/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <comphelper/string.hxx>
#include <svl/intitem.hxx>
#include <editeng/editeng.hxx>
#include <editeng/editview.hxx>
#include <editeng/editdata.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/fhgtitem.hxx>
#include <math.h>
#include <svl/style.hxx>
#include <vcl/wrkwin.hxx>
#include <editeng/outliner.hxx>
#include "paralist.hxx"
#include <editeng/outlobj.hxx>
#include "outleeng.hxx"
#include "outlundo.hxx"
#include <editeng/eeitem.hxx>
#include <editeng/editstat.hxx>
#include <editeng/scripttypeitem.hxx>
#include <editeng/overflowingtxt.hxx>
#include <editeng/editobj.hxx>
#include <svl/itemset.hxx>
#include <svl/whiter.hxx>
#include <vcl/metric.hxx>
#include <editeng/numitem.hxx>
#include <editeng/adjustitem.hxx>
#include <vcl/graph.hxx>
#include <vcl/gdimtf.hxx>
#include <vcl/metaact.hxx>
#include <vcl/GraphicObject.hxx>
#include <editeng/svxfont.hxx>
#include <editeng/brushitem.hxx>
#include <svl/itempool.hxx>
#include <libxml/xmlwriter.h>
#include <sal/log.hxx>
// calculate if it's RTL or not
#include <unicode/ubidi.h>
#include <cassert>
#include <memory>
using std::advance;
// Outliner
void Outliner::ImplCheckDepth( sal_Int16& rnDepth ) const
{
if( rnDepth < nMinDepth )
rnDepth = nMinDepth;
else if( rnDepth > nMaxDepth )
rnDepth = nMaxDepth;
}
Paragraph* Outliner::Insert(const OUString& rText, sal_Int32 nAbsPos, sal_Int16 nDepth)
{
DBG_ASSERT(pParaList->GetParagraphCount(),"Insert:No Paras");
Paragraph* pPara;
ImplCheckDepth( nDepth );
sal_Int32 nParagraphCount = pParaList->GetParagraphCount();
if( nAbsPos > nParagraphCount )
nAbsPos = nParagraphCount;
if( bFirstParaIsEmpty )
{
pPara = pParaList->GetParagraph( 0 );
if( pPara->GetDepth() != nDepth )
{
nDepthChangedHdlPrevDepth = pPara->GetDepth();
ParaFlag nPrevFlags = pPara->nFlags;
pPara->SetDepth( nDepth );
DepthChangedHdl(pPara, nPrevFlags);
}
pPara->nFlags |= ParaFlag::HOLDDEPTH;
SetText( rText, pPara );
}
else
{
bool bUpdate = pEditEngine->GetUpdateMode();
pEditEngine->SetUpdateMode( false );
ImplBlockInsertionCallbacks( true );
pPara = new Paragraph( nDepth );
pParaList->Insert( std::unique_ptr<Paragraph>(pPara), nAbsPos );
pEditEngine->InsertParagraph( nAbsPos, OUString() );
DBG_ASSERT(pPara==pParaList->GetParagraph(nAbsPos),"Insert:Failed");
ImplInitDepth( nAbsPos, nDepth, false );
ParagraphInsertedHdl(pPara);
pPara->nFlags |= ParaFlag::HOLDDEPTH;
SetText( rText, pPara );
ImplBlockInsertionCallbacks( false );
pEditEngine->SetUpdateMode( bUpdate );
}
bFirstParaIsEmpty = false;
DBG_ASSERT(pEditEngine->GetParagraphCount()==pParaList->GetParagraphCount(),"SetText failed");
return pPara;
}
void Outliner::ParagraphInserted( sal_Int32 nPara )
{
if ( nBlockInsCallback )
return;
if( bPasting || pEditEngine->IsInUndo() )
{
Paragraph* pPara = new Paragraph( -1 );
pParaList->Insert( std::unique_ptr<Paragraph>(pPara), nPara );
if( pEditEngine->IsInUndo() )
{
pPara->nFlags = ParaFlag::SETBULLETTEXT;
pPara->bVisible = true;
const SfxInt16Item& rLevel = pEditEngine->GetParaAttrib( nPara, EE_PARA_OUTLLEVEL );
pPara->SetDepth( rLevel.GetValue() );
}
}
else
{
sal_Int16 nDepth = -1;
Paragraph* pParaBefore = pParaList->GetParagraph( nPara-1 );
if ( pParaBefore )
nDepth = pParaBefore->GetDepth();
Paragraph* pPara = new Paragraph( nDepth );
pParaList->Insert( std::unique_ptr<Paragraph>(pPara), nPara );
if( !pEditEngine->IsInUndo() )
{
ImplCalcBulletText( nPara, true, false );
ParagraphInsertedHdl(pPara);
}
}
}
void Outliner::ParagraphDeleted( sal_Int32 nPara )
{
if ( nBlockInsCallback || ( nPara == EE_PARA_ALL ) )
return;
Paragraph* pPara = pParaList->GetParagraph( nPara );
if (!pPara)
return;
sal_Int16 nDepth = pPara->GetDepth();
if( !pEditEngine->IsInUndo() )
{
aParaRemovingHdl.Call( { this, pPara } );
}
pParaList->Remove( nPara );
if( !pEditEngine->IsInUndo() && !bPasting )
{
pPara = pParaList->GetParagraph( nPara );
if ( pPara && ( pPara->GetDepth() > nDepth ) )
{
ImplCalcBulletText( nPara, true, false );
// Search for next on the this level ...
while ( pPara && pPara->GetDepth() > nDepth )
pPara = pParaList->GetParagraph( ++nPara );
}
if ( pPara && ( pPara->GetDepth() == nDepth ) )
ImplCalcBulletText( nPara, true, false );
}
}
void Outliner::Init( OutlinerMode nMode )
{
nOutlinerMode = nMode;
Clear();
EEControlBits nCtrl = pEditEngine->GetControlWord();
nCtrl &= ~EEControlBits(EEControlBits::OUTLINER|EEControlBits::OUTLINER2);
SetMaxDepth( 9 );
switch ( ImplGetOutlinerMode() )
{
case OutlinerMode::TextObject:
case OutlinerMode::TitleObject:
break;
case OutlinerMode::OutlineObject:
nCtrl |= EEControlBits::OUTLINER2;
break;
case OutlinerMode::OutlineView:
nCtrl |= EEControlBits::OUTLINER;
break;
default: OSL_FAIL( "Outliner::Init - Invalid Mode!" );
}
pEditEngine->SetControlWord( nCtrl );
const bool bWasUndoEnabled(IsUndoEnabled());
EnableUndo(false);
ImplInitDepth( 0, -1, false );
GetUndoManager().Clear();
EnableUndo(bWasUndoEnabled);
}
void Outliner::SetMaxDepth( sal_Int16 nDepth )
{
if( nMaxDepth != nDepth )
{
nMaxDepth = std::min( nDepth, sal_Int16(SVX_MAX_NUM-1) );
}
}
sal_Int16 Outliner::GetDepth( sal_Int32 nPara ) const
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
DBG_ASSERT( pPara, "Outliner::GetDepth - Paragraph not found!" );
return pPara ? pPara->GetDepth() : -1;
}
void Outliner::SetDepth( Paragraph* pPara, sal_Int16 nNewDepth )
{
ImplCheckDepth( nNewDepth );
if ( nNewDepth != pPara->GetDepth() )
{
nDepthChangedHdlPrevDepth = pPara->GetDepth();
ParaFlag nPrevFlags = pPara->nFlags;
sal_Int32 nPara = GetAbsPos( pPara );
ImplInitDepth( nPara, nNewDepth, true );
ImplCalcBulletText( nPara, false, false );
if ( ImplGetOutlinerMode() == OutlinerMode::OutlineObject )
ImplSetLevelDependentStyleSheet( nPara );
DepthChangedHdl(pPara, nPrevFlags);
}
}
sal_Int16 Outliner::GetNumberingStartValue( sal_Int32 nPara )
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
DBG_ASSERT( pPara, "Outliner::GetNumberingStartValue - Paragraph not found!" );
return pPara ? pPara->GetNumberingStartValue() : -1;
}
void Outliner::SetNumberingStartValue( sal_Int32 nPara, sal_Int16 nNumberingStartValue )
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
DBG_ASSERT( pPara, "Outliner::GetNumberingStartValue - Paragraph not found!" );
if( pPara && pPara->GetNumberingStartValue() != nNumberingStartValue )
{
if( IsUndoEnabled() && !IsInUndo() )
InsertUndo( new OutlinerUndoChangeParaNumberingRestart( this, nPara,
pPara->GetNumberingStartValue(), nNumberingStartValue,
pPara->IsParaIsNumberingRestart(), pPara->IsParaIsNumberingRestart() ) );
pPara->SetNumberingStartValue( nNumberingStartValue );
ImplCheckParagraphs( nPara, pParaList->GetParagraphCount() );
pEditEngine->SetModified();
}
}
bool Outliner::IsParaIsNumberingRestart( sal_Int32 nPara )
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
DBG_ASSERT( pPara, "Outliner::IsParaIsNumberingRestart - Paragraph not found!" );
return pPara && pPara->IsParaIsNumberingRestart();
}
void Outliner::SetParaIsNumberingRestart( sal_Int32 nPara, bool bParaIsNumberingRestart )
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
DBG_ASSERT( pPara, "Outliner::SetParaIsNumberingRestart - Paragraph not found!" );
if( pPara && (pPara->IsParaIsNumberingRestart() != bParaIsNumberingRestart) )
{
if( IsUndoEnabled() && !IsInUndo() )
InsertUndo( new OutlinerUndoChangeParaNumberingRestart( this, nPara,
pPara->GetNumberingStartValue(), pPara->GetNumberingStartValue(),
pPara->IsParaIsNumberingRestart(), bParaIsNumberingRestart ) );
pPara->SetParaIsNumberingRestart( bParaIsNumberingRestart );
ImplCheckParagraphs( nPara, pParaList->GetParagraphCount() );
pEditEngine->SetModified();
}
}
sal_Int32 Outliner::GetBulletsNumberingStatus(
const sal_Int32 nParaStart,
const sal_Int32 nParaEnd ) const
{
if ( nParaStart > nParaEnd
|| nParaEnd >= pParaList->GetParagraphCount() )
{
SAL_WARN("editeng", "<Outliner::GetBulletsNumberingStatus> - unexpected parameter values" );
return 2;
}
sal_Int32 nBulletsCount = 0;
sal_Int32 nNumberingCount = 0;
for (sal_Int32 nPara = nParaStart; nPara <= nParaEnd; ++nPara)
{
if ( !pParaList->GetParagraph(nPara) )
{
break;
}
const SvxNumberFormat* pFmt = GetNumberFormat(nPara);
if (!pFmt)
{
// At least, exists one paragraph that has no Bullets/Numbering.
