Arial
Wingdings
Monotype Sorts
Symbol
\\RMTSL1\CanoniR2
Letter
Canon
\SRGBCO~1.ICM
winspool
Text block with centered text. Use as a header/label for a section of a parts list, revisions block, or title block.
tle block.
Vis_TMH.chm!#24825 `7Copyright 2000 Visio Corporation. All rights reserved.
Textbox with field label on top and field below. Field automatically reflects foreground drawing's page number.
Vis_TMH.chm!#24833 `7Copyright 2000 Visio Corporation. All rights reserved.
0 = top-bottom, 1 = side-side
User.BoxType Height Height Label Above Label At Left `KConfigure the shape so that the label is above or to the left of the field.
Label At Left
`7Copyright 2000 Visio Corporation. All rights reserved.
0.####
Textbox with field label on top and field below. Field automatically reflects drawing's creation date.
Vis_TMH.chm!#24828 `7Copyright 2000 Visio Corporation. All rights reserved.
ddddd
Basic frame around drawing.
utomatically snaps to page size. Move corner control handles to limits of print margins.
Vis_TMH.chm!#24818 `7Copyright 2000 Visio Corporation. All rights reserved.
Resize Bottom/Left Margin
Resize Top/Right Margin
Rotating machine. Right-click to configure.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TICS.chm!#25704
Set Machine Configuration... Set machine configuration.
Machine Type Select the type of machine. Motor `qSynchronous Converter;Generator;Synchronous Generator;Motor;Motor Generator;Synchronous Motor;Hand Generator;None
Qualifier Select a qualifier. None None;AC;DC;Step
Enter device label. Label
M
Reposition Text
@
Represents a fuse.
Vis_TEFI.chm!#25567 `7Copyright 2000 Visio Corporation. All rights reserved.
Set to Alternative Form `5Select the other acceptable representation of a fuse.
Enter device value. Value
Variable
Relay contacts. Right-click for open or closed circuit.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TESR.chm!#25777
Actions.Action Open Circuit Close Circuit Open the circuit. Close the circuit.
Close Circuit
Close the circuit.
Connector Connector
This connector automatically routes between the shapes it connects.
Vis_SE.chm!#20000 `7Copyright 1999 Visio Corporation. All rights reserved.
Represents a relay coil.
ht mouse to select the required type of contact.
d contact.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TESR.chm!#25776
dfffff
Right-click to open or close on rising level.
on rising level.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TESR.chm!#25769
Actions.Action Open Circuit Close Circuit Open on rising level. Close on rising level.
Open Circuit
Open on rising level.
Right-click to open or close on rising temperature.
s on rising temperature.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TESR.chm!#25771
Actions.Action Open Circuit Close Circuit Open on rising temperature. Close on rising temperature.
Close on rising temperature.
Thermal element thermomechanical transducer.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TEFI.chm!#25591
Represents a chassis or frame ground connection.
Vis_TEFI.chm!#25559 `7Copyright 2000 Visio Corporation. All rights reserved.
Set to Alternative Form `8Select the other acceptable representation of a chassis.
Notations
Handle controls width of text box, height sizes with text.
paragraph width/word-wrap.
ragraph width.
graph width.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TMH.chm!#24701
Show Box Hide Box Show or hide box around text. Geometry2.NoShow
Show Box
Control handles vary section line lengths. Bottom arrow can be shown or hidden.
Vis_TMH.chm!#24712 `7Copyright 2000 Visio Corporation. All rights reserved.
Reposition Line End
Actions.Action Show Bottom Arrow Hide Bottom Arrow Show the bottom arrow. Hide the bottom arrow.
Hide Bottom Arrow
Hide the bottom arrow.
Transformer. Right-click to set properties.
UUUUUU
?TUUUUU
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TETW.chm!#25841
Core Select core type. Air-core;Magnetic-core Air-core
Adjustable `$Select adjustability characteristic. `.None;One winding;Both windings;Mutual inductor None
Set Transformer Properties... Set transformer properties.
Represents a ground connection.
Vis_TEFI.chm!#25557 `7Copyright 2000 Visio Corporation. All rights reserved.
Label Enter device label.
Circuit closing (make). Right-click for mushroom head, push-pull head.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TESR.chm!#25755
Scratch.A1 Normal Set to normal version.
