File: | home/maarten/src/libreoffice/core/include/rtl/ref.hxx |
Warning: | line 192, column 9 Use of memory after it is freed |
Press '?' to see keyboard shortcuts
Keyboard shortcuts:
1 | /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ | |||
2 | /* | |||
3 | * This file is part of the LibreOffice project. | |||
4 | * | |||
5 | * This Source Code Form is subject to the terms of the Mozilla Public | |||
6 | * License, v. 2.0. If a copy of the MPL was not distributed with this | |||
7 | * file, You can obtain one at http://mozilla.org/MPL/2.0/. | |||
8 | * | |||
9 | * This file incorporates work covered by the following license notice: | |||
10 | * | |||
11 | * Licensed to the Apache Software Foundation (ASF) under one or more | |||
12 | * contributor license agreements. See the NOTICE file distributed | |||
13 | * with this work for additional information regarding copyright | |||
14 | * ownership. The ASF licenses this file to you under the Apache | |||
15 | * License, Version 2.0 (the "License"); you may not use this file | |||
16 | * except in compliance with the License. You may obtain a copy of | |||
17 | * the License at http://www.apache.org/licenses/LICENSE-2.0 . | |||
18 | */ | |||
19 | ||||
20 | #include <memory> | |||
21 | #include <editeng/sizeitem.hxx> | |||
22 | #include <osl/file.hxx> | |||
23 | #include <tools/urlobj.hxx> | |||
24 | ||||
25 | #include <strings.hrc> | |||
26 | #include <svx/colorbox.hxx> | |||
27 | #include <svx/dlgctrl.hxx> | |||
28 | #include <svx/xlineit0.hxx> | |||
29 | #include <svx/xlinjoit.hxx> | |||
30 | #include <svx/xlncapit.hxx> | |||
31 | #include <svx/xlndsit.hxx> | |||
32 | #include <svx/xlnwtit.hxx> | |||
33 | #include <svx/xlnstwit.hxx> | |||
34 | #include <svx/xlnedwit.hxx> | |||
35 | #include <svx/xlnclit.hxx> | |||
36 | #include <svx/xlnstit.hxx> | |||
37 | #include <svx/xlnedit.hxx> | |||
38 | #include <svx/xlnstcit.hxx> | |||
39 | #include <svx/xlnedcit.hxx> | |||
40 | ||||
41 | ||||
42 | #include <svx/tabline.hxx> | |||
43 | #include <svx/xtable.hxx> | |||
44 | #include <svx/drawitem.hxx> | |||
45 | #include <cuitabline.hxx> | |||
46 | #include <dialmgr.hxx> | |||
47 | #include <svx/dlgutil.hxx> | |||
48 | #include <svx/svxgraphicitem.hxx> | |||
49 | #include <svx/ofaitem.hxx> | |||
50 | #include <svx/svdobj.hxx> | |||
51 | #include <svx/svdpage.hxx> | |||
52 | #include <svx/svdview.hxx> | |||
53 | #include <svx/svdmodel.hxx> | |||
54 | #include <svx/xlntrit.hxx> | |||
55 | #include <svx/xfltrit.hxx> | |||
56 | #include <editeng/numitem.hxx> | |||
57 | #include <editeng/brushitem.hxx> | |||
58 | #include <svx/gallery.hxx> | |||
59 | #include <sfx2/opengrf.hxx> | |||
60 | #include <svx/dialmgr.hxx> | |||
61 | #include <svx/svxids.hrc> | |||
62 | #include <svx/strings.hrc> | |||
63 | #include <cuitabarea.hxx> | |||
64 | #include <svtools/unitconv.hxx> | |||
65 | #include <comphelper/lok.hxx> | |||
66 | ||||
67 | #define MAX_BMP_WIDTH16 16 | |||
68 | #define MAX_BMP_HEIGHT16 16 | |||
69 | ||||
70 | using namespace com::sun::star; | |||
71 | ||||
72 | // static ---------------------------------------------------------------- | |||
73 | ||||
74 | const sal_uInt16 SvxLineTabPage::pLineRanges[] = | |||
75 | { | |||
76 | XATTR_LINETRANSPARENCE, | |||
77 | XATTR_LINETRANSPARENCE, | |||
78 | SID_ATTR_LINE_STYLE( 10000 + 169 ), | |||
79 | SID_ATTR_LINE_ENDCENTER( 10000 + 178 ), | |||
80 | 0 | |||
81 | }; | |||
82 | ||||
83 | SvxLineTabPage::SvxLineTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rInAttrs) | |||
84 | : SfxTabPage(pPage, pController, "cui/ui/linetabpage.ui", "LineTabPage", &rInAttrs) | |||
85 | , m_pSymbolList(nullptr) | |||
86 | , m_bNewSize(false) | |||
87 | , m_nSymbolType(SVX_SYMBOLTYPE_UNKNOWN(-100)) // unknown respectively unchanged | |||
88 | , m_pSymbolAttr(nullptr) | |||
89 | , m_bLastWidthModified(false) | |||
90 | , m_aSymbolLastSize(Size(0,0)) | |||
91 | , m_bSymbols(false) | |||
92 | , m_rOutAttrs(rInAttrs) | |||
93 | , m_bObjSelected(false) | |||
94 | , m_aXLineAttr(rInAttrs.GetPool()) | |||
95 | , m_rXLSet(m_aXLineAttr.GetItemSet()) | |||
96 | , m_pnLineEndListState(nullptr) | |||
97 | , m_pnDashListState(nullptr) | |||
98 | , m_pnColorListState(nullptr) | |||
99 | , m_nPageType(PageType::Area) | |||
100 | , m_nDlgType(0) | |||
101 | , m_pPosDashLb(nullptr) | |||
102 | , m_pPosLineEndLb(nullptr) | |||
103 | , m_xBoxColor(m_xBuilder->weld_widget("boxCOLOR")) | |||
104 | , m_xLbLineStyle(new SvxLineLB(m_xBuilder->weld_combo_box("LB_LINE_STYLE"))) | |||
105 | , m_xLbColor(new ColorListBox(m_xBuilder->weld_menu_button("LB_COLOR"), pController->getDialog())) | |||
106 | , m_xBoxWidth(m_xBuilder->weld_widget("boxWIDTH")) | |||
107 | , m_xMtrLineWidth(m_xBuilder->weld_metric_spin_button("MTR_FLD_LINE_WIDTH", FieldUnit::CM)) | |||
108 | , m_xBoxTransparency(m_xBuilder->weld_widget("boxTRANSPARENCY")) | |||
109 | , m_xMtrTransparent(m_xBuilder->weld_metric_spin_button("MTR_LINE_TRANSPARENT", FieldUnit::PERCENT)) | |||
110 | , m_xFlLineEnds(m_xBuilder->weld_widget("FL_LINE_ENDS")) | |||
111 | , m_xBoxArrowStyles(m_xBuilder->weld_widget("boxARROW_STYLES")) | |||
112 | , m_xLbStartStyle(new SvxLineEndLB(m_xBuilder->weld_combo_box("LB_START_STYLE"))) | |||
113 | , m_xBoxStart(m_xBuilder->weld_widget("boxSTART")) | |||
114 | , m_xMtrStartWidth(m_xBuilder->weld_metric_spin_button("MTR_FLD_START_WIDTH", FieldUnit::CM)) | |||
115 | , m_xTsbCenterStart(m_xBuilder->weld_check_button("TSB_CENTER_START")) | |||
116 | , m_xBoxEnd(m_xBuilder->weld_widget("boxEND")) | |||
117 | , m_xLbEndStyle(new SvxLineEndLB(m_xBuilder->weld_combo_box("LB_END_STYLE"))) | |||
118 | , m_xMtrEndWidth(m_xBuilder->weld_metric_spin_button("MTR_FLD_END_WIDTH", FieldUnit::CM)) | |||
119 | , m_xTsbCenterEnd(m_xBuilder->weld_check_button("TSB_CENTER_END")) | |||
120 | , m_xCbxSynchronize(m_xBuilder->weld_check_button("CBX_SYNCHRONIZE")) | |||
121 | , m_xCtlPreview(new weld::CustomWeld(*m_xBuilder, "CTL_PREVIEW", m_aCtlPreview)) | |||
122 | , m_xFLEdgeStyle(m_xBuilder->weld_widget("FL_EDGE_STYLE")) | |||
123 | , m_xGridEdgeCaps(m_xBuilder->weld_widget("gridEDGE_CAPS")) | |||
124 | , m_xLBEdgeStyle(m_xBuilder->weld_combo_box("LB_EDGE_STYLE")) | |||
125 | , m_xLBCapStyle(m_xBuilder->weld_combo_box("LB_CAP_STYLE")) // LineCaps | |||
126 | , m_xFlSymbol(m_xBuilder->weld_widget("FL_SYMBOL_FORMAT")) //#58425# Symbols on a line (e.g. StarChart) | |||
127 | , m_xGridIconSize(m_xBuilder->weld_widget("gridICON_SIZE")) | |||
128 | , m_xSymbolMB(m_xBuilder->weld_menu_button("MB_SYMBOL_BITMAP")) | |||
129 | , m_xSymbolWidthMF(m_xBuilder->weld_metric_spin_button("MF_SYMBOL_WIDTH", FieldUnit::CM)) | |||
130 | , m_xSymbolHeightMF(m_xBuilder->weld_metric_spin_button("MF_SYMBOL_HEIGHT", FieldUnit::CM)) | |||
131 | , m_xSymbolRatioCB(m_xBuilder->weld_check_button("CB_SYMBOL_RATIO")) | |||
132 | { | |||
133 | // This Page requires ExchangeSupport | |||
134 | SetExchangeSupport(); | |||
135 | ||||
136 | // Metric set | |||
137 | FieldUnit eFUnit = GetModuleFieldUnit( rInAttrs ); | |||
138 | ||||
139 | switch ( eFUnit ) | |||
140 | { | |||
141 | case FieldUnit::M: | |||
142 | case FieldUnit::KM: | |||
143 | eFUnit = FieldUnit::MM; | |||
144 | [[fallthrough]]; // we now have mm | |||
145 | case FieldUnit::MM: | |||
146 | m_xMtrLineWidth->set_increments(50, 500, FieldUnit::NONE); | |||
147 | m_xMtrStartWidth->set_increments(50, 500, FieldUnit::NONE); | |||
148 | m_xMtrEndWidth->set_increments(50, 500, FieldUnit::NONE); | |||
149 | break; | |||
150 | ||||
151 | case FieldUnit::INCH: | |||
152 | m_xMtrLineWidth->set_increments(2, 20, FieldUnit::NONE); | |||
153 | m_xMtrStartWidth->set_increments(2, 20, FieldUnit::NONE); | |||
154 | m_xMtrEndWidth->set_increments(2, 20, FieldUnit::NONE); | |||
155 | break; | |||
156 | default: ;// prevent warning | |||
157 | } | |||
158 | SetFieldUnit( *m_xMtrLineWidth, eFUnit ); | |||
159 | SetFieldUnit( *m_xMtrStartWidth, eFUnit ); | |||
160 | SetFieldUnit( *m_xMtrEndWidth, eFUnit ); | |||
161 | ||||
162 | // determine PoolUnit | |||
163 | SfxItemPool* pPool = m_rOutAttrs.GetPool(); | |||
164 | DBG_ASSERT( pPool, "Where is the pool?" )do { if (true && (!(pPool))) { sal_detail_logFormat(( SAL_DETAIL_LOG_LEVEL_WARN), ("legacy.tools"), ("/home/maarten/src/libreoffice/core/cui/source/tabpages/tpline.cxx" ":" "164" ": "), "%s", "Where is the pool?"); } } while (false ); | |||
165 | m_ePoolUnit = pPool->GetMetric( SID_ATTR_LINE_WIDTH( 10000 + 171 ) ); | |||
166 | ||||
167 | m_xLbLineStyle->connect_changed(LINK(this, SvxLineTabPage, ClickInvisibleHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubClickInvisibleHdl_Impl )); | |||
168 | m_xLbColor->SetSelectHdl( LINK( this, SvxLineTabPage, ChangePreviewListBoxHdl_Impl )::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangePreviewListBoxHdl_Impl ) ); | |||
169 | m_xMtrLineWidth->connect_value_changed(LINK(this, SvxLineTabPage, ChangePreviewModifyHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangePreviewModifyHdl_Impl )); | |||
170 | m_xMtrTransparent->connect_value_changed(LINK( this, SvxLineTabPage, ChangeTransparentHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangeTransparentHdl_Impl )); | |||
171 | ||||
172 | m_xLbStartStyle->connect_changed(LINK(this, SvxLineTabPage, ChangeStartListBoxHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangeStartListBoxHdl_Impl )); | |||
173 | m_xLbEndStyle->connect_changed(LINK(this, SvxLineTabPage, ChangeEndListBoxHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangeEndListBoxHdl_Impl )); | |||
174 | m_xMtrStartWidth->connect_value_changed(LINK(this, SvxLineTabPage, ChangeStartModifyHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangeStartModifyHdl_Impl )); | |||
175 | m_xMtrEndWidth->connect_value_changed(LINK( this, SvxLineTabPage, ChangeEndModifyHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangeEndModifyHdl_Impl )); | |||
176 | m_xTsbCenterStart->connect_clicked(LINK(this, SvxLineTabPage, ChangeStartClickHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangeStartClickHdl_Impl )); | |||
177 | m_xTsbCenterEnd->connect_clicked(LINK(this, SvxLineTabPage, ChangeEndClickHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangeEndClickHdl_Impl )); | |||
178 | ||||
179 | Link<weld::ComboBox&,void> aEdgeStyle = LINK(this, SvxLineTabPage, ChangeEdgeStyleHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangeEdgeStyleHdl_Impl ); | |||
180 | m_xLBEdgeStyle->connect_changed(aEdgeStyle); | |||
181 | ||||
182 | // LineCaps | |||
183 | Link<weld::ComboBox&,void> aCapStyle = LINK(this, SvxLineTabPage, ChangeCapStyleHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubChangeCapStyleHdl_Impl ); | |||
184 | m_xLBCapStyle->connect_changed(aCapStyle); | |||
185 | ||||
186 | // Symbols on a line (eg star charts), MB-handler set | |||
187 | m_xSymbolMB->connect_selected(LINK(this, SvxLineTabPage, GraphicHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubGraphicHdl_Impl)); | |||
188 | m_xSymbolMB->connect_toggled(LINK(this, SvxLineTabPage, MenuCreateHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubMenuCreateHdl_Impl )); | |||
189 | m_xSymbolWidthMF->connect_value_changed(LINK(this, SvxLineTabPage, SizeHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubSizeHdl_Impl)); | |||
190 | m_xSymbolHeightMF->connect_value_changed(LINK(this, SvxLineTabPage, SizeHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubSizeHdl_Impl)); | |||
191 | m_xSymbolRatioCB->connect_toggled(LINK(this, SvxLineTabPage, RatioHdl_Impl)::tools::detail::makeLink( ::tools::detail::castTo<SvxLineTabPage *>(this), &SvxLineTabPage::LinkStubRatioHdl_Impl)); | |||
192 | ||||
193 | m_xSymbolRatioCB->set_active(true); | |||
194 | ShowSymbolControls(false); | |||
195 | ||||
196 | m_nActLineWidth = -1; | |||
197 | } | |||
198 | ||||
199 | void SvxLineTabPage::ShowSymbolControls(bool bOn) | |||
200 | { | |||
201 | // Symbols on a line (e.g. StarCharts), symbol-enable controls | |||
202 | ||||
203 | m_bSymbols=bOn; | |||
204 | m_xFlSymbol->set_visible(bOn); | |||
205 | m_aCtlPreview.ShowSymbol(bOn); | |||
206 | } | |||
207 | ||||
208 | SvxLineTabPage::~SvxLineTabPage() | |||
209 | { | |||
210 | m_xCtlPreview.reset(); | |||
211 | m_xLbEndStyle.reset(); | |||
212 | m_xLbStartStyle.reset(); | |||
213 | m_xLbColor.reset(); | |||
214 | m_xLbLineStyle.reset(); | |||
215 | m_aGalleryBrushItems.clear(); | |||
216 | m_aSymbolBrushItems.clear(); | |||
217 | } | |||
218 | ||||
219 | void SvxLineTabPage::Construct() | |||
220 | { | |||
221 | FillListboxes(); | |||
222 | } | |||
223 | ||||
224 | void SvxLineTabPage::FillListboxes() | |||
225 | { | |||
226 | // Line styles | |||
227 | auto nOldSelect = m_xLbLineStyle->get_active(); | |||
228 | // aLbLineStyle.FillStyles(); | |||
229 | m_xLbLineStyle->Fill( m_pDashList ); | |||
230 | m_xLbLineStyle->set_active( nOldSelect ); | |||
231 | ||||
232 | // Line end style | |||
233 | OUString sNone( comphelper::LibreOfficeKit::isActive() ? SvxResId( RID_SVXSTR_INVISIBLEreinterpret_cast<char const *>("RID_SVXSTR_INVISIBLE" "\004" u8"None") ) | |||
234 | : SvxResId( RID_SVXSTR_NONEreinterpret_cast<char const *>("RID_SVXSTR_NONE" "\004" u8"- none -") ) ); | |||
235 | nOldSelect = m_xLbStartStyle->get_active(); | |||
236 | m_xLbStartStyle->clear(); | |||
237 | m_xLbStartStyle->append_text(sNone); | |||