break;
}
else if ((pFmt->GetNumberingType() == SVX_NUM_BITMAP) || (pFmt->GetNumberingType() == SVX_NUM_CHAR_SPECIAL))
{
// Having Bullets in this paragraph.
nBulletsCount++;
}
else
{
// Having Numbering in this paragraph.
nNumberingCount++;
}
}
const sal_Int32 nParaCount = nParaEnd - nParaStart + 1;
if ( nBulletsCount == nParaCount )
{
return 0;
}
else if ( nNumberingCount == nParaCount )
{
return 1;
}
return 2;
}
sal_Int32 Outliner::GetBulletsNumberingStatus() const
{
return pParaList->GetParagraphCount() > 0
? GetBulletsNumberingStatus( 0, pParaList->GetParagraphCount()-1 )
: 2;
}
void Outliner::SetHoriAlignIgnoreTrailingWhitespace(bool bEnabled)
{
pEditEngine->SetHoriAlignIgnoreTrailingWhitespace( bEnabled );
}
std::unique_ptr<OutlinerParaObject> Outliner::CreateParaObject( sal_Int32 nStartPara, sal_Int32 nCount ) const
{
if ( static_cast<sal_uLong>(nStartPara) + nCount >
static_cast<sal_uLong>(pParaList->GetParagraphCount()) )
nCount = pParaList->GetParagraphCount() - nStartPara;
// When a new OutlinerParaObject is created because a paragraph is just being deleted,
// it can happen that the ParaList is not updated yet...
if ( ( nStartPara + nCount ) > pEditEngine->GetParagraphCount() )
nCount = pEditEngine->GetParagraphCount() - nStartPara;
if (nCount <= 0)
return nullptr;
std::unique_ptr<EditTextObject> pText = pEditEngine->CreateTextObject( nStartPara, nCount );
const bool bIsEditDoc(OutlinerMode::TextObject == ImplGetOutlinerMode());
ParagraphDataVector aParagraphDataVector(nCount);
const sal_Int32 nLastPara(nStartPara + nCount - 1);
for(sal_Int32 nPara(nStartPara); nPara <= nLastPara; nPara++)
{
aParagraphDataVector[nPara-nStartPara] = *GetParagraph(nPara);
}
std::unique_ptr<OutlinerParaObject> pPObj(new OutlinerParaObject(*pText, aParagraphDataVector, bIsEditDoc));
pPObj->SetOutlinerMode(GetMode());
return pPObj;
}
void Outliner::SetToEmptyText()
{
std::unique_ptr<OutlinerParaObject> pEmptyTxt = GetEmptyParaObject();
SetText(*pEmptyTxt);
}
void Outliner::SetText( const OUString& rText, Paragraph* pPara )
{
DBG_ASSERT(pPara,"SetText:No Para");
bool bUpdate = pEditEngine->GetUpdateMode();
pEditEngine->SetUpdateMode( false );
ImplBlockInsertionCallbacks( true );
sal_Int32 nPara = pParaList->GetAbsPos( pPara );
if (rText.isEmpty())
{
pEditEngine->SetText( nPara, rText );
ImplInitDepth( nPara, pPara->GetDepth(), false );
}
else
{
const OUString aText(convertLineEnd(rText, LINEEND_LF));
sal_Int32 nPos = 0;
sal_Int32 nInsPos = nPara+1;
sal_Int32 nIdx {0};
// Loop over all tokens, but ignore the last one if empty
// (i.e. if strings ends with the delimiter, detected by
// checking nIdx against string length). This check also
// handle empty strings.
while( nIdx>=0 && nIdx<aText.getLength() )
{
OUString aStr = aText.getToken( 0, '\x0A', nIdx );
sal_Int16 nCurDepth;
if( nPos )
{
pPara = new Paragraph( -1 );
nCurDepth = -1;
}
else
nCurDepth = pPara->GetDepth();
// In the outliner mode, filter the tabs and set the indentation
// about a LRSpaceItem. In EditEngine mode intend over old tabs
if( ( ImplGetOutlinerMode() == OutlinerMode::OutlineObject ) ||
( ImplGetOutlinerMode() == OutlinerMode::OutlineView ) )
{
// Extract Tabs
sal_Int32 nTabs = 0;
while ( ( nTabs < aStr.getLength() ) && ( aStr[nTabs] == '\t' ) )
nTabs++;
if ( nTabs )
aStr = aStr.copy(nTabs);
// Keep depth? (see Outliner::Insert)
if( !(pPara->nFlags & ParaFlag::HOLDDEPTH) )
{
nCurDepth = nTabs-1; //TODO: sal_Int32 -> sal_Int16!
ImplCheckDepth( nCurDepth );
pPara->SetDepth( nCurDepth );
pPara->nFlags &= (~ParaFlag::HOLDDEPTH);
}
}
if( nPos ) // not with the first paragraph
{
pParaList->Insert( std::unique_ptr<Paragraph>(pPara), nInsPos );
pEditEngine->InsertParagraph( nInsPos, aStr );
ParagraphInsertedHdl(pPara);
}
else
{
nInsPos--;
pEditEngine->SetText( nInsPos, aStr );
}
ImplInitDepth( nInsPos, nCurDepth, false );
nInsPos++;
nPos++;
}
}
DBG_ASSERT(pParaList->GetParagraphCount()==pEditEngine->GetParagraphCount(),"SetText failed!");
bFirstParaIsEmpty = false;
ImplBlockInsertionCallbacks( false );
pEditEngine->SetUpdateMode( bUpdate );
}
// pView == 0 -> Ignore tabs
bool Outliner::ImpConvertEdtToOut( sal_Int32 nPara )
{
bool bConverted = false;
sal_Int32 nTabs = 0;
ESelection aDelSel;
OUString aName;
OUString aHeading_US( "heading" );
OUString aNumber_US( "Numbering" );
OUString aStr( pEditEngine->GetText( nPara ) );
const sal_Unicode* pPtr = aStr.getStr();
sal_Int32 nHeadingNumberStart = 0;
sal_Int32 nNumberingNumberStart = 0;
SfxStyleSheet* pStyle= pEditEngine->GetStyleSheet( nPara );
if( pStyle )
{
aName = pStyle->GetName();
sal_Int32 nSearch;
if ( ( nSearch = aName.indexOf( aHeading_US ) ) != -1 )
nHeadingNumberStart = nSearch + aHeading_US.getLength();
else if ( ( nSearch = aName.indexOf( aNumber_US ) ) != -1 )
nNumberingNumberStart = nSearch + aNumber_US.getLength();
}
if ( nHeadingNumberStart || nNumberingNumberStart )
{
// PowerPoint import ?
