/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <vcl/weld.hxx>
#include <vcl/print.hxx>
#include <vcl/svapp.hxx>
#include <vcl/metaact.hxx>
#include <vcl/configsettings.hxx>
#include <vcl/unohelp.hxx>
#include <tools/urlobj.hxx>
#include <comphelper/processfactory.hxx>
#include <comphelper/sequence.hxx>
#include <sal/types.h>
#include <sal/log.hxx>
#include <printdlg.hxx>
#include <svdata.hxx>
#include <salinst.hxx>
#include <salprn.hxx>
#include <strings.hrc>
#include <com/sun/star/container/XNameAccess.hpp>
#include <com/sun/star/ui/dialogs/FilePicker.hpp>
#include <com/sun/star/ui/dialogs/XFilterManager.hpp>
#include <com/sun/star/ui/dialogs/TemplateDescription.hpp>
#include <com/sun/star/ui/dialogs/ExecutableDialogResults.hpp>
#include <com/sun/star/view/DuplexMode.hpp>
#include <com/sun/star/lang/IllegalArgumentException.hpp>
#include <com/sun/star/lang/XMultiServiceFactory.hpp>
#include <com/sun/star/awt/Size.hpp>
#include <unordered_map>
#include <unordered_set>
using namespace vcl;
class ImplPageCache
{
struct CacheEntry
{
GDIMetaFile aPage;
PrinterController::PageSize aSize;
};
std::vector< CacheEntry > maPages;
std::vector< sal_Int32 > maPageNumbers;
std::vector< sal_Int32 > maCacheRanking;
static const sal_Int32 nCacheSize = 6;
void updateRanking( sal_Int32 nLastHit )
{
if( maCacheRanking[0] != nLastHit )
{
for( sal_Int32 i = nCacheSize-1; i > 0; i-- )
maCacheRanking[i] = maCacheRanking[i-1];
maCacheRanking[0] = nLastHit;
}
}
public:
ImplPageCache()
: maPages( nCacheSize )
, maPageNumbers( nCacheSize, -1 )
, maCacheRanking( nCacheSize )
{
for( sal_Int32 i = 0; i < nCacheSize; i++ )
maCacheRanking[i] = nCacheSize - i - 1;
}
// caution: does not ensure uniqueness
void insert( sal_Int32 i_nPageNo, const GDIMetaFile& i_rPage, const PrinterController::PageSize& i_rSize )
{
sal_Int32 nReplacePage = maCacheRanking.back();
maPages[ nReplacePage ].aPage = i_rPage;
maPages[ nReplacePage ].aSize = i_rSize;
maPageNumbers[ nReplacePage ] = i_nPageNo;
// cache insertion means in our case, the page was just queried
// so update the ranking
updateRanking( nReplacePage );
}
// caution: bad algorithm; should there ever be reason to increase the cache size beyond 6
// this needs to be urgently rewritten. However do NOT increase the cache size lightly,
// whole pages can be rather memory intensive
bool get( sal_Int32 i_nPageNo, GDIMetaFile& o_rPageFile, PrinterController::PageSize& o_rSize )
{
for( sal_Int32 i = 0; i < nCacheSize; ++i )
{
if( maPageNumbers[i] == i_nPageNo )
{
updateRanking( i );
o_rPageFile = maPages[i].aPage;
o_rSize = maPages[i].aSize;
return true;
}
}
return false;
}
void invalidate()
{
for( sal_Int32 i = 0; i < nCacheSize; ++i )
{
maPageNumbers[i] = -1;
maPages[i].aPage.Clear();
maCacheRanking[i] = nCacheSize - i - 1;
}
}
};
class vcl::ImplPrinterControllerData
{
public:
struct ControlDependency
{
OUString maDependsOnName;
sal_Int32 mnDependsOnEntry;
ControlDependency() : mnDependsOnEntry( -1 ) {}
};
typedef std::unordered_map< OUString, size_t > PropertyToIndexMap;
typedef std::unordered_map< OUString, ControlDependency > ControlDependencyMap;
typedef std::unordered_map< OUString, css::uno::Sequence< sal_Bool > > ChoiceDisableMap;
VclPtr< Printer > mxPrinter;
VclPtr<vcl::Window> mxWindow;
css::uno::Sequence< css::beans::PropertyValue > maUIOptions;
std::vector< css::beans::PropertyValue > maUIProperties;
std::vector< bool > maUIPropertyEnabled;
PropertyToIndexMap maPropertyToIndex;
ControlDependencyMap maControlDependencies;
ChoiceDisableMap maChoiceDisableMap;
bool mbFirstPage;
bool mbLastPage;
bool mbReversePageOrder;
bool mbPapersizeFromSetup;
bool mbPrinterModified;
css::view::PrintableState meJobState;
vcl::PrinterController::MultiPageSetup maMultiPage;
VclPtr<vcl::PrintProgressDialog> mpProgress;
ImplPageCache maPageCache;
// set by user through printer properties subdialog of printer settings dialog
Size maDefaultPageSize;
// set by user through printer properties subdialog of printer settings dialog
sal_Int32 mnDefaultPaperBin;
// Set by user through printer properties subdialog of print dialog.
// Overrides application-set tray for a page.
sal_Int32 mnFixedPaperBin;
// N.B. Apparently we have three levels of paper tray settings
// (latter overrides former):
// 1. default tray
// 2. tray set for a concrete page by an application, e.g., writer
// allows setting a printer tray (for the default printer) for a
// page style. This setting can be overridden by user by selecting
// "Use only paper tray from printer preferences" on the Options
// page in the print dialog, in which case the default tray is
// used for all pages.
// 3. tray set in printer properties the printer dialog
// I'm not quite sure why 1. and 3. are distinct, but the commit
// history suggests this is intentional...
ImplPrinterControllerData() :
mbFirstPage( true ),
mbLastPage( false ),
mbReversePageOrder( false ),
mbPapersizeFromSetup( false ),
mbPrinterModified( false ),
meJobState( css::view::PrintableState_JOB_STARTED ),
mpProgress( nullptr ),
mnDefaultPaperBin( -1 ),
mnFixedPaperBin( -1 )
{}
~ImplPrinterControllerData() { mpProgress.disposeAndClear(); }
const Size& getRealPaperSize( const Size& i_rPageSize, bool bNoNUP ) const
{
if( mbPapersizeFromSetup )
return maDefaultPageSize;
if( maMultiPage.nRows * maMultiPage.nColumns > 1 && ! bNoNUP )
return maMultiPage.aPaperSize;
return i_rPageSize;
}
bool isFixedPageSize() const
{ return mbPapersizeFromSetup; }
PrinterController::PageSize modifyJobSetup( const css::uno::Sequence< css::beans::PropertyValue >& i_rProps );
void resetPaperToLastConfigured();
};
PrinterController::PrinterController(const VclPtr<Printer>& i_xPrinter, const VclPtr<vcl::Window>& i_xWindow)
: mpImplData( new ImplPrinterControllerData )
{
mpImplData->mxPrinter = i_xPrinter;
mpImplData->mxWindow = i_xWindow;
}
static OUString queryFile( Printer const * pPrinter )
{
OUString aResult;
css::uno::Reference< css::uno::XComponentContext > xContext( ::comphelper::getProcessComponentContext() );
css::uno::Reference< css::ui::dialogs::XFilePicker3 > xFilePicker = css::ui::dialogs::FilePicker::createWithMode(xContext, css::ui::dialogs::TemplateDescription::FILESAVE_AUTOEXTENSION);
try
{
#ifdef UNX
// add PostScript and PDF
bool bPS = true, bPDF = true;
if( pPrinter )
{
if( pPrinter->GetCapabilities( PrinterCapType::PDF ) )
bPS = false;
else
bPDF = false;
}
if( bPS )
xFilePicker->appendFilter( "PostScript", "*.ps" );
if( bPDF )
xFilePicker->appendFilter( "Portable Document Format", "*.pdf" );
#elif defined WNT
(void)pPrinter;
xFilePicker->appendFilter( "*.PRN", "*.prn" );
#endif
// add arbitrary files
xFilePicker->appendFilter(VclResId(SV_STDTEXT_ALLFILETYPES), "*.*");
}
catch (const css::lang::IllegalArgumentException&)
{
SAL_WARN( "vcl.gdi", "caught IllegalArgumentException when registering filter" );
}
if( xFilePicker->execute() == css::ui::dialogs::ExecutableDialogResults::OK )
{
css::uno::Sequence< OUString > aPathSeq( xFilePicker->getSelectedFiles() );
INetURLObject aObj( aPathSeq[0] );
aResult = aObj.PathToFileName();
}
return aResult;
}
struct PrintJobAsync
{
std::shared_ptr<PrinterController> mxController;
JobSetup maInitSetup;
PrintJobAsync(const std::shared_ptr<PrinterController>& i_xController,
const JobSetup& i_rInitSetup)
: mxController( i_xController ), maInitSetup( i_rInitSetup )
{}
DECL_LINK( ExecJob, void*, void );
};
IMPL_LINK_NOARG(PrintJobAsync, ExecJob, void*, void)
{
Printer::ImplPrintJob(mxController, maInitSetup);
// clean up, do not access members after this
delete this;
}
void Printer::PrintJob(const std::shared_ptr<PrinterController>& i_xController,
const JobSetup& i_rInitSetup)
{
bool bSynchronous = false;
css::beans::PropertyValue* pVal = i_xController->getValue( OUString( "Wait" ) );
if( pVal )
pVal->Value >>= bSynchronous;
if( bSynchronous )
ImplPrintJob(i_xController, i_rInitSetup);
else
{
PrintJobAsync* pAsync = new PrintJobAsync(i_xController, i_rInitSetup);
Application::PostUserEvent( LINK( pAsync, PrintJobAsync, ExecJob ) );
}
}
bool Printer::PreparePrintJob(std::shared_ptr<PrinterController> xController,
const JobSetup& i_rInitSetup)
{
// check if there is a default printer; if not, show an error box (if appropriate)
if( GetDefaultPrinterName().isEmpty() )
{
if (xController->isShowDialogs())
{
VclPtr<vcl::Window> xParent = xController->getWindow();
std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(xParent ? xParent->GetFrameWeld() : nullptr, "vcl/ui/errornoprinterdialog.ui"));
std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("ErrorNoPrinterDialog"));
xBox->run();
}
xController->setValue( "IsDirect",
css::uno::makeAny( false ) );
}
// setup printer
// #i114306# changed behavior back from persistence
// if no specific printer is already set, create the default printer
if (!xController->getPrinter())
{
OUString aPrinterName( i_rInitSetup.GetPrinterName() );
VclPtrInstance<Printer> xPrinter( aPrinterName );
xPrinter->SetJobSetup(i_rInitSetup);
xController->setPrinter(xPrinter);
xController->setPapersizeFromSetup(xPrinter->GetPrinterSettingsPreferred());
}
// reset last page property
xController->setLastPage(false);
// update "PageRange" property inferring from other properties:
// case 1: "Pages" set from UNO API ->
// setup "Print Selection" and insert "PageRange" attribute
// case 2: "All pages" is selected
// update "Page range" attribute to have a sensible default,
// but leave "All" as selected
// "Pages" attribute from API is now equivalent to "PageRange"
// AND "PrintContent" = 1 except calc where it is "PrintRange" = 1
// Argh ! That sure needs cleaning up
css::beans::PropertyValue* pContentVal = xController->getValue(OUString("PrintRange"));
if( ! pContentVal )
pContentVal = xController->getValue(OUString("PrintContent"));
// case 1: UNO API has set "Pages"
css::beans::PropertyValue* pPagesVal = xController->getValue(OUString("Pages"));
if( pPagesVal )
{
OUString aPagesVal;
pPagesVal->Value >>= aPagesVal;
if( !aPagesVal.isEmpty() )
{
// "Pages" attribute from API is now equivalent to "PageRange"
// AND "PrintContent" = 1 except calc where it is "PrintRange" = 1
// Argh ! That sure needs cleaning up
if( pContentVal )
{
pContentVal->Value <<= sal_Int32( 1 );
xController->setValue("PageRange", pPagesVal->Value);
}
}
}
// case 2: is "All" selected ?