238 | m_xLbStartStyle->Fill(m_pLineEndList); | |||
239 | m_xLbStartStyle->set_active(nOldSelect); | |||
240 | nOldSelect = m_xLbEndStyle->get_active(); | |||
241 | m_xLbEndStyle->clear(); | |||
242 | m_xLbEndStyle->append_text(sNone); | |||
243 | m_xLbEndStyle->Fill(m_pLineEndList, false); | |||
244 | m_xLbEndStyle->set_active(nOldSelect); | |||
245 | } | |||
246 | ||||
247 | void SvxLineTabPage::ActivatePage( const SfxItemSet& rSet ) | |||
248 | { | |||
249 | const CntUInt16Item* pPageTypeItem = rSet.GetItem<CntUInt16Item>(SID_PAGE_TYPE( 10000 + 1017 ), false); | |||
250 | if (pPageTypeItem) | |||
251 | SetPageType(static_cast<PageType>(pPageTypeItem->GetValue())); | |||
252 | if( m_nDlgType == 0 && m_pDashList.is() ) | |||
253 | { | |||
254 | sal_Int32 nPos; | |||
255 | sal_Int32 nCount; | |||
256 | ||||
257 | // Dash list | |||
258 | if( ( *m_pnDashListState & ChangeType::MODIFIED ) || | |||
259 | ( *m_pnDashListState & ChangeType::CHANGED ) ) | |||
260 | { | |||
261 | if( *m_pnDashListState & ChangeType::CHANGED ) | |||
262 | m_pDashList = static_cast<SvxLineTabDialog*>(GetDialogController() )->GetNewDashList(); | |||
263 | ||||
264 | *m_pnDashListState = ChangeType::NONE; | |||
265 | ||||
266 | // Style list | |||
267 | nPos = m_xLbLineStyle->get_active(); | |||
268 | ||||
269 | m_xLbLineStyle->clear(); | |||
270 | m_xLbLineStyle->append_text(SvxResId(RID_SVXSTR_INVISIBLEreinterpret_cast<char const *>("RID_SVXSTR_INVISIBLE" "\004" u8"None"))); | |||
271 | m_xLbLineStyle->append_text(SvxResId(RID_SVXSTR_SOLIDreinterpret_cast<char const *>("RID_SVXSTR_SOLID" "\004" u8"Continuous"))); | |||
272 | m_xLbLineStyle->Fill(m_pDashList); | |||
273 | nCount = m_xLbLineStyle->get_count(); | |||
274 | ||||
275 | if ( nCount == 0 ) | |||
276 | ; // This case should never occur | |||
277 | else if( nCount <= nPos ) | |||
278 | m_xLbLineStyle->set_active(0); | |||
279 | else | |||
280 | m_xLbLineStyle->set_active(nPos); | |||
281 | } | |||
282 | ||||
283 | INetURLObject aDashURL( m_pDashList->GetPath() ); | |||
284 | ||||
285 | aDashURL.Append( m_pDashList->GetName() ); | |||
286 | DBG_ASSERT( aDashURL.GetProtocol() != INetProtocol::NotValid, "invalid URL" )do { if (true && (!(aDashURL.GetProtocol() != INetProtocol ::NotValid))) { sal_detail_logFormat((SAL_DETAIL_LOG_LEVEL_WARN ), ("legacy.tools"), ("/home/maarten/src/libreoffice/core/cui/source/tabpages/tpline.cxx" ":" "286" ": "), "%s", "invalid URL"); } } while (false); | |||
287 | // LineEnd list | |||
288 | if( ( *m_pnLineEndListState & ChangeType::MODIFIED ) || ( *m_pnLineEndListState & ChangeType::CHANGED ) ) | |||
289 | { | |||
290 | if( *m_pnLineEndListState & ChangeType::CHANGED ) | |||
291 | m_pLineEndList = static_cast<SvxLineTabDialog*>(GetDialogController())->GetNewLineEndList(); | |||
292 | ||||
293 | *m_pnLineEndListState = ChangeType::NONE; | |||
294 | ||||
295 | nPos = m_xLbLineStyle->get_active(); | |||
296 | OUString sNone( comphelper::LibreOfficeKit::isActive() ? SvxResId( RID_SVXSTR_INVISIBLEreinterpret_cast<char const *>("RID_SVXSTR_INVISIBLE" "\004" u8"None") ) | |||
297 | : SvxResId( RID_SVXSTR_NONEreinterpret_cast<char const *>("RID_SVXSTR_NONE" "\004" u8"- none -") ) ); | |||
298 | ||||
299 | m_xLbStartStyle->clear(); | |||
300 | m_xLbStartStyle->append_text(sNone); | |||
301 | ||||
302 | m_xLbStartStyle->Fill( m_pLineEndList ); | |||
303 | nCount = m_xLbStartStyle->get_count(); | |||
304 | if( nCount == 0 ) | |||
305 | ; // This case should never occur | |||
306 | else if( nCount <= nPos ) | |||
307 | m_xLbStartStyle->set_active(0); | |||
308 | else | |||
309 | m_xLbStartStyle->set_active(nPos); | |||
310 | ||||
311 | m_xLbEndStyle->clear(); | |||
312 | m_xLbEndStyle->append_text(sNone); | |||
313 | ||||
314 | m_xLbEndStyle->Fill( m_pLineEndList, false ); | |||
315 | nCount = m_xLbEndStyle->get_count(); | |||
316 | ||||
317 | if( nCount == 0 ) | |||
318 | ; // This case should never occur | |||
319 | else if( nCount <= nPos ) | |||
320 | m_xLbEndStyle->set_active(0); | |||
321 | else | |||
322 | m_xLbEndStyle->set_active(nPos); | |||
323 | } | |||
324 | INetURLObject aLineURL( m_pLineEndList->GetPath() ); | |||
325 | ||||
326 | aLineURL.Append( m_pLineEndList->GetName() ); | |||
327 | DBG_ASSERT( aLineURL.GetProtocol() != INetProtocol::NotValid, "invalid URL" )do { if (true && (!(aLineURL.GetProtocol() != INetProtocol ::NotValid))) { sal_detail_logFormat((SAL_DETAIL_LOG_LEVEL_WARN ), ("legacy.tools"), ("/home/maarten/src/libreoffice/core/cui/source/tabpages/tpline.cxx" ":" "327" ": "), "%s", "invalid URL"); } } while (false); | |||
328 | // Evaluate if another TabPage set another fill type | |||
329 | if( m_xLbLineStyle->get_active() != 0 ) | |||
330 | { | |||
331 | if( m_nPageType == PageType::Hatch ) // 1 | |||
332 | { | |||
333 | m_xLbLineStyle->set_active(*m_pPosDashLb + 2); // +2 due to SOLID and INVISIBLE | |||
334 | ChangePreviewHdl_Impl( nullptr ); | |||
335 | } | |||
336 | if( m_nPageType == PageType::Bitmap ) | |||
337 | { | |||
338 | m_xLbStartStyle->set_active(*m_pPosLineEndLb + 1);// +1 due to SOLID | |||
339 | m_xLbEndStyle->set_active(*m_pPosLineEndLb + 1);// +1 due to SOLID | |||
340 | ChangePreviewHdl_Impl( nullptr ); | |||
341 | } | |||
342 | } | |||
343 | ||||
344 | // ColorList | |||
345 | if( *m_pnColorListState != ChangeType::NONE ) | |||
346 | { | |||
347 | ChangePreviewHdl_Impl( nullptr ); | |||
348 | } | |||
349 | ||||
350 | m_nPageType = PageType::Area; | |||
351 | } | |||
352 | // Page does not yet exist in the ctor, that's why we do it here! | |||
353 | ||||
354 | else if (m_nDlgType == 1101) // nNoArrowNoShadowDlg from chart2/source/controller/dialogs/dlg_ObjectProperties.cxx | |||
355 | { | |||
356 | m_xFlLineEnds->hide(); | |||
357 | m_xFLEdgeStyle->hide(); | |||
358 | } | |||
359 | } | |||
360 | ||||
361 | ||||
362 | DeactivateRC SvxLineTabPage::DeactivatePage( SfxItemSet* _pSet ) | |||
363 | { | |||
364 | if( m_nDlgType == 0 ) // Line dialog | |||
365 | { | |||
366 | m_nPageType = PageType::Gradient; // possibly for extensions | |||
367 | *m_pPosDashLb = m_xLbLineStyle->get_active() - 2;// First entry SOLID!!! | |||
368 | sal_Int32 nPos = m_xLbStartStyle->get_active(); | |||
369 | if (nPos != -1) | |||
370 | nPos--; | |||
371 | *m_pPosLineEndLb = nPos; | |||
372 | } | |||
373 | ||||
374 | if( _pSet ) | |||
375 | FillItemSet( _pSet ); | |||
376 | ||||
377 | return DeactivateRC::LeavePage; | |||
378 | } | |||
379 | ||||
380 | ||||
381 | bool SvxLineTabPage::FillItemSet( SfxItemSet* rAttrs ) | |||
382 | { | |||
383 | const SfxPoolItem* pOld = nullptr; | |||
384 | sal_Int32 nPos; | |||
385 | bool bModified = false; | |||
386 | ||||
387 | // To prevent modifications to the list, we do not set other page's items. | |||
388 | if( m_nDlgType != 0 || m_nPageType != PageType::Hatch ) | |||
389 | { | |||
390 | nPos = m_xLbLineStyle->get_active(); | |||
391 | if( nPos != -1 && | |||
392 | m_xLbLineStyle->get_value_changed_from_saved() ) | |||
393 | { | |||
394 | std::unique_ptr<XLineStyleItem> pStyleItem; | |||
395 | ||||
396 | if( nPos == 0 ) | |||
397 | pStyleItem.reset(new XLineStyleItem( drawing::LineStyle_NONE )); | |||
398 | else if( nPos == 1 ) | |||
399 | pStyleItem.reset(new XLineStyleItem( drawing::LineStyle_SOLID )); | |||
400 | else | |||
401 | { | |||
402 | pStyleItem.reset(new XLineStyleItem( drawing::LineStyle_DASH )); | |||
403 | ||||
404 | // For added security | |||
405 | if( m_pDashList->Count() > static_cast<long>( nPos - 2 ) ) | |||
406 | { | |||
407 | XLineDashItem aDashItem( m_xLbLineStyle->get_active_text(), | |||
408 | m_pDashList->GetDash( nPos - 2 )->GetDash() ); | |||
409 | pOld = GetOldItem( *rAttrs, XATTR_LINEDASH ); | |||
410 | if ( !pOld || !( *static_cast<const XLineDashItem*>(pOld) == aDashItem ) ) | |||
411 | { | |||
412 | rAttrs->Put( aDashItem ); | |||
413 | bModified = true; | |||
414 | } | |||
415 | } | |||
416 | } | |||
417 | pOld = GetOldItem( *rAttrs, XATTR_LINESTYLE ); | |||
418 | if ( !pOld || !( *static_cast<const XLineStyleItem*>(pOld) == *pStyleItem ) ) | |||
419 | { | |||
420 | rAttrs->Put( *pStyleItem ); | |||
421 | bModified = true; | |||
422 | } | |||
423 | } | |||
424 | } | |||
425 | // Line width | |||
426 | // GetSavedValue() returns OUString! | |||
427 | if( m_xMtrLineWidth->get_value_changed_from_saved() ) | |||
428 | { | |||
429 | XLineWidthItem aItem( GetCoreValue( *m_xMtrLineWidth, m_ePoolUnit ) ); | |||
430 | pOld = GetOldItem( *rAttrs, XATTR_LINEWIDTH ); | |||
431 | if ( !pOld || !( *static_cast<const XLineWidthItem*>(pOld) == aItem ) ) | |||
432 | { | |||
433 | rAttrs->Put( aItem ); | |||
434 | bModified = true; | |||
435 | } | |||
436 | } | |||
437 | // Width line start | |||
438 | if( m_xMtrStartWidth->get_value_changed_from_saved() ) | |||
439 | { | |||
440 | XLineStartWidthItem aItem( GetCoreValue( *m_xMtrStartWidth, m_ePoolUnit ) ); | |||
441 | pOld = GetOldItem( *rAttrs, XATTR_LINESTARTWIDTH ); | |||
442 | if ( !pOld || !( *static_cast<const XLineStartWidthItem*>(pOld) == aItem ) ) | |||
443 | { | |||
444 | rAttrs->Put( aItem ); | |||
445 | bModified = true; | |||
446 | } | |||
447 | } | |||
448 | // Width line end | |||
449 | if( m_xMtrEndWidth->get_value_changed_from_saved() ) | |||
450 | { | |||
451 | XLineEndWidthItem aItem( GetCoreValue( *m_xMtrEndWidth, m_ePoolUnit ) ); | |||
452 | pOld = GetOldItem( *rAttrs, XATTR_LINEENDWIDTH ); | |||
453 | if ( !pOld || !( *static_cast<const XLineEndWidthItem*>(pOld) == aItem ) ) | |||
454 | { | |||
455 | rAttrs->Put( aItem ); | |||
456 | bModified = true; | |||
457 | } | |||
458 | } | |||
459 | ||||
460 | // Line color | |||
461 | if (m_xLbColor->IsValueChangedFromSaved()) | |||
462 | { | |||
463 | NamedColor aColor = m_xLbColor->GetSelectedEntry(); | |||
464 | XLineColorItem aItem(aColor.second, aColor.first); | |||
465 | pOld = GetOldItem( *rAttrs, XATTR_LINECOLOR ); | |||
466 | if ( !pOld || !( *static_cast<const XLineColorItem*>(pOld) == aItem ) ) | |||
467 | { | |||
468 | rAttrs->Put( aItem ); | |||
469 | bModified = true; | |||
470 | } | |||
471 | } | |||
472 | ||||
473 | if( m_nDlgType != 0 || m_nPageType != PageType::Bitmap ) | |||
474 | { | |||
475 | // Line start | |||
476 | nPos = m_xLbStartStyle->get_active(); | |||
477 | if( nPos != -1 && m_xLbStartStyle->get_value_changed_from_saved() ) | |||
478 | { | |||
479 | std::unique_ptr<XLineStartItem> pItem; | |||
480 | if( nPos == 0 ) | |||
481 | pItem.reset(new XLineStartItem()); | |||
482 | else if( m_pLineEndList->Count() > static_cast<long>( nPos - 1 ) ) | |||
483 | pItem.reset(new XLineStartItem( m_xLbStartStyle->get_active_text(), m_pLineEndList->GetLineEnd( nPos - 1 )->GetLineEnd() )); | |||
484 | pOld = GetOldItem( *rAttrs, XATTR_LINESTART ); | |||
485 | if( pItem && ( !pOld || *pOld != *pItem ) ) | |||
486 | { | |||
487 | rAttrs->Put( *pItem ); | |||
488 | bModified = true; | |||
489 | } | |||
490 | } | |||
491 | // Line end | |||
492 | nPos = m_xLbEndStyle->get_active(); | |||
493 | if( nPos != -1 && m_xLbEndStyle->get_value_changed_from_saved() ) | |||
494 | { | |||
495 | std::unique_ptr<XLineEndItem> pItem; | |||
496 | if( nPos == 0 ) | |||
497 | pItem.reset(new XLineEndItem()); | |||
498 | else if( m_pLineEndList->Count() > static_cast<long>( nPos - 1 ) ) | |||
499 | pItem.reset(new XLineEndItem( m_xLbEndStyle->get_active_text(), m_pLineEndList->GetLineEnd( nPos - 1 )->GetLineEnd() )); | |||
500 | pOld = GetOldItem( *rAttrs, XATTR_LINEEND ); | |||
501 | if( pItem && | |||
502 | ( !pOld || !( *static_cast<const XLineEndItem*>(pOld) == *pItem ) ) ) | |||
503 | { | |||
504 | rAttrs->Put( *pItem ); | |||
505 | bModified = true; | |||
506 | } | |||
507 | } | |||
508 | } | |||
509 | ||||
510 | // Centered line end | |||
511 | TriState eState = m_xTsbCenterStart->get_state(); | |||
512 | if( m_xTsbCenterStart->get_state_changed_from_saved() ) | |||
513 | { | |||
514 | XLineStartCenterItem aItem( eState != TRISTATE_FALSE ); | |||
515 | pOld = GetOldItem( *rAttrs, XATTR_LINESTARTCENTER ); | |||
516 | if ( !pOld || !( *static_cast<const XLineStartCenterItem*>(pOld) == aItem ) ) | |||
517 | { | |||
518 | rAttrs->Put( aItem ); | |||
519 | bModified = true; | |||
520 | } | |||
521 | } | |||
522 | eState = m_xTsbCenterEnd->get_state(); | |||
523 | if( m_xTsbCenterEnd->get_state_changed_from_saved() ) | |||
524 | { | |||
525 | XLineEndCenterItem aItem( eState != TRISTATE_FALSE ); | |||
526 | pOld = GetOldItem( *rAttrs, XATTR_LINEENDCENTER ); | |||
527 | if ( !pOld || !( *static_cast<const XLineEndCenterItem*>(pOld) == aItem ) ) | |||
528 | { | |||
529 | rAttrs->Put( aItem ); | |||
530 | bModified = true; | |||
531 | } | |||
532 | } | |||
533 | ||||
534 | // Transparency | |||
535 | sal_uInt16 nVal = m_xMtrTransparent->get_value(FieldUnit::PERCENT); | |||
536 | if( m_xMtrTransparent->get_value_changed_from_saved() ) | |||
537 | { | |||
538 | XLineTransparenceItem aItem( nVal ); | |||
539 | pOld = GetOldItem( *rAttrs, XATTR_LINETRANSPARENCE ); | |||
540 | if ( !pOld || !( *static_cast<const XLineTransparenceItem*>(pOld) == aItem ) ) | |||
541 | { | |||
542 | rAttrs->Put( aItem ); | |||
543 | bModified = true; | |||
544 | } | |||
545 | } | |||
546 | ||||
547 | nPos = m_xLBEdgeStyle->get_active(); | |||
548 | if (nPos != -1 && m_xLBEdgeStyle->get_value_changed_from_saved()) | |||
