/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <memory>
#include <utility>
#include <comphelper/lok.hxx>
#include <config_global.h>
#include <vcl/wrkwin.hxx>
#include <vcl/dialog.hxx>
#include <vcl/weld.hxx>
#include <vcl/svapp.hxx>
#include <svtools/ctrltool.hxx>
#include <editeng/svxfont.hxx>
#include "impedit.hxx"
#include <editeng/editeng.hxx>
#include <editeng/editview.hxx>
#include <editeng/editstat.hxx>
#include "editdbg.hxx"
#include <eerdll2.hxx>
#include <editeng/eerdll.hxx>
#include <editeng/editrids.hrc>
#include <editeng.hxx>
#include <editeng/acorrcfg.hxx>
#include <editeng/flditem.hxx>
#include <editeng/txtrange.hxx>
#include <editeng/cmapitem.hxx>
#include <vcl/graph.hxx>
#include <editeng/autokernitem.hxx>
#include <editeng/contouritem.hxx>
#include <editeng/colritem.hxx>
#include <editeng/crossedoutitem.hxx>
#include <editeng/escapementitem.hxx>
#include <editeng/fhgtitem.hxx>
#include <editeng/fontitem.hxx>
#include <editeng/kernitem.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/postitem.hxx>
#include <editeng/shdditem.hxx>
#include <editeng/udlnitem.hxx>
#include <editeng/wghtitem.hxx>
#include <editeng/wrlmitem.hxx>
#include <editeng/brushitem.hxx>
#include <editeng/langitem.hxx>
#include <editeng/emphasismarkitem.hxx>
#include <editeng/charscaleitem.hxx>
#include <editeng/charreliefitem.hxx>
#include <sot/exchange.hxx>
#include <sot/formats.hxx>
#include <editeng/numitem.hxx>
#include <editeng/bulletitem.hxx>
#include <editeng/unolingu.hxx>
#include <linguistic/lngprops.hxx>
#include <i18nlangtag/mslangid.hxx>
#include <rtl/strbuf.hxx>
#include <sal/log.hxx>
#include <vcl/help.hxx>
#include <com/sun/star/datatransfer/clipboard/XClipboard.hpp>
#include <com/sun/star/i18n/InputSequenceCheckMode.hpp>
#include <svl/srchdefs.hxx>
#if OSL_DEBUG_LEVEL > 1
#include <editeng/frmdiritem.hxx>
#endif
#include <basegfx/polygon/b2dpolygon.hxx>
using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::linguistic2;
#if (OSL_DEBUG_LEVEL > 1) || defined ( DBG_UTIL )
static bool bDebugPaint = false;
#endif
static SfxItemPool* pGlobalPool=nullptr;
EditEngine::EditEngine( SfxItemPool* pItemPool )
{
pImpEditEngine.reset( new ImpEditEngine( this, pItemPool ) );
}
EditEngine::~EditEngine()
{
}
void EditEngine::EnableUndo( bool bEnable )
{
pImpEditEngine->EnableUndo( bEnable );
}
bool EditEngine::IsUndoEnabled()
{
return pImpEditEngine->IsUndoEnabled();
}
bool EditEngine::IsInUndo()
{
return pImpEditEngine->IsInUndo();
}
SfxUndoManager& EditEngine::GetUndoManager()
{
return pImpEditEngine->GetUndoManager();
}
SfxUndoManager* EditEngine::SetUndoManager(SfxUndoManager* pNew)
{
return pImpEditEngine->SetUndoManager(pNew);
}
void EditEngine::UndoActionStart( sal_uInt16 nId )
{
DBG_ASSERT( !pImpEditEngine->IsInUndo(), "Calling UndoActionStart in Undomode!" );
if ( !pImpEditEngine->IsInUndo() )
pImpEditEngine->UndoActionStart( nId );
}
void EditEngine::UndoActionStart(sal_uInt16 nId, const ESelection& rSel)
{
pImpEditEngine->UndoActionStart(nId, rSel);
}
void EditEngine::UndoActionEnd()
{
DBG_ASSERT( !pImpEditEngine->IsInUndo(), "Calling UndoActionEnd in Undomode!" );
if ( !pImpEditEngine->IsInUndo() )
pImpEditEngine->UndoActionEnd();
}
bool EditEngine::HasTriedMergeOnLastAddUndo() const
{
return pImpEditEngine->mbLastTryMerge;
}
void EditEngine::SetRefDevice( OutputDevice* pRefDev )
{
pImpEditEngine->SetRefDevice( pRefDev );
}
OutputDevice* EditEngine::GetRefDevice() const
{
return pImpEditEngine->GetRefDevice();
}
void EditEngine::SetRefMapMode( const MapMode& rMapMode )
{
pImpEditEngine->SetRefMapMode( rMapMode );
}
MapMode const & EditEngine::GetRefMapMode()
{
return pImpEditEngine->GetRefMapMode();
}
void EditEngine::SetBackgroundColor( const Color& rColor )
{
pImpEditEngine->SetBackgroundColor( rColor );
}
Color const & EditEngine::GetBackgroundColor() const
{
return pImpEditEngine->GetBackgroundColor();
}
Color EditEngine::GetAutoColor() const
{
return pImpEditEngine->GetAutoColor();
}
void EditEngine::EnableAutoColor( bool b )
{
pImpEditEngine->EnableAutoColor( b );
}
void EditEngine::ForceAutoColor( bool b )
{
pImpEditEngine->ForceAutoColor( b );
}
bool EditEngine::IsForceAutoColor() const
{
return pImpEditEngine->IsForceAutoColor();
}
const SfxItemSet& EditEngine::GetEmptyItemSet()
{
return pImpEditEngine->GetEmptyItemSet();
}
void EditEngine::Draw( OutputDevice* pOutDev, const tools::Rectangle& rOutRect )
{
Draw( pOutDev, rOutRect, Point( 0, 0 ) );
}
void EditEngine::Draw( OutputDevice* pOutDev, const Point& rStartPos, short nOrientation )
{
// Create with 2 points, as with positive points it will end up with
// LONGMAX as Size, Bottom and Right in the range > LONGMAX.
tools::Rectangle aBigRect( -0x3FFFFFFF, -0x3FFFFFFF, 0x3FFFFFFF, 0x3FFFFFFF );
if( pOutDev->GetConnectMetaFile() )
pOutDev->Push();
Point aStartPos( rStartPos );
if ( IsVertical() )
{
aStartPos.AdjustX(GetPaperSize().Width() );
aStartPos = Rotate( aStartPos, nOrientation, rStartPos );
}
pImpEditEngine->Paint( pOutDev, aBigRect, aStartPos, false, nOrientation );
if( pOutDev->GetConnectMetaFile() )
pOutDev->Pop();
}
void EditEngine::Draw( OutputDevice* pOutDev, const tools::Rectangle& rOutRect, const Point& rStartDocPos )
{
Draw( pOutDev, rOutRect, rStartDocPos, true );
}
void EditEngine::Draw( OutputDevice* pOutDev, const tools::Rectangle& rOutRect, const Point& rStartDocPos, bool bClip )
{
#if defined( DBG_UTIL ) || (OSL_DEBUG_LEVEL > 1)
if ( bDebugPaint )
EditDbg::ShowEditEngineData( this, false );
#endif
// Align to the pixel boundary, so that it becomes exactly the same
// as Paint ()
tools::Rectangle aOutRect( pOutDev->LogicToPixel( rOutRect ) );
aOutRect = pOutDev->PixelToLogic( aOutRect );
Point aStartPos;
if ( !IsVertical() )
{
aStartPos.setX( aOutRect.Left() - rStartDocPos.X() );
aStartPos.setY( aOutRect.Top() - rStartDocPos.Y() );
}
else
{
aStartPos.setX( aOutRect.Right() + rStartDocPos.Y() );
aStartPos.setY( aOutRect.Top() - rStartDocPos.X() );
}
bool bClipRegion = pOutDev->IsClipRegion();
bool bMetafile = pOutDev->GetConnectMetaFile();
vcl::Region aOldRegion = pOutDev->GetClipRegion();
// If one existed => intersection!
// Use Push/pop for creating the Meta file
if ( bMetafile )
pOutDev->Push();
// Always use the Intersect method, it is a must for Metafile!
if ( bClip )
{
// Clip only if necessary...
if ( rStartDocPos.X() || rStartDocPos.Y() ||
( rOutRect.GetHeight() < static_cast<long>(GetTextHeight()) ) ||
( rOutRect.GetWidth() < static_cast<long>(CalcTextWidth()) ) )
{
// Some printer drivers cause problems if characters graze the
// ClipRegion, therefore rather add a pixel more ...
tools::Rectangle aClipRect( aOutRect );
if ( pOutDev->GetOutDevType() == OUTDEV_PRINTER )
{
Size aPixSz( 1, 0 );
aPixSz = pOutDev->PixelToLogic( aPixSz );
aClipRect.AdjustRight(aPixSz.Width() );
aClipRect.AdjustBottom(aPixSz.Width() );
}
pOutDev->IntersectClipRegion( aClipRect );
}
}
pImpEditEngine->Paint( pOutDev, aOutRect, aStartPos );
if ( bMetafile )
pOutDev->Pop();
else if ( bClipRegion )
pOutDev->SetClipRegion( aOldRegion );
else
pOutDev->SetClipRegion();
}
void EditEngine::InsertView(EditView* pEditView, size_t nIndex)
{
if ( nIndex > pImpEditEngine->GetEditViews().size() )
nIndex = pImpEditEngine->GetEditViews().size();
ImpEditEngine::ViewsType& rViews = pImpEditEngine->GetEditViews();
rViews.insert(rViews.begin()+nIndex, pEditView);
EditSelection aStartSel;
aStartSel = pImpEditEngine->GetEditDoc().GetStartPaM();
pEditView->pImpEditView->SetEditSelection( aStartSel );
if ( !pImpEditEngine->GetActiveView() )
pImpEditEngine->SetActiveView( pEditView );
pEditView->pImpEditView->AddDragAndDropListeners();
}
EditView* EditEngine::RemoveView( EditView* pView )
{
pView->HideCursor();
EditView* pRemoved = nullptr;
ImpEditEngine::ViewsType& rViews = pImpEditEngine->GetEditViews();
ImpEditEngine::ViewsType::iterator it = std::find(rViews.begin(), rViews.end(), pView);
DBG_ASSERT( it != rViews.end(), "RemoveView with invalid index" );
if (it != rViews.end())
{
pRemoved = *it;
rViews.erase(it);
if ( pImpEditEngine->GetActiveView() == pView )
{
pImpEditEngine->SetActiveView( nullptr );
pImpEditEngine->GetSelEngine().SetCurView( nullptr );
}
pView->pImpEditView->RemoveDragAndDropListeners();
}
return pRemoved;
}
void EditEngine::RemoveView(size_t nIndex)
{
ImpEditEngine::ViewsType& rViews = pImpEditEngine->GetEditViews();
if (nIndex >= rViews.size())
return;
EditView* pView = rViews[nIndex];
if ( pView )
RemoveView( pView );
}
EditView* EditEngine::GetView(size_t nIndex) const
{
return pImpEditEngine->GetEditViews()[nIndex];
}
size_t EditEngine::GetViewCount() const
{
return pImpEditEngine->GetEditViews().size();
}
bool EditEngine::HasView( EditView* pView ) const
{
ImpEditEngine::ViewsType& rViews = pImpEditEngine->GetEditViews();
return std::find(rViews.begin(), rViews.end(), pView) != rViews.end();
}
EditView* EditEngine::GetActiveView() const
{
return pImpEditEngine->GetActiveView();
}
void EditEngine::SetActiveView(EditView* pView)
{
pImpEditEngine->SetActiveView(pView);
}
void EditEngine::SetDefTab( sal_uInt16 nDefTab )
{
pImpEditEngine->GetEditDoc().SetDefTab( nDefTab );
if ( pImpEditEngine->IsFormatted() )
{
pImpEditEngine->FormatFullDoc();
pImpEditEngine->UpdateViews();
}
}
void EditEngine::SetPaperSize( const Size& rNewSize )
{
Size aOldSize( pImpEditEngine->GetPaperSize() );
pImpEditEngine->SetValidPaperSize( rNewSize );
Size aNewSize( pImpEditEngine->GetPaperSize() );
bool bAutoPageSize = pImpEditEngine->GetStatus().AutoPageSize();
if ( bAutoPageSize || ( aNewSize.Width() != aOldSize.Width() ) )
{
for (EditView* pView : pImpEditEngine->aEditViews)
{
if ( bAutoPageSize )
pView->pImpEditView->RecalcOutputArea();
else if ( pView->pImpEditView->DoAutoSize() )
{
pView->pImpEditView->ResetOutputArea( tools::Rectangle(
pView->pImpEditView->GetOutputArea().TopLeft(), aNewSize ) );
}
}
if ( bAutoPageSize || pImpEditEngine->IsFormatted() )
{
// Changing the width has no effect for AutoPageSize, as this is
// determined by the text width.