if( nHeadingNumberStart && ( aStr.getLength() >= 2 ) &&
( pPtr[0] != '\t' ) && ( pPtr[1] == '\t' ) )
{
// Extract Bullet and Tab
aDelSel = ESelection( nPara, 0, nPara, 2 );
}
sal_Int32 nPos = nHeadingNumberStart ? nHeadingNumberStart : nNumberingNumberStart;
OUString aLevel = comphelper::string::stripStart(aName.copy(nPos), ' ');
nTabs = aLevel.toInt32();
if( nTabs )
nTabs--; // Level 0 = "heading 1"
bConverted = true;
}
else
{
// filter leading tabs
while( *pPtr == '\t' )
{
pPtr++;
nTabs++;
}
// Remove tabs from the text
if( nTabs )
aDelSel = ESelection( nPara, 0, nPara, nTabs );
}
if ( aDelSel.HasRange() )
{
pEditEngine->QuickDelete( aDelSel );
}
const SfxInt16Item& rLevel = pEditEngine->GetParaAttrib( nPara, EE_PARA_OUTLLEVEL );
sal_Int16 nOutlLevel = rLevel.GetValue();
ImplCheckDepth( nOutlLevel );
ImplInitDepth( nPara, nOutlLevel, false );
return bConverted;
}
void Outliner::SetText( const OutlinerParaObject& rPObj )
{
bool bUpdate = pEditEngine->GetUpdateMode();
pEditEngine->SetUpdateMode( false );
bool bUndo = pEditEngine->IsUndoEnabled();
EnableUndo( false );
Init( rPObj.GetOutlinerMode() );
ImplBlockInsertionCallbacks( true );
pEditEngine->SetText(rPObj.GetTextObject());
bFirstParaIsEmpty = false;
pParaList->Clear();
for( sal_Int32 nCurPara = 0; nCurPara < rPObj.Count(); nCurPara++ )
{
std::unique_ptr<Paragraph> pPara(new Paragraph( rPObj.GetParagraphData(nCurPara)));
ImplCheckDepth( pPara->nDepth );
pParaList->Append(std::move(pPara));
ImplCheckNumBulletItem( nCurPara );
}
ImplCheckParagraphs( 0, pParaList->GetParagraphCount() );
EnableUndo( bUndo );
ImplBlockInsertionCallbacks( false );
pEditEngine->SetUpdateMode( bUpdate );
DBG_ASSERT( pParaList->GetParagraphCount()==rPObj.Count(),"SetText failed");
DBG_ASSERT( pEditEngine->GetParagraphCount()==rPObj.Count(),"SetText failed");
}
void Outliner::AddText( const OutlinerParaObject& rPObj )
{
bool bUpdate = pEditEngine->GetUpdateMode();
pEditEngine->SetUpdateMode( false );
ImplBlockInsertionCallbacks( true );
sal_Int32 nPara;
if( bFirstParaIsEmpty )
{
pParaList->Clear();
pEditEngine->SetText(rPObj.GetTextObject());
nPara = 0;
}
else
{
nPara = pParaList->GetParagraphCount();
pEditEngine->InsertParagraph( EE_PARA_APPEND, rPObj.GetTextObject() );
}
bFirstParaIsEmpty = false;
for( sal_Int32 n = 0; n < rPObj.Count(); n++ )
{
Paragraph* pPara = new Paragraph( rPObj.GetParagraphData(n) );
pParaList->Append(std::unique_ptr<Paragraph>(pPara));
sal_Int32 nP = nPara+n;
DBG_ASSERT(pParaList->GetAbsPos(pPara)==nP,"AddText:Out of sync");
ImplInitDepth( nP, pPara->GetDepth(), false );
}
DBG_ASSERT( pEditEngine->GetParagraphCount()==pParaList->GetParagraphCount(), "SetText: OutOfSync" );
ImplCheckParagraphs( nPara, pParaList->GetParagraphCount() );
ImplBlockInsertionCallbacks( false );
pEditEngine->SetUpdateMode( bUpdate );
}
OUString Outliner::CalcFieldValue( const SvxFieldItem& rField, sal_Int32 nPara, sal_Int32 nPos, boost::optional<Color>& rpTxtColor, boost::optional<Color>& rpFldColor )
{
if ( !aCalcFieldValueHdl.IsSet() )
return OUString( ' ' );
EditFieldInfo aFldInfo( this, rField, nPara, nPos );
// The FldColor is preset with COL_LIGHTGRAY.
if ( rpFldColor )
aFldInfo.SetFieldColor( *rpFldColor );
aCalcFieldValueHdl.Call( &aFldInfo );
if ( aFldInfo.GetTextColor() )
{
rpTxtColor = *aFldInfo.GetTextColor();
}
if (aFldInfo.GetFieldColor())
rpFldColor = *aFldInfo.GetFieldColor();
else
rpFldColor.reset();
return aFldInfo.GetRepresentation();
}
void Outliner::SetStyleSheet( sal_Int32 nPara, SfxStyleSheet* pStyle )
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
if (pPara)
{
pEditEngine->SetStyleSheet( nPara, pStyle );
pPara->nFlags |= ParaFlag::SETBULLETTEXT;
ImplCheckNumBulletItem( nPara );
}
}
void Outliner::ImplCheckNumBulletItem( sal_Int32 nPara )
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
if (pPara)
pPara->aBulSize.setWidth( -1 );
}
void Outliner::ImplSetLevelDependentStyleSheet( sal_Int32 nPara )
{
DBG_ASSERT( ( ImplGetOutlinerMode() == OutlinerMode::OutlineObject ) || ( ImplGetOutlinerMode() == OutlinerMode::OutlineView ), "SetLevelDependentStyleSheet: Wrong Mode!" );
SfxStyleSheet* pStyle = GetStyleSheet( nPara );
if ( pStyle )
{
sal_Int16 nDepth = GetDepth( nPara );
if( nDepth < 0 )
nDepth = 0;
OUString aNewStyleSheetName( pStyle->GetName() );
aNewStyleSheetName = aNewStyleSheetName.copy( 0, aNewStyleSheetName.getLength()-1 );
aNewStyleSheetName += OUString::number( nDepth+1 );
SfxStyleSheet* pNewStyle = static_cast<SfxStyleSheet*>(GetStyleSheetPool()->Find( aNewStyleSheetName, pStyle->GetFamily() ));
DBG_ASSERT( pNewStyle, "AutoStyleSheetName - Style not found!" );
if ( pNewStyle && ( pNewStyle != GetStyleSheet( nPara ) ) )
{
SfxItemSet aOldAttrs( GetParaAttribs( nPara ) );
SetStyleSheet( nPara, pNewStyle );
if ( aOldAttrs.GetItemState( EE_PARA_NUMBULLET ) == SfxItemState::SET )
{
SfxItemSet aAttrs( GetParaAttribs( nPara ) );
aAttrs.Put( aOldAttrs.Get( EE_PARA_NUMBULLET ) );
SetParaAttribs( nPara, aAttrs );
}
}
}
}
void Outliner::ImplInitDepth( sal_Int32 nPara, sal_Int16 nDepth, bool bCreateUndo )
{
DBG_ASSERT( ( nDepth >= nMinDepth ) && ( nDepth <= nMaxDepth ), "ImplInitDepth - Depth is invalid!" );
Paragraph* pPara = pParaList->GetParagraph( nPara );
if (!pPara)
return;
sal_Int16 nOldDepth = pPara->GetDepth();
pPara->SetDepth( nDepth );
// For IsInUndo attributes and style do not have to be set, there
// the old values are restored by the EditEngine.
if( !IsInUndo() )
{
bool bUpdate = pEditEngine->GetUpdateMode();
pEditEngine->SetUpdateMode( false );
bool bUndo = bCreateUndo && IsUndoEnabled();
SfxItemSet aAttrs( pEditEngine->GetParaAttribs( nPara ) );
aAttrs.Put( SfxInt16Item( EE_PARA_OUTLLEVEL, nDepth ) );
pEditEngine->SetParaAttribs( nPara, aAttrs );
ImplCheckNumBulletItem( nPara );
ImplCalcBulletText( nPara, false, false );
if ( bUndo )
{
InsertUndo( new OutlinerUndoChangeDepth( this, nPara, nOldDepth, nDepth ) );
}
pEditEngine->SetUpdateMode( bUpdate );
}
}
void Outliner::SetParaAttribs( sal_Int32 nPara, const SfxItemSet& rSet )
{
pEditEngine->SetParaAttribs( nPara, rSet );
}
void Outliner::SetCharAttribs(sal_Int32 nPara, const SfxItemSet& rSet)
{
pEditEngine->SetCharAttribs(nPara, rSet);
}
bool Outliner::Expand( Paragraph const * pPara )
{
if ( pParaList->HasHiddenChildren( pPara ) )
{
OLUndoExpand* pUndo = nullptr;
bool bUndo = IsUndoEnabled() && !IsInUndo();
if( bUndo )
{
UndoActionStart( OLUNDO_EXPAND );
pUndo = new OLUndoExpand( this, OLUNDO_EXPAND );
pUndo->nCount = pParaList->GetAbsPos( pPara );
}
pParaList->Expand( pPara );
InvalidateBullet(pParaList->GetAbsPos(pPara));
if( bUndo )
{
InsertUndo( pUndo );
UndoActionEnd();
}
return true;
}
return false;
}
bool Outliner::Collapse( Paragraph const * pPara )
{
if ( pParaList->HasVisibleChildren( pPara ) ) // expanded
{
OLUndoExpand* pUndo = nullptr;
bool bUndo = false;
if( !IsInUndo() && IsUndoEnabled() )
bUndo = true;
if( bUndo )
{
UndoActionStart( OLUNDO_COLLAPSE );
pUndo = new OLUndoExpand( this, OLUNDO_COLLAPSE );
pUndo->nCount = pParaList->GetAbsPos( pPara );
}
pParaList->Collapse( pPara );
InvalidateBullet(pParaList->GetAbsPos(pPara));
if( bUndo )
{
InsertUndo( pUndo );
UndoActionEnd();
}
return true;
}
return false;
}
vcl::Font Outliner::ImpCalcBulletFont( sal_Int32 nPara ) const
{
const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
DBG_ASSERT( pFmt && ( pFmt->GetNumberingType() != SVX_NUM_BITMAP ) && ( pFmt->GetNumberingType() != SVX_NUM_NUMBER_NONE ), "ImpCalcBulletFont: Missing or BitmapBullet!" );
vcl::Font aStdFont;
if ( !pEditEngine->IsFlatMode() )
{
ESelection aSel( nPara, 0, nPara, 0 );
aStdFont = EditEngine::CreateFontFromItemSet( pEditEngine->GetAttribs( aSel ), pEditEngine->GetScriptType( aSel ) );
}
else
{
aStdFont = pEditEngine->GetStandardFont( nPara );
}
vcl::Font aBulletFont;
const vcl::Font *pSourceFont = nullptr;
if ( pFmt->GetNumberingType() == SVX_NUM_CHAR_SPECIAL )
{
pSourceFont = pFmt->GetBulletFont();
}
if (pSourceFont)
{
aBulletFont = *pSourceFont;
}
else
{
aBulletFont = aStdFont;
aBulletFont.SetUnderline( LINESTYLE_NONE );
aBulletFont.SetOverline( LINESTYLE_NONE );
aBulletFont.SetStrikeout( STRIKEOUT_NONE );
aBulletFont.SetEmphasisMark( FontEmphasisMark::NONE );
aBulletFont.SetRelief( FontRelief::NONE );
}
// Use original scale...