else if( pContentVal )
{
sal_Int32 nContent = -1;
if( pContentVal->Value >>= nContent )
{
if( nContent == 0 )
{
// do not overwrite PageRange if it is already set
css::beans::PropertyValue* pRangeVal = xController->getValue(OUString("PageRange"));
OUString aRange;
if( pRangeVal )
pRangeVal->Value >>= aRange;
if( aRange.isEmpty() )
{
sal_Int32 nPages = xController->getPageCount();
if( nPages > 0 )
{
OUStringBuffer aBuf( 32 );
aBuf.append( "1" );
if( nPages > 1 )
{
aBuf.append( "-" );
aBuf.append( nPages );
}
xController->setValue("PageRange", css::uno::makeAny(aBuf.makeStringAndClear()));
}
}
}
}
}
css::beans::PropertyValue* pReverseVal = xController->getValue(OUString("PrintReverse"));
if( pReverseVal )
{
bool bReverse = false;
pReverseVal->Value >>= bReverse;
xController->setReversePrint( bReverse );
}
css::beans::PropertyValue* pPapersizeFromSetupVal = xController->getValue(OUString("PapersizeFromSetup"));
if( pPapersizeFromSetupVal )
{
bool bPapersizeFromSetup = false;
pPapersizeFromSetupVal->Value >>= bPapersizeFromSetup;
xController->setPapersizeFromSetup(bPapersizeFromSetup);
}
// setup NUp printing from properties
sal_Int32 nRows = xController->getIntProperty("NUpRows", 1);
sal_Int32 nCols = xController->getIntProperty("NUpColumns", 1);
if( nRows > 1 || nCols > 1 )
{
PrinterController::MultiPageSetup aMPS;
aMPS.nRows = std::max<sal_Int32>(nRows, 1);
aMPS.nColumns = std::max<sal_Int32>(nCols, 1);
sal_Int32 nValue = xController->getIntProperty("NUpPageMarginLeft", aMPS.nLeftMargin);
if( nValue >= 0 )
aMPS.nLeftMargin = nValue;
nValue = xController->getIntProperty("NUpPageMarginRight", aMPS.nRightMargin);
if( nValue >= 0 )
aMPS.nRightMargin = nValue;
nValue = xController->getIntProperty( "NUpPageMarginTop", aMPS.nTopMargin );
if( nValue >= 0 )
aMPS.nTopMargin = nValue;
nValue = xController->getIntProperty( "NUpPageMarginBottom", aMPS.nBottomMargin );
if( nValue >= 0 )
aMPS.nBottomMargin = nValue;
nValue = xController->getIntProperty( "NUpHorizontalSpacing", aMPS.nHorizontalSpacing );
if( nValue >= 0 )
aMPS.nHorizontalSpacing = nValue;
nValue = xController->getIntProperty( "NUpVerticalSpacing", aMPS.nVerticalSpacing );
if( nValue >= 0 )
aMPS.nVerticalSpacing = nValue;
aMPS.bDrawBorder = xController->getBoolProperty( "NUpDrawBorder", aMPS.bDrawBorder );
aMPS.nOrder = static_cast<NupOrderType>(xController->getIntProperty( "NUpSubPageOrder", static_cast<sal_Int32>(aMPS.nOrder) ));
aMPS.aPaperSize = xController->getPrinter()->PixelToLogic( xController->getPrinter()->GetPaperSizePixel(), MapMode( MapUnit::Map100thMM ) );
css::beans::PropertyValue* pPgSizeVal = xController->getValue( OUString( "NUpPaperSize" ) );
css::awt::Size aSizeVal;
if( pPgSizeVal && (pPgSizeVal->Value >>= aSizeVal) )
{
aMPS.aPaperSize.setWidth( aSizeVal.Width );
aMPS.aPaperSize.setHeight( aSizeVal.Height );
}
xController->setMultipage( aMPS );
}
// in direct print case check whether there is anything to print.
// if not, show an errorbox (if appropriate)
if( xController->isShowDialogs() && xController->isDirectPrint() )
{
if( xController->getFilteredPageCount() == 0 )
{
VclPtr<vcl::Window> xParent = xController->getWindow();
std::unique_ptr<weld::Builder> xBuilder(Application::CreateBuilder(xParent ? xParent->GetFrameWeld() : nullptr, "vcl/ui/errornocontentdialog.ui"));
std::unique_ptr<weld::MessageDialog> xBox(xBuilder->weld_message_dialog("ErrorNoContentDialog"));
xBox->run();
return false;
}
}
// check if the printer brings up its own dialog
// in that case leave the work to that dialog
if( ! xController->getPrinter()->GetCapabilities( PrinterCapType::ExternalDialog ) &&
! xController->isDirectPrint() &&
xController->isShowDialogs()
)
{
try
{
VclPtr<vcl::Window> xParent = xController->getWindow();
ScopedVclPtrInstance< PrintDialog > aDlg( xParent, xController );
if( ! aDlg->Execute() )
{
xController->abortJob();
return false;
}
if( aDlg->isPrintToFile() )
{
OUString aFile = queryFile( xController->getPrinter().get() );
if( aFile.isEmpty() )
{
xController->abortJob();
return false;
}
xController->setValue( "LocalFileName",
css::uno::makeAny( aFile ) );
}
else if( aDlg->isSingleJobs() )
{
xController->setValue( "PrintCollateAsSingleJobs",
css::uno::makeAny( true ) );
}
}
catch (const std::bad_alloc&)
{
}
}
xController->pushPropertiesToPrinter();
return true;
}
bool Printer::ExecutePrintJob(const std::shared_ptr<PrinterController>& xController)
{
OUString aJobName;
css::beans::PropertyValue* pJobNameVal = xController->getValue( OUString( "JobName" ) );
if( pJobNameVal )
pJobNameVal->Value >>= aJobName;
return xController->getPrinter()->StartJob( aJobName, xController );
}
void Printer::FinishPrintJob(const std::shared_ptr<PrinterController>& xController)
{
xController->resetPaperToLastConfigured();
xController->jobFinished( xController->getJobState() );
}
void Printer::ImplPrintJob(const std::shared_ptr<PrinterController>& xController,
const JobSetup& i_rInitSetup)
{
if (PreparePrintJob(xController, i_rInitSetup))
{
ExecutePrintJob(xController);
}
FinishPrintJob(xController);
}
bool Printer::StartJob( const OUString& i_rJobName, std::shared_ptr<vcl::PrinterController> const & i_xController)
{
mnError = ERRCODE_NONE;
if ( IsDisplayPrinter() )
return false;
if ( IsJobActive() || IsPrinting() )
return false;
sal_uInt32 nCopies = mnCopyCount;
bool bCollateCopy = mbCollateCopy;
bool bUserCopy = false;
if ( nCopies > 1 )
{
const sal_uInt32 nDevCopy = GetCapabilities( bCollateCopy
? PrinterCapType::CollateCopies
: PrinterCapType::Copies );
// need to do copies by hand ?
