diff --git a/toolkit/components/js-ctypes/src/libffi/LICENSE b/toolkit/components/js-ctypes/src/libffi/LICENSE new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/LICENSE @@ -0,0 +1,21 @@ +libffi - Copyright (c) 1996-2008 Red Hat, Inc and others. +See source files for details. + +Permission is hereby granted, free of charge, to any person obtaining +a copy of this software and associated documentation files (the +``Software''), to deal in the Software without restriction, including +without limitation the rights to use, copy, modify, merge, publish, +distribute, sublicense, and/or sell copies of the Software, and to +permit persons to whom the Software is furnished to do so, subject to +the following conditions: + +The above copyright notice and this permission notice shall be included +in all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, +EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF +MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. +IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY +CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, +TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE +SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. diff --git a/toolkit/components/js-ctypes/src/libffi/Makefile.in b/toolkit/components/js-ctypes/src/libffi/Makefile.in new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/Makefile.in @@ -0,0 +1,1648 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +target_triplet = @target@ +@MIPS_TRUE@am__append_1 = src/mips/ffi.c src/mips/o32.S src/mips/n32.S +@X86_TRUE@am__append_2 = src/x86/ffi.c src/x86/sysv.S +@X86_FREEBSD_TRUE@am__append_3 = src/x86/ffi.c src/x86/freebsd.S +@X86_WIN32_TRUE@am__append_4 = src/x86/ffi.c src/x86/win32.S +@X86_DARWIN_TRUE@am__append_5 = src/x86/ffi.c src/x86/darwin.S src/x86/ffi64.c src/x86/darwin64.S +@SPARC_TRUE@am__append_6 = src/sparc/ffi.c src/sparc/v8.S src/sparc/v9.S +@ALPHA_TRUE@am__append_7 = src/alpha/ffi.c src/alpha/osf.S +@IA64_TRUE@am__append_8 = src/ia64/ffi.c src/ia64/unix.S +@M32R_TRUE@am__append_9 = src/m32r/sysv.S src/m32r/ffi.c +@M68K_TRUE@am__append_10 = src/m68k/ffi.c src/m68k/sysv.S +@POWERPC_TRUE@am__append_11 = src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S src/powerpc/linux64.S src/powerpc/linux64_closure.S +@POWERPC_AIX_TRUE@am__append_12 = src/powerpc/ffi_darwin.c src/powerpc/aix.S src/powerpc/aix_closure.S +@POWERPC_DARWIN_TRUE@am__append_13 = src/powerpc/ffi_darwin.c src/powerpc/darwin.S src/powerpc/darwin_closure.S +@POWERPC_FREEBSD_TRUE@am__append_14 = src/powerpc/ffi.c src/powerpc/sysv.S src/powerpc/ppc_closure.S +@ARM_TRUE@am__append_15 = src/arm/sysv.S src/arm/ffi.c +@LIBFFI_CRIS_TRUE@am__append_16 = src/cris/sysv.S src/cris/ffi.c +@FRV_TRUE@am__append_17 = src/frv/eabi.S src/frv/ffi.c +@S390_TRUE@am__append_18 = src/s390/sysv.S src/s390/ffi.c +@X86_64_TRUE@am__append_19 = src/x86/ffi64.c src/x86/unix64.S src/x86/ffi.c src/x86/sysv.S +@SH_TRUE@am__append_20 = src/sh/sysv.S src/sh/ffi.c +@SH64_TRUE@am__append_21 = src/sh64/sysv.S src/sh64/ffi.c +@PA_LINUX_TRUE@am__append_22 = src/pa/linux.S src/pa/ffi.c +@PA_HPUX_TRUE@am__append_23 = src/pa/hpux32.S src/pa/ffi.c +subdir = . +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/doc/stamp-vti \ + $(srcdir)/doc/version.texi $(srcdir)/fficonfig.h.in \ + $(srcdir)/libffi.pc.in $(top_srcdir)/configure ChangeLog TODO \ + compile config.guess config.sub depcomp install-sh ltcf-c.sh \ + ltcf-cxx.sh ltcf-gcj.sh ltconfig ltmain.sh mdate-sh missing \ + mkinstalldirs texinfo.tex +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = fficonfig.h +CONFIG_CLEAN_FILES = libffi.pc +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(infodir)" \ + "$(DESTDIR)$(pkgconfigdir)" +libLTLIBRARIES_INSTALL = $(INSTALL) +LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES) +libffi_la_LIBADD = +am__dirstamp = $(am__leading_dot)dirstamp +am_libffi_la_OBJECTS = src/debug.lo src/prep_cif.lo src/types.lo \ + src/raw_api.lo src/java_raw_api.lo src/closures.lo +@MIPS_TRUE@am__objects_1 = src/mips/ffi.lo src/mips/o32.lo \ +@MIPS_TRUE@ src/mips/n32.lo +@X86_TRUE@am__objects_2 = src/x86/ffi.lo src/x86/sysv.lo +@X86_FREEBSD_TRUE@am__objects_3 = src/x86/ffi.lo src/x86/freebsd.lo +@X86_WIN32_TRUE@am__objects_4 = src/x86/ffi.lo src/x86/win32.lo +@X86_DARWIN_TRUE@am__objects_5 = src/x86/ffi.lo src/x86/darwin.lo \ +@X86_DARWIN_TRUE@ src/x86/ffi64.lo src/x86/darwin64.lo +@SPARC_TRUE@am__objects_6 = src/sparc/ffi.lo src/sparc/v8.lo \ +@SPARC_TRUE@ src/sparc/v9.lo +@ALPHA_TRUE@am__objects_7 = src/alpha/ffi.lo src/alpha/osf.lo +@IA64_TRUE@am__objects_8 = src/ia64/ffi.lo src/ia64/unix.lo +@M32R_TRUE@am__objects_9 = src/m32r/sysv.lo src/m32r/ffi.lo +@M68K_TRUE@am__objects_10 = src/m68k/ffi.lo src/m68k/sysv.lo +@POWERPC_TRUE@am__objects_11 = src/powerpc/ffi.lo src/powerpc/sysv.lo \ +@POWERPC_TRUE@ src/powerpc/ppc_closure.lo \ +@POWERPC_TRUE@ src/powerpc/linux64.lo \ +@POWERPC_TRUE@ src/powerpc/linux64_closure.lo +@POWERPC_AIX_TRUE@am__objects_12 = src/powerpc/ffi_darwin.lo \ +@POWERPC_AIX_TRUE@ src/powerpc/aix.lo \ +@POWERPC_AIX_TRUE@ src/powerpc/aix_closure.lo +@POWERPC_DARWIN_TRUE@am__objects_13 = src/powerpc/ffi_darwin.lo \ +@POWERPC_DARWIN_TRUE@ src/powerpc/darwin.lo \ +@POWERPC_DARWIN_TRUE@ src/powerpc/darwin_closure.lo +@POWERPC_FREEBSD_TRUE@am__objects_14 = src/powerpc/ffi.lo \ +@POWERPC_FREEBSD_TRUE@ src/powerpc/sysv.lo \ +@POWERPC_FREEBSD_TRUE@ src/powerpc/ppc_closure.lo +@ARM_TRUE@am__objects_15 = src/arm/sysv.lo src/arm/ffi.lo +@LIBFFI_CRIS_TRUE@am__objects_16 = src/cris/sysv.lo src/cris/ffi.lo +@FRV_TRUE@am__objects_17 = src/frv/eabi.lo src/frv/ffi.lo +@S390_TRUE@am__objects_18 = src/s390/sysv.lo src/s390/ffi.lo +@X86_64_TRUE@am__objects_19 = src/x86/ffi64.lo src/x86/unix64.lo \ +@X86_64_TRUE@ src/x86/ffi.lo src/x86/sysv.lo +@SH_TRUE@am__objects_20 = src/sh/sysv.lo src/sh/ffi.lo +@SH64_TRUE@am__objects_21 = src/sh64/sysv.lo src/sh64/ffi.lo +@PA_LINUX_TRUE@am__objects_22 = src/pa/linux.lo src/pa/ffi.lo +@PA_HPUX_TRUE@am__objects_23 = src/pa/hpux32.lo src/pa/ffi.lo +nodist_libffi_la_OBJECTS = $(am__objects_1) $(am__objects_2) \ + $(am__objects_3) $(am__objects_4) $(am__objects_5) \ + $(am__objects_6) $(am__objects_7) $(am__objects_8) \ + $(am__objects_9) $(am__objects_10) $(am__objects_11) \ + $(am__objects_12) $(am__objects_13) $(am__objects_14) \ + $(am__objects_15) $(am__objects_16) $(am__objects_17) \ + $(am__objects_18) $(am__objects_19) $(am__objects_20) \ + $(am__objects_21) $(am__objects_22) $(am__objects_23) +libffi_la_OBJECTS = $(am_libffi_la_OBJECTS) \ + $(nodist_libffi_la_OBJECTS) +libffi_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ + $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ + $(libffi_la_LDFLAGS) $(LDFLAGS) -o $@ +libffi_convenience_la_LIBADD = +am__objects_24 = src/debug.lo src/prep_cif.lo src/types.lo \ + src/raw_api.lo src/java_raw_api.lo src/closures.lo +am_libffi_convenience_la_OBJECTS = $(am__objects_24) +am__objects_25 = $(am__objects_1) $(am__objects_2) $(am__objects_3) \ + $(am__objects_4) $(am__objects_5) $(am__objects_6) \ + $(am__objects_7) $(am__objects_8) $(am__objects_9) \ + $(am__objects_10) $(am__objects_11) $(am__objects_12) \ + $(am__objects_13) $(am__objects_14) $(am__objects_15) \ + $(am__objects_16) $(am__objects_17) $(am__objects_18) \ + $(am__objects_19) $(am__objects_20) $(am__objects_21) \ + $(am__objects_22) $(am__objects_23) +nodist_libffi_convenience_la_OBJECTS = $(am__objects_25) +libffi_convenience_la_OBJECTS = $(am_libffi_convenience_la_OBJECTS) \ + $(nodist_libffi_convenience_la_OBJECTS) +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/depcomp +am__depfiles_maybe = depfiles +CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) +LTCPPASCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS) +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ +SOURCES = $(libffi_la_SOURCES) $(nodist_libffi_la_SOURCES) \ + $(libffi_convenience_la_SOURCES) \ + $(nodist_libffi_convenience_la_SOURCES) +DIST_SOURCES = $(libffi_la_SOURCES) $(libffi_convenience_la_SOURCES) +INFO_DEPS = $(srcdir)/doc/libffi.info +am__TEXINFO_TEX_DIR = $(srcdir) +DVIS = doc/libffi.dvi +PDFS = doc/libffi.pdf +PSS = doc/libffi.ps +HTMLS = doc/libffi.html +TEXINFOS = doc/libffi.texi +TEXI2DVI = texi2dvi +TEXI2PDF = $(TEXI2DVI) --pdf --batch +MAKEINFOHTML = $(MAKEINFO) --html +AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) +DVIPS = dvips +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +pkgconfigDATA_INSTALL = $(INSTALL_DATA) +DATA = $(pkgconfig_DATA) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +ALLOCA = @ALLOCA@ +AMTAR = @AMTAR@ +AM_RUNTESTFLAGS = @AM_RUNTESTFLAGS@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCAS = @CCAS@ +CCASDEPMODE = @CCASDEPMODE@ +CCASFLAGS = @CCASFLAGS@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +GREP = @GREP@ +HAVE_LONG_DOUBLE = @HAVE_LONG_DOUBLE@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +NMEDIT = @NMEDIT@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +TARGET = @TARGET@ +TARGETDIR = @TARGETDIR@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target = @target@ +target_alias = @target_alias@ +target_cpu = @target_cpu@ +target_os = @target_os@ +target_vendor = @target_vendor@ +toolexecdir = @toolexecdir@ +toolexeclibdir = @toolexeclibdir@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +AUTOMAKE_OPTIONS = foreign subdir-objects +SUBDIRS = include testsuite man +EXTRA_DIST = LICENSE ChangeLog.v1 ChangeLog.libgcj configure.host \ + src/alpha/ffi.c src/alpha/osf.S src/alpha/ffitarget.h \ + src/arm/ffi.c src/arm/sysv.S src/arm/ffitarget.h \ + src/cris/ffi.c src/cris/sysv.S src/cris/ffitarget.h \ + src/ia64/ffi.c src/ia64/ffitarget.h src/ia64/ia64_flags.h \ + src/ia64/unix.S \ + src/mips/ffi.c src/mips/n32.S src/mips/o32.S \ + src/mips/ffitarget.h \ + src/m32r/ffi.c src/m32r/sysv.S src/m32r/ffitarget.h \ + src/m68k/ffi.c src/m68k/sysv.S src/m68k/ffitarget.h \ + src/powerpc/ffi.c src/powerpc/sysv.S \ + src/powerpc/linux64.S src/powerpc/linux64_closure.S \ + src/powerpc/ppc_closure.S src/powerpc/asm.h \ + src/powerpc/aix.S src/powerpc/darwin.S \ + src/powerpc/aix_closure.S src/powerpc/darwin_closure.S \ + src/powerpc/ffi_darwin.c src/powerpc/ffitarget.h \ + src/s390/ffi.c src/s390/sysv.S src/s390/ffitarget.h \ + src/sh/ffi.c src/sh/sysv.S src/sh/ffitarget.h \ + src/sh64/ffi.c src/sh64/sysv.S src/sh64/ffitarget.h \ + src/sparc/v8.S src/sparc/v9.S src/sparc/ffitarget.h \ + src/sparc/ffi.c src/x86/darwin64.S \ + src/x86/ffi.c src/x86/sysv.S src/x86/win32.S src/x86/darwin.S \ + src/x86/freebsd.S \ + src/x86/ffi64.c src/x86/unix64.S src/x86/ffitarget.h \ + src/pa/ffitarget.h src/pa/ffi.c src/pa/linux.S src/pa/hpux32.S \ + src/frv/ffi.c src/frv/eabi.S src/frv/ffitarget.h src/dlmalloc.c \ + libtool-version ChangeLog.libffi + +info_TEXINFOS = doc/libffi.texi + +# Work around what appears to be a GNU make bug handling MAKEFLAGS +# values defined in terms of make variables, as is the case for CC and +# friends when we are called from the top level Makefile. +AM_MAKEFLAGS = \ + "AR_FLAGS=$(AR_FLAGS)" \ + "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ + "CFLAGS=$(CFLAGS)" \ + "CXXFLAGS=$(CXXFLAGS)" \ + "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \ + "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ + "INSTALL=$(INSTALL)" \ + "INSTALL_DATA=$(INSTALL_DATA)" \ + "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ + "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \ + "JC1FLAGS=$(JC1FLAGS)" \ + "LDFLAGS=$(LDFLAGS)" \ + "LIBCFLAGS=$(LIBCFLAGS)" \ + "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ + "MAKE=$(MAKE)" \ + "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ + "PICFLAG=$(PICFLAG)" \ + "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \ + "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ + "SHELL=$(SHELL)" \ + "exec_prefix=$(exec_prefix)" \ + "infodir=$(infodir)" \ + "libdir=$(libdir)" \ + "prefix=$(prefix)" \ + "AR=$(AR)" \ + "AS=$(AS)" \ + "CC=$(CC)" \ + "CXX=$(CXX)" \ + "LD=$(LD)" \ + "NM=$(NM)" \ + "RANLIB=$(RANLIB)" \ + "DESTDIR=$(DESTDIR)" + +MAKEOVERRIDES = +lib_LTLIBRARIES = libffi.la +noinst_LTLIBRARIES = libffi_convenience.la +libffi_la_SOURCES = src/debug.c src/prep_cif.c src/types.c \ + src/raw_api.c src/java_raw_api.c src/closures.c + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libffi.pc +nodist_libffi_la_SOURCES = $(am__append_1) $(am__append_2) \ + $(am__append_3) $(am__append_4) $(am__append_5) \ + $(am__append_6) $(am__append_7) $(am__append_8) \ + $(am__append_9) $(am__append_10) $(am__append_11) \ + $(am__append_12) $(am__append_13) $(am__append_14) \ + $(am__append_15) $(am__append_16) $(am__append_17) \ + $(am__append_18) $(am__append_19) $(am__append_20) \ + $(am__append_21) $(am__append_22) $(am__append_23) +libffi_convenience_la_SOURCES = $(libffi_la_SOURCES) +nodist_libffi_convenience_la_SOURCES = $(nodist_libffi_la_SOURCES) +AM_CFLAGS = -Wall -g -fexceptions +libffi_la_LDFLAGS = -version-info `grep -v '^\#' $(srcdir)/libtool-version` +AM_CPPFLAGS = -I. -I$(top_srcdir)/include -Iinclude -I$(top_srcdir)/src +AM_CCASFLAGS = $(AM_CPPFLAGS) +all: fficonfig.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +.SUFFIXES: .S .c .dvi .lo .o .obj .ps +am--refresh: + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ + cd $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +fficonfig.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/fficonfig.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status fficonfig.h +$(srcdir)/fficonfig.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f fficonfig.h stamp-h1 +libffi.pc: $(top_builddir)/config.status $(srcdir)/libffi.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ +install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) + test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ + f=$(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + else :; fi; \ + done + +uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ + echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ + $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + done + +clean-libLTLIBRARIES: + -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done + +clean-noinstLTLIBRARIES: + -test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES) + @list='$(noinst_LTLIBRARIES)'; for p in $$list; do \ + dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ + test "$$dir" != "$$p" || dir=.; \ + echo "rm -f \"$${dir}/so_locations\""; \ + rm -f "$${dir}/so_locations"; \ + done +src/$(am__dirstamp): + @$(MKDIR_P) src + @: > src/$(am__dirstamp) +src/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/$(DEPDIR) + @: > src/$(DEPDIR)/$(am__dirstamp) +src/debug.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) +src/prep_cif.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) +src/types.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) +src/raw_api.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) +src/java_raw_api.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) +src/closures.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp) +src/mips/$(am__dirstamp): + @$(MKDIR_P) src/mips + @: > src/mips/$(am__dirstamp) +src/mips/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/mips/$(DEPDIR) + @: > src/mips/$(DEPDIR)/$(am__dirstamp) +src/mips/ffi.lo: src/mips/$(am__dirstamp) \ + src/mips/$(DEPDIR)/$(am__dirstamp) +src/mips/o32.lo: src/mips/$(am__dirstamp) \ + src/mips/$(DEPDIR)/$(am__dirstamp) +src/mips/n32.lo: src/mips/$(am__dirstamp) \ + src/mips/$(DEPDIR)/$(am__dirstamp) +src/x86/$(am__dirstamp): + @$(MKDIR_P) src/x86 + @: > src/x86/$(am__dirstamp) +src/x86/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/x86/$(DEPDIR) + @: > src/x86/$(DEPDIR)/$(am__dirstamp) +src/x86/ffi.lo: src/x86/$(am__dirstamp) \ + src/x86/$(DEPDIR)/$(am__dirstamp) +src/x86/sysv.lo: src/x86/$(am__dirstamp) \ + src/x86/$(DEPDIR)/$(am__dirstamp) +src/x86/freebsd.lo: src/x86/$(am__dirstamp) \ + src/x86/$(DEPDIR)/$(am__dirstamp) +src/x86/win32.lo: src/x86/$(am__dirstamp) \ + src/x86/$(DEPDIR)/$(am__dirstamp) +src/x86/darwin.lo: src/x86/$(am__dirstamp) \ + src/x86/$(DEPDIR)/$(am__dirstamp) +src/x86/ffi64.lo: src/x86/$(am__dirstamp) \ + src/x86/$(DEPDIR)/$(am__dirstamp) +src/x86/darwin64.lo: src/x86/$(am__dirstamp) \ + src/x86/$(DEPDIR)/$(am__dirstamp) +src/sparc/$(am__dirstamp): + @$(MKDIR_P) src/sparc + @: > src/sparc/$(am__dirstamp) +src/sparc/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/sparc/$(DEPDIR) + @: > src/sparc/$(DEPDIR)/$(am__dirstamp) +src/sparc/ffi.lo: src/sparc/$(am__dirstamp) \ + src/sparc/$(DEPDIR)/$(am__dirstamp) +src/sparc/v8.lo: src/sparc/$(am__dirstamp) \ + src/sparc/$(DEPDIR)/$(am__dirstamp) +src/sparc/v9.lo: src/sparc/$(am__dirstamp) \ + src/sparc/$(DEPDIR)/$(am__dirstamp) +src/alpha/$(am__dirstamp): + @$(MKDIR_P) src/alpha + @: > src/alpha/$(am__dirstamp) +src/alpha/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/alpha/$(DEPDIR) + @: > src/alpha/$(DEPDIR)/$(am__dirstamp) +src/alpha/ffi.lo: src/alpha/$(am__dirstamp) \ + src/alpha/$(DEPDIR)/$(am__dirstamp) +src/alpha/osf.lo: src/alpha/$(am__dirstamp) \ + src/alpha/$(DEPDIR)/$(am__dirstamp) +src/ia64/$(am__dirstamp): + @$(MKDIR_P) src/ia64 + @: > src/ia64/$(am__dirstamp) +src/ia64/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/ia64/$(DEPDIR) + @: > src/ia64/$(DEPDIR)/$(am__dirstamp) +src/ia64/ffi.lo: src/ia64/$(am__dirstamp) \ + src/ia64/$(DEPDIR)/$(am__dirstamp) +src/ia64/unix.lo: src/ia64/$(am__dirstamp) \ + src/ia64/$(DEPDIR)/$(am__dirstamp) +src/m32r/$(am__dirstamp): + @$(MKDIR_P) src/m32r + @: > src/m32r/$(am__dirstamp) +src/m32r/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/m32r/$(DEPDIR) + @: > src/m32r/$(DEPDIR)/$(am__dirstamp) +src/m32r/sysv.lo: src/m32r/$(am__dirstamp) \ + src/m32r/$(DEPDIR)/$(am__dirstamp) +src/m32r/ffi.lo: src/m32r/$(am__dirstamp) \ + src/m32r/$(DEPDIR)/$(am__dirstamp) +src/m68k/$(am__dirstamp): + @$(MKDIR_P) src/m68k + @: > src/m68k/$(am__dirstamp) +src/m68k/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/m68k/$(DEPDIR) + @: > src/m68k/$(DEPDIR)/$(am__dirstamp) +src/m68k/ffi.lo: src/m68k/$(am__dirstamp) \ + src/m68k/$(DEPDIR)/$(am__dirstamp) +src/m68k/sysv.lo: src/m68k/$(am__dirstamp) \ + src/m68k/$(DEPDIR)/$(am__dirstamp) +src/powerpc/$(am__dirstamp): + @$(MKDIR_P) src/powerpc + @: > src/powerpc/$(am__dirstamp) +src/powerpc/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/powerpc/$(DEPDIR) + @: > src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/ffi.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/sysv.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/ppc_closure.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/linux64.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/linux64_closure.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/ffi_darwin.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/aix.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/aix_closure.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/darwin.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/powerpc/darwin_closure.lo: src/powerpc/$(am__dirstamp) \ + src/powerpc/$(DEPDIR)/$(am__dirstamp) +src/arm/$(am__dirstamp): + @$(MKDIR_P) src/arm + @: > src/arm/$(am__dirstamp) +src/arm/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/arm/$(DEPDIR) + @: > src/arm/$(DEPDIR)/$(am__dirstamp) +src/arm/sysv.lo: src/arm/$(am__dirstamp) \ + src/arm/$(DEPDIR)/$(am__dirstamp) +src/arm/ffi.lo: src/arm/$(am__dirstamp) \ + src/arm/$(DEPDIR)/$(am__dirstamp) +src/cris/$(am__dirstamp): + @$(MKDIR_P) src/cris + @: > src/cris/$(am__dirstamp) +src/cris/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/cris/$(DEPDIR) + @: > src/cris/$(DEPDIR)/$(am__dirstamp) +src/cris/sysv.lo: src/cris/$(am__dirstamp) \ + src/cris/$(DEPDIR)/$(am__dirstamp) +src/cris/ffi.lo: src/cris/$(am__dirstamp) \ + src/cris/$(DEPDIR)/$(am__dirstamp) +src/frv/$(am__dirstamp): + @$(MKDIR_P) src/frv + @: > src/frv/$(am__dirstamp) +src/frv/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/frv/$(DEPDIR) + @: > src/frv/$(DEPDIR)/$(am__dirstamp) +src/frv/eabi.lo: src/frv/$(am__dirstamp) \ + src/frv/$(DEPDIR)/$(am__dirstamp) +src/frv/ffi.lo: src/frv/$(am__dirstamp) \ + src/frv/$(DEPDIR)/$(am__dirstamp) +src/s390/$(am__dirstamp): + @$(MKDIR_P) src/s390 + @: > src/s390/$(am__dirstamp) +src/s390/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/s390/$(DEPDIR) + @: > src/s390/$(DEPDIR)/$(am__dirstamp) +src/s390/sysv.lo: src/s390/$(am__dirstamp) \ + src/s390/$(DEPDIR)/$(am__dirstamp) +src/s390/ffi.lo: src/s390/$(am__dirstamp) \ + src/s390/$(DEPDIR)/$(am__dirstamp) +src/x86/unix64.lo: src/x86/$(am__dirstamp) \ + src/x86/$(DEPDIR)/$(am__dirstamp) +src/sh/$(am__dirstamp): + @$(MKDIR_P) src/sh + @: > src/sh/$(am__dirstamp) +src/sh/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/sh/$(DEPDIR) + @: > src/sh/$(DEPDIR)/$(am__dirstamp) +src/sh/sysv.lo: src/sh/$(am__dirstamp) \ + src/sh/$(DEPDIR)/$(am__dirstamp) +src/sh/ffi.lo: src/sh/$(am__dirstamp) src/sh/$(DEPDIR)/$(am__dirstamp) +src/sh64/$(am__dirstamp): + @$(MKDIR_P) src/sh64 + @: > src/sh64/$(am__dirstamp) +src/sh64/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/sh64/$(DEPDIR) + @: > src/sh64/$(DEPDIR)/$(am__dirstamp) +src/sh64/sysv.lo: src/sh64/$(am__dirstamp) \ + src/sh64/$(DEPDIR)/$(am__dirstamp) +src/sh64/ffi.lo: src/sh64/$(am__dirstamp) \ + src/sh64/$(DEPDIR)/$(am__dirstamp) +src/pa/$(am__dirstamp): + @$(MKDIR_P) src/pa + @: > src/pa/$(am__dirstamp) +src/pa/$(DEPDIR)/$(am__dirstamp): + @$(MKDIR_P) src/pa/$(DEPDIR) + @: > src/pa/$(DEPDIR)/$(am__dirstamp) +src/pa/linux.lo: src/pa/$(am__dirstamp) \ + src/pa/$(DEPDIR)/$(am__dirstamp) +src/pa/ffi.lo: src/pa/$(am__dirstamp) src/pa/$(DEPDIR)/$(am__dirstamp) +src/pa/hpux32.lo: src/pa/$(am__dirstamp) \ + src/pa/$(DEPDIR)/$(am__dirstamp) +libffi.la: $(libffi_la_OBJECTS) $(libffi_la_DEPENDENCIES) + $(libffi_la_LINK) -rpath $(libdir) $(libffi_la_OBJECTS) $(libffi_la_LIBADD) $(LIBS) +libffi_convenience.la: $(libffi_convenience_la_OBJECTS) $(libffi_convenience_la_DEPENDENCIES) + $(LINK) $(libffi_convenience_la_OBJECTS) $(libffi_convenience_la_LIBADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + -rm -f src/alpha/ffi.$(OBJEXT) + -rm -f src/alpha/ffi.lo + -rm -f src/alpha/osf.$(OBJEXT) + -rm -f src/alpha/osf.lo + -rm -f src/arm/ffi.$(OBJEXT) + -rm -f src/arm/ffi.lo + -rm -f src/arm/sysv.$(OBJEXT) + -rm -f src/arm/sysv.lo + -rm -f src/closures.$(OBJEXT) + -rm -f src/closures.lo + -rm -f src/cris/ffi.$(OBJEXT) + -rm -f src/cris/ffi.lo + -rm -f src/cris/sysv.$(OBJEXT) + -rm -f src/cris/sysv.lo + -rm -f src/debug.$(OBJEXT) + -rm -f src/debug.lo + -rm -f src/frv/eabi.$(OBJEXT) + -rm -f src/frv/eabi.lo + -rm -f src/frv/ffi.$(OBJEXT) + -rm -f src/frv/ffi.lo + -rm -f src/ia64/ffi.$(OBJEXT) + -rm -f src/ia64/ffi.lo + -rm -f src/ia64/unix.$(OBJEXT) + -rm -f src/ia64/unix.lo + -rm -f src/java_raw_api.$(OBJEXT) + -rm -f src/java_raw_api.lo + -rm -f src/m32r/ffi.$(OBJEXT) + -rm -f src/m32r/ffi.lo + -rm -f src/m32r/sysv.$(OBJEXT) + -rm -f src/m32r/sysv.lo + -rm -f src/m68k/ffi.$(OBJEXT) + -rm -f src/m68k/ffi.lo + -rm -f src/m68k/sysv.$(OBJEXT) + -rm -f src/m68k/sysv.lo + -rm -f src/mips/ffi.$(OBJEXT) + -rm -f src/mips/ffi.lo + -rm -f src/mips/n32.$(OBJEXT) + -rm -f src/mips/n32.lo + -rm -f src/mips/o32.$(OBJEXT) + -rm -f src/mips/o32.lo + -rm -f src/pa/ffi.$(OBJEXT) + -rm -f src/pa/ffi.lo + -rm -f src/pa/hpux32.$(OBJEXT) + -rm -f src/pa/hpux32.lo + -rm -f src/pa/linux.$(OBJEXT) + -rm -f src/pa/linux.lo + -rm -f src/powerpc/aix.$(OBJEXT) + -rm -f src/powerpc/aix.lo + -rm -f src/powerpc/aix_closure.$(OBJEXT) + -rm -f src/powerpc/aix_closure.lo + -rm -f src/powerpc/darwin.$(OBJEXT) + -rm -f src/powerpc/darwin.lo + -rm -f src/powerpc/darwin_closure.$(OBJEXT) + -rm -f src/powerpc/darwin_closure.lo + -rm -f src/powerpc/ffi.$(OBJEXT) + -rm -f src/powerpc/ffi.lo + -rm -f src/powerpc/ffi_darwin.$(OBJEXT) + -rm -f src/powerpc/ffi_darwin.lo + -rm -f src/powerpc/linux64.$(OBJEXT) + -rm -f src/powerpc/linux64.lo + -rm -f src/powerpc/linux64_closure.$(OBJEXT) + -rm -f src/powerpc/linux64_closure.lo + -rm -f src/powerpc/ppc_closure.$(OBJEXT) + -rm -f src/powerpc/ppc_closure.lo + -rm -f src/powerpc/sysv.$(OBJEXT) + -rm -f src/powerpc/sysv.lo + -rm -f src/prep_cif.$(OBJEXT) + -rm -f src/prep_cif.lo + -rm -f src/raw_api.$(OBJEXT) + -rm -f src/raw_api.lo + -rm -f src/s390/ffi.$(OBJEXT) + -rm -f src/s390/ffi.lo + -rm -f src/s390/sysv.$(OBJEXT) + -rm -f src/s390/sysv.lo + -rm -f src/sh/ffi.$(OBJEXT) + -rm -f src/sh/ffi.lo + -rm -f src/sh/sysv.$(OBJEXT) + -rm -f src/sh/sysv.lo + -rm -f src/sh64/ffi.$(OBJEXT) + -rm -f src/sh64/ffi.lo + -rm -f src/sh64/sysv.$(OBJEXT) + -rm -f src/sh64/sysv.lo + -rm -f src/sparc/ffi.$(OBJEXT) + -rm -f src/sparc/ffi.lo + -rm -f src/sparc/v8.$(OBJEXT) + -rm -f src/sparc/v8.lo + -rm -f src/sparc/v9.$(OBJEXT) + -rm -f src/sparc/v9.lo + -rm -f src/types.$(OBJEXT) + -rm -f src/types.lo + -rm -f src/x86/darwin.$(OBJEXT) + -rm -f src/x86/darwin.lo + -rm -f src/x86/darwin64.$(OBJEXT) + -rm -f src/x86/darwin64.lo + -rm -f src/x86/ffi.$(OBJEXT) + -rm -f src/x86/ffi.lo + -rm -f src/x86/ffi64.$(OBJEXT) + -rm -f src/x86/ffi64.lo + -rm -f src/x86/freebsd.$(OBJEXT) + -rm -f src/x86/freebsd.lo + -rm -f src/x86/sysv.$(OBJEXT) + -rm -f src/x86/sysv.lo + -rm -f src/x86/unix64.$(OBJEXT) + -rm -f src/x86/unix64.lo + -rm -f src/x86/win32.$(OBJEXT) + -rm -f src/x86/win32.lo + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/closures.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/debug.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/java_raw_api.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/prep_cif.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/raw_api.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/types.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/alpha/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/alpha/$(DEPDIR)/osf.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/arm/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/arm/$(DEPDIR)/sysv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/cris/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/cris/$(DEPDIR)/sysv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/frv/$(DEPDIR)/eabi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/frv/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/ia64/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/ia64/$(DEPDIR)/unix.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/m32r/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/m32r/$(DEPDIR)/sysv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/m68k/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/m68k/$(DEPDIR)/sysv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/mips/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/mips/$(DEPDIR)/n32.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/mips/$(DEPDIR)/o32.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/pa/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/pa/$(DEPDIR)/hpux32.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/pa/$(DEPDIR)/linux.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/aix.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/aix_closure.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/darwin.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/darwin_closure.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/ffi_darwin.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/linux64.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/linux64_closure.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/ppc_closure.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/powerpc/$(DEPDIR)/sysv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/s390/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/s390/$(DEPDIR)/sysv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/sh/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/sh/$(DEPDIR)/sysv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/sh64/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/sh64/$(DEPDIR)/sysv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/sparc/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/sparc/$(DEPDIR)/v8.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/sparc/$(DEPDIR)/v9.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/darwin.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/darwin64.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/ffi.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/ffi64.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/freebsd.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/sysv.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/unix64.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@src/x86/$(DEPDIR)/win32.Plo@am__quote@ + +.S.o: +@am__fastdepCCAS_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ +@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCCAS_TRUE@ mv -f $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ $< + +.S.obj: +@am__fastdepCCAS_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ +@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ +@am__fastdepCCAS_TRUE@ mv -f $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.S.lo: +@am__fastdepCCAS_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ +@am__fastdepCCAS_TRUE@ $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCCAS_TRUE@ mv -f $$depbase.Tpo $$depbase.Plo +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCCAS_FALSE@ $(LTCPPASCOMPILE) -c -o $@ $< + +.c.o: +@am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCC_TRUE@ mv -f $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ +@am__fastdepCC_TRUE@ mv -f $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ +@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCC_TRUE@ mv -f $$depbase.Tpo $$depbase.