sal_uInt16 nStretchX, nStretchY;
GetGlobalCharStretching(nStretchX, nStretchY);
sal_uInt16 nScale = pFmt->GetBulletRelSize() * nStretchY / 100;
sal_uLong nScaledLineHeight = aStdFont.GetFontSize().Height();
nScaledLineHeight *= nScale*10;
nScaledLineHeight /= 1000;
aBulletFont.SetAlignment( ALIGN_BOTTOM );
aBulletFont.SetFontSize( Size( 0, nScaledLineHeight ) );
bool bVertical = IsVertical();
aBulletFont.SetVertical( bVertical );
aBulletFont.SetOrientation( bVertical ? (IsTopToBottom() ? 2700 : 900) : 0 );
Color aColor( COL_AUTO );
if( !pEditEngine->IsFlatMode() && !( pEditEngine->GetControlWord() & EEControlBits::NOCOLORS ) )
{
aColor = pFmt->GetBulletColor();
}
if ( ( aColor == COL_AUTO ) || ( IsForceAutoColor() ) )
aColor = pEditEngine->GetAutoColor();
aBulletFont.SetColor( aColor );
return aBulletFont;
}
void Outliner::PaintBullet( sal_Int32 nPara, const Point& rStartPos,
const Point& rOrigin, short nOrientation, OutputDevice* pOutDev )
{
bool bDrawBullet = false;
if (pEditEngine)
{
const SfxBoolItem& rBulletState = pEditEngine->GetParaAttrib( nPara, EE_PARA_BULLETSTATE );
bDrawBullet = rBulletState.GetValue();
}
if (bDrawBullet && ImplHasNumberFormat(nPara))
{
bool bVertical = IsVertical();
bool bTopToBottom = IsTopToBottom();
bool bRightToLeftPara = pEditEngine->IsRightToLeft( nPara );
tools::Rectangle aBulletArea( ImpCalcBulletArea( nPara, true, false ) );
sal_uInt16 nStretchX, nStretchY;
GetGlobalCharStretching(nStretchX, nStretchY);
aBulletArea = tools::Rectangle( Point(aBulletArea.Left()*nStretchX/100,
aBulletArea.Top()),
Size(aBulletArea.GetWidth()*nStretchX/100,
aBulletArea.GetHeight()) );
Paragraph* pPara = pParaList->GetParagraph( nPara );
const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
if ( pFmt && ( pFmt->GetNumberingType() != SVX_NUM_NUMBER_NONE ) )
{
if( pFmt->GetNumberingType() != SVX_NUM_BITMAP )
{
vcl::Font aBulletFont( ImpCalcBulletFont( nPara ) );
// Use baseline
bool bSymbol = pFmt->GetNumberingType() == SVX_NUM_CHAR_SPECIAL;
aBulletFont.SetAlignment( bSymbol ? ALIGN_BOTTOM : ALIGN_BASELINE );
vcl::Font aOldFont = pOutDev->GetFont();
pOutDev->SetFont( aBulletFont );
ParagraphInfos aParaInfos = pEditEngine->GetParagraphInfos( nPara );
Point aTextPos;
if ( !bVertical )
{
// aTextPos.Y() = rStartPos.Y() + aBulletArea.Bottom();
aTextPos.setY( rStartPos.Y() + ( bSymbol ? aBulletArea.Bottom() : aParaInfos.nFirstLineMaxAscent ) );
if ( !bRightToLeftPara )
aTextPos.setX( rStartPos.X() + aBulletArea.Left() );
else
aTextPos.setX( rStartPos.X() + GetPaperSize().Width() - aBulletArea.Right() );
}
else
{
if (bTopToBottom)
{
// aTextPos.X() = rStartPos.X() - aBulletArea.Bottom();
aTextPos.setX( rStartPos.X() - (bSymbol ? aBulletArea.Bottom() : aParaInfos.nFirstLineMaxAscent) );
aTextPos.setY( rStartPos.Y() + aBulletArea.Left() );
}
else
{
aTextPos.setX( rStartPos.X() + (bSymbol ? aBulletArea.Bottom() : aParaInfos.nFirstLineMaxAscent) );
aTextPos.setY( rStartPos.Y() + aBulletArea.Left() );
}
}
if ( nOrientation )
{
// Both TopLeft and bottom left is not quite correct,
// since in EditEngine baseline ...
double nRealOrientation = nOrientation*F_PI1800;
double nCos = cos( nRealOrientation );
double nSin = sin( nRealOrientation );
Point aRotatedPos;
// Translation...
aTextPos -= rOrigin;
// Rotation...
aRotatedPos.setX(static_cast<long>(nCos*aTextPos.X() + nSin*aTextPos.Y()) );
aRotatedPos.setY(static_cast<long>(- (nSin*aTextPos.X() - nCos*aTextPos.Y())) );
aTextPos = aRotatedPos;
// Translation...
aTextPos += rOrigin;
vcl::Font aRotatedFont( aBulletFont );
aRotatedFont.SetOrientation( nOrientation );
pOutDev->SetFont( aRotatedFont );
}
// VCL will take care of brackets and so on...
ComplexTextLayoutFlags nLayoutMode = pOutDev->GetLayoutMode();
nLayoutMode &= ~ComplexTextLayoutFlags(ComplexTextLayoutFlags::BiDiRtl|ComplexTextLayoutFlags::BiDiStrong);
if ( bRightToLeftPara )
nLayoutMode |= ComplexTextLayoutFlags::BiDiRtl | ComplexTextLayoutFlags::TextOriginLeft | ComplexTextLayoutFlags::BiDiStrong;
pOutDev->SetLayoutMode( nLayoutMode );
if(bStrippingPortions)
{
const vcl::Font aSvxFont(pOutDev->GetFont());
std::unique_ptr<long[]> pBuf(new long[ pPara->GetText().getLength() ]);
pOutDev->GetTextArray( pPara->GetText(), pBuf.get() );
if(bSymbol)
{
// aTextPos is Bottom, go to Baseline
FontMetric aMetric(pOutDev->GetFontMetric());
aTextPos.AdjustY( -(aMetric.GetDescent()) );
}
DrawingText(aTextPos, pPara->GetText(), 0, pPara->GetText().getLength(), pBuf.get(),
aSvxFont, nPara, bRightToLeftPara ? 1 : 0, nullptr, nullptr, false, false, true, nullptr, Color(), Color());
}
else
{
pOutDev->DrawText( aTextPos, pPara->GetText() );
}
pOutDev->SetFont( aOldFont );
}
else
{
if ( pFmt->GetBrush()->GetGraphicObject() )
{
Point aBulletPos;
if ( !bVertical )
{
aBulletPos.setY( rStartPos.Y() + aBulletArea.Top() );
if ( !bRightToLeftPara )
aBulletPos.setX( rStartPos.X() + aBulletArea.Left() );
else
aBulletPos.setX( rStartPos.X() + GetPaperSize().Width() - aBulletArea.Right() );
}
else
{
if (bTopToBottom)
{
aBulletPos.setX( rStartPos.X() - aBulletArea.Bottom() );
aBulletPos.setY( rStartPos.Y() + aBulletArea.Left() );
}
else
{
aBulletPos.setX( rStartPos.X() + aBulletArea.Top() );
aBulletPos.setY( rStartPos.Y() - aBulletArea.Right() );
}
}
if(bStrippingPortions)
{
if(aDrawBulletHdl.IsSet())
{
// call something analog to aDrawPortionHdl (if set) and feed it something
// analog to DrawPortionInfo...
// created aDrawBulletHdl, Set/GetDrawBulletHdl.
// created DrawBulletInfo and added handling to sdrtextdecomposition.cxx
DrawBulletInfo aDrawBulletInfo(
*pFmt->GetBrush()->GetGraphicObject(),
aBulletPos,
pPara->aBulSize);
aDrawBulletHdl.Call(&aDrawBulletInfo);
}
}
else
{
// Remove CAST when KA made the Draw-Method const
const_cast<GraphicObject*>(pFmt->GetBrush()->GetGraphicObject())->Draw( pOutDev, aBulletPos, pPara->aBulSize );
}
}
}
}
// In case of collapsed subparagraphs paint a line before the text.
if( pParaList->HasChildren(pPara) && !pParaList->HasVisibleChildren(pPara) &&
!bStrippingPortions && !nOrientation )
{
long nWidth = pOutDev->PixelToLogic( Size( 10, 0 ) ).Width();
Point aStartPos, aEndPos;
if ( !bVertical )
{
aStartPos.setY( rStartPos.Y() + aBulletArea.Bottom() );
if ( !bRightToLeftPara )
aStartPos.setX( rStartPos.X() + aBulletArea.Right() );
else
aStartPos.setX( rStartPos.X() + GetPaperSize().Width() - aBulletArea.Left() );
aEndPos = aStartPos;
aEndPos.AdjustX(nWidth );
}
else
{
aStartPos.setX( rStartPos.X() - aBulletArea.Bottom() );
aStartPos.setY( rStartPos.Y() + aBulletArea.Right() );
aEndPos = aStartPos;
aEndPos.AdjustY(nWidth );
}
const Color& rOldLineColor = pOutDev->GetLineColor();
pOutDev->SetLineColor( COL_BLACK );
pOutDev->DrawLine( aStartPos, aEndPos );
pOutDev->SetLineColor( rOldLineColor );
}
}
}
void Outliner::InvalidateBullet(sal_Int32 nPara)
{
long nLineHeight = static_cast<long>(pEditEngine->GetLineHeight(nPara ));
for (OutlinerView* pView : aViewList)
{
Point aPos( pView->pEditView->GetWindowPosTopLeft(nPara ) );
tools::Rectangle aRect( pView->GetOutputArea() );
aRect.SetRight( aPos.X() );
aRect.SetTop( aPos.Y() );
aRect.SetBottom( aPos.Y() );
aRect.AdjustBottom(nLineHeight );
pView->GetWindow()->Invalidate( aRect );
}
}
ErrCode Outliner::Read( SvStream& rInput, const OUString& rBaseURL, EETextFormat eFormat, SvKeyValueIterator* pHTTPHeaderAttrs )
{
bool bOldUndo = pEditEngine->IsUndoEnabled();
EnableUndo( false );
bool bUpdate = pEditEngine->GetUpdateMode();
pEditEngine->SetUpdateMode( false );
Clear();
ImplBlockInsertionCallbacks( true );
ErrCode nRet = pEditEngine->Read( rInput, rBaseURL, eFormat, pHTTPHeaderAttrs );
bFirstParaIsEmpty = false;
sal_Int32 nParas = pEditEngine->GetParagraphCount();
pParaList->Clear();
for ( sal_Int32 n = 0; n < nParas; n++ )
{
std::unique_ptr<Paragraph> pPara(new Paragraph( 0 ));
pParaList->Append(std::move(pPara));
}
ImpFilterIndents( 0, nParas-1 );
ImplBlockInsertionCallbacks( false );
pEditEngine->SetUpdateMode( bUpdate );
EnableUndo( bOldUndo );
return nRet;
}
void Outliner::ImpFilterIndents( sal_Int32 nFirstPara, sal_Int32 nLastPara )
{
bool bUpdate = pEditEngine->GetUpdateMode();
pEditEngine->SetUpdateMode( false );
Paragraph* pLastConverted = nullptr;
for( sal_Int32 nPara = nFirstPara; nPara <= nLastPara; nPara++ )
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
if (pPara)
{
if( ImpConvertEdtToOut( nPara ) )
{
pLastConverted = pPara;
}
else if ( pLastConverted )
{
// Arrange normal paragraphs below the heading ...