if ( nCopies > nDevCopy )
{
bUserCopy = true;
nCopies = 1;
bCollateCopy = false;
}
}
else
bCollateCopy = false;
ImplSVData* pSVData = ImplGetSVData();
mpPrinter = pSVData->mpDefInst->CreatePrinter( mpInfoPrinter );
if (!mpPrinter)
return false;
bool bSinglePrintJobs = false;
css::beans::PropertyValue* pSingleValue = i_xController->getValue(OUString("PrintCollateAsSingleJobs"));
if( pSingleValue )
{
pSingleValue->Value >>= bSinglePrintJobs;
}
css::beans::PropertyValue* pFileValue = i_xController->getValue(OUString("LocalFileName"));
if( pFileValue )
{
OUString aFile;
pFileValue->Value >>= aFile;
if( !aFile.isEmpty() )
{
mbPrintFile = true;
maPrintFile = aFile;
bSinglePrintJobs = false;
}
}
OUString* pPrintFile = nullptr;
if ( mbPrintFile )
pPrintFile = &maPrintFile;
mpPrinterOptions->ReadFromConfig( mbPrintFile );
maJobName = i_rJobName;
mbPrinting = true;
if( GetCapabilities( PrinterCapType::UsePullModel ) )
{
mbJobActive = true;
// SAL layer does all necessary page printing
// and also handles showing a dialog
// that also means it must call jobStarted when the dialog is finished
// it also must set the JobState of the Controller
if( mpPrinter->StartJob( pPrintFile,
i_rJobName,
Application::GetDisplayName(),
&maJobSetup.ImplGetData(),
*i_xController) )
{
EndJob();
}
else
{
mnError = ImplSalPrinterErrorCodeToVCL(mpPrinter->GetErrorCode());
if ( !mnError )
mnError = PRINTER_GENERALERROR;
mbPrinting = false;
mpPrinter.reset();
mbJobActive = false;
GDIMetaFile aDummyFile;
i_xController->setLastPage(true);
i_xController->getFilteredPageFile(0, aDummyFile);
return false;
}
}
else
{
// possibly a dialog has been shown
// now the real job starts
i_xController->setJobState( css::view::PrintableState_JOB_STARTED );
i_xController->jobStarted();
int nJobs = 1;
int nOuterRepeatCount = 1;
int nInnerRepeatCount = 1;
if( bUserCopy )
{
if( mbCollateCopy )
nOuterRepeatCount = mnCopyCount;
else
nInnerRepeatCount = mnCopyCount;
}
if( bSinglePrintJobs )
{
nJobs = mnCopyCount;
nCopies = 1;
nOuterRepeatCount = nInnerRepeatCount = 1;
}
for( int nJobIteration = 0; nJobIteration < nJobs; nJobIteration++ )
{
bool bError = false;
if( mpPrinter->StartJob( pPrintFile,
i_rJobName,
Application::GetDisplayName(),
nCopies,
bCollateCopy,
i_xController->isDirectPrint(),
&maJobSetup.ImplGetData() ) )
{
bool bAborted = false;
mbJobActive = true;
i_xController->createProgressDialog();
const int nPages = i_xController->getFilteredPageCount();
// abort job, if no pages will be printed.
if ( nPages == 0 )
{
i_xController->abortJob();
bAborted = true;
}
for( int nOuterIteration = 0; nOuterIteration < nOuterRepeatCount && ! bAborted; nOuterIteration++ )
{
for( int nPage = 0; nPage < nPages && ! bAborted; nPage++ )
{
for( int nInnerIteration = 0; nInnerIteration < nInnerRepeatCount && ! bAborted; nInnerIteration++ )
{
if( nPage == nPages-1 &&
nOuterIteration == nOuterRepeatCount-1 &&
nInnerIteration == nInnerRepeatCount-1 &&
nJobIteration == nJobs-1 )
{
i_xController->setLastPage(true);
}
i_xController->printFilteredPage(nPage);
if (i_xController->isProgressCanceled())
{
i_xController->abortJob();
}
if (i_xController->getJobState() ==
css::view::PrintableState_JOB_ABORTED)
{
bAborted = true;
}
}
}
// FIXME: duplex ?
}
EndJob();
if( nJobIteration < nJobs-1 )
{
mpPrinter = pSVData->mpDefInst->CreatePrinter( mpInfoPrinter );
if ( mpPrinter )
{
maJobName = i_rJobName;
mbPrinting = true;
}
else
bError = true;
}
}
else
bError = true;
if( bError )
{
mnError = mpPrinter ? ImplSalPrinterErrorCodeToVCL(mpPrinter->GetErrorCode()) : ERRCODE_NONE;
if ( !mnError )
mnError = PRINTER_GENERALERROR;
i_xController->setJobState( mnError == PRINTER_ABORT
? css::view::PrintableState_JOB_ABORTED
: css::view::PrintableState_JOB_FAILED );
mbPrinting = false;
mpPrinter.reset();
return false;
}
}
if (i_xController->getJobState() == css::view::PrintableState_JOB_STARTED)
i_xController->setJobState(css::view::PrintableState_JOB_SPOOLED);
}
// make last used printer persistent for UI jobs
if (i_xController->isShowDialogs() && !i_xController->isDirectPrint())
{
SettingsConfigItem* pItem = SettingsConfigItem::get();
pItem->setValue( "PrintDialog",
"LastPrinterUsed",
GetName()
);
}
return true;
}
PrinterController::~PrinterController()
{
}
css::view::PrintableState PrinterController::getJobState() const
{
return mpImplData->meJobState;
}
void PrinterController::setJobState( css::view::PrintableState i_eState )
{
mpImplData->meJobState = i_eState;
}
const VclPtr<Printer>& PrinterController::getPrinter() const
{
return mpImplData->mxPrinter;
}
const VclPtr<vcl::Window>& PrinterController::getWindow() const
{
return mpImplData->mxWindow;
}
void PrinterController::setPrinter( const VclPtr<Printer>& i_rPrinter )
{
mpImplData->mxPrinter = i_rPrinter;
setValue( "Name",
css::uno::makeAny( i_rPrinter->GetName() ) );
mpImplData->mnDefaultPaperBin = mpImplData->mxPrinter->GetPaperBin();
mpImplData->mxPrinter->Push();
mpImplData->mxPrinter->SetMapMode(MapMode(MapUnit::Map100thMM));
mpImplData->maDefaultPageSize = mpImplData->mxPrinter->GetPaperSize();
mpImplData->mxPrinter->Pop();
mpImplData->mnFixedPaperBin = -1;
}
void PrinterController::resetPrinterOptions( bool i_bFileOutput )
{
PrinterOptions aOpt;
aOpt.ReadFromConfig( i_bFileOutput );
mpImplData->mxPrinter->SetPrinterOptions( aOpt );
}
void PrinterController::setupPrinter( weld::Window* i_pParent )
{
bool bRet = false;
// Important to hold printer alive while doing setup etc.