// Optimization first after Vobis delivery was enabled ...
pImpEditEngine->FormatFullDoc();
pImpEditEngine->UpdateViews( pImpEditEngine->GetActiveView() );
if ( pImpEditEngine->GetUpdateMode() && pImpEditEngine->GetActiveView() )
pImpEditEngine->pActiveView->ShowCursor( false, false );
}
}
}
const Size& EditEngine::GetPaperSize() const
{
return pImpEditEngine->GetPaperSize();
}
void EditEngine::SetVertical( bool bVertical, bool bTopToBottom )
{
pImpEditEngine->SetVertical( bVertical, bTopToBottom);
}
bool EditEngine::IsVertical() const
{
return pImpEditEngine->IsVertical();
}
bool EditEngine::IsTopToBottom() const
{
return pImpEditEngine->IsTopToBottom();
}
void EditEngine::SetFixedCellHeight( bool bUseFixedCellHeight )
{
pImpEditEngine->SetFixedCellHeight( bUseFixedCellHeight );
}
void EditEngine::SetDefaultHorizontalTextDirection( EEHorizontalTextDirection eHTextDir )
{
pImpEditEngine->SetDefaultHorizontalTextDirection( eHTextDir );
}
EEHorizontalTextDirection EditEngine::GetDefaultHorizontalTextDirection() const
{
return pImpEditEngine->GetDefaultHorizontalTextDirection();
}
SvtScriptType EditEngine::GetScriptType( const ESelection& rSelection ) const
{
EditSelection aSel( pImpEditEngine->CreateSel( rSelection ) );
return pImpEditEngine->GetItemScriptType( aSel );
}
LanguageType EditEngine::GetLanguage(const EditPaM& rPaM) const
{
return pImpEditEngine->GetLanguage(rPaM);
}
LanguageType EditEngine::GetLanguage( sal_Int32 nPara, sal_Int32 nPos ) const
{
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( nPara );
DBG_ASSERT( pNode, "GetLanguage - nPara is invalid!" );
return pNode ? pImpEditEngine->GetLanguage( EditPaM( pNode, nPos ) ) : LANGUAGE_DONTKNOW;
}
void EditEngine::TransliterateText( const ESelection& rSelection, TransliterationFlags nTransliterationMode )
{
pImpEditEngine->TransliterateText( pImpEditEngine->CreateSel( rSelection ), nTransliterationMode );
}
EditSelection EditEngine::TransliterateText(const EditSelection& rSelection, TransliterationFlags nTransliterationMode)
{
return pImpEditEngine->TransliterateText(rSelection, nTransliterationMode);
}
void EditEngine::SetAsianCompressionMode( CharCompressType n )
{
pImpEditEngine->SetAsianCompressionMode( n );
}
void EditEngine::SetKernAsianPunctuation( bool b )
{
pImpEditEngine->SetKernAsianPunctuation( b );
}
void EditEngine::SetAddExtLeading( bool b )
{
pImpEditEngine->SetAddExtLeading( b );
}
void EditEngine::SetPolygon( const basegfx::B2DPolyPolygon& rPolyPolygon )
{
SetPolygon( rPolyPolygon, nullptr );
}
void EditEngine::SetPolygon(const basegfx::B2DPolyPolygon& rPolyPolygon, const basegfx::B2DPolyPolygon* pLinePolyPolygon)
{
bool bSimple(false);
if(pLinePolyPolygon && 1 == rPolyPolygon.count())
{
if(rPolyPolygon.getB2DPolygon(0).isClosed())
{
// open polygon
bSimple = true;
}
}
TextRanger* pRanger = new TextRanger( rPolyPolygon, pLinePolyPolygon, 30, 2, 2, bSimple, true );
pImpEditEngine->SetTextRanger( std::unique_ptr<TextRanger>(pRanger) );
pImpEditEngine->SetPaperSize( pRanger->GetBoundRect().GetSize() );
}
void EditEngine::ClearPolygon()
{
pImpEditEngine->SetTextRanger( nullptr );
}
const Size& EditEngine::GetMinAutoPaperSize() const
{
return pImpEditEngine->GetMinAutoPaperSize();
}
void EditEngine::SetMinAutoPaperSize( const Size& rSz )
{
pImpEditEngine->SetMinAutoPaperSize( rSz );
}
const Size& EditEngine::GetMaxAutoPaperSize() const
{
return pImpEditEngine->GetMaxAutoPaperSize();
}
void EditEngine::SetMaxAutoPaperSize( const Size& rSz )
{
pImpEditEngine->SetMaxAutoPaperSize( rSz );
}
OUString EditEngine::GetText( LineEnd eEnd ) const
{
return pImpEditEngine->GetEditDoc().GetText( eEnd );
}
OUString EditEngine::GetText( const ESelection& rESelection ) const
{
EditSelection aSel( pImpEditEngine->CreateSel( rESelection ) );
return pImpEditEngine->GetSelected( aSel );
}
sal_uInt32 EditEngine::GetTextLen() const
{
return pImpEditEngine->GetEditDoc().GetTextLen();
}
sal_Int32 EditEngine::GetParagraphCount() const
{
return pImpEditEngine->aEditDoc.Count();
}
sal_Int32 EditEngine::GetLineCount( sal_Int32 nParagraph ) const
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
return pImpEditEngine->GetLineCount( nParagraph );
}
sal_Int32 EditEngine::GetLineLen( sal_Int32 nParagraph, sal_Int32 nLine ) const
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
return pImpEditEngine->GetLineLen( nParagraph, nLine );
}
void EditEngine::GetLineBoundaries( /*out*/sal_Int32& rStart, /*out*/sal_Int32& rEnd, sal_Int32 nParagraph, sal_Int32 nLine ) const
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
return pImpEditEngine->GetLineBoundaries( rStart, rEnd, nParagraph, nLine );
}
sal_Int32 EditEngine::GetLineNumberAtIndex( sal_Int32 nPara, sal_Int32 nIndex ) const
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
return pImpEditEngine->GetLineNumberAtIndex( nPara, nIndex );
}
sal_uInt32 EditEngine::GetLineHeight( sal_Int32 nParagraph )
{
// If someone calls GetLineHeight() with an empty Engine.
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
return pImpEditEngine->GetLineHeight( nParagraph, 0 );
}
tools::Rectangle EditEngine::GetParaBounds( sal_Int32 nPara )
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
Point aPnt = GetDocPosTopLeft( nPara );
if( IsVertical() )
{
sal_Int32 nTextHeight = pImpEditEngine->GetTextHeight();
sal_Int32 nParaWidth = pImpEditEngine->CalcParaWidth( nPara, true );
sal_uLong nParaHeight = pImpEditEngine->GetParaHeight( nPara );
return tools::Rectangle( nTextHeight - aPnt.Y() - nParaHeight, 0, nTextHeight - aPnt.Y(), nParaWidth );
}
else
{
sal_Int32 nParaWidth = pImpEditEngine->CalcParaWidth( nPara, true );
sal_uLong nParaHeight = pImpEditEngine->GetParaHeight( nPara );
return tools::Rectangle( 0, aPnt.Y(), nParaWidth, aPnt.Y() + nParaHeight );
}
}
sal_uInt32 EditEngine::GetTextHeight( sal_Int32 nParagraph ) const
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
sal_uInt32 nHeight = pImpEditEngine->GetParaHeight( nParagraph );
return nHeight;
}
OUString EditEngine::GetWord( sal_Int32 nPara, sal_Int32 nIndex )
{
ESelection aESel( nPara, nIndex, nPara, nIndex );
EditSelection aSel( pImpEditEngine->CreateSel( aESel ) );
aSel = pImpEditEngine->SelectWord( aSel );
return pImpEditEngine->GetSelected( aSel );
}
ESelection EditEngine::GetWord( const ESelection& rSelection, sal_uInt16 nWordType ) const
{
// ImpEditEngine-Iteration-Methods should be const!
EditEngine* pE = const_cast<EditEngine*>(this);
EditSelection aSel( pE->pImpEditEngine->CreateSel( rSelection ) );
aSel = pE->pImpEditEngine->SelectWord( aSel, nWordType );
return pE->pImpEditEngine->CreateESel( aSel );
}
void EditEngine::CursorMoved(const ContentNode* pPrevNode)
{
pImpEditEngine->CursorMoved(pPrevNode);
}
void EditEngine::CheckIdleFormatter()
{
pImpEditEngine->CheckIdleFormatter();
}
bool EditEngine::IsIdleFormatterActive() const
{
return pImpEditEngine->aIdleFormatter.IsActive();
}
ParaPortion* EditEngine::FindParaPortion(ContentNode const * pNode)
{
return pImpEditEngine->FindParaPortion(pNode);
}
const ParaPortion* EditEngine::FindParaPortion(ContentNode const * pNode) const
{
return pImpEditEngine->FindParaPortion(pNode);
}
const ParaPortion* EditEngine::GetPrevVisPortion(const ParaPortion* pCurPortion) const
{
return pImpEditEngine->GetPrevVisPortion(pCurPortion);
}
SvtScriptType EditEngine::GetScriptType(const EditSelection& rSel) const
{
return pImpEditEngine->GetItemScriptType(rSel);
}
void EditEngine::RemoveParaPortion(sal_Int32 nNode)
{
pImpEditEngine->GetParaPortions().Remove(nNode);
}
void EditEngine::SetCallParaInsertedOrDeleted(bool b)
{
pImpEditEngine->SetCallParaInsertedOrDeleted(b);
}
bool EditEngine::IsCallParaInsertedOrDeleted() const
{
return pImpEditEngine->IsCallParaInsertedOrDeleted();
}
void EditEngine::AppendDeletedNodeInfo(DeletedNodeInfo* pInfo)
{
pImpEditEngine->aDeletedNodes.push_back(std::unique_ptr<DeletedNodeInfo>(pInfo));
}
void EditEngine::UpdateSelections()
{
pImpEditEngine->UpdateSelections();
}
void EditEngine::InsertContent(ContentNode* pNode, sal_Int32 nPos)
{
pImpEditEngine->InsertContent(pNode, nPos);
}
EditPaM EditEngine::SplitContent(sal_Int32 nNode, sal_Int32 nSepPos)
{
return pImpEditEngine->SplitContent(nNode, nSepPos);
}
EditPaM EditEngine::ConnectContents(sal_Int32 nLeftNode, bool bBackward)
{
return pImpEditEngine->ConnectContents(nLeftNode, bBackward);
}
void EditEngine::InsertFeature(const EditSelection& rEditSelection, const SfxPoolItem& rItem)
{
pImpEditEngine->ImpInsertFeature(rEditSelection, rItem);
}
EditSelection EditEngine::MoveParagraphs(const Range& rParagraphs, sal_Int32 nNewPos)
{
return pImpEditEngine->MoveParagraphs(rParagraphs, nNewPos, nullptr);
}
void EditEngine::RemoveCharAttribs(sal_Int32 nPara, sal_uInt16 nWhich, bool bRemoveFeatures)
{
pImpEditEngine->RemoveCharAttribs(nPara, nWhich, bRemoveFeatures);
}
void EditEngine::RemoveCharAttribs(const EditSelection& rSel, bool bRemoveParaAttribs, sal_uInt16 nWhich)
{
pImpEditEngine->RemoveCharAttribs(rSel, bRemoveParaAttribs, nWhich);
}
EditEngine::ViewsType& EditEngine::GetEditViews()
{
return pImpEditEngine->GetEditViews();
}
const EditEngine::ViewsType& EditEngine::GetEditViews() const
{
return pImpEditEngine->GetEditViews();
}
void EditEngine::SetUndoMode(bool b)
{
pImpEditEngine->SetUndoMode(b);
}
void EditEngine::FormatAndUpdate(EditView* pCurView, bool bCalledFromUndo)
{
pImpEditEngine->FormatAndUpdate(pCurView, bCalledFromUndo);
}
void EditEngine::Undo(EditView* pView)
{
pImpEditEngine->Undo(pView);
}
void EditEngine::Redo(EditView* pView)
{