Scratch.A1 Mushroom Head Set to mushroom head version.
Scratch.A1 Push-Pull Head Set to push-pull head version.
Represents a transducer.
Right mouse to select the required version.
Vis_TEFI.chm!#25575 `7Copyright 2000 Visio Corporation. All rights reserved.
Set to Negative Pulse
Negative pulse.
Height
Circuit opening (break). Right-click for mushroom head, push-pull head.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TESR.chm!#25756
Oval callout with adjustable oval size. Drag endpoints to aim callout.
ight.
o identify component.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TMH.chm!#24703
Resize Width
Resize Height
Box callout with adjustable box size. Drag endpoints to aim callout.
eight.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TMH.chm!#24704
Simple pneumatic or hydraulic pump/motor.
ional flow and rotation directions, displacement, and controls.
trols.
Vis_TFP.chm!#26089 `7Copyright 2000 Visio Corporation. All rights reserved.
Slide Pump/Motor
controls.x1 controls.x1
EndX
Pneumatic Hydraulic `$Select pneumatic or hydraulic fluid. Actions.Action
_Pump Select pump. User.Type
Motor Select motor. User.Type
Pump-motor Select pump-motor. User.Type
_Unidirectional _Bidirectional `!Select unidirectional pump/motor. ` Select bidirectional pump/motor. Actions.Action[5]
_Variable _Non-variable Select variable displacement. `!Select non-variable displacement. Actions.Action[6]
_Compensated _Non-compensated Select pressure compensated. ` Select non-pressure compensated. Actions.Action[7]
Pneumatic
_Variable
Select variable displacement.
_Compensated
Select pressure compensated.
_Bidirectional
Select bidirectional pump/motor.
Qps-8R
Q(-DT
1
Set Angle... `)Set variable arrow angle with centerline.
`%Input angle of arrow with centerline. Angle (degrees)
Hydraulic reservoir at atmospheric pressure, with return line below fluid level and air filter.
controls.
Vis_TFP.chm!#26107 `7Copyright 2000 Visio Corporation. All rights reserved.
Pressure relief or sequence valve.
re compensated or bypass flow control.
g air.
Vis_TFP.chm!#26194 `7Copyright 2000 Visio Corporation. All rights reserved.
Slide Pressure Relief
Variable Non-variable `,Select/deselect variabliity arrow on spring. actions.action
_With Drain _Without Drain Select/deselect external drain. actions.action[2]
_With Vent Port _Without Vent Port Select/deselect vent port. actions.action[3]
_With Drain
_With Vent Port
Left Arrow Select left arrow only. user.arrow
Right Arrow Select right arrow only. user.arrow
Both Arrows Select both arrows. user.arrow
pwwp
Drop this shape on the drawing page to run the Valve builder add-on. Shape will delete itself on drop.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TFP.chm!#26182
Cartridge valve.
alve.
educe exhaust noise.
sducer.
Vis_TFP.chm!#26193 `7Copyright 2000 Visio Corporation. All rights reserved.
width height
Shuttle valve or priority shuttle valve.
quick exhaust valve.
ow control.
Vis_TFP.chm!#26191 `7Copyright 2000 Visio Corporation. All rights reserved.
Slide Shuttle Valve
Shuttle Valve Priority Shuttle `/Select shuttle valve or priority shuttle valve. Actions.Action
Priority Shuttle
Box to create flow path.
Vis_TFP.chm!#26130 `7Copyright 2000 Visio Corporation. All rights reserved.
5 Port 2,3,4 Port `0Select 2,3,4 port flow path or 5 port flow path. Actions.Action
5 Port
Non-return valve.
alve, temperature compensated or bypass flow control.
Vis_TFP.chm!#26188 `7Copyright 2000 Visio Corporation. All rights reserved.
Slide Non-Return
Free Select free non-return valve. User.Valve
Spring Loaded `&Select spring-loaded non-return valve. User.Valve
Pilot Controlled `)Select pilot controlled non-return valve. User.Valve
Pilot Controlled (spring) `CSelect pilot controlled non-return valve opened with return spring. User.Valve
Four-port flow path.
ath.
Vis_TFP.chm!#26135 `7Copyright 2000 Visio Corporation. All rights reserved.
