/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <com/sun/star/uno/Reference.hxx>
#include <com/sun/star/chart/XChartDocument.hpp>
#include <com/sun/star/chart2/XChartDocument.hpp>
#include <com/sun/star/embed/XEmbeddedObject.hpp>
#include <com/sun/star/embed/XClassifiedObject.hpp>
#include <basegfx/matrix/b2dhommatrixtools.hxx>
#include <scitems.hxx>
#include <editeng/eeitem.hxx>
#include <editeng/frmdiritem.hxx>
#include <sot/exchange.hxx>
#include <svx/objfac3d.hxx>
#include <svx/xtable.hxx>
#include <svx/svdoutl.hxx>
#include <svx/svditer.hxx>
#include <svx/svdlayer.hxx>
#include <svx/svdocapt.hxx>
#include <svx/svdocirc.hxx>
#include <svx/svdoedge.hxx>
#include <svx/svdograf.hxx>
#include <svx/svdoole2.hxx>
#include <svx/svdundo.hxx>
#include <svx/svxids.hrc>
#include <i18nlangtag/mslangid.hxx>
#include <editeng/unolingu.hxx>
#include <svx/drawitem.hxx>
#include <editeng/fhgtitem.hxx>
#include <editeng/scriptspaceitem.hxx>
#include <svx/shapepropertynotifier.hxx>
#include <sfx2/viewsh.hxx>
#include <sfx2/docfile.hxx>
#include <sfx2/objsh.hxx>
#include <sot/storage.hxx>
#include <svl/itempool.hxx>
#include <vcl/virdev.hxx>
#include <vcl/svapp.hxx>
#include <vcl/settings.hxx>
#include <unotools/configmgr.hxx>
#include <unotools/pathoptions.hxx>
#include <basegfx/polygon/b2dpolygon.hxx>
#include <basegfx/polygon/b2dpolygontools.hxx>
#include <drwlayer.hxx>
#include <drawpage.hxx>
#include <global.hxx>
#include <document.hxx>
#include <rechead.hxx>
#include <userdat.hxx>
#include <markdata.hxx>
#include <globstr.hrc>
#include <scresid.hxx>
#include <scmod.hxx>
#include <chartarr.hxx>
#include <postit.hxx>
#include <attrib.hxx>
#include <charthelper.hxx>
#include <table.hxx>
#include <basegfx/matrix/b2dhommatrix.hxx>
#include <vcl/field.hxx>
#include <memory>
#define DET_ARROW_OFFSET 1000
using namespace ::com::sun::star;
static E3dObjFactory* pF3d = nullptr;
static sal_uInt16 nInst = 0;
SfxObjectShell* ScDrawLayer::pGlobalDrawPersist = nullptr;
bool bDrawIsInUndo = false; //TODO: Member
ScUndoObjData::ScUndoObjData( SdrObject* pObjP, const ScAddress& rOS, const ScAddress& rOE,
const ScAddress& rNS, const ScAddress& rNE ) :
SdrUndoObj( *pObjP ),
aOldStt( rOS ),
aOldEnd( rOE ),
aNewStt( rNS ),
aNewEnd( rNE )
{
}
ScUndoObjData::~ScUndoObjData()
{
}
void ScUndoObjData::Undo()
{
ScDrawObjData* pData = ScDrawLayer::GetObjData( pObj );
OSL_ENSURE(pData,"ScUndoObjData: Data missing");
if (pData)
{
pData->maStart = aOldStt;
pData->maEnd = aOldEnd;
}
// Undo also an untransformed anchor
pData = ScDrawLayer::GetNonRotatedObjData( pObj );
if (pData)
{
pData->maStart = aOldStt;
pData->maEnd = aOldEnd;
}
}
void ScUndoObjData::Redo()
{
ScDrawObjData* pData = ScDrawLayer::GetObjData( pObj );
OSL_ENSURE(pData,"ScUndoObjData: Data missing");
if (pData)
{
pData->maStart = aNewStt;
pData->maEnd = aNewEnd;
}
// Redo also an untransformed anchor
pData = ScDrawLayer::GetNonRotatedObjData( pObj );
if (pData)
{
pData->maStart = aNewStt;
pData->maEnd = aNewEnd;
}
}
ScUndoAnchorData::ScUndoAnchorData( SdrObject* pObjP, ScDocument* pDoc, SCTAB nTab ) :
SdrUndoObj( *pObjP ),
mpDoc( pDoc ),
mnTab( nTab )
{
mbWasCellAnchored = ScDrawLayer::IsCellAnchored( *pObjP );
mbWasResizeWithCell = ScDrawLayer::IsResizeWithCell( *pObjP );
}
ScUndoAnchorData::~ScUndoAnchorData()
{
}
void ScUndoAnchorData::Undo()
{
// Trigger Object Change
if (pObj->IsInserted() && pObj->getSdrPageFromSdrObject())
{
SdrHint aHint(SdrHintKind::ObjectChange, *pObj);
pObj->getSdrModelFromSdrObject().Broadcast(aHint);
}
if (mbWasCellAnchored)
ScDrawLayer::SetCellAnchoredFromPosition(*pObj, *mpDoc, mnTab, mbWasResizeWithCell);
else
ScDrawLayer::SetPageAnchored( *pObj );
}
void ScUndoAnchorData::Redo()
{
if (mbWasCellAnchored)
ScDrawLayer::SetPageAnchored( *pObj );
else
ScDrawLayer::SetCellAnchoredFromPosition(*pObj, *mpDoc, mnTab, mbWasResizeWithCell);
// Trigger Object Change
if (pObj->IsInserted() && pObj->getSdrPageFromSdrObject())
{
SdrHint aHint(SdrHintKind::ObjectChange, *pObj);
pObj->getSdrModelFromSdrObject().Broadcast(aHint);
}
}
ScTabDeletedHint::ScTabDeletedHint( SCTAB nTabNo ) :
nTab( nTabNo )
{
}
ScTabDeletedHint::~ScTabDeletedHint()
{
}
ScTabSizeChangedHint::ScTabSizeChangedHint( SCTAB nTabNo ) :
nTab( nTabNo )
{
}
ScTabSizeChangedHint::~ScTabSizeChangedHint()
{
}
#define MAXMM 10000000
inline long TwipsToHmm (long nVal)
{
return static_cast< long >( MetricField::ConvertDoubleValue (static_cast<sal_Int64>(nVal), 0, 0,
FUNIT_TWIP, FUNIT_100TH_MM) );
}
inline long HmmToTwips (long nVal)
{
return static_cast< long > ( MetricField::ConvertDoubleValue (static_cast<sal_Int64>(nVal), 0, 0,
FUNIT_100TH_MM, FUNIT_TWIP) );
}
static void lcl_ReverseTwipsToMM( tools::Rectangle& rRect )
{
rRect.SetLeft( HmmToTwips( rRect.Left() ) );
rRect.SetRight( HmmToTwips( rRect.Right() ) );
rRect.SetTop( HmmToTwips( rRect.Top()) );
rRect.SetBottom( HmmToTwips(rRect.Bottom()) );
}
static ScRange lcl_getClipRangeFromClipDoc(ScDocument* pClipDoc, SCTAB nClipTab)
{
if (!pClipDoc)
return ScRange();
SCCOL nClipStartX;
SCROW nClipStartY;
SCCOL nClipEndX;
SCROW nClipEndY;
pClipDoc->GetClipStart(nClipStartX, nClipStartY);
pClipDoc->GetClipArea(nClipEndX, nClipEndY, true);
nClipEndX = nClipEndX + nClipStartX;
nClipEndY += nClipStartY; // GetClipArea returns the difference
return ScRange(nClipStartX, nClipStartY, nClipTab, nClipEndX, nClipEndY, nClipTab);
}
ScDrawLayer::ScDrawLayer( ScDocument* pDocument, const OUString& rName ) :
FmFormModel(
nullptr,
pGlobalDrawPersist ? pGlobalDrawPersist : (pDocument ? pDocument->GetDocumentShell() : nullptr)),
aName( rName ),
pDoc( pDocument ),
bRecording( false ),
bAdjustEnabled( true ),
bHyphenatorSet( false )
{
pGlobalDrawPersist = nullptr; // Only use once
SfxObjectShell* pObjSh = pDocument ? pDocument->GetDocumentShell() : nullptr;
XColorListRef pXCol = XColorList::GetStdColorList();
if ( pObjSh )
{
SetObjectShell( pObjSh );
// set color table
const SvxColorListItem* pColItem = pObjSh->GetItem( SID_COLOR_TABLE );
if ( pColItem )
pXCol = pColItem->GetColorList();
}
SetPropertyList( static_cast<XPropertyList *> (pXCol.get()) );
SetSwapGraphics();
SetScaleUnit(MapUnit::Map100thMM);
SfxItemPool& rPool = GetItemPool();
rPool.SetDefaultMetric(MapUnit::Map100thMM);
SvxFrameDirectionItem aModeItem( SvxFrameDirection::Environment, EE_PARA_WRITINGDIR );
rPool.SetPoolDefaultItem( aModeItem );
// #i33700#
// Set shadow distance defaults as PoolDefaultItems. Details see bug.