pImpEditEngine->Redo(pView);
}
uno::Reference<datatransfer::XTransferable> EditEngine::CreateTransferable(const EditSelection& rSelection)
{
return pImpEditEngine->CreateTransferable(rSelection);
}
void EditEngine::ParaAttribsToCharAttribs(ContentNode* pNode)
{
pImpEditEngine->ParaAttribsToCharAttribs(pNode);
}
EditPaM EditEngine::CreateEditPaM(const EPaM& rEPaM)
{
return pImpEditEngine->CreateEditPaM(rEPaM);
}
EditPaM EditEngine::ConnectParagraphs(
ContentNode* pLeft, ContentNode* pRight, bool bBackward)
{
return pImpEditEngine->ImpConnectParagraphs(pLeft, pRight, bBackward);
}
EditPaM EditEngine::InsertField(const EditSelection& rEditSelection, const SvxFieldItem& rFld)
{
return pImpEditEngine->InsertField(rEditSelection, rFld);
}
EditPaM EditEngine::InsertText(const EditSelection& aCurEditSelection, const OUString& rStr)
{
return pImpEditEngine->InsertText(aCurEditSelection, rStr);
}
EditSelection EditEngine::InsertText(const EditTextObject& rTextObject, const EditSelection& rSel)
{
return pImpEditEngine->InsertText(rTextObject, rSel);
}
EditSelection EditEngine::InsertText(
uno::Reference<datatransfer::XTransferable > const & rxDataObj,
const OUString& rBaseURL, const EditPaM& rPaM, bool bUseSpecial)
{
return pImpEditEngine->PasteText(rxDataObj, rBaseURL, rPaM, bUseSpecial);
}
EditPaM EditEngine::EndOfWord(const EditPaM& rPaM)
{
return pImpEditEngine->EndOfWord(rPaM);
}
EditPaM EditEngine::GetPaM(const Point& aDocPos, bool bSmart)
{
return pImpEditEngine->GetPaM(aDocPos, bSmart);
}
EditSelection EditEngine::SelectWord(
const EditSelection& rCurSelection, sal_Int16 nWordType)
{
return pImpEditEngine->SelectWord(rCurSelection, nWordType);
}
long EditEngine::GetXPos(
const ParaPortion* pParaPortion, const EditLine* pLine, sal_Int32 nIndex, bool bPreferPortionStart) const
{
return pImpEditEngine->GetXPos(pParaPortion, pLine, nIndex, bPreferPortionStart);
}
Range EditEngine::GetLineXPosStartEnd(
const ParaPortion* pParaPortion, const EditLine* pLine) const
{
return pImpEditEngine->GetLineXPosStartEnd(pParaPortion, pLine);
}
bool EditEngine::IsFormatted() const
{
return pImpEditEngine->IsFormatted();
}
EditPaM EditEngine::CursorLeft(const EditPaM& rPaM, sal_uInt16 nCharacterIteratorMode)
{
return pImpEditEngine->CursorLeft(rPaM, nCharacterIteratorMode);
}
EditPaM EditEngine::CursorRight(const EditPaM& rPaM, sal_uInt16 nCharacterIteratorMode)
{
return pImpEditEngine->CursorRight(rPaM, nCharacterIteratorMode);
}
sal_uInt16 EditEngine::GetOnePixelInRef() const
{
return pImpEditEngine->nOnePixelInRef;
}
InternalEditStatus& EditEngine::GetInternalEditStatus()
{
return pImpEditEngine->GetStatus();
}
EditDoc& EditEngine::GetEditDoc()
{
return pImpEditEngine->GetEditDoc();
}
const EditDoc& EditEngine::GetEditDoc() const
{
return pImpEditEngine->GetEditDoc();
}
void EditEngine::dumpAsXmlEditDoc(struct _xmlTextWriter* pWriter) const
{
pImpEditEngine->GetEditDoc().dumpAsXml(pWriter);
}
ParaPortionList& EditEngine::GetParaPortions()
{
return pImpEditEngine->GetParaPortions();
}
const ParaPortionList& EditEngine::GetParaPortions() const
{
return pImpEditEngine->GetParaPortions();
}
void EditEngine::SeekCursor(ContentNode* pNode, sal_Int32 nPos, SvxFont& rFont)
{
pImpEditEngine->SeekCursor(pNode, nPos, rFont);
}
EditPaM EditEngine::DeleteSelection(const EditSelection& rSel)
{
return pImpEditEngine->ImpDeleteSelection(rSel);
}
ESelection EditEngine::CreateESelection(const EditSelection& rSel)
{
return pImpEditEngine->CreateESel(rSel);
}
EditSelection EditEngine::CreateSelection(const ESelection& rSel)
{
return pImpEditEngine->CreateSel(rSel);
}
const SfxItemSet& EditEngine::GetBaseParaAttribs(sal_Int32 nPara) const
{
return pImpEditEngine->GetParaAttribs(nPara);
}
void EditEngine::SetParaAttribsOnly(sal_Int32 nPara, const SfxItemSet& rSet)
{
pImpEditEngine->SetParaAttribs(nPara, rSet);
}
void EditEngine::SetAttribs(const EditSelection& rSel, const SfxItemSet& rSet, SetAttribsMode nSpecial)
{
pImpEditEngine->SetAttribs(rSel, rSet, nSpecial);
}
OUString EditEngine::GetSelected(const EditSelection& rSel) const
{
return pImpEditEngine->GetSelected(rSel);
}
EditPaM EditEngine::DeleteSelected(const EditSelection& rSel)
{
return pImpEditEngine->DeleteSelected(rSel);
}
void EditEngine::HandleBeginPasteOrDrop(PasteOrDropInfos& rInfos)
{
pImpEditEngine->aBeginPasteOrDropHdl.Call(rInfos);
}
void EditEngine::HandleEndPasteOrDrop(PasteOrDropInfos& rInfos)
{
pImpEditEngine->aEndPasteOrDropHdl.Call(rInfos);
}
bool EditEngine::HasText() const
{
return pImpEditEngine->ImplHasText();
}
const EditSelectionEngine& EditEngine::GetSelectionEngine() const
{
return pImpEditEngine->aSelEngine;
}
void EditEngine::SetInSelectionMode(bool b)
{
pImpEditEngine->bInSelection = b;
}
bool EditEngine::PostKeyEvent( const KeyEvent& rKeyEvent, EditView* pEditView, vcl::Window const * pFrameWin )
{
DBG_ASSERT( pEditView, "no View - no cookie !" );
bool bDone = true;
bool bModified = false;
bool bMoved = false;
bool bAllowIdle = true;
bool bReadOnly = pEditView->IsReadOnly();
GetCursorFlags nNewCursorFlags = GetCursorFlags::NONE;
bool bSetCursorFlags = true;
EditSelection aCurSel( pEditView->pImpEditView->GetEditSelection() );
DBG_ASSERT( !aCurSel.IsInvalid(), "Blinde Selection in EditEngine::PostKeyEvent" );
OUString aAutoText( pImpEditEngine->GetAutoCompleteText() );
if (!pImpEditEngine->GetAutoCompleteText().isEmpty())
pImpEditEngine->SetAutoCompleteText(OUString(), true);
sal_uInt16 nCode = rKeyEvent.GetKeyCode().GetCode();
KeyFuncType eFunc = rKeyEvent.GetKeyCode().GetFunction();
if ( eFunc != KeyFuncType::DONTKNOW )
{
switch ( eFunc )
{
case KeyFuncType::UNDO:
{
if ( !bReadOnly )
pEditView->Undo();
return true;
}
case KeyFuncType::REDO:
{
if ( !bReadOnly )
pEditView->Redo();
return true;
}
default: // is then possible edited below.
eFunc = KeyFuncType::DONTKNOW;
}
}
if ( eFunc == KeyFuncType::DONTKNOW )
{
switch ( nCode )
{
#if defined( DBG_UTIL ) || (OSL_DEBUG_LEVEL > 1)
case KEY_F1:
{
if ( rKeyEvent.GetKeyCode().IsMod1() && rKeyEvent.GetKeyCode().IsMod2() )
{
sal_Int32 nParas = GetParagraphCount();
Point aPos;
Point aViewStart( pEditView->GetOutputArea().TopLeft() );
long n20 = 40 * pImpEditEngine->nOnePixelInRef;
for ( sal_Int32 n = 0; n < nParas; n++ )
{
long nH = GetTextHeight( n );
Point P1( aViewStart.X() + n20 + n20*(n%2), aViewStart.Y() + aPos.Y() );
Point P2( P1 );
P2.AdjustX(n20 );
P2.AdjustY(nH );
pEditView->GetWindow()->SetLineColor();
pEditView->GetWindow()->SetFillColor( (n%2) ? COL_YELLOW : COL_LIGHTGREEN );
pEditView->GetWindow()->DrawRect( tools::Rectangle( P1, P2 ) );
aPos.AdjustY(nH );
}
}
bDone = false;
}
break;
case KEY_F11:
{
if ( rKeyEvent.GetKeyCode().IsMod1() && rKeyEvent.GetKeyCode().IsMod2() )
{
bDebugPaint = !bDebugPaint;
OStringBuffer aInfo("DebugPaint: ");
aInfo.append(bDebugPaint ? "On" : "Off");
std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(nullptr,
VclMessageType::Info, VclButtonsType::Ok,
OStringToOUString(aInfo.makeStringAndClear(), RTL_TEXTENCODING_ASCII_US)));
xInfoBox->run();
}
bDone = false;
}
break;
case KEY_F12:
{
if ( rKeyEvent.GetKeyCode().IsMod1() && rKeyEvent.GetKeyCode().IsMod2() )
{
EditDbg::ShowEditEngineData( this );
}
bDone = false;
}
break;
#endif
case KEY_UP:
case KEY_DOWN:
case KEY_LEFT:
case KEY_RIGHT:
case KEY_HOME:
case KEY_END:
case KEY_PAGEUP:
case KEY_PAGEDOWN:
case css::awt::Key::MOVE_WORD_FORWARD:
case css::awt::Key::SELECT_WORD_FORWARD:
case css::awt::Key::MOVE_WORD_BACKWARD:
case css::awt::Key::SELECT_WORD_BACKWARD:
case css::awt::Key::MOVE_TO_BEGIN_OF_LINE:
case css::awt::Key::MOVE_TO_END_OF_LINE:
case css::awt::Key::SELECT_TO_BEGIN_OF_LINE:
case css::awt::Key::SELECT_TO_END_OF_LINE:
case css::awt::Key::MOVE_TO_BEGIN_OF_PARAGRAPH:
case css::awt::Key::MOVE_TO_END_OF_PARAGRAPH:
case css::awt::Key::SELECT_TO_BEGIN_OF_PARAGRAPH:
case css::awt::Key::SELECT_TO_END_OF_PARAGRAPH:
case css::awt::Key::MOVE_TO_BEGIN_OF_DOCUMENT:
case css::awt::Key::MOVE_TO_END_OF_DOCUMENT:
case css::awt::Key::SELECT_TO_BEGIN_OF_DOCUMENT:
case css::awt::Key::SELECT_TO_END_OF_DOCUMENT:
{
if ( !rKeyEvent.GetKeyCode().IsMod2() || ( nCode == KEY_LEFT ) || ( nCode == KEY_RIGHT ) )
{
if ( pImpEditEngine->DoVisualCursorTraveling() && ( ( nCode == KEY_LEFT ) || ( nCode == KEY_RIGHT ) /* || ( nCode == KEY_HOME ) || ( nCode == KEY_END ) */ ) )
bSetCursorFlags = false; // Will be manipulated within visual cursor move
aCurSel = pImpEditEngine->MoveCursor( rKeyEvent, pEditView );
if ( aCurSel.HasRange() ) {
Reference<css::datatransfer::clipboard::XClipboard> aSelection(pEditView->GetWindow()->GetPrimarySelection());
pEditView->pImpEditView->CutCopy( aSelection, false );
}
bMoved = true;
if ( nCode == KEY_HOME )
nNewCursorFlags |= GetCursorFlags::StartOfLine;
else if ( nCode == KEY_END )
nNewCursorFlags |= GetCursorFlags::EndOfLine;
}
#if OSL_DEBUG_LEVEL > 1
GetLanguage( pImpEditEngine->GetEditDoc().GetPos( aCurSel.Max().GetNode() ), aCurSel.Max().GetIndex() );
#endif
}
break;
case KEY_BACKSPACE:
case KEY_DELETE:
case css::awt::Key::DELETE_WORD_BACKWARD:
case css::awt::Key::DELETE_WORD_FORWARD:
case css::awt::Key::DELETE_TO_BEGIN_OF_PARAGRAPH:
case css::awt::Key::DELETE_TO_END_OF_PARAGRAPH:
{
if ( !bReadOnly && !rKeyEvent.GetKeyCode().IsMod2() )
{
// check if we are behind a bullet and using the backspace key
ContentNode *pNode = aCurSel.Min().GetNode();
const SvxNumberFormat *pFmt = pImpEditEngine->GetNumberFormat( pNode );
if (pFmt && nCode == KEY_BACKSPACE &&
!aCurSel.HasRange() && aCurSel.Min().GetIndex() == 0)
{
// if the bullet is still visible, just make it invisible.