Pneumatic Hydraulic `$Select Pneumatic or hydraulic valve. Actions.Action
?KTv
2,3,4 Port
Double-acting pneumatic or hydraulic cylinder.
Vis_TFP.chm!#26096 `7Copyright 2000 Visio Corporation. All rights reserved.
Hydraulic Pneumatic `'Select pneumatic or hydraulic cylinder. Actions.Action
_Single Cushion Select single cushion. User.Cushion
Double Cushion Select double cushion. User.Cushion
No Cushion Select no cushion. User.Cushion
_Adjustable _Non-adjustable `-Select adjustable or non-adjustable cylinder. Actions.Action[5]
Slide Piston
Connect To Shape
` hfffff Connect To Shape
Controls.X1 Controls.X1
Controls.Y2
Controls.Y3
Hydraulic
_Adjustable
Q(-DT Q(-DTû Q(-DT
Energy storage device i.e. accumulator, gas loaded accumulator or auxiliary gas bottle.
nt, and controls.
Vis_TFP.chm!#26103 `7Copyright 2000 Visio Corporation. All rights reserved.
No Indication User.Type
Spring Loaded User.Type
Gas Loaded User.Type
Aux. Gas Bottle User.Type
0,75
Pressure switch, limit switch or analog transducer.
Vis_TFP.chm!#26119 `7Copyright 2000 Visio Corporation. All rights reserved.
controls.x1
Pressure Switch Select pressure switch. User.Type
Limit Switch Select limit switch. User.Type
Transducer Select analog transducer. User.Type
Datum target symbol. Press Return before/after to position text below/above centerline.
text.
nent.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TMH.chm!#24702
Resize Circle
Oval used to reference revisions and general notes on drawing.
ing.
Vis_TMH.chm!#24730 `7Copyright 2000 Visio Corporation. All rights reserved.
Represents a circuit breaker.
`7Copyright 2000 Visio Corporation. All rights reserved. Vis_TEFI.chm!#25566
Small D-type connector.
Vis_TETC.chm!#25822 `7Copyright 2000 Visio Corporation. All rights reserved.
C:\Program Files\Visio\Solutions\Annotation\Annotations.vss
C:\Program Files\Visio\Solutions\Electrical Engineering\EE - Fundamental Items.vss
C:\Program Files\Visio\Solutions\Electrical Engineering\EE - Switches and Relays.VSS
C:\Program Files\Visio\Solutions\Electrical Engineering\EE - Terminals and Connectors.VSS
C:\Program Files\Visio\Solutions\Fluid Power\Fluid Power - Equipment.VSS
C:\Program Files\Visio\Solutions\Fluid Power\Fluid Power - Valve Assembly.VSS
C:\Program Files\Visio\Solutions\Fluid Power\Fluid Power - Valves.VSS
Dimensions Dimensions
Magnetic-core
`9Copyright © 1997 Visio Corporation. All rights reserved.
`9Copyright © 1997 Visio Corporation. All rights reserved. Shape.hlp!#15000
Microsoft Excel Worksheet Biff8 Excel.Sheet.8 rdowning B "$"#,##0_);[Red]\("$"#,##0\) "$"#,##0.00_);[Red]\("$"#,##0.00\) Sheet1 Sheet2 Sheet3 ITEM QUANTITY PART NUMBER SUNSORCE PUMP BODY FOR ABOVE VALVE DESCRIPTION CP558-20-B-0% SAUER DANFOSS PRESSURE CONTROL VALVE DAMIN 2 POSITION DO3 MANIFOLD D1VW1CNYC PARKER DIRECTIONAL VALVE CPOM2DDV( PARKER DOUBLE PILOT OPREATED CHECK VALVE LADO3PO22S B08-2-A6T APBSNBA4Z BGECAFAI, WIKAI 0-5000 PSI 4-20 MA PRESSURE TRANSDUCER MbP?_ PRIV rdowning rdowning Microsoft Excel Rosenboom Machine & Tool, Inc. Sheet1 Sheet2 Sheet3 Worksheets Arial ITEM "System QUANTITY PART NUMBER