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + -rm -rf src/.libs src/_libs + -rm -rf src/alpha/.libs src/alpha/_libs + -rm -rf src/arm/.libs src/arm/_libs + -rm -rf src/cris/.libs src/cris/_libs + -rm -rf src/frv/.libs src/frv/_libs + -rm -rf src/ia64/.libs src/ia64/_libs + -rm -rf src/m32r/.libs src/m32r/_libs + -rm -rf src/m68k/.libs src/m68k/_libs + -rm -rf src/mips/.libs src/mips/_libs + -rm -rf src/pa/.libs src/pa/_libs + -rm -rf src/powerpc/.libs src/powerpc/_libs + -rm -rf src/s390/.libs src/s390/_libs + -rm -rf src/sh/.libs src/sh/_libs + -rm -rf src/sh64/.libs src/sh64/_libs + -rm -rf src/sparc/.libs src/sparc/_libs + -rm -rf src/x86/.libs src/x86/_libs + +distclean-libtool: + -rm -f libtool +doc/$(am__dirstamp): + @$(MKDIR_P) doc + @: > doc/$(am__dirstamp) + +$(srcdir)/doc/libffi.info: doc/libffi.texi $(srcdir)/doc/version.texi + restore=: && backupdir="$(am__leading_dot)am$$$$" && \ + am__cwd=`pwd` && cd $(srcdir) && \ + rm -rf $$backupdir && mkdir $$backupdir && \ + if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ + for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ + if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ + done; \ + else :; fi && \ + cd "$$am__cwd"; \ + if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \ + -o $@ $(srcdir)/doc/libffi.texi; \ + then \ + rc=0; \ + cd $(srcdir); \ + else \ + rc=$$?; \ + cd $(srcdir) && \ + $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ + fi; \ + rm -rf $$backupdir; exit $$rc + +doc/libffi.dvi: doc/libffi.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp) + TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \ + $(TEXI2DVI) -o $@ `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi + +doc/libffi.pdf: doc/libffi.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp) + TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \ + $(TEXI2PDF) -o $@ `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi + +doc/libffi.html: doc/libffi.texi $(srcdir)/doc/version.texi doc/$(am__dirstamp) + rm -rf $(@:.html=.htp) + if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \ + -o $(@:.html=.htp) `test -f 'doc/libffi.texi' || echo '$(srcdir)/'`doc/libffi.texi; \ + then \ + rm -rf $@; \ + if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ + mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ + else \ + if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ + rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ + exit 1; \ + fi +$(srcdir)/doc/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/doc/stamp-vti +$(srcdir)/doc/stamp-vti: doc/libffi.texi $(top_srcdir)/configure + test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp) + @(dir=.; test -f ./doc/libffi.texi || dir=$(srcdir); \ + set `$(SHELL) $(srcdir)/mdate-sh $$dir/doc/libffi.texi`; \ + echo "@set UPDATED $$1 $$2 $$3"; \ + echo "@set UPDATED-MONTH $$2 $$3"; \ + echo "@set EDITION $(VERSION)"; \ + echo "@set VERSION $(VERSION)") > vti.tmp + @cmp -s vti.tmp $(srcdir)/doc/version.texi \ + || (echo "Updating $(srcdir)/doc/version.texi"; \ + cp vti.tmp $(srcdir)/doc/version.texi) + -@rm -f vti.tmp + @cp $(srcdir)/doc/version.texi $@ + +mostlyclean-vti: + -rm -f vti.tmp + +maintainer-clean-vti: +@MAINTAINER_MODE_TRUE@ -rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi +.dvi.ps: + TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ + $(DVIPS) -o $@ $< + +uninstall-dvi-am: + @$(NORMAL_UNINSTALL) + @list='$(DVIS)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ + rm -f "$(DESTDIR)$(dvidir)/$$f"; \ + done + +uninstall-html-am: + @$(NORMAL_UNINSTALL) + @list='$(HTMLS)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ + rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ + done + +uninstall-info-am: + @$(PRE_UNINSTALL) + @if test -d '$(DESTDIR)$(infodir)' && \ + (install-info --version && \ + install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ + install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ + done; \ + else :; fi + @$(NORMAL_UNINSTALL) + @list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ + (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ + echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ + rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ + else :; fi); \ + done + +uninstall-pdf-am: + @$(NORMAL_UNINSTALL) + @list='$(PDFS)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ + rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ + done + +uninstall-ps-am: + @$(NORMAL_UNINSTALL) + @list='$(PSS)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ + rm -f "$(DESTDIR)$(psdir)/$$f"; \ + done + +dist-info: $(INFO_DEPS) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + list='$(INFO_DEPS)'; \ + for base in $$list; do \ + case $$base in \ + $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ + esac; \ + if test -f $$base; then d=.; else d=$(srcdir); fi; \ + base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ + for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ + if test -f $$file; then \ + relfile=`expr "$$file" : "$$d/\(.*\)"`; \ + test -f $(distdir)/$$relfile || \ + cp -p $$file $(distdir)/$$relfile; \ + else :; fi; \ + done; \ + done + +mostlyclean-aminfo: + -rm -rf libffi.aux libffi.cp libffi.cps libffi.fn libffi.ky libffi.log \ + libffi.pg libffi.tmp libffi.toc libffi.tp libffi.vr \ + doc/libffi.dvi doc/libffi.pdf doc/libffi.ps doc/libffi.html + +maintainer-clean-aminfo: + @list='$(INFO_DEPS)'; for i in $$list; do \ + i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ + echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ + rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ + done +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" + @list='$(pkgconfig_DATA)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ + $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; for p in $$list; do \ + f=$(am__strip_dir) \ + echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ + rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ + done + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) fficonfig.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) fficonfig.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) fficonfig.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) fficonfig.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d $(distdir) || mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-info + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) $(DATA) fficonfig.h +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(pkgconfigdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -rm -f doc/$(am__dirstamp) + -rm -f src/$(DEPDIR)/$(am__dirstamp) + -rm -f src/$(am__dirstamp) + -rm -f src/alpha/$(DEPDIR)/$(am__dirstamp) + -rm -f src/alpha/$(am__dirstamp) + -rm -f src/arm/$(DEPDIR)/$(am__dirstamp) + -rm -f src/arm/$(am__dirstamp) + -rm -f src/cris/$(DEPDIR)/$(am__dirstamp) + -rm -f src/cris/$(am__dirstamp) + -rm -f src/frv/$(DEPDIR)/$(am__dirstamp) + -rm -f src/frv/$(am__dirstamp) + -rm -f src/ia64/$(DEPDIR)/$(am__dirstamp) + -rm -f src/ia64/$(am__dirstamp) + -rm -f src/m32r/$(DEPDIR)/$(am__dirstamp) + -rm -f src/m32r/$(am__dirstamp) + -rm -f src/m68k/$(DEPDIR)/$(am__dirstamp) + -rm -f src/m68k/$(am__dirstamp) + -rm -f src/mips/$(DEPDIR)/$(am__dirstamp) + -rm -f src/mips/$(am__dirstamp) + -rm -f src/pa/$(DEPDIR)/$(am__dirstamp) + -rm -f src/pa/$(am__dirstamp) + -rm -f src/powerpc/$(DEPDIR)/$(am__dirstamp) + -rm -f src/powerpc/$(am__dirstamp) + -rm -f src/s390/$(DEPDIR)/$(am__dirstamp) + -rm -f src/s390/$(am__dirstamp) + -rm -f src/sh/$(DEPDIR)/$(am__dirstamp) + -rm -f src/sh/$(am__dirstamp) + -rm -f src/sh64/$(DEPDIR)/$(am__dirstamp) + -rm -f src/sh64/$(am__dirstamp) + -rm -f src/sparc/$(DEPDIR)/$(am__dirstamp) + -rm -f src/sparc/$(am__dirstamp) + -rm -f src/x86/$(DEPDIR)/$(am__dirstamp) + -rm -f src/x86/$(am__dirstamp) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ + clean-noinstLTLIBRARIES mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf src/$(DEPDIR) src/alpha/$(DEPDIR) src/arm/$(DEPDIR) src/cris/$(DEPDIR) src/frv/$(DEPDIR) src/ia64/$(DEPDIR) src/m32r/$(DEPDIR) src/m68k/$(DEPDIR) src/mips/$(DEPDIR) src/pa/$(DEPDIR) src/powerpc/$(DEPDIR) src/s390/$(DEPDIR) src/sh/$(DEPDIR) src/sh64/$(DEPDIR) src/sparc/$(DEPDIR) src/x86/$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: $(DVIS) + +html: html-recursive + +html-am: $(HTMLS) + +info: info-recursive + +info-am: $(INFO_DEPS) + +install-data-am: install-info-am install-pkgconfigDATA + +install-dvi: install-dvi-recursive + +install-dvi-am: $(DVIS) + @$(NORMAL_INSTALL) + test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)" + @list='$(DVIS)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \ + $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \ + done +install-exec-am: install-libLTLIBRARIES + +install-html-am: $(HTMLS) + @$(NORMAL_INSTALL) + test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)" + @list='$(HTMLS)'; for p in $$list; do \ + if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + if test -d "$$d$$p"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ + $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ + echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \ + $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \ + else \ + echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \ + $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \ + fi; \ + done +install-info: install-info-recursive + +install-info-am: $(INFO_DEPS) + @$(NORMAL_INSTALL) + test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + esac; \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ + for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ + $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ + if test -f $$ifile; then \ + relfile=`echo "$$ifile" | sed 's|^.*/||'`; \ + echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \ + $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \ + else : ; fi; \ + done; \ + done + @$(POST_INSTALL) + @if (install-info --version && \ + install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \ + list='$(INFO_DEPS)'; \ + for file in $$list; do \ + relfile=`echo "$$file" | sed 's|^.*/||'`; \ + echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ + install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ + done; \ + else : ; fi +install-man: + +install-pdf-am: $(PDFS) + @$(NORMAL_INSTALL) + test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)" + @list='$(PDFS)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \ + $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \ + done +install-ps: install-ps-recursive + +install-ps-am: $(PSS) + @$(NORMAL_INSTALL) + test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)" + @list='$(PSS)'; for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + f=$(am__strip_dir) \ + echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(psdir)/$$f'"; \ + $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(psdir)/$$f"; \ + done +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf src/$(DEPDIR) src/alpha/$(DEPDIR) src/arm/$(DEPDIR) src/cris/$(DEPDIR) src/frv/$(DEPDIR) src/ia64/$(DEPDIR) src/m32r/$(DEPDIR) src/m68k/$(DEPDIR) src/mips/$(DEPDIR) src/pa/$(DEPDIR) src/powerpc/$(DEPDIR) src/s390/$(DEPDIR) src/sh/$(DEPDIR) src/sh64/$(DEPDIR) src/sparc/$(DEPDIR) src/x86/$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-aminfo \ + maintainer-clean-generic maintainer-clean-vti + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \ + mostlyclean-generic mostlyclean-libtool mostlyclean-vti + +pdf: pdf-recursive + +pdf-am: $(PDFS) + +ps: ps-recursive + +ps-am: $(PSS) + +uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \ + uninstall-libLTLIBRARIES uninstall-pdf-am \ + uninstall-pkgconfigDATA uninstall-ps-am + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + clean-libLTLIBRARIES clean-libtool clean-noinstLTLIBRARIES \ + ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ + dist-info dist-lzma dist-shar dist-tarZ dist-zip distcheck \ + distclean distclean-compile distclean-generic distclean-hdr \ + distclean-libtool distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am \ + install-libLTLIBRARIES install-man install-pdf install-pdf-am \ + install-pkgconfigDATA install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs installdirs-am \ + maintainer-clean maintainer-clean-aminfo \ + maintainer-clean-generic maintainer-clean-vti mostlyclean \ + mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool mostlyclean-vti pdf pdf-am ps ps-am tags \ + tags-recursive uninstall uninstall-am uninstall-dvi-am \ + uninstall-html-am uninstall-info-am uninstall-libLTLIBRARIES \ + uninstall-pdf-am uninstall-pkgconfigDATA uninstall-ps-am + + +# No install-html or install-pdf support in automake yet +.PHONY: install-html install-pdf +install-html: +install-pdf: +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/toolkit/components/js-ctypes/src/libffi/README b/toolkit/components/js-ctypes/src/libffi/README new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/README @@ -0,0 +1,336 @@ +Status +====== + +libffi-3.0.8 was released on December 19, 2008. Check the libffi web +page for updates: . + + +What is libffi? +=============== + +Compilers for high level languages generate code that follow certain +conventions. These conventions are necessary, in part, for separate +compilation to work. One such convention is the "calling convention". +The "calling convention" is a set of assumptions made by the compiler +about where function arguments will be found on entry to a function. +A "calling convention" also specifies where the return value for a +function is found. + +Some programs may not know at the time of compilation what arguments +are to be passed to a function. For instance, an interpreter may be +told at run-time about the number and types of arguments used to call +a given function. Libffi can be used in such programs to provide a +bridge from the interpreter program to compiled code. + +The libffi library provides a portable, high level programming +interface to various calling conventions. This allows a programmer to +call any function specified by a call interface description at run +time. + +FFI stands for Foreign Function Interface. A foreign function +interface is the popular name for the interface that allows code +written in one language to call code written in another language. The +libffi library really only provides the lowest, machine dependent +layer of a fully featured foreign function interface. A layer must +exist above libffi that handles type conversions for values passed +between the two languages. + + +Supported Platforms +=================== + +Libffi has been ported to many different platforms, although this +release was only tested on: + + arm oabi linux + arm eabi linux + hppa linux + mips o32 linux (little endian) + powerpc darwin + powerpc freebsd + powerpc64 linux + sparc solaris + sparc64 freebsd + sparc64 solaris + x86 cygwin + x86 darwin + x86 freebsd + x86 linux + x86 openbsd + x86 solaris + x86-64 darwin + x86-64 linux + x86-64 OS X + x86-64 freebsd + x86-64 solaris + +Please send additional platform test results to +libffi-discuss@sourceware.org. + +Installing libffi +================= + +[Note: before actually performing any of these installation steps, + you may wish to read the "Platform Specific Notes" below.] + +First you must configure the distribution for your particular +system. Go to the directory you wish to build libffi in and run the +"configure" program found in the root directory of the libffi source +distribution. + +You may want to tell configure where to install the libffi library and +header files. To do that, use the --prefix configure switch. Libffi +will install under /usr/local by default. + +If you want to enable extra run-time debugging checks use the the +--enable-debug configure switch. This is useful when your program dies +mysteriously while using libffi. + +Another useful configure switch is --enable-purify-safety. Using this +will add some extra code which will suppress certain warnings when you +are using Purify with libffi. Only use this switch when using +Purify, as it will slow down the library. + +Configure has many other options. Use "configure --help" to see them all. + +Once configure has finished, type "make". Note that you must be using +GNU make. You can ftp GNU make from prep.ai.mit.edu:/pub/gnu. + +To ensure that libffi is working as advertised, type "make check". +This will require that you have DejaGNU installed. + +To install the library and header files, type "make install". + + +Platform Specific Notes +======================= + + MIPS - Irix 5.3 & 6.x + --------------------- + +Irix 6.2 and better supports three different calling conventions: o32, +n32 and n64. Currently, libffi only supports both o32 and n32 under +Irix 6.x, but only o32 under Irix 5.3. Libffi will automatically be +configured for whichever calling convention it was built for. + +By default, the configure script will try to build libffi with the GNU +development tools. To build libffi with the SGI development tools, set +the environment variable CC to either "cc -32" or "cc -n32" before +running configure under Irix 6.x (depending on whether you want an o32 +or n32 library), or just "cc" for Irix 5.3. + +With the n32 calling convention, when returning structures smaller +than 16 bytes, be sure to provide an RVALUE that is 8 byte aligned. +Here's one way of forcing this: + + double struct_storage[2]; + my_small_struct *s = (my_small_struct *) struct_storage; + /* Use s for RVALUE */ + +If you don't do this you are liable to get spurious bus errors. + +"long long" values are not supported yet. + +You must use GNU Make to build libffi on SGI platforms. + + + PowerPC System V ABI + -------------------- + +There are two `System V ABI's which libffi implements for PowerPC. +They differ only in how small structures are returned from functions. + +In the FFI_SYSV version, structures that are 8 bytes or smaller are +returned in registers. This is what GCC does when it is configured +for solaris, and is what the System V ABI I have (dated September +1995) says. + +In the FFI_GCC_SYSV version, all structures are returned the same way: +by passing a pointer as the first argument to the function. This is +what GCC does when it is configured for linux or a generic sysv +target. + +EGCS 1.0.1 (and probably other versions of EGCS/GCC) also has a +inconsistency with the SysV ABI: When a procedure is called with many +floating-point arguments, some of them get put on the stack. They are +all supposed to be stored in double-precision format, even if they are +only single-precision, but EGCS stores single-precision arguments as +single-precision anyway. This causes one test to fail (the `many +arguments' test). + + +History +======= + +3.0.7 Nov-11-08 + Fix for ppc FreeBSD. + (thanks to Andreas Tobler) + +3.0.6 Jul-17-08 + Fix for closures on sh. + Mark the sh/sh64 stack as non-executable. + (both thanks to Kaz Kojima) + +3.0.5 Apr-3-08 + Fix libffi.pc file. + Fix #define ARM for IcedTea users. + Fix x86 closure bug. + +3.0.4 Feb-24-08 + Fix x86 OpenBSD configury. + +3.0.3 Feb-22-08 + Enable x86 OpenBSD thanks to Thomas Heller, and + x86-64 FreeBSD thanks to Björn König and Andreas Tobler. + Clean up test instruction in README. + +3.0.2 Feb-21-08 + Improved x86 FreeBSD support. + Thanks to Björn König. + +3.0.1 Feb-15-08 + Fix instruction cache flushing bug on MIPS. + Thanks to David Daney. + +3.0.0 Feb-15-08 + Many changes, mostly thanks to the GCC project. + Cygnus Solutions is now Red Hat. + + [10 years go by...] + +1.20 Oct-5-98 + Raffaele Sena produces ARM port. + +1.19 Oct-5-98 + Fixed x86 long double and long long return support. + m68k bug fixes from Andreas Schwab. + Patch for DU assembler compatibility for the Alpha from Richard + Henderson. + +1.18 Apr-17-98 + Bug fixes and MIPS configuration changes. + +1.17 Feb-24-98 + Bug fixes and m68k port from Andreas Schwab. PowerPC port from + Geoffrey Keating. Various bug x86, Sparc and MIPS bug fixes. + +1.16 Feb-11-98 + Richard Henderson produces Alpha port. + +1.15 Dec-4-97 + Fixed an n32 ABI bug. New libtool, auto* support. + +1.14 May-13-97 + libtool is now used to generate shared and static libraries. + Fixed a minor portability problem reported by Russ McManus + . + +1.13 Dec-2-96 + Added --enable-purify-safety to keep Purify from complaining + about certain low level code. + Sparc fix for calling functions with < 6 args. + Linux x86 a.out fix. + +1.12 Nov-22-96 + Added missing ffi_type_void, needed for supporting void return + types. Fixed test case for non MIPS machines. Cygnus Support + is now Cygnus Solutions. + +1.11 Oct-30-96 + Added notes about GNU make. + +1.10 Oct-29-96 + Added configuration fix for non GNU compilers. + +1.09 Oct-29-96 + Added --enable-debug configure switch. Clean-ups based on LCLint + feedback. ffi_mips.h is always installed. Many configuration + fixes. Fixed ffitest.c for sparc builds. + +1.08 Oct-15-96 + Fixed n32 problem. Many clean-ups. + +1.07 Oct-14-96 + Gordon Irlam rewrites v8.S again. Bug fixes. + +1.06 Oct-14-96 + Gordon Irlam improved the sparc port. + +1.05 Oct-14-96 + Interface changes based on feedback. + +1.04 Oct-11-96 + Sparc port complete (modulo struct passing bug). + +1.03 Oct-10-96 + Passing struct args, and returning struct values works for + all architectures/calling conventions. Expanded tests. + +1.02 Oct-9-96 + Added SGI n32 support. Fixed bugs in both o32 and Linux support. + Added "make test". + +1.01 Oct-8-96 + Fixed float passing bug in mips version. Restructured some + of the code. Builds cleanly with SGI tools. + +1.00 Oct-7-96 + First release. No public announcement. + + +Authors & Credits +================= + +libffi was originally written by Anthony Green . + +The developers of the GNU Compiler Collection project have made +innumerable valuable contributions. See the ChangeLog file for +details. + +Some of the ideas behind libffi were inspired by Gianni Mariani's free +gencall library for Silicon Graphics machines. + +The closure mechanism was designed and implemented by Kresten Krab +Thorup. + +Major processor architecture ports were contributed by the following +developers: + +alpha Richard Henderson +arm Raffaele Sena +cris Simon Posnjak, Hans-Peter Nilsson +frv Anthony Green +ia64 Hans Boehm +m32r Kazuhiro Inaoka +m68k Andreas Schwab +mips Anthony Green, Casey Marshall +mips64 David Daney +pa Randolph Chung, Dave Anglin, Andreas Tobler +powerpc Geoffrey Keating, Andreas Tobler, + David Edelsohn, John Hornkvist +powerpc64 Jakub Jelinek +s390 Gerhard Tonn, Ulrich Weigand +sh Kaz Kojima +sh64 Kaz Kojima +sparc Anthony Green, Gordon Irlam +x86 Anthony Green, Jon Beniston +x86-64 Bo Thorsen + +Jesper Skov and Andrew Haley both did more than their fair share of +stepping through the code and tracking down bugs. + +Thanks also to Tom Tromey for bug fixes, documentation and +configuration help. + +Thanks to Jim Blandy, who provided some useful feedback on the libffi +interface. + +Andreas Tobler has done a tremendous amount of work on the testsuite. + +Alex Oliva solved the executable page problem for SElinux. + +The list above is almost certainly incomplete and inaccurate. I'm +happy to make corrections or additions upon request. + +If you have a problem, or have found a bug, please send a note to +green@redhat.com. diff --git a/toolkit/components/js-ctypes/src/libffi/config.guess b/toolkit/components/js-ctypes/src/libffi/config.guess new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/config.guess @@ -0,0 +1,1516 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, +# Inc. + +timestamp='2007-05-17' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:* | ix86xen:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:[3456]*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T | authenticamd) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + xtensa:Linux:*:*) + echo xtensa-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^LIBC/{ + s: ::g + p + }'`" + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/toolkit/components/js-ctypes/src/libffi/config.sub b/toolkit/components/js-ctypes/src/libffi/config.sub new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/config.sub @@ -0,0 +1,1626 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, +# Inc. + +timestamp='2007-04-29' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | mt \ + | msp430 \ + | nios | nios2 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | score \ + | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16c) + basic_machine=cr16c-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/toolkit/components/js-ctypes/src/libffi/configure b/toolkit/components/js-ctypes/src/libffi/configure new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/configure @@ -0,0 +1,25139 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.63 for libffi 3.0.8. +# +# Report bugs to . +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell bug-autoconf@gnu.org about your system, + echo including any error possibly output before this message. + echo This can help us improve future autoconf versions. + echo Configuration will now proceed without shell functions. +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +echo=${ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH + +if test -z "$ECHO"; then +if test "X${echo_test_string+set}" != Xset; then +# find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if (echo_test_string=`eval $cmd`) 2>/dev/null && + echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + + +tagnames=${tagnames+${tagnames},}CXX + +tagnames=${tagnames+${tagnames},}F77 + +exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Identity of this package. +PACKAGE_NAME='libffi' +PACKAGE_TARNAME='libffi' +PACKAGE_VERSION='3.0.8' +PACKAGE_STRING='libffi 3.0.8' +PACKAGE_BUGREPORT='http://gcc.gnu.org/bugs.html' + +# Factoring default headers for most tests. +ac_includes_default="\ +#include +#ifdef HAVE_SYS_TYPES_H +# include +#endif +#ifdef HAVE_SYS_STAT_H +# include +#endif +#ifdef STDC_HEADERS +# include +# include +#else +# ifdef HAVE_STDLIB_H +# include +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include +# endif +# include +#endif +#ifdef HAVE_STRINGS_H +# include +#endif +#ifdef HAVE_INTTYPES_H +# include +#endif +#ifdef HAVE_STDINT_H +# include +#endif +#ifdef HAVE_UNISTD_H +# include +#endif" + +ac_subst_vars='LTLIBOBJS +LIBOBJS +toolexeclibdir +toolexecdir +TARGETDIR +TARGET +HAVE_LONG_DOUBLE +ALLOCA +PA64_HPUX_FALSE +PA64_HPUX_TRUE +PA_HPUX_FALSE +PA_HPUX_TRUE +PA_LINUX_FALSE +PA_LINUX_TRUE +SH64_FALSE +SH64_TRUE +SH_FALSE +SH_TRUE +X86_64_FALSE +X86_64_TRUE +S390_FALSE +S390_TRUE +FRV_FALSE +FRV_TRUE +LIBFFI_CRIS_FALSE +LIBFFI_CRIS_TRUE +ARM_FALSE +ARM_TRUE +POWERPC_FREEBSD_FALSE +POWERPC_FREEBSD_TRUE +POWERPC_DARWIN_FALSE +POWERPC_DARWIN_TRUE +POWERPC_AIX_FALSE +POWERPC_AIX_TRUE +POWERPC_FALSE +POWERPC_TRUE +M68K_FALSE +M68K_TRUE +M32R_FALSE +M32R_TRUE +IA64_FALSE +IA64_TRUE +ALPHA_FALSE +ALPHA_TRUE +X86_DARWIN_FALSE +X86_DARWIN_TRUE +X86_WIN32_FALSE +X86_WIN32_TRUE +X86_FREEBSD_FALSE +X86_FREEBSD_TRUE +X86_FALSE +X86_TRUE +SPARC_FALSE +SPARC_TRUE +MIPS_FALSE +MIPS_TRUE +AM_RUNTESTFLAGS +TESTSUBDIR_FALSE +TESTSUBDIR_TRUE +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +LIBTOOL +ac_ct_F77 +FFLAGS +F77 +CXXCPP +am__fastdepCXX_FALSE +am__fastdepCXX_TRUE +CXXDEPMODE +ac_ct_CXX +CXXFLAGS +CXX +CPP +NMEDIT +DSYMUTIL +RANLIB +AR +ECHO +LN_S +EGREP +GREP +SED +am__fastdepCCAS_FALSE +am__fastdepCCAS_TRUE +CCASDEPMODE +CCASFLAGS +CCAS +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_os +target_vendor +target_cpu +target +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_dependency_tracking +enable_shared +enable_static +enable_fast_install +with_gnu_ld +enable_libtool_lock +with_pic +with_tags +enable_maintainer_mode +enable_debug +enable_structs +enable_raw_api +enable_purify_safety +' + ac_precious_vars='build_alias +host_alias +target_alias +CCAS +CCASFLAGS +CPP +CPPFLAGS +CXX +CXXFLAGS +LDFLAGS +LIBS +CCC +CXXCPP +F77 +FFLAGS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { $as_echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { $as_echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 + { (exit 1); exit 1; }; } ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { $as_echo "$as_me: error: working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures libffi 3.0.8 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root [DATAROOTDIR/doc/libffi] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] + --target=TARGET configure for building compilers for TARGET [HOST] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of libffi 3.0.8:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer + --enable-debug debugging mode + --disable-structs omit code for struct support + --disable-raw-api make the raw api unavailable + --enable-purify-safety purify-safe mode + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-tags[=TAGS] include additional configurations [automatic] + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + CCAS assembler compiler command (defaults to CC) + CCASFLAGS assembler compiler flags (defaults to CFLAGS) + CPP C preprocessor + CXX C++ compiler command + CXXFLAGS C++ compiler flags + CXXCPP C++ preprocessor + F77 Fortran 77 compiler command + FFLAGS Fortran 77 compiler flags + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +libffi configure 3.0.8 +generated by GNU Autoconf 2.63 + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by libffi $as_me 3.0.8, which was +generated by GNU Autoconf 2.63. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" +done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + ac_site_file1=$CONFIG_SITE +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test -r "$ac_site_file"; then + { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + + + + + + + + + + + + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +ac_config_headers="$ac_config_headers fficonfig.h" + + +ac_aux_dir= +for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 +$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if test "${ac_cv_build+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +$as_echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if test "${ac_cv_host+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +$as_echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:$LINENO: checking target system type" >&5 +$as_echo_n "checking target system type... " >&6; } +if test "${ac_cv_target+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "x$target_alias" = x; then + ac_cv_target=$ac_cv_host +else + ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +$as_echo "$ac_cv_target" >&6; } +case $ac_cv_target in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 +$as_echo "$as_me: error: invalid value of canonical target" >&2;} + { (exit 1); exit 1; }; };; +esac +target=$ac_cv_target +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_target +shift +target_cpu=$1 +target_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +target_os=$* +IFS=$ac_save_IFS +case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + +# The aliases save the names the user supplied, while $host etc. +# will get canonicalized. +test -n "$target_alias" && + test "$program_prefix$program_suffix$program_transform_name" = \ + NONENONEs,x,x, && + program_prefix=${target_alias}- +target_alias=${target_alias-$host_alias} + +. ${srcdir}/configure.host + +am__api_version='1.10' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + +done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +$as_echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done +done +IFS=$as_save_IFS + +fi + + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:$LINENO: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='libffi' + VERSION='3.0.8' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + + +# The same as in boehm-gc and libstdc++. Have to borrow it from there. +# We must force CC to /not/ be precious variables; otherwise +# the wrong, non-multilib-adjusted value will be used in multilibs. +# As a side effect, we have to subst CFLAGS ourselves. + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { (ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi + +{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +if test -z "$ac_file"; then + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } +fi + +ac_exeext=$ac_cv_exeext + +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + fi + fi +fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +rm -f conftest$ac_cv_exeext +{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if test "${ac_cv_objext+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if test "${ac_cv_c_compiler_gnu+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if test "${ac_cv_prog_cc_g+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:$LINENO: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:$LINENO: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi + + +{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + + + + +# By default we simply use the C compiler to build assembly code. + +test "${CCAS+set}" = set || CCAS=$CC +test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS + + + +depcc="$CCAS" am_compiler_list= + +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CCAS_dependencies_compiler_type+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CCAS_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CCAS_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CCAS_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_CCAS_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; } +CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then + am__fastdepCCAS_TRUE= + am__fastdepCCAS_FALSE='#' +else + am__fastdepCCAS_TRUE='#' + am__fastdepCCAS_FALSE= +fi + + +if test "x$CC" != xcc; then + { $as_echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5 +$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; } +else + { $as_echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5 +$as_echo_n "checking whether cc understands -c and -o together... " >&6; } +fi +set dummy $CC; ac_cc=`$as_echo "$2" | + sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +# Make sure it works both with $CC and with simple cc. +# We do the test twice because some compilers refuse to overwrite an +# existing .o file with -o, though they will create one. +ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5' +rm -f conftest2.* +if { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + test -f conftest2.$ac_objext && { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; +then + eval ac_cv_prog_cc_${ac_cc}_c_o=yes + if test "x$CC" != xcc; then + # Test first that cc exists at all. + if { ac_try='cc -c conftest.$ac_ext >&5' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5' + rm -f conftest2.* + if { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + test -f conftest2.$ac_objext && { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; + then + # cc works too. + : + else + # cc exists but doesn't like -o. + eval ac_cv_prog_cc_${ac_cc}_c_o=no + fi + fi + fi +else + eval ac_cv_prog_cc_${ac_cc}_c_o=no +fi +rm -f core conftest* + +fi +if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + +cat >>confdefs.h <<\_ACEOF +#define NO_MINUS_C_MINUS_O 1 +_ACEOF + +fi + +# FIXME: we rely on the cache variable name because +# there is no other way. +set dummy $CC +ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'` +if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi + + +# Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + +# Check whether --enable-static was given. +if test "${enable_static+set}" = set; then + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + +# Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + +{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if test "${lt_cv_path_SED+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done + +fi + +SED=$lt_cv_path_SED + +{ $as_echo "$as_me:$LINENO: result: $SED" >&5 +$as_echo "$SED" >&6; } + +{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if test "${lt_cv_path_LD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if test "${lt_cv_prog_gnu_ld+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + +{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if test "${lt_cv_ld_reload_flag+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + +{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 +$as_echo_n "checking for BSD-compatible nm... " >&6; } +if test "${lt_cv_path_NM+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +NM="$lt_cv_path_NM" + +{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if test "${lt_cv_deplibs_check_method+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx*) + lt_cv_deplibs_check_method=unknown + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 4800 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + libsuff=64 + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if test "${lt_cv_cc_needs_belf+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_cc_needs_belf=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_cc_needs_belf=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + + +esac + +need_locks="$enable_libtool_lock" + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +for ac_header in dlfcn.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +$as_echo_n "checking $ac_header usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +$as_echo_n "checking $ac_header presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ------------------------------------------- ## +## Report this to http://gcc.gnu.org/bugs.html ## +## ------------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + +fi +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +if test -z "$CXX"; then + if test -n "$CCC"; then + CXX=$CCC + else + if test -n "$ac_tool_prefix"; then + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CXX+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CXX"; then + ac_cv_prog_CXX="$CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CXX=$ac_cv_prog_CXX +if test -n "$CXX"; then + { $as_echo "$as_me:$LINENO: result: $CXX" >&5 +$as_echo "$CXX" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CXX" && break + done +fi +if test -z "$CXX"; then + ac_ct_CXX=$CXX + for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CXX"; then + ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CXX="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CXX=$ac_cv_prog_ac_ct_CXX +if test -n "$ac_ct_CXX"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 +$as_echo "$ac_ct_CXX" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CXX" && break +done + + if test "x$ac_ct_CXX" = x; then + CXX="g++" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CXX=$ac_ct_CXX + fi +fi + + fi +fi +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 +$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; } +if test "${ac_cv_cxx_compiler_gnu+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 +$as_echo "$ac_cv_cxx_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GXX=yes +else + GXX= +fi +ac_test_CXXFLAGS=${CXXFLAGS+set} +ac_save_CXXFLAGS=$CXXFLAGS +{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 +$as_echo_n "checking whether $CXX accepts -g... " >&6; } +if test "${ac_cv_prog_cxx_g+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_save_cxx_werror_flag=$ac_cxx_werror_flag + ac_cxx_werror_flag=yes + ac_cv_prog_cxx_g=no + CXXFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cxx_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CXXFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cxx_werror_flag=$ac_save_cxx_werror_flag + CXXFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cxx_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cxx_werror_flag=$ac_save_cxx_werror_flag +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 +$as_echo "$ac_cv_prog_cxx_g" >&6; } +if test "$ac_test_CXXFLAGS" = set; then + CXXFLAGS=$ac_save_CXXFLAGS +elif test $ac_cv_prog_cxx_g = yes; then + if test "$GXX" = yes; then + CXXFLAGS="-g -O2" + else + CXXFLAGS="-g" + fi +else + if test "$GXX" = yes; then + CXXFLAGS="-O2" + else + CXXFLAGS= + fi +fi +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +depcc="$CXX" am_compiler_list= + +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CXX_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CXX_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CXX_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; } +CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then + am__fastdepCXX_TRUE= + am__fastdepCXX_FALSE='#' +else + am__fastdepCXX_TRUE='#' + am__fastdepCXX_FALSE= +fi + + + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +$as_echo_n "checking how to run the C++ preprocessor... " >&6; } +if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CXXCPP=$CXXCPP + +fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP +fi +{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5 +$as_echo "$CXXCPP" >&6; } +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +fi + + +ac_ext=f +ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_f77_compiler_gnu +if test -n "$ac_tool_prefix"; then + for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_F77+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$F77"; then + ac_cv_prog_F77="$F77" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_F77="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +F77=$ac_cv_prog_F77 +if test -n "$F77"; then + { $as_echo "$as_me:$LINENO: result: $F77" >&5 +$as_echo "$F77" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$F77" && break + done +fi +if test -z "$F77"; then + ac_ct_F77=$F77 + for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_F77+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_F77"; then + ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_F77="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_F77=$ac_cv_prog_ac_ct_F77 +if test -n "$ac_ct_F77"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 +$as_echo "$ac_ct_F77" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_F77" && break +done + + if test "x$ac_ct_F77" = x; then + F77="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + F77=$ac_ct_F77 + fi +fi + + +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +rm -f a.out + +# If we don't use `.F' as extension, the preprocessor is not run on the +# input file. (Note that this only needs to work for GNU compilers.) +ac_save_ext=$ac_ext +ac_ext=F +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 +$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; } +if test "${ac_cv_f77_compiler_gnu+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF + program main +#ifndef __GNUC__ + choke me +#endif + + end +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_f77_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 +$as_echo "$ac_cv_f77_compiler_gnu" >&6; } +ac_ext=$ac_save_ext +ac_test_FFLAGS=${FFLAGS+set} +ac_save_FFLAGS=$FFLAGS +FFLAGS= +{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 +$as_echo_n "checking whether $F77 accepts -g... " >&6; } +if test "${ac_cv_prog_f77_g+set}" = set; then + $as_echo_n "(cached) " >&6 +else + FFLAGS=-g +cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_f77_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_prog_f77_g=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 +$as_echo "$ac_cv_prog_f77_g" >&6; } +if test "$ac_test_FFLAGS" = set; then + FFLAGS=$ac_save_FFLAGS +elif test $ac_cv_prog_f77_g = yes; then + if test "x$ac_cv_f77_compiler_gnu" = xyes; then + FFLAGS="-g -O2" + else + FFLAGS="-g" + fi +else + if test "x$ac_cv_f77_compiler_gnu" = xyes; then + FFLAGS="-O2" + else + FFLAGS= + fi +fi + +if test $ac_compiler_gnu = yes; then + G77=yes +else + G77= +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +# find the maximum length of command line arguments +{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if test "${lt_cv_sys_max_cmd_len+set}" = set; then + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ + = "XX$teststring") >/dev/null 2>&1 && + new_result=`expr "X$teststring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= + # Add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. + # It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:$LINENO: result: none" >&5 +$as_echo "none" >&6; } +fi + + + + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32*) + symcode='[ABCDGISTW]' + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +linux* | k*bsd*-gnu) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if grep ' nm_test_var$' "$nlist" >/dev/null; then + if grep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +lt_preloaded_symbols[] = +{ +EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:$LINENO: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:$LINENO: result: ok" >&5 +$as_echo "ok" >&6; } +fi + +{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if test "${lt_cv_objdir+set}" = set; then + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e 1s/^X//' +sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AR+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:$LINENO: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_RANLIB+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$SED" && SED=sed +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:$LINENO: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + + { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if test "${lt_cv_apple_cc_single_mod+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + echo "int foo(void){return 1;}" > conftest.c + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib ${wl}-single_module conftest.c + if test -f libconftest.dylib; then + lt_cv_apple_cc_single_mod=yes + rm -rf libconftest.dylib* + fi + rm conftest.c + fi +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if test "${lt_cv_ld_exported_symbols_list+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_ld_exported_symbols_list=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_ld_exported_symbols_list=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + case $host_os in + rhapsody* | darwin1.[0123]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}" + fi + if test "$DSYMUTIL" != ":"; then + _lt_dsymutil="~$DSYMUTIL \$lib || :" + else + _lt_dsymutil= + fi + ;; + esac + + +enable_dlopen=no +enable_win32_dll=no + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then + withval=$with_pic; pic_mode="$withval" +else + pic_mode=default +fi + +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm -r conftest* + + + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + +{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7886: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:7890: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + +lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic='-qnocommon' + lt_prog_compiler_wl='-Wl,' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + esac + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +$as_echo "$lt_prog_compiler_pic" >&6; } + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + +{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if test "${lt_cv_prog_compiler_pic_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:8176: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:8180: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_cv_prog_compiler_static_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $rm -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + +{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:8280: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:8284: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + enable_shared_with_static_runtimes=no + archive_cmds= + archive_expsym_cmds= + old_archive_From_new_cmds= + old_archive_from_expsyms_cmds= + export_dynamic_flag_spec= + whole_archive_flag_spec= + thread_safe_flag_spec= + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_direct=no + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + link_all_deplibs=unknown + hardcode_automatic=no + module_cmds= + module_expsym_cmds= + always_export_symbols=no + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + *) + tmp_sharedflag='-shared' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; + + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + whole_archive_flag_spec='' + link_all_deplibs=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' + module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs=no + ;; + esac + fi + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + hardcode_direct=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld='-rpath $libdir' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z text' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + fi + +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $rm conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc=no + else + archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +$as_echo "$archive_cmds_need_lc" >&6; } + ;; + esac + fi + ;; +esac + +{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + sys_lib_search_path_spec=`echo $lt_search_path_spec` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" +fi + +sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" +fi + +sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || \ + test -n "$runpath_var" || \ + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + +striplib= +old_striplib= +{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + ;; + *) + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dl_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 +$as_echo_n "checking for shl_load... " >&6; } +if test "${ac_cv_func_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case declares shl_load. + For example, HP-UX 11i declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef shl_load + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_shl_load || defined __stub___shl_load +choke me +#endif + +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_shl_load=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_shl_load=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +$as_echo "$ac_cv_func_shl_load" >&6; } +if test "x$ac_cv_func_shl_load" = x""yes; then + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dld_shl_load=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_shl_load=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = x""yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 +$as_echo_n "checking for dlopen... " >&6; } +if test "${ac_cv_func_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case declares dlopen. + For example, HP-UX 11i declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef dlopen + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_dlopen || defined __stub___dlopen +choke me +#endif + +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +$as_echo "$ac_cv_func_dlopen" >&6; } +if test "x$ac_cv_func_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dl_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if test "${ac_cv_lib_svld_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_svld_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_svld_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if test "${ac_cv_lib_dld_dld_link+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dld_dld_link=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_dld_link=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = x""yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self_static+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + exit (status); +} +EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + +# Report which library types will actually be built +{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } +{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + +{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case $host_os in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + +{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler \ + CC \ + LD \ + lt_prog_compiler_wl \ + lt_prog_compiler_pic \ + lt_prog_compiler_static \ + lt_prog_compiler_no_builtin_flag \ + export_dynamic_flag_spec \ + thread_safe_flag_spec \ + whole_archive_flag_spec \ + enable_shared_with_static_runtimes \ + old_archive_cmds \ + old_archive_from_new_cmds \ + predep_objects \ + postdep_objects \ + predeps \ + postdeps \ + compiler_lib_search_path \ + compiler_lib_search_dirs \ + archive_cmds \ + archive_expsym_cmds \ + postinstall_cmds \ + postuninstall_cmds \ + old_archive_from_expsyms_cmds \ + allow_undefined_flag \ + no_undefined_flag \ + export_symbols_cmds \ + hardcode_libdir_flag_spec \ + hardcode_libdir_flag_spec_ld \ + hardcode_libdir_separator \ + hardcode_automatic \ + module_cmds \ + module_expsym_cmds \ + lt_cv_prog_compiler_c_o \ + fix_srcfile_path \ + exclude_expsyms \ + include_expsyms; do + + case $var in + old_archive_cmds | \ + old_archive_from_new_cmds | \ + archive_cmds | \ + archive_expsym_cmds | \ + module_cmds | \ + module_expsym_cmds | \ + old_archive_from_expsyms_cmds | \ + export_symbols_cmds | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="${ofile}T" + trap "$rm \"$cfgfile\"; exit 1" 1 2 15 + $rm -f "$cfgfile" + { $as_echo "$as_me:$LINENO: creating $ofile" >&5 +$as_echo "$as_me: creating $ofile" >&6;} + + cat <<__EOF__ >> "$cfgfile" +#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="$SED -e 1s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU C compiler? +with_gcc=$GCC + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps + +# The directories searched by this compiler when creating a shared +# library +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# ### END LIBTOOL CONFIG + +__EOF__ + + + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + +# Check whether --with-tags was given. +if test "${with_tags+set}" = set; then + withval=$with_tags; tagnames="$withval" +fi + + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 +$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 +$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} + else + { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 +$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} + fi + fi + if test -z "$LTCFLAGS"; then + eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in + "") ;; + *) { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 +$as_echo "$as_me: error: invalid tag name: $tagname" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 +$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} + { (exit 1); exit 1; }; } + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + + +archive_cmds_need_lc_CXX=no +allow_undefined_flag_CXX= +always_export_symbols_CXX=no +archive_expsym_cmds_CXX= +export_dynamic_flag_spec_CXX= +hardcode_direct_CXX=no +hardcode_libdir_flag_spec_CXX= +hardcode_libdir_flag_spec_ld_CXX= +hardcode_libdir_separator_CXX= +hardcode_minus_L_CXX=no +hardcode_shlibpath_var_CXX=unsupported +hardcode_automatic_CXX=no +module_cmds_CXX= +module_expsym_cmds_CXX= +link_all_deplibs_CXX=unknown +old_archive_cmds_CXX=$old_archive_cmds +no_undefined_flag_CXX= +whole_archive_flag_spec_CXX= +enable_shared_with_static_runtimes_CXX=no + +# Dependencies to place before and after the object being linked: +predep_objects_CXX= +postdep_objects_CXX= +predeps_CXX= +postdeps_CXX= +compiler_lib_search_path_CXX= +compiler_lib_search_dirs_CXX= + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +objext_CXX=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int, char *[]) { return(0); }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm -r conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_LD=$LD +lt_save_GCC=$GCC +GCC=$GXX +lt_save_with_gnu_ld=$with_gnu_ld +lt_save_path_LD=$lt_cv_path_LD +if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx +else + $as_unset lt_cv_prog_gnu_ld +fi +if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX +else + $as_unset lt_cv_path_LD +fi +test -z "${LDCXX+set}" || LD=$LDCXX +CC=${CXX-"c++"} +compiler=$CC +compiler_CXX=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' +else + lt_prog_compiler_no_builtin_flag_CXX= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if test "${lt_cv_path_LD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if test "${lt_cv_prog_gnu_ld+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 &5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_CXX= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } +ld_shlibs_CXX=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_CXX='' + hardcode_direct_CXX=yes + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct_CXX=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_CXX=yes + hardcode_libdir_flag_spec_CXX='-L$libdir' + hardcode_libdir_separator_CXX= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_CXX=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_CXX='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + + archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_CXX="-z nodefs" + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_cxx_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_CXX=' ${wl}-bernotok' + allow_undefined_flag_CXX=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_CXX='$convenience' + archive_cmds_need_lc_CXX=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_CXX=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_CXX=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_CXX='-L$libdir' + allow_undefined_flag_CXX=unsupported + always_export_symbols_CXX=no + enable_shared_with_static_runtimes_CXX=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_CXX=no + fi + ;; + darwin* | rhapsody*) + archive_cmds_need_lc_CXX=no + hardcode_direct_CXX=no + hardcode_automatic_CXX=yes + hardcode_shlibpath_var_CXX=unsupported + whole_archive_flag_spec_CXX='' + link_all_deplibs_CXX=yes + allow_undefined_flag_CXX="$_lt_dar_allow_undefined" + if test "$GXX" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + if test "$lt_cv_apple_cc_single_mod" != "yes"; then + archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' + module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_CXX=no + ;; + esac + fi + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + ld_shlibs_CXX=no + ;; + freebsd-elf*) + archive_cmds_need_lc_CXX=no + ;; + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + ld_shlibs_CXX=yes + ;; + gnu*) + ;; + hpux9*) + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + export_dynamic_flag_spec_CXX='${wl}-E' + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + case $host_cpu in + hppa*64*|ia64*) ;; + *) + export_dynamic_flag_spec_CXX='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + ;; + *) + hardcode_direct_CXX=yes + hardcode_minus_L_CXX=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + interix[3-9]*) + hardcode_direct_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi + fi + link_all_deplibs_CXX=yes + ;; + esac + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + ;; + linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc*) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + archive_cmds_need_lc_CXX=no + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_CXX='${wl}--export-dynamic' + whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + hardcode_libdir_flag_spec_CXX='-R$libdir' + whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + m88k*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + openbsd2*) + # C++ shared libraries are fairly broken + ld_shlibs_CXX=no + ;; + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no + archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + export_dynamic_flag_spec_CXX='${wl}-E' + whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd='echo' + else + ld_shlibs_CXX=no + fi + ;; + osf3*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx*) + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' + hardcode_libdir_separator_CXX=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + cxx*) + allow_undefined_flag_CXX=' -expect_unresolved \*' + archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ + $rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-rpath $libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_CXX=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' + + else + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + archive_cmds_need_lc_CXX=yes + no_undefined_flag_CXX=' -zdefs' + archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + hardcode_libdir_flag_spec_CXX='-R$libdir' + hardcode_shlibpath_var_CXX=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract' + ;; + esac + link_all_deplibs_CXX=yes + + output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + no_undefined_flag_CXX=' ${wl}-z ${wl}defs' + if $CC --version | grep -v '^2\.7' > /dev/null; then + archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" + fi + + hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag_CXX='${wl}-z,text' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + # So that behaviour is only enabled if SCOABSPATH is set to a + # non-empty value in the environment. Most likely only useful for + # creating official distributions of packages. + # This is a hack until libtool officially supports absolute path + # names for shared libraries. + no_undefined_flag_CXX='${wl}-z,text' + allow_undefined_flag_CXX='${wl}-z,nodefs' + archive_cmds_need_lc_CXX=no + hardcode_shlibpath_var_CXX=no + hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator_CXX=':' + link_all_deplibs_CXX=yes + export_dynamic_flag_spec_CXX='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; + *) + # FIXME: insert proper C++ library support + ld_shlibs_CXX=no + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } +test "$ld_shlibs_CXX" = no && can_build_shared=no + +GCC_CXX="$GXX" +LD_CXX="$LD" + +cat > conftest.