rPool.SetPoolDefaultItem(makeSdrShadowXDistItem(300));
rPool.SetPoolDefaultItem(makeSdrShadowYDistItem(300));
// default for script spacing depends on locale, see SdDrawDocument ctor in sd
LanguageType eOfficeLanguage = Application::GetSettings().GetLanguageTag().getLanguageType();
if (MsLangId::isKorean(eOfficeLanguage) || eOfficeLanguage == LANGUAGE_JAPANESE)
{
// secondary is edit engine pool
rPool.GetSecondaryPool()->SetPoolDefaultItem( SvxScriptSpaceItem( false, EE_PARA_ASIANCJKSPACING ) );
}
rPool.FreezeIdRanges(); // the pool is also used directly
SdrLayerAdmin& rAdmin = GetLayerAdmin();
rAdmin.NewLayer("vorne", sal_uInt8(SC_LAYER_FRONT));
rAdmin.NewLayer("hinten", sal_uInt8(SC_LAYER_BACK));
rAdmin.NewLayer("intern", sal_uInt8(SC_LAYER_INTERN));
rAdmin.NewLayer("Controls", sal_uInt8(SC_LAYER_CONTROLS));
rAdmin.NewLayer("hidden", sal_uInt8(SC_LAYER_HIDDEN));
// "Controls" is new - must also be created when loading
// Set link for URL-Fields
ScModule* pScMod = SC_MOD();
Outliner& rOutliner = GetDrawOutliner();
rOutliner.SetCalcFieldValueHdl( LINK( pScMod, ScModule, CalcFieldValueHdl ) );
Outliner& rHitOutliner = GetHitTestOutliner();
rHitOutliner.SetCalcFieldValueHdl( LINK( pScMod, ScModule, CalcFieldValueHdl ) );
// set FontHeight pool defaults without changing static SdrEngineDefaults
SfxItemPool* pOutlinerPool = rOutliner.GetEditTextObjectPool();
if ( pOutlinerPool )
{
pItemPool->SetPoolDefaultItem(SvxFontHeightItem( 423, 100, EE_CHAR_FONTHEIGHT )); // 12Pt
pItemPool->SetPoolDefaultItem(SvxFontHeightItem( 423, 100, EE_CHAR_FONTHEIGHT_CJK )); // 12Pt
pItemPool->SetPoolDefaultItem(SvxFontHeightItem( 423, 100, EE_CHAR_FONTHEIGHT_CTL )); // 12Pt
}
SfxItemPool* pHitOutlinerPool = rHitOutliner.GetEditTextObjectPool();
if ( pHitOutlinerPool )
{
pHitOutlinerPool->SetPoolDefaultItem(SvxFontHeightItem( 423, 100, EE_CHAR_FONTHEIGHT )); // 12Pt
pHitOutlinerPool->SetPoolDefaultItem(SvxFontHeightItem( 423, 100, EE_CHAR_FONTHEIGHT_CJK )); // 12Pt
pHitOutlinerPool->SetPoolDefaultItem(SvxFontHeightItem( 423, 100, EE_CHAR_FONTHEIGHT_CTL )); // 12Pt
}
// initial undo mode as in Calc document
if( pDoc )
EnableUndo( pDoc->IsUndoEnabled() );
// URL-Buttons have no handler anymore, all is done by themselves
if( !nInst++ )
{
pF3d = new E3dObjFactory;
}
}
ScDrawLayer::~ScDrawLayer()
{
Broadcast(SdrHint(SdrHintKind::ModelCleared));
ClearModel(true);
pUndoGroup.reset();
if( !--nInst )
{
delete pF3d;
pF3d = nullptr;
}
}
void ScDrawLayer::UseHyphenator()
{
if (!bHyphenatorSet)
{
css::uno::Reference< css::linguistic2::XHyphenator >
xHyphenator = LinguMgr::GetHyphenator();
GetDrawOutliner().SetHyphenator( xHyphenator );
GetHitTestOutliner().SetHyphenator( xHyphenator );
bHyphenatorSet = true;
}
}
SdrPage* ScDrawLayer::AllocPage(bool bMasterPage)
{
return new ScDrawPage(*this, bMasterPage);
}
bool ScDrawLayer::HasObjects() const
{
bool bFound = false;
sal_uInt16 nCount = GetPageCount();
for (sal_uInt16 i=0; i<nCount && !bFound; i++)
if (GetPage(i)->GetObjCount())
bFound = true;
return bFound;
}
SdrModel* ScDrawLayer::AllocModel() const
{
// Allocated model (for clipboard etc) must not have a pointer
// to the original model's document, pass NULL as document:
return new ScDrawLayer( nullptr, aName );
}
bool ScDrawLayer::ScAddPage( SCTAB nTab )
{
if (bDrawIsInUndo)
return false; // not inserted
ScDrawPage* pPage = static_cast<ScDrawPage*>(AllocPage( false ));
InsertPage(pPage, static_cast<sal_uInt16>(nTab));
if (bRecording)
AddCalcUndo(o3tl::make_unique<SdrUndoNewPage>(*pPage));
ResetTab(nTab, pDoc->GetTableCount()-1);
return true; // inserted
}
void ScDrawLayer::ScRemovePage( SCTAB nTab )
{
if (bDrawIsInUndo)
return;
Broadcast( ScTabDeletedHint( nTab ) );
if (bRecording)
{
SdrPage* pPage = GetPage(static_cast<sal_uInt16>(nTab));
AddCalcUndo(o3tl::make_unique<SdrUndoDelPage>(*pPage)); // Undo-Action becomes the page owner
RemovePage( static_cast<sal_uInt16>(nTab) ); // just deliver, not deleting
}
else
DeletePage( static_cast<sal_uInt16>(nTab) ); // just get rid of it
ResetTab(nTab, pDoc->GetTableCount()-1);
}
void ScDrawLayer::ScRenamePage( SCTAB nTab, const OUString& rNewName )
{
ScDrawPage* pPage = static_cast<ScDrawPage*>( GetPage(static_cast<sal_uInt16>(nTab)) );
if (pPage)
pPage->SetName(rNewName);
}
void ScDrawLayer::ScMovePage( sal_uInt16 nOldPos, sal_uInt16 nNewPos )
{
MovePage( nOldPos, nNewPos );
sal_uInt16 nMinPos = std::min(nOldPos, nNewPos);
ResetTab(nMinPos, pDoc->GetTableCount()-1);
}
void ScDrawLayer::ScCopyPage( sal_uInt16 nOldPos, sal_uInt16 nNewPos )
{
if (bDrawIsInUndo)
return;
SdrPage* pOldPage = GetPage(nOldPos);
SdrPage* pNewPage = GetPage(nNewPos);
// Copying
if (pOldPage && pNewPage)
{
SCTAB nOldTab = static_cast<SCTAB>(nOldPos);
SCTAB nNewTab = static_cast<SCTAB>(nNewPos);
SdrObjListIter aIter( pOldPage, SdrIterMode::Flat );
SdrObject* pOldObject = aIter.Next();
while (pOldObject)
{
ScDrawObjData* pOldData = GetObjData(pOldObject);
if (pOldData)
{
pOldData->maStart.SetTab(nOldTab);
pOldData->maEnd.SetTab(nOldTab);
}
// Clone to target SdrModel
SdrObject* pNewObject(pOldObject->CloneSdrObject(*this));
pNewObject->NbcMove(Size(0,0));
pNewPage->InsertObject( pNewObject );
ScDrawObjData* pNewData = GetObjData(pNewObject);
if (pNewData)
{
pNewData->maStart.SetTab(nNewTab);
pNewData->maEnd.SetTab(nNewTab);
}
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoInsertObj>( *pNewObject ) );
pOldObject = aIter.Next();
}
}
ResetTab(static_cast<SCTAB>(nNewPos), pDoc->GetTableCount()-1);
}
void ScDrawLayer::ResetTab( SCTAB nStart, SCTAB nEnd )
{
SCTAB nPageSize = static_cast<SCTAB>(GetPageCount());
if (nPageSize < 0)
// No drawing pages exist.
return;
if (nEnd >= nPageSize)
// Avoid iterating beyond the last existing page.
nEnd = nPageSize - 1;
for (SCTAB i = nStart; i <= nEnd; ++i)
{
SdrPage* pPage = GetPage(static_cast<sal_uInt16>(i));
if (!pPage)
continue;
SdrObjListIter aIter(pPage, SdrIterMode::Flat);
for (SdrObject* pObj = aIter.Next(); pObj; pObj = aIter.Next())
{
ScDrawObjData* pData = GetObjData(pObj);
if (!pData)
continue;
pData->maStart.SetTab(i);
pData->maEnd.SetTab(i);
}
}
}
inline bool IsInBlock( const ScAddress& rPos, SCCOL nCol1,SCROW nRow1, SCCOL nCol2,SCROW nRow2 )
{
return rPos.Col() >= nCol1 && rPos.Col() <= nCol2 &&
rPos.Row() >= nRow1 && rPos.Row() <= nRow2;
}
void ScDrawLayer::MoveCells( SCTAB nTab, SCCOL nCol1,SCROW nRow1, SCCOL nCol2,SCROW nRow2,
SCCOL nDx,SCROW nDy, bool bUpdateNoteCaptionPos )
{
SdrPage* pPage = GetPage(static_cast<sal_uInt16>(nTab));
OSL_ENSURE(pPage,"Page not found");
if (!pPage)
return;
bool bNegativePage = pDoc && pDoc->IsNegativePage( nTab );
const size_t nCount = pPage->GetObjCount();
for ( size_t i = 0; i < nCount; ++i )
{
SdrObject* pObj = pPage->GetObj( i );
ScDrawObjData* pData = GetObjDataTab( pObj, nTab );
if( pData )
{
const ScAddress aOldStt = pData->maStart;
const ScAddress aOldEnd = pData->maEnd;
bool bChange = false;
if ( aOldStt.IsValid() && IsInBlock( aOldStt, nCol1,nRow1, nCol2,nRow2 ) )
{
pData->maStart.IncCol( nDx );
pData->maStart.IncRow( nDy );
bChange = true;
}
if ( aOldEnd.IsValid() && IsInBlock( aOldEnd, nCol1,nRow1, nCol2,nRow2 ) )
{
pData->maEnd.IncCol( nDx );
pData->maEnd.IncRow( nDy );
bChange = true;
}
if (bChange)
{
if ( dynamic_cast<const SdrRectObj*>( pObj) != nullptr && pData->maStart.IsValid() && pData->maEnd.IsValid() )
pData->maStart.PutInOrder( pData->maEnd );
// Update also an untransformed anchor that's what we stored ( and still do ) to xml
ScDrawObjData* pNoRotatedAnchor = GetNonRotatedObjData( pObj );
if ( pNoRotatedAnchor )
{
pNoRotatedAnchor->maStart = pData->maStart;
pNoRotatedAnchor->maEnd = pData->maEnd;
}
AddCalcUndo( o3tl::make_unique<ScUndoObjData>( pObj, aOldStt, aOldEnd, pData->maStart, pData->maEnd ) );
RecalcPos( pObj, *pData, bNegativePage, bUpdateNoteCaptionPos );
}
}
}
}
void ScDrawLayer::SetPageSize( sal_uInt16 nPageNo, const Size& rSize, bool bUpdateNoteCaptionPos )
{
SdrPage* pPage = GetPage(nPageNo);
if (pPage)
{
if ( rSize != pPage->GetSize() )
{
pPage->SetSize( rSize );
Broadcast( ScTabSizeChangedHint( static_cast<SCTAB>(nPageNo) ) ); // SetWorkArea() on the views
}
// Implement Detective lines (adjust to new heights / widths)
// even if size is still the same
// (individual rows/columns can have been changed))
bool bNegativePage = pDoc && pDoc->IsNegativePage( static_cast<SCTAB>(nPageNo) );
// Disable mass broadcasts from drawing objects' position changes.
bool bWasLocked = isLocked();
setLock(true);
const size_t nCount = pPage->GetObjCount();
for ( size_t i = 0; i < nCount; ++i )
{
SdrObject* pObj = pPage->GetObj( i );
ScDrawObjData* pData = GetObjDataTab( pObj, static_cast<SCTAB>(nPageNo) );
if( pData )
RecalcPos( pObj, *pData, bNegativePage, bUpdateNoteCaptionPos );
}
setLock(bWasLocked);
}
}
namespace
{
//Can't have a zero width dimension
tools::Rectangle lcl_makeSafeRectangle(const tools::Rectangle &rNew)
{
tools::Rectangle aRect = rNew;
if (aRect.Bottom() == aRect.Top())
aRect.SetBottom( aRect.Top()+1 );
if (aRect.Right() == aRect.Left())
aRect.SetRight( aRect.Left()+1 );
return aRect;
}
Point lcl_calcAvailableDiff(const ScDocument &rDoc, SCCOL nCol, SCROW nRow, SCTAB nTab, const Point &aWantedDiff)
{
Point aAvailableDiff(aWantedDiff);
long nHeight = static_cast<long>(rDoc.GetRowHeight( nRow, nTab ) * HMM_PER_TWIPS);
long nWidth = static_cast<long>(rDoc.GetColWidth( nCol, nTab ) * HMM_PER_TWIPS);
if (aAvailableDiff.Y() > nHeight)
aAvailableDiff.setY( nHeight );
if (aAvailableDiff.X() > nWidth)
aAvailableDiff.setX( nWidth );
return aAvailableDiff;
}
tools::Rectangle lcl_UpdateCalcPoly(basegfx::B2DPolygon &rCalcPoly, int nWhichPoint, const Point &rPos)
{
rCalcPoly.setB2DPoint(nWhichPoint, basegfx::B2DPoint(rPos.X(), rPos.Y()));
basegfx::B2DRange aRange(basegfx::utils::getRange(rCalcPoly));
return tools::Rectangle(static_cast<long>(aRange.getMinX()), static_cast<long>(aRange.getMinY()),
static_cast<long>(aRange.getMaxX()), static_cast<long>(aRange.getMaxY()));
}
}
void ScDrawLayer::ResizeLastRectFromAnchor(const SdrObject* pObj, ScDrawObjData& rData,
bool bUseLogicRect, bool bNegativePage, bool bCanResize,
bool bHiddenAsZero)
{
tools::Rectangle aRect = bUseLogicRect ? pObj->GetLogicRect() : pObj->GetSnapRect();
SCCOL nCol1 = rData.maStart.Col();
SCROW nRow1 = rData.maStart.Row();
SCTAB nTab1 = rData.maStart.Tab();
SCCOL nCol2 = rData.maEnd.Col();
SCROW nRow2 = rData.maEnd.Row();
SCTAB nTab2 = rData.maEnd.Tab();
Point aPos(pDoc->GetColOffset(nCol1, nTab1, bHiddenAsZero),
pDoc->GetRowOffset(nRow1, nTab1, bHiddenAsZero));
aPos.setX(TwipsToHmm(aPos.X()));
aPos.setY(TwipsToHmm(aPos.Y()));
aPos += lcl_calcAvailableDiff(*pDoc, nCol1, nRow1, nTab1, rData.maStartOffset);
aRect.SetPos(aPos);
if (bCanResize)
{
tools::Rectangle aLastCellRect = rData.getLastCellRect();
// If the row was hidden before, or we don't have a valid cell rect, calculate the
// new rect based on the end point.