549 | { | |||
550 | std::unique_ptr<XLineJointItem> pNew; | |||
551 | ||||
552 | switch(nPos) | |||
553 | { | |||
554 | case 0: // Rounded, default | |||
555 | { | |||
556 | pNew.reset(new XLineJointItem(css::drawing::LineJoint_ROUND)); | |||
557 | break; | |||
558 | } | |||
559 | case 1: // - none - | |||
560 | { | |||
561 | pNew.reset(new XLineJointItem(css::drawing::LineJoint_NONE)); | |||
562 | break; | |||
563 | } | |||
564 | case 2: // Miter | |||
565 | { | |||
566 | pNew.reset(new XLineJointItem(css::drawing::LineJoint_MITER)); | |||
567 | break; | |||
568 | } | |||
569 | case 3: // Bevel | |||
570 | { | |||
571 | pNew.reset(new XLineJointItem(css::drawing::LineJoint_BEVEL)); | |||
572 | break; | |||
573 | } | |||
574 | } | |||
575 | ||||
576 | if(pNew) | |||
577 | { | |||
578 | pOld = GetOldItem( *rAttrs, XATTR_LINEJOINT ); | |||
579 | ||||
580 | if(!pOld || !(*static_cast<const XLineJointItem*>(pOld) == *pNew)) | |||
581 | { | |||
582 | rAttrs->Put( *pNew ); | |||
583 | bModified = true; | |||
584 | } | |||
585 | } | |||
586 | } | |||
587 | ||||
588 | // LineCaps | |||
589 | nPos = m_xLBCapStyle->get_active(); | |||
590 | if (nPos != -1 && m_xLBCapStyle->get_value_changed_from_saved()) | |||
591 | { | |||
592 | std::unique_ptr<XLineCapItem> pNew; | |||
593 | ||||
594 | switch(nPos) | |||
595 | { | |||
596 | case 0: // Butt (=Flat), default | |||
597 | { | |||
598 | pNew.reset(new XLineCapItem(css::drawing::LineCap_BUTT)); | |||
599 | break; | |||
600 | } | |||
601 | case 1: // Round | |||
602 | { | |||
603 | pNew.reset(new XLineCapItem(css::drawing::LineCap_ROUND)); | |||
604 | break; | |||
605 | } | |||
606 | case 2: // Square | |||
607 | { | |||
608 | pNew.reset(new XLineCapItem(css::drawing::LineCap_SQUARE)); | |||
609 | break; | |||
610 | } | |||
611 | } | |||
612 | ||||
613 | if(pNew) | |||
614 | { | |||
615 | pOld = GetOldItem( *rAttrs, XATTR_LINECAP ); | |||
616 | ||||
617 | if(!pOld || !(*static_cast<const XLineCapItem*>(pOld) == *pNew)) | |||
618 | { | |||
619 | rAttrs->Put( *pNew ); | |||
620 | bModified = true; | |||
621 | } | |||
622 | } | |||
623 | } | |||
624 | ||||
625 | if(m_nSymbolType!=SVX_SYMBOLTYPE_UNKNOWN(-100) || m_bNewSize) | |||
626 | { | |||
627 | // Was set by selection or the size is different | |||
628 | SvxSizeItem aSItem(rAttrs->GetPool()->GetWhich(SID_ATTR_SYMBOLSIZE(27000 +116)),m_aSymbolSize); | |||
629 | const SfxPoolItem* pSOld = GetOldItem( *rAttrs, rAttrs->GetPool()->GetWhich(SID_ATTR_SYMBOLSIZE(27000 +116)) ); | |||
630 | m_bNewSize = pSOld ? *static_cast<const SvxSizeItem *>(pSOld) != aSItem : m_bNewSize ; | |||
631 | if(m_bNewSize) | |||
632 | { | |||
633 | rAttrs->Put(aSItem); | |||
634 | bModified=true; | |||
635 | } | |||
636 | ||||
637 | SfxInt32Item aTItem(rAttrs->GetPool()->GetWhich(SID_ATTR_SYMBOLTYPE(27000 +115)),m_nSymbolType); | |||
638 | const SfxPoolItem* pTOld = GetOldItem( *rAttrs, rAttrs->GetPool()->GetWhich(SID_ATTR_SYMBOLTYPE(27000 +115)) ); | |||
639 | bool bNewType = pTOld == nullptr || *static_cast<const SfxInt32Item*>(pTOld) != aTItem; | |||
640 | if(bNewType && m_nSymbolType==SVX_SYMBOLTYPE_UNKNOWN(-100)) | |||
641 | bNewType=false; // a small fix, type wasn't set -> don't create a type item after all! | |||
642 | if(bNewType) | |||
643 | { | |||
644 | rAttrs->Put(aTItem); | |||
645 | bModified=true; | |||
646 | } | |||
647 | ||||
648 | if(m_nSymbolType!=SVX_SYMBOLTYPE_NONE(-3)) | |||
649 | { | |||
650 | SvxBrushItem aBItem(m_aSymbolGraphic,GPOS_MM,rAttrs->GetPool()->GetWhich(SID_ATTR_BRUSH( 10000 + 1 ))); | |||
651 | const SfxPoolItem* pBOld = GetOldItem( *rAttrs, rAttrs->GetPool()->GetWhich(SID_ATTR_BRUSH( 10000 + 1 )) ); | |||
652 | bool bNewBrush = | |||
653 | pBOld == nullptr || *static_cast<const SvxBrushItem*>(pBOld) != aBItem; | |||
654 | if(bNewBrush) | |||
655 | { | |||
656 | rAttrs->Put(aBItem); | |||
657 | bModified=true; | |||
658 | } | |||
659 | } | |||
660 | } | |||
661 | rAttrs->Put (CntUInt16Item(SID_PAGE_TYPE( 10000 + 1017 ), static_cast<sal_uInt16>(m_nPageType))); | |||
662 | return bModified; | |||
663 | } | |||
664 | ||||
665 | ||||
666 | void SvxLineTabPage::FillXLSet_Impl() | |||
667 | { | |||
668 | sal_Int32 nPos; | |||
669 | ||||
670 | if (m_xLbLineStyle->get_active() == -1) | |||
671 | { | |||
672 | m_rXLSet.Put( XLineStyleItem( drawing::LineStyle_NONE ) ); | |||
673 | } | |||
674 | else if (m_xLbLineStyle->get_active() == 0) | |||
675 | m_rXLSet.Put( XLineStyleItem( drawing::LineStyle_NONE ) ); | |||
676 | else if (m_xLbLineStyle->get_active() == 1) | |||
677 | m_rXLSet.Put( XLineStyleItem( drawing::LineStyle_SOLID ) ); | |||
678 | else | |||
679 | { | |||
680 | m_rXLSet.Put( XLineStyleItem( drawing::LineStyle_DASH ) ); | |||
681 | ||||
682 | nPos = m_xLbLineStyle->get_active(); | |||
683 | if (nPos != -1) | |||
684 | { | |||
685 | m_rXLSet.Put( XLineDashItem( m_xLbLineStyle->get_active_text(), | |||
686 | m_pDashList->GetDash( nPos - 2 )->GetDash() ) ); | |||
687 | } | |||
688 | } | |||
689 | ||||
690 | nPos = m_xLbStartStyle->get_active(); | |||
691 | if (nPos != -1) | |||
692 | { | |||
693 | if( nPos == 0 ) | |||
694 | m_rXLSet.Put( XLineStartItem() ); | |||
695 | else | |||
696 | m_rXLSet.Put( XLineStartItem( m_xLbStartStyle->get_active_text(), | |||
697 | m_pLineEndList->GetLineEnd( nPos - 1 )->GetLineEnd() ) ); | |||
698 | } | |||
699 | nPos = m_xLbEndStyle->get_active(); | |||
700 | if (nPos != -1) | |||
701 | { | |||
702 | if( nPos == 0 ) | |||
703 | m_rXLSet.Put( XLineEndItem() ); | |||
704 | else | |||
705 | m_rXLSet.Put( XLineEndItem( m_xLbEndStyle->get_active_text(), | |||
706 | m_pLineEndList->GetLineEnd( nPos - 1 )->GetLineEnd() ) ); | |||
707 | } | |||
708 | ||||
709 | nPos = m_xLBEdgeStyle->get_active(); | |||
710 | if (nPos != -1) | |||
711 | { | |||
712 | switch(nPos) | |||
713 | { | |||
714 | case 0: // Rounded, default | |||
715 | { | |||
716 | m_rXLSet.Put(XLineJointItem(css::drawing::LineJoint_ROUND)); | |||
717 | break; | |||
718 | } | |||
719 | case 1: // - none - | |||
720 | { | |||
721 | m_rXLSet.Put(XLineJointItem(css::drawing::LineJoint_NONE)); | |||
722 | break; | |||
723 | } | |||
724 | case 2: // Miter | |||
725 | { | |||
726 | m_rXLSet.Put(XLineJointItem(css::drawing::LineJoint_MITER)); | |||
727 | break; | |||
728 | } | |||
729 | case 3: // Bevel | |||
730 | { | |||
731 | m_rXLSet.Put(XLineJointItem(css::drawing::LineJoint_BEVEL)); | |||
732 | break; | |||
733 | } | |||
734 | } | |||
735 | } | |||
736 | ||||
737 | // LineCaps | |||
738 | nPos = m_xLBCapStyle->get_active(); | |||
739 | if (nPos != -1) | |||
740 | { | |||
741 | switch(nPos) | |||
742 | { | |||
743 | case 0: // Butt (=Flat), default | |||
744 | { | |||
745 | m_rXLSet.Put(XLineCapItem(css::drawing::LineCap_BUTT)); | |||
746 | break; | |||
747 | } | |||
748 | case 1: // Round | |||
749 | { | |||
750 | m_rXLSet.Put(XLineCapItem(css::drawing::LineCap_ROUND)); | |||
751 | break; | |||
752 | } | |||
753 | case 2: // Square | |||
754 | { | |||
755 | m_rXLSet.Put(XLineCapItem(css::drawing::LineCap_SQUARE)); | |||
756 | break; | |||
757 | } | |||
758 | } | |||
759 | } | |||
760 | ||||
761 | m_rXLSet.Put( XLineStartWidthItem( GetCoreValue( *m_xMtrStartWidth, m_ePoolUnit ) ) ); | |||
762 | m_rXLSet.Put( XLineEndWidthItem( GetCoreValue( *m_xMtrEndWidth, m_ePoolUnit ) ) ); | |||
763 | ||||
764 | m_rXLSet.Put( XLineWidthItem( GetCoreValue( *m_xMtrLineWidth, m_ePoolUnit ) ) ); | |||
765 | NamedColor aColor = m_xLbColor->GetSelectedEntry(); | |||
766 | m_rXLSet.Put(XLineColorItem(aColor.second, aColor.first)); | |||
767 | ||||
768 | // Centered line end | |||
769 | if( m_xTsbCenterStart->get_state() == TRISTATE_TRUE ) | |||
770 | m_rXLSet.Put( XLineStartCenterItem( true ) ); | |||
771 | else if( m_xTsbCenterStart->get_state() == TRISTATE_FALSE ) | |||
772 | m_rXLSet.Put( XLineStartCenterItem( false ) ); | |||
773 | ||||
774 | if( m_xTsbCenterEnd->get_state() == TRISTATE_TRUE ) | |||
775 | m_rXLSet.Put( XLineEndCenterItem( true ) ); | |||
776 | else if( m_xTsbCenterEnd->get_state() == TRISTATE_FALSE ) | |||
777 | m_rXLSet.Put( XLineEndCenterItem( false ) ); | |||
778 | ||||
779 | // Transparency | |||
780 | sal_uInt16 nVal = m_xMtrTransparent->get_value(FieldUnit::PERCENT); | |||
781 | m_rXLSet.Put( XLineTransparenceItem( nVal ) ); | |||
782 | ||||
783 | m_aCtlPreview.SetLineAttributes(m_aXLineAttr.GetItemSet()); | |||
784 | } | |||
785 | ||||
786 | ||||
787 | void SvxLineTabPage::Reset( const SfxItemSet* rAttrs ) | |||
788 | { | |||
789 | drawing::LineStyle eXLS; // drawing::LineStyle_NONE, drawing::LineStyle_SOLID, drawing::LineStyle_DASH | |||
790 | ||||
791 | // Line style | |||
792 | const SfxPoolItem *pPoolItem; | |||
793 | long nSymType=SVX_SYMBOLTYPE_UNKNOWN(-100); | |||
794 | bool bPrevSym=false; | |||
795 | bool bEnable=true; | |||
796 | bool bIgnoreGraphic=false; | |||
797 | bool bIgnoreSize=false; | |||
798 | if(rAttrs->GetItemState(rAttrs->GetPool()->GetWhich(SID_ATTR_SYMBOLTYPE(27000 +115)),true,&pPoolItem) == SfxItemState::SET) | |||
799 | { | |||
800 | nSymType=static_cast<const SfxInt32Item *>(pPoolItem)->GetValue(); | |||
801 | } | |||
802 | ||||
803 | if(nSymType == SVX_SYMBOLTYPE_AUTO(-2)) | |||
804 | { | |||
805 | m_aSymbolGraphic=m_aAutoSymbolGraphic; | |||
806 | m_aSymbolSize=m_aSymbolLastSize=m_aAutoSymbolGraphic.GetPrefSize(); | |||
807 | bPrevSym=true; | |||
808 | } | |||
809 | else if(nSymType == SVX_SYMBOLTYPE_NONE(-3)) | |||
810 | { | |||
811 | bEnable=false; | |||
812 | bIgnoreGraphic=true; | |||
813 | bIgnoreSize=true; | |||
814 | } | |||
815 | else if(nSymType >= 0) | |||
816 | { | |||
817 | ScopedVclPtrInstance< VirtualDevice > pVDev; | |||
818 | pVDev->SetMapMode(MapMode(MapUnit::Map100thMM)); | |||
819 | ||||
820 | std::unique_ptr<SdrModel> pModel( | |||
821 | new SdrModel(nullptr, nullptr, true)); | |||
822 | pModel->GetItemPool().FreezeIdRanges(); | |||
823 | SdrPage* pPage = new SdrPage( *pModel, false ); | |||
824 | pPage->SetSize(Size(1000,1000)); | |||
825 | pModel->InsertPage( pPage, 0 ); | |||
826 | { | |||
827 | std::unique_ptr<SdrView> pView(new SdrView( *pModel, pVDev )); | |||
828 | pView->hideMarkHandles(); | |||
829 | pView->ShowSdrPage(pPage); | |||
830 | size_t nSymTmp = static_cast<size_t>(nSymType); | |||
831 | if(m_pSymbolList) | |||
832 | { | |||
833 | if(m_pSymbolList->GetObjCount()) | |||
834 | { | |||
835 | nSymTmp %= m_pSymbolList->GetObjCount(); // Treat list as cyclic! | |||
836 | SdrObject *pObj=m_pSymbolList->GetObj(nSymTmp); | |||
837 | if(pObj) | |||
838 | { | |||
839 | // directly clone to target SdrModel | |||
840 | pObj = pObj->CloneSdrObject(*pModel); | |||
841 | ||||
842 | if(m_pSymbolAttr) | |||
843 | { | |||
844 | pObj->SetMergedItemSet(*m_pSymbolAttr); | |||
845 | } | |||
846 | else | |||
847 | { | |||
848 | pObj->SetMergedItemSet(m_rOutAttrs); | |||
849 | } | |||
850 | ||||
851 | pPage->NbcInsertObject(pObj); | |||
852 | ||||
853 | // Generate invisible square to give all symbol types a | |||
854 | // bitmap size, which is independent from specific glyph | |||
855 | SdrObject* pInvisibleSquare(m_pSymbolList->GetObj(0)); | |||
856 | ||||
857 | // directly clone to target SdrModel | |||
858 | pInvisibleSquare = pInvisibleSquare->CloneSdrObject(*pModel); | |||
859 | ||||
860 | pPage->NbcInsertObject(pInvisibleSquare); | |||
861 | pInvisibleSquare->SetMergedItem(XFillTransparenceItem(100)); | |||
862 | pInvisibleSquare->SetMergedItem(XLineTransparenceItem(100)); | |||
863 | ||||
864 | pView->MarkAll(); | |||
865 | GDIMetaFile aMeta(pView->GetMarkedObjMetaFile()); | |||
866 | ||||
867 | m_aSymbolGraphic=Graphic(aMeta); | |||
868 | m_aSymbolSize=pObj->GetSnapRect().GetSize(); | |||
869 | m_aSymbolGraphic.SetPrefSize(pInvisibleSquare->GetSnapRect().GetSize()); | |||
870 | m_aSymbolGraphic.SetPrefMapMode(MapMode(MapUnit::Map100thMM)); | |||
871 | bPrevSym=true; | |||
872 | bEnable=true; | |||
873 | bIgnoreGraphic=true; | |||
874 | ||||
875 | pView->UnmarkAll(); | |||
876 | pInvisibleSquare=pPage->RemoveObject(1); | |||
877 | SdrObject::Free( pInvisibleSquare); | |||
878 | pObj=pPage->RemoveObject(0); | |||
879 | SdrObject::Free( pObj ); | |||
880 | } | |||
881 | } | |||
882 | } | |||
883 | } | |||
884 | } | |||
885 | if(rAttrs->GetItemState(rAttrs->GetPool()->GetWhich(SID_ATTR_BRUSH( 10000 + 1 )),true,&pPoolItem) == SfxItemState::SET) | |||
886 | { | |||
887 | const Graphic* pGraphic = static_cast<const SvxBrushItem *>(pPoolItem)->GetGraphic(); | |||
888 | if( pGraphic ) | |||
889 | { | |||
890 | if(!bIgnoreGraphic) | |||
891 | { | |||
892 | m_aSymbolGraphic=*pGraphic; | |||
893 | } | |||
894 | if(!bIgnoreSize) | |||
895 | { | |||
896 | m_aSymbolSize=OutputDevice::LogicToLogic( pGraphic->GetPrefSize(), | |||
897 | pGraphic->GetPrefMapMode(), | |||
898 | MapMode(MapUnit::Map100thMM)); | |||
899 | } | |||
900 | bPrevSym=true; | |||
901 | } | |||
902 | } | |||
903 | ||||
904 | if(rAttrs->GetItemState(rAttrs->GetPool()->GetWhich(SID_ATTR_SYMBOLSIZE(27000 +116)),true,&pPoolItem) == SfxItemState::SET) | |||
905 | { | |||
906 | m_aSymbolSize = static_cast<const SvxSizeItem *>(pPoolItem)->GetSize(); | |||
907 | } | |||
908 | ||||
909 | m_xGridIconSize->set_sensitive(bEnable); | |||
910 | ||||
911 | if(bPrevSym) | |||
912 | { | |||
913 | SetMetricValue(*m_xSymbolWidthMF, m_aSymbolSize.Width(), m_ePoolUnit); | |||