$ac_ext <&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + # The `*' in the case matches for architectures that use `case' in + # $output_verbose_cmd can trigger glob expansion during the loop + # eval without this substitution. + output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` + + for p in `eval $output_verbose_link_cmd`; do + case $p in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" \ + || test $p = "-R"; then + prev=$p + continue + else + prev= + fi + + if test "$pre_test_object_deps_done" = no; then + case $p in + -L* | -R*) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$compiler_lib_search_path_CXX"; then + compiler_lib_search_path_CXX="${prev}${p}" + else + compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$postdeps_CXX"; then + postdeps_CXX="${prev}${p}" + else + postdeps_CXX="${postdeps_CXX} ${prev}${p}" + fi + fi + ;; + + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$predep_objects_CXX"; then + predep_objects_CXX="$p" + else + predep_objects_CXX="$predep_objects_CXX $p" + fi + else + if test -z "$postdep_objects_CXX"; then + postdep_objects_CXX="$p" + else + postdep_objects_CXX="$postdep_objects_CXX $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling CXX test program" +fi + +$rm -f confest.$objext + +compiler_lib_search_dirs_CXX= +if test -n "$compiler_lib_search_path_CXX"; then + compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi + +# PORTME: override above test on systems where it is broken +case $host_os in +interix[3-9]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + predep_objects_CXX= + postdep_objects_CXX= + postdeps_CXX= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + # + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + if test "$solaris_use_stlport4" != yes; then + postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + postdeps_CXX='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac + +case " $postdeps_CXX " in +*" -lc "*) archive_cmds_need_lc_CXX=no ;; +esac + +lt_prog_compiler_wl_CXX= +lt_prog_compiler_pic_CXX= +lt_prog_compiler_static_CXX= + +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic_CXX='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_CXX='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + lt_prog_compiler_pic_CXX= + ;; + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_CXX=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + ;; + *) + lt_prog_compiler_pic_CXX='-fPIC' + ;; + esac + else + case $host_os in + aix[4-9]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_CXX='-Bstatic' + else + lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_CXX='-qnocommon' + lt_prog_compiler_wl_CXX='-Wl,' + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++*) + lt_prog_compiler_pic_CXX='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + lt_prog_compiler_pic_CXX='+Z' + fi + ;; + aCC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_CXX='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_static_CXX='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + lt_prog_compiler_wl_CXX='--backend -Wl,' + lt_prog_compiler_pic_CXX='-fPIC' + ;; + icpc* | ecpc*) + # Intel C++ + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler. + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-fpic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + lt_prog_compiler_pic_CXX='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + lt_prog_compiler_wl_CXX='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + lt_prog_compiler_pic_CXX='-pic' + ;; + cxx*) + # Digital/Compaq C++ + lt_prog_compiler_wl_CXX='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + lt_prog_compiler_pic_CXX= + lt_prog_compiler_static_CXX='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + lt_prog_compiler_wl_CXX='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + lt_prog_compiler_pic_CXX='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + lt_prog_compiler_pic_CXX='-pic' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + lcc*) + # Lucid + lt_prog_compiler_pic_CXX='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + lt_prog_compiler_pic_CXX='-KPIC' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + lt_prog_compiler_wl_CXX='-Wl,' + lt_prog_compiler_pic_CXX='-KPIC' + lt_prog_compiler_static_CXX='-Bstatic' + ;; + esac + ;; + vxworks*) + ;; + *) + lt_prog_compiler_can_build_shared_CXX=no + ;; + esac + fi + +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 +$as_echo "$lt_prog_compiler_pic_CXX" >&6; } + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_CXX"; then + +{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; } +if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works_CXX=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:13191: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:13195: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works_CXX=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then + case $lt_prog_compiler_pic_CXX in + "" | " "*) ;; + *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; + esac +else + lt_prog_compiler_pic_CXX= + lt_prog_compiler_can_build_shared_CXX=no +fi + +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_CXX= + ;; + *) + lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" + ;; +esac + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works_CXX=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works_CXX=yes + fi + else + lt_cv_prog_compiler_static_works_CXX=yes + fi + fi + $rm -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; } + +if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then + : +else + lt_prog_compiler_static_CXX= +fi + + +{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_CXX=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:13295: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:13299: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_CXX=yes + fi + fi + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; } + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + case $host_os in + aix[4-9]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + export_symbols_cmds_CXX="$ltdll_cmds" + ;; + cygwin* | mingw*) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + ;; + *) + export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac + exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 +$as_echo "$ld_shlibs_CXX" >&6; } +test "$ld_shlibs_CXX" = no && can_build_shared=no + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_CXX" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_CXX=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_CXX in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $rm conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_CXX + pic_flag=$lt_prog_compiler_pic_CXX + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_CXX + allow_undefined_flag_CXX= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_CXX=no + else + archive_cmds_need_lc_CXX=yes + fi + allow_undefined_flag_CXX=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 +$as_echo "$archive_cmds_need_lc_CXX" >&6; } + ;; + esac + fi + ;; +esac + +{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" + +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" +fi + +sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" +fi + +sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_CXX= +if test -n "$hardcode_libdir_flag_spec_CXX" || \ + test -n "$runpath_var_CXX" || \ + test "X$hardcode_automatic_CXX" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_CXX" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && + test "$hardcode_minus_L_CXX" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_CXX=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_CXX=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_CXX=unsupported +fi +{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 +$as_echo "$hardcode_action_CXX" >&6; } + +if test "$hardcode_action_CXX" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_CXX \ + CC_CXX \ + LD_CXX \ + lt_prog_compiler_wl_CXX \ + lt_prog_compiler_pic_CXX \ + lt_prog_compiler_static_CXX \ + lt_prog_compiler_no_builtin_flag_CXX \ + export_dynamic_flag_spec_CXX \ + thread_safe_flag_spec_CXX \ + whole_archive_flag_spec_CXX \ + enable_shared_with_static_runtimes_CXX \ + old_archive_cmds_CXX \ + old_archive_from_new_cmds_CXX \ + predep_objects_CXX \ + postdep_objects_CXX \ + predeps_CXX \ + postdeps_CXX \ + compiler_lib_search_path_CXX \ + compiler_lib_search_dirs_CXX \ + archive_cmds_CXX \ + archive_expsym_cmds_CXX \ + postinstall_cmds_CXX \ + postuninstall_cmds_CXX \ + old_archive_from_expsyms_cmds_CXX \ + allow_undefined_flag_CXX \ + no_undefined_flag_CXX \ + export_symbols_cmds_CXX \ + hardcode_libdir_flag_spec_CXX \ + hardcode_libdir_flag_spec_ld_CXX \ + hardcode_libdir_separator_CXX \ + hardcode_automatic_CXX \ + module_cmds_CXX \ + module_expsym_cmds_CXX \ + lt_cv_prog_compiler_c_o_CXX \ + fix_srcfile_path_CXX \ + exclude_expsyms_CXX \ + include_expsyms_CXX; do + + case $var in + old_archive_cmds_CXX | \ + old_archive_from_new_cmds_CXX | \ + archive_cmds_CXX | \ + archive_expsym_cmds_CXX | \ + module_cmds_CXX | \ + module_expsym_cmds_CXX | \ + old_archive_from_expsyms_cmds_CXX | \ + export_symbols_cmds_CXX | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_CXX + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler_CXX + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_CXX + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_CXX + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_CXX + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_CXX +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_CXX + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_CXX +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_CXX +archive_expsym_cmds=$lt_archive_expsym_cmds_CXX +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_CXX +module_expsym_cmds=$lt_module_expsym_cmds_CXX + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_CXX + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_CXX + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_CXX + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_CXX + +# The directories searched by this compiler when creating a shared +# library +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_CXX + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_CXX + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_CXX + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_CXX + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_CXX + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_CXX + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_CXX + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_CXX + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_CXX + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_CXX + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_CXX + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_CXX + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC=$lt_save_CC +LDCXX=$LD +LD=$lt_save_LD +GCC=$lt_save_GCC +with_gnu_ldcxx=$with_gnu_ld +with_gnu_ld=$lt_save_with_gnu_ld +lt_cv_path_LDCXX=$lt_cv_path_LD +lt_cv_path_LD=$lt_save_path_LD +lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld +lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld + + else + tagname="" + fi + ;; + + F77) + if test -n "$F77" && test "X$F77" != "Xno"; then + +ac_ext=f +ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' +ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_f77_compiler_gnu + + +archive_cmds_need_lc_F77=no +allow_undefined_flag_F77= +always_export_symbols_F77=no +archive_expsym_cmds_F77= +export_dynamic_flag_spec_F77= +hardcode_direct_F77=no +hardcode_libdir_flag_spec_F77= +hardcode_libdir_flag_spec_ld_F77= +hardcode_libdir_separator_F77= +hardcode_minus_L_F77=no +hardcode_automatic_F77=no +module_cmds_F77= +module_expsym_cmds_F77= +link_all_deplibs_F77=unknown +old_archive_cmds_F77=$old_archive_cmds +no_undefined_flag_F77= +whole_archive_flag_spec_F77= +enable_shared_with_static_runtimes_F77=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +objext_F77=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="\ + subroutine t + return + end +" + +# Code to be used in simple link tests +lt_simple_link_test_code="\ + program t + end +" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm -r conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${F77-"f77"} +compiler=$CC +compiler_F77=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } +{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + +{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case $host_os in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; +aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + +{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + +GCC_F77="$G77" +LD_F77="$LD" + +lt_prog_compiler_wl_F77= +lt_prog_compiler_pic_F77= +lt_prog_compiler_static_F77= + +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_static_F77='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_F77='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic_F77='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_F77='-fno-common' + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared_F77=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_F77=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_F77='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic_F77='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl_F77='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_F77='-Bstatic' + else + lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_F77='-qnocommon' + lt_prog_compiler_wl_F77='-Wl,' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic_F77='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_F77='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_F77='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static_F77='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl_F77='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static_F77='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-fpic' + lt_prog_compiler_static_F77='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl_F77='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_F77='-non_shared' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + lt_prog_compiler_wl_F77='-Wl,' + ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + lt_prog_compiler_wl_F77='' + ;; + esac + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl_F77='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static_F77='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static_F77='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl_F77='-Qoption ld ';; + *) + lt_prog_compiler_wl_F77='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl_F77='-Qoption ld ' + lt_prog_compiler_pic_F77='-PIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic_F77='-Kconform_pic' + lt_prog_compiler_static_F77='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_pic_F77='-KPIC' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl_F77='-Wl,' + lt_prog_compiler_can_build_shared_F77=no + ;; + + uts4*) + lt_prog_compiler_pic_F77='-pic' + lt_prog_compiler_static_F77='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared_F77=no + ;; + esac + fi + +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 +$as_echo "$lt_prog_compiler_pic_F77" >&6; } + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_F77"; then + +{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; } +if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works_F77=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_F77" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:14880: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:14884: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works_F77=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then + case $lt_prog_compiler_pic_F77 in + "" | " "*) ;; + *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; + esac +else + lt_prog_compiler_pic_F77= + lt_prog_compiler_can_build_shared_F77=no +fi + +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_F77= + ;; + *) + lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" + ;; +esac + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works_F77=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works_F77=yes + fi + else + lt_cv_prog_compiler_static_works_F77=yes + fi + fi + $rm -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5 +$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; } + +if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then + : +else + lt_prog_compiler_static_F77= +fi + + +{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_F77=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:14984: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:14988: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_F77=yes + fi + fi + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; } + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag_F77= + enable_shared_with_static_runtimes_F77=no + archive_cmds_F77= + archive_expsym_cmds_F77= + old_archive_From_new_cmds_F77= + old_archive_from_expsyms_cmds_F77= + export_dynamic_flag_spec_F77= + whole_archive_flag_spec_F77= + thread_safe_flag_spec_F77= + hardcode_libdir_flag_spec_F77= + hardcode_libdir_flag_spec_ld_F77= + hardcode_libdir_separator_F77= + hardcode_direct_F77=no + hardcode_minus_L_F77=no + hardcode_shlibpath_var_F77=unsupported + link_all_deplibs_F77=unknown + hardcode_automatic_F77=no + module_cmds_F77= + module_expsym_cmds_F77= + always_export_symbols_F77=no + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms_F77= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs_F77=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_F77='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_F77= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_F77=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs_F77=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_F77=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_F77=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_F77='-L$libdir' + allow_undefined_flag_F77=unsupported + always_export_symbols_F77=no + enable_shared_with_static_runtimes_F77=yes + export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_F77=no + fi + ;; + + interix[3-9]*) + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + export_dynamic_flag_spec_F77='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + *) + tmp_sharedflag='-shared' ;; + esac + archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + else + ld_shlibs_F77=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_F77=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs_F77=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_F77=no + fi + ;; + esac + + if test "$ld_shlibs_F77" = no; then + runpath_var= + hardcode_libdir_flag_spec_F77= + export_dynamic_flag_spec_F77= + whole_archive_flag_spec_F77= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag_F77=unsupported + always_export_symbols_F77=yes + archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_F77=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_F77=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_F77='' + hardcode_direct_F77=yes + hardcode_libdir_separator_F77=':' + link_all_deplibs_F77=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct_F77=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_F77=yes + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_libdir_separator_F77= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_F77=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_F77='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_F77="-z nodefs" + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF + program main + + end +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_f77_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_F77=' ${wl}-bernotok' + allow_undefined_flag_F77=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_F77='$convenience' + archive_cmds_need_lc_F77=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + # see comment about different semantics on the GNU ld section + ld_shlibs_F77=no + ;; + + bsdi[45]*) + export_dynamic_flag_spec_F77=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_F77=' ' + allow_undefined_flag_F77=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_F77='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path_F77='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_F77=yes + ;; + + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc_F77=no + hardcode_direct_F77=no + hardcode_automatic_F77=yes + hardcode_shlibpath_var_F77=unsupported + whole_archive_flag_spec_F77='' + link_all_deplibs_F77=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' + module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_F77=no + ;; + esac + fi + ;; + + dgux*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_shlibpath_var_F77=no + ;; + + freebsd1*) + ld_shlibs_F77=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_minus_L_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_direct_F77=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + + hardcode_direct_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_F77=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld_F77='+b $libdir' + hardcode_direct_F77=no + hardcode_shlibpath_var_F77=no + ;; + *) + hardcode_direct_F77=yes + export_dynamic_flag_spec_F77='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_F77=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' + fi + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + link_all_deplibs_F77=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + newsos6) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + hardcode_shlibpath_var_F77=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct_F77=yes + hardcode_shlibpath_var_F77=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + export_dynamic_flag_spec_F77='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-R$libdir' + ;; + *) + archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs_F77=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_minus_L_F77=yes + allow_undefined_flag_F77=unsupported + archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag_F77=' -expect_unresolved \*' + archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_F77=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag_F77=' -expect_unresolved \*' + archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_F77='-rpath $libdir' + fi + hardcode_libdir_separator_F77=: + ;; + + solaris*) + no_undefined_flag_F77=' -z text' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + wlarc='' + archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec_F77='-R$libdir' + hardcode_shlibpath_var_F77=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs_F77=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_direct_F77=yes + hardcode_minus_L_F77=yes + hardcode_shlibpath_var_F77=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds_F77='$CC -r -o $output$reload_objs' + hardcode_direct_F77=no + ;; + motorola) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_F77=no + ;; + + sysv4.3*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + export_dynamic_flag_spec_F77='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_F77=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs_F77=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag_F77='${wl}-z,text' + archive_cmds_need_lc_F77=no + hardcode_shlibpath_var_F77=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_F77='${wl}-z,text' + allow_undefined_flag_F77='${wl}-z,nodefs' + archive_cmds_need_lc_F77=no + hardcode_shlibpath_var_F77=no + hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator_F77=':' + link_all_deplibs_F77=yes + export_dynamic_flag_spec_F77='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_F77='-L$libdir' + hardcode_shlibpath_var_F77=no + ;; + + *) + ld_shlibs_F77=no + ;; + esac + fi + +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 +$as_echo "$ld_shlibs_F77" >&6; } +test "$ld_shlibs_F77" = no && can_build_shared=no + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_F77" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_F77=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_F77 in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $rm conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_F77 + pic_flag=$lt_prog_compiler_pic_F77 + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_F77 + allow_undefined_flag_F77= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_F77=no + else + archive_cmds_need_lc_F77=yes + fi + allow_undefined_flag_F77=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 +$as_echo "$archive_cmds_need_lc_F77" >&6; } + ;; + esac + fi + ;; +esac + +{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" + +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" +fi + +sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" +fi + +sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_F77= +if test -n "$hardcode_libdir_flag_spec_F77" || \ + test -n "$runpath_var_F77" || \ + test "X$hardcode_automatic_F77" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_F77" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && + test "$hardcode_minus_L_F77" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_F77=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_F77=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_F77=unsupported +fi +{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 +$as_echo "$hardcode_action_F77" >&6; } + +if test "$hardcode_action_F77" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_F77 \ + CC_F77 \ + LD_F77 \ + lt_prog_compiler_wl_F77 \ + lt_prog_compiler_pic_F77 \ + lt_prog_compiler_static_F77 \ + lt_prog_compiler_no_builtin_flag_F77 \ + export_dynamic_flag_spec_F77 \ + thread_safe_flag_spec_F77 \ + whole_archive_flag_spec_F77 \ + enable_shared_with_static_runtimes_F77 \ + old_archive_cmds_F77 \ + old_archive_from_new_cmds_F77 \ + predep_objects_F77 \ + postdep_objects_F77 \ + predeps_F77 \ + postdeps_F77 \ + compiler_lib_search_path_F77 \ + compiler_lib_search_dirs_F77 \ + archive_cmds_F77 \ + archive_expsym_cmds_F77 \ + postinstall_cmds_F77 \ + postuninstall_cmds_F77 \ + old_archive_from_expsyms_cmds_F77 \ + allow_undefined_flag_F77 \ + no_undefined_flag_F77 \ + export_symbols_cmds_F77 \ + hardcode_libdir_flag_spec_F77 \ + hardcode_libdir_flag_spec_ld_F77 \ + hardcode_libdir_separator_F77 \ + hardcode_automatic_F77 \ + module_cmds_F77 \ + module_expsym_cmds_F77 \ + lt_cv_prog_compiler_c_o_F77 \ + fix_srcfile_path_F77 \ + exclude_expsyms_F77 \ + include_expsyms_F77; do + + case $var in + old_archive_cmds_F77 | \ + old_archive_from_new_cmds_F77 | \ + archive_cmds_F77 | \ + archive_expsym_cmds_F77 | \ + module_cmds_F77 | \ + module_expsym_cmds_F77 | \ + old_archive_from_expsyms_cmds_F77 | \ + export_symbols_cmds_F77 | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_F77 + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler_F77 + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_F77 + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_F77 + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_F77 + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_F77 +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_F77 + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_F77 +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_F77 +archive_expsym_cmds=$lt_archive_expsym_cmds_F77 +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_F77 +module_expsym_cmds=$lt_module_expsym_cmds_F77 + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_F77 + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_F77 + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_F77 + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_F77 + +# The directories searched by this compiler when creating a shared +# library +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77 + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_F77 + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_F77 + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_F77 + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_F77 + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_F77 + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_F77 + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_F77 + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_F77 + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_F77 + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_F77 + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_F77 + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_F77 + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + else + tagname="" + fi + ;; + + GCJ) + if test -n "$GCJ" && test "X$GCJ" != "Xno"; then + + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +objext_GCJ=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm -r conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${GCJ-"gcj"} +compiler=$CC +compiler_GCJ=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +archive_cmds_need_lc_GCJ=no + +old_archive_cmds_GCJ=$old_archive_cmds + + +lt_prog_compiler_no_builtin_flag_GCJ= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' + + +{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:17201: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:17205: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" +else + : +fi + +fi + +lt_prog_compiler_wl_GCJ= +lt_prog_compiler_pic_GCJ= +lt_prog_compiler_static_GCJ= + +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_static_GCJ='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_GCJ='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic_GCJ='-fno-common' + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared_GCJ=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic_GCJ=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_GCJ='-fPIC' + ;; + esac + ;; + + *) + lt_prog_compiler_pic_GCJ='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl_GCJ='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static_GCJ='-Bstatic' + else + lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' + fi + ;; + darwin*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + case $cc_basename in + xlc*) + lt_prog_compiler_pic_GCJ='-qnocommon' + lt_prog_compiler_wl_GCJ='-Wl,' + ;; + esac + ;; + + mingw* | cygwin* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl_GCJ='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic_GCJ='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl_GCJ='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + + newsos6) + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + linux* | k*bsd*-gnu) + case $cc_basename in + icc* | ecc*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-fpic' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl_GCJ='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + lt_prog_compiler_wl_GCJ='-Wl,' + ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + lt_prog_compiler_wl_GCJ='' + ;; + esac + ;; + esac + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl_GCJ='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static_GCJ='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static_GCJ='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl_GCJ='-Qoption ld ';; + *) + lt_prog_compiler_wl_GCJ='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl_GCJ='-Qoption ld ' + lt_prog_compiler_pic_GCJ='-PIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic_GCJ='-Kconform_pic' + lt_prog_compiler_static_GCJ='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_pic_GCJ='-KPIC' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl_GCJ='-Wl,' + lt_prog_compiler_can_build_shared_GCJ=no + ;; + + uts4*) + lt_prog_compiler_pic_GCJ='-pic' + lt_prog_compiler_static_GCJ='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared_GCJ=no + ;; + esac + fi + +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 +$as_echo "$lt_prog_compiler_pic_GCJ" >&6; } + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic_GCJ"; then + +{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; } +if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works_GCJ=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic_GCJ" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:17491: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:17495: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works_GCJ=yes + fi + fi + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then + case $lt_prog_compiler_pic_GCJ in + "" | " "*) ;; + *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; + esac +else + lt_prog_compiler_pic_GCJ= + lt_prog_compiler_can_build_shared_GCJ=no +fi + +fi +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic_GCJ= + ;; + *) + lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" + ;; +esac + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works_GCJ=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works_GCJ=yes + fi + else + lt_cv_prog_compiler_static_works_GCJ=yes + fi + fi + $rm -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5 +$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; } + +if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then + : +else + lt_prog_compiler_static_GCJ= +fi + + +{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o_GCJ=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:17595: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:17599: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o_GCJ=yes + fi + fi + chmod u+w . 