pPara->SetDepth( pLastConverted->GetDepth() );
}
ImplInitDepth( nPara, pPara->GetDepth(), false );
}
}
pEditEngine->SetUpdateMode( bUpdate );
}
SfxUndoManager& Outliner::GetUndoManager()
{
return pEditEngine->GetUndoManager();
}
SfxUndoManager* Outliner::SetUndoManager(SfxUndoManager* pNew)
{
return pEditEngine->SetUndoManager(pNew);
}
void Outliner::ImpTextPasted( sal_Int32 nStartPara, sal_Int32 nCount )
{
bool bUpdate = pEditEngine->GetUpdateMode();
pEditEngine->SetUpdateMode( false );
const sal_Int32 nStart = nStartPara;
Paragraph* pPara = pParaList->GetParagraph( nStartPara );
while( nCount && pPara )
{
if( ImplGetOutlinerMode() != OutlinerMode::TextObject )
{
nDepthChangedHdlPrevDepth = pPara->GetDepth();
ParaFlag nPrevFlags = pPara->nFlags;
ImpConvertEdtToOut( nStartPara );
if( nStartPara == nStart )
{
// the existing paragraph has changed depth or flags
if( (pPara->GetDepth() != nDepthChangedHdlPrevDepth) || (pPara->nFlags != nPrevFlags) )
DepthChangedHdl(pPara, nPrevFlags);
}
}
else // EditEngine mode
{
sal_Int16 nDepth = -1;
const SfxItemSet& rAttrs = pEditEngine->GetParaAttribs( nStartPara );
if ( rAttrs.GetItemState( EE_PARA_OUTLLEVEL ) == SfxItemState::SET )
{
const SfxInt16Item& rLevel = rAttrs.Get( EE_PARA_OUTLLEVEL );
nDepth = rLevel.GetValue();
}
if ( nDepth != GetDepth( nStartPara ) )
ImplInitDepth( nStartPara, nDepth, false );
}
nCount--;
nStartPara++;
pPara = pParaList->GetParagraph( nStartPara );
}
pEditEngine->SetUpdateMode( bUpdate );
DBG_ASSERT(pParaList->GetParagraphCount()==pEditEngine->GetParagraphCount(),"ImpTextPasted failed");
}
bool Outliner::IndentingPagesHdl( OutlinerView* pView )
{
if( !aIndentingPagesHdl.IsSet() )
return true;
return aIndentingPagesHdl.Call( pView );
}
bool Outliner::ImpCanIndentSelectedPages( OutlinerView* pCurView )
{
// The selected pages must already be set in advance through
// ImpCalcSelectedPages
// If the first paragraph is on level 0 it can not indented in any case,
// possible there might be indentations in the following on the 0 level.
if ( ( mnFirstSelPage == 0 ) && ( ImplGetOutlinerMode() != OutlinerMode::TextObject ) )
{
if ( nDepthChangedHdlPrevDepth == 1 ) // is the only page
return false;
else
(void)pCurView->ImpCalcSelectedPages( false ); // without the first
}
return IndentingPagesHdl( pCurView );
}
bool Outliner::ImpCanDeleteSelectedPages( OutlinerView* pCurView )
{
// The selected pages must already be set in advance through
// ImpCalcSelectedPages
return RemovingPagesHdl( pCurView );
}
Outliner::Outliner(SfxItemPool* pPool, OutlinerMode nMode)
: mnFirstSelPage(0)
, nDepthChangedHdlPrevDepth(0)
, nMaxDepth(9)
, nMinDepth(-1)
, bFirstParaIsEmpty(true)
, nBlockInsCallback(0)
, bStrippingPortions(false)
, bPasting(false)
{
pParaList.reset( new ParagraphList );
pParaList->SetVisibleStateChangedHdl( LINK( this, Outliner, ParaVisibleStateChangedHdl ) );
std::unique_ptr<Paragraph> pPara(new Paragraph( 0 ));
pParaList->Append(std::move(pPara));
pEditEngine.reset( new OutlinerEditEng( this, pPool ) );
pEditEngine->SetBeginMovingParagraphsHdl( LINK( this, Outliner, BeginMovingParagraphsHdl ) );
pEditEngine->SetEndMovingParagraphsHdl( LINK( this, Outliner, EndMovingParagraphsHdl ) );
pEditEngine->SetBeginPasteOrDropHdl( LINK( this, Outliner, BeginPasteOrDropHdl ) );
pEditEngine->SetEndPasteOrDropHdl( LINK( this, Outliner, EndPasteOrDropHdl ) );
Init( nMode );
}
Outliner::~Outliner()
{
pParaList->Clear();
pParaList.reset();
pEditEngine.reset();
}
size_t Outliner::InsertView( OutlinerView* pView, size_t nIndex )
{
size_t ActualIndex;
if ( nIndex >= aViewList.size() )
{
aViewList.push_back( pView );
ActualIndex = aViewList.size() - 1;
}
else
{
ViewList::iterator it = aViewList.begin();
advance( it, nIndex );
ActualIndex = nIndex;
}
pEditEngine->InsertView( pView->pEditView.get(), nIndex );
return ActualIndex;
}
void Outliner::RemoveView( OutlinerView const * pView )
{
for ( ViewList::iterator it = aViewList.begin(); it != aViewList.end(); ++it )
{
if ( *it == pView )
{
pView->pEditView->HideCursor(); // HACK
pEditEngine->RemoveView( pView->pEditView.get() );
aViewList.erase( it );
break;
}
}
}
void Outliner::RemoveView( size_t nIndex )
{
EditView* pEditView = pEditEngine->GetView( nIndex );
pEditView->HideCursor(); // HACK
pEditEngine->RemoveView( nIndex );
{
ViewList::iterator it = aViewList.begin();
advance( it, nIndex );
aViewList.erase( it );
}
}
OutlinerView* Outliner::GetView( size_t nIndex ) const
{
return ( nIndex >= aViewList.size() ) ? nullptr : aViewList[ nIndex ];
}
size_t Outliner::GetViewCount() const
{
return aViewList.size();
}
void Outliner::ParagraphInsertedHdl(Paragraph* pPara)
{
if( !IsInUndo() )
aParaInsertedHdl.Call( { this, pPara } );
}
void Outliner::DepthChangedHdl(Paragraph* pPara, ParaFlag nPrevFlags)
{
if( !IsInUndo() )
aDepthChangedHdl.Call( { this, pPara, nPrevFlags } );
}
sal_Int32 Outliner::GetAbsPos( Paragraph const * pPara )
{
DBG_ASSERT(pPara,"GetAbsPos:No Para");
return pParaList->GetAbsPos( pPara );
}
sal_Int32 Outliner::GetParagraphCount() const
{
return pParaList->GetParagraphCount();
}
Paragraph* Outliner::GetParagraph( sal_Int32 nAbsPos ) const
{
return pParaList->GetParagraph( nAbsPos );
}
bool Outliner::HasChildren( Paragraph const * pParagraph ) const
{
return pParaList->HasChildren( pParagraph );
}
bool Outliner::ImplHasNumberFormat( sal_Int32 nPara ) const
{
return GetNumberFormat(nPara) != nullptr;
}
const SvxNumberFormat* Outliner::GetNumberFormat( sal_Int32 nPara ) const
{
const SvxNumberFormat* pFmt = nullptr;
Paragraph* pPara = pParaList->GetParagraph( nPara );
if (!pPara)
return nullptr;
sal_Int16 nDepth = pPara->GetDepth();
if( nDepth >= 0 )
{
const SvxNumBulletItem& rNumBullet = pEditEngine->GetParaAttrib( nPara, EE_PARA_NUMBULLET );
if ( rNumBullet.GetNumRule()->GetLevelCount() > nDepth )
pFmt = rNumBullet.GetNumRule()->Get( nDepth );
}
return pFmt;
}
Size Outliner::ImplGetBulletSize( sal_Int32 nPara )
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
if (!pPara)
return Size();
if( pPara->aBulSize.Width() == -1 )
{
const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
DBG_ASSERT( pFmt, "ImplGetBulletSize - no Bullet!" );
if ( pFmt->GetNumberingType() == SVX_NUM_NUMBER_NONE )
{
pPara->aBulSize = Size( 0, 0 );
}
else if( pFmt->GetNumberingType() != SVX_NUM_BITMAP )
{
OUString aBulletText = ImplGetBulletText( nPara );
OutputDevice* pRefDev = pEditEngine->GetRefDevice();
vcl::Font aBulletFont( ImpCalcBulletFont( nPara ) );
vcl::Font aRefFont( pRefDev->GetFont());
pRefDev->SetFont( aBulletFont );
pPara->aBulSize.setWidth( pRefDev->GetTextWidth( aBulletText ) );
pPara->aBulSize.setHeight( pRefDev->GetTextHeight() );
pRefDev->SetFont( aRefFont );
}
else
{
pPara->aBulSize = OutputDevice::LogicToLogic(pFmt->GetGraphicSize(),
MapMode(MapUnit::Map100thMM),
pEditEngine->GetRefDevice()->GetMapMode());
}
}
return pPara->aBulSize;
}
void Outliner::ImplCheckParagraphs( sal_Int32 nStart, sal_Int32 nEnd )
{
for ( sal_Int32 n = nStart; n < nEnd; n++ )
{
Paragraph* pPara = pParaList->GetParagraph( n );
if (pPara)
{
pPara->Invalidate();
ImplCalcBulletText( n, false, false );
}
}
}
void Outliner::SetRefDevice( OutputDevice* pRefDev )
{
pEditEngine->SetRefDevice( pRefDev );
for ( sal_Int32 n = pParaList->GetParagraphCount(); n; )
{
Paragraph* pPara = pParaList->GetParagraph( --n );
pPara->Invalidate();
}
}
void Outliner::ParaAttribsChanged( sal_Int32 nPara )
{
// The Outliner does not have an undo of its own, when paragraphs are
// separated/merged. When ParagraphInserted the attribute EE_PARA_OUTLLEVEL
// may not be set, this is however needed when the depth of the paragraph
// is to be determined.