// Otherwise continue as usual.
sal_Int32 nPara = pImpEditEngine->GetEditDoc().GetPos( pNode );
SfxBoolItem aBulletState( pImpEditEngine->GetParaAttrib( nPara, EE_PARA_BULLETSTATE ) );
if ( aBulletState.GetValue() )
{
aBulletState.SetValue( false );
SfxItemSet aSet( pImpEditEngine->GetParaAttribs( nPara ) );
aSet.Put( aBulletState );
pImpEditEngine->SetParaAttribs( nPara, aSet );
// have this and the following paragraphs formatted and repainted.
// (not painting a numbering in the list may cause the following
// numberings to have different numbers than before and thus the
// length may have changed as well )
pImpEditEngine->FormatAndUpdate( pImpEditEngine->GetActiveView() );
break;
}
}
sal_uInt8 nDel = 0;
DeleteMode nMode = DeleteMode::Simple;
switch( nCode )
{
case css::awt::Key::DELETE_WORD_BACKWARD:
nMode = DeleteMode::RestOfWord;
nDel = DEL_LEFT;
break;
case css::awt::Key::DELETE_WORD_FORWARD:
nMode = DeleteMode::RestOfWord;
nDel = DEL_RIGHT;
break;
case css::awt::Key::DELETE_TO_BEGIN_OF_PARAGRAPH:
nMode = DeleteMode::RestOfContent;
nDel = DEL_LEFT;
break;
case css::awt::Key::DELETE_TO_END_OF_PARAGRAPH:
nMode = DeleteMode::RestOfContent;
nDel = DEL_RIGHT;
break;
default:
nDel = ( nCode == KEY_DELETE ) ? DEL_RIGHT : DEL_LEFT;
nMode = rKeyEvent.GetKeyCode().IsMod1() ? DeleteMode::RestOfWord : DeleteMode::Simple;
if ( ( nMode == DeleteMode::RestOfWord ) && rKeyEvent.GetKeyCode().IsShift() )
nMode = DeleteMode::RestOfContent;
break;
}
pEditView->pImpEditView->DrawSelectionXOR();
pImpEditEngine->UndoActionStart( EDITUNDO_DELETE );
aCurSel = pImpEditEngine->DeleteLeftOrRight( aCurSel, nDel, nMode );
pImpEditEngine->UndoActionEnd();
bModified = true;
bAllowIdle = false;
}
}
break;
case KEY_TAB:
{
if ( !bReadOnly && !rKeyEvent.GetKeyCode().IsMod1() && !rKeyEvent.GetKeyCode().IsMod2() )
{
bool bShift = rKeyEvent.GetKeyCode().IsShift();
if ( pImpEditEngine->GetStatus().DoTabIndenting() &&
( aCurSel.Min().GetNode() != aCurSel.Max().GetNode() ) )
{
pImpEditEngine->IndentBlock( pEditView, !bShift );
}
else if ( !bShift )
{
bool bSel = pEditView->HasSelection();
if ( bSel )
pImpEditEngine->UndoActionStart( EDITUNDO_INSERT );
if ( pImpEditEngine->GetStatus().DoAutoCorrect() )
aCurSel = pImpEditEngine->AutoCorrect( aCurSel, 0, !pEditView->IsInsertMode(), pFrameWin );
aCurSel = pImpEditEngine->InsertTab( aCurSel );
if ( bSel )
pImpEditEngine->UndoActionEnd();
bModified = true;
}
}
else
bDone = false;
}
break;
case KEY_RETURN:
{
if ( !bReadOnly )
{
pEditView->pImpEditView->DrawSelectionXOR();
if ( !rKeyEvent.GetKeyCode().IsMod1() && !rKeyEvent.GetKeyCode().IsMod2() )
{
pImpEditEngine->UndoActionStart( EDITUNDO_INSERT );
if ( rKeyEvent.GetKeyCode().IsShift() )
{
aCurSel = pImpEditEngine->AutoCorrect( aCurSel, 0, !pEditView->IsInsertMode(), pFrameWin );
aCurSel = pImpEditEngine->InsertLineBreak( aCurSel );
}
else
{
if (aAutoText.isEmpty())
{
if ( pImpEditEngine->GetStatus().DoAutoCorrect() )
aCurSel = pImpEditEngine->AutoCorrect( aCurSel, 0, !pEditView->IsInsertMode(), pFrameWin );
aCurSel = pImpEditEngine->InsertParaBreak( aCurSel );
}
else
{
DBG_ASSERT( !aCurSel.HasRange(), "Selection on complete?!" );
EditPaM aStart( pImpEditEngine->WordLeft( aCurSel.Max() ) );
aCurSel = pImpEditEngine->InsertText(
EditSelection( aStart, aCurSel.Max() ), aAutoText );
pImpEditEngine->SetAutoCompleteText( OUString(), true );
}
}
pImpEditEngine->UndoActionEnd();
bModified = true;
}
}
}
break;
case KEY_INSERT:
{
if ( !rKeyEvent.GetKeyCode().IsMod1() && !rKeyEvent.GetKeyCode().IsMod2() )
pEditView->SetInsertMode( !pEditView->IsInsertMode() );
}
break;
default:
{
#if (OSL_DEBUG_LEVEL > 1) && defined(DBG_UTIL)
if ( ( nCode == KEY_W ) && rKeyEvent.GetKeyCode().IsMod1() && rKeyEvent.GetKeyCode().IsMod2() )
{
SfxItemSet aAttribs = pEditView->GetAttribs();
const SvxFrameDirectionItem& rCurrentWritingMode = (const SvxFrameDirectionItem&)aAttribs.Get( EE_PARA_WRITINGDIR );
SvxFrameDirectionItem aNewItem( SvxFrameDirection::Horizontal_LR_TB, EE_PARA_WRITINGDIR );
if ( rCurrentWritingMode.GetValue() != SvxFrameDirection::Horizontal_RL_TB )
aNewItem.SetValue( SvxFrameDirection::Horizontal_RL_TB );
aAttribs.Put( aNewItem );
pEditView->SetAttribs( aAttribs );
}
#endif
if ( !bReadOnly && IsSimpleCharInput( rKeyEvent ) )
{
sal_Unicode nCharCode = rKeyEvent.GetCharCode();
pEditView->pImpEditView->DrawSelectionXOR();
// Autocorrection?
if ( ( pImpEditEngine->GetStatus().DoAutoCorrect() ) &&
( SvxAutoCorrect::IsAutoCorrectChar( nCharCode ) ||
pImpEditEngine->IsNbspRunNext() ) )
{
aCurSel = pImpEditEngine->AutoCorrect(
aCurSel, nCharCode, !pEditView->IsInsertMode(), pFrameWin );
}
else
{
aCurSel = pImpEditEngine->InsertTextUserInput( aCurSel, nCharCode, !pEditView->IsInsertMode() );
}
// AutoComplete ???
if ( pImpEditEngine->GetStatus().DoAutoComplete() && ( nCharCode != ' ' ) )
{
// Only at end of word...
sal_Int32 nIndex = aCurSel.Max().GetIndex();
if ( ( nIndex >= aCurSel.Max().GetNode()->Len() ) ||
( pImpEditEngine->aWordDelimiters.indexOf( aCurSel.Max().GetNode()->GetChar( nIndex ) ) != -1 ) )
{
EditPaM aStart( pImpEditEngine->WordLeft( aCurSel.Max() ) );
OUString aWord = pImpEditEngine->GetSelected( EditSelection( aStart, aCurSel.Max() ) );
if ( aWord.getLength() >= 3 )
{
OUString aComplete;
LanguageType eLang = pImpEditEngine->GetLanguage( EditPaM( aStart.GetNode(), aStart.GetIndex()+1));
LanguageTag aLanguageTag( eLang);
if (!pImpEditEngine->xLocaleDataWrapper.isInitialized())
pImpEditEngine->xLocaleDataWrapper.init( SvtSysLocale().GetLocaleData().getComponentContext(), aLanguageTag);
else
pImpEditEngine->xLocaleDataWrapper.changeLocale( aLanguageTag);
if (!pImpEditEngine->xTransliterationWrapper.isInitialized())
pImpEditEngine->xTransliterationWrapper.init( SvtSysLocale().GetLocaleData().getComponentContext(), eLang);
else
pImpEditEngine->xTransliterationWrapper.changeLocale( eLang);
const ::utl::TransliterationWrapper* pTransliteration = pImpEditEngine->xTransliterationWrapper.get();
Sequence< i18n::CalendarItem2 > xItem = pImpEditEngine->xLocaleDataWrapper->getDefaultCalendarDays();
sal_Int32 nCount = xItem.getLength();
const i18n::CalendarItem2* pArr = xItem.getArray();
for( sal_Int32 n = 0; n <= nCount; ++n )
{
const OUString& rDay = pArr[n].FullName;
if( pTransliteration->isMatch( aWord, rDay) )
{
aComplete = rDay;
break;
}
}
if ( aComplete.isEmpty() )
{
xItem = pImpEditEngine->xLocaleDataWrapper->getDefaultCalendarMonths();
sal_Int32 nMonthCount = xItem.getLength();
const i18n::CalendarItem2* pMonthArr = xItem.getArray();
for( sal_Int32 n = 0; n <= nMonthCount; ++n )
{
const OUString& rMon = pMonthArr[n].FullName;
if( pTransliteration->isMatch( aWord, rMon) )
{
aComplete = rMon;
break;
}
}
}
if( !aComplete.isEmpty() && ( ( aWord.getLength() + 1 ) < aComplete.getLength() ) )
{
pImpEditEngine->SetAutoCompleteText( aComplete, false );
Point aPos = pImpEditEngine->PaMtoEditCursor( aCurSel.Max() ).TopLeft();
aPos = pEditView->pImpEditView->GetWindowPos( aPos );
aPos = pEditView->pImpEditView->GetWindow()->LogicToPixel( aPos );
aPos = pEditView->GetWindow()->OutputToScreenPixel( aPos );
aPos.AdjustY( -3 );
Help::ShowQuickHelp( pEditView->GetWindow(), tools::Rectangle( aPos, Size( 1, 1 ) ), aComplete, QuickHelpFlags::Bottom|QuickHelpFlags::Left );
}
}
}
}
bModified = true;
}
else
bDone = false;
}
}
}
pEditView->pImpEditView->SetEditSelection( aCurSel );
if (comphelper::LibreOfficeKit::isActive())
{
pEditView->pImpEditView->DrawSelectionXOR();
}
pImpEditEngine->UpdateSelections();
if ( ( !IsVertical() && ( nCode != KEY_UP ) && ( nCode != KEY_DOWN ) ) ||
( IsVertical() && ( nCode != KEY_LEFT ) && ( nCode != KEY_RIGHT ) ))
{
pEditView->pImpEditView->nTravelXPos = TRAVEL_X_DONTKNOW;
}
if ( /* ( nCode != KEY_HOME ) && ( nCode != KEY_END ) && */
( !IsVertical() && ( nCode != KEY_LEFT ) && ( nCode != KEY_RIGHT ) ) ||
( IsVertical() && ( nCode != KEY_UP ) && ( nCode != KEY_DOWN ) ))
{
pEditView->pImpEditView->SetCursorBidiLevel( CURSOR_BIDILEVEL_DONTKNOW );
}
if ( bSetCursorFlags )
pEditView->pImpEditView->nExtraCursorFlags = nNewCursorFlags;
if ( bModified )
{
DBG_ASSERT( !bReadOnly, "ReadOnly but modified???" );
// Idle-Formatter only when AnyInput.