2>&5 + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files + $rm out/* && rmdir out + cd .. + rmdir conftest + $rm conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 +$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; } + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + +{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag_GCJ= + enable_shared_with_static_runtimes_GCJ=no + archive_cmds_GCJ= + archive_expsym_cmds_GCJ= + old_archive_From_new_cmds_GCJ= + old_archive_from_expsyms_cmds_GCJ= + export_dynamic_flag_spec_GCJ= + whole_archive_flag_spec_GCJ= + thread_safe_flag_spec_GCJ= + hardcode_libdir_flag_spec_GCJ= + hardcode_libdir_flag_spec_ld_GCJ= + hardcode_libdir_separator_GCJ= + hardcode_direct_GCJ=no + hardcode_minus_L_GCJ=no + hardcode_shlibpath_var_GCJ=unsupported + link_all_deplibs_GCJ=unknown + hardcode_automatic_GCJ=no + module_cmds_GCJ= + module_expsym_cmds_GCJ= + always_export_symbols_GCJ=no + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms_GCJ= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + # Just being paranoid about ensuring that cc_basename is set. + for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs_GCJ=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' + export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec_GCJ= + fi + supports_anon_versioning=no + case `$LD -v 2>/dev/null` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs_GCJ=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + ld_shlibs_GCJ=no + ;; + + beos*) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag_GCJ=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec_GCJ='-L$libdir' + allow_undefined_flag_GCJ=unsupported + always_export_symbols_GCJ=no + enable_shared_with_static_runtimes_GCJ=yes + export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs_GCJ=no + fi + ;; + + interix[3-9]*) + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + export_dynamic_flag_spec_GCJ='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | k*bsd*-gnu) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + tmp_addflag= + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + *) + tmp_sharedflag='-shared' ;; + esac + archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test $supports_anon_versioning = yes; then + archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + $echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + else + ld_shlibs_GCJ=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + ld_shlibs_GCJ=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs_GCJ=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs_GCJ=no + fi + ;; + esac + + if test "$ld_shlibs_GCJ" = no; then + runpath_var= + hardcode_libdir_flag_spec_GCJ= + export_dynamic_flag_spec_GCJ= + whole_archive_flag_spec_GCJ= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag_GCJ=unsupported + always_export_symbols_GCJ=yes + archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L_GCJ=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct_GCJ=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | grep 'GNU' > /dev/null; then + export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds_GCJ='' + hardcode_direct_GCJ=yes + hardcode_libdir_separator_GCJ=':' + link_all_deplibs_GCJ=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct_GCJ=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L_GCJ=yes + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_libdir_separator_GCJ= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols_GCJ=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag_GCJ='-berok' + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag_GCJ="-z nodefs" + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag_GCJ=' ${wl}-bernotok' + allow_undefined_flag_GCJ=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec_GCJ='$convenience' + archive_cmds_need_lc_GCJ=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + # see comment about different semantics on the GNU ld section + ld_shlibs_GCJ=no + ;; + + bsdi[45]*) + export_dynamic_flag_spec_GCJ=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec_GCJ=' ' + allow_undefined_flag_GCJ=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_From_new_cmds_GCJ='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes_GCJ=yes + ;; + + darwin* | rhapsody*) + case $host_os in + rhapsody* | darwin1.[012]) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' + ;; + *) # Darwin 1.3 on + if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + else + case ${MACOSX_DEPLOYMENT_TARGET} in + 10.[012]) + allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' + ;; + 10.*) + allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' + ;; + esac + fi + ;; + esac + archive_cmds_need_lc_GCJ=no + hardcode_direct_GCJ=no + hardcode_automatic_GCJ=yes + hardcode_shlibpath_var_GCJ=unsupported + whole_archive_flag_spec_GCJ='' + link_all_deplibs_GCJ=yes + if test "$GCC" = yes ; then + output_verbose_link_cmd='echo' + archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + else + case $cc_basename in + xlc*) + output_verbose_link_cmd='echo' + archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' + module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' + # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds + archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + ;; + *) + ld_shlibs_GCJ=no + ;; + esac + fi + ;; + + dgux*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_shlibpath_var_GCJ=no + ;; + + freebsd1*) + ld_shlibs_GCJ=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_direct_GCJ=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + + hardcode_direct_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' + hardcode_direct_GCJ=no + hardcode_shlibpath_var_GCJ=no + ;; + *) + hardcode_direct_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L_GCJ=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' + fi + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + link_all_deplibs_GCJ=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + newsos6) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + hardcode_shlibpath_var_GCJ=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct_GCJ=yes + hardcode_shlibpath_var_GCJ=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + export_dynamic_flag_spec_GCJ='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-R$libdir' + ;; + *) + archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs_GCJ=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_minus_L_GCJ=yes + allow_undefined_flag_GCJ=unsupported + archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag_GCJ=' -expect_unresolved \*' + archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator_GCJ=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag_GCJ=' -expect_unresolved \*' + archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec_GCJ='-rpath $libdir' + fi + hardcode_libdir_separator_GCJ=: + ;; + + solaris*) + no_undefined_flag_GCJ=' -z text' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + wlarc='' + archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + hardcode_libdir_flag_spec_GCJ='-R$libdir' + hardcode_shlibpath_var_GCJ=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs_GCJ=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_direct_GCJ=yes + hardcode_minus_L_GCJ=yes + hardcode_shlibpath_var_GCJ=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds_GCJ='$CC -r -o $output$reload_objs' + hardcode_direct_GCJ=no + ;; + motorola) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var_GCJ=no + ;; + + sysv4.3*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + export_dynamic_flag_spec_GCJ='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var_GCJ=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs_GCJ=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag_GCJ='${wl}-z,text' + archive_cmds_need_lc_GCJ=no + hardcode_shlibpath_var_GCJ=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag_GCJ='${wl}-z,text' + allow_undefined_flag_GCJ='${wl}-z,nodefs' + archive_cmds_need_lc_GCJ=no + hardcode_shlibpath_var_GCJ=no + hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' + hardcode_libdir_separator_GCJ=':' + link_all_deplibs_GCJ=yes + export_dynamic_flag_spec_GCJ='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec_GCJ='-L$libdir' + hardcode_shlibpath_var_GCJ=no + ;; + + *) + ld_shlibs_GCJ=no + ;; + esac + fi + +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 +$as_echo "$ld_shlibs_GCJ" >&6; } +test "$ld_shlibs_GCJ" = no && can_build_shared=no + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc_GCJ" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc_GCJ=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds_GCJ in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $rm conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl_GCJ + pic_flag=$lt_prog_compiler_pic_GCJ + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ + allow_undefined_flag_GCJ= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc_GCJ=no + else + archive_cmds_need_lc_GCJ=yes + fi + allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 +$as_echo "$archive_cmds_need_lc_GCJ" >&6; } + ;; + esac + fi + ;; +esac + +{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" + +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + export_dynamic_flag_spec='${wl}-Blargedynsym' + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + shlibpath_overrides_runpath=no + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + shlibpath_overrides_runpath=yes + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec" +fi + +sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec" +fi + +sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action_GCJ= +if test -n "$hardcode_libdir_flag_spec_GCJ" || \ + test -n "$runpath_var_GCJ" || \ + test "X$hardcode_automatic_GCJ" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$hardcode_direct_GCJ" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && + test "$hardcode_minus_L_GCJ" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action_GCJ=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action_GCJ=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action_GCJ=unsupported +fi +{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 +$as_echo "$hardcode_action_GCJ" >&6; } + +if test "$hardcode_action_GCJ" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_GCJ \ + CC_GCJ \ + LD_GCJ \ + lt_prog_compiler_wl_GCJ \ + lt_prog_compiler_pic_GCJ \ + lt_prog_compiler_static_GCJ \ + lt_prog_compiler_no_builtin_flag_GCJ \ + export_dynamic_flag_spec_GCJ \ + thread_safe_flag_spec_GCJ \ + whole_archive_flag_spec_GCJ \ + enable_shared_with_static_runtimes_GCJ \ + old_archive_cmds_GCJ \ + old_archive_from_new_cmds_GCJ \ + predep_objects_GCJ \ + postdep_objects_GCJ \ + predeps_GCJ \ + postdeps_GCJ \ + compiler_lib_search_path_GCJ \ + compiler_lib_search_dirs_GCJ \ + archive_cmds_GCJ \ + archive_expsym_cmds_GCJ \ + postinstall_cmds_GCJ \ + postuninstall_cmds_GCJ \ + old_archive_from_expsyms_cmds_GCJ \ + allow_undefined_flag_GCJ \ + no_undefined_flag_GCJ \ + export_symbols_cmds_GCJ \ + hardcode_libdir_flag_spec_GCJ \ + hardcode_libdir_flag_spec_ld_GCJ \ + hardcode_libdir_separator_GCJ \ + hardcode_automatic_GCJ \ + module_cmds_GCJ \ + module_expsym_cmds_GCJ \ + lt_cv_prog_compiler_c_o_GCJ \ + fix_srcfile_path_GCJ \ + exclude_expsyms_GCJ \ + include_expsyms_GCJ; do + + case $var in + old_archive_cmds_GCJ | \ + old_archive_from_new_cmds_GCJ | \ + archive_cmds_GCJ | \ + archive_expsym_cmds_GCJ | \ + module_cmds_GCJ | \ + module_expsym_cmds_GCJ | \ + old_archive_from_expsyms_cmds_GCJ | \ + export_symbols_cmds_GCJ | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_GCJ + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler_GCJ + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_GCJ + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_GCJ + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_GCJ + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_GCJ +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_GCJ + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_GCJ +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_GCJ +archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_GCJ +module_expsym_cmds=$lt_module_expsym_cmds_GCJ + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_GCJ + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_GCJ + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_GCJ + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_GCJ + +# The directories searched by this compiler when creating a shared +# library +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_GCJ + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_GCJ + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_GCJ + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_GCJ + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_GCJ + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_GCJ + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_GCJ + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_GCJ + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_GCJ + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_GCJ + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_GCJ + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + else + tagname="" + fi + ;; + + RC) + + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +objext_RC=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$rm conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$rm -r conftest* + + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${RC-"windres"} +compiler=$CC +compiler_RC=$CC +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +lt_cv_prog_compiler_c_o_RC=yes + +# The else clause should only fire when bootstrapping the +# libtool distribution, otherwise you forgot to ship ltmain.sh +# with your package, and you will get complaints that there are +# no rules to generate ltmain.sh. +if test -f "$ltmain"; then + # See if we are running on zsh, and set the options which allow our commands through + # without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. + for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ + deplibs_check_method reload_flag reload_cmds need_locks \ + lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ + lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ + old_postinstall_cmds old_postuninstall_cmds \ + compiler_RC \ + CC_RC \ + LD_RC \ + lt_prog_compiler_wl_RC \ + lt_prog_compiler_pic_RC \ + lt_prog_compiler_static_RC \ + lt_prog_compiler_no_builtin_flag_RC \ + export_dynamic_flag_spec_RC \ + thread_safe_flag_spec_RC \ + whole_archive_flag_spec_RC \ + enable_shared_with_static_runtimes_RC \ + old_archive_cmds_RC \ + old_archive_from_new_cmds_RC \ + predep_objects_RC \ + postdep_objects_RC \ + predeps_RC \ + postdeps_RC \ + compiler_lib_search_path_RC \ + compiler_lib_search_dirs_RC \ + archive_cmds_RC \ + archive_expsym_cmds_RC \ + postinstall_cmds_RC \ + postuninstall_cmds_RC \ + old_archive_from_expsyms_cmds_RC \ + allow_undefined_flag_RC \ + no_undefined_flag_RC \ + export_symbols_cmds_RC \ + hardcode_libdir_flag_spec_RC \ + hardcode_libdir_flag_spec_ld_RC \ + hardcode_libdir_separator_RC \ + hardcode_automatic_RC \ + module_cmds_RC \ + module_expsym_cmds_RC \ + lt_cv_prog_compiler_c_o_RC \ + fix_srcfile_path_RC \ + exclude_expsyms_RC \ + include_expsyms_RC; do + + case $var in + old_archive_cmds_RC | \ + old_archive_from_new_cmds_RC | \ + archive_cmds_RC | \ + archive_expsym_cmds_RC | \ + module_cmds_RC | \ + module_expsym_cmds_RC | \ + old_archive_from_expsyms_cmds_RC | \ + export_symbols_cmds_RC | \ + extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ + old_postinstall_cmds | old_postuninstall_cmds | \ + sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; + *) + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" + ;; + esac + done + + case $lt_echo in + *'\$0 --fallback-echo"') + lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` + ;; + esac + +cfgfile="$ofile" + + cat <<__EOF__ >> "$cfgfile" +# ### BEGIN LIBTOOL TAG CONFIG: $tagname + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc_RC + +# Whether or not to disallow shared libs when runtime libs are static +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$lt_LTCC + +# LTCC compiler flags. +LTCFLAGS=$lt_LTCFLAGS + +# A language-specific compiler. +CC=$lt_compiler_RC + +# Is the compiler the GNU C compiler? +with_gcc=$GCC_RC + +# An ERE matcher. +EGREP=$lt_EGREP + +# The linker used to build libraries. +LD=$lt_LD_RC + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$lt_STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl_RC + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Shared library suffix (normally ".so"). +shrext_cmds='$shrext_cmds' + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic_RC +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static_RC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_old_archive_cmds_RC +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC + +# Commands used to build and install a shared archive. +archive_cmds=$lt_archive_cmds_RC +archive_expsym_cmds=$lt_archive_expsym_cmds_RC +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to build a loadable module (assumed same as above if empty) +module_cmds=$lt_module_cmds_RC +module_expsym_cmds=$lt_module_expsym_cmds_RC + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_predep_objects_RC + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_postdep_objects_RC + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_predeps_RC + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_postdeps_RC + +# The directories searched by this compiler when creating a shared +# library +compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_compiler_lib_search_path_RC + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag_RC + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag_RC + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action_RC + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC + +# If ld is used when linking, flag to hardcode \$libdir into +# a binary during linking. This must work even if \$libdir does +# not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC + +# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$hardcode_direct_RC + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$hardcode_minus_L_RC + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var_RC + +# Set to yes if building a shared library automatically hardcodes DIR into the library +# and all subsequent libraries and executables linked against it. +hardcode_automatic=$hardcode_automatic_RC + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs_RC + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to yes if exported symbols are required. +always_export_symbols=$always_export_symbols_RC + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds_RC + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms_RC + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms_RC + +# ### END LIBTOOL TAG CONFIG: $tagname + +__EOF__ + + +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` + if test -f "$ltmain_in"; then + test -f Makefile && make "$ltmain" + fi +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + ;; + + *) + { { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 +$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;} + { (exit 1); exit 1; }; } + ;; + esac + + # Append the new tag name to the list of available tags. + if test -n "$tagname" ; then + available_tags="$available_tags $tagname" + fi + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 +$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;} + { (exit 1); exit 1; }; } + fi +fi + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +# Prevent multiple expansion + + + + + + + + + + + + + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + + +for ac_header in sys/mman.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5 +$as_echo_n "checking $ac_header usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5 +$as_echo_n "checking $ac_header presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <$ac_header> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ------------------------------------------- ## +## Report this to http://gcc.gnu.org/bugs.html ## +## ------------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + eval "$as_ac_Header=\$ac_header_preproc" +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } + +fi +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + +for ac_func in mmap +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$as_ac_var=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + + +if test "${ac_cv_header_sys_mman_h+set}" = set; then + { $as_echo "$as_me:$LINENO: checking for sys/mman.h" >&5 +$as_echo_n "checking for sys/mman.h... " >&6; } +if test "${ac_cv_header_sys_mman_h+set}" = set; then + $as_echo_n "(cached) " >&6 +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_mman_h" >&5 +$as_echo "$ac_cv_header_sys_mman_h" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:$LINENO: checking sys/mman.h usability" >&5 +$as_echo_n "checking sys/mman.h usability... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +#include +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_header_compiler=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_compiler=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:$LINENO: checking sys/mman.h presence" >&5 +$as_echo_n "checking sys/mman.h presence... " >&6; } +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + ac_header_preproc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_header_preproc=no +fi + +rm -f conftest.err conftest.$ac_ext +{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in + yes:no: ) + { $as_echo "$as_me:$LINENO: WARNING: sys/mman.h: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: sys/mman.h: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: sys/mman.h: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: sys/mman.h: proceeding with the compiler's result" >&2;} + ac_header_preproc=yes + ;; + no:yes:* ) + { $as_echo "$as_me:$LINENO: WARNING: sys/mman.h: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: sys/mman.h: present but cannot be compiled" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: sys/mman.h: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: sys/mman.h: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: sys/mman.h: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: sys/mman.h: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: sys/mman.h: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: sys/mman.h: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: sys/mman.h: proceeding with the preprocessor's result" >&5 +$as_echo "$as_me: WARNING: sys/mman.h: proceeding with the preprocessor's result" >&2;} + { $as_echo "$as_me:$LINENO: WARNING: sys/mman.h: in the future, the compiler will take precedence" >&5 +$as_echo "$as_me: WARNING: sys/mman.h: in the future, the compiler will take precedence" >&2;} + ( cat <<\_ASBOX +## ------------------------------------------- ## +## Report this to http://gcc.gnu.org/bugs.html ## +## ------------------------------------------- ## +_ASBOX + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac +{ $as_echo "$as_me:$LINENO: checking for sys/mman.h" >&5 +$as_echo_n "checking for sys/mman.h... " >&6; } +if test "${ac_cv_header_sys_mman_h+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_header_sys_mman_h=$ac_header_preproc +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_sys_mman_h" >&5 +$as_echo "$ac_cv_header_sys_mman_h" >&6; } + +fi +if test "x$ac_cv_header_sys_mman_h" = x""yes; then + libffi_header_sys_mman_h=yes +else + libffi_header_sys_mman_h=no +fi + + +{ $as_echo "$as_me:$LINENO: checking for mmap" >&5 +$as_echo_n "checking for mmap... " >&6; } +if test "${ac_cv_func_mmap+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define mmap to an innocuous variant, in case declares mmap. + For example, HP-UX 11i declares gettimeofday. */ +#define mmap innocuous_mmap + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char mmap (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef mmap + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char mmap (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_mmap || defined __stub___mmap +choke me +#endif + +int +main () +{ +return mmap (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_mmap=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_mmap=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_mmap" >&5 +$as_echo "$ac_cv_func_mmap" >&6; } +if test "x$ac_cv_func_mmap" = x""yes; then + libffi_func_mmap=yes +else + libffi_func_mmap=no +fi + +if test "$libffi_header_sys_mman_h" != yes \ + || test "$libffi_func_mmap" != yes; then + ac_cv_func_mmap_file=no + ac_cv_func_mmap_dev_zero=no + ac_cv_func_mmap_anon=no +else + { $as_echo "$as_me:$LINENO: checking whether read-only mmap of a plain file works" >&5 +$as_echo_n "checking whether read-only mmap of a plain file works... " >&6; } +if test "${ac_cv_func_mmap_file+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # Add a system to this blacklist if + # mmap(0, stat_size, PROT_READ, MAP_PRIVATE, fd, 0) doesn't return a + # memory area containing the same data that you'd get if you applied + # read() to the same fd. The only system known to have a problem here + # is VMS, where text files have record structure. + case "$host_os" in + vms* | ultrix*) + ac_cv_func_mmap_file=no ;; + *) + ac_cv_func_mmap_file=yes;; + esac +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_mmap_file" >&5 +$as_echo "$ac_cv_func_mmap_file" >&6; } + { $as_echo "$as_me:$LINENO: checking whether mmap from /dev/zero works" >&5 +$as_echo_n "checking whether mmap from /dev/zero works... " >&6; } +if test "${ac_cv_func_mmap_dev_zero+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # Add a system to this blacklist if it has mmap() but /dev/zero + # does not exist, or if mmapping /dev/zero does not give anonymous + # zeroed pages with both the following properties: + # 1. If you map N consecutive pages in with one call, and then + # unmap any subset of those pages, the pages that were not + # explicitly unmapped remain accessible. + # 2. If you map two adjacent blocks of memory and then unmap them + # both at once, they must both go away. + # Systems known to be in this category are Windows (all variants), + # VMS, and Darwin. + case "$host_os" in + vms* | cygwin* | pe | mingw* | darwin* | ultrix* | hpux10* | hpux11.00) + ac_cv_func_mmap_dev_zero=no ;; + *) + ac_cv_func_mmap_dev_zero=yes;; + esac +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_mmap_dev_zero" >&5 +$as_echo "$ac_cv_func_mmap_dev_zero" >&6; } + + # Unlike /dev/zero, the MAP_ANON(YMOUS) defines can be probed for. + { $as_echo "$as_me:$LINENO: checking for MAP_ANON(YMOUS)" >&5 +$as_echo_n "checking for MAP_ANON(YMOUS)... " >&6; } +if test "${ac_cv_decl_map_anon+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include + +#ifndef MAP_ANONYMOUS +#define MAP_ANONYMOUS MAP_ANON +#endif + +int +main () +{ +int n = MAP_ANONYMOUS; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_decl_map_anon=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_decl_map_anon=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_decl_map_anon" >&5 +$as_echo "$ac_cv_decl_map_anon" >&6; } + + if test $ac_cv_decl_map_anon = no; then + ac_cv_func_mmap_anon=no + else + { $as_echo "$as_me:$LINENO: checking whether mmap with MAP_ANON(YMOUS) works" >&5 +$as_echo_n "checking whether mmap with MAP_ANON(YMOUS) works... " >&6; } +if test "${ac_cv_func_mmap_anon+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # Add a system to this blacklist if it has mmap() and MAP_ANON or + # MAP_ANONYMOUS, but using mmap(..., MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) + # doesn't give anonymous zeroed pages with the same properties listed + # above for use of /dev/zero. + # Systems known to be in this category are Windows, VMS, and SCO Unix. + case "$host_os" in + vms* | cygwin* | pe | mingw* | sco* | udk* ) + ac_cv_func_mmap_anon=no ;; + *) + ac_cv_func_mmap_anon=yes;; + esac +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_mmap_anon" >&5 +$as_echo "$ac_cv_func_mmap_anon" >&6; } + fi +fi + +if test $ac_cv_func_mmap_file = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_MMAP_FILE 1 +_ACEOF + +fi +if test $ac_cv_func_mmap_dev_zero = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_MMAP_DEV_ZERO 1 +_ACEOF + +fi +if test $ac_cv_func_mmap_anon = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_MMAP_ANON 1 +_ACEOF + +fi + + + if test -d $srcdir/testsuite; then + TESTSUBDIR_TRUE= + TESTSUBDIR_FALSE='#' +else + TESTSUBDIR_TRUE='#' + TESTSUBDIR_FALSE= +fi + + +TARGETDIR="unknown" +case "$host" in + alpha*-*-*) + TARGET=ALPHA; TARGETDIR=alpha; + # Support 128-bit long double, changable via command-line switch. + HAVE_LONG_DOUBLE='defined(__LONG_DOUBLE_128__)' + ;; + + arm*-*-*) + TARGET=ARM; TARGETDIR=arm + ;; + + amd64-*-freebsd*) + TARGET=X86_64; TARGETDIR=x86 + ;; + + cris-*-*) + TARGET=LIBFFI_CRIS; TARGETDIR=cris + ;; + + frv-*-*) + TARGET=FRV; TARGETDIR=frv + ;; + + hppa*-*-linux* | parisc*-*-linux*) + TARGET=PA_LINUX; TARGETDIR=pa + ;; + hppa*64-*-hpux*) + TARGET=PA64_HPUX; TARGETDIR=pa + ;; + hppa*-*-hpux*) + TARGET=PA_HPUX; TARGETDIR=pa + ;; + + i386-*-freebsd* | i386-*-openbsd*) + TARGET=X86_FREEBSD; TARGETDIR=x86 + ;; + i?86-win32* | i?86-*-cygwin* | i?86-*-mingw*) + TARGET=X86_WIN32; TARGETDIR=x86 + ;; + i?86-*-darwin*) + TARGET=X86_DARWIN; TARGETDIR=x86 + ;; + i?86-*-solaris2.1[0-9]*) + TARGET=X86_64; TARGETDIR=x86 + ;; + i?86-*-*) + TARGET=X86; TARGETDIR=x86 + ;; + + ia64*-*-*) + TARGET=IA64; TARGETDIR=ia64 + ;; + + m32r*-*-*) + TARGET=M32R; TARGETDIR=m32r + ;; + + m68k-*-*) + TARGET=M68K; TARGETDIR=m68k + ;; + + mips-sgi-irix5.