if (!pEditEngine->IsInUndo())
return;
if (pParaList->GetParagraphCount() != pEditEngine->GetParagraphCount())
return;
Paragraph* pPara = pParaList->GetParagraph(nPara);
if (!pPara)
return;
// tdf#100734: force update of bullet
pPara->Invalidate();
const SfxInt16Item& rLevel = pEditEngine->GetParaAttrib( nPara, EE_PARA_OUTLLEVEL );
if (pPara->GetDepth() == rLevel.GetValue())
return;
pPara->SetDepth(rLevel.GetValue());
ImplCalcBulletText(nPara, true, true);
}
void Outliner::StyleSheetChanged( SfxStyleSheet const * pStyle )
{
// The EditEngine calls StyleSheetChanged also for derived styles.
// Here all the paragraphs, which had the said template, used to be
// hunted by a ImpRecalcParaAttribs, why?
// => only the Bullet-representation can really change...
sal_Int32 nParas = pParaList->GetParagraphCount();
for( sal_Int32 nPara = 0; nPara < nParas; nPara++ )
{
if ( pEditEngine->GetStyleSheet( nPara ) == pStyle )
{
ImplCheckNumBulletItem( nPara );
ImplCalcBulletText( nPara, false, false );
// EditEngine formats changed paragraphs before calling this method,
// so they are not reformatted now and use wrong bullet indent
pEditEngine->QuickMarkInvalid( ESelection( nPara, 0, nPara, 0 ) );
}
}
}
tools::Rectangle Outliner::ImpCalcBulletArea( sal_Int32 nPara, bool bAdjust, bool bReturnPaperPos )
{
// Bullet area within the paragraph ...
tools::Rectangle aBulletArea;
const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
if ( pFmt )
{
Point aTopLeft;
Size aBulletSize( ImplGetBulletSize( nPara ) );
bool bOutlineMode = bool( pEditEngine->GetControlWord() & EEControlBits::OUTLINER );
// the ODF attribute text:space-before which holds the spacing to add to the left of the label
const auto nSpaceBefore = pFmt->GetAbsLSpace() + pFmt->GetFirstLineOffset();
const SvxLRSpaceItem& rLR = pEditEngine->GetParaAttrib( nPara, bOutlineMode ? EE_PARA_OUTLLRSPACE : EE_PARA_LRSPACE );
aTopLeft.setX( rLR.GetTextLeft() + rLR.GetTextFirstLineOfst() + nSpaceBefore );
long nBulletWidth = std::max( static_cast<long>(-rLR.GetTextFirstLineOfst()), static_cast<long>((-pFmt->GetFirstLineOffset()) + pFmt->GetCharTextDistance()) );
if ( nBulletWidth < aBulletSize.Width() ) // The Bullet creates its space
nBulletWidth = aBulletSize.Width();
if ( bAdjust && !bOutlineMode )
{
// Adjust when centered or align right
const SvxAdjustItem& rItem = pEditEngine->GetParaAttrib( nPara, EE_PARA_JUST );
if ( ( !pEditEngine->IsRightToLeft( nPara ) && ( rItem.GetAdjust() != SvxAdjust::Left ) ) ||
( pEditEngine->IsRightToLeft( nPara ) && ( rItem.GetAdjust() != SvxAdjust::Right ) ) )
{
aTopLeft.setX( pEditEngine->GetFirstLineStartX( nPara ) - nBulletWidth );
}
}
// Vertical:
ParagraphInfos aInfos = pEditEngine->GetParagraphInfos( nPara );
if ( aInfos.bValid )
{
aTopLeft.setY( /* aInfos.nFirstLineOffset + */ // nFirstLineOffset is already added to the StartPos (PaintBullet) from the EditEngine
aInfos.nFirstLineHeight - aInfos.nFirstLineTextHeight
+ aInfos.nFirstLineTextHeight / 2
- aBulletSize.Height() / 2 );
// may prefer to print out on the baseline ...
if( ( pFmt->GetNumberingType() != SVX_NUM_NUMBER_NONE ) && ( pFmt->GetNumberingType() != SVX_NUM_BITMAP ) && ( pFmt->GetNumberingType() != SVX_NUM_CHAR_SPECIAL ) )
{
vcl::Font aBulletFont( ImpCalcBulletFont( nPara ) );
if ( aBulletFont.GetCharSet() != RTL_TEXTENCODING_SYMBOL )
{
OutputDevice* pRefDev = pEditEngine->GetRefDevice();
vcl::Font aOldFont = pRefDev->GetFont();
pRefDev->SetFont( aBulletFont );
FontMetric aMetric( pRefDev->GetFontMetric() );
// Leading on the first line ...
aTopLeft.setY( /* aInfos.nFirstLineOffset + */ aInfos.nFirstLineMaxAscent );
aTopLeft.AdjustY( -(aMetric.GetAscent()) );
pRefDev->SetFont( aOldFont );
}
}
}
// Horizontal:
if( pFmt->GetNumAdjust() == SvxAdjust::Right )
{
aTopLeft.AdjustX(nBulletWidth - aBulletSize.Width() );
}
else if( pFmt->GetNumAdjust() == SvxAdjust::Center )
{
aTopLeft.AdjustX(( nBulletWidth - aBulletSize.Width() ) / 2 );
}
if ( aTopLeft.X() < 0 ) // then push
aTopLeft.setX( 0 );
aBulletArea = tools::Rectangle( aTopLeft, aBulletSize );
}
if ( bReturnPaperPos )
{
Size aBulletSize( aBulletArea.GetSize() );
Point aBulletDocPos( aBulletArea.TopLeft() );
aBulletDocPos.AdjustY(pEditEngine->GetDocPosTopLeft( nPara ).Y() );
Point aBulletPos( aBulletDocPos );
if ( IsVertical() )
{
aBulletPos.setY( aBulletDocPos.X() );
aBulletPos.setX( GetPaperSize().Width() - aBulletDocPos.Y() );
// Rotate:
aBulletPos.AdjustX( -(aBulletSize.Height()) );
Size aSz( aBulletSize );
aBulletSize.setWidth( aSz.Height() );
aBulletSize.setHeight( aSz.Width() );
}
else if ( pEditEngine->IsRightToLeft( nPara ) )
{
aBulletPos.setX( GetPaperSize().Width() - aBulletDocPos.X() - aBulletSize.Width() );
}
aBulletArea = tools::Rectangle( aBulletPos, aBulletSize );
}
return aBulletArea;
}
EBulletInfo Outliner::GetBulletInfo( sal_Int32 nPara )
{
EBulletInfo aInfo;
aInfo.nParagraph = nPara;
aInfo.bVisible = ImplHasNumberFormat( nPara );
const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
aInfo.nType = pFmt ? pFmt->GetNumberingType() : 0;
if( pFmt )
{
if( pFmt->GetNumberingType() != SVX_NUM_BITMAP )
{
aInfo.aText = ImplGetBulletText( nPara );
if( pFmt->GetBulletFont() )
aInfo.aFont = *pFmt->GetBulletFont();
}
else if ( pFmt->GetBrush()->GetGraphicObject() )
{
aInfo.aGraphic = pFmt->GetBrush()->GetGraphicObject()->GetGraphic();
}
}
if ( aInfo.bVisible )
{
aInfo.aBounds = ImpCalcBulletArea( nPara, true, true );
}
return aInfo;
}
OUString Outliner::GetText( Paragraph const * pParagraph, sal_Int32 nCount ) const
{
OUStringBuffer aText;
sal_Int32 nStartPara = pParaList->GetAbsPos( pParagraph );
for ( sal_Int32 n = 0; n < nCount; n++ )
{
aText.append(pEditEngine->GetText( nStartPara + n ));
if ( (n+1) < nCount )
aText.append("\n");
}
return aText.makeStringAndClear();
}
void Outliner::Remove( Paragraph const * pPara, sal_Int32 nParaCount )
{
sal_Int32 nPos = pParaList->GetAbsPos( pPara );
if( !nPos && ( nParaCount >= pParaList->GetParagraphCount() ) )
{
Clear();
}
else
{
for( sal_Int32 n = 0; n < nParaCount; n++ )
pEditEngine->RemoveParagraph( nPos );
}
}
void Outliner::StripPortions()
{
bStrippingPortions = true;
pEditEngine->StripPortions();
bStrippingPortions = false;
}
void Outliner::DrawingText( const Point& rStartPos, const OUString& rText, sal_Int32 nTextStart,
sal_Int32 nTextLen, const long* pDXArray,const SvxFont& rFont,