NANI MbP?_ MbP?_ Arial ITEM QUANTITY "System DESCRIPTION0 PART NUMBER0 SUNSORCE PUMP BGECAFAI SAUER DANFOSS PRESSURE CONTROL VALVE CP558-20-B-0 BODY FOR ABOVE VALVE B08-2-A6TR DAMIN 2 POSITION DO3 MANIFOLD LADO3PO22S PARKER DIRECTIONAL VALVE D1VW1CNYCS PARKER DOUBLE PILOT OPREATED CHECK VALVE0 CPOM2DDV WIKAI 0-5000 PSI 4-20 MA PRESSURE TRANSDUCERE APBSNBA4ZS NANI
Page-1
Connector
Block
Block label left
Section header
AntiScale
Page#
Yellow fill
BoxType
SizeFactor
Date
Frame
Rotating machine
SubType
SubType2
Label
TxtScale
Guide
Gesture Format
Fuse
Value
Relay contacts
Dynamic connector
Relay coils
SOLENOID COIL
Section header.6
SOLINOID COIL
Thermal element
Chassis
Relay contacts.33
Relay contacts.37
Transformer
CoreType
Adjustability
SOLINOID COIL.25
Pushbutton break
Oval callout
Ground
Pushbutton make
Transducer
Form
Box callout
Box callout.212
Fluid power
Hairline
Fluid flow
Pump/motor (simple)
CHLimit
Type
Disp
Comp
EE Normal
Dirn
Flow
Page-2
Liquid level actuated
Temperature actuated
VALVE DRIVER.41
Shuttle valve
Valve
Port
Non-return
Offset
PinX
Relay contacts.99
Small D connector
LimitHgt
Check
Hght
Factor
Angle
Vented reservoir
Pilot control
Pressure relief
Drain
Vent
Arrow
Valve builder
V_Drop
Cartridge valve
Non-return.45
4-port
DUBBLE BALL CHECK
Double- acting
Cushion
Adjust
CHLimit1
CHLimit2
XExt
Accumu- lator
Switch/ transducer
Circle callout
CircleRad
Reference oval
TextSize
Reference oval.153
Reference oval.154
Reference oval.155
Thermal element.46
Thermal element.49
Callout
Callout - straight
Black fill
Section 1
Frame.169
Pump/motor (simple).170
Vented reservoir.180
Dynamic connector.184
Dynamic connector.185
Cartridge valve.197
Dynamic connector.202
Dynamic connector.203
Dynamic connector.204
Dynamic connector.205
DUBBLE BALL CHECK.207
DUBBLE BALL CHECK.223
Double- acting .243
Double- acting .252
Double- acting .261
Double- acting .270
Accumu- lator.281
Accumu- lator.285
Dynamic connector.289
Dynamic connector.290
Dynamic connector.293
Dynamic connector.294
Dynamic connector.295
Dynamic connector.296
Switch/ transducer.297
Switch/ transducer.302
Dynamic connector.307
Dynamic connector.308
Circuit breaker
Reference oval.310
Reference oval.311
Reference oval.312
Reference oval.313
Reference oval.314
Reference oval.315
Reference oval.316
Reference oval.317
Reference oval.318
Circuit breaker.30
EE___Ind
ustrial_
Control_
Systems
9std
ole>
\WINDOWS
\SYSTEM\
STDOLE2.
TLB#
tomation#
Forms>
DD452EE1
608C4D0B
FM20.DLL
#Microso(ft
bject Li
brary/
C04E-4E1
4-BC2D-1
6DOCU@ME~1\D
I~1.ROS\@LOCALS@
emp\VBE\
U.exd =
ThisD
ocumentG
EE___Industrial_Control_Systems
ThisDocument
C:\PROGRA~1\COMMON~1\MICROS~1\VBA\VBA6\VBE6.DLL
C:\Program Files\Visio\VISLIB32.dll
Visio
C:\WINDOWS\SYSTEM\STDOLE2.TLB
stdole
C:\WINDOWS\system32\FM20.DLL
MSForms
C:\DOCUME~1\DDOWNI~1.ROS\LOCALS~1\Temp\VBE\MSForms.exd
Document
AddMenuItem
Document_DocumentCreated
Document_DocumentOpened
VBE6.DLL
docj
if t
usto
&Netlist GeneratorActi
Run netlist generator.