* | mips-sgi-irix6.*) + TARGET=MIPS; TARGETDIR=mips + ;; + mips*-*-linux*) + TARGET=MIPS; TARGETDIR=mips + ;; + + powerpc*-*-linux* | powerpc-*-sysv*) + TARGET=POWERPC; TARGETDIR=powerpc + ;; + powerpc-*-beos*) + TARGET=POWERPC; TARGETDIR=powerpc + ;; + powerpc-*-darwin*) + TARGET=POWERPC_DARWIN; TARGETDIR=powerpc + ;; + powerpc-*-aix* | rs6000-*-aix*) + TARGET=POWERPC_AIX; TARGETDIR=powerpc + ;; + powerpc-*-freebsd*) + TARGET=POWERPC_FREEBSD; TARGETDIR=powerpc + ;; + powerpc*-*-rtems*) + TARGET=POWERPC; TARGETDIR=powerpc + ;; + + s390-*-* | s390x-*-*) + TARGET=S390; TARGETDIR=s390 + ;; + + sh-*-* | sh[34]*-*-*) + TARGET=SH; TARGETDIR=sh + ;; + sh64-*-* | sh5*-*-*) + TARGET=SH64; TARGETDIR=sh64 + ;; + + sparc*-*-*) + TARGET=SPARC; TARGETDIR=sparc + ;; + + x86_64-*-darwin*) + TARGET=X86_DARWIN; TARGETDIR=x86 + ;; + x86_64-*-cygwin* | x86_64-*-mingw*) + ;; + x86_64-*-*) + TARGET=X86_64; TARGETDIR=x86 + ;; +esac + + + +if test $TARGETDIR = unknown; then + { { $as_echo "$as_me:$LINENO: error: \"libffi has not been ported to $host.\"" >&5 +$as_echo "$as_me: error: \"libffi has not been ported to $host.\"" >&2;} + { (exit 1); exit 1; }; } +fi + + if test x$TARGET = xMIPS; then + MIPS_TRUE= + MIPS_FALSE='#' +else + MIPS_TRUE='#' + MIPS_FALSE= +fi + + if test x$TARGET = xSPARC; then + SPARC_TRUE= + SPARC_FALSE='#' +else + SPARC_TRUE='#' + SPARC_FALSE= +fi + + if test x$TARGET = xX86; then + X86_TRUE= + X86_FALSE='#' +else + X86_TRUE='#' + X86_FALSE= +fi + + if test x$TARGET = xX86_FREEBSD; then + X86_FREEBSD_TRUE= + X86_FREEBSD_FALSE='#' +else + X86_FREEBSD_TRUE='#' + X86_FREEBSD_FALSE= +fi + + if test x$TARGET = xX86_WIN32; then + X86_WIN32_TRUE= + X86_WIN32_FALSE='#' +else + X86_WIN32_TRUE='#' + X86_WIN32_FALSE= +fi + + if test x$TARGET = xX86_DARWIN; then + X86_DARWIN_TRUE= + X86_DARWIN_FALSE='#' +else + X86_DARWIN_TRUE='#' + X86_DARWIN_FALSE= +fi + + if test x$TARGET = xALPHA; then + ALPHA_TRUE= + ALPHA_FALSE='#' +else + ALPHA_TRUE='#' + ALPHA_FALSE= +fi + + if test x$TARGET = xIA64; then + IA64_TRUE= + IA64_FALSE='#' +else + IA64_TRUE='#' + IA64_FALSE= +fi + + if test x$TARGET = xM32R; then + M32R_TRUE= + M32R_FALSE='#' +else + M32R_TRUE='#' + M32R_FALSE= +fi + + if test x$TARGET = xM68K; then + M68K_TRUE= + M68K_FALSE='#' +else + M68K_TRUE='#' + M68K_FALSE= +fi + + if test x$TARGET = xPOWERPC; then + POWERPC_TRUE= + POWERPC_FALSE='#' +else + POWERPC_TRUE='#' + POWERPC_FALSE= +fi + + if test x$TARGET = xPOWERPC_AIX; then + POWERPC_AIX_TRUE= + POWERPC_AIX_FALSE='#' +else + POWERPC_AIX_TRUE='#' + POWERPC_AIX_FALSE= +fi + + if test x$TARGET = xPOWERPC_DARWIN; then + POWERPC_DARWIN_TRUE= + POWERPC_DARWIN_FALSE='#' +else + POWERPC_DARWIN_TRUE='#' + POWERPC_DARWIN_FALSE= +fi + + if test x$TARGET = xPOWERPC_FREEBSD; then + POWERPC_FREEBSD_TRUE= + POWERPC_FREEBSD_FALSE='#' +else + POWERPC_FREEBSD_TRUE='#' + POWERPC_FREEBSD_FALSE= +fi + + if test x$TARGET = xARM; then + ARM_TRUE= + ARM_FALSE='#' +else + ARM_TRUE='#' + ARM_FALSE= +fi + + if test x$TARGET = xLIBFFI_CRIS; then + LIBFFI_CRIS_TRUE= + LIBFFI_CRIS_FALSE='#' +else + LIBFFI_CRIS_TRUE='#' + LIBFFI_CRIS_FALSE= +fi + + if test x$TARGET = xFRV; then + FRV_TRUE= + FRV_FALSE='#' +else + FRV_TRUE='#' + FRV_FALSE= +fi + + if test x$TARGET = xS390; then + S390_TRUE= + S390_FALSE='#' +else + S390_TRUE='#' + S390_FALSE= +fi + + if test x$TARGET = xX86_64; then + X86_64_TRUE= + X86_64_FALSE='#' +else + X86_64_TRUE='#' + X86_64_FALSE= +fi + + if test x$TARGET = xSH; then + SH_TRUE= + SH_FALSE='#' +else + SH_TRUE='#' + SH_FALSE= +fi + + if test x$TARGET = xSH64; then + SH64_TRUE= + SH64_FALSE='#' +else + SH64_TRUE='#' + SH64_FALSE= +fi + + if test x$TARGET = xPA_LINUX; then + PA_LINUX_TRUE= + PA_LINUX_FALSE='#' +else + PA_LINUX_TRUE='#' + PA_LINUX_FALSE= +fi + + if test x$TARGET = xPA_HPUX; then + PA_HPUX_TRUE= + PA_HPUX_FALSE='#' +else + PA_HPUX_TRUE='#' + PA_HPUX_FALSE= +fi + + if test x$TARGET = xPA64_HPUX; then + PA64_HPUX_TRUE= + PA64_HPUX_FALSE='#' +else + PA64_HPUX_TRUE='#' + PA64_HPUX_FALSE= +fi + + +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#include +#include + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + + +for ac_func in memcpy +do +as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$as_ac_var=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 +_ACEOF + +fi +done + +# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works +# for constant arguments. Useless! +{ $as_echo "$as_me:$LINENO: checking for working alloca.h" >&5 +$as_echo_n "checking for working alloca.h... " >&6; } +if test "${ac_cv_working_alloca_h+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +int +main () +{ +char *p = (char *) alloca (2 * sizeof (int)); + if (p) return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_working_alloca_h=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_working_alloca_h=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5 +$as_echo "$ac_cv_working_alloca_h" >&6; } +if test $ac_cv_working_alloca_h = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_ALLOCA_H 1 +_ACEOF + +fi + +{ $as_echo "$as_me:$LINENO: checking for alloca" >&5 +$as_echo_n "checking for alloca... " >&6; } +if test "${ac_cv_func_alloca_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __GNUC__ +# define alloca __builtin_alloca +#else +# ifdef _MSC_VER +# include +# define alloca _alloca +# else +# ifdef HAVE_ALLOCA_H +# include +# else +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ +char *alloca (); +# endif +# endif +# endif +# endif +#endif + +int +main () +{ +char *p = (char *) alloca (1); + if (p) return 0; + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_alloca_works=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_alloca_works=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5 +$as_echo "$ac_cv_func_alloca_works" >&6; } + +if test $ac_cv_func_alloca_works = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_ALLOCA 1 +_ACEOF + +else + # The SVR3 libPW and SVR4 libucb both contain incompatible functions +# that cause trouble. Some versions do not even contain alloca or +# contain a buggy version. If you still want to use their alloca, +# use ar to extract alloca.o from them instead of compiling alloca.c. + +ALLOCA=\${LIBOBJDIR}alloca.$ac_objext + +cat >>confdefs.h <<\_ACEOF +#define C_ALLOCA 1 +_ACEOF + + +{ $as_echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5 +$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; } +if test "${ac_cv_os_cray+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#if defined CRAY && ! defined CRAY2 +webecray +#else +wenotbecray +#endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "webecray" >/dev/null 2>&1; then + ac_cv_os_cray=yes +else + ac_cv_os_cray=no +fi +rm -f conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5 +$as_echo "$ac_cv_os_cray" >&6; } +if test $ac_cv_os_cray = yes; then + for ac_func in _getb67 GETB67 getb67; do + as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5 +$as_echo_n "checking for $ac_func... " >&6; } +if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define $ac_func to an innocuous variant, in case declares $ac_func. + For example, HP-UX 11i declares gettimeofday. */ +#define $ac_func innocuous_$ac_func + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char $ac_func (); below. + Prefer to if __STDC__ is defined, since + exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include +#else +# include +#endif + +#undef $ac_func + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char $ac_func (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_$ac_func || defined __stub___$ac_func +choke me +#endif + +int +main () +{ +return $ac_func (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + eval "$as_ac_var=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_var=no" +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_var'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + +cat >>confdefs.h <<_ACEOF +#define CRAY_STACKSEG_END $ac_func +_ACEOF + + break +fi + + done +fi + +{ $as_echo "$as_me:$LINENO: checking stack direction for C alloca" >&5 +$as_echo_n "checking stack direction for C alloca... " >&6; } +if test "${ac_cv_c_stack_direction+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_stack_direction=0 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +find_stack_direction () +{ + static char *addr = 0; + auto char dummy; + if (addr == 0) + { + addr = &dummy; + return find_stack_direction (); + } + else + return (&dummy > addr) ? 1 : -1; +} + +int +main () +{ + return find_stack_direction () < 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_stack_direction=1 +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_c_stack_direction=-1 +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5 +$as_echo "$ac_cv_c_stack_direction" >&6; } + +cat >>confdefs.h <<_ACEOF +#define STACK_DIRECTION $ac_cv_c_stack_direction +_ACEOF + + +fi + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:$LINENO: checking size of double" >&5 +$as_echo_n "checking size of double... " >&6; } +if test "${ac_cv_sizeof_double+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (double))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (double))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_hi=$ac_mid; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (double))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (double))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_lo=$ac_mid; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_lo= ac_hi= +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (double))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_hi=$ac_mid +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_lo=`expr '(' $ac_mid ')' + 1` +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_double=$ac_lo;; +'') if test "$ac_cv_type_double" = yes; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (double) +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute sizeof (double) +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } + else + ac_cv_sizeof_double=0 + fi ;; +esac +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +static long int longval () { return (long int) (sizeof (double)); } +static unsigned long int ulongval () { return (long int) (sizeof (double)); } +#include +#include +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + return 1; + if (((long int) (sizeof (double))) < 0) + { + long int i = longval (); + if (i != ((long int) (sizeof (double)))) + return 1; + fprintf (f, "%ld", i); + } + else + { + unsigned long int i = ulongval (); + if (i != ((long int) (sizeof (double)))) + return 1; + fprintf (f, "%lu", i); + } + /* Do not output a trailing newline, as this causes \r\n confusion + on some platforms. */ + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_double=`cat conftest.val` +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +if test "$ac_cv_type_double" = yes; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (double) +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute sizeof (double) +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } + else + ac_cv_sizeof_double=0 + fi +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.val +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_double" >&5 +$as_echo "$ac_cv_sizeof_double" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_DOUBLE $ac_cv_sizeof_double +_ACEOF + + +# The cast to long int works around a bug in the HP C Compiler +# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects +# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'. +# This bug is HP SR number 8606223364. +{ $as_echo "$as_me:$LINENO: checking size of long double" >&5 +$as_echo_n "checking size of long double... " >&6; } +if test "${ac_cv_sizeof_long_double+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then + # Depending upon the size, compute the lo and hi bounds. +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (long double))) >= 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_lo=0 ac_mid=0 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (long double))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_hi=$ac_mid; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_lo=`expr $ac_mid + 1` + if test $ac_lo -le $ac_mid; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid + 1` +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (long double))) < 0)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_hi=-1 ac_mid=-1 + while :; do + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (long double))) >= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_lo=$ac_mid; break +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_hi=`expr '(' $ac_mid ')' - 1` + if test $ac_mid -le $ac_hi; then + ac_lo= ac_hi= + break + fi + ac_mid=`expr 2 '*' $ac_mid` +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_lo= ac_hi= +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +# Binary search between lo and hi bounds. +while test "x$ac_lo" != "x$ac_hi"; do + ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ +static int test_array [1 - 2 * !(((long int) (sizeof (long double))) <= $ac_mid)]; +test_array [0] = 0 + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_hi=$ac_mid +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_lo=`expr '(' $ac_mid ')' + 1` +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +done +case $ac_lo in +?*) ac_cv_sizeof_long_double=$ac_lo;; +'') if test "$ac_cv_type_long_double" = yes; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (long double) +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute sizeof (long double) +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } + else + ac_cv_sizeof_long_double=0 + fi ;; +esac +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +static long int longval () { return (long int) (sizeof (long double)); } +static unsigned long int ulongval () { return (long int) (sizeof (long double)); } +#include +#include +int +main () +{ + + FILE *f = fopen ("conftest.val", "w"); + if (! f) + return 1; + if (((long int) (sizeof (long double))) < 0) + { + long int i = longval (); + if (i != ((long int) (sizeof (long double)))) + return 1; + fprintf (f, "%ld", i); + } + else + { + unsigned long int i = ulongval (); + if (i != ((long int) (sizeof (long double)))) + return 1; + fprintf (f, "%lu", i); + } + /* Do not output a trailing newline, as this causes \r\n confusion + on some platforms. */ + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_sizeof_long_double=`cat conftest.val` +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +if test "$ac_cv_type_long_double" = yes; then + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute sizeof (long double) +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute sizeof (long double) +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } + else + ac_cv_sizeof_long_double=0 + fi +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi +rm -f conftest.val +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_sizeof_long_double" >&5 +$as_echo "$ac_cv_sizeof_long_double" >&6; } + + + +cat >>confdefs.h <<_ACEOF +#define SIZEOF_LONG_DOUBLE $ac_cv_sizeof_long_double +_ACEOF + + + +# Also AC_SUBST this variable for ffi.h. +if test -z "$HAVE_LONG_DOUBLE"; then + HAVE_LONG_DOUBLE=0 + if test $ac_cv_sizeof_double != $ac_cv_sizeof_long_double; then + if test $ac_cv_sizeof_long_double != 0; then + HAVE_LONG_DOUBLE=1 + +cat >>confdefs.h <<\_ACEOF +#define HAVE_LONG_DOUBLE 1 +_ACEOF + + fi + fi +fi + + + + { $as_echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5 +$as_echo_n "checking whether byte ordering is bigendian... " >&6; } +if test "${ac_cv_c_bigendian+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_c_bigendian=unknown + # See if we're dealing with a universal compiler. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifndef __APPLE_CC__ + not a universal capable compiler + #endif + typedef int dummy; + +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + + # Check for potential -arch flags. It is not universal unless + # there are some -arch flags. Note that *ppc* also matches + # ppc64. This check is also rather less than ideal. + case "${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS}" in #( + *-arch*ppc*|*-arch*i386*|*-arch*x86_64*) ac_cv_c_bigendian=universal;; + esac +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + if test $ac_cv_c_bigendian = unknown; then + # See if sys/param.h defines the BYTE_ORDER macro. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + #include + +int +main () +{ +#if ! (defined BYTE_ORDER && defined BIG_ENDIAN \ + && defined LITTLE_ENDIAN && BYTE_ORDER && BIG_ENDIAN \ + && LITTLE_ENDIAN) + bogus endian macros + #endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + # It does; now see whether it defined to BIG_ENDIAN or not. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + #include + +int +main () +{ +#if BYTE_ORDER != BIG_ENDIAN + not big endian + #endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_c_bigendian=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_c_bigendian=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # See if defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris). + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +int +main () +{ +#if ! (defined _LITTLE_ENDIAN || defined _BIG_ENDIAN) + bogus endian macros + #endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + # It does; now see whether it defined to _BIG_ENDIAN or not. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include + +int +main () +{ +#ifndef _BIG_ENDIAN + not big endian + #endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_c_bigendian=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_c_bigendian=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi + if test $ac_cv_c_bigendian = unknown; then + # Compile a test program. + if test "$cross_compiling" = yes; then + # Try to guess by grepping values from an object file. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +short int ascii_mm[] = + { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 }; + short int ascii_ii[] = + { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 }; + int use_ascii (int i) { + return ascii_mm[i] + ascii_ii[i]; + } + short int ebcdic_ii[] = + { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 }; + short int ebcdic_mm[] = + { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 }; + int use_ebcdic (int i) { + return ebcdic_mm[i] + ebcdic_ii[i]; + } + extern int foo; + +int +main () +{ +return use_ascii (foo) == use_ebcdic (foo); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then + ac_cv_c_bigendian=yes + fi + if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then + if test "$ac_cv_c_bigendian" = unknown; then + ac_cv_c_bigendian=no + else + # finding both strings is unlikely to happen, but who knows? + ac_cv_c_bigendian=unknown + fi + fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default +int +main () +{ + + /* Are we little or big endian? From Harbison&Steele. */ + union + { + long int l; + char c[sizeof (long int)]; + } u; + u.l = 1; + return u.c[sizeof (long int) - 1] == 1; + + ; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + ac_cv_c_bigendian=no +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_c_bigendian=yes +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + + fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5 +$as_echo "$ac_cv_c_bigendian" >&6; } + case $ac_cv_c_bigendian in #( + yes) + cat >>confdefs.h <<\_ACEOF +#define WORDS_BIGENDIAN 1 +_ACEOF +;; #( + no) + ;; #( + universal) + +cat >>confdefs.h <<\_ACEOF +#define AC_APPLE_UNIVERSAL_BUILD 1 +_ACEOF + + ;; #( + *) + { { $as_echo "$as_me:$LINENO: error: unknown endianness + presetting ac_cv_c_bigendian=no (or yes) will help" >&5 +$as_echo "$as_me: error: unknown endianness + presetting ac_cv_c_bigendian=no (or yes) will help" >&2;} + { (exit 1); exit 1; }; } ;; + esac + + +{ $as_echo "$as_me:$LINENO: checking assembler .cfi pseudo-op support" >&5 +$as_echo_n "checking assembler .cfi pseudo-op support... " >&6; } +if test "${libffi_cv_as_cfi_pseudo_op+set}" = set; then + $as_echo_n "(cached) " >&6 +else + + libffi_cv_as_cfi_pseudo_op=unknown + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +asm (".cfi_startproc\n\t.cfi_endproc"); +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + libffi_cv_as_cfi_pseudo_op=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + libffi_cv_as_cfi_pseudo_op=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:$LINENO: result: $libffi_cv_as_cfi_pseudo_op" >&5 +$as_echo "$libffi_cv_as_cfi_pseudo_op" >&6; } +if test "x$libffi_cv_as_cfi_pseudo_op" = xyes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_AS_CFI_PSEUDO_OP 1 +_ACEOF + +fi + +if test x$TARGET = xSPARC; then + { $as_echo "$as_me:$LINENO: checking assembler and linker support unaligned pc related relocs" >&5 +$as_echo_n "checking assembler and linker support unaligned pc related relocs... " >&6; } +if test "${libffi_cv_as_sparc_ua_pcrel+set}" = set; then + $as_echo_n "(cached) " >&6 +else + + save_CFLAGS="$CFLAGS" + save_LDFLAGS="$LDFLAGS" + CFLAGS="$CFLAGS -fpic" + LDFLAGS="$LDFLAGS -shared" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +asm (".text; foo: nop; .data; .align 4; .byte 0; .uaword %r_disp32(foo); .text"); +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + libffi_cv_as_sparc_ua_pcrel=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + libffi_cv_as_sparc_ua_pcrel=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + CFLAGS="$save_CFLAGS" + LDFLAGS="$save_LDFLAGS" +fi +{ $as_echo "$as_me:$LINENO: result: $libffi_cv_as_sparc_ua_pcrel" >&5 +$as_echo "$libffi_cv_as_sparc_ua_pcrel" >&6; } + if test "x$libffi_cv_as_sparc_ua_pcrel" = xyes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_AS_SPARC_UA_PCREL 1 +_ACEOF + + fi + + { $as_echo "$as_me:$LINENO: checking assembler .register pseudo-op support" >&5 +$as_echo_n "checking assembler .register pseudo-op support... " >&6; } +if test "${libffi_cv_as_register_pseudo_op+set}" = set; then + $as_echo_n "(cached) " >&6 +else + + libffi_cv_as_register_pseudo_op=unknown + # Check if we have .register + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +asm (".register %g2, #scratch"); +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + libffi_cv_as_register_pseudo_op=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + libffi_cv_as_register_pseudo_op=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +fi +{ $as_echo "$as_me:$LINENO: result: $libffi_cv_as_register_pseudo_op" >&5 +$as_echo "$libffi_cv_as_register_pseudo_op" >&6; } + if test "x$libffi_cv_as_register_pseudo_op" = xyes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_AS_REGISTER_PSEUDO_OP 1 +_ACEOF + + fi +fi + +if test x$TARGET = xX86 || test x$TARGET = xX86_64; then + { $as_echo "$as_me:$LINENO: checking assembler supports pc related relocs" >&5 +$as_echo_n "checking assembler supports pc related relocs... " >&6; } +if test "${libffi_cv_as_x86_pcrel+set}" = set; then + $as_echo_n "(cached) " >&6 +else + + libffi_cv_as_x86_pcrel=yes + echo '.text; foo: nop; .data; .long foo-.; .text' > conftest.s + if $CC $CFLAGS -c conftest.s 2>&1 | grep -i warning > /dev/null; then + libffi_cv_as_x86_pcrel=no + fi + +fi +{ $as_echo "$as_me:$LINENO: result: $libffi_cv_as_x86_pcrel" >&5 +$as_echo "$libffi_cv_as_x86_pcrel" >&6; } + if test "x$libffi_cv_as_x86_pcrel" = xyes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_AS_X86_PCREL 1 +_ACEOF + + fi +fi + +{ $as_echo "$as_me:$LINENO: checking whether .eh_frame section should be read-only" >&5 +$as_echo_n "checking whether .eh_frame section should be read-only... " >&6; } +if test "${libffi_cv_ro_eh_frame+set}" = set; then + $as_echo_n "(cached) " >&6 +else + + libffi_cv_ro_eh_frame=no + echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c + if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then + if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then + libffi_cv_ro_eh_frame=yes + elif grep '.section.*eh_frame.*#alloc' conftest.c \ + | grep -v '#write' > /dev/null; then + libffi_cv_ro_eh_frame=yes + fi + fi + rm -f conftest.* + +fi +{ $as_echo "$as_me:$LINENO: result: $libffi_cv_ro_eh_frame" >&5 +$as_echo "$libffi_cv_ro_eh_frame" >&6; } +if test "x$libffi_cv_ro_eh_frame" = xyes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_RO_EH_FRAME 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define EH_FRAME_FLAGS "a" +_ACEOF + +else + +cat >>confdefs.h <<\_ACEOF +#define EH_FRAME_FLAGS "aw" +_ACEOF + +fi + +{ $as_echo "$as_me:$LINENO: checking for __attribute__((visibility(\"hidden\")))" >&5 +$as_echo_n "checking for __attribute__((visibility(\"hidden\")))... " >&6; } +if test "${libffi_cv_hidden_visibility_attribute+set}" = set; then + $as_echo_n "(cached) " >&6 +else + + echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1; }' > conftest.c + libffi_cv_hidden_visibility_attribute=no + if { ac_try='${CC-cc} -Werror -S conftest.c -o conftest.s 1>&5' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + if grep '\.hidden.*foo' conftest.s >/dev/null; then + libffi_cv_hidden_visibility_attribute=yes + fi + fi + rm -f conftest.