914 | SetMetricValue(*m_xSymbolHeightMF, m_aSymbolSize.Height(),m_ePoolUnit); | |||
915 | m_aCtlPreview.SetSymbol(&m_aSymbolGraphic,m_aSymbolSize); | |||
916 | m_aSymbolLastSize=m_aSymbolSize; | |||
917 | } | |||
918 | ||||
919 | if( rAttrs->GetItemState( XATTR_LINESTYLE ) != SfxItemState::DONTCARE ) | |||
920 | { | |||
921 | eXLS = rAttrs->Get( XATTR_LINESTYLE ).GetValue(); | |||
922 | ||||
923 | switch( eXLS ) | |||
924 | { | |||
925 | case drawing::LineStyle_NONE: | |||
926 | m_xLbLineStyle->set_active(0); | |||
927 | break; | |||
928 | case drawing::LineStyle_SOLID: | |||
929 | m_xLbLineStyle->set_active(1); | |||
930 | break; | |||
931 | ||||
932 | case drawing::LineStyle_DASH: | |||
933 | m_xLbLineStyle->set_active(-1); | |||
934 | m_xLbLineStyle->set_active_text(rAttrs->Get( XATTR_LINEDASH ).GetName()); | |||
935 | break; | |||
936 | ||||
937 | default: | |||
938 | break; | |||
939 | } | |||
940 | } | |||
941 | else | |||
942 | { | |||
943 | m_xLbLineStyle->set_active(-1); | |||
944 | } | |||
945 | ||||
946 | // Line strength | |||
947 | if( rAttrs->GetItemState( XATTR_LINEWIDTH ) != SfxItemState::DONTCARE ) | |||
948 | { | |||
949 | SetMetricValue( *m_xMtrLineWidth, rAttrs->Get( XATTR_LINEWIDTH ).GetValue(), m_ePoolUnit ); | |||
950 | } | |||
951 | else | |||
952 | m_xMtrLineWidth->set_text(""); | |||
953 | ||||
954 | // Line color | |||
955 | m_xLbColor->SetNoSelection(); | |||
956 | ||||
957 | if ( rAttrs->GetItemState( XATTR_LINECOLOR ) != SfxItemState::DONTCARE ) | |||
958 | { | |||
959 | Color aCol = rAttrs->Get( XATTR_LINECOLOR ).GetColorValue(); | |||
960 | m_xLbColor->SelectEntry( aCol ); | |||
961 | } | |||
962 | ||||
963 | // Line start | |||
964 | if( m_bObjSelected && rAttrs->GetItemState( XATTR_LINESTART ) == SfxItemState::DEFAULT ) | |||
965 | { | |||
966 | m_xLbStartStyle->set_sensitive(false); | |||
967 | } | |||
968 | else if( rAttrs->GetItemState( XATTR_LINESTART ) != SfxItemState::DONTCARE ) | |||
969 | { | |||
970 | // #86265# select entry using list and polygon, not string | |||
971 | bool bSelected(false); | |||
972 | const basegfx::B2DPolyPolygon& rItemPolygon = rAttrs->Get(XATTR_LINESTART).GetLineStartValue(); | |||
973 | ||||
974 | for(long a(0);!bSelected && a < m_pLineEndList->Count(); a++) | |||
975 | { | |||
976 | const XLineEndEntry* pEntry = m_pLineEndList->GetLineEnd(a); | |||
977 | const basegfx::B2DPolyPolygon& rEntryPolygon = pEntry->GetLineEnd(); | |||
978 | ||||
979 | if(rItemPolygon == rEntryPolygon) | |||
980 | { | |||
981 | // select this entry | |||
982 | m_xLbStartStyle->set_active(a + 1); | |||
983 | bSelected = true; | |||
984 | } | |||
985 | } | |||
986 | ||||
987 | if(!bSelected) | |||
988 | m_xLbStartStyle->set_active(0); | |||
989 | } | |||
990 | else | |||
991 | { | |||
992 | m_xLbStartStyle->set_active(-1); | |||
993 | } | |||
994 | ||||
995 | // Line end | |||
996 | if( m_bObjSelected && rAttrs->GetItemState( XATTR_LINEEND ) == SfxItemState::DEFAULT ) | |||
997 | { | |||
998 | m_xLbEndStyle->set_sensitive(false); | |||
999 | } | |||
1000 | else if( rAttrs->GetItemState( XATTR_LINEEND ) != SfxItemState::DONTCARE ) | |||
1001 | { | |||
1002 | // #86265# select entry using list and polygon, not string | |||
1003 | bool bSelected(false); | |||
1004 | const basegfx::B2DPolyPolygon& rItemPolygon = rAttrs->Get(XATTR_LINEEND).GetLineEndValue(); | |||
1005 | ||||
1006 | for(long a(0);!bSelected && a < m_pLineEndList->Count(); a++) | |||
1007 | { | |||
1008 | const XLineEndEntry* pEntry = m_pLineEndList->GetLineEnd(a); | |||
1009 | const basegfx::B2DPolyPolygon& rEntryPolygon = pEntry->GetLineEnd(); | |||
1010 | ||||
1011 | if(rItemPolygon == rEntryPolygon) | |||
1012 | { | |||
1013 | // select this entry | |||
1014 | m_xLbEndStyle->set_active(a + 1); | |||
1015 | bSelected = true; | |||
1016 | } | |||
1017 | } | |||
1018 | ||||
1019 | if(!bSelected) | |||
1020 | m_xLbEndStyle->set_active(0); | |||
1021 | } | |||
1022 | else | |||
1023 | { | |||
1024 | m_xLbEndStyle->set_active(-1); | |||
1025 | } | |||
1026 | ||||
1027 | // Line start strength | |||
1028 | if( m_bObjSelected && rAttrs->GetItemState( XATTR_LINESTARTWIDTH ) == SfxItemState::DEFAULT ) | |||
1029 | { | |||
1030 | m_xMtrStartWidth->set_sensitive(false); | |||
1031 | } | |||
1032 | else if( rAttrs->GetItemState( XATTR_LINESTARTWIDTH ) != SfxItemState::DONTCARE ) | |||
1033 | { | |||
1034 | SetMetricValue( *m_xMtrStartWidth, | |||
1035 | rAttrs->Get( XATTR_LINESTARTWIDTH ).GetValue(), | |||
1036 | m_ePoolUnit ); | |||
1037 | } | |||
1038 | else | |||
1039 | m_xMtrStartWidth->set_text( "" ); | |||
1040 | ||||
1041 | // Line end strength | |||
1042 | if( m_bObjSelected && rAttrs->GetItemState( XATTR_LINEENDWIDTH ) == SfxItemState::DEFAULT ) | |||
1043 | { | |||
1044 | m_xMtrEndWidth->set_sensitive(false); | |||
1045 | } | |||
1046 | else if( rAttrs->GetItemState( XATTR_LINEENDWIDTH ) != SfxItemState::DONTCARE ) | |||
1047 | { | |||
1048 | SetMetricValue( *m_xMtrEndWidth, | |||
1049 | rAttrs->Get( XATTR_LINEENDWIDTH ).GetValue(), | |||
1050 | m_ePoolUnit ); | |||
1051 | } | |||
1052 | else | |||
1053 | m_xMtrEndWidth->set_text(""); | |||
1054 | ||||
1055 | // Centered line end (start) | |||
1056 | if( m_bObjSelected && rAttrs->GetItemState( XATTR_LINESTARTCENTER ) == SfxItemState::DEFAULT ) | |||
1057 | { | |||
1058 | m_xTsbCenterStart->set_sensitive(false); | |||
1059 | } | |||
1060 | else if( rAttrs->GetItemState( XATTR_LINESTARTCENTER ) != SfxItemState::DONTCARE ) | |||
1061 | { | |||
1062 | if( rAttrs->Get( XATTR_LINESTARTCENTER ).GetValue() ) | |||
1063 | m_xTsbCenterStart->set_state(TRISTATE_TRUE); | |||
1064 | else | |||
1065 | m_xTsbCenterStart->set_state(TRISTATE_FALSE); | |||
1066 | } | |||
1067 | else | |||
1068 | { | |||
1069 | m_xTsbCenterStart->set_state(TRISTATE_INDET); | |||
1070 | } | |||
1071 | ||||
1072 | // Centered line end (end) | |||
1073 | if( m_bObjSelected && rAttrs->GetItemState( XATTR_LINEENDCENTER ) == SfxItemState::DEFAULT ) | |||
1074 | { | |||
1075 | m_xTsbCenterEnd->set_sensitive(false); | |||
1076 | } | |||
1077 | else if( rAttrs->GetItemState( XATTR_LINEENDCENTER ) != SfxItemState::DONTCARE ) | |||
1078 | { | |||
1079 | if( rAttrs->Get( XATTR_LINEENDCENTER ).GetValue() ) | |||
1080 | m_xTsbCenterEnd->set_state(TRISTATE_TRUE); | |||
1081 | else | |||
1082 | m_xTsbCenterEnd->set_state(TRISTATE_FALSE); | |||
1083 | } | |||
1084 | else | |||
1085 | { | |||
1086 | m_xTsbCenterEnd->set_state(TRISTATE_INDET); | |||
1087 | } | |||
1088 | ||||
1089 | // Transparency | |||
1090 | if( rAttrs->GetItemState( XATTR_LINETRANSPARENCE ) != SfxItemState::DONTCARE ) | |||
1091 | { | |||
1092 | sal_uInt16 nTransp = rAttrs->Get( XATTR_LINETRANSPARENCE ).GetValue(); | |||
1093 | m_xMtrTransparent->set_value(nTransp, FieldUnit::PERCENT); | |||
1094 | ChangeTransparentHdl_Impl(*m_xMtrTransparent); | |||
1095 | } | |||
1096 | else | |||
1097 | m_xMtrTransparent->set_text( "" ); | |||
1098 | ||||
1099 | if( !m_xLbStartStyle->get_sensitive() && | |||
1100 | !m_xLbEndStyle->get_sensitive() && | |||
1101 | !m_xMtrStartWidth->get_sensitive() && | |||
1102 | !m_xMtrEndWidth->get_sensitive() && | |||
1103 | !m_xTsbCenterStart->get_sensitive()&& | |||
1104 | !m_xTsbCenterEnd->get_sensitive() ) | |||
1105 | { | |||
1106 | m_xCbxSynchronize->set_sensitive(false); | |||
1107 | m_xFlLineEnds->set_sensitive(false); | |||
1108 | } | |||
1109 | ||||
1110 | // Synchronize | |||
1111 | // We get the value from the INI file now | |||
1112 | OUString aStr = GetUserData(); | |||
1113 | m_xCbxSynchronize->set_active(aStr.toInt32() != 0); | |||
1114 | ||||
1115 | if(m_bObjSelected && SfxItemState::DEFAULT == rAttrs->GetItemState(XATTR_LINEJOINT)) | |||
1116 | { | |||
1117 | // maFTEdgeStyle.set_sensitive(false); | |||
1118 | m_xLBEdgeStyle->set_sensitive(false); | |||
1119 | } | |||
1120 | else if(SfxItemState::DONTCARE != rAttrs->GetItemState(XATTR_LINEJOINT)) | |||
1121 | { | |||
1122 | const css::drawing::LineJoint eLineJoint = rAttrs->Get(XATTR_LINEJOINT).GetValue(); | |||
1123 | ||||
1124 | switch(eLineJoint) | |||
1125 | { | |||
1126 | case css::drawing::LineJoint::LineJoint_MAKE_FIXED_SIZE: // fallback to round, unused value | |||
1127 | case css::drawing::LineJoint_ROUND : m_xLBEdgeStyle->set_active(0); break; | |||
1128 | case css::drawing::LineJoint_NONE : m_xLBEdgeStyle->set_active(1); break; | |||
1129 | case css::drawing::LineJoint_MIDDLE : // fallback to mitre, unused value | |||
1130 | case css::drawing::LineJoint_MITER : m_xLBEdgeStyle->set_active(2); break; | |||
1131 | case css::drawing::LineJoint_BEVEL : m_xLBEdgeStyle->set_active(3); break; | |||
1132 | } | |||
1133 | } | |||
1134 | else | |||
1135 | { | |||
1136 | m_xLBEdgeStyle->set_active(-1); | |||
1137 | } | |||
1138 | ||||
1139 | // fdo#43209 | |||
1140 | if(m_bObjSelected && SfxItemState::DEFAULT == rAttrs->GetItemState(XATTR_LINECAP)) | |||
1141 | { | |||
1142 | m_xLBCapStyle->set_sensitive(false); | |||
1143 | } | |||
1144 | else if(SfxItemState::DONTCARE != rAttrs->GetItemState(XATTR_LINECAP)) | |||
1145 | { | |||
1146 | const css::drawing::LineCap eLineCap(rAttrs->Get(XATTR_LINECAP).GetValue()); | |||
1147 | ||||
1148 | switch(eLineCap) | |||
1149 | { | |||
1150 | case css::drawing::LineCap_ROUND: m_xLBCapStyle->set_active(1); break; | |||
1151 | case css::drawing::LineCap_SQUARE : m_xLBCapStyle->set_active(2); break; | |||
1152 | default /*css::drawing::LineCap_BUTT*/: m_xLBCapStyle->set_active(0); break; | |||
1153 | } | |||
1154 | } | |||
1155 | else | |||
1156 | { | |||
1157 | m_xLBCapStyle->set_active(-1); | |||
1158 | } | |||
1159 | ||||
1160 | // Save values | |||
1161 | m_xLbLineStyle->save_value(); | |||
1162 | m_xMtrLineWidth->save_value(); | |||
1163 | m_xLbColor->SaveValue(); | |||
1164 | m_xLbStartStyle->save_value(); | |||
1165 | m_xLbEndStyle->save_value(); | |||
1166 | m_xMtrStartWidth->save_value(); | |||
1167 | m_xMtrEndWidth->save_value(); | |||
1168 | m_xTsbCenterStart->save_state(); | |||
1169 | m_xTsbCenterEnd->save_state(); | |||
1170 | m_xMtrTransparent->save_value(); | |||
1171 | ||||
1172 | m_xLBEdgeStyle->save_value(); | |||
1173 | ||||
1174 | // LineCaps | |||
1175 | m_xLBCapStyle->save_value(); | |||
1176 | ||||
1177 | ClickInvisibleHdl_Impl(); | |||
1178 | ||||
1179 | ChangePreviewHdl_Impl( nullptr ); | |||
1180 | } | |||
1181 | ||||
1182 | std::unique_ptr<SfxTabPage> SvxLineTabPage::Create(weld::Container* pPage, weld::DialogController* pController, | |||
1183 | const SfxItemSet* rAttrs) | |||
1184 | { | |||
1185 | return std::make_unique<SvxLineTabPage>(pPage, pController, *rAttrs); | |||
1186 | } | |||
1187 | ||||
1188 | IMPL_LINK_NOARG(SvxLineTabPage, ChangePreviewListBoxHdl_Impl, ColorListBox&, void)void SvxLineTabPage::LinkStubChangePreviewListBoxHdl_Impl(void * instance, ColorListBox& data) { return static_cast< SvxLineTabPage *>(instance)->ChangePreviewListBoxHdl_Impl (data); } void SvxLineTabPage::ChangePreviewListBoxHdl_Impl(__attribute__ ((unused)) ColorListBox&) | |||
1189 | { | |||
1190 | ChangePreviewHdl_Impl(nullptr); | |||
1191 | } | |||
1192 | ||||
1193 | IMPL_LINK(SvxLineTabPage, ChangePreviewModifyHdl_Impl, weld::MetricSpinButton&, rEdit, void)void SvxLineTabPage::LinkStubChangePreviewModifyHdl_Impl(void * instance, weld::MetricSpinButton& data) { return static_cast <SvxLineTabPage *>(instance)->ChangePreviewModifyHdl_Impl (data); } void SvxLineTabPage::ChangePreviewModifyHdl_Impl(weld ::MetricSpinButton& rEdit) | |||
1194 | { | |||
1195 | ChangePreviewHdl_Impl(&rEdit); | |||
1196 | } | |||
1197 | ||||
1198 | void SvxLineTabPage::ChangePreviewHdl_Impl(const weld::MetricSpinButton* pCntrl) | |||
1199 | { | |||
1200 | if (pCntrl == m_xMtrLineWidth.get()) | |||
1201 | { | |||
1202 | // Line width and start end width | |||
1203 | sal_Int32 nNewLineWidth = GetCoreValue( *m_xMtrLineWidth, m_ePoolUnit ); | |||
1204 | if(m_nActLineWidth == -1) | |||
1205 | { | |||
1206 | // Don't initialize yet, get the start value | |||
1207 | const SfxPoolItem* pOld = GetOldItem( m_rXLSet, XATTR_LINEWIDTH ); | |||
1208 | sal_Int32 nStartLineWidth = 0; | |||
1209 | if(pOld) | |||
1210 | nStartLineWidth = static_cast<const XLineWidthItem *>(pOld)->GetValue(); | |||
1211 | m_nActLineWidth = nStartLineWidth; | |||
1212 | } | |||
1213 | ||||
1214 | if(m_nActLineWidth != nNewLineWidth) | |||
1215 | { | |||
1216 | // Adapt start/end width | |||
1217 | sal_Int32 nValAct = GetCoreValue( *m_xMtrStartWidth, m_ePoolUnit ); | |||
1218 | sal_Int32 nValNew = nValAct + (((nNewLineWidth - m_nActLineWidth) * 15) / 10); | |||
1219 | if(nValNew < 0) | |||
1220 | nValNew = 0; | |||
1221 | SetMetricValue( *m_xMtrStartWidth, nValNew, m_ePoolUnit ); | |||
1222 | ||||
1223 | nValAct = GetCoreValue( *m_xMtrEndWidth, m_ePoolUnit ); | |||
1224 | nValNew = nValAct + (((nNewLineWidth - m_nActLineWidth) * 15) / 10); | |||
1225 | if(nValNew < 0) | |||
1226 | nValNew = 0; | |||
1227 | SetMetricValue( *m_xMtrEndWidth, nValNew, m_ePoolUnit ); | |||
1228 | } | |||
1229 | ||||
1230 | // Remember current value | |||
1231 | m_nActLineWidth = nNewLineWidth; | |||
1232 | } | |||
1233 | ||||
1234 | FillXLSet_Impl(); | |||
1235 | m_aCtlPreview.Invalidate(); | |||
1236 | ||||
1237 | // Make transparency accessible accordingly | |||