Netlist Generator.hlpr
Netlist Generator.exe
custUI.vsuD
&Tools
n an@
LocalizeBegin
&Netlist Generator
Netlist Generator.hlp
custUI.vsu
LocalizeEnd
Check each wizard first to see whether it can be found on the computerf
iAddonCount
Populate the arrays
Number of menu items to be added
addon is not available
Check if Document is in place
This checks if user has applied a custom UI file to the template and/or if a custom UI that is specific to Visio has been applied.3
Check if there are file custom menus
Check if there are Visio custom menus
Use the Built-in menus6
use the Visio custom menus
Use the file custom menus
Create menuset object for specified window context- (Drawing window menus)
Get the "Tools" menu from the Active Toolbar & if it does not exist, add it for this document.
Add menu items in menu8
Set the caption and mini help text
set the name of addon to run
Add the separator bar to menu(if Tools menu exists) after added Menu items.
Set the new c
ustom UI for the document
Attribut
e VB_Nam
e = "Thi
sDocumen
|Global
Spac
dCreat
Pred
ecla
BExpo
Templ
ateDeriv
Bustomi
2Optio
/licit`
Sub AddM
enuItem(0)
Di m vis
tsObj As
Visio.
untA/Inte
Karia
Hel8pFi
7N$st
rPath
DngJPUIo
abNoToolE
onWpb
szar
'Localiz`eBegi
onst MEN
U_CAPTIO
&Netl@
Generat
MPT!
Run *n
LP_FILE
.hlp
ADDO
N_SEP
exen
CUST_UI
UI.vs
(TOOLS
/End
)'Check
each wbX
fir
see whet
her it c
an be f
App@
Gs.Get
0 To UB
If ,UC
Next '
'Popu
'Numb
0ems
0adde
= Arr
ay()kH#(
s not av
taz#
cQ7s
has a
and/A1
that1
specific
hs Is
Nothing
Built-
Kset @
*win
(Dra0
GAtID(
"Su3YfP
Piolhbar
oe#Heq
,aIAu
f <P2s d
T@Xn
@^ mini
help t0
ItemCapt ion(i
<> ADDON
_SEP The
Menu
hObj
.MiniHel
p = var
Prompt
DFile
ContextI
M'se
t the na
me of ad
don to r
AddOnN
Wizard
"Args
"End
Nextn
eparatorP bar
if Tools
exist
aftDer
Eed
= Fahlse
S@WH<S
vew c
ustom UI
docu
ThisD5D
UIobj
Private*
d(ByVa
As V
isio.IV
Opene
Win16
Win32
VBA6
MSFormsC
ThisDocument<
_Evaluate
visMenuSetsObj
MenuSetsM
visMenuSetObj
MenuSet
visMenusObj
Menus!L
visMenuObj|
visMenuItemObjZ
MenuItemj
iItemCount
visMenuItemSep3
iMnuItems\>
varMenuItemCaption
varMenuItemPrompt
varMenuItemHelpFile
varMenuItemHelpID
varWizardNameW
varWizardArgs
strPathl
visUIobj3
UIObject
iMenucount
bNoTools
bAddonExists
szarrAddonNames
MENU_CAPTIONj
MENU_PROMPT
MENU_HELP_FILE
MENU_HELP_IDgF
ADDON_SEP
ADDON_NAME
CUST_UI_FILENAME
MENU_TOOLS}
Application
Addons
GetNames
UCase5
InPlace7
CustomMenus
BuiltInMenus
ItemAtID
visUIObjSetDrawing
Count0v
Item
Caption
MenuOK
AddAtCw
MenuItems
MiniHelp
HelpFile
HelpContextIDu"
AddOnName
AddOnArgs
SetCustomMenusl@
Document_DocumentCreatedQ
IVDocument
Documentj
DocumentCreated
DocumentOpened
_B_var_UCasea
ID="{0D73D60F-DC1A-11D0-A2FF-0020AFE8DE7F}"
Document=ThisDocument/&H00000000
Name="EE___Industrial_Control_Systems"
HelpContextID="0"
VersionCompatible32="393222000"
CMG="7D7F69A1A9D7ADD7ADD7ADD7AD"
DPB="AFADBBF3DF171018101810"
GC="E1E3F5F6F6F6F609"
[Host Extender Info]
&H00000001={3832D640-CF90-11CF-8E43-00A0C911005A};VBE;&H00000000
[Workspace]
ThisDocument=88, 88, 621, 455, Z