VclPtr< Printer > xPrinter = mpImplData->mxPrinter;
if( xPrinter.get() )
{
xPrinter->Push();
xPrinter->SetMapMode(MapMode(MapUnit::Map100thMM));
// get current data
Size aPaperSize(xPrinter->GetPaperSize());
sal_uInt16 nPaperBin = xPrinter->GetPaperBin();
// reset paper size back to last configured size, not
// whatever happens to be the current page
// (but only if the printer config has changed, otherwise
// don't override printer page auto-detection - tdf#91362)
if (getPrinterModified() || getPapersizeFromSetup())
{
resetPaperToLastConfigured();
}
// call driver setup
bRet = xPrinter->Setup( i_pParent, PrinterSetupMode::SingleJob );
SAL_WARN_IF(xPrinter != mpImplData->mxPrinter, "vcl.gdi",
"Printer changed underneath us during setup");
xPrinter = mpImplData->mxPrinter;
Size aNewPaperSize(xPrinter->GetPaperSize());
if (bRet)
{
bool bInvalidateCache = false;
setPapersizeFromSetup(xPrinter->GetPrinterSettingsPreferred());
// was papersize overridden ? if so we need to take action if we're
// configured to use the driver papersize
if (aNewPaperSize != mpImplData->maDefaultPageSize)
{
mpImplData->maDefaultPageSize = aNewPaperSize;
bInvalidateCache = getPapersizeFromSetup();
}
// was bin overridden ? if so we need to take action
sal_uInt16 nNewPaperBin = xPrinter->GetPaperBin();
if (nNewPaperBin != nPaperBin)
{
mpImplData->mnFixedPaperBin = nNewPaperBin;
bInvalidateCache = true;
}
if (bInvalidateCache)
{
mpImplData->maPageCache.invalidate();
}
}
else
{
//restore to whatever it was before we entered this method
if (aPaperSize != aNewPaperSize)
xPrinter->SetPaperSizeUser(aPaperSize, !mpImplData->isFixedPageSize());
}
xPrinter->Pop();
}
}
PrinterController::PageSize vcl::ImplPrinterControllerData::modifyJobSetup( const css::uno::Sequence< css::beans::PropertyValue >& i_rProps )
{
PrinterController::PageSize aPageSize;
aPageSize.aSize = mxPrinter->GetPaperSize();
css::awt::Size aSetSize, aIsSize;
sal_Int32 nPaperBin = mnDefaultPaperBin;
for( sal_Int32 nProperty = 0, nPropertyCount = i_rProps.getLength(); nProperty < nPropertyCount; ++nProperty )
{
if ( i_rProps[ nProperty ].Name == "PreferredPageSize" )
{
i_rProps[ nProperty ].Value >>= aSetSize;
}
else if ( i_rProps[ nProperty ].Name == "PageSize" )
{
i_rProps[ nProperty ].Value >>= aIsSize;
}
else if ( i_rProps[ nProperty ].Name == "PageIncludesNonprintableArea" )
{
bool bVal = false;
i_rProps[ nProperty ].Value >>= bVal;
aPageSize.bFullPaper = bVal;
}
else if ( i_rProps[ nProperty ].Name == "PrinterPaperTray" )
{
sal_Int32 nBin = -1;
i_rProps[ nProperty ].Value >>= nBin;
if( nBin >= 0 && nBin < static_cast<sal_Int32>(mxPrinter->GetPaperBinCount()) )
nPaperBin = nBin;
}
}
Size aCurSize( mxPrinter->GetPaperSize() );
if( aSetSize.Width && aSetSize.Height )
{
Size aSetPaperSize( aSetSize.Width, aSetSize.Height );
Size aRealPaperSize( getRealPaperSize( aSetPaperSize, true/*bNoNUP*/ ) );
if( aRealPaperSize != aCurSize )
aIsSize = aSetSize;
}
if( aIsSize.Width && aIsSize.Height )
{
aPageSize.aSize.setWidth( aIsSize.Width );
aPageSize.aSize.setHeight( aIsSize.Height );
Size aRealPaperSize( getRealPaperSize( aPageSize.aSize, true/*bNoNUP*/ ) );
if( aRealPaperSize != aCurSize )
mxPrinter->SetPaperSizeUser( aRealPaperSize, ! isFixedPageSize() );
}
// paper bin set from properties in print dialog overrides
// application default for a page
if ( mnFixedPaperBin != -1 )
nPaperBin = mnFixedPaperBin;
if( nPaperBin != -1 && nPaperBin != mxPrinter->GetPaperBin() )
mxPrinter->SetPaperBin( nPaperBin );
return aPageSize;
}
//fdo#61886
//when printing is finished, set the paper size of the printer to either what
//the user explicitly set as the desired paper size, or fallback to whatever
//the printer had before printing started. That way it doesn't contain the last
//paper size of a multiple paper size using document when we are in our normal
//auto accept document paper size mode and end up overwriting the original
//paper size setting for file->printer_settings just by pressing "ok" in the
//print dialog
void vcl::ImplPrinterControllerData::resetPaperToLastConfigured()
{
mxPrinter->Push();
mxPrinter->SetMapMode(MapMode(MapUnit::Map100thMM));
Size aCurSize(mxPrinter->GetPaperSize());
if (aCurSize != maDefaultPageSize)
mxPrinter->SetPaperSizeUser(maDefaultPageSize, !isFixedPageSize());
mxPrinter->Pop();
}
int PrinterController::getPageCountProtected() const
{
const MapMode aMapMode( MapUnit::Map100thMM );
mpImplData->mxPrinter->Push();
mpImplData->mxPrinter->SetMapMode( aMapMode );
int nPages = getPageCount();
mpImplData->mxPrinter->Pop();
return nPages;
}
css::uno::Sequence< css::beans::PropertyValue > PrinterController::getPageParametersProtected( int i_nPage ) const
{
const MapMode aMapMode( MapUnit::Map100thMM );
mpImplData->mxPrinter->Push();
mpImplData->mxPrinter->SetMapMode( aMapMode );
css::uno::Sequence< css::beans::PropertyValue > aResult( getPageParameters( i_nPage ) );
mpImplData->mxPrinter->Pop();
return aResult;
}
PrinterController::PageSize PrinterController::getPageFile( int i_nUnfilteredPage, GDIMetaFile& o_rMtf, bool i_bMayUseCache )
{
// update progress if necessary
if( mpImplData->mpProgress )
{
// do nothing if printing is canceled
if( mpImplData->mpProgress->isCanceled() )
return PrinterController::PageSize();
mpImplData->mpProgress->tick();
Application::Reschedule( true );
}
if( i_bMayUseCache )
{
PrinterController::PageSize aPageSize;
if( mpImplData->maPageCache.get( i_nUnfilteredPage, o_rMtf, aPageSize ) )
{
return aPageSize;
}
}
else
mpImplData->maPageCache.invalidate();
o_rMtf.Clear();
// get page parameters
css::uno::Sequence< css::beans::PropertyValue > aPageParm( getPageParametersProtected( i_nUnfilteredPage ) );
const MapMode aMapMode( MapUnit::Map100thMM );
mpImplData->mxPrinter->Push();
mpImplData->mxPrinter->SetMapMode( aMapMode );
// modify job setup if necessary
PrinterController::PageSize aPageSize = mpImplData->modifyJobSetup( aPageParm );
o_rMtf.SetPrefSize( aPageSize.aSize );
o_rMtf.SetPrefMapMode( aMapMode );
mpImplData->mxPrinter->EnableOutput( false );
o_rMtf.Record( mpImplData->mxPrinter.get() );
printPage( i_nUnfilteredPage );
o_rMtf.Stop();
o_rMtf.WindStart();
mpImplData->mxPrinter->Pop();
if( i_bMayUseCache )
mpImplData->maPageCache.insert( i_nUnfilteredPage, o_rMtf, aPageSize );
// reset "FirstPage" property to false now we've gotten at least our first one
mpImplData->mbFirstPage = false;
return aPageSize;
}
static void appendSubPage( GDIMetaFile& o_rMtf, const tools::Rectangle& i_rClipRect, GDIMetaFile& io_rSubPage, bool i_bDrawBorder )
{
// intersect all clipregion actions with our clip rect
io_rSubPage.WindStart();
io_rSubPage.Clip( i_rClipRect );
// save gstate
o_rMtf.AddAction( new MetaPushAction( PushFlags::ALL ) );
// clip to page rect
o_rMtf.AddAction( new MetaClipRegionAction( vcl::Region( i_rClipRect ), true ) );
// append the subpage
io_rSubPage.WindStart();
io_rSubPage.Play( o_rMtf );
// restore gstate
o_rMtf.AddAction( new MetaPopAction() );
// draw a border
if( i_bDrawBorder )
{
// save gstate
o_rMtf.AddAction( new MetaPushAction( PushFlags::LINECOLOR | PushFlags::FILLCOLOR | PushFlags::CLIPREGION | PushFlags::MAPMODE ) );
o_rMtf.AddAction( new MetaMapModeAction( MapMode( MapUnit::Map100thMM ) ) );
tools::Rectangle aBorderRect( i_rClipRect );
o_rMtf.AddAction( new MetaLineColorAction( COL_BLACK, true ) );
o_rMtf.AddAction( new MetaFillColorAction( COL_TRANSPARENT, false ) );
o_rMtf.AddAction( new MetaRectAction( aBorderRect ) );
// restore gstate
o_rMtf.AddAction( new MetaPopAction() );
}
}
PrinterController::PageSize PrinterController::getFilteredPageFile( int i_nFilteredPage, GDIMetaFile& o_rMtf, bool i_bMayUseCache )
{
const MultiPageSetup& rMPS( mpImplData->maMultiPage );
int nSubPages = rMPS.nRows * rMPS.nColumns;
if( nSubPages < 1 )
nSubPages = 1;
// reverse sheet order
if( mpImplData->mbReversePageOrder )
{
int nDocPages = getFilteredPageCount();
i_nFilteredPage = nDocPages - 1 - i_nFilteredPage;
}
// there is no filtering to be done (and possibly the page size of the
// original page is to be set), when N-Up is "neutral" that is there is
// only one subpage and the margins are 0
if( nSubPages == 1 &&
rMPS.nLeftMargin == 0 && rMPS.nRightMargin == 0 &&
rMPS.nTopMargin == 0 && rMPS.nBottomMargin == 0 )
{
PrinterController::PageSize aPageSize = getPageFile( i_nFilteredPage, o_rMtf, i_bMayUseCache );
if (mpImplData->meJobState != css::view::PrintableState_JOB_STARTED)
{ // rhbz#657394: check that we are still printing...
return PrinterController::PageSize();
}
Size aPaperSize = mpImplData->getRealPaperSize( aPageSize.aSize, true );
mpImplData->mxPrinter->SetMapMode( MapMode( MapUnit::Map100thMM ) );
mpImplData->mxPrinter->SetPaperSizeUser( aPaperSize, ! mpImplData->isFixedPageSize() );
if( aPaperSize != aPageSize.aSize )
{
// user overridden page size, center Metafile
o_rMtf.WindStart();
long nDX = (aPaperSize.Width() - aPageSize.aSize.Width()) / 2;
long nDY = (aPaperSize.Height() - aPageSize.aSize.Height()) / 2;
o_rMtf.Move( nDX, nDY, mpImplData->mxPrinter->GetDPIX(), mpImplData->mxPrinter->GetDPIY() );
o_rMtf.WindStart();
o_rMtf.SetPrefSize( aPaperSize );
aPageSize.aSize = aPaperSize;
}
return aPageSize;
}
// set last page property really only on the very last page to be rendered
// that is on the last subpage of a NUp run
bool bIsLastPage = mpImplData->mbLastPage;
mpImplData->mbLastPage = false;
Size aPaperSize( mpImplData->getRealPaperSize( mpImplData->maMultiPage.aPaperSize, false ) );
// multi page area: page size minus margins + one time spacing right and down
// the added spacing is so each subpage can be calculated including its spacing
Size aMPArea( aPaperSize );
aMPArea.AdjustWidth( -(rMPS.nLeftMargin + rMPS.nRightMargin) );
aMPArea.AdjustWidth(rMPS.nHorizontalSpacing );
aMPArea.AdjustHeight( -(rMPS.nTopMargin + rMPS.nBottomMargin) );
aMPArea.AdjustHeight(rMPS.nVerticalSpacing );
// determine offsets
long nAdvX = aMPArea.Width() / rMPS.nColumns;
long nAdvY = aMPArea.Height() / rMPS.nRows;
// determine size of a "cell" subpage, leave a little space around pages
Size aSubPageSize( nAdvX - rMPS.nHorizontalSpacing, nAdvY - rMPS.nVerticalSpacing );
o_rMtf.Clear();
o_rMtf.SetPrefSize( aPaperSize );
o_rMtf.SetPrefMapMode( MapMode( MapUnit::Map100thMM ) );
o_rMtf.AddAction( new MetaMapModeAction( MapMode( MapUnit::Map100thMM ) ) );
int nDocPages = getPageCountProtected();
if (mpImplData->meJobState != css::view::PrintableState_JOB_STARTED)
{ // rhbz#657394: check that we are still printing...