if ( bAllowIdle && pImpEditEngine->GetStatus().UseIdleFormatter()
&& Application::AnyInput( VclInputFlags::KEYBOARD) )
pImpEditEngine->IdleFormatAndUpdate( pEditView );
else
pImpEditEngine->FormatAndUpdate( pEditView );
}
else if ( bMoved )
{
bool bGotoCursor = pEditView->pImpEditView->DoAutoScroll();
pEditView->pImpEditView->ShowCursor( bGotoCursor, true );
pImpEditEngine->CallStatusHdl();
}
return bDone;
}
sal_uInt32 EditEngine::GetTextHeight() const
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
sal_uInt32 nHeight = !IsVertical() ? pImpEditEngine->GetTextHeight() : pImpEditEngine->CalcTextWidth( true );
return nHeight;
}
sal_uInt32 EditEngine::GetTextHeightNTP() const
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
if ( IsVertical() )
return pImpEditEngine->CalcTextWidth( true );
return pImpEditEngine->GetTextHeightNTP();
}
sal_uInt32 EditEngine::CalcTextWidth()
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
sal_uInt32 nWidth = !IsVertical() ? pImpEditEngine->CalcTextWidth( true ) : pImpEditEngine->GetTextHeight();
return nWidth;
}
void EditEngine::SetUpdateMode( bool bUpdate )
{
pImpEditEngine->SetUpdateMode( bUpdate );
if ( pImpEditEngine->pActiveView )
pImpEditEngine->pActiveView->ShowCursor( false, false, /*bActivate=*/true );
}
bool EditEngine::GetUpdateMode() const
{
return pImpEditEngine->GetUpdateMode();
}
void EditEngine::Clear()
{
pImpEditEngine->Clear();
}
void EditEngine::SetText( const OUString& rText )
{
pImpEditEngine->SetText( rText );
if ( !rText.isEmpty() )
pImpEditEngine->FormatAndUpdate();
}
ErrCode EditEngine::Read( SvStream& rInput, const OUString& rBaseURL, EETextFormat eFormat, SvKeyValueIterator* pHTTPHeaderAttrs /* = NULL */ )
{
bool bUndoEnabled = pImpEditEngine->IsUndoEnabled();
pImpEditEngine->EnableUndo( false );
pImpEditEngine->SetText( OUString() );
EditPaM aPaM( pImpEditEngine->GetEditDoc().GetStartPaM() );
pImpEditEngine->Read( rInput, rBaseURL, eFormat, EditSelection( aPaM, aPaM ), pHTTPHeaderAttrs );
pImpEditEngine->EnableUndo( bUndoEnabled );
return rInput.GetError();
}
void EditEngine::Write( SvStream& rOutput, EETextFormat eFormat )
{
EditPaM aStartPaM( pImpEditEngine->GetEditDoc().GetStartPaM() );
EditPaM aEndPaM( pImpEditEngine->GetEditDoc().GetEndPaM() );
pImpEditEngine->Write( rOutput, eFormat, EditSelection( aStartPaM, aEndPaM ) );
}
std::unique_ptr<EditTextObject> EditEngine::CreateTextObject()
{
return pImpEditEngine->CreateTextObject();
}
std::unique_ptr<EditTextObject> EditEngine::CreateTextObject( const ESelection& rESelection )
{
EditSelection aSel( pImpEditEngine->CreateSel( rESelection ) );
return pImpEditEngine->CreateTextObject( aSel );
}
std::unique_ptr<EditTextObject> EditEngine::GetEmptyTextObject() const
{
return pImpEditEngine->GetEmptyTextObject();
}
void EditEngine::SetText( const EditTextObject& rTextObject )
{
pImpEditEngine->SetText( rTextObject );
pImpEditEngine->FormatAndUpdate();
}
void EditEngine::ShowParagraph( sal_Int32 nParagraph, bool bShow )
{
pImpEditEngine->ShowParagraph( nParagraph, bShow );
}
void EditEngine::SetNotifyHdl( const Link<EENotify&,void>& rLink )
{
pImpEditEngine->SetNotifyHdl( rLink );
}
Link<EENotify&,void> const & EditEngine::GetNotifyHdl() const
{
return pImpEditEngine->GetNotifyHdl();
}
void EditEngine::SetStatusEventHdl( const Link<EditStatus&, void>& rLink )
{
pImpEditEngine->SetStatusEventHdl( rLink );
}
Link<EditStatus&, void> const & EditEngine::GetStatusEventHdl() const
{
return pImpEditEngine->GetStatusEventHdl();
}
void EditEngine::SetHtmlImportHdl( const Link<HtmlImportInfo&,void>& rLink )
{
pImpEditEngine->aHtmlImportHdl = rLink;
}
const Link<HtmlImportInfo&,void>& EditEngine::GetHtmlImportHdl() const
{
return pImpEditEngine->aHtmlImportHdl;
}
void EditEngine::SetRtfImportHdl( const Link<RtfImportInfo&,void>& rLink )
{
pImpEditEngine->aRtfImportHdl = rLink;
}
const Link<RtfImportInfo&,void>& EditEngine::GetRtfImportHdl() const
{
return pImpEditEngine->aRtfImportHdl;
}
void EditEngine::SetBeginMovingParagraphsHdl( const Link<MoveParagraphsInfo&,void>& rLink )
{
pImpEditEngine->aBeginMovingParagraphsHdl = rLink;
}
void EditEngine::SetEndMovingParagraphsHdl( const Link<MoveParagraphsInfo&,void>& rLink )
{
pImpEditEngine->aEndMovingParagraphsHdl = rLink;
}
void EditEngine::SetBeginPasteOrDropHdl( const Link<PasteOrDropInfos&,void>& rLink )
{
pImpEditEngine->aBeginPasteOrDropHdl = rLink;
}
void EditEngine::SetEndPasteOrDropHdl( const Link<PasteOrDropInfos&,void>& rLink )
{
pImpEditEngine->aEndPasteOrDropHdl = rLink;
}
std::unique_ptr<EditTextObject> EditEngine::CreateTextObject( sal_Int32 nPara, sal_Int32 nParas )
{
DBG_ASSERT( 0 <= nPara && nPara < pImpEditEngine->GetEditDoc().Count(), "CreateTextObject: Startpara out of Range" );
DBG_ASSERT( nParas <= pImpEditEngine->GetEditDoc().Count() - nPara, "CreateTextObject: Endpara out of Range" );
ContentNode* pStartNode = pImpEditEngine->GetEditDoc().GetObject( nPara );
ContentNode* pEndNode = pImpEditEngine->GetEditDoc().GetObject( nPara+nParas-1 );
DBG_ASSERT( pStartNode, "Start-Paragraph does not exist: CreateTextObject" );
DBG_ASSERT( pEndNode, "End-Paragraph does not exist: CreateTextObject" );
if ( pStartNode && pEndNode )
{
EditSelection aTmpSel;
aTmpSel.Min() = EditPaM( pStartNode, 0 );
aTmpSel.Max() = EditPaM( pEndNode, pEndNode->Len() );
return pImpEditEngine->CreateTextObject( aTmpSel );
}
return nullptr;
}
void EditEngine::RemoveParagraph( sal_Int32 nPara )
{
DBG_ASSERT( pImpEditEngine->GetEditDoc().Count() > 1, "The first paragraph should not be deleted!" );
if( pImpEditEngine->GetEditDoc().Count() <= 1 )
return;
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( nPara );
const ParaPortion* pPortion = pImpEditEngine->GetParaPortions().SafeGetObject( nPara );
DBG_ASSERT( pPortion && pNode, "Paragraph not found: RemoveParagraph" );
if ( pNode && pPortion )
{
// No Undo encapsulation needed.
pImpEditEngine->ImpRemoveParagraph( nPara );
pImpEditEngine->InvalidateFromParagraph( nPara );
pImpEditEngine->UpdateSelections();
pImpEditEngine->FormatAndUpdate();
}
}
sal_Int32 EditEngine::GetTextLen( sal_Int32 nPara ) const
{
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( nPara );
DBG_ASSERT( pNode, "Paragraph not found: GetTextLen" );
if ( pNode )
return pNode->Len();
return 0;
}
OUString EditEngine::GetText( sal_Int32 nPara ) const
{
OUString aStr;
if ( 0 <= nPara && nPara < pImpEditEngine->GetEditDoc().Count() )
aStr = pImpEditEngine->GetEditDoc().GetParaAsString( nPara );
return aStr;
}
void EditEngine::SetModifyHdl( const Link<LinkParamNone*,void>& rLink )
{
pImpEditEngine->SetModifyHdl( rLink );
}
Link<LinkParamNone*,void> const & EditEngine::GetModifyHdl() const
{
return pImpEditEngine->GetModifyHdl();
}
void EditEngine::ClearModifyFlag()
{
pImpEditEngine->SetModifyFlag( false );
}
void EditEngine::SetModified()
{
pImpEditEngine->SetModifyFlag( true );
}
bool EditEngine::IsModified() const
{
return pImpEditEngine->IsModified();
}
bool EditEngine::IsInSelectionMode() const
{
return ( pImpEditEngine->IsInSelectionMode() ||
pImpEditEngine->GetSelEngine().IsInSelection() );
}
void EditEngine::InsertParagraph( sal_Int32 nPara, const EditTextObject& rTxtObj )
{
if ( nPara > GetParagraphCount() )
{
SAL_WARN_IF( nPara != EE_PARA_APPEND, "editeng", "Paragraph number too large, but not EE_PARA_APPEND!" );
nPara = GetParagraphCount();
}
pImpEditEngine->UndoActionStart( EDITUNDO_INSERT );
// No Undo compounding needed.
EditPaM aPaM( pImpEditEngine->InsertParagraph( nPara ) );
// When InsertParagraph from the outside, no hard attributes
// should be taken over!
pImpEditEngine->RemoveCharAttribs( nPara );
pImpEditEngine->InsertText( rTxtObj, EditSelection( aPaM, aPaM ) );
pImpEditEngine->UndoActionEnd();
pImpEditEngine->FormatAndUpdate();
}
void EditEngine::InsertParagraph(sal_Int32 nPara, const OUString& rTxt)
{
if ( nPara > GetParagraphCount() )
{
SAL_WARN_IF( nPara != EE_PARA_APPEND, "editeng", "Paragraph number too large, but not EE_PARA_APPEND!" );
nPara = GetParagraphCount();
}
pImpEditEngine->UndoActionStart( EDITUNDO_INSERT );
EditPaM aPaM( pImpEditEngine->InsertParagraph( nPara ) );
// When InsertParagraph from the outside, no hard attributes
// should be taken over!