1238 | if( m_xLbLineStyle->get_active() == 0 ) // invisible | |||
1239 | { | |||
1240 | m_xBoxTransparency->set_sensitive(false); | |||
1241 | } | |||
1242 | else | |||
1243 | { | |||
1244 | m_xBoxTransparency->set_sensitive(true); | |||
1245 | } | |||
1246 | ||||
1247 | const bool bHasLineStyle = m_xLbLineStyle->get_active() !=0; | |||
1248 | const bool bHasLineStart = m_xLbStartStyle->get_active() != 0; | |||
1249 | ||||
1250 | m_xBoxStart->set_sensitive(bHasLineStart && bHasLineStyle); | |||
1251 | ||||
1252 | const bool bHasLineEnd = m_xLbEndStyle->get_active() != 0; | |||
1253 | ||||
1254 | m_xBoxEnd->set_sensitive(bHasLineEnd && bHasLineStyle); | |||
1255 | } | |||
1256 | ||||
1257 | IMPL_LINK_NOARG(SvxLineTabPage, ChangeStartClickHdl_Impl, weld::Button&, void)void SvxLineTabPage::LinkStubChangeStartClickHdl_Impl(void * instance , weld::Button& data) { return static_cast<SvxLineTabPage *>(instance)->ChangeStartClickHdl_Impl(data); } void SvxLineTabPage ::ChangeStartClickHdl_Impl(__attribute__ ((unused)) weld::Button &) | |||
1258 | { | |||
1259 | if (m_xCbxSynchronize->get_active()) | |||
1260 | m_xTsbCenterEnd->set_state(m_xTsbCenterStart->get_state()); | |||
1261 | ChangePreviewHdl_Impl(nullptr); | |||
1262 | } | |||
1263 | ||||
1264 | IMPL_LINK_NOARG(SvxLineTabPage, ChangeStartListBoxHdl_Impl, weld::ComboBox&, void)void SvxLineTabPage::LinkStubChangeStartListBoxHdl_Impl(void * instance, weld::ComboBox& data) { return static_cast< SvxLineTabPage *>(instance)->ChangeStartListBoxHdl_Impl (data); } void SvxLineTabPage::ChangeStartListBoxHdl_Impl(__attribute__ ((unused)) weld::ComboBox&) | |||
1265 | { | |||
1266 | if (m_xCbxSynchronize->get_active()) | |||
1267 | m_xLbEndStyle->set_active(m_xLbStartStyle->get_active()); | |||
1268 | ||||
1269 | ChangePreviewHdl_Impl(nullptr); | |||
1270 | } | |||
1271 | ||||
1272 | IMPL_LINK_NOARG(SvxLineTabPage, ChangeStartModifyHdl_Impl, weld::MetricSpinButton&, void)void SvxLineTabPage::LinkStubChangeStartModifyHdl_Impl(void * instance, weld::MetricSpinButton& data) { return static_cast <SvxLineTabPage *>(instance)->ChangeStartModifyHdl_Impl (data); } void SvxLineTabPage::ChangeStartModifyHdl_Impl(__attribute__ ((unused)) weld::MetricSpinButton&) | |||
1273 | { | |||
1274 | if (m_xCbxSynchronize->get_active()) | |||
1275 | m_xMtrEndWidth->set_value(m_xMtrStartWidth->get_value(FieldUnit::NONE), FieldUnit::NONE); | |||
1276 | ||||
1277 | ChangePreviewHdl_Impl(nullptr); | |||
1278 | } | |||
1279 | ||||
1280 | IMPL_LINK_NOARG(SvxLineTabPage, ChangeEdgeStyleHdl_Impl, weld::ComboBox&, void)void SvxLineTabPage::LinkStubChangeEdgeStyleHdl_Impl(void * instance , weld::ComboBox& data) { return static_cast<SvxLineTabPage *>(instance)->ChangeEdgeStyleHdl_Impl(data); } void SvxLineTabPage ::ChangeEdgeStyleHdl_Impl(__attribute__ ((unused)) weld::ComboBox &) | |||
1281 | { | |||
1282 | ChangePreviewHdl_Impl( nullptr ); | |||
1283 | } | |||
1284 | ||||
1285 | // fdo#43209 | |||
1286 | IMPL_LINK_NOARG(SvxLineTabPage, ChangeCapStyleHdl_Impl, weld::ComboBox&, void)void SvxLineTabPage::LinkStubChangeCapStyleHdl_Impl(void * instance , weld::ComboBox& data) { return static_cast<SvxLineTabPage *>(instance)->ChangeCapStyleHdl_Impl(data); } void SvxLineTabPage ::ChangeCapStyleHdl_Impl(__attribute__ ((unused)) weld::ComboBox &) | |||
1287 | { | |||
1288 | ChangePreviewHdl_Impl( nullptr ); | |||
1289 | } | |||
1290 | ||||
1291 | IMPL_LINK_NOARG(SvxLineTabPage, ClickInvisibleHdl_Impl, weld::ComboBox&, void)void SvxLineTabPage::LinkStubClickInvisibleHdl_Impl(void * instance , weld::ComboBox& data) { return static_cast<SvxLineTabPage *>(instance)->ClickInvisibleHdl_Impl(data); } void SvxLineTabPage ::ClickInvisibleHdl_Impl(__attribute__ ((unused)) weld::ComboBox &) | |||
1292 | { | |||
1293 | ClickInvisibleHdl_Impl(); | |||
1294 | } | |||
1295 | ||||
1296 | void SvxLineTabPage::ClickInvisibleHdl_Impl() | |||
1297 | { | |||
1298 | if( m_xLbLineStyle->get_active() == 0 ) // invisible | |||
1299 | { | |||
1300 | if(!m_bSymbols) | |||
1301 | m_xBoxColor->set_sensitive(false); | |||
1302 | ||||
1303 | m_xBoxWidth->set_sensitive(false); | |||
1304 | ||||
1305 | if( m_xFlLineEnds->get_sensitive() ) | |||
1306 | { | |||
1307 | m_xBoxStart->set_sensitive(false); | |||
1308 | m_xBoxArrowStyles->set_sensitive(false); | |||
1309 | m_xGridEdgeCaps->set_sensitive(false); | |||
1310 | } | |||
1311 | } | |||
1312 | else | |||
1313 | { | |||
1314 | m_xBoxColor->set_sensitive(true); | |||
1315 | m_xBoxWidth->set_sensitive(true); | |||
1316 | ||||
1317 | if (m_xFlLineEnds->get_sensitive()) | |||
1318 | { | |||
1319 | m_xBoxArrowStyles->set_sensitive(true); | |||
1320 | m_xGridEdgeCaps->set_sensitive(true); | |||
1321 | } | |||
1322 | } | |||
1323 | ChangePreviewHdl_Impl( nullptr ); | |||
1324 | } | |||
1325 | ||||
1326 | IMPL_LINK_NOARG(SvxLineTabPage, ChangeEndClickHdl_Impl, weld::Button&, void)void SvxLineTabPage::LinkStubChangeEndClickHdl_Impl(void * instance , weld::Button& data) { return static_cast<SvxLineTabPage *>(instance)->ChangeEndClickHdl_Impl(data); } void SvxLineTabPage ::ChangeEndClickHdl_Impl(__attribute__ ((unused)) weld::Button &) | |||
1327 | { | |||
1328 | if (m_xCbxSynchronize->get_active()) | |||
1329 | m_xTsbCenterStart->set_state(m_xTsbCenterEnd->get_state()); | |||
1330 | ||||
1331 | ChangePreviewHdl_Impl(nullptr); | |||
1332 | } | |||
1333 | ||||
1334 | IMPL_LINK_NOARG(SvxLineTabPage, ChangeEndListBoxHdl_Impl, weld::ComboBox&, void)void SvxLineTabPage::LinkStubChangeEndListBoxHdl_Impl(void * instance , weld::ComboBox& data) { return static_cast<SvxLineTabPage *>(instance)->ChangeEndListBoxHdl_Impl(data); } void SvxLineTabPage ::ChangeEndListBoxHdl_Impl(__attribute__ ((unused)) weld::ComboBox &) | |||
1335 | { | |||
1336 | if (m_xCbxSynchronize->get_active()) | |||
1337 | m_xLbStartStyle->set_active(m_xLbEndStyle->get_active()); | |||
1338 | ||||
1339 | ChangePreviewHdl_Impl(nullptr); | |||
1340 | } | |||
1341 | ||||
1342 | IMPL_LINK_NOARG(SvxLineTabPage, ChangeEndModifyHdl_Impl, weld::MetricSpinButton&, void)void SvxLineTabPage::LinkStubChangeEndModifyHdl_Impl(void * instance , weld::MetricSpinButton& data) { return static_cast<SvxLineTabPage *>(instance)->ChangeEndModifyHdl_Impl(data); } void SvxLineTabPage ::ChangeEndModifyHdl_Impl(__attribute__ ((unused)) weld::MetricSpinButton &) | |||
1343 | { | |||
1344 | if (m_xCbxSynchronize->get_active()) | |||
1345 | m_xMtrStartWidth->set_value(m_xMtrEndWidth->get_value(FieldUnit::NONE), FieldUnit::NONE); | |||
1346 | ||||
1347 | ChangePreviewHdl_Impl(nullptr); | |||
1348 | } | |||
1349 | ||||
1350 | IMPL_LINK_NOARG(SvxLineTabPage, ChangeTransparentHdl_Impl, weld::MetricSpinButton&, void)void SvxLineTabPage::LinkStubChangeTransparentHdl_Impl(void * instance, weld::MetricSpinButton& data) { return static_cast <SvxLineTabPage *>(instance)->ChangeTransparentHdl_Impl (data); } void SvxLineTabPage::ChangeTransparentHdl_Impl(__attribute__ ((unused)) weld::MetricSpinButton&) | |||
1351 | { | |||
1352 | sal_uInt16 nVal = m_xMtrTransparent->get_value(FieldUnit::PERCENT); | |||
1353 | ||||
1354 | m_rXLSet.Put(XLineTransparenceItem(nVal)); | |||
1355 | ||||
1356 | FillXLSet_Impl(); | |||
1357 | ||||
1358 | m_aCtlPreview.Invalidate(); | |||
1359 | } | |||
1360 | ||||
1361 | void SvxLineTabPage::FillUserData() | |||
1362 | { | |||
1363 | // Write the synched value to the INI file | |||
1364 | OUString aStrUserData = OUString::boolean(m_xCbxSynchronize->get_active()); | |||
1365 | SetUserData( aStrUserData ); | |||
1366 | } | |||
1367 | ||||
1368 | // #58425# Symbols on a list (e.g. StarChart) | |||
1369 | // Handler for the symbol selection's popup menu (NumMenueButton) | |||
1370 | // The following link originates from SvxNumOptionsTabPage | |||
1371 | IMPL_LINK_NOARG(SvxLineTabPage, MenuCreateHdl_Impl, weld::ToggleButton&, void)void SvxLineTabPage::LinkStubMenuCreateHdl_Impl(void * instance , weld::ToggleButton& data) { return static_cast<SvxLineTabPage *>(instance)->MenuCreateHdl_Impl(data); } void SvxLineTabPage ::MenuCreateHdl_Impl(__attribute__ ((unused)) weld::ToggleButton &) | |||
| ||||
1372 | { | |||
1373 | ScopedVclPtrInstance< VirtualDevice > pVD; | |||
1374 | ||||
1375 | // Initialize popup | |||
1376 | if (!m_xGalleryMenu) | |||
1377 | { | |||
1378 | m_xGalleryMenu = m_xBuilder->weld_menu("gallerysubmenu"); | |||
1379 | weld::WaitObject aWait(GetFrameWeld()); | |||
1380 | // Get gallery entries | |||
1381 | GalleryExplorer::FillObjList(GALLERY_THEME_BULLETS3, m_aGrfNames); | |||
1382 | ||||
1383 | sal_uInt32 i = 0; | |||
1384 | for (auto const& grfName : m_aGrfNames) | |||
1385 | { | |||
1386 | const OUString *pUIName = &grfName; | |||
1387 | ||||
1388 | // Convert URL encodings to UI characters (e.g. %20 for spaces) | |||
1389 | OUString aPhysicalName; | |||
1390 | if (osl::FileBase::getSystemPathFromFileURL(grfName, aPhysicalName) | |||
1391 | == osl::FileBase::E_None) | |||
1392 | { | |||
1393 | pUIName = &aPhysicalName; | |||
1394 | } | |||
1395 | ||||
1396 | SvxBmpItemInfo* pInfo = new SvxBmpItemInfo; | |||
1397 | pInfo->pBrushItem.reset(new SvxBrushItem(grfName, "", GPOS_AREA, SID_ATTR_BRUSH( 10000 + 1 ))); | |||
1398 | pInfo->sItemId = "gallery" + OUString::number(i); | |||
1399 | m_aGalleryBrushItems.emplace_back(pInfo); | |||
1400 | const Graphic* pGraphic = pInfo->pBrushItem->GetGraphic(); | |||
1401 | ||||
1402 | if(pGraphic) | |||
1403 | { | |||
1404 | BitmapEx aBitmap(pGraphic->GetBitmapEx()); | |||
1405 | Size aSize(aBitmap.GetSizePixel()); | |||
1406 | if(aSize.Width() > MAX_BMP_WIDTH16 || aSize.Height() > MAX_BMP_HEIGHT16) | |||
1407 | { | |||
1408 | bool bWidth = aSize.Width() > aSize.Height(); | |||
1409 | double nScale = bWidth ? | |||
1410 | double(MAX_BMP_WIDTH16) / static_cast<double>(aSize.Width()): | |||
1411 | double(MAX_BMP_HEIGHT16) / static_cast<double>(aSize.Height()); | |||
1412 | aBitmap.Scale(nScale, nScale); | |||
1413 | ||||
1414 | } | |||
1415 | pVD->SetOutputSizePixel(aBitmap.GetSizePixel()); | |||
1416 | pVD->DrawBitmapEx(Point(), aBitmap); | |||
1417 | m_xGalleryMenu->append(pInfo->sItemId, *pUIName, *pVD); | |||
1418 | } | |||
1419 | else | |||
1420 | { | |||
1421 | m_xGalleryMenu->append(pInfo->sItemId, *pUIName); | |||
1422 | } | |||
1423 | ++i; | |||
1424 | } | |||
1425 | ||||
1426 | if (m_aGrfNames.empty()) | |||
1427 | m_xSymbolMB->set_item_sensitive("gallery", false); | |||
1428 | } | |||
1429 | ||||
1430 | if (m_xSymbolsMenu || !m_pSymbolList) | |||
1431 | return; | |||
1432 | ||||
1433 | m_xSymbolsMenu = m_xBuilder->weld_menu("symbolssubmenu"); | |||
1434 | ScopedVclPtrInstance< VirtualDevice > pVDev; | |||
1435 | pVDev->SetMapMode(MapMode(MapUnit::Map100thMM)); | |||
1436 | std::unique_ptr<SdrModel> pModel( | |||
1437 | new SdrModel(nullptr, nullptr, true)); | |||
1438 | pModel->GetItemPool().FreezeIdRanges(); | |||
1439 | // Page | |||
1440 | SdrPage* pPage = new SdrPage( *pModel, false ); | |||
1441 | pPage->SetSize(Size(1000,1000)); | |||
1442 | pModel->InsertPage( pPage, 0 ); | |||
1443 | { | |||
1444 | // 3D View | |||
1445 | std::unique_ptr<SdrView> pView(new SdrView( *pModel, pVDev )); | |||
1446 | pView->hideMarkHandles(); | |||
1447 | pView->ShowSdrPage(pPage); | |||
1448 | ||||
1449 | // Generate invisible square to give all symbols a | |||
1450 | // bitmap size, which is independent from specific glyph | |||
1451 | SdrObject *pInvisibleSquare=m_pSymbolList->GetObj(0); | |||
1452 | ||||
1453 | // directly clone to target SdrModel | |||
1454 | pInvisibleSquare = pInvisibleSquare->CloneSdrObject(*pModel); | |||
1455 | ||||
1456 | pPage->NbcInsertObject(pInvisibleSquare); | |||
1457 | pInvisibleSquare->SetMergedItem(XFillTransparenceItem(100)); | |||
1458 | pInvisibleSquare->SetMergedItem(XLineTransparenceItem(100)); | |||
1459 | ||||
1460 | for(size_t i=0; i < m_pSymbolList->GetObjCount(); ++i) | |||
1461 | { | |||
1462 | SdrObject *pObj=m_pSymbolList->GetObj(i); | |||
1463 | assert(pObj)(static_cast <bool> (pObj) ? void (0) : __assert_fail ( "pObj", "/home/maarten/src/libreoffice/core/cui/source/tabpages/tpline.cxx" , 1463, __extension__ __PRETTY_FUNCTION__)); | |||
1464 | ||||
1465 | // directly clone to target SdrModel | |||
1466 | pObj = pObj->CloneSdrObject(*pModel); | |||
1467 | ||||
1468 | m_aGrfNames.emplace_back(""); | |||
1469 | pPage->NbcInsertObject(pObj); | |||
1470 | if(m_pSymbolAttr) | |||
1471 | { | |||
1472 | pObj->SetMergedItemSet(*m_pSymbolAttr); | |||
1473 | } | |||
1474 | else | |||
1475 | { | |||
1476 | pObj->SetMergedItemSet(m_rOutAttrs); | |||
1477 | } | |||
1478 | pView->MarkAll(); | |||
1479 | BitmapEx aBitmapEx(pView->GetMarkedObjBitmapEx()); | |||
1480 | GDIMetaFile aMeta(pView->GetMarkedObjMetaFile()); | |||
1481 | pView->UnmarkAll(); | |||
1482 | pObj=pPage->RemoveObject(1); | |||
1483 | SdrObject::Free(pObj); | |||
1484 | ||||
1485 | SvxBmpItemInfo* pInfo = new SvxBmpItemInfo; | |||
1486 | pInfo->pBrushItem.reset(new SvxBrushItem(Graphic(aMeta), GPOS_AREA, SID_ATTR_BRUSH( 10000 + 1 ))); | |||
1487 | pInfo->sItemId = "symbol" + OUString::number(i); | |||
1488 | m_aSymbolBrushItems.emplace_back(pInfo); | |||
1489 | ||||
1490 | Size aSize(aBitmapEx.GetSizePixel()); | |||
1491 | if(aSize.Width() > MAX_BMP_WIDTH16 || aSize.Height() > MAX_BMP_HEIGHT16) | |||
1492 | { | |||
1493 | bool bWidth = aSize.Width() > aSize.Height(); | |||