return PrinterController::PageSize();
}
for( int nSubPage = 0; nSubPage < nSubPages; nSubPage++ )
{
// map current sub page to real page
int nPage = i_nFilteredPage * nSubPages + nSubPage;
if( nSubPage == nSubPages-1 ||
nPage == nDocPages-1 )
{
mpImplData->mbLastPage = bIsLastPage;
}
if( nPage >= 0 && nPage < nDocPages )
{
GDIMetaFile aPageFile;
PrinterController::PageSize aPageSize = getPageFile( nPage, aPageFile, i_bMayUseCache );
if( aPageSize.aSize.Width() && aPageSize.aSize.Height() )
{
long nCellX = 0, nCellY = 0;
switch( rMPS.nOrder )
{
case NupOrderType::LRTB:
nCellX = (nSubPage % rMPS.nColumns);
nCellY = (nSubPage / rMPS.nColumns);
break;
case NupOrderType::TBLR:
nCellX = (nSubPage / rMPS.nRows);
nCellY = (nSubPage % rMPS.nRows);
break;
case NupOrderType::RLTB:
nCellX = rMPS.nColumns - 1 - (nSubPage % rMPS.nColumns);
nCellY = (nSubPage / rMPS.nColumns);
break;
case NupOrderType::TBRL:
nCellX = rMPS.nColumns - 1 - (nSubPage / rMPS.nRows);
nCellY = (nSubPage % rMPS.nRows);
break;
}
// scale the metafile down to a sub page size
double fScaleX = double(aSubPageSize.Width())/double(aPageSize.aSize.Width());
double fScaleY = double(aSubPageSize.Height())/double(aPageSize.aSize.Height());
double fScale = std::min( fScaleX, fScaleY );
aPageFile.Scale( fScale, fScale );
aPageFile.WindStart();
// move the subpage so it is centered in its "cell"
long nOffX = (aSubPageSize.Width() - long(double(aPageSize.aSize.Width()) * fScale)) / 2;
long nOffY = (aSubPageSize.Height() - long(double(aPageSize.aSize.Height()) * fScale)) / 2;
long nX = rMPS.nLeftMargin + nOffX + nAdvX * nCellX;
long nY = rMPS.nTopMargin + nOffY + nAdvY * nCellY;
aPageFile.Move( nX, nY, mpImplData->mxPrinter->GetDPIX(), mpImplData->mxPrinter->GetDPIY() );
aPageFile.WindStart();
// calculate border rectangle
tools::Rectangle aSubPageRect( Point( nX, nY ),
Size( long(double(aPageSize.aSize.Width())*fScale),
long(double(aPageSize.aSize.Height())*fScale) ) );
// append subpage to page
appendSubPage( o_rMtf, aSubPageRect, aPageFile, rMPS.bDrawBorder );
}
}
}
o_rMtf.WindStart();
// subsequent getPageFile calls have changed the paper, reset it to current value
mpImplData->mxPrinter->SetMapMode( MapMode( MapUnit::Map100thMM ) );
mpImplData->mxPrinter->SetPaperSizeUser( aPaperSize, ! mpImplData->isFixedPageSize() );
return PrinterController::PageSize( aPaperSize, true );
}
int PrinterController::getFilteredPageCount()
{
int nDiv = mpImplData->maMultiPage.nRows * mpImplData->maMultiPage.nColumns;
if( nDiv < 1 )
nDiv = 1;
return (getPageCountProtected() + (nDiv-1)) / nDiv;
}
DrawModeFlags PrinterController::removeTransparencies( GDIMetaFile const & i_rIn, GDIMetaFile& o_rOut )
{
DrawModeFlags nRestoreDrawMode = mpImplData->mxPrinter->GetDrawMode();
sal_Int32 nMaxBmpDPIX = mpImplData->mxPrinter->GetDPIX();
sal_Int32 nMaxBmpDPIY = mpImplData->mxPrinter->GetDPIY();
const PrinterOptions& rPrinterOptions = mpImplData->mxPrinter->GetPrinterOptions();
static const sal_Int32 OPTIMAL_BMP_RESOLUTION = 300;
static const sal_Int32 NORMAL_BMP_RESOLUTION = 200;
if( rPrinterOptions.IsReduceBitmaps() )
{
// calculate maximum resolution for bitmap graphics
if( PrinterBitmapMode::Optimal == rPrinterOptions.GetReducedBitmapMode() )
{
nMaxBmpDPIX = std::min( sal_Int32(OPTIMAL_BMP_RESOLUTION), nMaxBmpDPIX );
nMaxBmpDPIY = std::min( sal_Int32(OPTIMAL_BMP_RESOLUTION), nMaxBmpDPIY );
}
else if( PrinterBitmapMode::Normal == rPrinterOptions.GetReducedBitmapMode() )
{
nMaxBmpDPIX = std::min( sal_Int32(NORMAL_BMP_RESOLUTION), nMaxBmpDPIX );
nMaxBmpDPIY = std::min( sal_Int32(NORMAL_BMP_RESOLUTION), nMaxBmpDPIY );
}
else
{
nMaxBmpDPIX = std::min( sal_Int32(rPrinterOptions.GetReducedBitmapResolution()), nMaxBmpDPIX );
nMaxBmpDPIY = std::min( sal_Int32(rPrinterOptions.GetReducedBitmapResolution()), nMaxBmpDPIY );
}
}
// convert to greyscales
if( rPrinterOptions.IsConvertToGreyscales() )
{
mpImplData->mxPrinter->SetDrawMode( mpImplData->mxPrinter->GetDrawMode() |
( DrawModeFlags::GrayLine | DrawModeFlags::GrayFill | DrawModeFlags::GrayText |
DrawModeFlags::GrayBitmap | DrawModeFlags::GrayGradient ) );
}
// disable transparency output
if( rPrinterOptions.IsReduceTransparency() && ( PrinterTransparencyMode::NONE == rPrinterOptions.GetReducedTransparencyMode() ) )
{
mpImplData->mxPrinter->SetDrawMode( mpImplData->mxPrinter->GetDrawMode() | DrawModeFlags::NoTransparency );
}
Color aBg( COL_TRANSPARENT ); // default: let RemoveTransparenciesFromMetaFile do its own background logic
if( mpImplData->maMultiPage.nRows * mpImplData->maMultiPage.nColumns > 1 )
{
// in N-Up printing we have no "page" background operation
// we also have no way to determine the paper color
// so let's go for white, which will kill 99.9% of the real cases
aBg = COL_WHITE;
}
mpImplData->mxPrinter->RemoveTransparenciesFromMetaFile( i_rIn, o_rOut, nMaxBmpDPIX, nMaxBmpDPIY,
rPrinterOptions.IsReduceTransparency(),
rPrinterOptions.GetReducedTransparencyMode() == PrinterTransparencyMode::Auto,
rPrinterOptions.IsReduceBitmaps() && rPrinterOptions.IsReducedBitmapIncludesTransparency(),
aBg
);
return nRestoreDrawMode;
}
void PrinterController::printFilteredPage( int i_nPage )
{
if( mpImplData->meJobState != css::view::PrintableState_JOB_STARTED )
return; // rhbz#657394: check that we are still printing...