* + +fi +{ $as_echo "$as_me:$LINENO: result: $libffi_cv_hidden_visibility_attribute" >&5 +$as_echo "$libffi_cv_hidden_visibility_attribute" >&6; } +if test $libffi_cv_hidden_visibility_attribute = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_HIDDEN_VISIBILITY_ATTRIBUTE 1 +_ACEOF + +fi + + + + + + + + + +# Check whether --enable-debug was given. +if test "${enable_debug+set}" = set; then + enableval=$enable_debug; if test "$enable_debug" = "yes"; then + +cat >>confdefs.h <<\_ACEOF +#define FFI_DEBUG 1 +_ACEOF + + fi +fi + + +# Check whether --enable-structs was given. +if test "${enable_structs+set}" = set; then + enableval=$enable_structs; if test "$enable_structs" = "no"; then + +cat >>confdefs.h <<\_ACEOF +#define FFI_NO_STRUCTS 1 +_ACEOF + + fi +fi + + +# Check whether --enable-raw-api was given. +if test "${enable_raw_api+set}" = set; then + enableval=$enable_raw_api; if test "$enable_raw_api" = "no"; then + +cat >>confdefs.h <<\_ACEOF +#define FFI_NO_RAW_API 1 +_ACEOF + + fi +fi + + +# Check whether --enable-purify-safety was given. +if test "${enable_purify_safety+set}" = set; then + enableval=$enable_purify_safety; if test "$enable_purify_safety" = "yes"; then + +cat >>confdefs.h <<\_ACEOF +#define USING_PURIFY 1 +_ACEOF + + fi +fi + + +if test -n "$with_cross_host" && + test x"$with_cross_host" != x"no"; then + toolexecdir='$(exec_prefix)/$(target_alias)' + toolexeclibdir='$(toolexecdir)/lib' +else + toolexecdir='$(libdir)/gcc-lib/$(target_alias)' + toolexeclibdir='$(libdir)' +fi +multi_os_directory=`$CC -print-multi-os-directory` +case $multi_os_directory in + .) ;; # Avoid trailing /. + *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;; +esac + + + +if test "${multilib}" = "yes"; then + multilib_arg="--enable-multilib" +else + multilib_arg= +fi + +ac_config_commands="$ac_config_commands include" + +ac_config_commands="$ac_config_commands src" + + +ac_config_links="$ac_config_links include/ffitarget.h:src/$TARGETDIR/ffitarget.h" + + +ac_config_files="$ac_config_files include/ffi.h" + + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCCAS\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCCAS\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${TESTSUBDIR_TRUE}" && test -z "${TESTSUBDIR_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"TESTSUBDIR\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"TESTSUBDIR\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${MIPS_TRUE}" && test -z "${MIPS_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"MIPS\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"MIPS\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${SPARC_TRUE}" && test -z "${SPARC_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"SPARC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"SPARC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${X86_TRUE}" && test -z "${X86_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"X86\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"X86\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${X86_FREEBSD_TRUE}" && test -z "${X86_FREEBSD_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"X86_FREEBSD\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"X86_FREEBSD\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${X86_WIN32_TRUE}" && test -z "${X86_WIN32_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"X86_WIN32\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"X86_WIN32\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${X86_DARWIN_TRUE}" && test -z "${X86_DARWIN_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"X86_DARWIN\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"X86_DARWIN\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${ALPHA_TRUE}" && test -z "${ALPHA_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"ALPHA\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"ALPHA\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${IA64_TRUE}" && test -z "${IA64_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"IA64\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"IA64\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${M32R_TRUE}" && test -z "${M32R_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"M32R\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"M32R\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${M68K_TRUE}" && test -z "${M68K_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"M68K\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"M68K\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${POWERPC_TRUE}" && test -z "${POWERPC_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"POWERPC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"POWERPC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${POWERPC_AIX_TRUE}" && test -z "${POWERPC_AIX_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"POWERPC_AIX\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"POWERPC_AIX\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${POWERPC_DARWIN_TRUE}" && test -z "${POWERPC_DARWIN_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"POWERPC_DARWIN\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"POWERPC_DARWIN\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${POWERPC_FREEBSD_TRUE}" && test -z "${POWERPC_FREEBSD_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"POWERPC_FREEBSD\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"POWERPC_FREEBSD\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${ARM_TRUE}" && test -z "${ARM_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"ARM\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"ARM\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${LIBFFI_CRIS_TRUE}" && test -z "${LIBFFI_CRIS_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"LIBFFI_CRIS\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"LIBFFI_CRIS\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${FRV_TRUE}" && test -z "${FRV_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"FRV\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"FRV\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${S390_TRUE}" && test -z "${S390_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"S390\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"S390\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${X86_64_TRUE}" && test -z "${X86_64_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"X86_64\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"X86_64\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${SH_TRUE}" && test -z "${SH_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"SH\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"SH\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${SH64_TRUE}" && test -z "${SH64_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"SH64\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"SH64\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${PA_LINUX_TRUE}" && test -z "${PA_LINUX_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"PA_LINUX\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"PA_LINUX\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${PA_HPUX_TRUE}" && test -z "${PA_HPUX_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"PA_HPUX\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"PA_HPUX\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${PA64_HPUX_TRUE}" && test -z "${PA64_HPUX_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"PA64_HPUX\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"PA64_HPUX\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi + + +: ${CONFIG_STATUS=./config.status} +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 + +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by libffi $as_me 3.0.8, which was +generated by GNU Autoconf 2.63. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_links="$ac_config_links" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTION]... [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration links: +$config_links + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_version="\\ +libffi config.status 3.0.8 +configured by $0, generated by GNU Autoconf 2.63, + with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2008 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + { $as_echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { $as_echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +TARGETDIR="$TARGETDIR" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "fficonfig.h") CONFIG_HEADERS="$CONFIG_HEADERS fficonfig.h" ;; + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "include") CONFIG_COMMANDS="$CONFIG_COMMANDS include" ;; + "src") CONFIG_COMMANDS="$CONFIG_COMMANDS src" ;; + "include/ffitarget.h") CONFIG_LINKS="$CONFIG_LINKS include/ffitarget.h:src/$TARGETDIR/ffitarget.h" ;; + "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;; + "include/ffi.h") CONFIG_FILES="$CONFIG_FILES include/ffi.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "testsuite/Makefile") CONFIG_FILES="$CONFIG_FILES testsuite/Makefile" ;; + "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;; + "libffi.pc") CONFIG_FILES="$CONFIG_FILES libffi.pc" ;; + + *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_LINKS+set}" = set || CONFIG_LINKS=$config_links + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + $as_echo "$as_me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=' ' +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } +ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\).*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\).*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +$as_echo "$as_me: error: could not setup config files machinery" >&2;} + { (exit 1); exit 1; }; } +_ACEOF + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +$as_echo "$as_me: error: could not setup config headers machinery" >&2;} + { (exit 1); exit 1; }; } +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :L $CONFIG_LINKS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 +$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + ac_file_inputs="$ac_file_inputs '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +$as_echo "$as_me: error: could not create -" >&2;} + { (exit 1); exit 1; }; } + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + :L) + # + # CONFIG_LINK + # + + if test "$ac_source" = "$ac_file" && test "$srcdir" = '.'; then + : + else + # Prefer the file from the source tree if names are identical. + if test "$ac_source" = "$ac_file" || test ! -r "$ac_source"; then + ac_source=$srcdir/$ac_source + fi + + { $as_echo "$as_me:$LINENO: linking $ac_source to $ac_file" >&5 +$as_echo "$as_me: linking $ac_source to $ac_file" >&6;} + + if test ! -r "$ac_source"; then + { { $as_echo "$as_me:$LINENO: error: $ac_source: file not found" >&5 +$as_echo "$as_me: error: $ac_source: file not found" >&2;} + { (exit 1); exit 1; }; } + fi + rm -f "$ac_file" + + # Try a relative symlink, then a hard link, then a copy. + case $srcdir in + [\\/$]* | ?:[\\/]* ) ac_rel_source=$ac_source ;; + *) ac_rel_source=$ac_top_build_prefix$ac_source ;; + esac + ln -s "$ac_rel_source" "$ac_file" 2>/dev/null || + ln "$ac_source" "$ac_file" 2>/dev/null || + cp -p "$ac_source" "$ac_file" || + { { $as_echo "$as_me:$LINENO: error: cannot link or copy $ac_source to $ac_file" >&5 +$as_echo "$as_me: error: cannot link or copy $ac_source to $ac_file" >&2;} + { (exit 1); exit 1; }; } + fi + ;; + :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done + ;; + "include":C) test -d include || mkdir include ;; + "src":C) +test -d src || mkdir src +test -d src/$TARGETDIR || mkdir src/$TARGETDIR + ;; + + esac +done # for ac_tag + + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/toolkit/components/js-ctypes/src/libffi/configure.host b/toolkit/components/js-ctypes/src/libffi/configure.host new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/configure.host @@ -0,0 +1,11 @@ +# configure.host +# +# This shell script handles all host based configuration for libffi. +# + +# THIS TABLE IS SORTED. KEEP IT THAT WAY. +case "${host}" in + frv*-elf) + LDFLAGS=`echo $LDFLAGS | sed "s/\-B[^ ]*libgloss\/frv\///"`\ -B`pwd`/../libgloss/frv/ + ;; +esac diff --git a/toolkit/components/js-ctypes/src/libffi/fficonfig.h.in b/toolkit/components/js-ctypes/src/libffi/fficonfig.h.in new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/fficonfig.h.in @@ -0,0 +1,163 @@ +/* fficonfig.h.in. Generated from configure.ac by autoheader. */ + +/* Define to one of `_getb67', `GETB67', `getb67' for Cray-2 and Cray-YMP + systems. This function is required for `alloca.c' support on those systems. + */ +#undef CRAY_STACKSEG_END + +/* Define to 1 if using `alloca.c'. */ +#undef C_ALLOCA + +/* Define to the flags needed for the .section .eh_frame directive. */ +#undef EH_FRAME_FLAGS + +/* Define this if you want extra debugging. */ +#undef FFI_DEBUG + +/* Define this is you do not want support for the raw API. */ +#undef FFI_NO_RAW_API + +/* Define this is you do not want support for aggregate types. */ +#undef FFI_NO_STRUCTS + +/* Define to 1 if you have `alloca', as a function or macro. */ +#undef HAVE_ALLOCA + +/* Define to 1 if you have and it should be used (not on Ultrix). + */ +#undef HAVE_ALLOCA_H + +/* Define if your assembler supports .cfi_* directives. */ +#undef HAVE_AS_CFI_PSEUDO_OP + +/* Define if your assembler supports .register. */ +#undef HAVE_AS_REGISTER_PSEUDO_OP + +/* Define if your assembler and linker support unaligned PC relative relocs. + */ +#undef HAVE_AS_SPARC_UA_PCREL + +/* Define if your assembler supports PC relative relocs. */ +#undef HAVE_AS_X86_PCREL + +/* Define to 1 if you have the header file. */ +#undef HAVE_DLFCN_H + +/* Define if __attribute__((visibility("hidden"))) is supported. */ +#undef HAVE_HIDDEN_VISIBILITY_ATTRIBUTE + +/* Define to 1 if you have the header file. */ +#undef HAVE_INTTYPES_H + +/* Define if you have the long double type and it is bigger than a double */ +#undef HAVE_LONG_DOUBLE + +/* Define to 1 if you have the `memcpy' function. */ +#undef HAVE_MEMCPY + +/* Define to 1 if you have the header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the `mmap' function. */ +#undef HAVE_MMAP + +/* Define if mmap with MAP_ANON(YMOUS) works. */ +#undef HAVE_MMAP_ANON + +/* Define if mmap of /dev/zero works. */ +#undef HAVE_MMAP_DEV_ZERO + +/* Define if read-only mmap of a plain file works. */ +#undef HAVE_MMAP_FILE + +/* Define if .eh_frame sections should be read-only. */ +#undef HAVE_RO_EH_FRAME + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_MMAN_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the header file. */ +#undef HAVE_UNISTD_H + +/* Define to 1 if your C compiler doesn't accept -c and -o together. */ +#undef NO_MINUS_C_MINUS_O + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* The size of `double', as computed by sizeof. */ +#undef SIZEOF_DOUBLE + +/* The size of `long double', as computed by sizeof. */ +#undef SIZEOF_LONG_DOUBLE + +/* If using the C implementation of alloca, define if you know the + direction of stack growth for your system; otherwise it will be + automatically deduced at runtime. + STACK_DIRECTION > 0 => grows toward higher addresses + STACK_DIRECTION < 0 => grows toward lower addresses + STACK_DIRECTION = 0 => direction of growth unknown */ +#undef STACK_DIRECTION + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Define this if you are using Purify and want to suppress spurious messages. + */ +#undef USING_PURIFY + +/* Version number of package */ +#undef VERSION + +/* Define to 1 if your processor stores words with the most significant byte + first (like Motorola and SPARC, unlike Intel and VAX). */ +#undef WORDS_BIGENDIAN + + +#ifdef HAVE_HIDDEN_VISIBILITY_ATTRIBUTE +#ifdef LIBFFI_ASM +#define FFI_HIDDEN(name) .hidden name +#else +#define FFI_HIDDEN __attribute__ ((visibility ("hidden"))) +#endif +#else +#ifdef LIBFFI_ASM +#define FFI_HIDDEN(name) +#else +#define FFI_HIDDEN +#endif +#endif + diff --git a/toolkit/components/js-ctypes/src/libffi/include/ffi.h.in b/toolkit/components/js-ctypes/src/libffi/include/ffi.h.in new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/include/ffi.h.in @@ -0,0 +1,393 @@ +/* -----------------------------------------------------------------*-C-*- + libffi @VERSION@ - Copyright (c) 1996-2003, 2007, 2008 Red Hat, Inc. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + ``Software''), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + ----------------------------------------------------------------------- */ + +/* ------------------------------------------------------------------- + The basic API is described in the README file. + + The raw API is designed to bypass some of the argument packing + and unpacking on architectures for which it can be avoided. + + The closure API allows interpreted functions to be packaged up + inside a C function pointer, so that they can be called as C functions, + with no understanding on the client side that they are interpreted. + It can also be used in other cases in which it is necessary to package + up a user specified parameter and a function pointer as a single + function pointer. + + The closure API must be implemented in order to get its functionality, + e.g. for use by gij. Routines are provided to emulate the raw API + if the underlying platform doesn't allow faster implementation. + + More details on the raw and cloure API can be found in: + + http://gcc.gnu.org/ml/java/1999-q3/msg00138.html + + and + + http://gcc.gnu.org/ml/java/1999-q3/msg00174.html + -------------------------------------------------------------------- */ + +#ifndef LIBFFI_H +#define LIBFFI_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Specify which architecture libffi is configured for. */ +#ifndef @TARGET@ +#define @TARGET@ +#endif + +/* ---- System configuration information --------------------------------- */ + +#include + +#ifndef LIBFFI_ASM + +#include +#include + +/* LONG_LONG_MAX is not always defined (not if STRICT_ANSI, for example). + But we can find it either under the correct ANSI name, or under GNU + C's internal name. */ +#ifdef LONG_LONG_MAX +# define FFI_LONG_LONG_MAX LONG_LONG_MAX +#else +# ifdef LLONG_MAX +# define FFI_LONG_LONG_MAX LLONG_MAX +# else +# ifdef __GNUC__ +# define FFI_LONG_LONG_MAX __LONG_LONG_MAX__ +# endif +# endif +#endif + +/* The closure code assumes that this works on pointers, i.e. a size_t */ +/* can hold a pointer. */ + +typedef struct _ffi_type +{ + size_t size; + unsigned short alignment; + unsigned short type; + struct _ffi_type **elements; +} ffi_type; + +#ifndef LIBFFI_HIDE_BASIC_TYPES +#if SCHAR_MAX == 127 +# define ffi_type_uchar ffi_type_uint8 +# define ffi_type_schar ffi_type_sint8 +#else + #error "char size not supported" +#endif + +#if SHRT_MAX == 32767 +# define ffi_type_ushort ffi_type_uint16 +# define ffi_type_sshort ffi_type_sint16 +#elif SHRT_MAX == 2147483647 +# define ffi_type_ushort ffi_type_uint32 +# define ffi_type_sshort ffi_type_sint32 +#else + #error "short size not supported" +#endif + +#if INT_MAX == 32767 +# define ffi_type_uint ffi_type_uint16 +# define ffi_type_sint ffi_type_sint16 +#elif INT_MAX == 2147483647 +# define ffi_type_uint ffi_type_uint32 +# define ffi_type_sint ffi_type_sint32 +#elif INT_MAX == 9223372036854775807 +# define ffi_type_uint ffi_type_uint64 +# define ffi_type_sint ffi_type_sint64 +#else + #error "int size not supported" +#endif + +#if LONG_MAX == 2147483647 +# if FFI_LONG_LONG_MAX != 9223372036854775807 + #error "no 64-bit data type supported" +# endif +#elif LONG_MAX != 9223372036854775807 + #error "long size not supported" +#endif + +#if LONG_MAX == 2147483647 +# define ffi_type_ulong ffi_type_uint32 +# define ffi_type_slong ffi_type_sint32 +#elif LONG_MAX == 9223372036854775807 +# define ffi_type_ulong ffi_type_uint64 +# define ffi_type_slong ffi_type_sint64 +#else + #error "long size not supported" +#endif + +/* These are defined in types.c */ +extern ffi_type ffi_type_void; +extern ffi_type ffi_type_uint8; +extern ffi_type ffi_type_sint8; +extern ffi_type ffi_type_uint16; +extern ffi_type ffi_type_sint16; +extern ffi_type ffi_type_uint32; +extern ffi_type ffi_type_sint32; +extern ffi_type ffi_type_uint64; +extern ffi_type ffi_type_sint64; +extern ffi_type ffi_type_float; +extern ffi_type ffi_type_double; +extern ffi_type ffi_type_pointer; + +#if @HAVE_LONG_DOUBLE@ +extern ffi_type ffi_type_longdouble; +#else +#define ffi_type_longdouble ffi_type_double +#endif +#endif /* LIBFFI_HIDE_BASIC_TYPES */ + +typedef enum { + FFI_OK = 0, + FFI_BAD_TYPEDEF, + FFI_BAD_ABI +} ffi_status; + +typedef unsigned FFI_TYPE; + +typedef struct { + ffi_abi abi; + unsigned nargs; + ffi_type **arg_types; + ffi_type *rtype; + unsigned bytes; + unsigned flags; +#ifdef FFI_EXTRA_CIF_FIELDS + FFI_EXTRA_CIF_FIELDS; +#endif +} ffi_cif; + +/* ---- Definitions for the raw API -------------------------------------- */ + +#ifndef FFI_SIZEOF_ARG +# if LONG_MAX == 2147483647 +# define FFI_SIZEOF_ARG 4 +# elif LONG_MAX == 9223372036854775807 +# define FFI_SIZEOF_ARG 8 +# endif +#endif + +#ifndef FFI_SIZEOF_JAVA_RAW +# define FFI_SIZEOF_JAVA_RAW FFI_SIZEOF_ARG +#endif + +typedef union { + ffi_sarg sint; + ffi_arg uint; + float flt; + char data[FFI_SIZEOF_ARG]; + void* ptr; +} ffi_raw; + +#if FFI_SIZEOF_JAVA_RAW == 4 && FFI_SIZEOF_ARG == 8 +/* This is a special case for mips64/n32 ABI (and perhaps others) where + sizeof(void *) is 4 and FFI_SIZEOF_ARG is 8. */ +typedef union { + signed int sint; + unsigned int uint; + float flt; + char data[FFI_SIZEOF_JAVA_RAW]; + void* ptr; +} ffi_java_raw; +#else +typedef ffi_raw ffi_java_raw; +#endif + + +void ffi_raw_call (ffi_cif *cif, + void (*fn)(void), + void *rvalue, + ffi_raw *avalue); + +void ffi_ptrarray_to_raw (ffi_cif *cif, void **args, ffi_raw *raw); +void ffi_raw_to_ptrarray (ffi_cif *cif, ffi_raw *raw, void **args); +size_t ffi_raw_size (ffi_cif *cif); + +/* This is analogous to the raw API, except it uses Java parameter */ +/* packing, even on 64-bit machines. I.e. on 64-bit machines */ +/* longs and doubles are followed by an empty 64-bit word. */ + +void ffi_java_raw_call (ffi_cif *cif, + void (*fn)(void), + void *rvalue, + ffi_java_raw *avalue); + +void ffi_java_ptrarray_to_raw (ffi_cif *cif, void **args, ffi_java_raw *raw); +void ffi_java_raw_to_ptrarray (ffi_cif *cif, ffi_java_raw *raw, void **args); +size_t ffi_java_raw_size (ffi_cif *cif); + +/* ---- Definitions for closures ----------------------------------------- */ + +#if FFI_CLOSURES + +typedef struct { + char tramp[FFI_TRAMPOLINE_SIZE]; + ffi_cif *cif; + void (*fun)(ffi_cif*,void*,void**,void*); + void *user_data; +} ffi_closure __attribute__((aligned (8))); + +void *ffi_closure_alloc (size_t size, void **code); +void ffi_closure_free (void *); + +ffi_status +ffi_prep_closure (ffi_closure*, + ffi_cif *, + void (*fun)(ffi_cif*,void*,void**,void*), + void *user_data); + +ffi_status +ffi_prep_closure_loc (ffi_closure*, + ffi_cif *, + void (*fun)(ffi_cif*,void*,void**,void*), + void *user_data, + void*codeloc); + +typedef struct { + char tramp[FFI_TRAMPOLINE_SIZE]; + + ffi_cif *cif; + +#if !FFI_NATIVE_RAW_API + + /* if this is enabled, then a raw closure has the same layout + as a regular closure. We use this to install an intermediate + handler to do the transaltion, void** -> ffi_raw*. */ + + void (*translate_args)(ffi_cif*,void*,void**,void*); + void *this_closure; + +#endif + + void (*fun)(ffi_cif*,void*,ffi_raw*,void*); + void *user_data; + +} ffi_raw_closure; + +typedef struct { + char tramp[FFI_TRAMPOLINE_SIZE]; + + ffi_cif *cif; + +#if !FFI_NATIVE_RAW_API + + /* if this is enabled, then a raw closure has the same layout + as a regular closure. We use this to install an intermediate + handler to do the transaltion, void** -> ffi_raw*. */ + + void (*translate_args)(ffi_cif*,void*,void**,void*); + void *this_closure; + +#endif + + void (*fun)(ffi_cif*,void*,ffi_java_raw*,void*); + void *user_data; + +} ffi_java_raw_closure; + +ffi_status +ffi_prep_raw_closure (ffi_raw_closure*, + ffi_cif *cif, + void (*fun)(ffi_cif*,void*,ffi_raw*,void*), + void *user_data); + +ffi_status +ffi_prep_raw_closure_loc (ffi_raw_closure*, + ffi_cif *cif, + void (*fun)(ffi_cif*,void*,ffi_raw*,void*), + void *user_data, + void *codeloc); + +ffi_status +ffi_prep_java_raw_closure (ffi_java_raw_closure*, + ffi_cif *cif, + void (*fun)(ffi_cif*,void*,ffi_java_raw*,void*), + void *user_data); + +ffi_status +ffi_prep_java_raw_closure_loc (ffi_java_raw_closure*, + ffi_cif *cif, + void (*fun)(ffi_cif*,void*,ffi_java_raw*,void*), + void *user_data, + void *codeloc); + +#endif /* FFI_CLOSURES */ + +/* ---- Public interface definition -------------------------------------- */ + +ffi_status ffi_prep_cif(ffi_cif *cif, + ffi_abi abi, + unsigned int nargs, + ffi_type *rtype, + ffi_type **atypes); + +void ffi_call(ffi_cif *cif, + void (*fn)(void), + void *rvalue, + void **avalue); + +/* Useful for eliminating compiler warnings */ +#define FFI_FN(f) ((void (*)(void))f) + +/* ---- Definitions shared with assembly code ---------------------------- */ + +#endif + +/* If these change, update src/mips/ffitarget.h. */ +#define FFI_TYPE_VOID 0 +#define FFI_TYPE_INT 1 +#define FFI_TYPE_FLOAT 2 +#define FFI_TYPE_DOUBLE 3 +#if @HAVE_LONG_DOUBLE@ +#define FFI_TYPE_LONGDOUBLE 4 +#else +#define FFI_TYPE_LONGDOUBLE FFI_TYPE_DOUBLE +#endif +#define FFI_TYPE_UINT8 5 +#define FFI_TYPE_SINT8 6 +#define FFI_TYPE_UINT16 7 +#define FFI_TYPE_SINT16 8 +#define FFI_TYPE_UINT32 9 +#define FFI_TYPE_SINT32 10 +#define FFI_TYPE_UINT64 11 +#define FFI_TYPE_SINT64 12 +#define FFI_TYPE_STRUCT 13 +#define FFI_TYPE_POINTER 14 + +/* This should always refer to the last type code (for sanity checks) */ +#define FFI_TYPE_LAST FFI_TYPE_POINTER + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/toolkit/components/js-ctypes/src/libffi/include/ffi_common.h b/toolkit/components/js-ctypes/src/libffi/include/ffi_common.h new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/include/ffi_common.h @@ -0,0 +1,98 @@ +/* ----------------------------------------------------------------------- + ffi_common.h - Copyright (c) 1996 Red Hat, Inc. + Copyright (C) 2007 Free Software Foundation, Inc + + Common internal definitions and macros. Only necessary for building + libffi. + ----------------------------------------------------------------------- */ + +#ifndef FFI_COMMON_H +#define FFI_COMMON_H + +#ifdef __cplusplus +extern "C" { +#endif + +#include + +/* Do not move this. Some versions of AIX are very picky about where + this is positioned. */ +#ifdef __GNUC__ +# define alloca __builtin_alloca +# define MAYBE_UNUSED __attribute__((__unused__)) +#else +# define MAYBE_UNUSED +# if HAVE_ALLOCA_H +# include +# else +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ +char *alloca (); +# endif +# endif +# endif +#endif + +/* Check for the existence of memcpy. */ +#if STDC_HEADERS +# include +#else +# ifndef HAVE_MEMCPY +# define memcpy(d, s, n) bcopy ((s), (d), (n)) +# endif +#endif + +#if defined(FFI_DEBUG) +#include +#endif + +#ifdef FFI_DEBUG +void ffi_assert(char *expr, char *file, int line); +void ffi_stop_here(void); +void ffi_type_test(ffi_type *a, char *file, int line); + +#define FFI_ASSERT(x) ((x) ? (void)0 : ffi_assert(#x, __FILE__,__LINE__)) +#define FFI_ASSERT_AT(x, f, l) ((x) ? 0 : ffi_assert(#x, (f), (l))) +#define FFI_ASSERT_VALID_TYPE(x) ffi_type_test (x, __FILE__, __LINE__) +#else +#define FFI_ASSERT(x) +#define FFI_ASSERT_AT(x, f, l) +#define FFI_ASSERT_VALID_TYPE(x) +#endif + +#define ALIGN(v, a) (((((size_t) (v))-1) | ((a)-1))+1) +#define ALIGN_DOWN(v, a) (((size_t) (v)) & -a) + +/* Perform machine dependent cif processing */ +ffi_status ffi_prep_cif_machdep(ffi_cif *cif); + +/* Extended cif, used in callback from assembly routine */ +typedef struct +{ + ffi_cif *cif; + void *rvalue; + void **avalue; +} extended_cif; + +/* Terse sized type definitions. */ +typedef unsigned int UINT8 __attribute__((__mode__(__QI__))); +typedef signed int SINT8 __attribute__((__mode__(__QI__))); +typedef unsigned int UINT16 __attribute__((__mode__(__HI__))); +typedef signed int SINT16 __attribute__((__mode__(__HI__))); +typedef unsigned int UINT32 __attribute__((__mode__(__SI__))); +typedef signed int SINT32 __attribute__((__mode__(__SI__))); +typedef unsigned int UINT64 __attribute__((__mode__(__DI__))); +typedef signed int SINT64 __attribute__((__mode__(__DI__))); + +typedef float FLOAT32; + + +#ifdef __cplusplus +} +#endif + +#endif + + diff --git a/toolkit/components/js-ctypes/src/libffi/install-sh b/toolkit/components/js-ctypes/src/libffi/install-sh new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/install-sh @@ -0,0 +1,323 @@ +#!