// Also when the end point is set, we need to consider it.
if (rData.mbWasInHiddenRow || aLastCellRect.IsEmpty() || nRow1 != nRow2 || nCol1 != nCol2)
{
Point aEnd(pDoc->GetColOffset(nCol2, nTab2, bHiddenAsZero),
pDoc->GetRowOffset(nRow2, nTab2, bHiddenAsZero));
aEnd.setX(TwipsToHmm(aEnd.X()));
aEnd.setY(TwipsToHmm(aEnd.Y()));
aEnd += lcl_calcAvailableDiff(*pDoc, nCol2, nRow2, nTab2, rData.maEndOffset);
aRect = tools::Rectangle(aPos, aEnd);
}
else if (!aLastCellRect.IsEmpty())
{
// We calculate based on the last cell rect to be able to scale the image
// as much as the cell was scaled.
// Still, we keep the image in its current cell (to keep start anchor == end anchor)
tools::Rectangle aCurrentCellRect = GetCellRect(*GetDocument(), rData.maStart, true);
double fWidthFactor = static_cast<double>(aCurrentCellRect.GetWidth())
/ static_cast<double>(aLastCellRect.GetWidth());
double fHeightFactor = static_cast<double>(aCurrentCellRect.GetHeight())
/ static_cast<double>(aLastCellRect.GetHeight());
bool bIsGrowingLarger = aLastCellRect.GetWidth() * aLastCellRect.GetHeight()
< aCurrentCellRect.GetWidth() * aCurrentCellRect.GetHeight();
if (pObj->shouldKeepAspectRatio())
{
tools::Rectangle aRectIncludingOffset = aRect;
aRectIncludingOffset.setWidth(aRect.GetWidth() + rData.maStartOffset.X());
aRectIncludingOffset.setHeight(aRect.GetHeight() + rData.maStartOffset.Y());
long nWidth = aRectIncludingOffset.GetWidth();
assert(nWidth && "div-by-zero");
double fMaxWidthFactor = static_cast<double>(aCurrentCellRect.GetWidth())
/ static_cast<double>(nWidth);
long nHeight = aRectIncludingOffset.GetHeight();
assert(nHeight && "div-by-zero");
double fMaxHeightFactor = static_cast<double>(aCurrentCellRect.GetHeight())
/ static_cast<double>(nHeight);
double fMaxFactor = std::min(fMaxHeightFactor, fMaxWidthFactor);
if (bIsGrowingLarger) // cell is growing larger
{
// To actually grow the image, we need to take the max
fWidthFactor = fHeightFactor = std::max(fWidthFactor, fHeightFactor);
}
else // cell is growing smaller, take the min
{
fWidthFactor = fHeightFactor = std::min(fWidthFactor, fHeightFactor);
}
// We don't want the image to become larger than the current cell
fWidthFactor = fHeightFactor = std::min(fWidthFactor, fMaxFactor);
}
// When shrinking the cell, and the image still fits in the smaller cell, don't resize it at all
if (bIsGrowingLarger
|| rData.getShapeRect().GetUnion(aCurrentCellRect) != aCurrentCellRect)
{
aRect.setWidth(
rtl::math::round(static_cast<double>(aRect.GetWidth()) * fWidthFactor));
aRect.setHeight(
rtl::math::round(static_cast<double>(aRect.GetHeight()) * fHeightFactor));
// Reduce offset also when shrinking
if (!bIsGrowingLarger)
{
Point aAvailableSpaceInCell = Point(aRect.getX() - aLastCellRect.TopLeft().X(),
aRect.getY() - aLastCellRect.TopLeft().Y());
aRect.setX(rtl::math::round(static_cast<double>(aRect.getX())
+ aAvailableSpaceInCell.X() * fWidthFactor));
aRect.setY(rtl::math::round(static_cast<double>(aRect.getY())
+ aAvailableSpaceInCell.Y() * fHeightFactor));
}
}
}
}
if (bNegativePage)
MirrorRectRTL(aRect);
rData.setShapeRect(GetDocument(), lcl_makeSafeRectangle(aRect), pObj->IsVisible());
}
void ScDrawLayer::RecalcPos( SdrObject* pObj, ScDrawObjData& rData, bool bNegativePage, bool bUpdateNoteCaptionPos )
{
OSL_ENSURE( pDoc, "ScDrawLayer::RecalcPos - missing document" );
if( !pDoc )
return;
if (rData.meType == ScDrawObjData::CellNote)
{
OSL_ENSURE( rData.maStart.IsValid(), "ScDrawLayer::RecalcPos - invalid position for cell note" );
/* #i109372# On insert/remove rows/columns/cells: Updating the caption
position must not be done, if the cell containing the note has not
been moved yet in the document. The calling code now passes an
additional boolean stating if the cells are already moved. */
if( bUpdateNoteCaptionPos )
/* When inside an undo action, there may be pending note captions
where cell note is already deleted (thus document cannot find
the note object anymore). The caption will be deleted later
with drawing undo. */
if( ScPostIt* pNote = pDoc->GetNote( rData.maStart ) )
pNote->UpdateCaptionPos( rData.maStart );
return;
}
bool bValid1 = rData.maStart.IsValid();
SCCOL nCol1 = rData.maStart.Col();
SCROW nRow1 = rData.maStart.Row();
SCTAB nTab1 = rData.maStart.Tab();
bool bValid2 = rData.maEnd.IsValid();
SCCOL nCol2 = rData.maEnd.Col();
SCROW nRow2 = rData.maEnd.Row();
SCTAB nTab2 = rData.maEnd.Tab();
if (rData.meType == ScDrawObjData::ValidationCircle)
{
// Validation circle for detective.
rData.setShapeRect(GetDocument(), pObj->GetLogicRect());
Point aPos( pDoc->GetColOffset( nCol1, nTab1 ), pDoc->GetRowOffset( nRow1, nTab1 ) );
aPos.setX(TwipsToHmm( aPos.X() ));
aPos.setY(TwipsToHmm( aPos.Y() ));
// Calculations and values as in detfunc.cxx
Size aSize( TwipsToHmm( pDoc->GetColWidth( nCol1, nTab1) ),
TwipsToHmm( pDoc->GetRowHeight( nRow1, nTab1) ) );
tools::Rectangle aRect( aPos, aSize );
aRect.AdjustLeft( -250 );
aRect.AdjustRight(250 );
aRect.AdjustTop( -70 );
aRect.AdjustBottom(70 );
if ( bNegativePage )
MirrorRectRTL( aRect );
if ( pObj->GetLogicRect() != aRect )
{
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoGeoObj>( *pObj ) );
rData.setShapeRect(GetDocument(), lcl_makeSafeRectangle(aRect));
pObj->SetLogicRect(rData.getShapeRect());
}
}
else if (rData.meType == ScDrawObjData::DetectiveArrow)
{
rData.setShapeRect(GetDocument(), pObj->GetLogicRect());
basegfx::B2DPolygon aCalcPoly;
Point aOrigStartPos(pObj->GetPoint(0));
Point aOrigEndPos(pObj->GetPoint(1));
aCalcPoly.append(basegfx::B2DPoint(aOrigStartPos.X(), aOrigStartPos.Y()));
aCalcPoly.append(basegfx::B2DPoint(aOrigEndPos.X(), aOrigEndPos.Y()));
//TODO: do not create multiple Undos for one object (last one can be omitted then)
SCCOL nLastCol;
SCROW nLastRow;
if( bValid1 )
{
Point aPos( pDoc->GetColOffset( nCol1, nTab1 ), pDoc->GetRowOffset( nRow1, nTab1 ) );
if (!pDoc->ColHidden(nCol1, nTab1, nullptr, &nLastCol))
aPos.AdjustX(pDoc->GetColWidth( nCol1, nTab1 ) / 4 );
if (!pDoc->RowHidden(nRow1, nTab1, nullptr, &nLastRow))
aPos.AdjustY(pDoc->GetRowHeight( nRow1, nTab1 ) / 2 );
aPos.setX(TwipsToHmm( aPos.X() ));
aPos.setY(TwipsToHmm( aPos.Y() ));
Point aStartPos = aPos;
if ( bNegativePage )
aStartPos.setX( -aStartPos.X() ); // don't modify aPos - used below
if ( pObj->GetPoint( 0 ) != aStartPos )
{
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoGeoObj>( *pObj ) );
rData.setShapeRect(GetDocument(), lcl_UpdateCalcPoly(aCalcPoly, 0, aStartPos));
pObj->SetPoint( aStartPos, 0 );
}
if( !bValid2 )
{
Point aEndPos( aPos.X() + DET_ARROW_OFFSET, aPos.Y() - DET_ARROW_OFFSET );
if (aEndPos.Y() < 0)
aEndPos.AdjustY(2 * DET_ARROW_OFFSET);
if ( bNegativePage )
aEndPos.setX( -aEndPos.X() );
if ( pObj->GetPoint( 1 ) != aEndPos )
{
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoGeoObj>( *pObj ) );
rData.setShapeRect(GetDocument(), lcl_UpdateCalcPoly(aCalcPoly, 1, aEndPos));
pObj->SetPoint( aEndPos, 1 );
}
}
}
if( bValid2 )
{
Point aPos( pDoc->GetColOffset( nCol2, nTab2 ), pDoc->GetRowOffset( nRow2, nTab2 ) );
if (!pDoc->ColHidden(nCol2, nTab2, nullptr, &nLastCol))
aPos.AdjustX(pDoc->GetColWidth( nCol2, nTab2 ) / 4 );
if (!pDoc->RowHidden(nRow2, nTab2, nullptr, &nLastRow))
aPos.AdjustY(pDoc->GetRowHeight( nRow2, nTab2 ) / 2 );
aPos.setX(TwipsToHmm( aPos.X() ));
aPos.setY(TwipsToHmm( aPos.Y() ));
Point aEndPos = aPos;
if ( bNegativePage )
aEndPos.setX( -aEndPos.X() ); // don't modify aPos - used below
if ( pObj->GetPoint( 1 ) != aEndPos )
{
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoGeoObj>( *pObj ) );
rData.setShapeRect(GetDocument(), lcl_UpdateCalcPoly(aCalcPoly, 1, aEndPos));
pObj->SetPoint( aEndPos, 1 );
}
if( !bValid1 )
{
Point aStartPos( aPos.X() - DET_ARROW_OFFSET, aPos.Y() - DET_ARROW_OFFSET );
if (aStartPos.X() < 0)
aStartPos.AdjustX(2 * DET_ARROW_OFFSET);
if (aStartPos.Y() < 0)
aStartPos.AdjustY(2 * DET_ARROW_OFFSET);
if ( bNegativePage )
aStartPos.setX( -aStartPos.X() );
if ( pObj->GetPoint( 0 ) != aStartPos )
{
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoGeoObj>( *pObj ) );
rData.setShapeRect(GetDocument(), lcl_UpdateCalcPoly(aCalcPoly, 0, aStartPos));
pObj->SetPoint( aStartPos, 0 );
}
}
}
}
else
{
// Prevent multiple broadcasts during the series of changes.