GDIMetaFile aPageFile;
PrinterController::PageSize aPageSize = getFilteredPageFile( i_nPage, aPageFile );
if( mpImplData->mpProgress )
{
// do nothing if printing is canceled
if( mpImplData->mpProgress->isCanceled() )
{
setJobState( css::view::PrintableState_JOB_ABORTED );
return;
}
}
// in N-Up printing set the correct page size
mpImplData->mxPrinter->SetMapMode(MapMode(MapUnit::Map100thMM));
// aPageSize was filtered through mpImplData->getRealPaperSize already by getFilteredPageFile()
mpImplData->mxPrinter->SetPaperSizeUser( aPageSize.aSize, ! mpImplData->isFixedPageSize() );
if( mpImplData->mnFixedPaperBin != -1 &&
mpImplData->mxPrinter->GetPaperBin() != mpImplData->mnFixedPaperBin )
{
mpImplData->mxPrinter->SetPaperBin( mpImplData->mnFixedPaperBin );
}
// if full paper is meant to be used, move the output to accommodate for pageoffset
if( aPageSize.bFullPaper )
{
Point aPageOffset( mpImplData->mxPrinter->GetPageOffset() );
aPageFile.WindStart();
aPageFile.Move( -aPageOffset.X(), -aPageOffset.Y(), mpImplData->mxPrinter->GetDPIX(), mpImplData->mxPrinter->GetDPIY() );
}
GDIMetaFile aCleanedFile;
DrawModeFlags nRestoreDrawMode = removeTransparencies( aPageFile, aCleanedFile );
mpImplData->mxPrinter->EnableOutput();
// actually print the page
mpImplData->mxPrinter->ImplStartPage();
mpImplData->mxPrinter->Push();
aCleanedFile.WindStart();
aCleanedFile.Play( mpImplData->mxPrinter.get() );
mpImplData->mxPrinter->Pop();
mpImplData->mxPrinter->ImplEndPage();
mpImplData->mxPrinter->SetDrawMode( nRestoreDrawMode );
}
void PrinterController::jobStarted()
{
}
void PrinterController::jobFinished( css::view::PrintableState )
{
}
void PrinterController::abortJob()
{
setJobState( css::view::PrintableState_JOB_ABORTED );
// applications (well, sw) depend on a page request with "IsLastPage" = true
// to free resources, else they (well, sw) will crash eventually
setLastPage( true );
mpImplData->mpProgress.disposeAndClear();
GDIMetaFile aMtf;
getPageFile( 0, aMtf );
}
void PrinterController::setLastPage( bool i_bLastPage )
{
mpImplData->mbLastPage = i_bLastPage;
}
void PrinterController::setReversePrint( bool i_bReverse )
{
mpImplData->mbReversePageOrder = i_bReverse;
}
bool PrinterController::getReversePrint() const
{
return mpImplData->mbReversePageOrder;
}
void PrinterController::setPapersizeFromSetup( bool i_bPapersizeFromSetup )
{
mpImplData->mbPapersizeFromSetup = i_bPapersizeFromSetup;
mpImplData->mxPrinter->SetPrinterSettingsPreferred( i_bPapersizeFromSetup );
}
bool PrinterController::getPapersizeFromSetup() const
{
return mpImplData->mbPapersizeFromSetup;
}
void PrinterController::setPrinterModified( bool i_bPrinterModified )
{
mpImplData->mbPrinterModified = i_bPrinterModified;
}
bool PrinterController::getPrinterModified() const
{
return mpImplData->mbPrinterModified;
}
css::uno::Sequence< css::beans::PropertyValue > PrinterController::getJobProperties( const css::uno::Sequence< css::beans::PropertyValue >& i_rMergeList ) const
{
std::unordered_set< OUString > aMergeSet;
size_t nResultLen = size_t(i_rMergeList.getLength()) + mpImplData->maUIProperties.size() + 3;
for( int i = 0; i < i_rMergeList.getLength(); i++ )
aMergeSet.insert( i_rMergeList[i].Name );
css::uno::Sequence< css::beans::PropertyValue > aResult( nResultLen );
for( int i = 0; i < i_rMergeList.getLength(); i++ )
aResult[i] = i_rMergeList[i];
int nCur = i_rMergeList.getLength();
for(css::beans::PropertyValue & rPropVal : mpImplData->maUIProperties)
{
if( aMergeSet.find( rPropVal.Name ) == aMergeSet.end() )
aResult[nCur++] = rPropVal;
}
// append IsFirstPage
if( aMergeSet.find( OUString( "IsFirstPage" ) ) == aMergeSet.end() )
{
css::beans::PropertyValue aVal;
aVal.Name = "IsFirstPage";
aVal.Value <<= mpImplData->mbFirstPage;
aResult[nCur++] = aVal;
}
// append IsLastPage
if( aMergeSet.find( OUString( "IsLastPage" ) ) == aMergeSet.end() )
{
css::beans::PropertyValue aVal;
aVal.Name = "IsLastPage";
aVal.Value <<= mpImplData->mbLastPage;
aResult[nCur++] = aVal;
}
// append IsPrinter
if( aMergeSet.find( OUString( "IsPrinter" ) ) == aMergeSet.end() )
{
css::beans::PropertyValue aVal;
aVal.Name = "IsPrinter";
aVal.Value <<= true;
aResult[nCur++] = aVal;
}
aResult.realloc( nCur );
return aResult;
}
const css::uno::Sequence< css::beans::PropertyValue >& PrinterController::getUIOptions() const
{
return mpImplData->maUIOptions;
}
css::beans::PropertyValue* PrinterController::getValue( const OUString& i_rProperty )
{
std::unordered_map< OUString, size_t >::const_iterator it =
mpImplData->maPropertyToIndex.find( i_rProperty );
return it != mpImplData->maPropertyToIndex.end() ? &mpImplData->maUIProperties[it->second] : nullptr;
}
const css::beans::PropertyValue* PrinterController::getValue( const OUString& i_rProperty ) const
{
std::unordered_map< OUString, size_t >::const_iterator it =
mpImplData->maPropertyToIndex.find( i_rProperty );
return it != mpImplData->maPropertyToIndex.end() ? &mpImplData->maUIProperties[it->second] : nullptr;
}
void PrinterController::setValue( const OUString& i_rPropertyName, const css::uno::Any& i_rValue )
{
css::beans::PropertyValue aVal;
aVal.Name = i_rPropertyName;
aVal.Value = i_rValue;
setValue( aVal );
}
void PrinterController::setValue( const css::beans::PropertyValue& i_rPropertyValue )
{
std::unordered_map< OUString, size_t >::const_iterator it =
mpImplData->maPropertyToIndex.find( i_rPropertyValue.Name );
if( it != mpImplData->maPropertyToIndex.end() )
mpImplData->maUIProperties[ it->second ] = i_rPropertyValue;
else
{
// insert correct index into property map
mpImplData->maPropertyToIndex[ i_rPropertyValue.Name ] = mpImplData->maUIProperties.size();
mpImplData->maUIProperties.push_back( i_rPropertyValue );
mpImplData->maUIPropertyEnabled.push_back( true );
}
}
void PrinterController::setUIOptions( const css::uno::Sequence< css::beans::PropertyValue >& i_rOptions )
{
SAL_WARN_IF( mpImplData->maUIOptions.getLength() != 0, "vcl.gdi", "setUIOptions called twice !" );
mpImplData->maUIOptions = i_rOptions;
for( int i = 0; i < i_rOptions.getLength(); i++ )
{
css::uno::Sequence< css::beans::PropertyValue > aOptProp;
i_rOptions[i].Value >>= aOptProp;
bool bIsEnabled = true;
bool bHaveProperty = false;
OUString aPropName;
vcl::ImplPrinterControllerData::ControlDependency aDep;
css::uno::Sequence< sal_Bool > aChoicesDisabled;
for( int n = 0; n < aOptProp.getLength(); n++ )
{
const css::beans::PropertyValue& rEntry( aOptProp[ n ] );
if ( rEntry.Name == "Property" )
{
css::beans::PropertyValue aVal;
rEntry.Value >>= aVal;
DBG_ASSERT( mpImplData->maPropertyToIndex.find( aVal.Name )
== mpImplData->maPropertyToIndex.end(), "duplicate property entry" );
setValue( aVal );
aPropName = aVal.Name;
bHaveProperty = true;
}
else if ( rEntry.Name == "Enabled" )
{
bool bValue = true;
rEntry.Value >>= bValue;
bIsEnabled = bValue;
}
else if ( rEntry.Name == "DependsOnName" )
{
rEntry.Value >>= aDep.maDependsOnName;
}
else if ( rEntry.Name == "DependsOnEntry" )
{
rEntry.Value >>= aDep.mnDependsOnEntry;
}
else if ( rEntry.Name == "ChoicesDisabled" )
{
rEntry.Value >>= aChoicesDisabled;
}
}
if( bHaveProperty )
{
vcl::ImplPrinterControllerData::PropertyToIndexMap::const_iterator it =
mpImplData->maPropertyToIndex.find( aPropName );
// sanity check
if( it != mpImplData->maPropertyToIndex.end() )
{
mpImplData->maUIPropertyEnabled[ it->second ] = bIsEnabled;
}
if( !aDep.maDependsOnName.isEmpty() )
mpImplData->maControlDependencies[ aPropName ] = aDep;
if( aChoicesDisabled.getLength() > 0 )
mpImplData->maChoiceDisableMap[ aPropName ] = aChoicesDisabled;
}
}
}
bool PrinterController::isUIOptionEnabled( const OUString& i_rProperty ) const
{
bool bEnabled = false;
std::unordered_map< OUString, size_t >::const_iterator prop_it =
mpImplData->maPropertyToIndex.find( i_rProperty );
if( prop_it != mpImplData->maPropertyToIndex.end() )
{
bEnabled = mpImplData->maUIPropertyEnabled[prop_it->second];
if( bEnabled )
{
// check control dependencies
vcl::ImplPrinterControllerData::ControlDependencyMap::const_iterator it =
mpImplData->maControlDependencies.find( i_rProperty );
if( it != mpImplData->maControlDependencies.end() )
{
// check if the dependency is enabled
// if the dependency is disabled, we are too
bEnabled = isUIOptionEnabled( it->second.maDependsOnName );
if( bEnabled )
{
// does the dependency have the correct value ?
