Core 2/Atom configuration CPU 1/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU1: Thermal monitoring handled by SMI x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (45180.48 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5920 bytes CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1904 bytes Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 18:02:46 Date: 04/09/09 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 ACPI: EC: GPE storm detected, transactions will use polling mode PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at e0000000 - efffffff ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in poll mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) DMAR: Forcing write-buffer flush capability pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.2: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf4604800-0xf4604bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xf4600000-0xf4603fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf4604c00-0xf4604fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x18f0-0x18f7] pci 0000:00:1f.2: reg 14 io port: [0x18e4-0x18e7] pci 0000:00:1f.2: reg 18 io port: [0x18e8-0x18ef] pci 0000:00:1f.2: reg 1c io port: [0x18e0-0x18e3] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf4604000-0xf46047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f] pci 0000:01:00.0: reg 10 32bit mmio: [0xf5000000-0xf5ffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf6000000-0xf7ffffff] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x07ffff] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff] pci 0000:00:01.0: bridge 32bit mmio: [0xf5000000-0xf7ffffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xf8000000-0xfbffffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff] pci 0000:06:00.0: reg 10 64bit mmio: [0xf4100000-0xf4101fff] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold pci 0000:06:00.0: PME# disabled pci 0000:00:1c.2: bridge 32bit mmio: [0xf4100000-0xf41fffff] pci 0000:07:00.0: reg 10 32bit mmio: [0xf4300800-0xf4300fff] pci 0000:07:00.0: reg 14 32bit mmio: [0xf4301000-0xf430107f] pci 0000:07:00.0: reg 20 32bit mmio: [0xf4300400-0xf430047f] pci 0000:07:00.0: reg 24 32bit mmio: [0xf4300000-0xf430007f] pci 0000:07:00.1: reg 10 32bit mmio: [0xf4301400-0xf43014ff] pci 0000:07:00.2: reg 10 32bit mmio: [0xf4301800-0xf43018ff] pci 0000:07:00.3: reg 10 32bit mmio: [0xf4301c00-0xf4301cff] pci 0000:00:1c.4: bridge 32bit mmio: [0xf4300000-0xf43fffff] pci 0000:08:00.0: reg 10 io port: [0x4000-0x40ff] pci 0000:08:00.0: reg 18 64bit mmio: [0xf4200000-0xf4200fff] pci 0000:08:00.0: reg 20 64bit mmio: [0xf4000000-0xf400ffff] pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] pci 0000:08:00.0: supports D1 D2 pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0x4000-0x4fff] pci 0000:00:1c.5: bridge 32bit mmio: [0xf4200000-0xf42fffff] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xf4000000-0xf40fffff] pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved system 00:05: ioport range 0x680-0x69f has been reserved system 00:05: ioport range 0x400-0x47f has been reserved system 00:05: ioport range 0x480-0x48f has been reserved system 00:05: ioport range 0x900-0x903 has been reserved system 00:05: ioport range 0xffff-0xffff has been reserved system 00:05: ioport range 0x1000-0x107f has been reserved system 00:05: ioport range 0x1180-0x11ff has been reserved system 00:05: ioport range 0x164e-0x164f has been reserved system 00:05: ioport range 0xfe00-0xfe00 has been reserved system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:09: iomem range 0xfed10000-0xfed13fff has been reserved system 00:09: iomem range 0xfed18000-0xfed18fff has been reserved system 00:09: iomem range 0xfed19000-0xfed19fff has been reserved system 00:09: iomem range 0xe0000000-0xefffffff has been reserved system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:09: iomem range 0xfed40000-0xfed44fff has been reserved system 00:09: iomem range 0xfed45000-0xfed8ffff has been reserved pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xf5000000-0xf7ffffff pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xf8000000-0xfbffffff pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f3ffffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: 0xf4100000-0xf41fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0xf4300000-0xf43fffff pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.5: IO window: 0x4000-0x4fff pci 0000:00:1c.5: MEM window: 0xf4200000-0xf42fffff pci 0000:00:1c.5: PREFETCH window: 