pObj->getSdrModelFromSdrObject().setLock(true);
bool bCanResize = bValid2 && !pObj->IsResizeProtect() && rData.mbResizeWithCell;
//First time positioning, must be able to at least move it
ScDrawObjData& rNoRotatedAnchor = *GetNonRotatedObjData( pObj, true );
if (rData.getShapeRect().IsEmpty())
{
// Every shape it is saved with an negative offset relative to cell
ScAnchorType aAnchorType = ScDrawLayer::GetAnchorType(*pObj);
if (aAnchorType == SCA_CELL || aAnchorType == SCA_CELL_RESIZE)
{
// tdf#117145 All that TR*etBaseGeometry does here is to translate
// the existing transformation. This can simply be applied to the existing
// matrix, no need to decompose as done before. Also doing this from
// Calc did not change metrics in any way.
const tools::Rectangle aRect(pDoc->GetMMRect(nCol1, nRow1, nCol1 , nRow1, nTab1));
const Point aPoint(bNegativePage ? aRect.Right() : aRect.Left(), aRect.Top());
basegfx::B2DPolyPolygon aPolyPolygon;
basegfx::B2DHomMatrix aOriginalMatrix;
pObj->TRGetBaseGeometry(aOriginalMatrix, aPolyPolygon);
aOriginalMatrix.translate(aPoint.X(), aPoint.Y());
pObj->TRSetBaseGeometry(aOriginalMatrix, aPolyPolygon);
}
// It's confusing ( but blame that we persist the anchor in terms of unrotated shape )
// that the initial anchor we get here is in terms of an unrotated shape ( if the shape is rotated )
// we need to save the old anchor ( for persisting ) and also track any resize or repositions that happen.
// This is an evil hack, having a anchor that is one minute in terms of untransformed object and then later
// in terms of the transformed object is not ideal, similarly having 2 anchors per object is wasteful, can't
// see another way out of this at the moment though.
rNoRotatedAnchor.maStart = rData.maStart;
rNoRotatedAnchor.maEnd = rData.maEnd;
rNoRotatedAnchor.maStartOffset = rData.maStartOffset;
rNoRotatedAnchor.maEndOffset = rData.maEndOffset;
// get bounding rectangle of shape ( include any hidden row/columns ), <sigh> we need to do this
// because if the shape is rotated the anchor from xml is in terms of the unrotated shape, if
// the shape is hidden ( by the rows that contain the shape being hidden ) then our hack of
// trying to infer the 'real' e.g. rotated anchor from the SnapRect will fail (because the LogicRect will
// not have the correct position or size). The only way we can possible do this is to first get the
// 'unrotated' shape dimensions from the persisted Anchor (from xml) and then 'create' an Anchor from the
// associated rotated shape (note: we do this by actually setting the LogicRect for the shape temporarily to the
// *full* size then grabbing the SnapRect (which gives the transformed rotated dimensions), it would be
// wonderful if we could do this mathematically without having to temporarily tweak the object... otoh this way
// is guaranteed to get consistent results)
ResizeLastRectFromAnchor( pObj, rData, true, bNegativePage, bCanResize, false );
// aFullRect contains the unrotated size and position of the shape (regardless of any hidden row/columns)
tools::Rectangle aFullRect = rData.getShapeRect();
// get current size and position from the anchor for use later
ResizeLastRectFromAnchor( pObj, rNoRotatedAnchor, true, bNegativePage, bCanResize );
// resize/position the shape to *full* size e.g. how it would be ( if no hidden rows/cols affected things )
pObj->SetLogicRect(aFullRect);
// Ok, here is more nastiness, from xml the Anchor is in terms of the LogicRect which is the
// untransformed unrotated shape, here we swap out that initial anchor and from now on use
// an Anchor based on the SnapRect ( which is what you see on the screen )
ScDrawLayer::GetCellAnchorFromPosition( *pObj, rData, *pDoc, nTab1, false, false );
// reset shape to true 'maybe affected by hidden rows/cols' size calculated previously
pObj->SetLogicRect(rNoRotatedAnchor.getShapeRect());
}
// update anchor with snap rect
ResizeLastRectFromAnchor( pObj, rData, false, bNegativePage, bCanResize );
if( bCanResize )
{
tools::Rectangle aNew = rData.getShapeRect();
if ( pObj->GetSnapRect() != aNew )
{
tools::Rectangle aOld(pObj->GetSnapRect());
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoGeoObj>( *pObj ) );
long nOldWidth = aOld.GetWidth();
long nOldHeight = aOld.GetHeight();
if (pObj->IsPolyObj() && nOldWidth && nOldHeight)
{
// Polyline objects need special treatment.
Size aSizeMove(aNew.Left()-aOld.Left(), aNew.Top()-aOld.Top());
pObj->NbcMove(aSizeMove);
double fXFrac = static_cast<double>(aNew.GetWidth()) / static_cast<double>(nOldWidth);
double fYFrac = static_cast<double>(aNew.GetHeight()) / static_cast<double>(nOldHeight);
pObj->NbcResize(aNew.TopLeft(), Fraction(fXFrac), Fraction(fYFrac));
}
// order of these lines is important, modify rData.maLastRect carefully it is used as both
// a value and a flag for initialisation
rData.setShapeRect(GetDocument(), lcl_makeSafeRectangle(rData.getShapeRect()), pObj->IsVisible());
pObj->SetSnapRect(rData.getShapeRect());
// update 'unrotated anchor' it's the anchor we persist, it must be kept in sync
// with the normal Anchor
ResizeLastRectFromAnchor( pObj, rNoRotatedAnchor, true, bNegativePage, bCanResize );
}
}
else
{
Point aPos( rData.getShapeRect().getX(), rData.getShapeRect().getY() );
if ( pObj->GetRelativePos() != aPos )
{
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoGeoObj>( *pObj ) );
pObj->SetRelativePos( aPos );
}
}
/*
* If we were not allowed resize the object, then the end cell anchor
* is possibly incorrect now, and if the object has no end-cell (e.g.
* missing in original .xml) we are also forced to generate one
*/
bool bEndAnchorIsBad = !bValid2 || pObj->IsResizeProtect();
if (bEndAnchorIsBad)
{
// update 'rotated' anchor
ScDrawLayer::UpdateCellAnchorFromPositionEnd(*pObj, rData, *pDoc, nTab1, false);
// update 'unrotated' anchor
ScDrawLayer::UpdateCellAnchorFromPositionEnd(*pObj, rNoRotatedAnchor, *pDoc, nTab1 );
}
// End prevent multiple broadcasts during the series of changes.
pObj->getSdrModelFromSdrObject().setLock(false);
pObj->BroadcastObjectChange();
}
}
bool ScDrawLayer::GetPrintArea( ScRange& rRange, bool bSetHor, bool bSetVer ) const
{
OSL_ENSURE( pDoc, "ScDrawLayer::GetPrintArea without document" );
if ( !pDoc )
return false;
SCTAB nTab = rRange.aStart.Tab();
OSL_ENSURE( rRange.aEnd.Tab() == nTab, "GetPrintArea: Tab differ" );
bool bNegativePage = pDoc->IsNegativePage( nTab );
bool bAny = false;
long nEndX = 0;
long nEndY = 0;
long nStartX = LONG_MAX;
long nStartY = LONG_MAX;
// Calculate borders
if (!bSetHor)
{
nStartX = 0;
SCCOL nStartCol = rRange.aStart.Col();
SCCOL i;
for (i=0; i<nStartCol; i++)
nStartX +=pDoc->GetColWidth(i,nTab);
nEndX = nStartX;
SCCOL nEndCol = rRange.aEnd.Col();
for (i=nStartCol; i<=nEndCol; i++)
nEndX += pDoc->GetColWidth(i,nTab);
nStartX = TwipsToHmm( nStartX );
nEndX = TwipsToHmm( nEndX );
}
if (!bSetVer)
{
nStartY = pDoc->GetRowHeight( 0, rRange.aStart.Row()-1, nTab);
nEndY = nStartY + pDoc->GetRowHeight( rRange.aStart.Row(),
rRange.aEnd.Row(), nTab);
nStartY = TwipsToHmm( nStartY );
nEndY = TwipsToHmm( nEndY );
}
if ( bNegativePage )
{
nStartX = -nStartX; // positions are negative, swap start/end so the same comparisons work
nEndX = -nEndX;
::std::swap( nStartX, nEndX );
}
const SdrPage* pPage = GetPage(static_cast<sal_uInt16>(nTab));
OSL_ENSURE(pPage,"Page not found");
if (pPage)
{
SdrObjListIter aIter( pPage, SdrIterMode::Flat );
SdrObject* pObject = aIter.Next();
while (pObject)
{
//TODO: test Flags (hidden?)