pImpEditEngine->RemoveCharAttribs( nPara );
pImpEditEngine->UndoActionEnd();
pImpEditEngine->ImpInsertText( EditSelection( aPaM, aPaM ), rTxt );
pImpEditEngine->FormatAndUpdate();
}
void EditEngine::SetText(sal_Int32 nPara, const OUString& rTxt)
{
EditSelection* pSel = pImpEditEngine->SelectParagraph( nPara );
if ( pSel )
{
pImpEditEngine->UndoActionStart( EDITUNDO_INSERT );
pImpEditEngine->ImpInsertText( *pSel, rTxt );
pImpEditEngine->UndoActionEnd();
pImpEditEngine->FormatAndUpdate();
delete pSel;
}
}
void EditEngine::SetParaAttribs( sal_Int32 nPara, const SfxItemSet& rSet )
{
pImpEditEngine->SetParaAttribs( nPara, rSet );
pImpEditEngine->FormatAndUpdate();
}
const SfxItemSet& EditEngine::GetParaAttribs( sal_Int32 nPara ) const
{
return pImpEditEngine->GetParaAttribs( nPara );
}
bool EditEngine::HasParaAttrib( sal_Int32 nPara, sal_uInt16 nWhich ) const
{
return pImpEditEngine->HasParaAttrib( nPara, nWhich );
}
const SfxPoolItem& EditEngine::GetParaAttrib( sal_Int32 nPara, sal_uInt16 nWhich )
{
return pImpEditEngine->GetParaAttrib( nPara, nWhich );
}
void EditEngine::SetCharAttribs(sal_Int32 nPara, const SfxItemSet& rSet)
{
EditSelection aSel(pImpEditEngine->ConvertSelection(nPara, 0, nPara, GetTextLen(nPara)));
pImpEditEngine->SetAttribs(aSel, rSet);
pImpEditEngine->FormatAndUpdate();
}
void EditEngine::GetCharAttribs( sal_Int32 nPara, std::vector<EECharAttrib>& rLst ) const
{
pImpEditEngine->GetCharAttribs( nPara, rLst );
}
SfxItemSet EditEngine::GetAttribs( const ESelection& rSel, EditEngineAttribs nOnlyHardAttrib )
{
EditSelection aSel( pImpEditEngine->
ConvertSelection( rSel.nStartPara, rSel.nStartPos, rSel.nEndPara, rSel.nEndPos ) );
return pImpEditEngine->GetAttribs( aSel, nOnlyHardAttrib );
}
SfxItemSet EditEngine::GetAttribs( sal_Int32 nPara, sal_Int32 nStart, sal_Int32 nEnd, GetAttribsFlags nFlags ) const
{
return pImpEditEngine->GetAttribs( nPara, nStart, nEnd, nFlags );
}
void EditEngine::RemoveAttribs( const ESelection& rSelection, bool bRemoveParaAttribs, sal_uInt16 nWhich )
{
pImpEditEngine->UndoActionStart( EDITUNDO_RESETATTRIBS );
EditSelection aSel( pImpEditEngine->ConvertSelection( rSelection.nStartPara, rSelection.nStartPos, rSelection.nEndPara, rSelection.nEndPos ) );
pImpEditEngine->RemoveCharAttribs( aSel, bRemoveParaAttribs, nWhich );
pImpEditEngine->UndoActionEnd();
pImpEditEngine->FormatAndUpdate();
}
vcl::Font EditEngine::GetStandardFont( sal_Int32 nPara )
{
return GetStandardSvxFont( nPara );
}
SvxFont EditEngine::GetStandardSvxFont( sal_Int32 nPara )
{
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( nPara );
return pNode->GetCharAttribs().GetDefFont();
}
void EditEngine::StripPortions()
{
ScopedVclPtrInstance< VirtualDevice > aTmpDev;
tools::Rectangle aBigRect( Point( 0, 0 ), Size( 0x7FFFFFFF, 0x7FFFFFFF ) );
if ( IsVertical() )
{
if( IsTopToBottom() )
{
aBigRect.SetRight( 0 );
aBigRect.SetLeft( -0x7FFFFFFF );
}
else
{
aBigRect.SetTop( -0x7FFFFFFF );
aBigRect.SetBottom( 0 );
}
}
pImpEditEngine->Paint( aTmpDev.get(), aBigRect, Point(), true );
}
void EditEngine::GetPortions( sal_Int32 nPara, std::vector<sal_Int32>& rList )
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatFullDoc();
const ParaPortion* pParaPortion = pImpEditEngine->GetParaPortions().SafeGetObject( nPara );
if ( pParaPortion )
{
sal_Int32 nEnd = 0;
sal_Int32 nTextPortions = pParaPortion->GetTextPortions().Count();
for ( sal_Int32 n = 0; n < nTextPortions; n++ )
{
nEnd = nEnd + pParaPortion->GetTextPortions()[n].GetLen();
rList.push_back( nEnd );
}
}
}
void EditEngine::SetFlatMode( bool bFlat)
{
pImpEditEngine->SetFlatMode( bFlat );
}
bool EditEngine::IsFlatMode() const
{
return !( pImpEditEngine->aStatus.UseCharAttribs() );
}
void EditEngine::SetControlWord( EEControlBits nWord )
{
if ( nWord != pImpEditEngine->aStatus.GetControlWord() )
{
EEControlBits nPrev = pImpEditEngine->aStatus.GetControlWord();
pImpEditEngine->aStatus.GetControlWord() = nWord;
EEControlBits nChanges = nPrev ^ nWord;
if ( pImpEditEngine->IsFormatted() )
{
// possibly reformat:
if ( ( nChanges & EEControlBits::USECHARATTRIBS ) ||
( nChanges & EEControlBits::USEPARAATTRIBS ) ||
( nChanges & EEControlBits::ONECHARPERLINE ) ||
( nChanges & EEControlBits::STRETCHING ) ||
( nChanges & EEControlBits::OUTLINER ) ||
( nChanges & EEControlBits::NOCOLORS ) ||
( nChanges & EEControlBits::OUTLINER2 ) )
{
if ( ( nChanges & EEControlBits::USECHARATTRIBS ) ||
( nChanges & EEControlBits::USEPARAATTRIBS ) )
{
bool bUseCharAttribs = bool( nWord & EEControlBits::USECHARATTRIBS );
pImpEditEngine->GetEditDoc().CreateDefFont( bUseCharAttribs );
}
pImpEditEngine->FormatFullDoc();
pImpEditEngine->UpdateViews( pImpEditEngine->GetActiveView() );
}
}
bool bSpellingChanged = bool(nChanges & EEControlBits::ONLINESPELLING);
if ( bSpellingChanged )
{
pImpEditEngine->StopOnlineSpellTimer();
if (nWord & EEControlBits::ONLINESPELLING)
{
// Create WrongList, start timer...
sal_Int32 nNodes = pImpEditEngine->GetEditDoc().Count();
for ( sal_Int32 n = 0; n < nNodes; n++ )
{
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( n );
pNode->CreateWrongList();
}
if (pImpEditEngine->IsFormatted())
pImpEditEngine->StartOnlineSpellTimer();
}
else
{
long nY = 0;
sal_Int32 nNodes = pImpEditEngine->GetEditDoc().Count();
for ( sal_Int32 n = 0; n < nNodes; n++ )
{
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( n );
const ParaPortion* pPortion = pImpEditEngine->GetParaPortions()[n];
bool bWrongs = false;
if (pNode->GetWrongList() != nullptr)
bWrongs = !pNode->GetWrongList()->empty();
pNode->DestroyWrongList();
if ( bWrongs )
{
pImpEditEngine->aInvalidRect.SetLeft( 0 );
pImpEditEngine->aInvalidRect.SetRight( pImpEditEngine->GetPaperSize().Width() );
pImpEditEngine->aInvalidRect.SetTop( nY+1 );
pImpEditEngine->aInvalidRect.SetBottom( nY+pPortion->GetHeight()-1 );
pImpEditEngine->UpdateViews( pImpEditEngine->pActiveView );
}
nY += pPortion->GetHeight();
}
}
}
}
}
EEControlBits EditEngine::GetControlWord() const
{
return pImpEditEngine->aStatus.GetControlWord();
}
long EditEngine::GetFirstLineStartX( sal_Int32 nParagraph )
{
long nX = 0;
const ParaPortion* pPPortion = pImpEditEngine->GetParaPortions().SafeGetObject( nParagraph );
if ( pPPortion )
{
DBG_ASSERT( pImpEditEngine->IsFormatted() || !pImpEditEngine->IsFormatting(), "GetFirstLineStartX: Doc not formatted - unable to format!" );
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
const EditLine& rFirstLine = pPPortion->GetLines()[0];
nX = rFirstLine.GetStartPosX();
}
return nX;
}
Point EditEngine::GetDocPos( const Point& rPaperPos ) const
{
Point aDocPos( rPaperPos );
if ( IsVertical() )
{
if ( IsTopToBottom() )
{
aDocPos.setX( rPaperPos.Y() );
aDocPos.setY( GetPaperSize().Width() - rPaperPos.X() );
}
else
{
aDocPos.setX( rPaperPos.Y() );
aDocPos.setY( rPaperPos.X() );
}
}
return aDocPos;
}
Point EditEngine::GetDocPosTopLeft( sal_Int32 nParagraph )
{
const ParaPortion* pPPortion = pImpEditEngine->GetParaPortions().SafeGetObject( nParagraph );
DBG_ASSERT( pPPortion, "Paragraph not found: GetWindowPosTopLeft" );
Point aPoint;
if ( pPPortion )
{
// If someone calls GetLineHeight() with an empty Engine.
DBG_ASSERT( pImpEditEngine->IsFormatted() || !pImpEditEngine->IsFormatting(), "GetDocPosTopLeft: Doc not formatted - unable to format!" );
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatAndUpdate();
if ( pPPortion->GetLines().Count() )
{
// Correct it if large Bullet.
const EditLine& rFirstLine = pPPortion->GetLines()[0];
aPoint.setX( rFirstLine.GetStartPosX() );
}
else
{
const SvxLRSpaceItem& rLRItem = pImpEditEngine->GetLRSpaceItem( pPPortion->GetNode() );
// TL_NF_LR aPoint.X() = pImpEditEngine->GetXValue( (short)(rLRItem.GetTextLeft() + rLRItem.GetTextFirstLineOfst()) );
sal_Int32 nSpaceBefore = 0;
pImpEditEngine->GetSpaceBeforeAndMinLabelWidth( pPPortion->GetNode(), &nSpaceBefore );
short nX = static_cast<short>(rLRItem.GetTextLeft()
+ rLRItem.GetTextFirstLineOfst()
+ nSpaceBefore);
aPoint.setX( pImpEditEngine->GetXValue( nX
) );
}
aPoint.setY( pImpEditEngine->GetParaPortions().GetYOffset( pPPortion ) );
}
return aPoint;
}
const SvxNumberFormat* EditEngine::GetNumberFormat( sal_Int32 ) const
{
// derived objects may override this function to give access to
// bullet information (see Outliner)
return nullptr;
}
bool EditEngine::IsRightToLeft( sal_Int32 nPara ) const
{
return pImpEditEngine->IsRightToLeft( nPara );
}
bool EditEngine::IsTextPos( const Point& rPaperPos, sal_uInt16 nBorder )
{
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
bool bTextPos = false;
// take unrotated positions for calculation here
Point aDocPos = GetDocPos( rPaperPos );
if ( ( aDocPos.Y() > 0 ) && ( aDocPos.Y() < static_cast<long>(pImpEditEngine->GetTextHeight()) ) )
{
EditPaM aPaM = pImpEditEngine->GetPaM( aDocPos, false );
if ( aPaM.GetNode() )
{
const ParaPortion* pParaPortion = pImpEditEngine->FindParaPortion( aPaM.GetNode() );
DBG_ASSERT( pParaPortion, "ParaPortion?" );
sal_Int32 nLine = pParaPortion->GetLineNumber( aPaM.GetIndex() );
const EditLine& rLine = pParaPortion->GetLines()[nLine];
Range aLineXPosStartEnd = pImpEditEngine->GetLineXPosStartEnd( pParaPortion, &rLine );
if ( ( aDocPos.X() >= aLineXPosStartEnd.Min() - nBorder ) &&
( aDocPos.X() <= aLineXPosStartEnd.Max() + nBorder ) )
{
bTextPos = true;
}
}
}
return bTextPos;
}
void EditEngine::SetEditTextObjectPool( SfxItemPool* pPool )
{
pImpEditEngine->SetEditTextObjectPool( pPool );
}
SfxItemPool* EditEngine::GetEditTextObjectPool() const
{
return pImpEditEngine->GetEditTextObjectPool();
}
void EditEngine::QuickSetAttribs( const SfxItemSet& rSet, const ESelection& rSel )
{
EditSelection aSel( pImpEditEngine->
ConvertSelection( rSel.nStartPara, rSel.nStartPos, rSel.nEndPara, rSel.nEndPos ) );
pImpEditEngine->SetAttribs( aSel, rSet );
}
void EditEngine::QuickMarkInvalid( const ESelection& rSel )
{
DBG_ASSERT( rSel.nStartPara < pImpEditEngine->GetEditDoc().Count(), "MarkInvalid: Start out of Range!" );
DBG_ASSERT( rSel.nEndPara < pImpEditEngine->GetEditDoc().Count(), "MarkInvalid: End out of Range!" );
for ( sal_Int32 nPara = rSel.nStartPara; nPara <= rSel.nEndPara; nPara++ )
{
ParaPortion* pPortion = pImpEditEngine->GetParaPortions().SafeGetObject( nPara );
if ( pPortion )
pPortion->MarkSelectionInvalid( 0 );
}
}
void EditEngine::QuickInsertText(const OUString& rText, const ESelection& rSel)
{
EditSelection aSel( pImpEditEngine->
ConvertSelection( rSel.nStartPara, rSel.nStartPos, rSel.nEndPara, rSel.nEndPos ) );
pImpEditEngine->ImpInsertText( aSel, rText );
}
void EditEngine::QuickDelete( const ESelection& rSel )
{
EditSelection aSel( pImpEditEngine->
ConvertSelection( rSel.nStartPara, rSel.nStartPos, rSel.nEndPara, rSel.nEndPos ) );
pImpEditEngine->ImpDeleteSelection( aSel );
}
void EditEngine::QuickMarkToBeRepainted( sal_Int32 nPara )
{
ParaPortion* pPortion = pImpEditEngine->GetParaPortions().SafeGetObject( nPara );
if ( pPortion )
pPortion->SetMustRepaint( true );
}
void EditEngine::QuickInsertLineBreak( const ESelection& rSel )
{
EditSelection aSel( pImpEditEngine->
ConvertSelection( rSel.nStartPara, rSel.nStartPos, rSel.nEndPara, rSel.nEndPos ) );
pImpEditEngine->InsertLineBreak( aSel );
}
void EditEngine::QuickInsertField( const SvxFieldItem& rFld, const ESelection& rSel )
{
EditSelection aSel( pImpEditEngine->
ConvertSelection( rSel.nStartPara, rSel.nStartPos, rSel.nEndPara, rSel.nEndPos ) );
pImpEditEngine->ImpInsertFeature( aSel, rFld );
}
void EditEngine::QuickFormatDoc( bool bFull )
{
if ( bFull )
pImpEditEngine->FormatFullDoc();
else
pImpEditEngine->FormatDoc();
// Don't pass active view, maybe selection is not updated yet...