/bin/sh +# install - install a program, script, or datafile + +scriptversion=2004-12-17.09 + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. +# +# Calling this script install-sh is preferred over install.sh, to prevent +# `make' implicit rules from creating a file called install from it +# when there is no Makefile. +# +# This script is compatible with the BSD install script, but was written +# from scratch. It can only install one file at a time, a restriction +# shared with many OS's install programs. + +# set DOITPROG to echo to test this script + +# Don't use :- since 4.3BSD and earlier shells don't like it. +doit="${DOITPROG-}" + +# put in absolute paths if you don't have them in your path; or use env. vars. + +mvprog="${MVPROG-mv}" +cpprog="${CPPROG-cp}" +chmodprog="${CHMODPROG-chmod}" +chownprog="${CHOWNPROG-chown}" +chgrpprog="${CHGRPPROG-chgrp}" +stripprog="${STRIPPROG-strip}" +rmprog="${RMPROG-rm}" +mkdirprog="${MKDIRPROG-mkdir}" + +chmodcmd="$chmodprog 0755" +chowncmd= +chgrpcmd= +stripcmd= +rmcmd="$rmprog -f" +mvcmd="$mvprog" +src= +dst= +dir_arg= +dstarg= +no_target_directory= + +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. + +Options: +-c (ignored) +-d create directories instead of installing files. +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. +--help display this help and exit. +--version display version info and exit. + +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG +" + +while test -n "$1"; do + case $1 in + -c) shift + continue;; + + -d) dir_arg=true + shift + continue;; + + -g) chgrpcmd="$chgrpprog $2" + shift + shift + continue;; + + --help) echo "$usage"; exit 0;; + + -m) chmodcmd="$chmodprog $2" + shift + shift + continue;; + + -o) chowncmd="$chownprog $2" + shift + shift + continue;; + + -s) stripcmd=$stripprog + shift + continue;; + + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; + + --version) echo "$0 $scriptversion"; exit 0;; + + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; + esac +done + +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +for src +do + # Protect names starting with `-'. + case $src in + -*) src=./$src ;; + esac + + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi + fi + + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'` + + # Make sure that the destination directory exists. + + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + shift + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } + + else + dstfile=`basename "$dst"` + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && + + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ + || { + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit 1 + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit 1; } +done + +# The final little trick to "correctly" pass the exit status to the exit trap. +{ + (exit 0); exit 0 +} + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff --git a/toolkit/components/js-ctypes/src/libffi/src/alpha/ffi.c b/toolkit/components/js-ctypes/src/libffi/src/alpha/ffi.c new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/src/alpha/ffi.c @@ -0,0 +1,284 @@ +/* ----------------------------------------------------------------------- + ffi.c - Copyright (c) 1998, 2001, 2007, 2008 Red Hat, Inc. + + Alpha Foreign Function Interface + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + ``Software''), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + ----------------------------------------------------------------------- */ + +#include +#include +#include + +/* Force FFI_TYPE_LONGDOUBLE to be different than FFI_TYPE_DOUBLE; + all further uses in this file will refer to the 128-bit type. */ +#if defined(__LONG_DOUBLE_128__) +# if FFI_TYPE_LONGDOUBLE != 4 +# error FFI_TYPE_LONGDOUBLE out of date +# endif +#else +# undef FFI_TYPE_LONGDOUBLE +# define FFI_TYPE_LONGDOUBLE 4 +#endif + +extern void ffi_call_osf(void *, unsigned long, unsigned, void *, void (*)(void)) + FFI_HIDDEN; +extern void ffi_closure_osf(void) FFI_HIDDEN; + + +ffi_status +ffi_prep_cif_machdep(ffi_cif *cif) +{ + /* Adjust cif->bytes to represent a minimum 6 words for the temporary + register argument loading area. */ + if (cif->bytes < 6*FFI_SIZEOF_ARG) + cif->bytes = 6*FFI_SIZEOF_ARG; + + /* Set the return type flag */ + switch (cif->rtype->type) + { + case FFI_TYPE_STRUCT: + case FFI_TYPE_FLOAT: + case FFI_TYPE_DOUBLE: + cif->flags = cif->rtype->type; + break; + + case FFI_TYPE_LONGDOUBLE: + /* 128-bit long double is returned in memory, like a struct. */ + cif->flags = FFI_TYPE_STRUCT; + break; + + default: + cif->flags = FFI_TYPE_INT; + break; + } + + return FFI_OK; +} + + +void +ffi_call(ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue) +{ + unsigned long *stack, *argp; + long i, avn; + ffi_type **arg_types; + + /* If the return value is a struct and we don't have a return + value address then we need to make one. */ + if (rvalue == NULL && cif->flags == FFI_TYPE_STRUCT) + rvalue = alloca(cif->rtype->size); + + /* Allocate the space for the arguments, plus 4 words of temp + space for ffi_call_osf. */ + argp = stack = alloca(cif->bytes + 4*FFI_SIZEOF_ARG); + + if (cif->flags == FFI_TYPE_STRUCT) + *(void **) argp++ = rvalue; + + i = 0; + avn = cif->nargs; + arg_types = cif->arg_types; + + while (i < avn) + { + size_t size = (*arg_types)->size; + + switch ((*arg_types)->type) + { + case FFI_TYPE_SINT8: + *(SINT64 *) argp = *(SINT8 *)(* avalue); + break; + + case FFI_TYPE_UINT8: + *(SINT64 *) argp = *(UINT8 *)(* avalue); + break; + + case FFI_TYPE_SINT16: + *(SINT64 *) argp = *(SINT16 *)(* avalue); + break; + + case FFI_TYPE_UINT16: + *(SINT64 *) argp = *(UINT16 *)(* avalue); + break; + + case FFI_TYPE_SINT32: + case FFI_TYPE_UINT32: + /* Note that unsigned 32-bit quantities are sign extended. */ + *(SINT64 *) argp = *(SINT32 *)(* avalue); + break; + + case FFI_TYPE_SINT64: + case FFI_TYPE_UINT64: + case FFI_TYPE_POINTER: + *(UINT64 *) argp = *(UINT64 *)(* avalue); + break; + + case FFI_TYPE_FLOAT: + if (argp - stack < 6) + { + /* Note the conversion -- all the fp regs are loaded as + doubles. The in-register format is the same. */ + *(double *) argp = *(float *)(* avalue); + } + else + *(float *) argp = *(float *)(* avalue); + break; + + case FFI_TYPE_DOUBLE: + *(double *) argp = *(double *)(* avalue); + break; + + case FFI_TYPE_LONGDOUBLE: + /* 128-bit long double is passed by reference. */ + *(long double **) argp = (long double *)(* avalue); + size = sizeof (long double *); + break; + + case FFI_TYPE_STRUCT: + memcpy(argp, *avalue, (*arg_types)->size); + break; + + default: + FFI_ASSERT(0); + } + + argp += ALIGN(size, FFI_SIZEOF_ARG) / FFI_SIZEOF_ARG; + i++, arg_types++, avalue++; + } + + ffi_call_osf(stack, cif->bytes, cif->flags, rvalue, fn); +} + + +ffi_status +ffi_prep_closure_loc (ffi_closure* closure, + ffi_cif* cif, + void (*fun)(ffi_cif*, void*, void**, void*), + void *user_data, + void *codeloc) +{ + unsigned int *tramp; + + tramp = (unsigned int *) &closure->tramp[0]; + tramp[0] = 0x47fb0401; /* mov $27,$1 */ + tramp[1] = 0xa77b0010; /* ldq $27,16($27) */ + tramp[2] = 0x6bfb0000; /* jmp $31,($27),0 */ + tramp[3] = 0x47ff041f; /* nop */ + *(void **) &tramp[4] = ffi_closure_osf; + + closure->cif = cif; + closure->fun = fun; + closure->user_data = user_data; + + /* Flush the Icache. + + Tru64 UNIX as doesn't understand the imb mnemonic, so use call_pal + instead, since both Compaq as and gas can handle it. + + 0x86 is PAL_imb in Tru64 UNIX . */ + asm volatile ("call_pal 0x86" : : : "memory"); + + return FFI_OK; +} + + +long FFI_HIDDEN +ffi_closure_osf_inner(ffi_closure *closure, void *rvalue, unsigned long *argp) +{ + ffi_cif *cif; + void **avalue; + ffi_type **arg_types; + long i, avn, argn; + + cif = closure->cif; + avalue = alloca(cif->nargs * sizeof(void *)); + + argn = 0; + + /* Copy the caller's structure return address to that the closure + returns the data directly to the caller. */ + if (cif->flags == FFI_TYPE_STRUCT) + { + rvalue = (void *) argp[0]; + argn = 1; + } + + i = 0; + avn = cif->nargs; + arg_types = cif->arg_types; + + /* Grab the addresses of the arguments from the stack frame. */ + while (i < avn) + { + size_t size = arg_types[i]->size; + + switch (arg_types[i]->type) + { + case FFI_TYPE_SINT8: + case FFI_TYPE_UINT8: + case FFI_TYPE_SINT16: + case FFI_TYPE_UINT16: + case FFI_TYPE_SINT32: + case FFI_TYPE_UINT32: + case FFI_TYPE_SINT64: + case FFI_TYPE_UINT64: + case FFI_TYPE_POINTER: + case FFI_TYPE_STRUCT: + avalue[i] = &argp[argn]; + break; + + case FFI_TYPE_FLOAT: + if (argn < 6) + { + /* Floats coming from registers need conversion from double + back to float format. */ + *(float *)&argp[argn - 6] = *(double *)&argp[argn - 6]; + avalue[i] = &argp[argn - 6]; + } + else + avalue[i] = &argp[argn]; + break; + + case FFI_TYPE_DOUBLE: + avalue[i] = &argp[argn - (argn < 6 ? 6 : 0)]; + break; + + case FFI_TYPE_LONGDOUBLE: + /* 128-bit long double is passed by reference. */ + avalue[i] = (long double *) argp[argn]; + size = sizeof (long double *); + break; + + default: + abort (); + } + + argn += ALIGN(size, FFI_SIZEOF_ARG) / FFI_SIZEOF_ARG; + i++; + } + + /* Invoke the closure. */ + closure->fun (cif, rvalue, avalue, closure->user_data); + + /* Tell ffi_closure_osf how to perform return type promotions. */ + return cif->rtype->type; +} diff --git a/toolkit/components/js-ctypes/src/libffi/src/alpha/ffitarget.h b/toolkit/components/js-ctypes/src/libffi/src/alpha/ffitarget.h new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/src/alpha/ffitarget.h @@ -0,0 +1,48 @@ +/* -----------------------------------------------------------------*-C-*- + ffitarget.h - Copyright (c) 1996-2003 Red Hat, Inc. + Target configuration macros for Alpha. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + ``Software''), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + ----------------------------------------------------------------------- */ + +#ifndef LIBFFI_TARGET_H +#define LIBFFI_TARGET_H + +#ifndef LIBFFI_ASM +typedef unsigned long ffi_arg; +typedef signed long ffi_sarg; + +typedef enum ffi_abi { + FFI_FIRST_ABI = 0, + FFI_OSF, + FFI_LAST_ABI, + FFI_DEFAULT_ABI = FFI_OSF +} ffi_abi; +#endif + +/* ---- Definitions for closures ----------------------------------------- */ + +#define FFI_CLOSURES 1 +#define FFI_TRAMPOLINE_SIZE 24 +#define FFI_NATIVE_RAW_API 0 + +#endif diff --git a/toolkit/components/js-ctypes/src/libffi/src/alpha/osf.S b/toolkit/components/js-ctypes/src/libffi/src/alpha/osf.S new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/src/alpha/osf.S @@ -0,0 +1,366 @@ +/* ----------------------------------------------------------------------- + osf.S - Copyright (c) 1998, 2001, 2007, 2008 Red Hat + + Alpha/OSF Foreign Function Interface + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + ``Software''), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + ----------------------------------------------------------------------- */ + +#define LIBFFI_ASM +#include +#include + + .arch ev6 + .text + +/* ffi_call_osf (void *args, unsigned long bytes, unsigned flags, + void *raddr, void (*fnaddr)(void)); + + Bit o trickiness here -- ARGS+BYTES is the base of the stack frame + for this function. This has been allocated by ffi_call. We also + deallocate some of the stack that has been alloca'd. */ + + .align 3 + .globl ffi_call_osf + .ent ffi_call_osf + FFI_HIDDEN(ffi_call_osf) + +ffi_call_osf: + .frame $15, 32, $26, 0 + .mask 0x4008000, -32 +$LFB1: + addq $16,$17,$1 + mov $16, $30 + stq $26, 0($1) + stq $15, 8($1) + stq $18, 16($1) + mov $1, $15 +$LCFI1: + .prologue 0 + + stq $19, 24($1) + mov $20, $27 + + # Load up all of the (potential) argument registers. + ldq $16, 0($30) + ldt $f16, 0($30) + ldt $f17, 8($30) + ldq $17, 8($30) + ldt $f18, 16($30) + ldq $18, 16($30) + ldt $f19, 24($30) + ldq $19, 24($30) + ldt $f20, 32($30) + ldq $20, 32($30) + ldt $f21, 40($30) + ldq $21, 40($30) + + # Deallocate the register argument area. + lda $30, 48($30) + + jsr $26, ($27), 0 + ldgp $29, 0($26) + + # If the return value pointer is NULL, assume no return value. + ldq $19, 24($15) + ldq $18, 16($15) + ldq $26, 0($15) +$LCFI2: + beq $19, $noretval + + # Store the return value out in the proper type. + cmpeq $18, FFI_TYPE_INT, $1 + bne $1, $retint + cmpeq $18, FFI_TYPE_FLOAT, $2 + bne $2, $retfloat + cmpeq $18, FFI_TYPE_DOUBLE, $3 + bne $3, $retdouble + + .align 3 +$noretval: + ldq $15, 8($15) + ret + + .align 4 +$retint: + stq $0, 0($19) + nop + ldq $15, 8($15) + ret + + .align 4 +$retfloat: + sts $f0, 0($19) + nop + ldq $15, 8($15) + ret + + .align 4 +$retdouble: + stt $f0, 0($19) + nop + ldq $15, 8($15) + ret +$LFE1: + + .end ffi_call_osf + +/* ffi_closure_osf(...) + + Receives the closure argument in $1. */ + + .align 3 + .globl ffi_closure_osf + .ent ffi_closure_osf + FFI_HIDDEN(ffi_closure_osf) + +ffi_closure_osf: + .frame $30, 16*8, $26, 0 + .mask 0x4000000, -16*8 +$LFB2: + ldgp $29, 0($27) + subq $30, 16*8, $30 +$LCFI5: + stq $26, 0($30) +$LCFI6: + .prologue 1 + + # Store all of the potential argument registers in va_list format. + stt $f16, 4*8($30) + stt $f17, 5*8($30) + stt $f18, 6*8($30) + stt $f19, 7*8($30) + stt $f20, 8*8($30) + stt $f21, 9*8($30) + stq $16, 10*8($30) + stq $17, 11*8($30) + stq $18, 12*8($30) + stq $19, 13*8($30) + stq $20, 14*8($30) + stq $21, 15*8($30) + + # Call ffi_closure_osf_inner to do the bulk of the work. + mov $1, $16 + lda $17, 2*8($30) + lda $18, 10*8($30) + jsr $26, ffi_closure_osf_inner + ldgp $29, 0($26) + ldq $26, 0($30) + + # Load up the return value in the proper type. + lda $1, $load_table + s4addq $0, $1, $1 + ldl $1, 0($1) + addq $1, $29, $1 + jmp $31, ($1), $load_32 + + .align 4 +$load_none: + addq $30, 16*8, $30 + ret + + .align 4 +$load_float: + lds $f0, 16($30) + nop + addq $30, 16*8, $30 + ret + + .align 4 +$load_double: + ldt $f0, 16($30) + nop + addq $30, 16*8, $30 + ret + + .align 4 +$load_u8: +#ifdef __alpha_bwx__ + ldbu $0, 16($30) + nop +#else + ldq $0, 16($30) + and $0, 255, $0 +#endif + addq $30, 16*8, $30 + ret + + .align 4 +$load_s8: +#ifdef __alpha_bwx__ + ldbu $0, 16($30) + sextb $0, $0 +#else + ldq $0, 16($30) + sll $0, 56, $0 + sra $0, 56, $0 +#endif + addq $30, 16*8, $30 + ret + + .align 4 +$load_u16: +#ifdef __alpha_bwx__ + ldwu $0, 16($30) + nop +#else + ldq $0, 16($30) + zapnot $0, 3, $0 +#endif + addq $30, 16*8, $30 + ret + + .align 4 +$load_s16: +#ifdef __alpha_bwx__ + ldwu $0, 16($30) + sextw $0, $0 +#else + ldq $0, 16($30) + sll $0, 48, $0 + sra $0, 48, $0 +#endif + addq $30, 16*8, $30 + ret + + .align 4 +$load_32: + ldl $0, 16($30) + nop + addq $30, 16*8, $30 + ret + + .align 4 +$load_64: + ldq $0, 16($30) + nop + addq $30, 16*8, $30 + ret +$LFE2: + + .end ffi_closure_osf + +#ifdef __ELF__ +.section .rodata +#else +.rdata +#endif +$load_table: + .gprel32 $load_none # FFI_TYPE_VOID + .gprel32 $load_32 # FFI_TYPE_INT + .gprel32 $load_float # FFI_TYPE_FLOAT + .gprel32 $load_double # FFI_TYPE_DOUBLE + .gprel32 $load_none # FFI_TYPE_LONGDOUBLE + .gprel32 $load_u8 # FFI_TYPE_UINT8 + .gprel32 $load_s8 # FFI_TYPE_SINT8 + .gprel32 $load_u16 # FFI_TYPE_UINT16 + .gprel32 $load_s16 # FFI_TYPE_SINT16 + .gprel32 $load_32 # FFI_TYPE_UINT32 + .gprel32 $load_32 # FFI_TYPE_SINT32 + .gprel32 $load_64 # FFI_TYPE_UINT64 + .gprel32 $load_64 # FFI_TYPE_SINT64 + .gprel32 $load_none # FFI_TYPE_STRUCT + .gprel32 $load_64 # FFI_TYPE_POINTER + +/* Assert that the table above is in sync with ffi.h. */ + +#if FFI_TYPE_FLOAT != 2 \ + || FFI_TYPE_DOUBLE != 3 \ + || FFI_TYPE_UINT8 != 5 \ + || FFI_TYPE_SINT8 != 6 \ + || FFI_TYPE_UINT16 != 7 \ + || FFI_TYPE_SINT16 != 8 \ + || FFI_TYPE_UINT32 != 9 \ + || FFI_TYPE_SINT32 != 10 \ + || FFI_TYPE_UINT64 != 11 \ + || FFI_TYPE_SINT64 != 12 \ + || FFI_TYPE_STRUCT != 13 \ + || FFI_TYPE_POINTER != 14 \ + || FFI_TYPE_LAST != 14 +#error "osf.S out of sync with ffi.h" +#endif + +#ifdef __ELF__ + .section .eh_frame,EH_FRAME_FLAGS,@progbits +__FRAME_BEGIN__: + .4byte $LECIE1-$LSCIE1 # Length of Common Information Entry +$LSCIE1: + .4byte 0x0 # CIE Identifier Tag + .byte 0x1 # CIE Version + .ascii "zR\0" # CIE Augmentation + .byte 0x1 # uleb128 0x1; CIE Code Alignment Factor + .byte 0x78 # sleb128 -8; CIE Data Alignment Factor + .byte 26 # CIE RA Column + .byte 0x1 # uleb128 0x1; Augmentation size + .byte 0x1b # FDE Encoding (pcrel sdata4) + .byte 0xc # DW_CFA_def_cfa + .byte 30 # uleb128 column 30 + .byte 0 # uleb128 offset 0 + .align 3 +$LECIE1: +$LSFDE1: + .4byte $LEFDE1-$LASFDE1 # FDE Length +$LASFDE1: + .4byte $LASFDE1-__FRAME_BEGIN__ # FDE CIE offset + .4byte $LFB1-. # FDE initial location + .4byte $LFE1-$LFB1 # FDE address range + .byte 0x0 # uleb128 0x0; Augmentation size + + .byte 0x4 # DW_CFA_advance_loc4 + .4byte $LCFI1-$LFB1 + .byte 0x9a # DW_CFA_offset, column 26 + .byte 4 # uleb128 4*-8 + .byte 0x8f # DW_CFA_offset, column 15 + .byte 0x3 # uleb128 3*-8 + .byte 0xc # DW_CFA_def_cfa + .byte 15 # uleb128 column 15 + .byte 32 # uleb128 offset 32 + + .byte 0x4 # DW_CFA_advance_loc4 + .4byte $LCFI2-$LCFI1 + .byte 0xda # DW_CFA_restore, column 26 + .align 3 +$LEFDE1: + +$LSFDE3: + .4byte $LEFDE3-$LASFDE3 # FDE Length +$LASFDE3: + .4byte $LASFDE3-__FRAME_BEGIN__ # FDE CIE offset + .4byte $LFB2-. # FDE initial location + .4byte $LFE2-$LFB2 # FDE address range + .byte 0x0 # uleb128 0x0; Augmentation size + + .byte 0x4 # DW_CFA_advance_loc4 + .4byte $LCFI5-$LFB2 + .byte 0xe # DW_CFA_def_cfa_offset + .byte 0x80,0x1 # uleb128 128 + + .byte 0x4 # DW_CFA_advance_loc4 + .4byte $LCFI6-$LCFI5 + .byte 0x9a # DW_CFA_offset, column 26 + .byte 16 # uleb128 offset 16*-8 + .align 3 +$LEFDE3: + +#ifdef __linux__ + .section .note.GNU-stack,"",@progbits +#endif +#endif diff --git a/toolkit/components/js-ctypes/src/libffi/src/arm/ffi.c b/toolkit/components/js-ctypes/src/libffi/src/arm/ffi.c new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/src/arm/ffi.c @@ -0,0 +1,309 @@ +/* ----------------------------------------------------------------------- + ffi.c - Copyright (c) 1998, 2008 Red Hat, Inc. + + ARM Foreign Function Interface + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + ``Software''), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + ----------------------------------------------------------------------- */ + +#include +#include + +#include + +/* ffi_prep_args is called by the assembly routine once stack space + has been allocated for the function's arguments */ + +void ffi_prep_args(char *stack, extended_cif *ecif) +{ + register unsigned int i; + register void **p_argv; + register char *argp; + register ffi_type **p_arg; + + argp = stack; + + if ( ecif->cif->flags == FFI_TYPE_STRUCT ) { + *(void **) argp = ecif->rvalue; + argp += 4; + } + + p_argv = ecif->avalue; + + for (i = ecif->cif->nargs, p_arg = ecif->cif->arg_types; + (i != 0); + i--, p_arg++) + { + size_t z; + + /* Align if necessary */ + if (((*p_arg)->alignment - 1) & (unsigned) argp) { + argp = (char *) ALIGN(argp, (*p_arg)->alignment); + } + + if ((*p_arg)->type == FFI_TYPE_STRUCT) + argp = (char *) ALIGN(argp, 4); + + z = (*p_arg)->size; + if (z < sizeof(int)) + { + z = sizeof(int); + switch ((*p_arg)->type) + { + case FFI_TYPE_SINT8: + *(signed int *) argp = (signed int)*(SINT8 *)(* p_argv); + break; + + case FFI_TYPE_UINT8: + *(unsigned int *) argp = (unsigned int)*(UINT8 *)(* p_argv); + break; + + case FFI_TYPE_SINT16: + *(signed int *) argp = (signed int)*(SINT16 *)(* p_argv); + break; + + case FFI_TYPE_UINT16: + *(unsigned int *) argp = (unsigned int)*(UINT16 *)(* p_argv); + break; + + case FFI_TYPE_STRUCT: + memcpy(argp, *p_argv, (*p_arg)->size); + break; + + default: + FFI_ASSERT(0); + } + } + else if (z == sizeof(int)) + { + *(unsigned int *) argp = (unsigned int)*(UINT32 *)(* p_argv); + } + else + { + memcpy(argp, *p_argv, z); + } + p_argv++; + argp += z; + } + + return; +} + +/* Perform machine dependent cif processing */ +ffi_status ffi_prep_cif_machdep(ffi_cif *cif) +{ + /* Round the stack up to a multiple of 8 bytes. This isn't needed + everywhere, but it is on some platforms, and it doesn't harm anything + when it isn't needed. */ + cif->bytes = (cif->bytes + 7) & ~7; + + /* Set the return type flag */ + switch (cif->rtype->type) + { + case FFI_TYPE_VOID: + case FFI_TYPE_FLOAT: + case FFI_TYPE_DOUBLE: + cif->flags = (unsigned) cif->rtype->type; + break; + + case FFI_TYPE_SINT64: + case FFI_TYPE_UINT64: + cif->flags = (unsigned) FFI_TYPE_SINT64; + break; + + case FFI_TYPE_STRUCT: + if (cif->rtype->size <= 4) + /* A Composite Type not larger than 4 bytes is returned in r0. */ + cif->flags = (unsigned)FFI_TYPE_INT; + else + /* A Composite Type larger than 4 bytes, or whose size cannot + be determined statically ... is stored in memory at an + address passed [in r0]. */ + cif->flags = (unsigned)FFI_TYPE_STRUCT; + break; + + default: + cif->flags = FFI_TYPE_INT; + break; + } + + return FFI_OK; +} + +extern void ffi_call_SYSV(void (*)(char *, extended_cif *), extended_cif *, + unsigned, unsigned, unsigned *, void (*fn)(void)); + +void ffi_call(ffi_cif *cif, void (*fn)(void), void *rvalue, void **avalue) +{ + extended_cif ecif; + + int small_struct = (cif->flags == FFI_TYPE_INT + && cif->rtype->type == FFI_TYPE_STRUCT); + + ecif.cif = cif; + ecif.avalue = avalue; + + unsigned int temp; + + /* If the return value is a struct and we don't have a return */ + /* value address then we need to make one */ + + if ((rvalue == NULL) && + (cif->flags == FFI_TYPE_STRUCT)) + { + ecif.rvalue = alloca(cif->rtype->size); + } + else if (small_struct) + ecif.rvalue = &temp; + else + ecif.rvalue = rvalue; + + switch (cif->abi) + { + case FFI_SYSV: + ffi_call_SYSV(ffi_prep_args, &ecif, cif->bytes, cif->flags, ecif.rvalue, + fn); + + break; + default: + FFI_ASSERT(0); + break; + } + if (small_struct) + memcpy (rvalue, &temp, cif->rtype->size); +} + +/** private members **/ + +static void ffi_prep_incoming_args_SYSV (char *stack, void **ret, + void** args, ffi_cif* cif); + +void ffi_closure_SYSV (ffi_closure *); + +/* This function is jumped to by the trampoline */ + +unsigned int +ffi_closure_SYSV_inner (closure, respp, args) + ffi_closure *closure; + void **respp; + void *args; +{ + // our various things... + ffi_cif *cif; + void **arg_area; + + cif = closure->cif; + arg_area = (void**) alloca (cif->nargs * sizeof (void*)); + + /* this call will initialize ARG_AREA, such that each + * element in that array points to the corresponding + * value on the stack; and if the function returns + * a structure, it will re-set RESP to point to the + * structure return address. */ + + ffi_prep_incoming_args_SYSV(args, respp, arg_area, cif); + + (closure->fun) (cif, *respp, arg_area, closure->user_data); + + return cif->flags; +} + +/*@-exportheader@*/ +static void +ffi_prep_incoming_args_SYSV(char *stack, void **rvalue, + void **avalue, ffi_cif *cif) +/*@=exportheader@*/ +{ + register unsigned int i; + register void **p_argv; + register char *argp; + register ffi_type **p_arg; + + argp = stack; + + if ( cif->flags == FFI_TYPE_STRUCT ) { + *rvalue = *(void **) argp; + argp += 4; + } + + p_argv = avalue; + + for (i = cif->nargs, p_arg = cif->arg_types; (i != 0); i--, p_arg++) + { + size_t z; + + size_t alignment = (*p_arg)->alignment; + if (alignment < 4) + alignment = 4; + /* Align if necessary */ + if ((alignment - 1) & (unsigned) argp) { + argp = (char *) ALIGN(argp, alignment); + } + + z = (*p_arg)->size; + + /* because we're little endian, this is what it turns into. */ + + *p_argv = (void*) argp; + + p_argv++; + argp += z; + } + + return; +} + +/* How to make a trampoline. */ + +#define FFI_INIT_TRAMPOLINE(TRAMP,FUN,CTX) \ +({ unsigned char *__tramp = (unsigned char*)(TRAMP); \ + unsigned int __fun = (unsigned int)(FUN); \ + unsigned int __ctx = (unsigned int)(CTX); \ + *(unsigned int*) &__tramp[0] = 0xe92d000f; /* stmfd sp!, {r0-r3} */ \ + *(unsigned int*) &__tramp[4] = 0xe59f0000; /* ldr r0, [pc] */ \ + *(unsigned int*) &__tramp[8] = 0xe59ff000; /* ldr pc, [pc] */ \ + *(unsigned int*) &__tramp[12] = __ctx; \ + *(unsigned int*) &__tramp[16] = __fun; \ + __clear_cache((&__tramp[0]), (&__tramp[19])); \ + }) + + +/* the cif must already be prep'ed */ + +ffi_status +ffi_prep_closure_loc (ffi_closure* closure, + ffi_cif* cif, + void (*fun)(ffi_cif*,void*,void**,void*), + void *user_data, + void *codeloc) +{ + FFI_ASSERT (cif->abi == FFI_SYSV); + + FFI_INIT_TRAMPOLINE (&closure->tramp[0], \ + &ffi_closure_SYSV, \ + codeloc); + + closure->cif = cif; + closure->user_data = user_data; + closure->fun = fun; + + return FFI_OK; +} diff --git a/toolkit/components/js-ctypes/src/libffi/src/arm/ffitarget.h b/toolkit/components/js-ctypes/src/libffi/src/arm/ffitarget.h new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/src/arm/ffitarget.h @@ -0,0 +1,49 @@ +/* -----------------------------------------------------------------*-C-*- + ffitarget.h - Copyright (c) 1996-2003 Red Hat, Inc. + Target configuration macros for ARM. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + ``Software''), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + + ----------------------------------------------------------------------- */ + +#ifndef LIBFFI_TARGET_H +#define LIBFFI_TARGET_H + +#ifndef LIBFFI_ASM +typedef unsigned long ffi_arg; +typedef signed long ffi_sarg; + +typedef enum ffi_abi { + FFI_FIRST_ABI = 0, + FFI_SYSV, + FFI_DEFAULT_ABI = FFI_SYSV, + FFI_LAST_ABI = FFI_DEFAULT_ABI + 1 +} ffi_abi; +#endif + +/* ---- Definitions for closures ----------------------------------------- */ + +#define FFI_CLOSURES 1 +#define FFI_TRAMPOLINE_SIZE 20 +#define FFI_NATIVE_RAW_API 0 + +#endif + diff --git a/toolkit/components/js-ctypes/src/libffi/src/arm/sysv.S b/toolkit/components/js-ctypes/src/libffi/src/arm/sysv.S new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/src/arm/sysv.S @@ -0,0 +1,299 @@ +/* ----------------------------------------------------------------------- + sysv.S - Copyright (c) 1998, 2008 Red Hat, Inc. + + ARM Foreign Function Interface + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + ``Software''), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + ----------------------------------------------------------------------- */ + +#define LIBFFI_ASM +#include +#include +#ifdef HAVE_MACHINE_ASM_H +#include +#else +#ifdef __USER_LABEL_PREFIX__ +#define CONCAT1(a, b) CONCAT2(a, b) +#define CONCAT2(a, b) a ## b + +/* Use the right prefix for global labels. */ +#define CNAME(x) CONCAT1 (__USER_LABEL_PREFIX__, x) +#else +#define CNAME(x) x +#endif +#define ENTRY(x) .globl CNAME(x); .type CNAME(x),%function; CNAME(x): +#endif + +#ifdef __ELF__ +#define LSYM(x) .x +#else +#define LSYM(x) x +#endif + +/* We need a better way of testing for this, but for now, this is all + we can do. */ +@ This selects the minimum architecture level required. +#define __ARM_ARCH__ 3 + +#if defined(__ARM_ARCH_4__) || defined(__ARM_ARCH_4T__) +# undef __ARM_ARCH__ +# define __ARM_ARCH__ 4 +#endif + +#if defined(__ARM_ARCH_5__) || defined(__ARM_ARCH_5T__) \ + || defined(__ARM_ARCH_5E__) || defined(__ARM_ARCH_5TE__) \ + || defined(__ARM_ARCH_5TEJ__) +# undef __ARM_ARCH__ +# define __ARM_ARCH__ 5 +#endif + +#if defined(__ARM_ARCH_6__) || defined(__ARM_ARCH_6J__) \ + || defined(__ARM_ARCH_6K__) || defined(__ARM_ARCH_6Z__) \ + || defined(__ARM_ARCH_6ZK__) +# undef __ARM_ARCH__ +# define __ARM_ARCH__ 6 +#endif + +#if __ARM_ARCH__ >= 5 +# define call_reg(x) blx x +#elif defined (__ARM_ARCH_4T__) +# define call_reg(x) mov lr, pc ; bx x +# if defined(__thumb__) || defined(__THUMB_INTERWORK__) +# define __INTERWORKING__ +# endif +#else +# define call_reg(x) mov lr, pc ; mov pc, x +#endif + +/* Conditionally compile unwinder directives. */ +#ifdef __ARM_EABI__ +#define UNWIND +#else +#define UNWIND @ +#endif + + +#if defined(__thumb__) && !defined(__THUMB_INTERWORK__) +.macro ARM_FUNC_START name + .text + .align 0 + .thumb + .thumb_func + ENTRY(\name) + bx pc + nop + .arm + UNWIND .fnstart +/* A hook to tell gdb that we've switched to ARM mode. Also used to call + directly from other local arm routines. */ +_L__\name: +.endm +#else +.macro ARM_FUNC_START name + .text + .align 0 + .arm + ENTRY(\name) + UNWIND .fnstart +.endm +#endif + +.macro RETLDM regs=, cond=, dirn=ia +#if defined (__INTERWORKING__) + .ifc "\regs","" + ldr\cond lr, [sp], #4 + .else + ldm\cond\dirn sp!, {\regs, lr} + .endif + bx\cond lr +#else + .ifc "\regs","" + ldr\cond pc, [sp], #4 + .else + ldm\cond\dirn sp!, {\regs, pc} + .endif +#endif +.endm + + + @ r0: ffi_prep_args + @ r1: &ecif + @ r2: cif->bytes + @ r3: fig->flags + @ sp+0: ecif.rvalue + @ sp+4: fn + + @ This assumes we are using gas. +ARM_FUNC_START ffi_call_SYSV + @ Save registers + stmfd sp!, {r0-r3, fp, lr} + UNWIND .save {r0-r3, fp, lr} + mov fp, sp + + UNWIND .setfp fp, sp + + @ Make room for all of the new args. + sub sp, fp, r2 + + @ Place all of the ffi_prep_args in position + mov ip, r0 + mov r0, sp + @ r1 already set + + @ Call ffi_prep_args(stack, &ecif) + call_reg(ip) + + @ move first 4 parameters in registers + ldmia sp, {r0-r3} + + @ and adjust stack + ldr ip, [fp, #8] + cmp ip, #16 + movhs ip, #16 + add sp, sp, ip + + @ call (fn) (...) + ldr ip, [fp, #28] + call_reg(ip) + + @ Remove the space we pushed for the args + mov sp, fp + + @ Load r2 with the pointer to storage for the return value + ldr r2, [sp, #24] + + @ Load r3 with the return type code + ldr r3, [sp, #12] + + @ If the return value pointer is NULL, assume no return value. + cmp r2, #0 + beq LSYM(Lepilogue) + +@ return INT + cmp r3, #FFI_TYPE_INT +#ifdef __SOFTFP__ + cmpne r3, #FFI_TYPE_FLOAT +#endif + streq r0, [r2] + beq LSYM(Lepilogue) + + @ return INT64 + cmp r3, #FFI_TYPE_SINT64 +#ifdef __SOFTFP__ + cmpne r3, #FFI_TYPE_DOUBLE +#endif + stmeqia r2, {r0, r1} + +#ifndef __SOFTFP__ + beq LSYM(Lepilogue) + +@ return FLOAT + cmp r3, #FFI_TYPE_FLOAT + stfeqs f0, [r2] + beq LSYM(Lepilogue) + +@ return DOUBLE or LONGDOUBLE + cmp r3, #FFI_TYPE_DOUBLE + stfeqd f0, [r2] +#endif + +LSYM(Lepilogue): + RETLDM "r0-r3,fp" + +.ffi_call_SYSV_end: + UNWIND .fnend + .size CNAME(ffi_call_SYSV),.ffi_call_SYSV_end-CNAME(ffi_call_SYSV) + +/* + unsigned int FFI_HIDDEN + ffi_closure_SYSV_inner (closure, respp, args) + ffi_closure *closure; + void **respp; + void *args; +*/ + +ARM_FUNC_START ffi_closure_SYSV + UNWIND .pad #16 + add ip, sp, #16 + stmfd sp!, {ip, lr} + UNWIND .save {r0, lr} + add r2, sp, #8 + .pad #16 + sub sp, sp, #16 + str sp, [sp, #8] + add r1, sp, #8 + bl ffi_closure_SYSV_inner + cmp r0, #FFI_TYPE_INT + beq .Lretint + + cmp r0, #FFI_TYPE_FLOAT +#ifdef __SOFTFP__ + beq .Lretint +#else + beq .Lretfloat +#endif + + cmp r0, #FFI_TYPE_DOUBLE +#ifdef __SOFTFP__ + beq .Lretlonglong +#else + beq .Lretdouble +#endif + + cmp r0, #FFI_TYPE_LONGDOUBLE +#ifdef __SOFTFP__ + beq .Lretlonglong +#else + beq .Lretlongdouble +#endif + + cmp r0, #FFI_TYPE_SINT64 + beq .Lretlonglong +.Lclosure_epilogue: + add sp, sp, #16 + ldmfd sp, {sp, pc} +.Lretint: + ldr r0, [sp] + b .Lclosure_epilogue +.Lretlonglong: + ldr r0, [sp] + ldr r1, [sp, #4] + b .Lclosure_epilogue + +#ifndef __SOFTFP__ +.Lretfloat: + ldfs f0, [sp] + b .Lclosure_epilogue +.Lretdouble: + ldfd f0, [sp] + b .Lclosure_epilogue +.Lretlongdouble: + ldfd f0, [sp] + b .Lclosure_epilogue +#endif + +.ffi_closure_SYSV_end: + UNWIND .fnend + .size CNAME(ffi_closure_SYSV),.ffi_closure_SYSV_end-CNAME(ffi_closure_SYSV) + +#if defined __ELF__ && defined __linux__ + .section .note.GNU-stack,"",%progbits +#endif diff --git a/toolkit/components/js-ctypes/src/libffi/src/closures.c b/toolkit/components/js-ctypes/src/libffi/src/closures.c new file mode 100644 --- /dev/null +++ b/toolkit/components/js-ctypes/src/libffi/src/closures.c @@ -0,0 +1,575 @@ +/* ----------------------------------------------------------------------- + closures.c - Copyright (c) 2007 Red Hat, Inc. + Copyright (C) 2007 Free Software Foundation, Inc + + Code to allocate and deallocate memory for closures. + + Permission is hereby granted, free of charge, to any person obtaining + a copy of this software and associated documentation files (the + ``Software''), to deal in the Software without restriction, including + without limitation the rights to use, copy, modify, merge, publish, + distribute, sublicense, and/or sell copies of the Software, and to + permit persons to whom the Software is furnished to do so, subject to + the following conditions: + + The above copyright notice and this permission notice shall be included + in all copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED ``AS IS'', WITHOUT WARRANTY OF ANY KIND, + EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + DEALINGS IN THE SOFTWARE. + ----------------------------------------------------------------------- */ + +#if defined __linux__ && !defined _GNU_SOURCE +#define _GNU_SOURCE 1 +#endif + +#include +#include + +#ifndef FFI_MMAP_EXEC_WRIT +# if __gnu_linux__ +/* This macro indicates it may be forbidden to map anonymous memory + with both write and execute permission. Code compiled when this + option is defined will attempt to map such pages once, but if it + fails, it falls back to creating a temporary file in a writable and + executable filesystem and mapping pages from it into separate + locations in the virtual memory space, one location writable and + another executable. */ +# define FFI_MMAP_EXEC_WRIT 1 +# endif +#endif + +#if FFI_MMAP_EXEC_WRIT && !defined FFI_MMAP_EXEC_SELINUX +# ifdef __linux__ +/* When defined to 1 check for SELinux and if SELinux is active, + don't attempt PROT_EXEC|PROT_WRITE mapping at all, as that + might cause audit messages. */ +# define FFI_MMAP_EXEC_SELINUX 1 +# endif +#endif + +#if FFI_CLOSURES + +# if FFI_MMAP_EXEC_WRIT + +#define USE_LOCKS 1 +#define USE_DL_PREFIX 1 +#define USE_BUILTIN_FFS 1 + +/* We need to use mmap, not sbrk. */ +#define HAVE_MORECORE 0 + +/* We could, in theory, support mremap, but it wouldn't buy us anything. */ +#define HAVE_MREMAP 0 + +/* We have no use for this, so save some code and data. */ +#define NO_MALLINFO 1 + +/* We need all allocations to be in regular segments, otherwise we + lose track of the corresponding code address. */ +#define DEFAULT_MMAP_THRESHOLD MAX_SIZE_T + +/* Don't allocate more than a page unless needed. */ +#define DEFAULT_GRANULARITY ((size_t)malloc_getpagesize) + +#if FFI_CLOSURE_TE