tools::Rectangle aObjRect = pObject->GetCurrentBoundRect();
bool bFit = true;
if ( !bSetHor && ( aObjRect.Right() < nStartX || aObjRect.Left() > nEndX ) )
bFit = false;
if ( !bSetVer && ( aObjRect.Bottom() < nStartY || aObjRect.Top() > nEndY ) )
bFit = false;
// #i104716# don't include hidden note objects
if ( bFit && pObject->GetLayer() != SC_LAYER_HIDDEN )
{
if (bSetHor)
{
if (aObjRect.Left() < nStartX) nStartX = aObjRect.Left();
if (aObjRect.Right() > nEndX) nEndX = aObjRect.Right();
}
if (bSetVer)
{
if (aObjRect.Top() < nStartY) nStartY = aObjRect.Top();
if (aObjRect.Bottom() > nEndY) nEndY = aObjRect.Bottom();
}
bAny = true;
}
pObject = aIter.Next();
}
}
if ( bNegativePage )
{
nStartX = -nStartX; // reverse transformation, so the same cell address calculation works
nEndX = -nEndX;
::std::swap( nStartX, nEndX );
}
if (bAny)
{
OSL_ENSURE( nStartX<=nEndX && nStartY<=nEndY, "Start/End wrong in ScDrawLayer::GetPrintArea" );
if (bSetHor)
{
nStartX = HmmToTwips( nStartX );
nEndX = HmmToTwips( nEndX );
long nWidth;
nWidth = 0;
rRange.aStart.SetCol( 0 );
if (nWidth <= nStartX)
{
for (SCCOL nCol : pDoc->GetColumnsRange(nTab, 0, MAXCOL))
{
nWidth += pDoc->GetColWidth(nCol,nTab);
if (nWidth > nStartX)
{
rRange.aStart.SetCol( nCol );
break;
}
}
}
nWidth = 0;
rRange.aEnd.SetCol( 0 );
if (nWidth <= nEndX)
{
for (SCCOL nCol : pDoc->GetColumnsRange(nTab, 0, MAXCOL)) //TODO: start at Start
{
nWidth += pDoc->GetColWidth(nCol,nTab);
if (nWidth > nEndX)
{
rRange.aEnd.SetCol( nCol );
break;
}
}
}
}
if (bSetVer)
{
nStartY = HmmToTwips( nStartY );
nEndY = HmmToTwips( nEndY );
SCROW nRow = pDoc->GetRowForHeight( nTab, nStartY);
rRange.aStart.SetRow( nRow>0 ? (nRow-1) : 0);
nRow = pDoc->GetRowForHeight( nTab, nEndY);
rRange.aEnd.SetRow( nRow == MAXROW ? MAXROW :
(nRow>0 ? (nRow-1) : 0));
}
}
else
{
if (bSetHor)
{
rRange.aStart.SetCol(0);
rRange.aEnd.SetCol(0);
}
if (bSetVer)
{
rRange.aStart.SetRow(0);
rRange.aEnd.SetRow(0);
}
}
return bAny;
}
void ScDrawLayer::AddCalcUndo( std::unique_ptr<SdrUndoAction> pUndo )
{
if (bRecording)
{
if (!pUndoGroup)
pUndoGroup.reset(new SdrUndoGroup(*this));
pUndoGroup->AddAction( pUndo.release() );
}
}
void ScDrawLayer::BeginCalcUndo(bool bDisableTextEditUsesCommonUndoManager)
{
SetDisableTextEditUsesCommonUndoManager(bDisableTextEditUsesCommonUndoManager);
pUndoGroup.reset();
bRecording = true;
}
std::unique_ptr<SdrUndoGroup> ScDrawLayer::GetCalcUndo()
{
std::unique_ptr<SdrUndoGroup> pRet = std::move(pUndoGroup);
bRecording = false;
SetDisableTextEditUsesCommonUndoManager(false);
return pRet;
}
void ScDrawLayer::MoveArea( SCTAB nTab, SCCOL nCol1,SCROW nRow1, SCCOL nCol2,SCROW nRow2,
SCCOL nDx,SCROW nDy, bool bInsDel, bool bUpdateNoteCaptionPos )
{
OSL_ENSURE( pDoc, "ScDrawLayer::MoveArea without document" );
if ( !pDoc )
return;
if (!bAdjustEnabled)
return;
bool bNegativePage = pDoc->IsNegativePage( nTab );
tools::Rectangle aRect = pDoc->GetMMRect( nCol1, nRow1, nCol2, nRow2, nTab );
lcl_ReverseTwipsToMM( aRect );
//TODO: use twips directly?
Point aMove;
if (nDx > 0)
for (SCCOL s=0; s<nDx; s++)
aMove.AdjustX(pDoc->GetColWidth(s+nCol1,nTab) );
else
for (SCCOL s=-1; s>=nDx; s--)
aMove.AdjustX( -(pDoc->GetColWidth(s+nCol1,nTab)) );
if (nDy > 0)
aMove.AdjustY(pDoc->GetRowHeight( nRow1, nRow1+nDy-1, nTab) );
else
aMove.AdjustY( -sal_Int16(pDoc->GetRowHeight( nRow1+nDy, nRow1-1, nTab)) );
if ( bNegativePage )
aMove.setX( -aMove.X() );
Point aTopLeft = aRect.TopLeft(); // Beginning when zoomed out
if (bInsDel)
{
if ( aMove.X() != 0 && nDx < 0 ) // nDx counts cells, sign is independent of RTL
aTopLeft.AdjustX(aMove.X() );
if ( aMove.Y() < 0 )
aTopLeft.AdjustY(aMove.Y() );
}
// Detectiv arrows: Adjust cell position
MoveCells( nTab, nCol1,nRow1, nCol2,nRow2, nDx,nDy, bUpdateNoteCaptionPos );
}
bool ScDrawLayer::HasObjectsInRows( SCTAB nTab, SCROW nStartRow, SCROW nEndRow )
{
OSL_ENSURE( pDoc, "ScDrawLayer::HasObjectsInRows without document" );
if ( !pDoc )
return false;
SdrPage* pPage = GetPage(static_cast<sal_uInt16>(nTab));
OSL_ENSURE(pPage,"Page not found");
if (!pPage)
return false;
// for an empty page, there's no need to calculate the row heights
if (!pPage->GetObjCount())
return false;
tools::Rectangle aTestRect;
aTestRect.AdjustTop(pDoc->GetRowHeight( 0, nStartRow-1, nTab) );
if (nEndRow==MAXROW)
aTestRect.SetBottom( MAXMM );
else
{
aTestRect.SetBottom( aTestRect.Top() );
aTestRect.AdjustBottom(pDoc->GetRowHeight( nStartRow, nEndRow, nTab) );
aTestRect.SetBottom(TwipsToHmm( aTestRect.Bottom() ));
}
aTestRect.SetTop(TwipsToHmm( aTestRect.Top() ));
aTestRect.SetLeft( 0 );
aTestRect.SetRight( MAXMM );
bool bNegativePage = pDoc->IsNegativePage( nTab );
if ( bNegativePage )
MirrorRectRTL( aTestRect );
bool bFound = false;
tools::Rectangle aObjRect;
SdrObjListIter aIter( pPage );
SdrObject* pObject = aIter.Next();
while ( pObject && !bFound )
{
aObjRect = pObject->GetSnapRect(); //TODO: GetLogicRect ?
if (aTestRect.IsInside(aObjRect.TopLeft()) || aTestRect.IsInside(aObjRect.BottomLeft()))
bFound = true;
pObject = aIter.Next();
}
return bFound;
}
void ScDrawLayer::DeleteObjectsInArea( SCTAB nTab, SCCOL nCol1,SCROW nRow1,
SCCOL nCol2,SCROW nRow2 )
{
OSL_ENSURE( pDoc, "ScDrawLayer::DeleteObjectsInArea without document" );
if ( !pDoc )
return;
SdrPage* pPage = GetPage(static_cast<sal_uInt16>(nTab));
OSL_ENSURE(pPage,"Page ?");
if (!pPage)
return;
pPage->RecalcObjOrdNums();
const size_t nObjCount = pPage->GetObjCount();
if (nObjCount)
{
size_t nDelCount = 0;
tools::Rectangle aDelRect = pDoc->GetMMRect( nCol1, nRow1, nCol2, nRow2, nTab );
std::unique_ptr<SdrObject*[]> ppObj(new SdrObject*[nObjCount]);
SdrObjListIter aIter( pPage, SdrIterMode::Flat );
SdrObject* pObject = aIter.Next();
while (pObject)
{
// do not delete note caption, they are always handled by the cell note
// TODO: detective objects are still deleted, is this desired?
if (!IsNoteCaption( pObject ))
{
tools::Rectangle aObjRect = pObject->GetCurrentBoundRect();
if ( aDelRect.IsInside( aObjRect ) )
ppObj[nDelCount++] = pObject;
}
pObject = aIter.Next();
}
if (bRecording)
for (size_t i=1; i<=nDelCount; ++i)
AddCalcUndo( o3tl::make_unique<SdrUndoRemoveObj>( *ppObj[nDelCount-i] ) );
for (size_t i=1; i<=nDelCount; ++i)
pPage->RemoveObject( ppObj[nDelCount-i]->GetOrdNum() );
}
}
void ScDrawLayer::DeleteObjectsInSelection( const ScMarkData& rMark )
{
OSL_ENSURE( pDoc, "ScDrawLayer::DeleteObjectsInSelection without document" );
if ( !pDoc )
return;
if ( !rMark.IsMultiMarked() )
return;
ScRange aMarkRange;
rMark.GetMultiMarkArea( aMarkRange );
SCTAB nTabCount = pDoc->GetTableCount();
ScMarkData::const_iterator itr = rMark.begin(), itrEnd = rMark.end();
for (; itr != itrEnd && *itr < nTabCount; ++itr)
{
SCTAB nTab = *itr;
SdrPage* pPage = GetPage(static_cast<sal_uInt16>(nTab));
if (pPage)
{
pPage->RecalcObjOrdNums();
const size_t nObjCount = pPage->GetObjCount();
if (nObjCount)
{
size_t nDelCount = 0;
// Rectangle around the whole selection
tools::Rectangle aMarkBound = pDoc->GetMMRect(
aMarkRange.aStart.Col(), aMarkRange.aStart.Row(),
aMarkRange.aEnd.Col(), aMarkRange.aEnd.Row(), nTab );
std::unique_ptr<SdrObject*[]> ppObj(new SdrObject*[nObjCount]);
SdrObjListIter aIter( pPage, SdrIterMode::Flat );
SdrObject* pObject = aIter.Next();
while (pObject)
{
// do not delete note caption, they are always handled by the cell note
// TODO: detective objects are still deleted, is this desired?
if (!IsNoteCaption( pObject ))
{
tools::Rectangle aObjRect = pObject->GetCurrentBoundRect();
if ( aMarkBound.IsInside( aObjRect ) )
{
ScRange aRange = pDoc->GetRange( nTab, aObjRect );
if (rMark.IsAllMarked(aRange))
ppObj[nDelCount++] = pObject;
}
}
pObject = aIter.Next();
}
// Delete objects (backwards)
if (bRecording)
for (size_t i=1; i<=nDelCount; ++i)
AddCalcUndo( o3tl::make_unique<SdrUndoRemoveObj>( *ppObj[nDelCount-i] ) );
for (size_t i=1; i<=nDelCount; ++i)
pPage->RemoveObject( ppObj[nDelCount-i]->GetOrdNum() );
}
}
else
{
OSL_FAIL("pPage?");
}
}
}
void ScDrawLayer::CopyToClip( ScDocument* pClipDoc, SCTAB nTab, const tools::Rectangle& rRange )
{
// copy everything in the specified range into the same page (sheet) in the clipboard doc
SdrPage* pSrcPage = GetPage(static_cast<sal_uInt16>(nTab));
if (pSrcPage)
{
ScDrawLayer* pDestModel = nullptr;
SdrPage* pDestPage = nullptr;
SdrObjListIter aIter( pSrcPage, SdrIterMode::Flat );
SdrObject* pOldObject = aIter.Next();
while (pOldObject)
{
tools::Rectangle aObjRect = pOldObject->GetCurrentBoundRect();
bool bObjectInArea = rRange.IsInside(aObjRect);
const ScDrawObjData* pObjData = ScDrawLayer::GetObjData(pOldObject);
if (pObjData)
{
ScRange aClipRange = lcl_getClipRangeFromClipDoc(pClipDoc, nTab);
bObjectInArea = bObjectInArea || aClipRange.In(pObjData->maStart);
}
// do not copy internal objects (detective) and note captions
if (bObjectInArea && pOldObject->GetLayer() != SC_LAYER_INTERN
&& !IsNoteCaption(pOldObject))
{
if ( !pDestModel )
{
pDestModel = pClipDoc->GetDrawLayer(); // does the document already have a drawing layer?