pImpEditEngine->UpdateViews();
}
void EditEngine::SetStyleSheet(const EditSelection& aSel, SfxStyleSheet* pStyle)
{
pImpEditEngine->SetStyleSheet(aSel, pStyle);
}
void EditEngine::SetStyleSheet( sal_Int32 nPara, SfxStyleSheet* pStyle )
{
pImpEditEngine->SetStyleSheet( nPara, pStyle );
}
const SfxStyleSheet* EditEngine::GetStyleSheet( sal_Int32 nPara ) const
{
return pImpEditEngine->GetStyleSheet( nPara );
}
SfxStyleSheet* EditEngine::GetStyleSheet( sal_Int32 nPara )
{
return pImpEditEngine->GetStyleSheet( nPara );
}
void EditEngine::SetStyleSheetPool( SfxStyleSheetPool* pSPool )
{
pImpEditEngine->SetStyleSheetPool( pSPool );
}
SfxStyleSheetPool* EditEngine::GetStyleSheetPool()
{
return pImpEditEngine->GetStyleSheetPool();
}
void EditEngine::SetWordDelimiters( const OUString& rDelimiters )
{
pImpEditEngine->aWordDelimiters = rDelimiters;
if (pImpEditEngine->aWordDelimiters.indexOf(CH_FEATURE) == -1)
pImpEditEngine->aWordDelimiters += OUStringLiteral1(CH_FEATURE);
}
const OUString& EditEngine::GetWordDelimiters() const
{
return pImpEditEngine->aWordDelimiters;
}
void EditEngine::EraseVirtualDevice()
{
pImpEditEngine->EraseVirtualDevice();
}
void EditEngine::SetSpeller( Reference< XSpellChecker1 > const &xSpeller )
{
pImpEditEngine->SetSpeller( xSpeller );
}
Reference< XSpellChecker1 > const & EditEngine::GetSpeller()
{
return pImpEditEngine->GetSpeller();
}
void EditEngine::SetHyphenator( Reference< XHyphenator > const & xHyph )
{
pImpEditEngine->SetHyphenator( xHyph );
}
void EditEngine::GetAllMisspellRanges( std::vector<editeng::MisspellRanges>& rRanges ) const
{
pImpEditEngine->GetAllMisspellRanges(rRanges);
}
void EditEngine::SetAllMisspellRanges( const std::vector<editeng::MisspellRanges>& rRanges )
{
pImpEditEngine->SetAllMisspellRanges(rRanges);
}
void EditEngine::SetForbiddenCharsTable(const std::shared_ptr<SvxForbiddenCharactersTable>& xForbiddenChars)
{
ImpEditEngine::SetForbiddenCharsTable( xForbiddenChars );
}
void EditEngine::SetDefaultLanguage( LanguageType eLang )
{
pImpEditEngine->SetDefaultLanguage( eLang );
}
LanguageType EditEngine::GetDefaultLanguage() const
{
return pImpEditEngine->GetDefaultLanguage();
}
bool EditEngine::SpellNextDocument()
{
return false;
}
EESpellState EditEngine::HasSpellErrors()
{
if ( !pImpEditEngine->GetSpeller().is() )
return EESpellState::NoSpeller;
return pImpEditEngine->HasSpellErrors();
}
void EditEngine::ClearSpellErrors()
{
pImpEditEngine->ClearSpellErrors();
}
bool EditEngine::SpellSentence(EditView const & rView, svx::SpellPortions& rToFill )
{
return pImpEditEngine->SpellSentence( rView, rToFill );
}
void EditEngine::PutSpellingToSentenceStart( EditView const & rEditView )
{
pImpEditEngine->PutSpellingToSentenceStart( rEditView );
}
void EditEngine::ApplyChangedSentence(EditView const & rEditView, const svx::SpellPortions& rNewPortions, bool bRecheck )
{
pImpEditEngine->ApplyChangedSentence( rEditView, rNewPortions, bRecheck );
}
bool EditEngine::HasConvertibleTextPortion( LanguageType nLang )
{
return pImpEditEngine->HasConvertibleTextPortion( nLang );
}
bool EditEngine::ConvertNextDocument()
{
return false;
}
bool EditEngine::HasText( const SvxSearchItem& rSearchItem )
{
return pImpEditEngine->HasText( rSearchItem );
}
void EditEngine::SetGlobalCharStretching( sal_uInt16 nX, sal_uInt16 nY )
{
pImpEditEngine->SetCharStretching( nX, nY );
}
void EditEngine::GetGlobalCharStretching( sal_uInt16& rX, sal_uInt16& rY ) const
{
pImpEditEngine->GetCharStretching( rX, rY );
}
bool EditEngine::ShouldCreateBigTextObject() const
{
sal_Int32 nTextPortions = 0;
sal_Int32 nParas = pImpEditEngine->GetEditDoc().Count();
for ( sal_Int32 nPara = 0; nPara < nParas; nPara++ )
{
ParaPortion* pParaPortion = pImpEditEngine->GetParaPortions()[nPara];
nTextPortions = nTextPortions + pParaPortion->GetTextPortions().Count();
}
return nTextPortions >= pImpEditEngine->GetBigTextObjectStart();
}
sal_uInt16 EditEngine::GetFieldCount( sal_Int32 nPara ) const
{
sal_uInt16 nFields = 0;
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( nPara );
if ( pNode )
{
for (auto const& attrib : pNode->GetCharAttribs().GetAttribs())
{
if (attrib->Which() == EE_FEATURE_FIELD)
++nFields;
}
}
return nFields;
}
EFieldInfo EditEngine::GetFieldInfo( sal_Int32 nPara, sal_uInt16 nField ) const
{
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( nPara );
if ( pNode )
{
sal_uInt16 nCurrentField = 0;
for (auto const& attrib : pNode->GetCharAttribs().GetAttribs())
{
const EditCharAttrib& rAttr = *attrib.get();
if (rAttr.Which() == EE_FEATURE_FIELD)
{
if ( nCurrentField == nField )
{
const SvxFieldItem* p = static_cast<const SvxFieldItem*>(rAttr.GetItem());
EFieldInfo aInfo(*p, nPara, rAttr.GetStart());
aInfo.aCurrentText = static_cast<const EditCharAttribField&>(rAttr).GetFieldValue();
return aInfo;
}
++nCurrentField;
}
}
}
return EFieldInfo();
}
bool EditEngine::UpdateFields()
{
bool bChanges = pImpEditEngine->UpdateFields();
if ( bChanges )
pImpEditEngine->FormatAndUpdate();
return bChanges;
}
bool EditEngine::UpdateFieldsOnly()
{
return pImpEditEngine->UpdateFields();
}
void EditEngine::RemoveFields( const std::function<bool ( const SvxFieldData* )>& isFieldData )
{
pImpEditEngine->UpdateFields();
sal_Int32 nParas = pImpEditEngine->GetEditDoc().Count();
for ( sal_Int32 nPara = 0; nPara < nParas; nPara++ )
{
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( nPara );
const CharAttribList::AttribsType& rAttrs = pNode->GetCharAttribs().GetAttribs();
for (size_t nAttr = rAttrs.size(); nAttr; )
{
const EditCharAttrib& rAttr = *rAttrs[--nAttr].get();
if (rAttr.Which() == EE_FEATURE_FIELD)
{
const SvxFieldData* pFldData = static_cast<const SvxFieldItem*>(rAttr.GetItem())->GetField();
if ( pFldData && ( isFieldData( pFldData ) ) )
{
DBG_ASSERT( dynamic_cast<const SvxFieldItem*>(rAttr.GetItem()), "no field item..." );
EditSelection aSel( EditPaM(pNode, rAttr.GetStart()), EditPaM(pNode, rAttr.GetEnd()) );
OUString aFieldText = static_cast<const EditCharAttribField&>(rAttr).GetFieldValue();
pImpEditEngine->ImpInsertText( aSel, aFieldText );
}
}
}
}
}
bool EditEngine::HasOnlineSpellErrors() const
{
sal_Int32 nNodes = pImpEditEngine->GetEditDoc().Count();
for ( sal_Int32 n = 0; n < nNodes; n++ )
{
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( n );
if ( pNode->GetWrongList() && !pNode->GetWrongList()->empty() )
return true;
}
return false;
}
void EditEngine::CompleteOnlineSpelling()
{
if ( pImpEditEngine->GetStatus().DoOnlineSpelling() )
{
if( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatAndUpdate();
pImpEditEngine->StopOnlineSpellTimer();
pImpEditEngine->DoOnlineSpelling( nullptr, true, false );
}
}
sal_Int32 EditEngine::FindParagraph( long nDocPosY )
{
return pImpEditEngine->GetParaPortions().FindParagraph( nDocPosY );
}
EPosition EditEngine::FindDocPosition( const Point& rDocPos ) const
{
EPosition aPos;
// From the point of the API, this is const....
EditPaM aPaM = const_cast<EditEngine*>(this)->pImpEditEngine->GetPaM( rDocPos, false );
if ( aPaM.GetNode() )
{
aPos.nPara = pImpEditEngine->aEditDoc.GetPos( aPaM.GetNode() );
aPos.nIndex = aPaM.GetIndex();
}
return aPos;
}
tools::Rectangle EditEngine::GetCharacterBounds( const EPosition& rPos ) const
{
tools::Rectangle aBounds;
ContentNode* pNode = pImpEditEngine->GetEditDoc().GetObject( rPos.nPara );
// Check against index, not paragraph
if ( pNode && ( rPos.nIndex < pNode->Len() ) )
{
aBounds = pImpEditEngine->PaMtoEditCursor( EditPaM( pNode, rPos.nIndex ), GetCursorFlags::TextOnly );
tools::Rectangle aR2 = pImpEditEngine->PaMtoEditCursor( EditPaM( pNode, rPos.nIndex+1 ), GetCursorFlags::TextOnly|GetCursorFlags::EndOfLine );
if ( aR2.Right() > aBounds.Right() )
aBounds.SetRight( aR2.Right() );
}
return aBounds;
}
ParagraphInfos EditEngine::GetParagraphInfos( sal_Int32 nPara )
{
// This only works if not already in the format ...
if ( !pImpEditEngine->IsFormatted() )
pImpEditEngine->FormatDoc();
ParagraphInfos aInfos;
aInfos.bValid = pImpEditEngine->IsFormatted();
if ( pImpEditEngine->IsFormatted() )
{
const ParaPortion* pParaPortion = pImpEditEngine->GetParaPortions()[nPara];
const EditLine* pLine = (pParaPortion && pParaPortion->GetLines().Count()) ?