1494 | double nScale = bWidth ? | |||
1495 | double(MAX_BMP_WIDTH16) / static_cast<double>(aSize.Width()): | |||
1496 | double(MAX_BMP_HEIGHT16) / static_cast<double>(aSize.Height()); | |||
1497 | aBitmapEx.Scale(nScale, nScale); | |||
1498 | } | |||
1499 | pVD->SetOutputSizePixel(aBitmapEx.GetSizePixel()); | |||
1500 | pVD->DrawBitmapEx(Point(), aBitmapEx); | |||
1501 | m_xSymbolsMenu->append(pInfo->sItemId, "", *pVD); | |||
1502 | } | |||
1503 | pInvisibleSquare=pPage->RemoveObject(0); | |||
1504 | SdrObject::Free(pInvisibleSquare); | |||
1505 | ||||
1506 | if (m_aGrfNames.empty()) | |||
1507 | m_xSymbolMB->set_item_sensitive("symbols", false); | |||
1508 | } | |||
1509 | } | |||
1510 | ||||
1511 | // #58425# Symbols on a list (e.g. StarChart) | |||
1512 | // Handler for menu button | |||
1513 | IMPL_LINK(SvxLineTabPage, GraphicHdl_Impl, const OString&, rIdent, void)void SvxLineTabPage::LinkStubGraphicHdl_Impl(void * instance, const OString& data) { return static_cast<SvxLineTabPage *>(instance)->GraphicHdl_Impl(data); } void SvxLineTabPage ::GraphicHdl_Impl(const OString& rIdent) | |||
1514 | { | |||
1515 | const Graphic* pGraphic = nullptr; | |||
1516 | Graphic aGraphic; | |||
1517 | bool bResetSize = false; | |||
1518 | bool bEnable = true; | |||
1519 | long nPreviousSymbolType = m_nSymbolType; | |||
1520 | ||||
1521 | OString sNumber; | |||
1522 | if (rIdent.startsWith("gallery", &sNumber)) | |||
1523 | { | |||
1524 | SvxBmpItemInfo* pInfo = m_aGalleryBrushItems[sNumber.toUInt32()].get(); | |||
1525 | pGraphic = pInfo->pBrushItem->GetGraphic(); | |||
1526 | m_nSymbolType = SVX_SYMBOLTYPE_BRUSHITEM(-1); | |||
1527 | } | |||
1528 | else if (rIdent.startsWith("symbol", &sNumber)) | |||
1529 | { | |||
1530 | m_nSymbolType = sNumber.toUInt32(); | |||
1531 | SvxBmpItemInfo* pInfo = m_aSymbolBrushItems[m_nSymbolType].get(); | |||
1532 | pGraphic = pInfo->pBrushItem->GetGraphic(); | |||
1533 | } | |||
1534 | else if (rIdent == "automatic") | |||
1535 | { | |||
1536 | pGraphic=&m_aAutoSymbolGraphic; | |||
1537 | m_aAutoSymbolGraphic.SetPrefSize( Size(253,253) ); | |||
1538 | m_nSymbolType=SVX_SYMBOLTYPE_AUTO(-2); | |||
1539 | } | |||
1540 | else if (rIdent == "none") | |||
1541 | { | |||
1542 | m_nSymbolType=SVX_SYMBOLTYPE_NONE(-3); | |||
1543 | pGraphic=nullptr; | |||
1544 | bEnable = false; | |||
1545 | } | |||
1546 | else if (rIdent == "file") | |||
1547 | { | |||
1548 | SvxOpenGraphicDialog aGrfDlg(CuiResId(RID_SVXSTR_EDIT_GRAPHICreinterpret_cast<char const *>("RID_SVXSTR_EDIT_GRAPHIC" "\004" u8"Link")), GetFrameWeld()); | |||
1549 | aGrfDlg.EnableLink(false); | |||
1550 | aGrfDlg.AsLink(false); | |||
1551 | if( !aGrfDlg.Execute() ) | |||
1552 | { | |||
1553 | // Remember selected filters | |||
1554 | if( !aGrfDlg.GetGraphic(aGraphic) ) | |||
1555 | { | |||
1556 | m_nSymbolType=SVX_SYMBOLTYPE_BRUSHITEM(-1); | |||
1557 | pGraphic = &aGraphic; | |||
1558 | bResetSize = true; | |||
1559 | } | |||
1560 | } | |||
1561 | if( !pGraphic ) | |||
1562 | return; | |||
1563 | } | |||
1564 | ||||
1565 | if (pGraphic) | |||
1566 | { | |||
1567 | Size aSize = SvxNumberFormat::GetGraphicSizeMM100(pGraphic); | |||
1568 | aSize = OutputDevice::LogicToLogic(aSize, MapMode(MapUnit::Map100thMM), MapMode(m_ePoolUnit)); | |||
1569 | m_aSymbolGraphic=*pGraphic; | |||
1570 | if( bResetSize ) | |||
1571 | { | |||
1572 | m_aSymbolSize=aSize; | |||
1573 | } | |||
1574 | else if( nPreviousSymbolType == SVX_SYMBOLTYPE_BRUSHITEM(-1) ) | |||
1575 | { //#i31097# Data Point Symbol size changes when a different symbol is chosen(maoyg) | |||
1576 | if( m_aSymbolSize.Width() != m_aSymbolSize.Height() ) | |||
1577 | { | |||
1578 | aSize.setWidth( static_cast<long>( m_aSymbolSize.Width() + m_aSymbolSize.Height() )/2 ); | |||
1579 | aSize.setHeight( static_cast<long>( m_aSymbolSize.Width() + m_aSymbolSize.Height() )/2 ); | |||
1580 | m_aSymbolSize = aSize; | |||
1581 | } | |||
1582 | } | |||
1583 | m_aCtlPreview.SetSymbol(&m_aSymbolGraphic,m_aSymbolSize); | |||
1584 | } | |||
1585 | else | |||
1586 | { | |||
1587 | m_aSymbolGraphic=Graphic(); | |||
1588 | m_aCtlPreview.SetSymbol(nullptr,m_aSymbolSize); | |||
1589 | bEnable = false; | |||
1590 | } | |||
1591 | m_aSymbolLastSize=m_aSymbolSize; | |||
1592 | SetMetricValue(*m_xSymbolWidthMF, m_aSymbolSize.Width(), m_ePoolUnit); | |||
1593 | SetMetricValue(*m_xSymbolHeightMF, m_aSymbolSize.Height(), m_ePoolUnit); | |||
1594 | ||||
1595 | m_xGridIconSize->set_sensitive(bEnable); | |||
1596 | m_aCtlPreview.Invalidate(); | |||
1597 | } | |||
1598 | ||||
1599 | IMPL_LINK( SvxLineTabPage, SizeHdl_Impl, weld::MetricSpinButton&, rField, void)void SvxLineTabPage::LinkStubSizeHdl_Impl(void * instance, weld ::MetricSpinButton& data) { return static_cast<SvxLineTabPage *>(instance)->SizeHdl_Impl(data); } void SvxLineTabPage ::SizeHdl_Impl(weld::MetricSpinButton& rField) | |||
1600 | { | |||
1601 | m_bNewSize = true; | |||
1602 | bool bWidth = &rField == m_xSymbolWidthMF.get(); | |||
1603 | m_bLastWidthModified = bWidth; | |||
1604 | bool bRatio = m_xSymbolRatioCB->get_active(); | |||
1605 | long nWidthVal = static_cast<long>(m_xSymbolWidthMF->denormalize(m_xSymbolWidthMF->get_value(FieldUnit::MM_100TH))); | |||
1606 | long nHeightVal= static_cast<long>(m_xSymbolHeightMF->denormalize(m_xSymbolHeightMF->get_value(FieldUnit::MM_100TH))); | |||
1607 | nWidthVal = OutputDevice::LogicToLogic(nWidthVal,MapUnit::Map100thMM, m_ePoolUnit ); | |||
1608 | nHeightVal = OutputDevice::LogicToLogic(nHeightVal,MapUnit::Map100thMM, m_ePoolUnit); | |||
1609 | m_aSymbolSize = Size(nWidthVal,nHeightVal); | |||
1610 | double fSizeRatio = double(1); | |||
1611 | ||||
1612 | if(bRatio) | |||
1613 | { | |||
1614 | if (m_aSymbolLastSize.Height() && m_aSymbolLastSize.Width()) | |||
1615 | fSizeRatio = static_cast<double>(m_aSymbolLastSize.Width()) / m_aSymbolLastSize.Height(); | |||
1616 | } | |||
1617 | ||||
1618 | if (bWidth) | |||
1619 | { | |||
1620 | long nDelta = nWidthVal - m_aSymbolLastSize.Width(); | |||
1621 | m_aSymbolSize.setWidth( nWidthVal ); | |||
1622 | if (bRatio) | |||
1623 | { | |||
1624 | m_aSymbolSize.setHeight( m_aSymbolLastSize.Height() + static_cast<long>(static_cast<double>(nDelta) / fSizeRatio) ); | |||
1625 | m_aSymbolSize.setHeight( OutputDevice::LogicToLogic( m_aSymbolSize.Height(), m_ePoolUnit, MapUnit::Map100thMM ) ); | |||
1626 | //TODO m_xSymbolHeightMF->SetUserValue(m_xSymbolHeightMF->normalize(m_aSymbolSize.Height()), FieldUnit::MM_100TH); | |||
1627 | m_xSymbolHeightMF->set_value(m_xSymbolHeightMF->normalize(m_aSymbolSize.Height()), FieldUnit::MM_100TH); | |||
1628 | } | |||
1629 | } | |||
1630 | else | |||
1631 | { | |||
1632 | long nDelta = nHeightVal - m_aSymbolLastSize.Height(); | |||
1633 | m_aSymbolSize.setHeight( nHeightVal ); | |||
1634 | if (bRatio) | |||
1635 | { | |||
1636 | m_aSymbolSize.setWidth( m_aSymbolLastSize.Width() + static_cast<long>(static_cast<double>(nDelta) * fSizeRatio) ); | |||
1637 | m_aSymbolSize.setWidth( OutputDevice::LogicToLogic( m_aSymbolSize.Width(), m_ePoolUnit, MapUnit::Map100thMM ) ); | |||
1638 | //TODO m_xSymbolWidthMF->SetUserValue(m_xSymbolWidthMF->normalize(m_aSymbolSize.Width()), FieldUnit::MM_100TH); | |||
1639 | m_xSymbolWidthMF->set_value(m_xSymbolWidthMF->normalize(m_aSymbolSize.Width()), FieldUnit::MM_100TH); | |||
1640 | } | |||
1641 | } | |||
1642 | m_aCtlPreview.ResizeSymbol(m_aSymbolSize); | |||
1643 | m_aSymbolLastSize=m_aSymbolSize; | |||
1644 | } | |||
1645 | ||||
1646 | IMPL_LINK(SvxLineTabPage, RatioHdl_Impl, weld::ToggleButton&, rBox, void)void SvxLineTabPage::LinkStubRatioHdl_Impl(void * instance, weld ::ToggleButton& data) { return static_cast<SvxLineTabPage *>(instance)->RatioHdl_Impl(data); } void SvxLineTabPage ::RatioHdl_Impl(weld::ToggleButton& rBox) | |||
1647 | { | |||
1648 | if (rBox.get_active()) | |||
1649 | { | |||
1650 | if (m_bLastWidthModified) | |||
1651 | SizeHdl_Impl(*m_xSymbolWidthMF); | |||
1652 | else | |||
1653 | SizeHdl_Impl(*m_xSymbolHeightMF); | |||
1654 | } | |||
1655 | } | |||
1656 | ||||
1657 | void SvxLineTabPage::PageCreated(const SfxAllItemSet& aSet) | |||
1658 | { | |||
1659 | const SvxDashListItem* pDashListItem = aSet.GetItem<SvxDashListItem>(SID_DASH_LISTTypedWhichId<SvxDashListItem>( 10000 + 184 ), false); | |||
1660 | const SvxLineEndListItem* pLineEndListItem = aSet.GetItem<SvxLineEndListItem>(SID_LINEEND_LISTTypedWhichId<SvxLineEndListItem>( 10000 + 185 ), false); | |||
1661 | const SfxUInt16Item* pPageTypeItem = aSet.GetItem<SfxUInt16Item>(SID_PAGE_TYPE( 10000 + 1017 ), false); | |||
1662 | const SfxUInt16Item* pDlgTypeItem = aSet.GetItem<SfxUInt16Item>(SID_DLG_TYPE( 10000 + 1018 ), false); | |||
1663 | const OfaPtrItem* pSdrObjListItem = aSet.GetItem<OfaPtrItem>(SID_OBJECT_LIST( 10000 + 1021 ), false); | |||
1664 | const SfxTabDialogItem* pSymbolAttrItem = aSet.GetItem<SfxTabDialogItem>(SID_ATTR_SET( 10000 + 1022 ), false); | |||
1665 | const SvxGraphicItem* pGraphicItem = aSet.GetItem<SvxGraphicItem>(SID_GRAPHIC( 10000 + 1020 ), false); | |||
1666 | ||||
1667 | if (pDashListItem) | |||
1668 | SetDashList(pDashListItem->GetDashList()); | |||
1669 | if (pLineEndListItem) | |||
1670 | SetLineEndList(pLineEndListItem->GetLineEndList()); | |||
1671 | if (pPageTypeItem) | |||
1672 | SetPageType(static_cast<PageType>(pPageTypeItem->GetValue())); | |||
1673 | if (pDlgTypeItem) | |||
1674 | SetDlgType(pDlgTypeItem->GetValue()); | |||
1675 | Construct(); | |||
1676 | ||||
1677 | if(pSdrObjListItem) //symbols | |||
1678 | { | |||
1679 | ShowSymbolControls(true); | |||
1680 | m_pSymbolList = static_cast<SdrObjList*>(pSdrObjListItem->GetValue()); | |||
1681 | if (pSymbolAttrItem) | |||
1682 | m_pSymbolAttr = new SfxItemSet(pSymbolAttrItem->GetItemSet()); | |||
1683 | if(pGraphicItem) | |||
1684 | m_aAutoSymbolGraphic = pGraphicItem->GetGraphic(); | |||
1685 | } | |||
1686 | } | |||
1687 | ||||
1688 | /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |
1 | /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ |
2 | /* |
3 | * This file is part of the LibreOffice project. |
4 | * |
5 | * This Source Code Form is subject to the terms of the Mozilla Public |
6 | * License, v. 2.0. If a copy of the MPL was not distributed with this |
7 | * file, You can obtain one at http://mozilla.org/MPL/2.0/. |
8 | * |
9 | * This file incorporates work covered by the following license notice: |
10 | * |
11 | * Licensed to the Apache Software Foundation (ASF) under one or more |
12 | * contributor license agreements. See the NOTICE file distributed |
13 | * with this work for additional information regarding copyright |
14 | * ownership. The ASF licenses this file to you under the Apache |
15 | * License, Version 2.0 (the "License"); you may not use this file |
16 | * except in compliance with the License. You may obtain a copy of |
17 | * the License at http://www.apache.org/licenses/LICENSE-2.0 . |
18 | */ |
19 | |
20 | #ifndef INCLUDED_VCL_PTR_HXX |
21 | #define INCLUDED_VCL_PTR_HXX |
22 | |
23 | #include <sal/config.h> |
24 | |
25 | #include <rtl/ref.hxx> |
26 | |
27 | #include <utility> |
28 | #include <type_traits> |
29 | |
30 | #ifdef DBG_UTIL |
31 | #ifndef _WIN32 |
32 | #include <vcl/vclmain.hxx> |
33 | #endif |
34 | #endif |
35 | |
36 | class VclReferenceBase; |
37 | |
38 | namespace vcl::detail { |
39 | |
40 | template<typename> |
41 | constexpr bool isIncompleteOrDerivedFromVclReferenceBase(...) { return true; } |
42 | |
43 | template<typename T> constexpr bool isIncompleteOrDerivedFromVclReferenceBase( |
44 | int (*)[sizeof(T)]) |
45 | { return std::is_base_of<VclReferenceBase, T>::value; } |
46 | |
47 | } // namespace vcl::detail |
48 | |
49 | /** |
50 | * A thin wrapper around rtl::Reference to implement the acquire and dispose semantics we want for references to vcl::Window subclasses. |
51 | * |
52 | * For more details on the design please see vcl/README.lifecycle |
53 | * |
54 | * @param reference_type must be a subclass of vcl::Window |
55 | */ |
56 | template <class reference_type> |
57 | class VclPtr |
58 | { |
59 | static_assert( |
60 | vcl::detail::isIncompleteOrDerivedFromVclReferenceBase<reference_type>( |
61 | nullptr), |
62 | "template argument type must be derived from VclReferenceBase"); |
63 | |
64 | ::rtl::Reference<reference_type> m_rInnerRef; |
65 | |
66 | public: |
67 | /** Constructor... |
68 | */ |
69 | VclPtr() |
70 | : m_rInnerRef() |
71 | {} |
72 | |
73 | /** Constructor... |
74 | */ |
75 | VclPtr (reference_type * pBody) |
76 | : m_rInnerRef(pBody) |
77 | {} |
78 | |
79 | /** Constructor... that doesn't take a ref. |
80 | */ |
81 | VclPtr (reference_type * pBody, __sal_NoAcquire) |
82 | : m_rInnerRef(pBody, SAL_NO_ACQUIRE) |
83 | {} |
84 | |
85 | /** Up-casting conversion constructor: Copies interface reference. |
86 | |
87 | Does not work for up-casts to ambiguous bases. For the special case of |
88 | up-casting to Reference< XInterface >, see the corresponding conversion |
89 | operator. |
90 | |
91 | @param rRef another reference |
92 | */ |
93 | template< class derived_type > |
94 | VclPtr( |
95 | const VclPtr< derived_type > & rRef, |
96 | typename std::enable_if< |
97 | std::is_base_of<reference_type, derived_type>::value, int>::type |
98 | = 0 ) |
99 | : m_rInnerRef( static_cast<reference_type*>(rRef) ) |