sal_Int32 nPara, sal_uInt8 nRightToLeft,
const EEngineData::WrongSpellVector* pWrongSpellVector,
const SvxFieldData* pFieldData,
bool bEndOfLine,
bool bEndOfParagraph,
bool bEndOfBullet,
const css::lang::Locale* pLocale,
const Color& rOverlineColor,
const Color& rTextLineColor)
{
if(aDrawPortionHdl.IsSet())
{
DrawPortionInfo aInfo( rStartPos, rText, nTextStart, nTextLen, rFont, nPara, pDXArray, pWrongSpellVector,
pFieldData, pLocale, rOverlineColor, rTextLineColor, nRightToLeft, false, 0, bEndOfLine, bEndOfParagraph, bEndOfBullet);
aDrawPortionHdl.Call( &aInfo );
}
}
void Outliner::DrawingTab( const Point& rStartPos, long nWidth, const OUString& rChar, const SvxFont& rFont,
sal_Int32 nPara, sal_uInt8 nRightToLeft, bool bEndOfLine, bool bEndOfParagraph,
const Color& rOverlineColor, const Color& rTextLineColor)
{
if(aDrawPortionHdl.IsSet())
{
DrawPortionInfo aInfo( rStartPos, rChar, 0, rChar.getLength(), rFont, nPara, nullptr, nullptr,
nullptr, nullptr, rOverlineColor, rTextLineColor, nRightToLeft, true, nWidth, bEndOfLine, bEndOfParagraph, false);
aDrawPortionHdl.Call( &aInfo );
}
}
bool Outliner::RemovingPagesHdl( OutlinerView* pView )
{
return !aRemovingPagesHdl.IsSet() || aRemovingPagesHdl.Call( pView );
}
bool Outliner::ImpCanDeleteSelectedPages( OutlinerView* pCurView, sal_Int32 _nFirstPage, sal_Int32 nPages )
{
nDepthChangedHdlPrevDepth = nPages;
mnFirstSelPage = _nFirstPage;
return RemovingPagesHdl( pCurView );
}
SfxItemSet const & Outliner::GetParaAttribs( sal_Int32 nPara )
{
return pEditEngine->GetParaAttribs( nPara );
}
IMPL_LINK( Outliner, ParaVisibleStateChangedHdl, Paragraph&, rPara, void )
{
sal_Int32 nPara = pParaList->GetAbsPos( &rPara );
pEditEngine->ShowParagraph( nPara, rPara.IsVisible() );
}
IMPL_LINK_NOARG(Outliner, BeginMovingParagraphsHdl, MoveParagraphsInfo&, void)
{
if( !IsInUndo() )
aBeginMovingHdl.Call( this );
}
IMPL_LINK( Outliner, BeginPasteOrDropHdl, PasteOrDropInfos&, rInfos, void )
{
UndoActionStart( EDITUNDO_DRAGANDDROP );
maBeginPasteOrDropHdl.Call(&rInfos);
}
IMPL_LINK( Outliner, EndPasteOrDropHdl, PasteOrDropInfos&, rInfos, void )
{
bPasting = false;
ImpTextPasted( rInfos.nStartPara, rInfos.nEndPara - rInfos.nStartPara + 1 );
maEndPasteOrDropHdl.Call( &rInfos );
UndoActionEnd();
}
IMPL_LINK( Outliner, EndMovingParagraphsHdl, MoveParagraphsInfo&, rInfos, void )
{
pParaList->MoveParagraphs( rInfos.nStartPara, rInfos.nDestPara, rInfos.nEndPara - rInfos.nStartPara + 1 );
sal_Int32 nChangesStart = std::min( rInfos.nStartPara, rInfos.nDestPara );
sal_Int32 nParas = pParaList->GetParagraphCount();
for ( sal_Int32 n = nChangesStart; n < nParas; n++ )
ImplCalcBulletText( n, false, false );
if( !IsInUndo() )
aEndMovingHdl.Call( this );
}
static bool isSameNumbering( const SvxNumberFormat& rN1, const SvxNumberFormat& rN2 )
{
if( rN1.GetNumberingType() != rN2.GetNumberingType() )
return false;
if( rN1.GetNumStr(1) != rN2.GetNumStr(1) )
return false;
if( (rN1.GetPrefix() != rN2.GetPrefix()) || (rN1.GetSuffix() != rN2.GetSuffix()) )
return false;
return true;
}
sal_uInt16 Outliner::ImplGetNumbering( sal_Int32 nPara, const SvxNumberFormat* pParaFmt )
{
sal_uInt16 nNumber = pParaFmt->GetStart() - 1;
Paragraph* pPara = pParaList->GetParagraph( nPara );
const sal_Int16 nParaDepth = pPara->GetDepth();
do
{
pPara = pParaList->GetParagraph( nPara );
const sal_Int16 nDepth = pPara->GetDepth();
// ignore paragraphs that are below our paragraph or have no numbering
if( (nDepth > nParaDepth) || (nDepth == -1) )
continue;
// stop on paragraphs that are above our paragraph
if( nDepth < nParaDepth )
break;
const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
if( pFmt == nullptr )
continue; // ignore paragraphs without bullets
// check if numbering less than or equal to pParaFmt
if( !isSameNumbering( *pFmt, *pParaFmt ) || ( pFmt->GetStart() < pParaFmt->GetStart() ) )
break;
if ( pFmt->GetStart() > pParaFmt->GetStart() )
{
nNumber += pFmt->GetStart() - pParaFmt->GetStart();
pParaFmt = pFmt;
}
const SfxBoolItem& rBulletState = pEditEngine->GetParaAttrib( nPara, EE_PARA_BULLETSTATE );
if( rBulletState.GetValue() )
nNumber += 1;
// same depth, same number format, check for restart
const sal_Int16 nNumberingStartValue = pPara->GetNumberingStartValue();
if( (nNumberingStartValue != -1) || pPara->IsParaIsNumberingRestart() )
{
if( nNumberingStartValue != -1 )
nNumber += nNumberingStartValue - 1;
break;
}
}
while( nPara-- );
return nNumber;
}
void Outliner::ImplCalcBulletText( sal_Int32 nPara, bool bRecalcLevel, bool bRecalcChildren )
{
Paragraph* pPara = pParaList->GetParagraph( nPara );
while ( pPara )
{
OUString aBulletText;
const SvxNumberFormat* pFmt = GetNumberFormat( nPara );
if( pFmt && ( pFmt->GetNumberingType() != SVX_NUM_BITMAP ) )
{
aBulletText += pFmt->GetPrefix();
if( pFmt->GetNumberingType() == SVX_NUM_CHAR_SPECIAL )
{
aBulletText += OUStringLiteral1(pFmt->GetBulletChar());
}
else if( pFmt->GetNumberingType() != SVX_NUM_NUMBER_NONE )
{
aBulletText += pFmt->GetNumStr( ImplGetNumbering( nPara, pFmt ) );
}
aBulletText += pFmt->GetSuffix();
}
if (pPara->GetText() != aBulletText)
pPara->SetText( aBulletText );
pPara->nFlags &= (~ParaFlag::SETBULLETTEXT);
if ( bRecalcLevel )
{
sal_Int16 nDepth = pPara->GetDepth();
pPara = pParaList->GetParagraph( ++nPara );
if ( !bRecalcChildren )
{
while ( pPara && ( pPara->GetDepth() > nDepth ) )
pPara = pParaList->GetParagraph( ++nPara );
}
if ( pPara && ( pPara->GetDepth() < nDepth ) )
pPara = nullptr;
}
else
{
pPara = nullptr;
}
}
}
void Outliner::Clear()
{
if( !bFirstParaIsEmpty )
{
ImplBlockInsertionCallbacks( true );
pEditEngine->Clear();
pParaList->Clear();
pParaList->Append( std::unique_ptr<Paragraph>(new Paragraph( nMinDepth )));
bFirstParaIsEmpty = true;
ImplBlockInsertionCallbacks( false );
}
else
{
Paragraph* pPara = pParaList->GetParagraph( 0 );
if(pPara)
pPara->SetDepth( nMinDepth );
}
}
void Outliner::SetFlatMode( bool bFlat )
{
if( bFlat != pEditEngine->IsFlatMode() )
{
for ( sal_Int32 nPara = pParaList->GetParagraphCount(); nPara; )
pParaList->GetParagraph( --nPara )->aBulSize.setWidth( -1 );
pEditEngine->SetFlatMode( bFlat );
}
}
OUString Outliner::ImplGetBulletText( sal_Int32 nPara )
{
OUString aRes;
Paragraph* pPara = pParaList->GetParagraph( nPara );
if (pPara)
{
// Enable optimization again ...