0x000000f4000000-0x000000f40fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled alloc irq_desc for 16 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 17 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff] pci_bus 0000:01: resource 1 mem: [0xf5000000-0xf7ffffff] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff] pci_bus 0000:01: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 mem: [0x0-0x0] pci_bus 0000:02: resource 1 mem: [0x0-0x0] pci_bus 0000:02: resource 2 mem: [0x0-0x0] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xfbffffff] pci_bus 0000:04: resource 2 mem: [0xf0000000-0xf3ffffff] pci_bus 0000:04: resource 3 mem: [0x0-0x0] pci_bus 0000:06: resource 0 mem: [0x0-0x0] pci_bus 0000:06: resource 1 mem: [0xf4100000-0xf41fffff] pci_bus 0000:06: resource 2 mem: [0x0-0x0] pci_bus 0000:06: resource 3 mem: [0x0-0x0] pci_bus 0000:07: resource 0 mem: [0x0-0x0] pci_bus 0000:07: resource 1 mem: [0xf4300000-0xf43fffff] pci_bus 0000:07: resource 2 mem: [0x0-0x0] pci_bus 0000:07: resource 3 mem: [0x0-0x0] pci_bus 0000:08: resource 0 io: [0x4000-0x4fff] pci_bus 0000:08: resource 1 mem: [0xf4200000-0xf42fffff] pci_bus 0000:08: resource 2 mem: [0xf4000000-0xf40fffff] pci_bus 0000:08: resource 3 mem: [0x0-0x0] pci_bus 0000:09: resource 0 mem: [0x0-0x0] pci_bus 0000:09: resource 1 mem: [0x0-0x0] pci_bus 0000:09: resource 2 mem: [0x0-0x0] pci_bus 0000:09: resource 3 io: [0x00-0xffff] pci_bus 0000:09: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 4048k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1239300166.426:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7842 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 alloc irq_desc for 24 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 25 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 26 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 27 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.2: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 alloc irq_desc for 28 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.4: irq 28 for MSI/MSI-X pcieport-driver 0000:00:1c.5: setting latency timer to 64 alloc irq_desc for 29 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.5: irq 29 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 decode_hpp: Could not get hotplug parameters. Use defaults acpiphp: Slot [1] registered ACPI Error (psargs-0359): [\_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__.ADJP] (Node ffff88013fa50660), AE_NOT_FOUND ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff88013fa50620), AE_NOT_FOUND ACPI Exception (ac-0135): AE_NOT_FOUND, Error reading AC Adapter state [20081204] ACPI: Battery Slot [BAT0] (battery absent) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button (CM) [PWRB] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 ACPI: Lid Switch [LID0] ACPI: SSDT BFD1AC20, 0265 (r1 PmRef Cpu0Ist 3000 INTL 20050624) ACPI: SSDT BFD18620, 05C5 (r1 PmRef Cpu0Cst 3001 INTL 20050624) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT BFD19CA0, 01CF (r1 PmRef ApIst 3000 INTL 20050624) ACPI: SSDT BFD19F20, 008D (r1 PmRef ApCst 3000 INTL 20050624) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZ0] (58 C) Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 Non-volatile memory driver v1.3 Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded loop: module loaded Fixed MDIO Bus: probed input: Macintosh mouse button emulation as /devices/virtual/input/input4 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ahci 0000:00:1f.2: version 3.0 alloc irq_desc for 19 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 alloc irq_desc for 30 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ahci 0000:00:1f.2: irq 30 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x13 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pmp pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci scsi4 : ahci ata1: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604100 irq 30 ata2: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604180 irq 30 ata3: DUMMY ata4: DUMMY ata5: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604300 irq 30 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf4604800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29.1-54.fc11.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected alloc irq_desc for 23 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4604c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29.1-54.fc11.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29.1-54.fc11.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 21 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29.1-54.fc11.