if ( !pDestModel )
{
// allocate drawing layer in clipboard document only if there are objects to copy
pClipDoc->InitDrawLayer(); //TODO: create contiguous pages
pDestModel = pClipDoc->GetDrawLayer();
}
if (pDestModel)
pDestPage = pDestModel->GetPage( static_cast<sal_uInt16>(nTab) );
}
OSL_ENSURE( pDestPage, "no page" );
if (pDestPage)
{
// Clone to target SdrModel
SdrObject* pNewObject(pOldObject->CloneSdrObject(*pDestModel));
uno::Reference< chart2::XChartDocument > xOldChart( ScChartHelper::GetChartFromSdrObject( pOldObject ) );
if(!xOldChart.is())//#i110034# do not move charts as they lose all their data references otherwise
pNewObject->NbcMove(Size(0,0));
pDestPage->InsertObject( pNewObject );
// no undo needed in clipboard document
// charts are not updated
}
}
pOldObject = aIter.Next();
}
}
}
static bool lcl_IsAllInRange( const ::std::vector< ScRangeList >& rRangesVector, const ScRange& rClipRange )
{
// check if every range of rRangesVector is completely in rClipRange
::std::vector< ScRangeList >::const_iterator aIt = rRangesVector.begin();
for( ;aIt!=rRangesVector.end(); ++aIt )
{
const ScRangeList& rRanges = *aIt;
for ( size_t i = 0, nCount = rRanges.size(); i < nCount; i++ )
{
const ScRange & rRange = rRanges[ i ];
if ( !rClipRange.In( rRange ) )
{
return false; // at least one range is not valid
}
}
}
return true; // everything is fine
}
static bool lcl_MoveRanges( ::std::vector< ScRangeList >& rRangesVector, const ScRange& rSourceRange, const ScAddress& rDestPos )
{
bool bChanged = false;
ScRange aErrorRange( ScAddress::UNINITIALIZED );
::std::vector< ScRangeList >::iterator aIt = rRangesVector.begin();
for( ;aIt!=rRangesVector.end(); ++aIt )
{
ScRangeList& rRanges = *aIt;
for ( size_t i = 0, nCount = rRanges.size(); i < nCount; i++ )
{
ScRange & rRange = rRanges[ i ];
if ( rSourceRange.In( rRange ) )
{
SCCOL nDiffX = rDestPos.Col() - rSourceRange.aStart.Col();
SCROW nDiffY = rDestPos.Row() - rSourceRange.aStart.Row();
SCTAB nDiffZ = rDestPos.Tab() - rSourceRange.aStart.Tab();
if (!rRange.Move( nDiffX, nDiffY, nDiffZ, aErrorRange))
{
assert(!"can't move range");
}
bChanged = true;
}
}
}
return bChanged;
}
void ScDrawLayer::CopyFromClip( ScDrawLayer* pClipModel, SCTAB nSourceTab, const tools::Rectangle& rSourceRange,
const ScAddress& rDestPos, const tools::Rectangle& rDestRange )
{
OSL_ENSURE( pDoc, "ScDrawLayer::CopyFromClip without document" );
if ( !pDoc )
return;
if (!pClipModel)
return;
if (bDrawIsInUndo) //TODO: can this happen?
{
OSL_FAIL("CopyFromClip, bDrawIsInUndo");
return;
}
bool bMirrorObj = ( rSourceRange.Left() < 0 && rSourceRange.Right() < 0 &&
rDestRange.Left() > 0 && rDestRange.Right() > 0 ) ||
( rSourceRange.Left() > 0 && rSourceRange.Right() > 0 &&
rDestRange.Left() < 0 && rDestRange.Right() < 0 );
tools::Rectangle aMirroredSource = rSourceRange;
if ( bMirrorObj )
MirrorRectRTL( aMirroredSource );
SCTAB nDestTab = rDestPos.Tab();
SdrPage* pSrcPage = pClipModel->GetPage(static_cast<sal_uInt16>(nSourceTab));
SdrPage* pDestPage = GetPage(static_cast<sal_uInt16>(nDestTab));
OSL_ENSURE( pSrcPage && pDestPage, "draw page missing" );
if ( !pSrcPage || !pDestPage )
return;
SdrObjListIter aIter( pSrcPage, SdrIterMode::Flat );
SdrObject* pOldObject = aIter.Next();
ScDocument* pClipDoc = pClipModel->GetDocument();
// a clipboard document and its source share the same document item pool,
// so the pointers can be compared to see if this is copy&paste within
// the same document
bool bSameDoc = pDoc && pClipDoc && pDoc->GetPool() == pClipDoc->GetPool();
bool bDestClip = pDoc && pDoc->IsClipboard();
//#i110034# charts need correct sheet names for xml range conversion during load
//so the target sheet name is temporarily renamed (if we have any SdrObjects)
OUString aDestTabName;
bool bRestoreDestTabName = false;
if( pOldObject && !bSameDoc && !bDestClip )
{
if( pDoc && pClipDoc )
{
OUString aSourceTabName;
if( pClipDoc->GetName( nSourceTab, aSourceTabName )
&& pDoc->GetName( nDestTab, aDestTabName ) )
{
if( aSourceTabName != aDestTabName &&
pDoc->ValidNewTabName(aSourceTabName) )
{
bRestoreDestTabName = pDoc->RenameTab( nDestTab, aSourceTabName );
}
}
}
}
// first mirror, then move
Size aMove( rDestRange.Left() - aMirroredSource.Left(), rDestRange.Top() - aMirroredSource.Top() );
long nDestWidth = rDestRange.GetWidth();
long nDestHeight = rDestRange.GetHeight();
long nSourceWidth = rSourceRange.GetWidth();
long nSourceHeight = rSourceRange.GetHeight();
long nWidthDiff = nDestWidth - nSourceWidth;
long nHeightDiff = nDestHeight - nSourceHeight;
Fraction aHorFract(1,1);
Fraction aVerFract(1,1);
bool bResize = false;
// sizes can differ by 1 from twips->1/100mm conversion for equal cell sizes,
// don't resize to empty size when pasting into hidden columns or rows
if ( std::abs(nWidthDiff) > 1 && nDestWidth > 1 && nSourceWidth > 1 )
{
aHorFract = Fraction( nDestWidth, nSourceWidth );
bResize = true;
}
if ( std::abs(nHeightDiff) > 1 && nDestHeight > 1 && nSourceHeight > 1 )
{
aVerFract = Fraction( nDestHeight, nSourceHeight );
bResize = true;
}
Point aRefPos = rDestRange.TopLeft(); // for resizing (after moving)
while (pOldObject)
{
tools::Rectangle aObjRect = pOldObject->GetCurrentBoundRect();
// do not copy internal objects (detective) and note captions
SCTAB nClipTab = bRestoreDestTabName ? nDestTab : nSourceTab;
ScRange aClipRange = lcl_getClipRangeFromClipDoc(pClipDoc, nClipTab);
bool bObjectInArea = rSourceRange.IsInside(aObjRect);
const ScDrawObjData* pObjData = ScDrawLayer::GetObjData(pOldObject);
if (pObjData) // Consider images anchored to the copied cell
bObjectInArea = bObjectInArea || aClipRange.In(pObjData->maStart);
if (bObjectInArea && (pOldObject->GetLayer() != SC_LAYER_INTERN)
&& !IsNoteCaption(pOldObject))
{
// Clone to target SdrModel
SdrObject* pNewObject(pOldObject->CloneSdrObject(*this));
if ( bMirrorObj )
MirrorRTL( pNewObject ); // first mirror, then move
pNewObject->NbcMove( aMove );
if ( bResize )
pNewObject->NbcResize( aRefPos, aHorFract, aVerFract );
pDestPage->InsertObject( pNewObject );
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoInsertObj>( *pNewObject ) );
//#i110034# handle chart data references (after InsertObject)
if ( pNewObject->GetObjIdentifier() == OBJ_OLE2 )
{
uno::Reference< embed::XEmbeddedObject > xIPObj = static_cast<SdrOle2Obj*>(pNewObject)->GetObjRef();
uno::Reference< embed::XClassifiedObject > xClassified( xIPObj, uno::UNO_QUERY );
SvGlobalName aObjectClassName;
if ( xClassified.is() )
{
try {
aObjectClassName = SvGlobalName( xClassified->getClassID() );
} catch( uno::Exception& )
{
// TODO: handle error?
}
}
if ( xIPObj.is() && SotExchange::IsChart( aObjectClassName ) )
{
uno::Reference< chart2::XChartDocument > xNewChart( ScChartHelper::GetChartFromSdrObject( pNewObject ) );
if( xNewChart.is() && !xNewChart->hasInternalDataProvider() )
{
OUString aChartName = static_cast<SdrOle2Obj*>(pNewObject)->GetPersistName();
::std::vector< ScRangeList > aRangesVector;
pDoc->GetChartRanges( aChartName, aRangesVector, pDoc );
if( !aRangesVector.empty() )
{
bool bInSourceRange = false;
if ( pClipDoc )
{
bInSourceRange = lcl_IsAllInRange( aRangesVector, aClipRange );
}
// always lose references when pasting into a clipboard document (transpose)
if ( ( bInSourceRange || bSameDoc ) && !bDestClip )
{
if ( bInSourceRange )
{
if ( rDestPos != aClipRange.aStart )
{
// update the data ranges to the new (copied) position
if ( lcl_MoveRanges( aRangesVector, aClipRange, rDestPos ) )
pDoc->SetChartRanges( aChartName, aRangesVector );
}
}
else
{
// leave the ranges unchanged
}
}
else
{
// pasting into a new document without the complete source data
// -> break connection to source data and switch to own data
uno::Reference< chart::XChartDocument > xOldChartDoc( ScChartHelper::GetChartFromSdrObject( pOldObject ), uno::UNO_QUERY );
uno::Reference< chart::XChartDocument > xNewChartDoc( xNewChart, uno::UNO_QUERY );
if( xOldChartDoc.is() && xNewChartDoc.is() )
xNewChartDoc->attachData( xOldChartDoc->getData() );
// (see ScDocument::UpdateChartListenerCollection, PastingDrawFromOtherDoc)
}
}
}
}
}
}
pOldObject = aIter.Next();
}
if( bRestoreDestTabName )
pDoc->RenameTab( nDestTab, aDestTabName );
}
void ScDrawLayer::MirrorRTL( SdrObject* pObj )
{
sal_uInt16 nIdent = pObj->GetObjIdentifier();
// don't mirror OLE or graphics, otherwise ask the object
// if it can be mirrored
bool bCanMirror = ( nIdent != OBJ_GRAF && nIdent != OBJ_OLE2 );
if (bCanMirror)
{
SdrObjTransformInfoRec aInfo;
pObj->TakeObjInfo( aInfo );
bCanMirror = aInfo.bMirror90Allowed;
}
if (bCanMirror)
{
Point aRef1( 0, 0 );
Point aRef2( 0, 1 );
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoGeoObj>( *pObj ) );
pObj->Mirror( aRef1, aRef2 );
}
else
{
// Move instead of mirroring:
// New start position is negative of old end position
// -> move by sum of start and end position
tools::Rectangle aObjRect = pObj->GetLogicRect();
Size aMoveSize( -(aObjRect.Left() + aObjRect.Right()), 0 );
if (bRecording)
AddCalcUndo( o3tl::make_unique<SdrUndoMoveObj>( *pObj, aMoveSize ) );
pObj->Move( aMoveSize );
}
}
void ScDrawLayer::MirrorRectRTL( tools::Rectangle& rRect )
{
// mirror and swap left/right
long nTemp = rRect.Left();
rRect.SetLeft( -rRect.Right() );
rRect.SetRight( -nTemp );
}
tools::Rectangle ScDrawLayer::GetCellRect( const ScDocument& rDoc, const ScAddress& rPos, bool bMergedCell )
{
tools::Rectangle aCellRect;
OSL_ENSURE( ValidColRowTab( rPos.Col(), rPos.Row(), rPos.Tab() ), "ScDrawLayer::GetCellRect - invalid cell address" );
if( ValidColRowTab( rPos.Col(), rPos.Row(), rPos.Tab() ) )
{
// find top left position of passed cell address
Point aTopLeft;
for( SCCOL nCol = 0; nCol < rPos.Col(); ++nCol )
aTopLeft.AdjustX(rDoc.GetColWidth( nCol, rPos.Tab() ) );
if( rPos.Row() > 0 )
aTopLeft.AdjustY(rDoc.GetRowHeight( 0, rPos.Row() - 1, rPos.Tab() ) );
// find bottom-right position of passed cell address
ScAddress aEndPos = rPos;
if( bMergedCell )
{
const ScMergeAttr* pMerge = rDoc.GetAttr( rPos, ATTR_MERGE );
if( pMerge->GetColMerge() > 1 )
aEndPos.IncCol( pMerge->GetColMerge() - 1 );
if( pMerge->GetRowMerge() > 1 )
aEndPos.IncRow( pMerge->GetRowMerge() - 1 );
}
Point aBotRight = aTopLeft;
for( SCCOL nCol = rPos.Col(); nCol <= aEndPos.Col(); ++nCol )
aBotRight.AdjustX(rDoc.GetColWidth( nCol, rPos.Tab() ) );
aBotRight.AdjustY(rDoc.GetRowHeight( rPos.Row(), aEndPos.Row(), rPos.Tab() ) );
// twips -> 1/100 mm
aTopLeft.setX( static_cast< long >( aTopLeft.X() * HMM_PER_TWIPS ) );
aTopLeft.setY( static_cast< long >( aTopLeft.Y() * HMM_PER_TWIPS ) );
aBotRight.setX( static_cast< long >( aBotRight.X() * HMM_PER_TWIPS ) );
aBotRight.setY( static_cast< long >( aBotRight.Y() * HMM_PER_TWIPS ) );
aCellRect = tools::Rectangle( aTopLeft, aBotRight );
if( rDoc.IsNegativePage( rPos.Tab() ) )
MirrorRectRTL( aCellRect );
}
return aCellRect;
}
OUString ScDrawLayer::GetVisibleName( const SdrObject* pObj )
{
OUString aName = pObj->GetName();
if ( pObj->GetObjIdentifier() == OBJ_OLE2 )
{
// For OLE, the user defined name (GetName) is used
// if it's not empty (accepting possibly duplicate names),
// otherwise the persist name is used so every object appears
// in the Navigator at all.