&pParaPortion->GetLines()[0] : nullptr;
DBG_ASSERT( pParaPortion && pLine, "GetParagraphInfos - Paragraph out of range" );
if ( pParaPortion && pLine )
{
aInfos.nFirstLineHeight = pLine->GetHeight();
aInfos.nFirstLineTextHeight = pLine->GetTxtHeight();
aInfos.nFirstLineMaxAscent = pLine->GetMaxAscent();
}
}
return aInfos;
}
css::uno::Reference< css::datatransfer::XTransferable >
EditEngine::CreateTransferable( const ESelection& rSelection ) const
{
EditSelection aSel( pImpEditEngine->CreateSel( rSelection ) );
return pImpEditEngine->CreateTransferable( aSel );
}
// ====================== Virtual Methods ========================
void EditEngine::DrawingText( const Point&, const OUString&, sal_Int32, sal_Int32,
const long*, const SvxFont&, sal_Int32 /*nPara*/, sal_uInt8 /*nRightToLeft*/,
const EEngineData::WrongSpellVector*, const SvxFieldData*, bool, bool,
const css::lang::Locale*, const Color&, const Color&)
{
}
void EditEngine::DrawingTab( const Point& /*rStartPos*/, long /*nWidth*/,
const OUString& /*rChar*/, const SvxFont& /*rFont*/,
sal_Int32 /*nPara*/, sal_uInt8 /*nRightToLeft*/, bool /*bEndOfLine*/,
bool /*bEndOfParagraph*/, const Color& /*rOverlineColor*/,
const Color& /*rTextLineColor*/)
{
}
void EditEngine::PaintingFirstLine( sal_Int32, const Point&, long, const Point&, short, OutputDevice* )
{
}
void EditEngine::ParagraphInserted( sal_Int32 nPara )
{
if ( GetNotifyHdl().IsSet() )
{
EENotify aNotify( EE_NOTIFY_PARAGRAPHINSERTED );
aNotify.nParagraph = nPara;
pImpEditEngine->QueueNotify( aNotify );
}
}
void EditEngine::ParagraphDeleted( sal_Int32 nPara )
{
if ( GetNotifyHdl().IsSet() )
{
EENotify aNotify( EE_NOTIFY_PARAGRAPHREMOVED );
aNotify.nParagraph = nPara;
pImpEditEngine->QueueNotify( aNotify );
}
}
void EditEngine::ParagraphConnected( sal_Int32 /*nLeftParagraph*/, sal_Int32 /*nRightParagraph*/ )
{
}
void EditEngine::ParaAttribsChanged( sal_Int32 /* nParagraph */ )
{
}
void EditEngine::StyleSheetChanged( SfxStyleSheet* /* pStyle */ )
{
}
void EditEngine::ParagraphHeightChanged( sal_Int32 nPara )
{
if ( GetNotifyHdl().IsSet() )
{
EENotify aNotify( EE_NOTIFY_TextHeightChanged );
aNotify.nParagraph = nPara;
pImpEditEngine->QueueNotify( aNotify );
}
}
OUString EditEngine::GetUndoComment( sal_uInt16 nId ) const
{
OUString aComment;
switch ( nId )
{
case EDITUNDO_REMOVECHARS:
case EDITUNDO_CONNECTPARAS:
case EDITUNDO_DELCONTENT:
case EDITUNDO_DELETE:
case EDITUNDO_CUT:
aComment = EditResId(RID_EDITUNDO_DEL);
break;
case EDITUNDO_MOVEPARAGRAPHS:
case EDITUNDO_MOVEPARAS:
case EDITUNDO_DRAGANDDROP:
aComment = EditResId(RID_EDITUNDO_MOVE);
break;
case EDITUNDO_INSERTFEATURE:
case EDITUNDO_SPLITPARA:
case EDITUNDO_INSERTCHARS:
case EDITUNDO_PASTE:
case EDITUNDO_INSERT:
case EDITUNDO_READ:
aComment = EditResId(RID_EDITUNDO_INSERT);
break;
case EDITUNDO_REPLACEALL:
aComment = EditResId(RID_EDITUNDO_REPLACE);
break;
case EDITUNDO_ATTRIBS:
case EDITUNDO_PARAATTRIBS:
aComment = EditResId(RID_EDITUNDO_SETATTRIBS);
break;
case EDITUNDO_RESETATTRIBS:
aComment = EditResId(RID_EDITUNDO_RESETATTRIBS);
break;
case EDITUNDO_STYLESHEET:
aComment = EditResId(RID_EDITUNDO_SETSTYLE);
break;
case EDITUNDO_TRANSLITERATE:
aComment = EditResId(RID_EDITUNDO_TRANSLITERATE);
break;
case EDITUNDO_INDENTBLOCK:
case EDITUNDO_UNINDENTBLOCK:
aComment = EditResId(RID_EDITUNDO_INDENT);
break;
}
return aComment;
}
tools::Rectangle EditEngine::GetBulletArea( sal_Int32 )
{
return tools::Rectangle( Point(), Point() );
}
OUString EditEngine::CalcFieldValue( const SvxFieldItem&, sal_Int32, sal_Int32, boost::optional<Color>&, boost::optional<Color>& )
{
return OUString(' ');
}
void EditEngine::FieldClicked( const SvxFieldItem&, sal_Int32, sal_Int32 )
{
}
// ====================== Static Methods =======================
SfxItemPool* EditEngine::CreatePool()
{
SfxItemPool* pPool = new EditEngineItemPool();
return pPool;
}
SfxItemPool& EditEngine::GetGlobalItemPool()
{
if ( !pGlobalPool )
pGlobalPool = CreatePool();
return *pGlobalPool;
}
void EditEngine::SetFontInfoInItemSet( SfxItemSet& rSet, const vcl::Font& rFont )
{
SvxFont aSvxFont( rFont );
SetFontInfoInItemSet( rSet, aSvxFont );
}
void EditEngine::SetFontInfoInItemSet( SfxItemSet& rSet, const SvxFont& rFont )
{
rSet.Put( SvxLanguageItem( rFont.GetLanguage(), EE_CHAR_LANGUAGE ) );
rSet.Put( SvxFontItem( rFont.GetFamilyType(), rFont.GetFamilyName(), OUString(), rFont.GetPitch(), rFont.GetCharSet(), EE_CHAR_FONTINFO ) );
rSet.Put( SvxFontHeightItem( rFont.GetFontSize().Height(), 100, EE_CHAR_FONTHEIGHT ) );
rSet.Put( SvxCharScaleWidthItem( 100, EE_CHAR_FONTWIDTH ) );
rSet.Put( SvxShadowedItem( rFont.IsShadow(), EE_CHAR_SHADOW ) );
rSet.Put( SvxEscapementItem( rFont.GetEscapement(), rFont.GetPropr(), EE_CHAR_ESCAPEMENT ) );
rSet.Put( SvxWeightItem( rFont.GetWeight(), EE_CHAR_WEIGHT ) );
rSet.Put( SvxColorItem( rFont.GetColor(), EE_CHAR_COLOR ) );
rSet.Put( SvxBackgroundColorItem( rFont.GetFillColor(), EE_CHAR_BKGCOLOR ) );
rSet.Put( SvxUnderlineItem( rFont.GetUnderline(), EE_CHAR_UNDERLINE ) );
rSet.Put( SvxOverlineItem( rFont.GetOverline(), EE_CHAR_OVERLINE ) );
rSet.Put( SvxCrossedOutItem( rFont.GetStrikeout(), EE_CHAR_STRIKEOUT ) );
rSet.Put( SvxCaseMapItem( rFont.GetCaseMap(), EE_CHAR_CASEMAP ) );
rSet.Put( SvxPostureItem( rFont.GetItalic(), EE_CHAR_ITALIC ) );
rSet.Put( SvxContourItem( rFont.IsOutline(), EE_CHAR_OUTLINE ) );
rSet.Put( SvxAutoKernItem( rFont.IsKerning(), EE_CHAR_PAIRKERNING ) );
rSet.Put( SvxKerningItem( rFont.GetFixKerning(), EE_CHAR_KERNING ) );
rSet.Put( SvxWordLineModeItem( rFont.IsWordLineMode(), EE_CHAR_WLM ) );
rSet.Put( SvxEmphasisMarkItem( rFont.GetEmphasisMark(), EE_CHAR_EMPHASISMARK ) );
rSet.Put( SvxCharReliefItem( rFont.GetRelief(), EE_CHAR_RELIEF ) );
}
vcl::Font EditEngine::CreateFontFromItemSet( const SfxItemSet& rItemSet, SvtScriptType nScriptType )
{
SvxFont aFont;
CreateFont( aFont, rItemSet, true, nScriptType );
#if HAVE_GCC_BUG_87150
return aFont;
#else
return std::move(aFont);
#endif
}
SvxFont EditEngine::CreateSvxFontFromItemSet( const SfxItemSet& rItemSet )
{
SvxFont aFont;
CreateFont( aFont, rItemSet );
return aFont;
}
bool EditEngine::DoesKeyMoveCursor( const KeyEvent& rKeyEvent )
{
bool bDoesMove = false;
switch ( rKeyEvent.GetKeyCode().GetCode() )
{
case KEY_UP:
case KEY_DOWN:
case KEY_LEFT:
case KEY_RIGHT:
case KEY_HOME:
case KEY_END:
case KEY_PAGEUP:
case KEY_PAGEDOWN:
{
if ( !rKeyEvent.GetKeyCode().IsMod2() )
bDoesMove = true;
}
break;
}
return bDoesMove;
}
bool EditEngine::DoesKeyChangeText( const KeyEvent& rKeyEvent )
{
bool bDoesChange = false;
KeyFuncType eFunc = rKeyEvent.GetKeyCode().GetFunction();
if ( eFunc != KeyFuncType::DONTKNOW )
{
switch ( eFunc )
{
case KeyFuncType::UNDO:
case KeyFuncType::REDO:
case KeyFuncType::CUT:
case KeyFuncType::PASTE: bDoesChange = true;
break;
default: // is then possibly edited below.
eFunc = KeyFuncType::DONTKNOW;
}
}
if ( eFunc == KeyFuncType::DONTKNOW )
{
switch ( rKeyEvent.GetKeyCode().GetCode() )
{
case KEY_DELETE:
case KEY_BACKSPACE: bDoesChange = true;
break;
case KEY_RETURN:
case KEY_TAB:
{
if ( !rKeyEvent.GetKeyCode().IsMod1() && !rKeyEvent.GetKeyCode().IsMod2() )
bDoesChange = true;
}
break;
default:
{
bDoesChange = IsSimpleCharInput( rKeyEvent );
}
}
}
return bDoesChange;
}
bool EditEngine::IsSimpleCharInput( const KeyEvent& rKeyEvent )
{
return EditEngine::IsPrintable( rKeyEvent.GetCharCode() ) &&
( KEY_MOD2 != (rKeyEvent.GetKeyCode().GetModifier() & ~KEY_SHIFT ) ) &&
( KEY_MOD1 != (rKeyEvent.GetKeyCode().GetModifier() & ~KEY_SHIFT ) );
}
bool EditEngine::HasValidData( const css::uno::Reference< css::datatransfer::XTransferable >& rTransferable )
{
bool bValidData = false;
if ( rTransferable.is() )
{
// Every application that copies rtf or any other text format also copies plain text into the clipboard....
datatransfer::DataFlavor aFlavor;
SotExchange::GetFormatDataFlavor( SotClipboardFormatId::STRING, aFlavor );
bValidData = rTransferable->isDataFlavorSupported( aFlavor );
}
return bValidData;
}
/** sets a link that is called at the beginning of a drag operation at an edit view */
void EditEngine::SetBeginDropHdl( const Link<EditView*,void>& rLink )
{
pImpEditEngine->SetBeginDropHdl( rLink );
}
Link<EditView*,void> const & EditEngine::GetBeginDropHdl() const
{
return pImpEditEngine->GetBeginDropHdl();
}
/** sets a link that is called at the end of a drag operation at an edit view */
void EditEngine::SetEndDropHdl( const Link<EditView*,void>& rLink )
{
pImpEditEngine->SetEndDropHdl( rLink );
}
Link<EditView*,void> const & EditEngine::GetEndDropHdl() const
{
return pImpEditEngine->GetEndDropHdl();
}
void EditEngine::SetFirstWordCapitalization( bool bCapitalize )
{
pImpEditEngine->SetFirstWordCapitalization( bCapitalize );
}
void EditEngine::SetReplaceLeadingSingleQuotationMark( bool bReplace )
{
pImpEditEngine->SetReplaceLeadingSingleQuotationMark( bReplace );
}
bool EditEngine::IsHtmlImportHandlerSet() const
{
return pImpEditEngine->aHtmlImportHdl.IsSet();
}
bool EditEngine::IsRtfImportHandlerSet() const
{
return pImpEditEngine->aRtfImportHdl.IsSet();
}
bool EditEngine::IsImportRTFStyleSheetsSet() const
{
return pImpEditEngine->GetStatus().DoImportRTFStyleSheets();
}
void EditEngine::CallHtmlImportHandler(HtmlImportInfo& rInfo)
{
pImpEditEngine->aHtmlImportHdl.Call(rInfo);
}
void EditEngine::CallRtfImportHandler(RtfImportInfo& rInfo)
{
pImpEditEngine->aRtfImportHdl.Call(rInfo);
}
EditPaM EditEngine::InsertParaBreak(const EditSelection& rEditSelection)
{
return pImpEditEngine->ImpInsertParaBreak(rEditSelection);
}
EditPaM EditEngine::InsertLineBreak(const EditSelection& rEditSelection)
{
return pImpEditEngine->InsertLineBreak(rEditSelection);
}
sal_Int32 EditEngine::GetOverflowingParaNum() const {
return pImpEditEngine->GetOverflowingParaNum();
}
sal_Int32 EditEngine::GetOverflowingLineNum() const {
return pImpEditEngine->GetOverflowingLineNum();
}
void EditEngine::ClearOverflowingParaNum() {
pImpEditEngine->ClearOverflowingParaNum();
}
bool EditEngine::IsPageOverflow() {
pImpEditEngine->CheckPageOverflow();
return pImpEditEngine->IsPageOverflow();
}
void EditEngine::SetHoriAlignIgnoreTrailingWhitespace(bool bEnabled)
{
pImpEditEngine->SetHoriAlignIgnoreTrailingWhitespace(bEnabled);
}
EFieldInfo::EFieldInfo()
{
}
EFieldInfo::EFieldInfo( const SvxFieldItem& rFieldItem, sal_Int32 nPara, sal_Int32 nPos ) :
pFieldItem( new SvxFieldItem( rFieldItem ) ),
aPosition( nPara, nPos )
{
}
EFieldInfo::~EFieldInfo()
{
}
EFieldInfo::EFieldInfo( const EFieldInfo& rFldInfo )
{
*this = rFldInfo;
}
EFieldInfo& EFieldInfo::operator= ( const EFieldInfo& rFldInfo )
{
if( this == &rFldInfo )
return *this;
pFieldItem.reset( rFldInfo.pFieldItem ? new SvxFieldItem( *rFldInfo.pFieldItem ) : nullptr );
aCurrentText = rFldInfo.aCurrentText;
aPosition = rFldInfo.aPosition;
return *this;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V547 Expression 'eFunc == KeyFuncType::DONTKNOW' is always true.