Linux version 2.6.18-92.el5.ivtestxen (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-41)) #1 SMP Mon May 19 12:06:02 EDT 2008 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000001d78e000 (usable) 0MB HIGHMEM available. 471MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 120718 DMA zone: 120718 pages, LIFO batch:31 found SMP MP-table at 000fe710 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000feb90 ACPI: RSDT (v001 DELL WS 450 0x00000006 ASL 0x00000061) @ 0x000fd4e2 ACPI: FADT (v001 DELL WS 450 0x00000006 ASL 0x00000061) @ 0x000fd51a ACPI: SSDT (v001 DELL st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffd1f11 ACPI: MADT (v001 DELL WS 450 0x00000006 ASL 0x00000061) @ 0x000fd58e ACPI: BOOT (v001 DELL WS 450 0x00000006 ASL 0x00000061) @ 0x000fd612 ACPI: ASF! (v016 DELL WS 450 0x00000006 ASL 0x00000061) @ 0x000fd63a ACPI: DSDT (v001 DELL dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: DELL Product ID: WS 450 APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. I/O APIC #3 Version 32 at 0xFEC80000. I/O APIC #4 Version 32 at 0xFEC80800. Enabling APIC mode: Flat. Using 3 I/O APICs Processors: 4 Built 1 zonelists. Total pages: 120718 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet acpi=noirq Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c073b000 soft=c071b000 PID hash table entries: 2048 (order: 11, 8192 bytes) Xen reported: 2657.862 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Software IO TLB enabled: Aperture: 2 megabytes Kernel range: 0x00000000c0165000 - 0x00000000c0365000 vmalloc area: de000000-f4ffe000, maxmem 2d7fe000 Memory: 455552k/482872k available (2098k kernel code, 18812k reserved, 867k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6648.15 BogoMIPS (lpj=13296310) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebd3f1 00000000 00000000 00000000 00000400 00000000 00000000 CPU: After vendor identify, caps: bfebd3f1 00000000 00000000 00000000 00000400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: After all inits, caps: bfebd3f1 00000000 00000000 00000080 00000400 00000000 00000000 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 13k freed ACPI: Core revision 20060707 ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs Brought up 1 CPUs sizeof(vma)=88 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=136 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=52 bytes sizeof(skbuff)=172 bytes checking if image is initramfs... it is Freeing initrd memory: 7058k freed Grant table initialized NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using configuration type 1 Setting up standard PCI resources Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0880-08bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Using IRQ router PIIX/ICH [8086/24c0] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 17 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:03:0c.0[A] -> IRQ 25 PCI->APIC IRQ transform: 0000:03:0c.1[B] -> IRQ 26 PCI->APIC IRQ transform: 0000:03:0e.0[A] -> IRQ 24 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:0b: ioport range 0x800-0x85f could not be reserved pnp: 00:0b: ioport range 0xc00-0xc7f has been reserved pnp: 00:0b: ioport range 0x860-0x8ff could not be reserved PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: ff800000-ff9fffff PREFETCH window: f0000000-f7ffffff PCI: Bridge: 0000:02:1d.0 IO window: d000-dfff MEM window: ff600000-ff7fffff PREFETCH window: 30000000-300fffff PCI: Bridge: 0000:02:1f.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: d000-dfff MEM window: ff400000-ff7fffff PREFETCH window: 30000000-300fffff PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x7a set to 0x80 audit: initializing netlink socket (disabled) audit(1217938516.012:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 48537C127307389C - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x2 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel E7505 Chipset. agpgart: AGP aperture is 32M @ 0xfa000000 RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide1... hdc: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide0... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 176k freed Write protecting the kernel read-only data: 379k input: AT Translated Set 2 keyboard as /class/input/input0 logips2pp: Detected unknown logitech mouse model 1 ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized Fusion MPT base driver 3.04.05 Copyright (c) 1999-2007 LSI Corporation Fusion MPT SPI Host driver 3.04.05 mptbase: ioc0: Initiating bringup input: PS/2 Logitech Mouse as /class/input/input1 ioc0: LSI53C1030 B2: Capabilities={Initiator} scsi0 : ioc0: LSI53C1030 B2, FwRev=01011800h, Ports=1, MaxQ=222, IRQ=25 mptbase: ioc1: Initiating bringup ioc1: LSI53C1030 B2: Capabilities={Initiator} scsi1 : ioc1: LSI53C1030 B2, FwRev=01011800h, Ports=1, MaxQ=222, IRQ=26 Vendor: SEAGATE Model: ST336732LW Rev: 2223 Type: Direct-Access ANSI SCSI revision: 03 target1:0:0: Beginning Domain Validation target1:0:0: Domain Validation skipping write tests target1:0:0: Ending Domain Validation target1:0:0: FAST-40 SCSI 40.0 MB/s ST (25 ns, offset 63) SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB) sda: Write Protect is off sda: Mode Sense: ab 00 10 08 SCSI device sda: drive cache: write back w/ FUA SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB) sda: Write Protect is off sda: Mode Sense: ab 00 10 08 SCSI device sda: drive cache: write back w/ FUA sda: sda1 sda2 sd 1:0:0:0: Attached scsi disk sda libata version 3.00 loaded. device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1217938532.489:2): selinux=0 auid=4294967295 ses=4294967295 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_register_port e1000: 0000:03:0e.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:08:74:4e:f8:51 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection intel_rng: FWH not detected hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_register_port EDAC MC: Ver: 2.0.1 May 19 2008 PCI: Setting latency timer of device 0000:00:1f.5 to 64 input: PC Speaker as /class/input/input2 sd 1:0:0:0: Attached scsi generic sg0 type 0 intel8x0_measure_ac97_clock: measured 59765 usecs intel8x0: clocking to 48000 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 lp: driver loaded but no devices found NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [VBTN] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:1048568k