fence_cisco_mds is an I/O Fencing agent which can be used with any Cisco MDS 9000 series with SNMP enabled device.
http://www.cisco.com
IP Address or Hostname
Login Name
Login password or passphrase
Physical plug number, name of virtual machine or UUID
Specifies SNMP version to use (1,2c,3)
Set the community string
TCP/UDP port to use for connection with device
Forces agent to use IPv4 addresses only
Forces agent to use IPv6 addresses only
Script to retrieve password
Set authentication protocol (MD5|SHA)
Set security level (noAuthNoPriv|authNoPriv|authPriv)
Set privacy protocol (DES|AES)
Set privacy protocol password
Script to run to retrieve privacy password
Fencing Action
Verbose mode
Write debug information to given file
Display version information and exit
Display help and exit
Separator for CSV created by operation list
Test X seconds for status change after ON/OFF
Wait X seconds for cmd prompt after issuing command
Wait X seconds for cmd prompt after login
Wait X seconds after issuing ON/OFF
Wait X seconds before fencing is started
Count of attempts to retry power on