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.29.1-54.fc11.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.29.1-54.fc11.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.29.1-54.fc11.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.29.1-54.fc11.x86_64 uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu Marking TSC unstable due to TSC halts in idle usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 5:533:38 bdi 7:3: hash matches Initalizing network drop monitor service input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 usb 1-1: new high speed USB device using ehci_hcd and address 2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Clocksource tsc unstable (delta = -332728456 ns) ata1.00: ATA-8: WDC WD1600BEVS-26VAT0, 11.01A11, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 11.0 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk usb 1-1: New USB device found, idVendor=5986, idProduct=0300 usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 usb 1-1: Product: BisonCam, NB Pro usb 1-1: configuration #1 chosen from 1 choice Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04711/0x202000 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: Optiarc DVD RW AD-7590S, 1.01, max UDMA/100 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7590S 1.01 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 usb 3-2: new low speed USB device using uhci_hcd and address 2 ata5: SATA link down (SStatus 0 SControl 300) Freeing unused kernel memory: 1312k freed Write protecting the kernel read-only data: 1836k usb 3-2: New USB device found, idVendor=046d, idProduct=c001 usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-2: Product: USB Mouse usb 3-2: Manufacturer: Logitech usb 3-2: configuration #1 chosen from 1 choice input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input7 generic-usb 0003:046D:C001.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1a.0-2/input0 [drm] Initialized drm 1.1.0 20060810 pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:01:00.0: setting latency timer to 64 nouveau 0000:01:00.0: Detected an NV50 generation card (0x094600a1) [drm] Initialized nouveau 0.0.12 20060213 for 0000:01:00.0 on minor 0 usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: New USB device found, idVendor=147e, idProduct=2016 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: Fingerprint Sensor usb 4-1: Manufacturer: TouchStrip usb 4-1: configuration #1 chosen from 1 choice EXT4-fs: barriers enabled kjournald2 starting: pid 860, dev dm-2:8, commit interval 5 seconds EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-2 with ordered data mode type=1404 audit(1239300176.204:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux: 8192 avtab hash slots, 119534 rules. SELinux: 8192 avtab hash slots, 119534 rules. SELinux: 8 users, 13 roles, 2675 types, 123 bools, 1 sens, 1024 cats SELinux: 74 classes, 119534 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-2, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts type=1403 audit(1239300176.595:3): policy loaded auid=4294967295 ses=4294967295 udev: starting version 139 iTCO_vendor_support: vendor-support=0 ACPI: WMI: Mapper loaded cfg80211: Calling CRDA to update world regulatory domain r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:08:00.0: setting latency timer to 64 alloc irq_desc for 31 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 r8169 0000:08:00.0: irq 31 for MSI/MSI-X eth0: RTL8168c/8111c at 0xffffc20014f56000, 00:90:f5:82:cb:90, XID 3c4000c0 IRQ 31 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Linux video capture interface: v2.00 uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:0300) input: BisonCam, NB Pro as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/1-1:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' jmb38x_ms 0000:07:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 jmb38x_ms 0000:07:00.3: setting latency timer to 64 firewire_ohci 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 firewire_ohci 0000:07:00.0: setting latency timer to 64 firewire_ohci: Added fw-ohci device 0000:07:00.0, OHCI version 1.10 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:07:00.1: SDHCI controller found [197b:2382] (rev 0) sdhci-pci 0000:07:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:07:00.1: setting latency timer to 64 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:07:00.1] using DMA sdhci-pci 0000:07:00.2: SDHCI controller found [197b:2381] (rev 0) sdhci-pci 0000:07:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sdhci-pci 