const css::beans::PropertyValue* pVal = getValue( it->second.maDependsOnName );
OSL_ENSURE( pVal, "unknown property in dependency" );
if( pVal )
{
sal_Int32 nDepVal = 0;
bool bDepVal = false;
if( pVal->Value >>= nDepVal )
{
bEnabled = (nDepVal == it->second.mnDependsOnEntry) || (it->second.mnDependsOnEntry == -1);
}
else if( pVal->Value >>= bDepVal )
{
// could be a dependency on a checked boolean
// in this case the dependency is on a non zero for checked value
bEnabled = ( bDepVal && it->second.mnDependsOnEntry != 0) ||
( ! bDepVal && it->second.mnDependsOnEntry == 0);
}
else
{
// if the type does not match something is awry
OSL_FAIL( "strange type in control dependency" );
bEnabled = false;
}
}
}
}
}
}
return bEnabled;
}
bool PrinterController::isUIChoiceEnabled( const OUString& i_rProperty, sal_Int32 i_nValue ) const
{
bool bEnabled = true;
ImplPrinterControllerData::ChoiceDisableMap::const_iterator it =
mpImplData->maChoiceDisableMap.find( i_rProperty );
if(it != mpImplData->maChoiceDisableMap.end() )
{
const css::uno::Sequence< sal_Bool >& rDisabled( it->second );
if( i_nValue >= 0 && i_nValue < rDisabled.getLength() )
bEnabled = ! rDisabled[i_nValue];
}
return bEnabled;
}
OUString PrinterController::getDependency( const OUString& i_rProperty ) const
{
OUString aDependency;
vcl::ImplPrinterControllerData::ControlDependencyMap::const_iterator it =
mpImplData->maControlDependencies.find( i_rProperty );
if( it != mpImplData->maControlDependencies.end() )
aDependency = it->second.maDependsOnName;
return aDependency;
}
OUString PrinterController::makeEnabled( const OUString& i_rProperty )
{
OUString aDependency;
vcl::ImplPrinterControllerData::ControlDependencyMap::const_iterator it =
mpImplData->maControlDependencies.find( i_rProperty );
if( it != mpImplData->maControlDependencies.end() )
{
if( isUIOptionEnabled( it->second.maDependsOnName ) )
{
aDependency = it->second.maDependsOnName;
const css::beans::PropertyValue* pVal = getValue( aDependency );
OSL_ENSURE( pVal, "unknown property in dependency" );
if( pVal )
{
sal_Int32 nDepVal = 0;
bool bDepVal = false;
if( pVal->Value >>= nDepVal )
{
if( it->second.mnDependsOnEntry != -1 )
{
setValue( aDependency, css::uno::makeAny( sal_Int32( it->second.mnDependsOnEntry ) ) );
}
}
else if( pVal->Value >>= bDepVal )
{
setValue( aDependency, css::uno::makeAny( it->second.mnDependsOnEntry != 0 ) );
}
else
{
// if the type does not match something is awry
OSL_FAIL( "strange type in control dependency" );
}
}
}
}
return aDependency;
}
void PrinterController::createProgressDialog()
{
if( ! mpImplData->mpProgress )
{
bool bShow = true;
css::beans::PropertyValue* pMonitor = getValue( OUString( "MonitorVisible" ) );
if( pMonitor )
pMonitor->Value >>= bShow;
else
{
const css::beans::PropertyValue* pVal = getValue( OUString( "IsApi" ) );
if( pVal )
{
bool bApi = false;
pVal->Value >>= bApi;
bShow = ! bApi;
}
}
if( bShow && ! Application::IsHeadlessModeEnabled() )
{
mpImplData->mpProgress = VclPtr<PrintProgressDialog>::Create( nullptr, getPageCountProtected() );
mpImplData->mpProgress->Show();
}
}
else
mpImplData->mpProgress->reset();
}
bool PrinterController::isProgressCanceled() const
{
return mpImplData->mpProgress && mpImplData->mpProgress->isCanceled();
}
void PrinterController::setMultipage( const MultiPageSetup& i_rMPS )
{
mpImplData->maMultiPage = i_rMPS;
}
const PrinterController::MultiPageSetup& PrinterController::getMultipage() const
{
return mpImplData->maMultiPage;
}
void PrinterController::resetPaperToLastConfigured()
{
mpImplData->resetPaperToLastConfigured();
}
void PrinterController::pushPropertiesToPrinter()
{
sal_Int32 nCopyCount = 1;
// set copycount and collate
const css::beans::PropertyValue* pVal = getValue( OUString( "CopyCount" ) );
if( pVal )
pVal->Value >>= nCopyCount;
bool bCollate = false;
pVal = getValue( OUString( "Collate" ) );
if( pVal )
pVal->Value >>= bCollate;
mpImplData->mxPrinter->SetCopyCount( static_cast<sal_uInt16>(nCopyCount), bCollate );
// duplex mode
pVal = getValue( OUString( "DuplexMode" ) );
if( pVal )
{
sal_Int16 nDuplex = css::view::DuplexMode::UNKNOWN;
pVal->Value >>= nDuplex;
switch( nDuplex )
{
case css::view::DuplexMode::OFF: mpImplData->mxPrinter->SetDuplexMode( DuplexMode::Off ); break;
case css::view::DuplexMode::LONGEDGE: mpImplData->mxPrinter->SetDuplexMode( DuplexMode::LongEdge ); break;
case css::view::DuplexMode::SHORTEDGE: mpImplData->mxPrinter->SetDuplexMode( DuplexMode::ShortEdge ); break;
}
}
}
bool PrinterController::isShowDialogs() const
{
bool bApi = getBoolProperty( "IsApi", false );
return ! bApi && ! Application::IsHeadlessModeEnabled();
}
bool PrinterController::isDirectPrint() const
{
bool bDirect = getBoolProperty( "IsDirect", false );
return bDirect;
}
bool PrinterController::getBoolProperty( const OUString& i_rProperty, bool i_bFallback ) const
{
bool bRet = i_bFallback;
const css::beans::PropertyValue* pVal = getValue( i_rProperty );
if( pVal )
pVal->Value >>= bRet;
return bRet;
}
sal_Int32 PrinterController::getIntProperty( const OUString& i_rProperty, sal_Int32 i_nFallback ) const
{
sal_Int32 nRet = i_nFallback;
const css::beans::PropertyValue* pVal = getValue( i_rProperty );
if( pVal )
pVal->Value >>= nRet;
return nRet;
}
/*
* PrinterOptionsHelper
**/
css::uno::Any PrinterOptionsHelper::getValue( const OUString& i_rPropertyName ) const
{
css::uno::Any aRet;
std::unordered_map< OUString, css::uno::Any >::const_iterator it =
m_aPropertyMap.find( i_rPropertyName );
if( it != m_aPropertyMap.end() )
aRet = it->second;
return aRet;
}
bool PrinterOptionsHelper::getBoolValue( const OUString& i_rPropertyName, bool i_bDefault ) const
{
bool bRet = false;
css::uno::Any aVal( getValue( i_rPropertyName ) );
return (aVal >>= bRet) ? bRet : i_bDefault;
}
sal_Int64 PrinterOptionsHelper::getIntValue( const OUString& i_rPropertyName, sal_Int64 i_nDefault ) const
{
sal_Int64 nRet = 0;
css::uno::Any aVal( getValue( i_rPropertyName ) );
return (aVal >>= nRet) ? nRet : i_nDefault;
}
OUString PrinterOptionsHelper::getStringValue( const OUString& i_rPropertyName ) const
{
OUString aRet;
css::uno::Any aVal( getValue( i_rPropertyName ) );
return (aVal >>= aRet) ? aRet : OUString();
}
bool PrinterOptionsHelper::processProperties( const css::uno::Sequence< css::beans::PropertyValue >& i_rNewProp )
{
bool bChanged = false;
sal_Int32 nElements = i_rNewProp.getLength();
const css::beans::PropertyValue* pVals = i_rNewProp.getConstArray();
for( sal_Int32 i = 0; i < nElements; i++ )
{
bool bElementChanged = false;
std::unordered_map< OUString, css::uno::Any >::iterator it =
m_aPropertyMap.find( pVals[ i ].Name );
if( it != m_aPropertyMap.end() )
{
if( it->second != pVals[ i ].Value )
bElementChanged = true;
}
else
bElementChanged = true;
if( bElementChanged )
{
m_aPropertyMap[ pVals[i].Name ] = pVals[i].Value;
bChanged = true;
}
}
return bChanged;
}
void PrinterOptionsHelper::appendPrintUIOptions( css::uno::Sequence< css::beans::PropertyValue >& io_rProps ) const
{
if( !m_aUIProperties.empty() )
{
sal_Int32 nIndex = io_rProps.getLength();
io_rProps.realloc( nIndex+1 );
css::beans::PropertyValue aVal;
aVal.Name = "ExtraPrintUIOptions";
aVal.Value <<= comphelper::containerToSequence(m_aUIProperties);
io_rProps[ nIndex ] = aVal;
}
}
css::uno::Any PrinterOptionsHelper::setUIControlOpt(const css::uno::Sequence< OUString >& i_rIDs,
const OUString& i_rTitle,
const css::uno::Sequence< OUString >& i_rHelpIds,
const OUString& i_rType,
const css::beans::PropertyValue* i_pVal,
const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
{
sal_Int32 nElements =
2 // ControlType + ID
+ (i_rTitle.isEmpty() ? 0 : 1) // Text
+ (i_rHelpIds.getLength() ? 1 : 0) // HelpId
+ (i_pVal ? 1 : 0) // Property
+ i_rControlOptions.maAddProps.size() // additional props
+ (i_rControlOptions.maGroupHint.isEmpty() ? 0 : 1) // grouping