100 | { |
101 | } |
102 | |
103 | #if defined(DBG_UTIL) && !defined(_WIN32) |
104 | virtual ~VclPtr() |
105 | { |
106 | assert(m_rInnerRef.get() == nullptr || vclmain::isAlive())(static_cast <bool> (m_rInnerRef.get() == nullptr || vclmain ::isAlive()) ? void (0) : __assert_fail ("m_rInnerRef.get() == nullptr || vclmain::isAlive()" , "/home/maarten/src/libreoffice/core/include/vcl/vclptr.hxx" , 106, __extension__ __PRETTY_FUNCTION__)); |
107 | // We can be one of the intermediate counts, but if we are the last |
108 | // VclPtr keeping this object alive, then something forgot to call dispose(). |
109 | assert((!m_rInnerRef.get() || m_rInnerRef->isDisposed() || m_rInnerRef->getRefCount() > 1)(static_cast <bool> ((!m_rInnerRef.get() || m_rInnerRef ->isDisposed() || m_rInnerRef->getRefCount() > 1) && "someone forgot to call dispose()") ? void (0) : __assert_fail ("(!m_rInnerRef.get() || m_rInnerRef->isDisposed() || m_rInnerRef->getRefCount() > 1) && \"someone forgot to call dispose()\"" , "/home/maarten/src/libreoffice/core/include/vcl/vclptr.hxx" , 110, __extension__ __PRETTY_FUNCTION__)) |
110 | && "someone forgot to call dispose()")(static_cast <bool> ((!m_rInnerRef.get() || m_rInnerRef ->isDisposed() || m_rInnerRef->getRefCount() > 1) && "someone forgot to call dispose()") ? void (0) : __assert_fail ("(!m_rInnerRef.get() || m_rInnerRef->isDisposed() || m_rInnerRef->getRefCount() > 1) && \"someone forgot to call dispose()\"" , "/home/maarten/src/libreoffice/core/include/vcl/vclptr.hxx" , 110, __extension__ __PRETTY_FUNCTION__)); |
111 | } |
112 | VclPtr(VclPtr const &) = default; |
113 | VclPtr(VclPtr &&) = default; |
114 | VclPtr & operator =(VclPtr const &) = default; |
115 | VclPtr & operator =(VclPtr &&) = default; |
116 | #endif |
117 | |
118 | /** |
119 | * A construction helper for VclPtr. Since VclPtr types are created |
120 | * with a reference-count of one - to help fit into the existing |
121 | * code-flow; this helps us to construct them easily. |
122 | * |
123 | * For more details on the design please see vcl/README.lifecycle |
124 | * |
125 | * @tparam reference_type must be a subclass of vcl::Window |
126 | */ |
127 | template<typename... Arg> [[nodiscard]] static VclPtr< reference_type > Create(Arg &&... arg) |
128 | { |
129 | return VclPtr< reference_type >( new reference_type(std::forward<Arg>(arg)...), SAL_NO_ACQUIRE ); |
130 | } |
131 | |
132 | /** Probably most common used: handle->someBodyOp(). |
133 | */ |
134 | reference_type * operator->() const |
135 | { |
136 | return m_rInnerRef.get(); |
137 | } |
138 | |
139 | /** Get the body. Can be used instead of operator->(). |
140 | I.e. handle->someBodyOp() and handle.get()->someBodyOp() |
141 | are the same. |
142 | */ |
143 | reference_type * get() const |
144 | { |
145 | return m_rInnerRef.get(); |
146 | } |
147 | |
148 | void set(reference_type *pBody) |
149 | { |
150 | m_rInnerRef.set(pBody); |
151 | } |
152 | |
153 | void reset(reference_type *pBody) |
154 | { |
155 | m_rInnerRef.set(pBody); |
156 | } |
157 | |
158 | /** Up-casting copy assignment operator. |
159 | |
160 | Does not work for up-casts to ambiguous bases. |
161 | |
162 | @param rRef another reference |
163 | */ |
164 | template<typename derived_type> |
165 | typename std::enable_if< |
166 | std::is_base_of<reference_type, derived_type>::value, |
167 | VclPtr &>::type |
168 | operator =(VclPtr<derived_type> const & rRef) |
169 | { |
170 | m_rInnerRef.set(rRef.get()); |
171 | return *this; |
172 | } |
173 | |
174 | VclPtr & operator =(reference_type * pBody) |
175 | { |
176 | m_rInnerRef.set(pBody); |
177 | return *this; |
178 | } |
179 | |
180 | operator reference_type * () const |
181 | { |
182 | return m_rInnerRef.get(); |
183 | } |
184 | |
185 | explicit operator bool () const |
186 | { |
187 | return m_rInnerRef.get() != nullptr; |
188 | } |
189 | |
190 | void clear() |
191 | { |
192 | m_rInnerRef.clear(); |
193 | } |
194 | |
195 | void reset() |
196 | { |
197 | m_rInnerRef.clear(); |
198 | } |
199 | |
200 | void disposeAndClear() |
201 | { |
202 | // hold it alive for the lifetime of this method |
203 | ::rtl::Reference<reference_type> aTmp(m_rInnerRef); |
204 | m_rInnerRef.clear(); // we should use some 'swap' method ideally ;-) |
205 | if (aTmp.get()) { |
206 | aTmp->disposeOnce(); |
207 | } |
208 | } |
209 | |
210 | /** Needed to place VclPtr's into STL collection. |
211 | */ |
212 | bool operator< (const VclPtr<reference_type> & handle) const |
213 | { |
214 | return (m_rInnerRef < handle.m_rInnerRef); |
215 | } |
216 | }; // class VclPtr |
217 | |
218 | template<typename T1, typename T2> |
219 | inline bool operator ==(VclPtr<T1> const & p1, VclPtr<T2> const & p2) { |
220 | return p1.get() == p2.get(); |
221 | } |
222 | |
223 | template<typename T> inline bool operator ==(VclPtr<T> const & p1, T const * p2) |
224 | { |
225 | return p1.get() == p2; |
226 | } |
227 | |
228 | template<typename T> inline bool operator ==(VclPtr<T> const & p1, T * p2) { |
229 | return p1.get() == p2; |
230 | } |
231 | |
232 | template<typename T> inline bool operator ==(T const * p1, VclPtr<T> const & p2) |
233 | { |
234 | return p1 == p2.get(); |
235 | } |
236 | |
237 | template<typename T> inline bool operator ==(T * p1, VclPtr<T> const & p2) { |
238 | return p1 == p2.get(); |
239 | } |
240 | |
241 | template<typename T1, typename T2> |
242 | inline bool operator !=(VclPtr<T1> const & p1, VclPtr<T2> const & p2) { |
243 | return !(p1 == p2); |
244 | } |
245 | |
246 | template<typename T> inline bool operator !=(VclPtr<T> const & p1, T const * p2) |
247 | { |
248 | return !(p1 == p2); |
249 | } |
250 | |
251 | template<typename T> inline bool operator !=(VclPtr<T> const & p1, T * p2) { |
252 | return !(p1 == p2); |
253 | } |
254 | |
255 | template<typename T> inline bool operator !=(T const * p1, VclPtr<T> const & p2) |
256 | { |
257 | return !(p1 == p2); |
258 | } |
259 | |
260 | template<typename T> inline bool operator !=(T * p1, VclPtr<T> const & p2) { |
261 | return !(p1 == p2); |
262 | } |
263 | |
264 | /** |
265 | * A construction helper for a temporary VclPtr. Since VclPtr types |
266 | * are created with a reference-count of one - to help fit into |
267 | * the existing code-flow; this helps us to construct them easily. |
268 | * see also VclPtr::Create and ScopedVclPtr |
269 | * |
270 | * For more details on the design please see vcl/README.lifecycle |
271 | * |
272 | * @param reference_type must be a subclass of vcl::Window |
273 | */ |
274 | template <class reference_type> |
275 | class SAL_WARN_UNUSED__attribute__((warn_unused)) VclPtrInstance final : public VclPtr<reference_type> |
276 | { |
277 | public: |
278 | template<typename... Arg> VclPtrInstance(Arg &&... arg) |
279 | : VclPtr<reference_type>( new reference_type(std::forward<Arg>(arg)...), SAL_NO_ACQUIRE ) |
280 | { |
281 | } |
282 | |
283 | /** |
284 | * Override and disallow this, to prevent people accidentally calling it and actually |
285 | * getting VclPtr::Create and getting a naked VclPtr<> instance |
286 | */ |
287 | template<typename... Arg> static VclPtrInstance< reference_type > Create(Arg &&... ) = delete; |
288 | }; |
289 | |
290 | template <class reference_type> |
291 | class ScopedVclPtr : public VclPtr<reference_type> |
292 | { |
293 | public: |
294 | /** Constructor... |
295 | */ |
296 | ScopedVclPtr() |
297 | : VclPtr<reference_type>() |
298 | {} |
299 | |
300 | /** Constructor |
301 | */ |
302 | ScopedVclPtr (reference_type * pBody) |
303 | : VclPtr<reference_type>(pBody) |
304 | {} |
305 | |
306 | /** Copy constructor... |
307 | */ |
308 | ScopedVclPtr (const VclPtr<reference_type> & handle) |
309 | : VclPtr<reference_type>(handle) |
310 | {} |
311 | |
312 | /** |
313 | Assignment that releases the last reference. |
314 | */ |
315 | void disposeAndReset(reference_type *pBody) |
316 | { |
317 | if (pBody != this->get()) { |
318 | VclPtr<reference_type>::disposeAndClear(); |
319 | VclPtr<reference_type>::set(pBody); |
320 | } |
321 | } |
322 | |
323 | /** |
324 | Assignment that releases the last reference. |
325 | */ |
326 | ScopedVclPtr<reference_type>& operator = (reference_type * pBody) |
327 | { |
328 | disposeAndReset(pBody); |
329 | return *this; |
330 | } |
331 | |
332 | /** Up-casting conversion constructor: Copies interface reference. |
333 | |
334 | Does not work for up-casts to ambiguous bases. For the special case of |
335 | up-casting to Reference< XInterface >, see the corresponding conversion |
336 | operator. |
337 | |
338 | @param rRef another reference |
339 | */ |
340 | template< class derived_type > |
341 | ScopedVclPtr( |
342 | const VclPtr< derived_type > & rRef, |
343 | typename std::enable_if< |
344 | std::is_base_of<reference_type, derived_type>::value, int>::type |
345 | = 0 ) |
346 | : VclPtr<reference_type>( rRef ) |
347 | { |
348 | } |
349 | |
350 | /** Up-casting assignment operator. |
351 | |
352 | Does not work for up-casts to ambiguous bases. |
353 | |
354 | @param rRef another VclPtr |
355 | */ |
356 | template<typename derived_type> |
357 | typename std::enable_if< |
358 | std::is_base_of<reference_type, derived_type>::value, |
359 | ScopedVclPtr &>::type |
360 | operator =(VclPtr<derived_type> const & rRef) |
361 | { |
362 | disposeAndReset(rRef.get()); |
363 | return *this; |
364 | } |
365 | |
366 | /** |
367 | * Override and disallow this, to prevent people accidentally calling it and actually |
368 | * getting VclPtr::Create and getting a naked VclPtr<> instance |
369 | */ |
370 | template<typename... Arg> static ScopedVclPtr< reference_type > Create(Arg &&... ) = delete; |
371 | |
372 | ~ScopedVclPtr() |
373 | { |
374 | VclPtr<reference_type>::disposeAndClear(); |
375 | assert(VclPtr<reference_type>::get() == nullptr)(static_cast <bool> (VclPtr<reference_type>::get( ) == nullptr) ? void (0) : __assert_fail ("VclPtr<reference_type>::get() == nullptr" , "/home/maarten/src/libreoffice/core/include/vcl/vclptr.hxx" , 375, __extension__ __PRETTY_FUNCTION__)); // make sure there are no lingering references |
376 | } |
377 | |
378 | private: |
379 | // Most likely we don't want this default copy-constructor. |
380 | ScopedVclPtr (const ScopedVclPtr<reference_type> &) = delete; |
381 | // And certainly we don't want a default assignment operator. |
382 | ScopedVclPtr<reference_type>& operator = (const ScopedVclPtr<reference_type> &) = delete; |
383 | // And disallow reset as that doesn't call disposeAndClear on the original reference |
384 | void reset() = delete; |
385 | void reset(reference_type *pBody) = delete; |
386 | |
387 | protected: |
388 | ScopedVclPtr (reference_type * pBody, __sal_NoAcquire) |
389 | : VclPtr<reference_type>(pBody, SAL_NO_ACQUIRE) |
390 | {} |
391 | }; |
392 | |
393 | /** |
394 | * A construction helper for ScopedVclPtr. Since VclPtr types are created |
395 | * with a reference-count of one - to help fit into the existing |
396 | * code-flow; this helps us to construct them easily. |
397 | * |
398 | * For more details on the design please see vcl/README.lifecycle |
399 | * |
400 | * @param reference_type must be a subclass of vcl::Window |
401 | */ |
402 | #if defined _MSC_VER |
403 | #pragma warning(push) |
404 | #pragma warning(disable: 4521) // " multiple copy constructors specified" |
405 | #endif |
406 | template <class reference_type> |
407 | class SAL_WARN_UNUSED__attribute__((warn_unused)) ScopedVclPtrInstance final : public ScopedVclPtr<reference_type> |
408 | { |
409 | public: |
410 | template<typename... Arg> ScopedVclPtrInstance(Arg &&... arg) |
411 | : ScopedVclPtr<reference_type>( new reference_type(std::forward<Arg>(arg)...), SAL_NO_ACQUIRE ) |
412 | { |
413 | } |
414 | |
415 | /** |
416 | * Override and disallow this, to prevent people accidentally calling it and actually |
417 | * getting VclPtr::Create and getting a naked VclPtr<> instance |
418 | */ |
419 | template<typename... Arg> static ScopedVclPtrInstance< reference_type > Create(Arg &&...) = delete; |
420 | |
421 | private: |
422 | // Prevent the above perfect forwarding ctor from hijacking (accidental) |
423 | // attempts at ScopedVclPtrInstance copy construction (where the hijacking |
424 | // would typically lead to somewhat obscure error messages); both non-const |
425 | // and const variants are needed here, as the ScopedVclPtr base class has a |
426 | // const--variant copy ctor, so the implicitly declared copy ctor for |
427 | // ScopedVclPtrInstance would also be the const variant, so non-const copy |
428 | // construction attempts would be hijacked by the perfect forwarding ctor; |
429 | // but if we only declared a non-const variant here, the const variant would |
430 | // no longer be implicitly declared (as there would already be an explicitly |
431 | // declared copy ctor), so const copy construction attempts would then be |
432 | // hijacked by the perfect forwarding ctor: |
433 | ScopedVclPtrInstance(ScopedVclPtrInstance &) = delete; |
434 | ScopedVclPtrInstance(ScopedVclPtrInstance const &) = delete; |
435 | }; |
436 | #if defined _MSC_VER |
437 | #pragma warning(pop) |
438 | #endif |
439 | |
440 | #endif // INCLUDED_VCL_PTR_HXX |
441 | |
442 | /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |
1 | /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ | ||||||||