if ( aName.isEmpty() )
aName = static_cast<const SdrOle2Obj*>(pObj)->GetPersistName();
}
return aName;
}
inline bool IsNamedObject( const SdrObject* pObj, const OUString& rName )
{
// sal_True if rName is the object's Name or PersistName
// (used to find a named object)
return ( pObj->GetName() == rName ||
( pObj->GetObjIdentifier() == OBJ_OLE2 &&
static_cast<const SdrOle2Obj*>(pObj)->GetPersistName() == rName ) );
}
SdrObject* ScDrawLayer::GetNamedObject( const OUString& rName, sal_uInt16 nId, SCTAB& rFoundTab ) const
{
sal_uInt16 nTabCount = GetPageCount();
for (sal_uInt16 nTab=0; nTab<nTabCount; nTab++)
{
const SdrPage* pPage = GetPage(nTab);
OSL_ENSURE(pPage,"Page ?");
if (pPage)
{
SdrObjListIter aIter( pPage, SdrIterMode::DeepWithGroups );
SdrObject* pObject = aIter.Next();
while (pObject)
{
if ( nId == 0 || pObject->GetObjIdentifier() == nId )
if ( IsNamedObject( pObject, rName ) )
{
rFoundTab = static_cast<SCTAB>(nTab);
return pObject;
}
pObject = aIter.Next();
}
}
}
return nullptr;
}
OUString ScDrawLayer::GetNewGraphicName( long* pnCounter ) const
{
OUString aBase = ScResId(STR_GRAPHICNAME) + " ";
bool bThere = true;
OUString aGraphicName;
SCTAB nDummy;
long nId = pnCounter ? *pnCounter : 0;
while (bThere)
{
++nId;
aGraphicName = aBase + OUString::number( nId );
bThere = ( GetNamedObject( aGraphicName, 0, nDummy ) != nullptr );
}
if ( pnCounter )
*pnCounter = nId;
return aGraphicName;
}
void ScDrawLayer::EnsureGraphicNames()
{
// make sure all graphic objects have names (after Excel import etc.)
sal_uInt16 nTabCount = GetPageCount();
for (sal_uInt16 nTab=0; nTab<nTabCount; nTab++)
{
SdrPage* pPage = GetPage(nTab);
OSL_ENSURE(pPage,"Page ?");
if (pPage)
{
SdrObjListIter aIter( pPage, SdrIterMode::DeepWithGroups );
SdrObject* pObject = aIter.Next();
/* The index passed to GetNewGraphicName() will be set to
the used index in each call. This prevents the repeated search
for all names from 1 to current index. */
long nCounter = 0;
while (pObject)
{
if ( pObject->GetObjIdentifier() == OBJ_GRAF && pObject->GetName().isEmpty())
pObject->SetName( GetNewGraphicName( &nCounter ) );
pObject = aIter.Next();
}
}
}
}
namespace
{
SdrObjUserData* GetFirstUserDataOfType(const SdrObject *pObj, sal_uInt16 nId)
{
sal_uInt16 nCount = pObj ? pObj->GetUserDataCount() : 0;
for( sal_uInt16 i = 0; i < nCount; i++ )
{
SdrObjUserData* pData = pObj->GetUserData( i );
if( pData && pData->GetInventor() == SdrInventor::ScOrSwDraw && pData->GetId() == nId )
return pData;
}
return nullptr;
}
void DeleteFirstUserDataOfType(SdrObject *pObj, sal_uInt16 nId)
{
sal_uInt16 nCount = pObj ? pObj->GetUserDataCount() : 0;
for( sal_uInt16 i = nCount; i > 0; i-- )
{
SdrObjUserData* pData = pObj->GetUserData( i-1 );
if( pData && pData->GetInventor() == SdrInventor::ScOrSwDraw && pData->GetId() == nId )
pObj->DeleteUserData(i-1);
}
}
}
void ScDrawLayer::SetVisualCellAnchored( SdrObject &rObj, const ScDrawObjData &rAnchor )
{
ScDrawObjData* pAnchor = GetNonRotatedObjData( &rObj, true );
pAnchor->maStart = rAnchor.maStart;
pAnchor->maEnd = rAnchor.maEnd;
pAnchor->maStartOffset = rAnchor.maStartOffset;
pAnchor->maEndOffset = rAnchor.maEndOffset;
pAnchor->mbResizeWithCell = rAnchor.mbResizeWithCell;
}
void ScDrawLayer::SetCellAnchored( SdrObject &rObj, const ScDrawObjData &rAnchor )
{
ScDrawObjData* pAnchor = GetObjData( &rObj, true );
pAnchor->maStart = rAnchor.maStart;
pAnchor->maEnd = rAnchor.maEnd;
pAnchor->maStartOffset = rAnchor.maStartOffset;
pAnchor->maEndOffset = rAnchor.maEndOffset;
pAnchor->mbResizeWithCell = rAnchor.mbResizeWithCell;
}
void ScDrawLayer::SetCellAnchoredFromPosition( SdrObject &rObj, const ScDocument &rDoc, SCTAB nTab,
bool bResizeWithCell )
{
ScDrawObjData aAnchor;
// set anchor in terms of the visual ( SnapRect )
// object ( e.g. for when object is rotated )
GetCellAnchorFromPosition( rObj, aAnchor, rDoc, nTab, false );
aAnchor.mbResizeWithCell = bResizeWithCell;
SetCellAnchored( rObj, aAnchor );
// - keep also an anchor in terms of the Logic ( untransformed ) object
// because that's what we stored ( and still do ) to xml
ScDrawObjData aVisAnchor;
GetCellAnchorFromPosition( rObj, aVisAnchor, rDoc, nTab );
aVisAnchor.mbResizeWithCell = bResizeWithCell;
SetVisualCellAnchored( rObj, aVisAnchor );
// absolutely necessary to set flag that in order to prevent ScDrawLayer::RecalcPos
// doing an initialisation hack
if ( ScDrawObjData* pAnchor = GetObjData( &rObj ) )
{
pAnchor->setShapeRect(&rDoc, rObj.GetSnapRect());
}
}
void ScDrawLayer::GetCellAnchorFromPosition( const SdrObject &rObj, ScDrawObjData &rAnchor, const ScDocument &rDoc, SCTAB nTab, bool bUseLogicRect, bool bHiddenAsZero )
{
tools::Rectangle aObjRect( bUseLogicRect ? rObj.GetLogicRect() : rObj.GetSnapRect() );
ScRange aRange = rDoc.GetRange( nTab, aObjRect, bHiddenAsZero );
tools::Rectangle aCellRect;
rAnchor.maStart = aRange.aStart;
aCellRect = rDoc.GetMMRect( aRange.aStart.Col(), aRange.aStart.Row(),
aRange.aStart.Col(), aRange.aStart.Row(), aRange.aStart.Tab(), bHiddenAsZero );
rAnchor.maStartOffset.setY( aObjRect.Top()-aCellRect.Top() );
if (!rDoc.IsNegativePage(nTab))
rAnchor.maStartOffset.setX( aObjRect.Left()-aCellRect.Left() );
else
rAnchor.maStartOffset.setX( aCellRect.Right()-aObjRect.Right() );
rAnchor.maEnd = aRange.aEnd;
aCellRect = rDoc.GetMMRect( aRange.aEnd.Col(), aRange.aEnd.Row(),
aRange.aEnd.Col(), aRange.aEnd.Row(), aRange.aEnd.Tab(), bHiddenAsZero );
rAnchor.maEndOffset.setY( aObjRect.Bottom()-aCellRect.Top() );
if (!rDoc.IsNegativePage(nTab))
rAnchor.maEndOffset.setX( aObjRect.Right()-aCellRect.Left() );
else
rAnchor.maEndOffset.setX( aCellRect.Right()-aObjRect.Left() );
}
void ScDrawLayer::UpdateCellAnchorFromPositionEnd( const SdrObject &rObj, ScDrawObjData &rAnchor, const ScDocument &rDoc, SCTAB nTab, bool bUseLogicRect )
{
tools::Rectangle aObjRect(bUseLogicRect ? rObj.GetLogicRect() : rObj.GetSnapRect());
ScRange aRange = rDoc.GetRange( nTab, aObjRect );
ScDrawObjData* pAnchor = &rAnchor;
pAnchor->maEnd = aRange.aEnd;
tools::Rectangle aCellRect;
aCellRect = rDoc.GetMMRect( aRange.aEnd.Col(), aRange.aEnd.Row(),
aRange.aEnd.Col(), aRange.aEnd.Row(), aRange.aEnd.Tab() );
pAnchor->maEndOffset.setY( aObjRect.Bottom()-aCellRect.Top() );
if (!rDoc.IsNegativePage(nTab))
pAnchor->maEndOffset.setX( aObjRect.Right()-aCellRect.Left() );
else
pAnchor->maEndOffset.setX( aCellRect.Right()-aObjRect.Left() );
}
bool ScDrawLayer::IsCellAnchored( const SdrObject& rObj )
{
// Cell anchored object always has a user data, to store the anchor cell
// info. If it doesn't then it's page-anchored.
return GetFirstUserDataOfType(&rObj, SC_UD_OBJDATA) != nullptr;
}
bool ScDrawLayer::IsResizeWithCell( const SdrObject& rObj )
{
// Cell anchored object always has a user data, to store the anchor cell
// info. If it doesn't then it's page-anchored.