0000:07:00.2: Refusing to bind to secondary interface. sdhci-pci 0000:07:00.2: PCI INT A disabled iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds iwlagn: Copyright(c) 2003-2008 Intel Corporation iwlagn 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 iwlagn 0000:06:00.0: setting latency timer to 64 iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24 iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels alloc irq_desc for 32 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 iwlagn 0000:06:00.0: irq 32 for MSI/MSI-X wmaster0 (iwlagn): not using net_device_ops yet phy0: Selected rate control algorithm 'iwl-agn-rs' firewire_core: created device fw0: GUID 589947900090f514, S400 wlan0 (iwlagn): not using net_device_ops yet alloc irq_desc for 22 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 cfg80211: World regulatory domain updated: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) hda_codec: Unknown model for ALC662, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3503: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3507: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3511: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3512: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3520: inputs: mic=0x18, fmic=0x19, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/hda_generic.c:679: hda_generic: no proper input path found ALSA sound/pci/hda/hda_generic.c:427: hda_generic: no proper output path found ALSA sound/pci/hda/hda_generic.c:1026: hda_generic: no PCM found cfg80211: Calling CRDA for country: FI cfg80211: Regulatory domain changed to country: FI (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) EXT4 FS on dm-2, internal journal on dm-2:8 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr EXT4-fs: barriers enabled kjournald2 starting: pid 1962, dev dm-1:8, commit interval 5 seconds EXT4 FS on dm-1, internal journal on dm-1:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-1 with ordered data mode SELinux: initialized (dev dm-1, type ext4), uses xattr EXT4-fs: barriers enabled kjournald2 starting: pid 1963, dev dm-4:8, commit interval 5 seconds EXT4 FS on dm-4, internal journal on dm-4:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-4 with ordered data mode SELinux: initialized (dev dm-4, type ext4), uses xattr EXT4-fs: barriers enabled kjournald2 starting: pid 1964, dev dm-5:8, commit interval 5 seconds EXT4 FS on dm-5, internal journal on dm-5:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem dm-5 with ordered data mode SELinux: initialized (dev dm-5, type ext4), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs swap_cgroup: uses 32768 bytes of vmalloc for pointer array space and 16777216 bytes to hold mem_cgroup pointers on swap swap_cgroup can be disabled by noswapaccount boot option. Adding 8388600k swap on /dev/mapper/VolGroup00-swap. Priority:-1 extents:1 across:8388600k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts platform microcode: firmware: requesting intel-ucode/06-17-06 platform microcode: firmware: requesting intel-ucode/06-17-06 Microcode Update Driver: v2.00 , Peter Oruba Microcode Update Driver: v2.00 removed. JBD: barrier-based sync failed on dm-2:8 - disabling barriers Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized r8169: eth0: link up r8169: eth0: link up iwlagn 0000:06:00.0: firmware: requesting iwlwifi-5000-1.ucode iwlagn loaded firmware version 5.4.1.16 Registered led device: iwl-phy0:radio Registered led device: iwl-phy0:assoc Registered led device: iwl-phy0:RX Registered led device: iwl-phy0:TX audit(1239300204.231:19924): auid=4294967295 ses=4294967295 subj=system_u:system_r:initrc_t:s0 op=remove rule key=(null) list=2 res=1 audit(1239300204.231:19925): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 subj=system_u:system_r:initrc_t:s0 res=1 JBD: barrier-based sync failed on dm-1:8 - disabling barriers kmmio: spurious debug trap on CPU 1. kmmio: spurious debug trap on CPU 1. kmmio: spurious debug trap on CPU 1. kmmio: spurious debug trap on CPU 1. kmmio: spurious debug trap on CPU 1. kmmio: spurious debug trap on CPU 1. kmmio: spurious debug trap on CPU 1. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. mtrr: base(0xd0000000) is not aligned on a size(0x40000000) boundary nouveau 0000:01:00.0: Allocating FIFO number 1 nouveau 0000:01:00.0: nouveau_fifo_alloc: initialised FIFO 1 kmmio: spurious debug trap on CPU 0. kmmio: spurious debug trap on CPU 0. nouveau 0000:01:00.0: nouveau_fifo_free: freeing fifo 1 mtrr: no MTRR for d0000000,10000000 found