+ (i_rControlOptions.mbInternalOnly ? 1 : 0) // internal hint
+ (i_rControlOptions.mbEnabled ? 0 : 1) // enabled
;
if( !i_rControlOptions.maDependsOnName.isEmpty() )
{
nElements += 1;
if( i_rControlOptions.mnDependsOnEntry != -1 )
nElements += 1;
if( i_rControlOptions.mbAttachToDependency )
nElements += 1;
}
css::uno::Sequence< css::beans::PropertyValue > aCtrl( nElements );
sal_Int32 nUsed = 0;
if( !i_rTitle.isEmpty() )
{
aCtrl[nUsed ].Name = "Text";
aCtrl[nUsed++].Value <<= i_rTitle;
}
if( i_rHelpIds.getLength() )
{
aCtrl[nUsed ].Name = "HelpId";
aCtrl[nUsed++].Value <<= i_rHelpIds;
}
aCtrl[nUsed ].Name = "ControlType";
aCtrl[nUsed++].Value <<= i_rType;
aCtrl[nUsed ].Name = "ID";
aCtrl[nUsed++].Value <<= i_rIDs;
if( i_pVal )
{
aCtrl[nUsed ].Name = "Property";
aCtrl[nUsed++].Value <<= *i_pVal;
}
if( !i_rControlOptions.maDependsOnName.isEmpty() )
{
aCtrl[nUsed ].Name = "DependsOnName";
aCtrl[nUsed++].Value <<= i_rControlOptions.maDependsOnName;
if( i_rControlOptions.mnDependsOnEntry != -1 )
{
aCtrl[nUsed ].Name = "DependsOnEntry";
aCtrl[nUsed++].Value <<= i_rControlOptions.mnDependsOnEntry;
}
if( i_rControlOptions.mbAttachToDependency )
{
aCtrl[nUsed ].Name = "AttachToDependency";
aCtrl[nUsed++].Value <<= i_rControlOptions.mbAttachToDependency;
}
}
if( !i_rControlOptions.maGroupHint.isEmpty() )
{
aCtrl[nUsed ].Name = "GroupingHint";
aCtrl[nUsed++].Value <<= i_rControlOptions.maGroupHint;
}
if( i_rControlOptions.mbInternalOnly )
{
aCtrl[nUsed ].Name = "InternalUIOnly";
aCtrl[nUsed++].Value <<= true;
}
if( ! i_rControlOptions.mbEnabled )
{
aCtrl[nUsed ].Name = "Enabled";
aCtrl[nUsed++].Value <<= false;
}
sal_Int32 nAddProps = i_rControlOptions.maAddProps.size();
for( sal_Int32 i = 0; i < nAddProps; i++ )
aCtrl[ nUsed++ ] = i_rControlOptions.maAddProps[i];
SAL_WARN_IF( nUsed != nElements, "vcl.gdi", "nUsed != nElements, probable heap corruption" );
return css::uno::makeAny( aCtrl );
}
css::uno::Any PrinterOptionsHelper::setGroupControlOpt(const OUString& i_rID,
const OUString& i_rTitle,
const OUString& i_rHelpId)
{
css::uno::Sequence< OUString > aHelpId;
if( !i_rHelpId.isEmpty() )
{
aHelpId.realloc( 1 );
*aHelpId.getArray() = i_rHelpId;
}
css::uno::Sequence< OUString > aIds { i_rID };
return setUIControlOpt(aIds, i_rTitle, aHelpId, "Group");
}
css::uno::Any PrinterOptionsHelper::setSubgroupControlOpt(const OUString& i_rID,
const OUString& i_rTitle,
const OUString& i_rHelpId,
const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
{
css::uno::Sequence< OUString > aHelpId;
if( !i_rHelpId.isEmpty() )
{
aHelpId.realloc( 1 );
*aHelpId.getArray() = i_rHelpId;
}
css::uno::Sequence< OUString > aIds { i_rID };
return setUIControlOpt(aIds, i_rTitle, aHelpId, "Subgroup", nullptr, i_rControlOptions);
}
css::uno::Any PrinterOptionsHelper::setBoolControlOpt(const OUString& i_rID,
const OUString& i_rTitle,
const OUString& i_rHelpId,
const OUString& i_rProperty,
bool i_bValue,
const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
{
css::uno::Sequence< OUString > aHelpId;
if( !i_rHelpId.isEmpty() )
{
aHelpId.realloc( 1 );
*aHelpId.getArray() = i_rHelpId;
}
css::beans::PropertyValue aVal;
aVal.Name = i_rProperty;
aVal.Value <<= i_bValue;
css::uno::Sequence< OUString > aIds { i_rID };
return setUIControlOpt(aIds, i_rTitle, aHelpId, "Bool", &aVal, i_rControlOptions);
}
css::uno::Any PrinterOptionsHelper::setChoiceRadiosControlOpt(const css::uno::Sequence< OUString >& i_rIDs,
const OUString& i_rTitle,
const css::uno::Sequence< OUString >& i_rHelpId,
const OUString& i_rProperty,
const css::uno::Sequence< OUString >& i_rChoices,
sal_Int32 i_nValue,
const css::uno::Sequence< sal_Bool >& i_rDisabledChoices,
const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
{
UIControlOptions aOpt( i_rControlOptions );
sal_Int32 nUsed = aOpt.maAddProps.size();
aOpt.maAddProps.resize( nUsed + 1 + (i_rDisabledChoices.getLength() ? 1 : 0) );
aOpt.maAddProps[nUsed].Name = "Choices";
aOpt.maAddProps[nUsed].Value <<= i_rChoices;
if( i_rDisabledChoices.getLength() )
{
aOpt.maAddProps[nUsed+1].Name = "ChoicesDisabled";
aOpt.maAddProps[nUsed+1].Value <<= i_rDisabledChoices;
}
css::beans::PropertyValue aVal;
aVal.Name = i_rProperty;
aVal.Value <<= i_nValue;
return setUIControlOpt(i_rIDs, i_rTitle, i_rHelpId, "Radio", &aVal, aOpt);
}
css::uno::Any PrinterOptionsHelper::setChoiceListControlOpt(const OUString& i_rID,
const OUString& i_rTitle,
const css::uno::Sequence< OUString >& i_rHelpId,
const OUString& i_rProperty,
const css::uno::Sequence< OUString >& i_rChoices,
sal_Int32 i_nValue,
const css::uno::Sequence< sal_Bool >& i_rDisabledChoices,
const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
{
UIControlOptions aOpt( i_rControlOptions );
sal_Int32 nUsed = aOpt.maAddProps.size();
aOpt.maAddProps.resize( nUsed + 1 + (i_rDisabledChoices.getLength() ? 1 : 0) );
aOpt.maAddProps[nUsed].Name = "Choices";
aOpt.maAddProps[nUsed].Value <<= i_rChoices;
if( i_rDisabledChoices.getLength() )
{
aOpt.maAddProps[nUsed+1].Name = "ChoicesDisabled";
aOpt.maAddProps[nUsed+1].Value <<= i_rDisabledChoices;
}
css::beans::PropertyValue aVal;
aVal.Name = i_rProperty;
aVal.Value <<= i_nValue;
css::uno::Sequence< OUString > aIds { i_rID };
return setUIControlOpt(aIds, i_rTitle, i_rHelpId, "List", &aVal, aOpt);
}
css::uno::Any PrinterOptionsHelper::setRangeControlOpt(const OUString& i_rID,
const OUString& i_rTitle,
const OUString& i_rHelpId,
const OUString& i_rProperty,
sal_Int32 i_nValue,
sal_Int32 i_nMinValue,
sal_Int32 i_nMaxValue,
const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
{
UIControlOptions aOpt( i_rControlOptions );
if( i_nMaxValue >= i_nMinValue )
{
sal_Int32 nUsed = aOpt.maAddProps.size();
aOpt.maAddProps.resize( nUsed + 2 );
aOpt.maAddProps[nUsed ].Name = "MinValue";
aOpt.maAddProps[nUsed++].Value <<= i_nMinValue;
aOpt.maAddProps[nUsed ].Name = "MaxValue";
aOpt.maAddProps[nUsed++].Value <<= i_nMaxValue;
}
css::uno::Sequence< OUString > aHelpId;
if( !i_rHelpId.isEmpty() )
{
aHelpId.realloc( 1 );
*aHelpId.getArray() = i_rHelpId;
}
css::beans::PropertyValue aVal;
aVal.Name = i_rProperty;
aVal.Value <<= i_nValue;
css::uno::Sequence< OUString > aIds { i_rID };
return setUIControlOpt(aIds, i_rTitle, aHelpId, "Range", &aVal, aOpt);
}
css::uno::Any PrinterOptionsHelper::setEditControlOpt(const OUString& i_rID,
const OUString& i_rTitle,
const OUString& i_rHelpId,
const OUString& i_rProperty,
const OUString& i_rValue,
const PrinterOptionsHelper::UIControlOptions& i_rControlOptions)
{
css::uno::Sequence< OUString > aHelpId;
if( !i_rHelpId.isEmpty() )
{
aHelpId.realloc( 1 );
*aHelpId.getArray() = i_rHelpId;
}
css::beans::PropertyValue aVal;
aVal.Name = i_rProperty;
aVal.Value <<= i_rValue;
css::uno::Sequence< OUString > aIds { i_rID };
return setUIControlOpt(aIds, i_rTitle, aHelpId, "Edit", &aVal, i_rControlOptions);
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V516 Consider inspecting an odd expression. Non-null function pointer is compared to null: 'aIsSize.Height'.
↑ V516 Consider inspecting an odd expression. Non-null function pointer is compared to null: 'aSetSize.Height'.
↑ V516 Consider inspecting an odd expression. Non-null function pointer is compared to null: 'aSetSize.Width'.
↑ V547 Expression 'nContent == 0' is always false.
↑ V547 Expression 'nJobIteration < nJobs - 1' is always false.
↑ V516 Consider inspecting an odd expression. Non-null function pointer is compared to null: 'aIsSize.Width'.
↑ V547 Expression 'bSinglePrintJobs' is always false.
↑ V560 A part of conditional expression is always false: nBin >= 0.
↑ V560 A part of conditional expression is always true: nJobIteration == nJobs - 1.
↑ V547 Expression 'bSynchronous' is always false.
↑ V560 A part of conditional expression is always true.
↑ V1019 Compound assignment expression 'pPgSizeVal->Value >>= aSizeVal' is used inside condition.