ScDrawObjData* pDrawObjData = GetObjData(const_cast<SdrObject*>(&rObj));
if (!pDrawObjData)
return false;
return pDrawObjData->mbResizeWithCell;
}
void ScDrawLayer::SetPageAnchored( SdrObject &rObj )
{
DeleteFirstUserDataOfType(&rObj, SC_UD_OBJDATA);
DeleteFirstUserDataOfType(&rObj, SC_UD_OBJDATA);
}
ScAnchorType ScDrawLayer::GetAnchorType( const SdrObject &rObj )
{
//If this object has a cell anchor associated with it
//then its cell-anchored, otherwise its page-anchored
const ScDrawObjData* pObjData = ScDrawLayer::GetObjData(const_cast<SdrObject*>(&rObj));
// When there is no cell anchor, it is page anchored.
if (!pObjData)
return SCA_PAGE;
// It's cell-anchored, check if the object resizes with the cell
if (pObjData->mbResizeWithCell)
return SCA_CELL_RESIZE;
return SCA_CELL;
}
std::vector<SdrObject*>
ScDrawLayer::GetObjectsAnchoredToRows(SCTAB nTab, SCROW nStartRow, SCROW nEndRow)
{
SdrPage* pPage = GetPage(static_cast<sal_uInt16>(nTab));
if (!pPage || pPage->GetObjCount() < 1)
return std::vector<SdrObject*>();
std::vector<SdrObject*> aObjects;
SdrObjListIter aIter( pPage, SdrIterMode::Flat );
SdrObject* pObject = aIter.Next();
ScRange aRange( 0, nStartRow, nTab, MAXCOL, nEndRow, nTab);
while (pObject)
{
if (!dynamic_cast<SdrCaptionObj*>(pObject)) // Caption objects are handled differently
{
ScDrawObjData* pObjData = GetObjData(pObject);
if (pObjData && aRange.In(pObjData->maStart))
aObjects.push_back(pObject);
}
pObject = aIter.Next();
}
return aObjects;
}
std::map<SCROW, std::vector<SdrObject*>>
ScDrawLayer::GetObjectsAnchoredToRange(SCTAB nTab, SCCOL nCol, SCROW nStartRow, SCROW nEndRow)
{
SdrPage* pPage = GetPage(static_cast<sal_uInt16>(nTab));
if (!pPage || pPage->GetObjCount() < 1)
return std::map<SCROW, std::vector<SdrObject*>>();
std::map<SCROW, std::vector<SdrObject*>> aRowObjects;
SdrObjListIter aIter( pPage, SdrIterMode::Flat );
SdrObject* pObject = aIter.Next();
ScRange aRange( nCol, nStartRow, nTab, nCol, nEndRow, nTab);
while (pObject)
{
if (!dynamic_cast<SdrCaptionObj*>(pObject)) // Caption objects are handled differently
{
ScDrawObjData* pObjData = GetObjData(pObject);
if (pObjData && aRange.In(pObjData->maStart))
aRowObjects[pObjData->maStart.Row()].push_back(pObject);
}
pObject = aIter.Next();
}
return aRowObjects;
}
bool ScDrawLayer::HasObjectsAnchoredInRange(const ScRange& rRange)
{
// This only works for one table at a time
assert(rRange.aStart.Tab() == rRange.aEnd.Tab());
SdrPage* pPage = GetPage(static_cast<sal_uInt16>(rRange.aStart.Tab()));
if (!pPage || pPage->GetObjCount() < 1)
return false;
SdrObjListIter aIter( pPage, SdrIterMode::Flat );
SdrObject* pObject = aIter.Next();
while (pObject)
{
if (!dynamic_cast<SdrCaptionObj*>(pObject)) // Caption objects are handled differently
{
ScDrawObjData* pObjData = GetObjData(pObject);
if (pObjData && rRange.In(pObjData->maStart)) // Object is in given range
return true;
}
pObject = aIter.Next();
}
return false;
}
void ScDrawLayer::MoveObject(SdrObject* pObject, const ScAddress& rNewPosition)
{
// Get anchor data
ScDrawObjData* pObjData = GetObjData(pObject, false);
if (!pObjData)
return;
const ScAddress aOldStart = pObjData->maStart;
const ScAddress aOldEnd = pObjData->maEnd;
// Set start address
pObjData->maStart = rNewPosition;
// Set end address
const SCCOL nObjectColSpan = aOldEnd.Col() - aOldStart.Col();
const SCROW nObjectRowSpan = aOldEnd.Row() - aOldStart.Row();
ScAddress aNewEnd = rNewPosition;
aNewEnd.IncRow(nObjectRowSpan);
aNewEnd.IncCol(nObjectColSpan);
pObjData->maEnd = aNewEnd;
// Update draw object according to new anchor
RecalcPos(pObject, *pObjData, false, false);
}
ScDrawObjData* ScDrawLayer::GetNonRotatedObjData( SdrObject* pObj, bool bCreate )
{
sal_uInt16 nCount = pObj ? pObj->GetUserDataCount() : 0;
sal_uInt16 nFound = 0;
for( sal_uInt16 i = 0; i < nCount; i++ )
{
SdrObjUserData* pData = pObj->GetUserData( i );
if( pData && pData->GetInventor() == SdrInventor::ScOrSwDraw && pData->GetId() == SC_UD_OBJDATA && ++nFound == 2 )
return static_cast<ScDrawObjData*>(pData);
}
if( pObj && bCreate )
{
ScDrawObjData* pData = new ScDrawObjData;
pObj->AppendUserData(std::unique_ptr<SdrObjUserData>(pData));
return pData;
}
return nullptr;
}
ScDrawObjData* ScDrawLayer::GetObjData( SdrObject* pObj, bool bCreate )
{
if (SdrObjUserData *pData = GetFirstUserDataOfType(pObj, SC_UD_OBJDATA))
return static_cast<ScDrawObjData*>(pData);
if( pObj && bCreate )
{
ScDrawObjData* pData = new ScDrawObjData;
pObj->AppendUserData(std::unique_ptr<SdrObjUserData>(pData));
return pData;
}
return nullptr;
}
ScDrawObjData* ScDrawLayer::GetObjDataTab( SdrObject* pObj, SCTAB nTab )
{
ScDrawObjData* pData = GetObjData( pObj );
if ( pData )
{
if ( pData->maStart.IsValid() )
pData->maStart.SetTab( nTab );
if ( pData->maEnd.IsValid() )
pData->maEnd.SetTab( nTab );
}
return pData;
}
bool ScDrawLayer::IsNoteCaption( SdrObject* pObj )
{
ScDrawObjData* pData = pObj ? GetObjData( pObj ) : nullptr;
return pData && pData->meType == ScDrawObjData::CellNote;
}
ScDrawObjData* ScDrawLayer::GetNoteCaptionData( SdrObject* pObj, SCTAB nTab )
{
ScDrawObjData* pData = pObj ? GetObjDataTab( pObj, nTab ) : nullptr;
return (pData && pData->meType == ScDrawObjData::CellNote) ? pData : nullptr;
}
ScIMapInfo* ScDrawLayer::GetIMapInfo( const SdrObject* pObj )
{
return static_cast<ScIMapInfo*>(GetFirstUserDataOfType(pObj, SC_UD_IMAPDATA));
}
IMapObject* ScDrawLayer::GetHitIMapObject( const SdrObject* pObj,
const Point& rWinPoint, const vcl::Window& rCmpWnd )
{
const MapMode aMap100( MapUnit::Map100thMM );
MapMode aWndMode = rCmpWnd.GetMapMode();
Point aRelPoint( rCmpWnd.LogicToLogic( rWinPoint, &aWndMode, &aMap100 ) );
tools::Rectangle aLogRect = rCmpWnd.LogicToLogic( pObj->GetLogicRect(), &aWndMode, &aMap100 );
ScIMapInfo* pIMapInfo = GetIMapInfo( pObj );
IMapObject* pIMapObj = nullptr;
if ( pIMapInfo )
{
Size aGraphSize;
ImageMap& rImageMap = const_cast<ImageMap&>(pIMapInfo->GetImageMap());
Graphic aGraphic;
bool bObjSupported = false;
if (const SdrGrafObj* pGrafObj = dynamic_cast<const SdrGrafObj*>(pObj)) // Simple Graphics object
{
const GeoStat& rGeo = pGrafObj->GetGeoStat();
const Graphic& rGraphic = pGrafObj->GetGraphic();
// Reverse rotation
if ( rGeo.nRotationAngle )
RotatePoint( aRelPoint, aLogRect.TopLeft(), -rGeo.nSin, rGeo.nCos );
// Reverse mirroring
if ( static_cast<const SdrGrafObjGeoData*>( pGrafObj->GetGeoData() )->bMirrored )
aRelPoint.setX( aLogRect.Right() + aLogRect.Left() - aRelPoint.X() );
// Possible Unshear:
if ( rGeo.nShearAngle )
ShearPoint( aRelPoint, aLogRect.TopLeft(), -rGeo.nTan );
if ( rGraphic.GetPrefMapMode().GetMapUnit() == MapUnit::MapPixel )
aGraphSize = rCmpWnd.PixelToLogic( rGraphic.GetPrefSize(),
aMap100 );
else
aGraphSize = OutputDevice::LogicToLogic( rGraphic.GetPrefSize(),
rGraphic.GetPrefMapMode(),
aMap100 );
bObjSupported = true;
}
else if (const SdrOle2Obj* pOleObj = dynamic_cast<const SdrOle2Obj*>(pObj)) // OLE object
{
// TODO/LEAN: working with visual area needs running state
aGraphSize = pOleObj->GetOrigObjSize();
bObjSupported = true;
}
// If everything has worked out, then perform HitTest
if ( bObjSupported )
{
// Calculate relative mouse point
aRelPoint -= aLogRect.TopLeft();
pIMapObj = rImageMap.GetHitIMapObject( aGraphSize, aLogRect.GetSize(), aRelPoint );
}
}
return pIMapObj;
}
ScMacroInfo* ScDrawLayer::GetMacroInfo( SdrObject* pObj, bool bCreate )
{
if (SdrObjUserData *pData = GetFirstUserDataOfType(pObj, SC_UD_MACRODATA))
return static_cast<ScMacroInfo*>(pData);
if ( bCreate )
{
ScMacroInfo* pData = new ScMacroInfo;
pObj->AppendUserData(std::unique_ptr<SdrObjUserData>(pData));
return pData;
}
return nullptr;
}
ImageMap* ScDrawLayer::GetImageMapForObject(SdrObject* pObj)
{
ScIMapInfo* pIMapInfo = GetIMapInfo( pObj );
if ( pIMapInfo )
{
return const_cast<ImageMap*>( &(pIMapInfo->GetImageMap()) );
}
return nullptr;
}
void ScDrawLayer::SetGlobalDrawPersist(SfxObjectShell* pPersist)
{
OSL_ENSURE(!pGlobalDrawPersist,"Multiple SetGlobalDrawPersist");
pGlobalDrawPersist = pPersist;
}
void ScDrawLayer::SetChanged( bool bFlg /* = true */ )
{
if ( bFlg && pDoc )
pDoc->SetChartListenerCollectionNeedsUpdate( true );
FmFormModel::SetChanged( bFlg );
}
css::uno::Reference< css::uno::XInterface > ScDrawLayer::createUnoModel()
{
css::uno::Reference< css::uno::XInterface > xRet;
if( pDoc && pDoc->GetDocumentShell() )
xRet = pDoc->GetDocumentShell()->GetModel();
return xRet;
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
↑ V595 The 'pObj' pointer was utilized before it was verified against nullptr. Check lines: 2184, 2188.