2 | /* | ||||||||
3 | * This file is part of the LibreOffice project. | ||||||||
4 | * | ||||||||
5 | * This Source Code Form is subject to the terms of the Mozilla Public | ||||||||
6 | * License, v. 2.0. If a copy of the MPL was not distributed with this | ||||||||
7 | * file, You can obtain one at http://mozilla.org/MPL/2.0/. | ||||||||
8 | * | ||||||||
9 | * This file incorporates work covered by the following license notice: | ||||||||
10 | * | ||||||||
11 | * Licensed to the Apache Software Foundation (ASF) under one or more | ||||||||
12 | * contributor license agreements. See the NOTICE file distributed | ||||||||
13 | * with this work for additional information regarding copyright | ||||||||
14 | * ownership. The ASF licenses this file to you under the Apache | ||||||||
15 | * License, Version 2.0 (the "License"); you may not use this file | ||||||||
16 | * except in compliance with the License. You may obtain a copy of | ||||||||
17 | * the License at http://www.apache.org/licenses/LICENSE-2.0 . | ||||||||
18 | */ | ||||||||
19 | |||||||||
20 | #ifndef INCLUDED_RTL_REF_HXX | ||||||||
21 | #define INCLUDED_RTL_REF_HXX | ||||||||
22 | |||||||||
23 | #include "sal/config.h" | ||||||||
24 | |||||||||
25 | #include <cassert> | ||||||||
26 | #include <cstddef> | ||||||||
27 | #include <functional> | ||||||||
28 | #ifdef LIBO_INTERNAL_ONLY1 | ||||||||
29 | #include <type_traits> | ||||||||
30 | #endif | ||||||||
31 | |||||||||
32 | #include "sal/types.h" | ||||||||
33 | |||||||||
34 | namespace rtl | ||||||||
35 | { | ||||||||
36 | |||||||||
37 | /** Template reference class for reference type. | ||||||||
38 | */ | ||||||||
39 | template <class reference_type> | ||||||||
40 | class Reference | ||||||||
41 | { | ||||||||
42 | /** The <b>reference_type</b> body pointer. | ||||||||
43 | */ | ||||||||
44 | reference_type * m_pBody; | ||||||||
45 | |||||||||
46 | |||||||||
47 | public: | ||||||||
48 | /** Constructor... | ||||||||
49 | */ | ||||||||
50 | Reference() | ||||||||
51 | : m_pBody (NULL__null) | ||||||||
52 | {} | ||||||||
53 | |||||||||
54 | |||||||||
55 | /** Constructor... | ||||||||
56 | */ | ||||||||
57 | Reference (reference_type * pBody, __sal_NoAcquire) | ||||||||
58 | : m_pBody (pBody) | ||||||||
59 | { | ||||||||
60 | } | ||||||||
61 | |||||||||
62 | /** Constructor... | ||||||||
63 | */ | ||||||||
64 | Reference (reference_type * pBody) | ||||||||
65 | : m_pBody (pBody) | ||||||||
66 | { | ||||||||
67 | if (m_pBody) | ||||||||
68 | m_pBody->acquire(); | ||||||||
69 | } | ||||||||
70 | |||||||||
71 | /** Copy constructor... | ||||||||
72 | */ | ||||||||
73 | Reference (const Reference<reference_type> & handle) | ||||||||
74 | : m_pBody (handle.m_pBody) | ||||||||
75 | { | ||||||||
76 | if (m_pBody) | ||||||||
77 | m_pBody->acquire(); | ||||||||
78 | } | ||||||||
79 | |||||||||
80 | #ifdef LIBO_INTERNAL_ONLY1 | ||||||||
81 | /** Move constructor... | ||||||||
82 | */ | ||||||||
83 | Reference (Reference<reference_type> && handle) noexcept | ||||||||
84 | : m_pBody (handle.m_pBody) | ||||||||
85 | { | ||||||||
86 | handle.m_pBody = nullptr; | ||||||||
87 | } | ||||||||
88 | #endif | ||||||||
89 | |||||||||
90 | #if defined LIBO_INTERNAL_ONLY1 | ||||||||
91 | /** Up-casting conversion constructor: Copies interface reference. | ||||||||
92 | |||||||||
93 | Does not work for up-casts to ambiguous bases. | ||||||||
94 | |||||||||
95 | @param rRef another reference | ||||||||
96 | */ | ||||||||
97 | template< class derived_type > | ||||||||
98 | inline Reference( | ||||||||
99 | const Reference< derived_type > & rRef, | ||||||||
100 | std::enable_if_t<std::is_base_of_v<reference_type, derived_type>, int> = 0 ) | ||||||||
101 | : m_pBody (rRef.get()) | ||||||||
102 | { | ||||||||
103 | if (m_pBody) | ||||||||
104 | m_pBody->acquire(); | ||||||||
105 | } | ||||||||
106 | #endif | ||||||||
107 | |||||||||
108 | /** Destructor... | ||||||||
109 | */ | ||||||||
110 | ~Reference() COVERITY_NOEXCEPT_FALSE | ||||||||
111 | { | ||||||||
112 | if (m_pBody) | ||||||||
113 | m_pBody->release(); | ||||||||
114 | } | ||||||||
115 | |||||||||
116 | /** Set... | ||||||||
117 | Similar to assignment. | ||||||||
118 | */ | ||||||||
119 | Reference<reference_type> & | ||||||||
120 | SAL_CALL set (reference_type * pBody) | ||||||||
121 | { | ||||||||
122 | if (pBody) | ||||||||
123 | pBody->acquire(); | ||||||||
124 | reference_type * const pOld = m_pBody; | ||||||||
125 | m_pBody = pBody; | ||||||||
126 | if (pOld) | ||||||||
127 | pOld->release(); | ||||||||
128 | return *this; | ||||||||
129 | } | ||||||||
130 | |||||||||
131 | /** Assignment. | ||||||||
132 | Unbinds this instance from its body (if bound) and | ||||||||
133 | bind it to the body represented by the handle. | ||||||||
134 | */ | ||||||||
135 | Reference<reference_type> & | ||||||||
136 | SAL_CALL operator= (const Reference<reference_type> & handle) | ||||||||
137 | { | ||||||||
138 | return set( handle.m_pBody ); | ||||||||
139 | } | ||||||||
140 | |||||||||
141 | #ifdef LIBO_INTERNAL_ONLY1 | ||||||||
142 | /** Assignment. | ||||||||
143 | * Unbinds this instance from its body (if bound), | ||||||||
144 | * bind it to the body represented by the handle, and | ||||||||
145 | * set the body represented by the handle to nullptr. | ||||||||
146 | */ | ||||||||
147 | Reference<reference_type> & | ||||||||
148 | operator= (Reference<reference_type> && handle) | ||||||||
149 | { | ||||||||
150 | // self-movement guts ourself | ||||||||
151 | if (m_pBody) | ||||||||
152 | m_pBody->release(); | ||||||||
153 | m_pBody = handle.m_pBody; | ||||||||
154 | handle.m_pBody = nullptr; | ||||||||
155 | return *this; | ||||||||
156 | } | ||||||||
157 | #endif | ||||||||
158 | |||||||||
159 | /** Assignment... | ||||||||
160 | */ | ||||||||
161 | Reference<reference_type> & | ||||||||
162 | SAL_CALL operator= (reference_type * pBody) | ||||||||
163 | { | ||||||||
164 | return set( pBody ); | ||||||||
165 | } | ||||||||
166 | |||||||||
167 | /** Unbind the body from this handle. | ||||||||
168 | Note that for a handle representing a large body, | ||||||||
169 | "handle.clear().set(new body());" _might_ | ||||||||
170 | perform a little bit better than "handle.set(new body());", | ||||||||
171 | since in the second case two large objects exist in memory | ||||||||
172 | (the old body and the new body). | ||||||||
173 | */ | ||||||||
174 | Reference<reference_type> & SAL_CALL clear() | ||||||||
175 | { | ||||||||
176 | if (m_pBody
| ||||||||
177 | { | ||||||||
178 | reference_type * const pOld = m_pBody; | ||||||||
179 | m_pBody = NULL__null; | ||||||||
180 | pOld->release(); | ||||||||
181 | } | ||||||||
182 | return *this; | ||||||||
183 | } | ||||||||
184 | |||||||||
185 | |||||||||
186 | /** Get the body. Can be used instead of operator->(). | ||||||||
187 | I.e. handle->someBodyOp() and handle.get()->someBodyOp() | ||||||||
188 | are the same. | ||||||||
189 | */ | ||||||||
190 | reference_type * SAL_CALL get() const | ||||||||
191 | { | ||||||||
192 | return m_pBody; | ||||||||
| |||||||||
193 | } | ||||||||
194 | |||||||||
195 | |||||||||
196 | /** Probably most common used: handle->someBodyOp(). | ||||||||
197 | */ | ||||||||
198 | reference_type * SAL_CALL operator->() const | ||||||||
199 | { | ||||||||
200 | assert(m_pBody != NULL)(static_cast <bool> (m_pBody != __null) ? void (0) : __assert_fail ("m_pBody != NULL", "/home/maarten/src/libreoffice/core/include/rtl/ref.hxx" , 200, __extension__ __PRETTY_FUNCTION__)); | ||||||||
201 | return m_pBody; | ||||||||
202 | } | ||||||||
203 | |||||||||
204 | |||||||||
205 | /** Allows (*handle).someBodyOp(). | ||||||||
206 | */ | ||||||||
207 | reference_type & SAL_CALL operator*() const | ||||||||
208 | { | ||||||||
209 | assert(m_pBody != NULL)(static_cast <bool> (m_pBody != __null) ? void (0) : __assert_fail ("m_pBody != NULL", "/home/maarten/src/libreoffice/core/include/rtl/ref.hxx" , 209, __extension__ __PRETTY_FUNCTION__)); | ||||||||
210 | return *m_pBody; | ||||||||
211 | } | ||||||||
212 | |||||||||
213 | |||||||||
214 | /** Returns True if the handle does point to a valid body. | ||||||||
215 | */ | ||||||||
216 | bool SAL_CALL is() const | ||||||||
217 | { | ||||||||
218 | return (m_pBody != NULL__null); | ||||||||
219 | } | ||||||||
220 | |||||||||
221 | #if defined LIBO_INTERNAL_ONLY1 | ||||||||
222 | /** Returns True if the handle does point to a valid body. | ||||||||
223 | */ | ||||||||
224 | explicit operator bool() const | ||||||||
225 | { | ||||||||
226 | return is(); | ||||||||
227 | } | ||||||||
228 | #endif | ||||||||
229 | |||||||||
230 | /** Returns True if this points to pBody. | ||||||||
231 | */ | ||||||||
232 | bool SAL_CALL operator== (const reference_type * pBody) const | ||||||||
233 | { | ||||||||
234 | return (m_pBody == pBody); | ||||||||
235 | } | ||||||||
236 | |||||||||
237 | |||||||||
238 | /** Returns True if handle points to the same body. | ||||||||
239 | */ | ||||||||
240 | bool | ||||||||
241 | SAL_CALL operator== (const Reference<reference_type> & handle) const | ||||||||
242 | { | ||||||||
243 | return (m_pBody == handle.m_pBody); | ||||||||
244 | } | ||||||||
245 | |||||||||
246 | |||||||||
247 | /** Needed to place References into STL collection. | ||||||||
248 | */ | ||||||||
249 | bool | ||||||||
250 | SAL_CALL operator!= (const Reference<reference_type> & handle) const | ||||||||
251 | { | ||||||||
252 | return (m_pBody != handle.m_pBody); | ||||||||
253 | } | ||||||||
254 | |||||||||
255 | |||||||||
256 | /** Needed to place References into STL collection. | ||||||||
257 | */ | ||||||||
258 | bool | ||||||||
259 | SAL_CALL operator< (const Reference<reference_type> & handle) const | ||||||||
260 | { | ||||||||
261 | return (m_pBody < handle.m_pBody); | ||||||||
262 | } | ||||||||
263 | |||||||||
264 | |||||||||
265 | /** Needed to place References into STL collection. | ||||||||
266 | */ | ||||||||
267 | bool | ||||||||
268 | SAL_CALL operator> (const Reference<reference_type> & handle) const | ||||||||
269 | { | ||||||||
270 | return (m_pBody > handle.m_pBody); | ||||||||
271 | } | ||||||||
272 | }; | ||||||||
273 | |||||||||
274 | } // namespace rtl | ||||||||
275 | |||||||||
276 | #if defined LIBO_INTERNAL_ONLY1 | ||||||||
277 | namespace std | ||||||||
278 | { | ||||||||
279 | |||||||||
280 | /// @cond INTERNAL | ||||||||
281 | /** | ||||||||
282 | Make rtl::Reference hashable by default for use in STL containers. | ||||||||
283 | |||||||||
284 | @since LibreOffice 6.3 | ||||||||
285 | */ | ||||||||
286 | template<typename T> | ||||||||
287 | struct hash<::rtl::Reference<T>> | ||||||||
288 | { | ||||||||
289 | std::size_t operator()(::rtl::Reference<T> const & s) const | ||||||||
290 | { return std::size_t(s.get()); } | ||||||||
291 | }; | ||||||||
292 | /// @endcond | ||||||||
293 | |||||||||
294 | } | ||||||||
295 | |||||||||
296 | #endif | ||||||||
297 | |||||||||
298 | #endif /* ! INCLUDED_RTL_REF_HXX */ | ||||||||
299 | |||||||||
300 | /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |
1 | /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ |
2 | /* |
3 | * This file is part of the LibreOffice project. |
4 | * |
5 | * This Source Code Form is subject to the terms of the Mozilla Public |
6 | * License, v. 2.0. If a copy of the MPL was not distributed with this |
7 | * file, You can obtain one at http://mozilla.org/MPL/2.0/. |
8 | * |
9 | * This file incorporates work covered by the following license notice: |
10 | * |
11 | * Licensed to the Apache Software Foundation (ASF) under one or more |
12 | * contributor license agreements. See the NOTICE file distributed |
13 | * with this work for additional information regarding copyright |
14 | * ownership. The ASF licenses this file to you under the Apache |
15 | * License, Version 2.0 (the "License"); you may not use this file |
16 | * except in compliance with the License. You may obtain a copy of |
17 | * the License at http://www.apache.org/licenses/LICENSE-2.0 . |
18 | */ |
19 | #ifndef INCLUDED_VCL_Reference_HXX |
20 | #define INCLUDED_VCL_Reference_HXX |
21 | |
22 | #include <vcl/dllapi.h> |
23 | #include <osl/interlck.h> |
24 | |
25 | class VCL_DLLPUBLIC__attribute__ ((visibility("default"))) VclReferenceBase |
26 | { |
27 | mutable oslInterlockedCount mnRefCnt; |
28 | |
29 | template<typename T> friend class VclPtr; |
30 | |
31 | public: |
32 | void acquire() const |
33 | { |
34 | osl_atomic_increment(&mnRefCnt)__sync_add_and_fetch((&mnRefCnt), 1); |
35 | } |
36 | |
37 | void release() const |
38 | { |
39 | if (osl_atomic_decrement(&mnRefCnt)__sync_sub_and_fetch((&mnRefCnt), 1) == 0) |
40 | delete this; |
41 | } |
42 | #ifdef DBG_UTIL |
43 | #ifndef _WIN32 |
44 | sal_Int32 getRefCount() const { return mnRefCnt; } |
45 | #endif |
46 | #endif |
47 | |
48 | |
49 | private: |
50 | VclReferenceBase(const VclReferenceBase&) = delete; |
51 | VclReferenceBase& operator=(const VclReferenceBase&) = delete; |
52 | |
53 | bool mbDisposed : 1; |
54 | |
55 | protected: |
56 | VclReferenceBase(); |
57 | protected: |
58 | virtual ~VclReferenceBase(); |
59 | |
60 | protected: |
61 | virtual void dispose(); |
62 | |
63 | public: |
64 | void disposeOnce(); |
65 | bool isDisposed() const { return mbDisposed; } |
66 | |
67 | }; |
68 | #endif |