// if( pPara->nFlags & ParaFlag::SETBULLETTEXT )
ImplCalcBulletText( nPara, false, false );
aRes = pPara->GetText();
}
return aRes;
}
// this is needed for StarOffice Api
void Outliner::SetLevelDependentStyleSheet( sal_Int32 nPara )
{
SfxItemSet aOldAttrs( pEditEngine->GetParaAttribs( nPara ) );
ImplSetLevelDependentStyleSheet( nPara );
pEditEngine->SetParaAttribs( nPara, aOldAttrs );
}
void Outliner::ImplBlockInsertionCallbacks( bool b )
{
if ( b )
{
nBlockInsCallback++;
}
else
{
DBG_ASSERT( nBlockInsCallback, "ImplBlockInsertionCallbacks ?!" );
nBlockInsCallback--;
if ( !nBlockInsCallback )
{
// Call blocked notify events...
while(!pEditEngine->aNotifyCache.empty())
{
EENotify aNotify(pEditEngine->aNotifyCache.front());
// Remove from list before calling, maybe we enter LeaveBlockNotifications while calling the handler...
pEditEngine->aNotifyCache.erase(pEditEngine->aNotifyCache.begin());
pEditEngine->aOutlinerNotifyHdl.Call( aNotify );
}
}
}
}
IMPL_LINK( Outliner, EditEngineNotifyHdl, EENotify&, rNotify, void )
{
if ( !nBlockInsCallback )
pEditEngine->aOutlinerNotifyHdl.Call( rNotify );
else
pEditEngine->aNotifyCache.push_back(rNotify);
}
/** sets a link that is called at the beginning of a drag operation at an edit view */
void Outliner::SetBeginDropHdl( const Link<EditView*,void>& rLink )
{
pEditEngine->SetBeginDropHdl( rLink );
}
/** sets a link that is called at the end of a drag operation at an edit view */
void Outliner::SetEndDropHdl( const Link<EditView*,void>& rLink )
{
pEditEngine->SetEndDropHdl( rLink );
}
/** sets a link that is called before a drop or paste operation. */
void Outliner::SetBeginPasteOrDropHdl( const Link<PasteOrDropInfos*,void>& rLink )
{
maBeginPasteOrDropHdl = rLink;
}
/** sets a link that is called after a drop or paste operation. */
void Outliner::SetEndPasteOrDropHdl( const Link<PasteOrDropInfos*,void>& rLink )
{
maEndPasteOrDropHdl = rLink;
}
void Outliner::SetParaFlag( Paragraph* pPara, ParaFlag nFlag )
{
if( pPara && !pPara->HasFlag( nFlag ) )
{
if( IsUndoEnabled() && !IsInUndo() )
InsertUndo( new OutlinerUndoChangeParaFlags( this, GetAbsPos( pPara ), pPara->nFlags, pPara->nFlags|nFlag ) );
pPara->SetFlag( nFlag );
}
}
bool Outliner::HasParaFlag( const Paragraph* pPara, ParaFlag nFlag )
{
return pPara && pPara->HasFlag( nFlag );
}
bool Outliner::IsPageOverflow()
{
return pEditEngine->IsPageOverflow();
}
NonOverflowingText *Outliner::GetNonOverflowingText() const
{
/* XXX:
* nCount should be the number of paragraphs of the non overflowing text
* nStart should be the starting paragraph of the non overflowing text (XXX: Always 0?)
*/
if ( GetParagraphCount() < 1 )
return nullptr;
// last non-overflowing paragraph is before the first overflowing one
sal_Int32 nCount = pEditEngine->GetOverflowingParaNum();
sal_Int32 nOverflowLine = pEditEngine->GetOverflowingLineNum(); // XXX: Unused for now
// Defensive check: overflowing para index beyond actual # of paragraphs?
if ( nCount > GetParagraphCount()-1) {
SAL_INFO("editeng.chaining",
"[Overflowing] Ops, trying to retrieve para "
<< nCount << " when max index is " << GetParagraphCount()-1 );
return nullptr;
}
if (nCount < 0)
{
SAL_INFO("editeng.chaining",
"[Overflowing] No Overflowing text but GetNonOverflowinText called?!");
return nullptr;
}
// NOTE: We want the selection of the overflowing text from here
// At the same time we may want to consider the beginning of such text
// in a more fine grained way (i.e. as GetNonOverflowingText did)
/*
sal_Int32 nHeadPara = pEditEngine->GetOverflowingParaNum();
sal_uInt32 nParaCount = GetParagraphCount();
sal_uInt32 nLen = 0;
for ( sal_Int32 nLine = 0;
nLine < pEditEngine->GetOverflowingLineNum();
nLine++) {
nLen += GetLineLen(nHeadPara, nLine);
}
sal_uInt32 nOverflowingPara = pEditEngine->GetOverflowingParaNum();
ESelection aOverflowingTextSel;
sal_Int32 nLastPara = nParaCount-1;
sal_Int32 nLastParaLen = GetText(GetParagraph(nLastPara)).getLength();
aOverflowingTextSel = ESelection(nOverflowingPara, nLen,
nLastPara, nLastParaLen);
bool bLastParaInterrupted =
pEditEngine->GetOverflowingLineNum() > 0;
return new NonOverflowingText(aOverflowingTextSel, bLastParaInterrupted);
**/
// Only overflowing text, i.e. 1st line of 1st paragraph overflowing
bool bItAllOverflew = nCount == 0 && nOverflowLine == 0;
if ( bItAllOverflew )
{
ESelection aEmptySel(0,0,0,0);
//EditTextObject *pTObj = pEditEngine->CreateTextObject(aEmptySel);
bool const bLastParaInterrupted = true; // Last Para was interrupted since everything overflew
return new NonOverflowingText(aEmptySel, bLastParaInterrupted);
} else { // Get the lines that of the overflowing para fit in the box
sal_Int32 nOverflowingPara = nCount;
sal_uInt32 nLen = 0;
for ( sal_Int32 nLine = 0;
nLine < pEditEngine->GetOverflowingLineNum();
nLine++)
{
nLen += GetLineLen(nOverflowingPara, nLine);
}
//sal_Int32 nStartPara = 0;
//sal_Int32 nStartPos = 0;
ESelection aOverflowingTextSelection;
const sal_Int32 nEndPara = GetParagraphCount()-1;
const sal_Int32 nEndPos = pEditEngine->GetTextLen(nEndPara);
if (nLen == 0) {
// XXX: What happens inside this case might be dependent on the joining paragraph or not-thingy
// Overflowing paragraph is empty or first line overflowing: it's not "Non-Overflowing" text then
sal_Int32 nParaLen = GetText(GetParagraph(nOverflowingPara-1)).getLength();
aOverflowingTextSelection =
ESelection(nOverflowingPara-1, nParaLen, nEndPara, nEndPos);
} else {
// We take until we have to from the overflowing paragraph
aOverflowingTextSelection =
ESelection(nOverflowingPara, nLen, nEndPara, nEndPos);
}
//EditTextObject *pTObj = pEditEngine->CreateTextObject(aNonOverflowingTextSelection);
//sal_Int32 nLastLine = GetLineCount(nOverflowingPara)-1;
bool bLastParaInterrupted =
pEditEngine->GetOverflowingLineNum() > 0;
return new NonOverflowingText(aOverflowingTextSelection, bLastParaInterrupted);
}
}
std::unique_ptr<OutlinerParaObject> Outliner::GetEmptyParaObject() const
{
std::unique_ptr<EditTextObject> pEmptyText = pEditEngine->GetEmptyTextObject();
std::unique_ptr<OutlinerParaObject> pPObj( new OutlinerParaObject( std::move(pEmptyText) ));
pPObj->SetOutlinerMode(GetMode());
return pPObj;
}
OverflowingText *Outliner::GetOverflowingText() const
{
if ( pEditEngine->GetOverflowingParaNum() < 0)
return nullptr;
// Defensive check: overflowing para index beyond actual # of paragraphs?
if ( pEditEngine->GetOverflowingParaNum() > GetParagraphCount()-1) {
SAL_INFO("editeng.chaining",
"[Overflowing] Ops, trying to retrieve para "
<< pEditEngine->GetOverflowingParaNum() << " when max index is "
<< GetParagraphCount()-1 );
return nullptr;
}
sal_Int32 nHeadPara = pEditEngine->GetOverflowingParaNum();
sal_uInt32 nParaCount = GetParagraphCount();
sal_uInt32 nLen = 0;
for ( sal_Int32 nLine = 0;
nLine < pEditEngine->GetOverflowingLineNum();
nLine++) {
nLen += GetLineLen(nHeadPara, nLine);
}
sal_uInt32 nOverflowingPara = pEditEngine->GetOverflowingParaNum();
ESelection aOverflowingTextSel;
sal_Int32 nLastPara = nParaCount-1;
sal_Int32 nLastParaLen = GetText(GetParagraph(nLastPara)).getLength();
aOverflowingTextSel = ESelection(nOverflowingPara, nLen,
nLastPara, nLastParaLen);
return new OverflowingText(pEditEngine->CreateTransferable(aOverflowingTextSel));
}
void Outliner::ClearOverflowingParaNum()
{
pEditEngine->ClearOverflowingParaNum();
}
void Outliner::dumpAsXml(struct _xmlTextWriter* pWriter) const
{
bool bOwns = false;
if (!pWriter)
{
pWriter = xmlNewTextWriterFilename("outliner.xml", 0);
xmlTextWriterSetIndent(pWriter,1);
xmlTextWriterSetIndentString(pWriter, BAD_CAST(" "));
xmlTextWriterStartDocument(pWriter, nullptr, nullptr, nullptr);
bOwns = true;
}
xmlTextWriterStartElement(pWriter, BAD_CAST("Outliner"));
pParaList->dumpAsXml(pWriter);
xmlTextWriterEndElement(pWriter);
if (bOwns)
{
xmlTextWriterEndDocument(pWriter);
xmlFreeTextWriter(pWriter);
}
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V560 A part of conditional expression is always false: (pPara->nFlags != nPrevFlags).